+++ /dev/null
-From d59fe652e3674e98caa688b4ddc9308007267adc Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 19 Aug 2013 13:49:52 +0200
-Subject: [PATCH] pinctrl: ralink; add pinctrl driver
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/Kconfig | 2 +
- arch/mips/ralink/common.h | 21 +--
- arch/mips/ralink/dts/mt7620a.dtsi | 7 +
- drivers/pinctrl/Kconfig | 5 +
- drivers/pinctrl/Makefile | 1 +
- drivers/pinctrl/pinctrl-rt2880.c | 368 +++++++++++++++++++++++++++++++++++++
- 6 files changed, 385 insertions(+), 19 deletions(-)
- create mode 100644 drivers/pinctrl/pinctrl-rt2880.c
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -446,6 +446,8 @@ config RALINK
- select HAVE_MACH_CLKDEV
- select CLKDEV_LOOKUP
- select ARCH_REQUIRE_GPIOLIB
-+ select PINCTRL
-+ select PINCTRL_RT2880
-
- config SGI_IP22
- bool "SGI IP22 (Indy/Indigo2)"
---- a/drivers/pinctrl/Kconfig
-+++ b/drivers/pinctrl/Kconfig
-@@ -114,6 +114,11 @@ config PINCTRL_LANTIQ
- select PINMUX
- select PINCONF
-
-+config PINCTRL_RT2880
-+ bool
-+ depends on RALINK
-+ select PINMUX
-+
- config PINCTRL_FALCON
- bool
- depends on SOC_FALCON
---- a/drivers/pinctrl/Makefile
-+++ b/drivers/pinctrl/Makefile
-@@ -45,6 +45,7 @@ obj-$(CONFIG_PINCTRL_EXYNOS5440) += pinc
- obj-$(CONFIG_PINCTRL_S3C64XX) += pinctrl-s3c64xx.o
- obj-$(CONFIG_PINCTRL_XWAY) += pinctrl-xway.o
- obj-$(CONFIG_PINCTRL_LANTIQ) += pinctrl-lantiq.o
-+obj-$(CONFIG_PINCTRL_RT2880) += pinctrl-rt2880.o
-
- obj-$(CONFIG_PLAT_ORION) += mvebu/
- obj-$(CONFIG_ARCH_SHMOBILE) += sh-pfc/
---- /dev/null
-+++ b/drivers/pinctrl/pinctrl-rt2880.c
-@@ -0,0 +1,466 @@
-+/*
-+ * linux/drivers/pinctrl/pinctrl-rt2880.c
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * publishhed by the Free Software Foundation.
-+ *
-+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/device.h>
-+#include <linux/io.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+#include <linux/of.h>
-+#include <linux/pinctrl/pinctrl.h>
-+#include <linux/pinctrl/pinconf.h>
-+#include <linux/pinctrl/pinmux.h>
-+#include <linux/pinctrl/consumer.h>
-+#include <linux/pinctrl/machine.h>
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+#include <asm/mach-ralink/pinmux.h>
-+#include <asm/mach-ralink/mt7620.h>
-+
-+#include "core.h"
-+
-+#define SYSC_REG_GPIO_MODE 0x60
-+
-+struct rt2880_priv {
-+ struct device *dev;
-+
-+ struct pinctrl_pin_desc *pads;
-+ struct pinctrl_desc *desc;
-+
-+ struct rt2880_pmx_func **func;
-+ int func_count;
-+
-+ struct rt2880_pmx_group *groups;
-+ const char **group_names;
-+ int group_count;
-+
-+ uint8_t *gpio;
-+ int max_pins;
-+};
-+
-+struct rt2880_pmx_group *rt2880_pinmux_data = NULL;
-+
-+static int rt2880_get_group_count(struct pinctrl_dev *pctrldev)
-+{
-+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
-+
-+ return p->group_count;
-+}
-+
-+static const char *rt2880_get_group_name(struct pinctrl_dev *pctrldev,
-+ unsigned group)
-+{
-+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
-+
-+ if (group >= p->group_count)
-+ return NULL;
-+
-+ return p->group_names[group];
-+}
-+
-+static int rt2880_get_group_pins(struct pinctrl_dev *pctrldev,
-+ unsigned group,
-+ const unsigned **pins,
-+ unsigned *num_pins)
-+{
-+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
-+
-+ if (group >= p->group_count)
-+ return -EINVAL;
-+
-+ *pins = p->groups[group].func[0].pins;
-+ *num_pins = p->groups[group].func[0].pin_count;
-+
-+ return 0;
-+}
-+
-+static void rt2880_pinctrl_dt_free_map(struct pinctrl_dev *pctrldev,
-+ struct pinctrl_map *map, unsigned num_maps)
-+{
-+ int i;
-+
-+ for (i = 0; i < num_maps; i++)
-+ if (map[i].type == PIN_MAP_TYPE_CONFIGS_PIN ||
-+ map[i].type == PIN_MAP_TYPE_CONFIGS_GROUP)
-+ kfree(map[i].data.configs.configs);
-+ kfree(map);
-+}
-+
-+static void rt2880_pinctrl_pin_dbg_show(struct pinctrl_dev *pctrldev,
-+ struct seq_file *s,
-+ unsigned offset)
-+{
-+ seq_printf(s, "ralink pio");
-+}
-+
-+static void rt2880_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctrldev,
-+ struct device_node *np,
-+ struct pinctrl_map **map)
-+{
-+ const char *function;
-+ int func = of_property_read_string(np, "ralink,function", &function);
-+ int grps = of_property_count_strings(np, "ralink,group");
-+ int i;
-+
-+ if (func || !grps)
-+ return;
-+
-+ for (i = 0; i < grps; i++) {
-+ const char *group;
-+
-+ of_property_read_string_index(np, "ralink,group", i, &group);
-+
-+ (*map)->type = PIN_MAP_TYPE_MUX_GROUP;
-+ (*map)->name = function;
-+ (*map)->data.mux.group = group;
-+ (*map)->data.mux.function = function;
-+ (*map)++;
-+ }
-+}
-+
-+static int rt2880_pinctrl_dt_node_to_map(struct pinctrl_dev *pctrldev,
-+ struct device_node *np_config,
-+ struct pinctrl_map **map,
-+ unsigned *num_maps)
-+{
-+ int max_maps = 0;
-+ struct pinctrl_map *tmp;
-+ struct device_node *np;
-+
-+ for_each_child_of_node(np_config, np) {
-+ int ret = of_property_count_strings(np, "ralink,group");
-+
-+ if (ret >= 0)
-+ max_maps += ret;
-+ }
-+
-+ if (!max_maps)
-+ return max_maps;
-+
-+ *map = kzalloc(max_maps * sizeof(struct pinctrl_map), GFP_KERNEL);
-+ if (!*map)
-+ return -ENOMEM;
-+
-+ tmp = *map;
-+
-+ for_each_child_of_node(np_config, np)
-+ rt2880_pinctrl_dt_subnode_to_map(pctrldev, np, &tmp);
-+ *num_maps = max_maps;
-+
-+ return 0;
-+}
-+
-+static const struct pinctrl_ops rt2880_pctrl_ops = {
-+ .get_groups_count = rt2880_get_group_count,
-+ .get_group_name = rt2880_get_group_name,
-+ .get_group_pins = rt2880_get_group_pins,
-+ .pin_dbg_show = rt2880_pinctrl_pin_dbg_show,
-+ .dt_node_to_map = rt2880_pinctrl_dt_node_to_map,
-+ .dt_free_map = rt2880_pinctrl_dt_free_map,
-+};
-+
-+static int rt2880_pmx_func_count(struct pinctrl_dev *pctrldev)
-+{
-+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
-+
-+ return p->func_count;
-+}
-+
-+static const char *rt2880_pmx_func_name(struct pinctrl_dev *pctrldev,
-+ unsigned func)
-+{
-+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
-+
-+ return p->func[func]->name;
-+}
-+
-+static int rt2880_pmx_group_get_groups(struct pinctrl_dev *pctrldev,
-+ unsigned func,
-+ const char * const **groups,
-+ unsigned * const num_groups)
-+{
-+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
-+
-+ if (p->func[func]->group_count == 1)
-+ *groups = &p->group_names[p->func[func]->groups[0]];
-+ else
-+ *groups = p->group_names;
-+
-+ *num_groups = p->func[func]->group_count;
-+
-+ return 0;
-+}
-+
-+static int rt2880_pmx_group_enable(struct pinctrl_dev *pctrldev,
-+ unsigned func,
-+ unsigned group)
-+{
-+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
-+ u32 mode = 0;
-+
-+ /* dont allow double use */
-+ if (p->groups[group].enabled) {
-+ dev_err(p->dev, "%s is already enabled\n", p->groups[group].name);
-+ return -EBUSY;
-+ }
-+
-+ p->groups[group].enabled = 1;
-+ p->func[func]->enabled = 1;
-+
-+ mode = rt_sysc_r32(SYSC_REG_GPIO_MODE);
-+ mode &= ~(p->groups[group].mask << p->groups[group].shift);
-+
-+ /* function 0 is gpio and needs special handling */
-+ if (func == 0) {
-+ int i;
-+
-+
-+ mode |= p->groups[group].gpio << p->groups[group].shift;
-+ /* mark the pins as gpio */
-+ for (i = 0; i < p->groups[group].func[0].pin_count; i++)
-+ p->gpio[p->groups[group].func[0].pins[i]] = 1;
-+ } else {
-+ mode |= p->func[func]->value << p->groups[group].shift;
-+ }
-+ rt_sysc_w32(mode, SYSC_REG_GPIO_MODE);
-+
-+
-+ return 0;
-+}
-+
-+static int rt2880_pmx_group_gpio_request_enable(struct pinctrl_dev *pctrldev,
-+ struct pinctrl_gpio_range *range,
-+ unsigned pin)
-+{
-+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
-+
-+ if (!p->gpio[pin]) {
-+ dev_err(p->dev, "pin %d is not set to gpio mux\n", pin);
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+static const struct pinmux_ops rt2880_pmx_group_ops = {
-+ .get_functions_count = rt2880_pmx_func_count,
-+ .get_function_name = rt2880_pmx_func_name,
-+ .get_function_groups = rt2880_pmx_group_get_groups,
-+ .enable = rt2880_pmx_group_enable,
-+ .gpio_request_enable = rt2880_pmx_group_gpio_request_enable,
-+};
-+
-+static struct pinctrl_desc rt2880_pctrl_desc = {
-+ .owner = THIS_MODULE,
-+ .name = "rt2880-pinmux",
-+ .pctlops = &rt2880_pctrl_ops,
-+ .pmxops = &rt2880_pmx_group_ops,
-+};
-+
-+static struct rt2880_pmx_func gpio_func = {
-+ .name = "gpio",
-+};
-+
-+static int rt2880_pinmux_index(struct rt2880_priv *p)
-+{
-+ struct rt2880_pmx_func **f;
-+ struct rt2880_pmx_group *mux = p->groups;
-+ int i, j, c = 0;
-+
-+ /* count the mux functions */
-+ while (mux->name) {
-+ p->group_count++;
-+ mux++;
-+ }
-+
-+ /* allocate the group names array needed by the gpio function */
-+ p->group_names = devm_kzalloc(p->dev, sizeof(char *) * p->group_count, GFP_KERNEL);
-+ if (!p->group_names)
-+ return -1;
-+
-+ for (i = 0; i < p->group_count; i++) {
-+ p->group_names[i] = p->groups[i].name;
-+ p->func_count += p->groups[i].func_count;
-+ }
-+
-+ /* we have a dummy function[0] for gpio */
-+ p->func_count++;
-+
-+ /* allocate our function and group mapping index buffers */
-+ f = p->func = devm_kzalloc(p->dev, sizeof(struct rt2880_pmx_func) * p->func_count, GFP_KERNEL);
-+ gpio_func.groups = devm_kzalloc(p->dev, sizeof(int) * p->group_count, GFP_KERNEL);
-+ if (!f || !gpio_func.groups)
-+ return -1;
-+
-+ /* add a backpointer to the function so it knows its group */
-+ gpio_func.group_count = p->group_count;
-+ for (i = 0; i < gpio_func.group_count; i++)
-+ gpio_func.groups[i] = i;
-+
-+ f[c] = &gpio_func;
-+ c++;
-+
-+ /* add remaining functions */
-+ for (i = 0; i < p->group_count; i++) {
-+ for (j = 0; j < p->groups[i].func_count; j++) {
-+ f[c] = &p->groups[i].func[j];
-+ f[c]->groups = devm_kzalloc(p->dev, sizeof(int), GFP_KERNEL);
-+ f[c]->groups[0] = i;
-+ f[c]->group_count = 1;
-+ c++;
-+ }
-+ }
-+ return 0;
-+}
-+
-+static int rt2880_pinmux_pins(struct rt2880_priv *p)
-+{
-+ int i, j;
-+
-+ /* loop over the functions and initialize the pins array. also work out the highest pin used */
-+ for (i = 0; i < p->func_count; i++) {
-+ int pin;
-+
-+ if (!p->func[i]->pin_count)
-+ continue;
-+
-+ p->func[i]->pins = devm_kzalloc(p->dev, sizeof(int) * p->func[i]->pin_count, GFP_KERNEL);
-+ for (j = 0; j < p->func[i]->pin_count; j++)
-+ p->func[i]->pins[j] = p->func[i]->pin_first + j;
-+
-+ pin = p->func[i]->pin_first + p->func[i]->pin_count;
-+ if (pin > p->max_pins)
-+ p->max_pins = pin;
-+ }
-+
-+ /* the buffer that tells us which pins are gpio */
-+ p->gpio = devm_kzalloc(p->dev,sizeof(uint8_t) * p->max_pins,
-+ GFP_KERNEL);
-+ /* the pads needed to tell pinctrl about our pins */
-+ p->pads = devm_kzalloc(p->dev,
-+ sizeof(struct pinctrl_pin_desc) * p->max_pins,
-+ GFP_KERNEL);
-+ if (!p->pads || !p->gpio ) {
-+ dev_err(p->dev, "Failed to allocate gpio data\n");
-+ return -ENOMEM;
-+ }
-+
-+ memset(p->gpio, 1, sizeof(uint8_t) * p->max_pins);
-+ for (i = 0; i < p->func_count; i++) {
-+ if (!p->func[i]->pin_count)
-+ continue;
-+
-+ for (j = 0; j < p->func[i]->pin_count; j++)
-+ p->gpio[p->func[i]->pins[j]] = 0;
-+ }
-+
-+ /* pin 0 is always a gpio */
-+ p->gpio[0] = 1;
-+
-+ /* set the pads */
-+ for (i = 0; i < p->max_pins; i++) {
-+ /* strlen("ioXY") + 1 = 5 */
-+ char *name = devm_kzalloc(p->dev, 5, GFP_KERNEL);
-+
-+ if (!name) {
-+ dev_err(p->dev, "Failed to allocate pad name\n");
-+ return -ENOMEM;
-+ }
-+ snprintf(name, 5, "io%d", i);
-+ p->pads[i].number = i;
-+ p->pads[i].name = name;
-+ }
-+ p->desc->pins = p->pads;
-+ p->desc->npins = p->max_pins;
-+
-+ return 0;
-+}
-+
-+static int rt2880_pinmux_probe(struct platform_device *pdev)
-+{
-+ struct rt2880_priv *p;
-+ struct pinctrl_dev *dev;
-+ struct device_node *np;
-+
-+ if (!rt2880_pinmux_data)
-+ return -ENOSYS;
-+
-+ /* setup the private data */
-+ p = devm_kzalloc(&pdev->dev, sizeof(struct rt2880_priv), GFP_KERNEL);
-+ if (!p)
-+ return -ENOMEM;
-+
-+ p->dev = &pdev->dev;
-+ p->desc = &rt2880_pctrl_desc;
-+ p->groups = rt2880_pinmux_data;
-+ platform_set_drvdata(pdev, p);
-+
-+ /* init the device */
-+ if (rt2880_pinmux_index(p)) {
-+ dev_err(&pdev->dev, "failed to load index\n");
-+ return -EINVAL;
-+ }
-+ if (rt2880_pinmux_pins(p)) {
-+ dev_err(&pdev->dev, "failed to load pins\n");
-+ return -EINVAL;
-+ }
-+ dev = pinctrl_register(p->desc, &pdev->dev, p);
-+ if (IS_ERR(dev))
-+ return PTR_ERR(dev);
-+
-+ /* finalize by adding gpio ranges for enables gpio controllers */
-+ for_each_compatible_node(np, NULL, "ralink,rt2880-gpio") {
-+ const __be32 *ngpio, *gpiobase;
-+ struct pinctrl_gpio_range *range;
-+ char *name;
-+
-+ if (!of_device_is_available(np))
-+ continue;
-+
-+ ngpio = of_get_property(np, "ralink,num-gpios", NULL);
-+ gpiobase = of_get_property(np, "ralink,gpio-base", NULL);
-+ if (!ngpio || !gpiobase) {
-+ dev_err(&pdev->dev, "failed to load chip info\n");
-+ return -EINVAL;
-+ }
-+
-+ range = devm_kzalloc(p->dev, sizeof(struct pinctrl_gpio_range) + 4, GFP_KERNEL);
-+ range->name = name = (char *) &range[1];
-+ sprintf(name, "pio");
-+ range->npins = __be32_to_cpu(*ngpio);
-+ range->base = __be32_to_cpu(*gpiobase);
-+ range->pin_base = range->base;
-+ pinctrl_add_gpio_range(dev, range);
-+ }
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id rt2880_pinmux_match[] = {
-+ { .compatible = "ralink,rt2880-pinmux" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, rt2880_pinmux_match);
-+
-+static struct platform_driver rt2880_pinmux_driver = {
-+ .probe = rt2880_pinmux_probe,
-+ .driver = {
-+ .name = "rt2880-pinmux",
-+ .owner = THIS_MODULE,
-+ .of_match_table = rt2880_pinmux_match,
-+ },
-+};
-+
-+int __init rt2880_pinmux_init(void)
-+{
-+ return platform_driver_register(&rt2880_pinmux_driver);
-+}
-+
-+core_initcall_sync(rt2880_pinmux_init);
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ralink/pinmux.h
-@@ -0,0 +1,53 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * publishhed by the Free Software Foundation.
-+ *
-+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#ifndef _RT288X_PINMUX_H__
-+#define _RT288X_PINMUX_H__
-+
-+#define FUNC(name, value, pin_first, pin_count) { name, value, pin_first, pin_count }
-+#define GRP(_name, _func, _mask, _shift) \
-+ { .name = _name, .mask = _mask, .shift = _shift, \
-+ .func = _func, .gpio = _mask, \
-+ .func_count = ARRAY_SIZE(_func) }
-+
-+#define GRP_G(_name, _func, _mask, _gpio, _shift) \
-+ { .name = _name, .mask = _mask, .shift = _shift, \
-+ .func = _func, .gpio = _gpio, \
-+ .func_count = ARRAY_SIZE(_func) }
-+
-+struct rt2880_pmx_group;
-+
-+struct rt2880_pmx_func {
-+ const char *name;
-+ const char value;
-+
-+ int pin_first;
-+ int pin_count;
-+ int *pins;
-+
-+ int *groups;
-+ int group_count;
-+
-+ int enabled;
-+};
-+
-+struct rt2880_pmx_group {
-+ const char *name;
-+ int enabled;
-+
-+ const u32 shift;
-+ const char mask;
-+ const char gpio;
-+
-+ struct rt2880_pmx_func *func;
-+ int func_count;
-+};
-+
-+extern struct rt2880_pmx_group *rt2880_pinmux_data;
-+
-+#endif
---- a/arch/mips/ralink/mt7620.c
-+++ b/arch/mips/ralink/mt7620.c
-@@ -17,6 +17,7 @@
- #include <asm/mipsregs.h>
- #include <asm/mach-ralink/ralink_regs.h>
- #include <asm/mach-ralink/mt7620.h>
-+#include <asm/mach-ralink/pinmux.h>
-
- #include "common.h"
-
-@@ -48,118 +49,58 @@ static int dram_type;
- /* the pll dividers */
- static u32 mt7620_clk_divider[] = { 2, 3, 4, 8 };
-
--static struct ralink_pinmux_grp mode_mux[] = {
-- {
-- .name = "i2c",
-- .mask = MT7620_GPIO_MODE_I2C,
-- .gpio_first = 1,
-- .gpio_last = 2,
-- }, {
-- .name = "spi",
-- .mask = MT7620_GPIO_MODE_SPI,
-- .gpio_first = 3,
-- .gpio_last = 6,
-- }, {
-- .name = "uartlite",
-- .mask = MT7620_GPIO_MODE_UART1,
-- .gpio_first = 15,
-- .gpio_last = 16,
-- }, {
-- .name = "wdt",
-- .mask = MT7620_GPIO_MODE_WDT,
-- .gpio_first = 17,
-- .gpio_last = 17,
-- }, {
-- .name = "mdio",
-- .mask = MT7620_GPIO_MODE_MDIO,
-- .gpio_first = 22,
-- .gpio_last = 23,
-- }, {
-- .name = "rgmii1",
-- .mask = MT7620_GPIO_MODE_RGMII1,
-- .gpio_first = 24,
-- .gpio_last = 35,
-- }, {
-- .name = "spi refclk",
-- .mask = MT7620_GPIO_MODE_SPI_REF_CLK,
-- .gpio_first = 37,
-- .gpio_last = 39,
-- }, {
-- .name = "jtag",
-- .mask = MT7620_GPIO_MODE_JTAG,
-- .gpio_first = 40,
-- .gpio_last = 44,
-- }, {
-- /* shared lines with jtag */
-- .name = "ephy",
-- .mask = MT7620_GPIO_MODE_EPHY,
-- .gpio_first = 40,
-- .gpio_last = 44,
-- }, {
-- .name = "nand",
-- .mask = MT7620_GPIO_MODE_JTAG,
-- .gpio_first = 45,
-- .gpio_last = 59,
-- }, {
-- .name = "rgmii2",
-- .mask = MT7620_GPIO_MODE_RGMII2,
-- .gpio_first = 60,
-- .gpio_last = 71,
-- }, {
-- .name = "wled",
-- .mask = MT7620_GPIO_MODE_WLED,
-- .gpio_first = 72,
-- .gpio_last = 72,
-- }, {0}
-+static struct rt2880_pmx_func i2c_grp[] = { FUNC("i2c", 0, 1, 2) };
-+static struct rt2880_pmx_func spi_grp[] = { FUNC("spi", 0, 3, 4) };
-+static struct rt2880_pmx_func uartlite_grp[] = { FUNC("uartlite", 0, 15, 2) };
-+static struct rt2880_pmx_func mdio_grp[] = { FUNC("mdio", 0, 22, 2) };
-+static struct rt2880_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 24, 12) };
-+static struct rt2880_pmx_func refclk_grp[] = { FUNC("spi refclk", 0, 37, 3) };
-+static struct rt2880_pmx_func ephy_grp[] = { FUNC("ephy", 0, 40, 5) };
-+static struct rt2880_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 0, 60, 12) };
-+static struct rt2880_pmx_func wled_grp[] = { FUNC("wled", 0, 72, 1) };
-+static struct rt2880_pmx_func pa_grp[] = { FUNC("pa", 0, 18, 4) };
-+static struct rt2880_pmx_func uartf_grp[] = {
-+ FUNC("uartf", MT7620_GPIO_MODE_UARTF, 7, 8),
-+ FUNC("pcm uartf", MT7620_GPIO_MODE_PCM_UARTF, 7, 8),
-+ FUNC("pcm i2s", MT7620_GPIO_MODE_PCM_I2S, 7, 8),
-+ FUNC("i2s uartf", MT7620_GPIO_MODE_I2S_UARTF, 7, 8),
-+ FUNC("pcm gpio", MT7620_GPIO_MODE_PCM_GPIO, 11, 4),
-+ FUNC("gpio uartf", MT7620_GPIO_MODE_GPIO_UARTF, 7, 4),
-+ FUNC("gpio i2s", MT7620_GPIO_MODE_GPIO_I2S, 7, 4),
- };
--
--static struct ralink_pinmux_grp uart_mux[] = {
-- {
-- .name = "uartf",
-- .mask = MT7620_GPIO_MODE_UARTF,
-- .gpio_first = 7,
-- .gpio_last = 14,
-- }, {
-- .name = "pcm uartf",
-- .mask = MT7620_GPIO_MODE_PCM_UARTF,
-- .gpio_first = 7,
-- .gpio_last = 14,
-- }, {
-- .name = "pcm i2s",
-- .mask = MT7620_GPIO_MODE_PCM_I2S,
-- .gpio_first = 7,
-- .gpio_last = 14,
-- }, {
-- .name = "i2s uartf",
-- .mask = MT7620_GPIO_MODE_I2S_UARTF,
-- .gpio_first = 7,
-- .gpio_last = 14,
-- }, {
-- .name = "pcm gpio",
-- .mask = MT7620_GPIO_MODE_PCM_GPIO,
-- .gpio_first = 11,
-- .gpio_last = 14,
-- }, {
-- .name = "gpio uartf",
-- .mask = MT7620_GPIO_MODE_GPIO_UARTF,
-- .gpio_first = 7,
-- .gpio_last = 10,
-- }, {
-- .name = "gpio i2s",
-- .mask = MT7620_GPIO_MODE_GPIO_I2S,
-- .gpio_first = 7,
-- .gpio_last = 10,
-- }, {
-- .name = "gpio",
-- .mask = MT7620_GPIO_MODE_GPIO,
-- }, {0}
-+static struct rt2880_pmx_func wdt_grp[] = {
-+ FUNC("wdt rst", 0, 17, 1),
-+ FUNC("wdt refclk", 0, 17, 1),
-+ };
-+static struct rt2880_pmx_func pcie_rst_grp[] = {
-+ FUNC("pcie rst", MT7620_GPIO_MODE_PCIE_RST, 36, 1),
-+ FUNC("pcie refclk", MT7620_GPIO_MODE_PCIE_REF, 36, 1)
-+};
-+static struct rt2880_pmx_func nd_sd_grp[] = {
-+ FUNC("nand", MT7620_GPIO_MODE_NAND, 45, 15),
-+ FUNC("sd", MT7620_GPIO_MODE_SD, 45, 15)
- };
-
--struct ralink_pinmux rt_gpio_pinmux = {
-- .mode = mode_mux,
-- .uart = uart_mux,
-- .uart_shift = MT7620_GPIO_MODE_UART0_SHIFT,
-- .uart_mask = MT7620_GPIO_MODE_UART0_MASK,
-+static struct rt2880_pmx_group mt7620a_pinmux_data[] = {
-+ GRP("i2c", i2c_grp, 1, MT7620_GPIO_MODE_I2C),
-+ GRP("uartf", uartf_grp, MT7620_GPIO_MODE_UART0_MASK,
-+ MT7620_GPIO_MODE_UART0_SHIFT),
-+ GRP("spi", spi_grp, 1, MT7620_GPIO_MODE_SPI),
-+ GRP("uartlite", uartlite_grp, 1, MT7620_GPIO_MODE_UART1),
-+ GRP_G("wdt", wdt_grp, MT7620_GPIO_MODE_WDT_MASK,
-+ MT7620_GPIO_MODE_WDT_GPIO, MT7620_GPIO_MODE_WDT_SHIFT),
-+ GRP("mdio", mdio_grp, 1, MT7620_GPIO_MODE_MDIO),
-+ GRP("rgmii1", rgmii1_grp, 1, MT7620_GPIO_MODE_RGMII1),
-+ GRP("spi refclk", refclk_grp, 1, MT7620_GPIO_MODE_SPI_REF_CLK),
-+ GRP_G("pcie", pcie_rst_grp, MT7620_GPIO_MODE_PCIE_MASK,
-+ MT7620_GPIO_MODE_PCIE_GPIO, MT7620_GPIO_MODE_PCIE_SHIFT),
-+ GRP_G("nd_sd", nd_sd_grp, MT7620_GPIO_MODE_ND_SD_MASK,
-+ MT7620_GPIO_MODE_ND_SD_GPIO, MT7620_GPIO_MODE_ND_SD_SHIFT),
-+ GRP("rgmii2", rgmii2_grp, 1, MT7620_GPIO_MODE_RGMII2),
-+ GRP("wled", wled_grp, 1, MT7620_GPIO_MODE_WLED),
-+ GRP("ephy", ephy_grp, 1, MT7620_GPIO_MODE_EPHY),
-+ GRP("pa", pa_grp, 1, MT7620_GPIO_MODE_PA),
-+ { 0 }
- };
-
- void __init ralink_clk_init(void)
-@@ -281,4 +222,6 @@ void prom_soc_init(struct ralink_soc_inf
- (pmu0 & PMU_SW_SET) ? ("sw") : ("hw"));
- pr_info("Digital PMU set to %s control\n",
- (pmu1 & DIG_SW_SEL) ? ("sw") : ("hw"));
-+
-+ rt2880_pinmux_data = mt7620a_pinmux_data;
- }
---- a/arch/mips/ralink/rt305x.c
-+++ b/arch/mips/ralink/rt305x.c
-@@ -17,90 +17,71 @@
- #include <asm/mipsregs.h>
- #include <asm/mach-ralink/ralink_regs.h>
- #include <asm/mach-ralink/rt305x.h>
-+#include <asm/mach-ralink/pinmux.h>
-
- #include "common.h"
-
- enum rt305x_soc_type rt305x_soc;
-
--static struct ralink_pinmux_grp mode_mux[] = {
-- {
-- .name = "i2c",
-- .mask = RT305X_GPIO_MODE_I2C,
-- .gpio_first = RT305X_GPIO_I2C_SD,
-- .gpio_last = RT305X_GPIO_I2C_SCLK,
-- }, {
-- .name = "spi",
-- .mask = RT305X_GPIO_MODE_SPI,
-- .gpio_first = RT305X_GPIO_SPI_EN,
-- .gpio_last = RT305X_GPIO_SPI_CLK,
-- }, {
-- .name = "uartlite",
-- .mask = RT305X_GPIO_MODE_UART1,
-- .gpio_first = RT305X_GPIO_UART1_TXD,
-- .gpio_last = RT305X_GPIO_UART1_RXD,
-- }, {
-- .name = "jtag",
-- .mask = RT305X_GPIO_MODE_JTAG,
-- .gpio_first = RT305X_GPIO_JTAG_TDO,
-- .gpio_last = RT305X_GPIO_JTAG_TDI,
-- }, {
-- .name = "mdio",
-- .mask = RT305X_GPIO_MODE_MDIO,
-- .gpio_first = RT305X_GPIO_MDIO_MDC,
-- .gpio_last = RT305X_GPIO_MDIO_MDIO,
-- }, {
-- .name = "sdram",
-- .mask = RT305X_GPIO_MODE_SDRAM,
-- .gpio_first = RT305X_GPIO_SDRAM_MD16,
-- .gpio_last = RT305X_GPIO_SDRAM_MD31,
-- }, {
-- .name = "rgmii",
-- .mask = RT305X_GPIO_MODE_RGMII,
-- .gpio_first = RT305X_GPIO_GE0_TXD0,
-- .gpio_last = RT305X_GPIO_GE0_RXCLK,
-- }, {0}
-+static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
-+static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
-+static struct rt2880_pmx_func uartf_func[] = {
-+ FUNC("uartf", RT305X_GPIO_MODE_UARTF, 7, 8),
-+ FUNC("pcm uartf", RT305X_GPIO_MODE_PCM_UARTF, 7, 8),
-+ FUNC("pcm i2s", RT305X_GPIO_MODE_PCM_I2S, 7, 8),
-+ FUNC("i2s uartf", RT305X_GPIO_MODE_I2S_UARTF, 7, 8),
-+ FUNC("pcm gpio", RT305X_GPIO_MODE_PCM_GPIO, 11, 4),
-+ FUNC("gpio uartf", RT305X_GPIO_MODE_GPIO_UARTF, 7, 4),
-+ FUNC("gpio i2s", RT305X_GPIO_MODE_GPIO_I2S, 7, 4),
-+};
-+static struct rt2880_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 15, 2) };
-+static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
-+static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
-+static struct rt2880_pmx_func rt5350_led_func[] = { FUNC("led", 0, 22, 5) };
-+static struct rt2880_pmx_func sdram_func[] = { FUNC("sdram", 0, 24, 16) };
-+static struct rt2880_pmx_func rt3352_rgmii_func[] = { FUNC("rgmii", 0, 24, 12) };
-+static struct rt2880_pmx_func rgmii_func[] = { FUNC("rgmii", 0, 40, 12) };
-+static struct rt2880_pmx_func rt3352_lna_func[] = { FUNC("lna", 0, 36, 2) };
-+static struct rt2880_pmx_func rt3352_pa_func[] = { FUNC("pa", 0, 38, 2) };
-+static struct rt2880_pmx_func rt3352_led_func[] = { FUNC("led", 0, 40, 5) };
-+
-+static struct rt2880_pmx_group rt3050_pinmux_data[] = {
-+ GRP("i2c", i2c_func, 1, RT305X_GPIO_MODE_I2C),
-+ GRP("spi", spi_func, 1, RT305X_GPIO_MODE_SPI),
-+ GRP("uartf", uartf_func, RT305X_GPIO_MODE_UART0_MASK,
-+ RT305X_GPIO_MODE_UART0_SHIFT),
-+ GRP("uartlite", uartlite_func, 1, RT305X_GPIO_MODE_UART1),
-+ GRP("jtag", jtag_func, 1, RT305X_GPIO_MODE_JTAG),
-+ GRP("mdio", mdio_func, 1, RT305X_GPIO_MODE_MDIO),
-+ GRP("rgmii", rgmii_func, 1, RT305X_GPIO_MODE_RGMII),
-+ GRP("sdram", sdram_func, 1, RT305X_GPIO_MODE_SDRAM),
-+ { 0 }
-+};
-+
-+static struct rt2880_pmx_group rt3352_pinmux_data[] = {
-+ GRP("i2c", i2c_func, 1, RT305X_GPIO_MODE_I2C),
-+ GRP("spi", spi_func, 1, RT305X_GPIO_MODE_SPI),
-+ GRP("uartf", uartf_func, RT305X_GPIO_MODE_UART0_MASK,
-+ RT305X_GPIO_MODE_UART0_SHIFT),
-+ GRP("uartlite", uartlite_func, 1, RT305X_GPIO_MODE_UART1),
-+ GRP("jtag", jtag_func, 1, RT305X_GPIO_MODE_JTAG),
-+ GRP("mdio", mdio_func, 1, RT305X_GPIO_MODE_MDIO),
-+ GRP("rgmii", rt3352_rgmii_func, 1, RT305X_GPIO_MODE_RGMII),
-+ GRP("lna", rt3352_lna_func, 1, RT3352_GPIO_MODE_LNA),
-+ GRP("pa", rt3352_pa_func, 1, RT3352_GPIO_MODE_PA),
-+ GRP("led", rt3352_led_func, 1, RT5350_GPIO_MODE_PHY_LED),
-+ { 0 }
- };
-
--static struct ralink_pinmux_grp uart_mux[] = {
-- {
-- .name = "uartf",
-- .mask = RT305X_GPIO_MODE_UARTF,
-- .gpio_first = RT305X_GPIO_7,
-- .gpio_last = RT305X_GPIO_14,
-- }, {
-- .name = "pcm uartf",
-- .mask = RT305X_GPIO_MODE_PCM_UARTF,
-- .gpio_first = RT305X_GPIO_7,
-- .gpio_last = RT305X_GPIO_14,
-- }, {
-- .name = "pcm i2s",
-- .mask = RT305X_GPIO_MODE_PCM_I2S,
-- .gpio_first = RT305X_GPIO_7,
-- .gpio_last = RT305X_GPIO_14,
-- }, {
-- .name = "i2s uartf",
-- .mask = RT305X_GPIO_MODE_I2S_UARTF,
-- .gpio_first = RT305X_GPIO_7,
-- .gpio_last = RT305X_GPIO_14,
-- }, {
-- .name = "pcm gpio",
-- .mask = RT305X_GPIO_MODE_PCM_GPIO,
-- .gpio_first = RT305X_GPIO_10,
-- .gpio_last = RT305X_GPIO_14,
-- }, {
-- .name = "gpio uartf",
-- .mask = RT305X_GPIO_MODE_GPIO_UARTF,
-- .gpio_first = RT305X_GPIO_7,
-- .gpio_last = RT305X_GPIO_10,
-- }, {
-- .name = "gpio i2s",
-- .mask = RT305X_GPIO_MODE_GPIO_I2S,
-- .gpio_first = RT305X_GPIO_7,
-- .gpio_last = RT305X_GPIO_10,
-- }, {
-- .name = "gpio",
-- .mask = RT305X_GPIO_MODE_GPIO,
-- }, {0}
-+static struct rt2880_pmx_group rt5350_pinmux_data[] = {
-+ GRP("i2c", i2c_func, 1, RT305X_GPIO_MODE_I2C),
-+ GRP("spi", spi_func, 1, RT305X_GPIO_MODE_SPI),
-+ GRP("uartf", uartf_func, RT305X_GPIO_MODE_UART0_MASK,
-+ RT305X_GPIO_MODE_UART0_SHIFT),
-+ GRP("uartlite", uartlite_func, 1, RT305X_GPIO_MODE_UART1),
-+ GRP("jtag", jtag_func, 1, RT305X_GPIO_MODE_JTAG),
-+ GRP("led", rt5350_led_func, 1, RT5350_GPIO_MODE_PHY_LED),
-+ { 0 }
- };
-
- static void rt305x_wdt_reset(void)
-@@ -114,14 +95,6 @@ static void rt305x_wdt_reset(void)
- rt_sysc_w32(t, SYSC_REG_SYSTEM_CONFIG);
- }
-
--struct ralink_pinmux rt_gpio_pinmux = {
-- .mode = mode_mux,
-- .uart = uart_mux,
-- .uart_shift = RT305X_GPIO_MODE_UART0_SHIFT,
-- .uart_mask = RT305X_GPIO_MODE_UART0_MASK,
-- .wdt_reset = rt305x_wdt_reset,
--};
--
- static unsigned long rt5350_get_mem_size(void)
- {
- void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE);
-@@ -291,11 +264,14 @@ void prom_soc_init(struct ralink_soc_inf
- soc_info->mem_base = RT305X_SDRAM_BASE;
- if (soc_is_rt5350()) {
- soc_info->mem_size = rt5350_get_mem_size();
-+ rt2880_pinmux_data = rt5350_pinmux_data;
- } else if (soc_is_rt305x() || soc_is_rt3350()) {
- soc_info->mem_size_min = RT305X_MEM_SIZE_MIN;
- soc_info->mem_size_max = RT305X_MEM_SIZE_MAX;
-+ rt2880_pinmux_data = rt3050_pinmux_data;
- } else if (soc_is_rt3352()) {
- soc_info->mem_size_min = RT3352_MEM_SIZE_MIN;
- soc_info->mem_size_max = RT3352_MEM_SIZE_MAX;
-+ rt2880_pinmux_data = rt3352_pinmux_data;
- }
- }
---- a/arch/mips/include/asm/mach-ralink/rt305x.h
-+++ b/arch/mips/include/asm/mach-ralink/rt305x.h
-@@ -125,24 +125,28 @@ static inline int soc_is_rt5350(void)
- #define RT305X_GPIO_GE0_TXD0 40
- #define RT305X_GPIO_GE0_RXCLK 51
-
--#define RT305X_GPIO_MODE_I2C BIT(0)
--#define RT305X_GPIO_MODE_SPI BIT(1)
- #define RT305X_GPIO_MODE_UART0_SHIFT 2
- #define RT305X_GPIO_MODE_UART0_MASK 0x7
- #define RT305X_GPIO_MODE_UART0(x) ((x) << RT305X_GPIO_MODE_UART0_SHIFT)
--#define RT305X_GPIO_MODE_UARTF 0x0
--#define RT305X_GPIO_MODE_PCM_UARTF 0x1
--#define RT305X_GPIO_MODE_PCM_I2S 0x2
--#define RT305X_GPIO_MODE_I2S_UARTF 0x3
--#define RT305X_GPIO_MODE_PCM_GPIO 0x4
--#define RT305X_GPIO_MODE_GPIO_UARTF 0x5
--#define RT305X_GPIO_MODE_GPIO_I2S 0x6
--#define RT305X_GPIO_MODE_GPIO 0x7
--#define RT305X_GPIO_MODE_UART1 BIT(5)
--#define RT305X_GPIO_MODE_JTAG BIT(6)
--#define RT305X_GPIO_MODE_MDIO BIT(7)
--#define RT305X_GPIO_MODE_SDRAM BIT(8)
--#define RT305X_GPIO_MODE_RGMII BIT(9)
-+#define RT305X_GPIO_MODE_UARTF 0
-+#define RT305X_GPIO_MODE_PCM_UARTF 1
-+#define RT305X_GPIO_MODE_PCM_I2S 2
-+#define RT305X_GPIO_MODE_I2S_UARTF 3
-+#define RT305X_GPIO_MODE_PCM_GPIO 4
-+#define RT305X_GPIO_MODE_GPIO_UARTF 5
-+#define RT305X_GPIO_MODE_GPIO_I2S 6
-+#define RT305X_GPIO_MODE_GPIO 7
-+
-+#define RT305X_GPIO_MODE_I2C 0
-+#define RT305X_GPIO_MODE_SPI 1
-+#define RT305X_GPIO_MODE_UART1 5
-+#define RT305X_GPIO_MODE_JTAG 6
-+#define RT305X_GPIO_MODE_MDIO 7
-+#define RT305X_GPIO_MODE_SDRAM 8
-+#define RT305X_GPIO_MODE_RGMII 9
-+#define RT5350_GPIO_MODE_PHY_LED 14
-+#define RT3352_GPIO_MODE_LNA 18
-+#define RT3352_GPIO_MODE_PA 20
-
- #define RT3352_SYSC_REG_SYSCFG0 0x010
- #define RT3352_SYSC_REG_SYSCFG1 0x014
---- a/arch/mips/include/asm/mach-ralink/mt7620.h
-+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
-@@ -59,7 +59,6 @@
- #define MT7620_DDR2_SIZE_MIN 32
- #define MT7620_DDR2_SIZE_MAX 256
-
--#define MT7620_GPIO_MODE_I2C BIT(0)
- #define MT7620_GPIO_MODE_UART0_SHIFT 2
- #define MT7620_GPIO_MODE_UART0_MASK 0x7
- #define MT7620_GPIO_MODE_UART0(x) ((x) << MT7620_GPIO_MODE_UART0_SHIFT)
-@@ -71,15 +70,35 @@
- #define MT7620_GPIO_MODE_GPIO_UARTF 0x5
- #define MT7620_GPIO_MODE_GPIO_I2S 0x6
- #define MT7620_GPIO_MODE_GPIO 0x7
--#define MT7620_GPIO_MODE_UART1 BIT(5)
--#define MT7620_GPIO_MODE_MDIO BIT(8)
--#define MT7620_GPIO_MODE_RGMII1 BIT(9)
--#define MT7620_GPIO_MODE_RGMII2 BIT(10)
--#define MT7620_GPIO_MODE_SPI BIT(11)
--#define MT7620_GPIO_MODE_SPI_REF_CLK BIT(12)
--#define MT7620_GPIO_MODE_WLED BIT(13)
--#define MT7620_GPIO_MODE_JTAG BIT(15)
--#define MT7620_GPIO_MODE_EPHY BIT(15)
--#define MT7620_GPIO_MODE_WDT BIT(22)
-+
-+#define MT7620_GPIO_MODE_NAND 0
-+#define MT7620_GPIO_MODE_SD 1
-+#define MT7620_GPIO_MODE_ND_SD_GPIO 2
-+#define MT7620_GPIO_MODE_ND_SD_MASK 0x3
-+#define MT7620_GPIO_MODE_ND_SD_SHIFT 18
-+
-+#define MT7620_GPIO_MODE_PCIE_RST 0
-+#define MT7620_GPIO_MODE_PCIE_REF 1
-+#define MT7620_GPIO_MODE_PCIE_GPIO 2
-+#define MT7620_GPIO_MODE_PCIE_MASK 0x3
-+#define MT7620_GPIO_MODE_PCIE_SHIFT 16
-+
-+#define MT7620_GPIO_MODE_WDT_RST 0
-+#define MT7620_GPIO_MODE_WDT_REF 1
-+#define MT7620_GPIO_MODE_WDT_GPIO 2
-+#define MT7620_GPIO_MODE_WDT_MASK 0x3
-+#define MT7620_GPIO_MODE_WDT_SHIFT 21
-+
-+#define MT7620_GPIO_MODE_I2C 0
-+#define MT7620_GPIO_MODE_UART1 5
-+#define MT7620_GPIO_MODE_MDIO 8
-+#define MT7620_GPIO_MODE_RGMII1 9
-+#define MT7620_GPIO_MODE_RGMII2 10
-+#define MT7620_GPIO_MODE_SPI 11
-+#define MT7620_GPIO_MODE_SPI_REF_CLK 12
-+#define MT7620_GPIO_MODE_WLED 13
-+#define MT7620_GPIO_MODE_JTAG 15
-+#define MT7620_GPIO_MODE_EPHY 15
-+#define MT7620_GPIO_MODE_PA 20
-
- #endif
---- a/arch/mips/include/asm/mach-ralink/rt3883.h
-+++ b/arch/mips/include/asm/mach-ralink/rt3883.h
-@@ -112,8 +112,6 @@
- #define RT3883_CLKCFG1_PCI_CLK_EN BIT(19)
- #define RT3883_CLKCFG1_UPHY0_CLK_EN BIT(18)
-
--#define RT3883_GPIO_MODE_I2C BIT(0)
--#define RT3883_GPIO_MODE_SPI BIT(1)
- #define RT3883_GPIO_MODE_UART0_SHIFT 2
- #define RT3883_GPIO_MODE_UART0_MASK 0x7
- #define RT3883_GPIO_MODE_UART0(x) ((x) << RT3883_GPIO_MODE_UART0_SHIFT)
-@@ -125,11 +123,15 @@
- #define RT3883_GPIO_MODE_GPIO_UARTF 0x5
- #define RT3883_GPIO_MODE_GPIO_I2S 0x6
- #define RT3883_GPIO_MODE_GPIO 0x7
--#define RT3883_GPIO_MODE_UART1 BIT(5)
--#define RT3883_GPIO_MODE_JTAG BIT(6)
--#define RT3883_GPIO_MODE_MDIO BIT(7)
--#define RT3883_GPIO_MODE_GE1 BIT(9)
--#define RT3883_GPIO_MODE_GE2 BIT(10)
-+
-+#define RT3883_GPIO_MODE_I2C 0
-+#define RT3883_GPIO_MODE_SPI 1
-+#define RT3883_GPIO_MODE_UART1 5
-+#define RT3883_GPIO_MODE_JTAG 6
-+#define RT3883_GPIO_MODE_MDIO 7
-+#define RT3883_GPIO_MODE_GE1 9
-+#define RT3883_GPIO_MODE_GE2 10
-+
- #define RT3883_GPIO_MODE_PCI_SHIFT 11
- #define RT3883_GPIO_MODE_PCI_MASK 0x7
- #define RT3883_GPIO_MODE_PCI (RT3883_GPIO_MODE_PCI_MASK << RT3883_GPIO_MODE_PCI_SHIFT)
---- a/arch/mips/ralink/common.h
-+++ b/arch/mips/ralink/common.h
-@@ -11,25 +11,6 @@
-
- #define RAMIPS_SYS_TYPE_LEN 32
-
--struct ralink_pinmux_grp {
-- const char *name;
-- u32 mask;
-- int gpio_first;
-- int gpio_last;
--};
--
--struct ralink_pinmux {
-- struct ralink_pinmux_grp *mode;
-- struct ralink_pinmux_grp *uart;
-- int uart_shift;
-- u32 uart_mask;
-- void (*wdt_reset)(void);
-- struct ralink_pinmux_grp *pci;
-- int pci_shift;
-- u32 pci_mask;
--};
--extern struct ralink_pinmux rt_gpio_pinmux;
--
- struct ralink_soc_info {
- unsigned char sys_type[RAMIPS_SYS_TYPE_LEN];
- unsigned char *compatible;
---- a/arch/mips/ralink/rt3883.c
-+++ b/arch/mips/ralink/rt3883.c
-@@ -17,132 +17,50 @@
- #include <asm/mipsregs.h>
- #include <asm/mach-ralink/ralink_regs.h>
- #include <asm/mach-ralink/rt3883.h>
-+#include <asm/mach-ralink/pinmux.h>
-
- #include "common.h"
-
--static struct ralink_pinmux_grp mode_mux[] = {
-- {
-- .name = "i2c",
-- .mask = RT3883_GPIO_MODE_I2C,
-- .gpio_first = RT3883_GPIO_I2C_SD,
-- .gpio_last = RT3883_GPIO_I2C_SCLK,
-- }, {
-- .name = "spi",
-- .mask = RT3883_GPIO_MODE_SPI,
-- .gpio_first = RT3883_GPIO_SPI_CS0,
-- .gpio_last = RT3883_GPIO_SPI_MISO,
-- }, {
-- .name = "uartlite",
-- .mask = RT3883_GPIO_MODE_UART1,
-- .gpio_first = RT3883_GPIO_UART1_TXD,
-- .gpio_last = RT3883_GPIO_UART1_RXD,
-- }, {
-- .name = "jtag",
-- .mask = RT3883_GPIO_MODE_JTAG,
-- .gpio_first = RT3883_GPIO_JTAG_TDO,
-- .gpio_last = RT3883_GPIO_JTAG_TCLK,
-- }, {
-- .name = "mdio",
-- .mask = RT3883_GPIO_MODE_MDIO,
-- .gpio_first = RT3883_GPIO_MDIO_MDC,
-- .gpio_last = RT3883_GPIO_MDIO_MDIO,
-- }, {
-- .name = "ge1",
-- .mask = RT3883_GPIO_MODE_GE1,
-- .gpio_first = RT3883_GPIO_GE1_TXD0,
-- .gpio_last = RT3883_GPIO_GE1_RXCLK,
-- }, {
-- .name = "ge2",
-- .mask = RT3883_GPIO_MODE_GE2,
-- .gpio_first = RT3883_GPIO_GE2_TXD0,
-- .gpio_last = RT3883_GPIO_GE2_RXCLK,
-- }, {
-- .name = "pci",
-- .mask = RT3883_GPIO_MODE_PCI,
-- .gpio_first = RT3883_GPIO_PCI_AD0,
-- .gpio_last = RT3883_GPIO_PCI_AD31,
-- }, {
-- .name = "lna a",
-- .mask = RT3883_GPIO_MODE_LNA_A,
-- .gpio_first = RT3883_GPIO_LNA_PE_A0,
-- .gpio_last = RT3883_GPIO_LNA_PE_A2,
-- }, {
-- .name = "lna g",
-- .mask = RT3883_GPIO_MODE_LNA_G,
-- .gpio_first = RT3883_GPIO_LNA_PE_G0,
-- .gpio_last = RT3883_GPIO_LNA_PE_G2,
-- }, {0}
-+static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
-+static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
-+static struct rt2880_pmx_func uartf_func[] = {
-+ FUNC("uartf", RT3883_GPIO_MODE_UARTF, 7, 8),
-+ FUNC("pcm uartf", RT3883_GPIO_MODE_PCM_UARTF, 7, 8),
-+ FUNC("pcm i2s", RT3883_GPIO_MODE_PCM_I2S, 7, 8),
-+ FUNC("i2s uartf", RT3883_GPIO_MODE_I2S_UARTF, 7, 8),
-+ FUNC("pcm gpio", RT3883_GPIO_MODE_PCM_GPIO, 11, 4),
-+ FUNC("gpio uartf", RT3883_GPIO_MODE_GPIO_UARTF, 7, 4),
-+ FUNC("gpio i2s", RT3883_GPIO_MODE_GPIO_I2S, 7, 4),
- };
--
--static struct ralink_pinmux_grp uart_mux[] = {
-- {
-- .name = "uartf",
-- .mask = RT3883_GPIO_MODE_UARTF,
-- .gpio_first = RT3883_GPIO_7,
-- .gpio_last = RT3883_GPIO_14,
-- }, {
-- .name = "pcm uartf",
-- .mask = RT3883_GPIO_MODE_PCM_UARTF,
-- .gpio_first = RT3883_GPIO_7,
-- .gpio_last = RT3883_GPIO_14,
-- }, {
-- .name = "pcm i2s",
-- .mask = RT3883_GPIO_MODE_PCM_I2S,
-- .gpio_first = RT3883_GPIO_7,
-- .gpio_last = RT3883_GPIO_14,
-- }, {
-- .name = "i2s uartf",
-- .mask = RT3883_GPIO_MODE_I2S_UARTF,
-- .gpio_first = RT3883_GPIO_7,
-- .gpio_last = RT3883_GPIO_14,
-- }, {
-- .name = "pcm gpio",
-- .mask = RT3883_GPIO_MODE_PCM_GPIO,
-- .gpio_first = RT3883_GPIO_11,
-- .gpio_last = RT3883_GPIO_14,
-- }, {
-- .name = "gpio uartf",
-- .mask = RT3883_GPIO_MODE_GPIO_UARTF,
-- .gpio_first = RT3883_GPIO_7,
-- .gpio_last = RT3883_GPIO_10,
-- }, {
-- .name = "gpio i2s",
-- .mask = RT3883_GPIO_MODE_GPIO_I2S,
-- .gpio_first = RT3883_GPIO_7,
-- .gpio_last = RT3883_GPIO_10,
-- }, {
-- .name = "gpio",
-- .mask = RT3883_GPIO_MODE_GPIO,
-- }, {0}
-+static struct rt2880_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 15, 2) };
-+static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
-+static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
-+static struct rt2880_pmx_func lna_a_func[] = { FUNC("lna a", 0, 32, 3) };
-+static struct rt2880_pmx_func lna_g_func[] = { FUNC("lna a", 0, 35, 3) };
-+static struct rt2880_pmx_func pci_func[] = {
-+ FUNC("pci-dev", 0, 40, 32),
-+ FUNC("pci-host2", 1, 40, 32),
-+ FUNC("pci-host1", 2, 40, 32),
-+ FUNC("pci-fnc", 3, 40, 32)
- };
-+static struct rt2880_pmx_func ge1_func[] = { FUNC("ge1", 0, 72, 12) };
-+static struct rt2880_pmx_func ge2_func[] = { FUNC("ge1", 0, 84, 12) };
-
--static struct ralink_pinmux_grp pci_mux[] = {
-- {
-- .name = "pci-dev",
-- .mask = 0,
-- .gpio_first = RT3883_GPIO_PCI_AD0,
-- .gpio_last = RT3883_GPIO_PCI_AD31,
-- }, {
-- .name = "pci-host2",
-- .mask = 1,
-- .gpio_first = RT3883_GPIO_PCI_AD0,
-- .gpio_last = RT3883_GPIO_PCI_AD31,
-- }, {
-- .name = "pci-host1",
-- .mask = 2,
-- .gpio_first = RT3883_GPIO_PCI_AD0,
-- .gpio_last = RT3883_GPIO_PCI_AD31,
-- }, {
-- .name = "pci-fnc",
-- .mask = 3,
-- .gpio_first = RT3883_GPIO_PCI_AD0,
-- .gpio_last = RT3883_GPIO_PCI_AD31,
-- }, {
-- .name = "pci-gpio",
-- .mask = 7,
-- .gpio_first = RT3883_GPIO_PCI_AD0,
-- .gpio_last = RT3883_GPIO_PCI_AD31,
-- }, {0}
-+static struct rt2880_pmx_group rt3883_pinmux_data[] = {
-+ GRP("i2c", i2c_func, 1, RT3883_GPIO_MODE_I2C),
-+ GRP("spi", spi_func, 1, RT3883_GPIO_MODE_SPI),
-+ GRP("uartf", uartf_func, RT3883_GPIO_MODE_UART0_MASK,
-+ RT3883_GPIO_MODE_UART0_SHIFT),
-+ GRP("uartlite", uartlite_func, 1, RT3883_GPIO_MODE_UART1),
-+ GRP("jtag", jtag_func, 1, RT3883_GPIO_MODE_JTAG),
-+ GRP("mdio", mdio_func, 1, RT3883_GPIO_MODE_MDIO),
-+ GRP("lna a", lna_a_func, 1, RT3883_GPIO_MODE_LNA_A),
-+ GRP("lna g", lna_g_func, 1, RT3883_GPIO_MODE_LNA_G),
-+ GRP("pci", pci_func, RT3883_GPIO_MODE_PCI_MASK,
-+ RT3883_GPIO_MODE_PCI_SHIFT),
-+ GRP("ge1", ge1_func, 1, RT3883_GPIO_MODE_GE1),
-+ GRP("ge2", ge2_func, 1, RT3883_GPIO_MODE_GE2),
-+ { 0 }
- };
-
- static void rt3883_wdt_reset(void)
-@@ -155,17 +73,6 @@ static void rt3883_wdt_reset(void)
- rt_sysc_w32(t, RT3883_SYSC_REG_SYSCFG1);
- }
-
--struct ralink_pinmux rt_gpio_pinmux = {
-- .mode = mode_mux,
-- .uart = uart_mux,
-- .uart_shift = RT3883_GPIO_MODE_UART0_SHIFT,
-- .uart_mask = RT3883_GPIO_MODE_UART0_MASK,
-- .wdt_reset = rt3883_wdt_reset,
-- .pci = pci_mux,
-- .pci_shift = RT3883_GPIO_MODE_PCI_SHIFT,
-- .pci_mask = RT3883_GPIO_MODE_PCI_MASK,
--};
--
- void __init ralink_clk_init(void)
- {
- unsigned long cpu_rate, sys_rate;
-@@ -243,4 +150,6 @@ void prom_soc_init(struct ralink_soc_inf
- soc_info->mem_base = RT3883_SDRAM_BASE;
- soc_info->mem_size_min = RT3883_MEM_SIZE_MIN;
- soc_info->mem_size_max = RT3883_MEM_SIZE_MAX;
-+
-+ rt2880_pinmux_data = rt3883_pinmux_data;
- }
projects / openwrt / svn-archive / archive.git / blobdiff