+++ /dev/null
-/*
- * Copyright (c) 2004-2005 Atheros Communications Inc.
- * All rights reserved.
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation;
- *
- * Software distributed under the License is distributed on an "AS
- * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- * implied. See the License for the specific language governing
- * rights and limitations under the License.
- *
- *
- *
- *
- * $Id: //depot/sw/releases/olca2.0-GPL/host/os/linux/include/ieee80211_ioctl.h#1 $
- */
-
-#ifndef _IEEE80211_IOCTL_H_
-#define _IEEE80211_IOCTL_H_
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/*
- * Extracted from the MADWIFI net80211/ieee80211_ioctl.h
- */
-
-/*
- * WPA/RSN get/set key request. Specify the key/cipher
- * type and whether the key is to be used for sending and/or
- * receiving. The key index should be set only when working
- * with global keys (use IEEE80211_KEYIX_NONE for ``no index'').
- * Otherwise a unicast/pairwise key is specified by the bssid
- * (on a station) or mac address (on an ap). They key length
- * must include any MIC key data; otherwise it should be no
- more than IEEE80211_KEYBUF_SIZE.
- */
-struct ieee80211req_key {
- u_int8_t ik_type; /* key/cipher type */
- u_int8_t ik_pad;
- u_int16_t ik_keyix; /* key index */
- u_int8_t ik_keylen; /* key length in bytes */
- u_int8_t ik_flags;
-#define IEEE80211_KEY_XMIT 0x01
-#define IEEE80211_KEY_RECV 0x02
-#define IEEE80211_KEY_DEFAULT 0x80 /* default xmit key */
- u_int8_t ik_macaddr[IEEE80211_ADDR_LEN];
- u_int64_t ik_keyrsc; /* key receive sequence counter */
- u_int64_t ik_keytsc; /* key transmit sequence counter */
- u_int8_t ik_keydata[IEEE80211_KEYBUF_SIZE+IEEE80211_MICBUF_SIZE];
-};
-/*
- * Delete a key either by index or address. Set the index
- * to IEEE80211_KEYIX_NONE when deleting a unicast key.
- */
-struct ieee80211req_del_key {
- u_int8_t idk_keyix; /* key index */
- u_int8_t idk_macaddr[IEEE80211_ADDR_LEN];
-};
-/*
- * MLME state manipulation request. IEEE80211_MLME_ASSOC
- * only makes sense when operating as a station. The other
- * requests can be used when operating as a station or an
- * ap (to effect a station).
- */
-struct ieee80211req_mlme {
- u_int8_t im_op; /* operation to perform */
-#define IEEE80211_MLME_ASSOC 1 /* associate station */
-#define IEEE80211_MLME_DISASSOC 2 /* disassociate station */
-#define IEEE80211_MLME_DEAUTH 3 /* deauthenticate station */
-#define IEEE80211_MLME_AUTHORIZE 4 /* authorize station */
-#define IEEE80211_MLME_UNAUTHORIZE 5 /* unauthorize station */
- u_int16_t im_reason; /* 802.11 reason code */
- u_int8_t im_macaddr[IEEE80211_ADDR_LEN];
-};
-
-struct ieee80211req_addpmkid {
- u_int8_t pi_bssid[IEEE80211_ADDR_LEN];
- u_int8_t pi_enable;
- u_int8_t pi_pmkid[16];
-};
-
-#define AUTH_ALG_OPEN_SYSTEM 0x01
-#define AUTH_ALG_SHARED_KEY 0x02
-#define AUTH_ALG_LEAP 0x04
-
-struct ieee80211req_authalg {
- u_int8_t auth_alg;
-};
-
-/*
- * Request to add an IE to a Management Frame
- */
-enum{
- IEEE80211_APPIE_FRAME_BEACON = 0,
- IEEE80211_APPIE_FRAME_PROBE_REQ = 1,
- IEEE80211_APPIE_FRAME_PROBE_RESP = 2,
- IEEE80211_APPIE_FRAME_ASSOC_REQ = 3,
- IEEE80211_APPIE_FRAME_ASSOC_RESP = 4,
- IEEE80211_APPIE_NUM_OF_FRAME = 5
-};
-
-/*
- * The Maximum length of the IE that can be added to a Management frame
- */
-#define IEEE80211_APPIE_FRAME_MAX_LEN 78
-
-struct ieee80211req_getset_appiebuf {
- u_int32_t app_frmtype; /* management frame type for which buffer is added */
- u_int32_t app_buflen; /*application supplied buffer length */
- u_int8_t app_buf[];
-};
-
-/*
- * The following definitions are used by an application to set filter
- * for receiving management frames
- */
-enum {
- IEEE80211_FILTER_TYPE_BEACON = 0x1,
- IEEE80211_FILTER_TYPE_PROBE_REQ = 0x2,
- IEEE80211_FILTER_TYPE_PROBE_RESP = 0x4,
- IEEE80211_FILTER_TYPE_ASSOC_REQ = 0x8,
- IEEE80211_FILTER_TYPE_ASSOC_RESP = 0x10,
- IEEE80211_FILTER_TYPE_AUTH = 0x20,
- IEEE80211_FILTER_TYPE_DEAUTH = 0x40,
- IEEE80211_FILTER_TYPE_DISASSOC = 0x80,
- IEEE80211_FILTER_TYPE_ALL = 0xFF /* used to check the valid filter bits */
-};
-
-struct ieee80211req_set_filter {
- u_int32_t app_filterype; /* management frame filter type */
-};
-
-enum {
- IEEE80211_PARAM_AUTHMODE = 3, /* Authentication Mode */
- IEEE80211_PARAM_MCASTCIPHER = 5,
- IEEE80211_PARAM_MCASTKEYLEN = 6, /* multicast key length */
- IEEE80211_PARAM_UCASTCIPHER = 8,
- IEEE80211_PARAM_UCASTKEYLEN = 9, /* unicast key length */
- IEEE80211_PARAM_WPA = 10, /* WPA mode (0,1,2) */
- IEEE80211_PARAM_ROAMING = 12, /* roaming mode */
- IEEE80211_PARAM_PRIVACY = 13, /* privacy invoked */
- IEEE80211_PARAM_COUNTERMEASURES = 14, /* WPA/TKIP countermeasures */
- IEEE80211_PARAM_DROPUNENCRYPTED = 15, /* discard unencrypted frames */
-};
-
-/*
- * Values for IEEE80211_PARAM_WPA
- */
-#define WPA_MODE_WPA1 1
-#define WPA_MODE_WPA2 2
-#define WPA_MODE_AUTO 3
-#define WPA_MODE_NONE 4
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _IEEE80211_IOCTL_H_ */
projects / openwrt / svn-archive / archive.git / blobdiff