X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fsvn-archive%2Farchive.git;a=blobdiff_plain;f=openwrt%2Fdocs%2Fhardware%2Fasus%2Fwl-500g%2Fdmesg-2_4_29.txt;fp=openwrt%2Fdocs%2Fhardware%2Fasus%2Fwl-500g%2Fdmesg-2_4_29.txt;h=0000000000000000000000000000000000000000;hp=20e1c95e1b150e8b183158651d80c338e33bad13;hb=42a8cadf400911eacb4a981c3496e565267a35fe;hpb=244b1f9d20092144ee161adee420252b1deaee82 diff --git a/openwrt/docs/hardware/asus/wl-500g/dmesg-2_4_29.txt b/openwrt/docs/hardware/asus/wl-500g/dmesg-2_4_29.txt deleted file mode 100644 index 20e1c95e1b..0000000000 --- a/openwrt/docs/hardware/asus/wl-500g/dmesg-2_4_29.txt +++ /dev/null @@ -1,95 +0,0 @@ -CPU revision is: 00024000 -Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes. -Primary data cache 4kB, 2-way, linesize 16 bytes. -Linux version 2.4.29 (wbx@auriga) (gcc version 3.3.5) #1 Thu Feb 17 23:51:07 CET 2005 -Determined physical RAM map: -memory: 01000000 @ 00000000 (usable) -On node 0 totalpages: 4096 -zone(0): 4096 pages. -zone(1): 0 pages. -zone(2): 0 pages. -Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs init=/etc/preinit noinitrd console=ttyS0,115200 -CPU: BCM4710 rev 0 at 125 MHz -Using 62.400 MHz high precision timer. -!unable to setup serial console! -Calibrating delay loop... 82.94 BogoMIPS -Memory: 14044k/16384k available (1474k kernel code, 2340k reserved, 100k data, 100k init, 0k highmem) -Dentry cache hash table entries: 2048 (order: 2, 16384 bytes) -Inode cache hash table entries: 1024 (order: 1, 8192 bytes) -Mount cache hash table entries: 512 (order: 0, 4096 bytes) -Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) -Page-cache hash table entries: 4096 (order: 2, 16384 bytes) -Checking for 'wait' instruction... unavailable. -POSIX conformance testing by UNIFIX -PCI: Fixing up bus 0 -PCI: Fixing up bridge -PCI: Setting latency timer of device 01:00.0 to 64 -PCI: Fixing up bus 1 -Linux NET4.0 for Linux 2.4 -Based upon Swansea University Computer Society NET3.039 -Initializing RT netlink socket -Starting kswapd -devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) -devfs: boot_options: 0x1 -JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. -Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher -pty: 256 Unix98 ptys configured -Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled -Software Watchdog Timer: 0.05, timer margin: 60 sec -loop: loaded (max 8 devices) -PPP generic driver version 2.4.2 -Amd/Fujitsu Extended Query Table v1.0 at 0x0040 -Physically mapped flash: JEDEC Device ID is 0xCA. Assuming broken CFI table. -Physically mapped flash: Swapping erase regions for broken CFI table. -number of CFI chips: 1 -cfi_cmdset_0002: Disabling fast programming due to code brokenness. -Flash device: 0x400000 at 0x1fc00000 -Physically mapped flash: squashfs filesystem found at block 946 -Creating 5 MTD partitions on "Physically mapped flash": -0x00000000-0x00040000 : "pmon" -0x00040000-0x003f0000 : "linux" -0x000ec990-0x001ceb48 : "rootfs" -mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only -0x003f0000-0x00400000 : "nvram" -0x001d0000-0x003f0000 : "OpenWrt" -sflash: chipcommon not found -NET4: Linux TCP/IP 1.0 for NET4.0 -IP Protocols: ICMP, UDP, TCP, IGMP -IP: routing cache hash table of 512 buckets, 4Kbytes -TCP: Hash tables configured (established 1024 bind 2048) -ip_conntrack version 2.1 (128 buckets, 1024 max) - 288 bytes per conntrack -ip_tables: (C) 2000-2002 Netfilter core team -NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. -NET4: Ethernet Bridge 008 for NET4.0 -Bridge firewalling registered -802.1Q VLAN Support v1.8 Ben Greear -All bugs added by David S. Miller -VFS: Mounted root (squashfs filesystem) readonly. -Mounted devfs on /dev -Freeing unused kernel memory: 100k freed -Warning: unable to open an initial console. -Algorithmics/MIPS FPU Emulator v1.5 -diag boardtype: 0000041a -using v1 hardware -led -> 00 -led -> 01 -jffs2.bbc: SIZE compression mode activated. -PCI: Setting latency timer of device 00:02.0 to 64 -5325E phy=FFFFFFFF -eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0 -PCI: Setting latency timer of device 00:08.0 to 64 -5325E phy=FFFFFFFF -eth1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0 -PCI: Setting latency timer of device 01:02.0 to 64 -PCI: Enabling device 01:02.0 (0004 -> 0006) -eth2: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0 -device eth0 entered promiscuous mode -device eth2 entered promiscuous mode -eth2: attempt to add interface with same source address. -br0: port 2(eth2) entering learning state -br0: port 1(eth0) entering learning state -br0: port 2(eth2) entering forwarding state -br0: topology change detected, propagating -br0: port 1(eth0) entering forwarding state -br0: topology change detected, propagating -led -> 00