X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fsvn-archive%2Farchive.git;a=blobdiff_plain;f=openwrt%2Fdocs%2Fhardware%2Fsoekris%2Fnet4801%2Fdmesg-2.4.30.txt;fp=openwrt%2Fdocs%2Fhardware%2Fsoekris%2Fnet4801%2Fdmesg-2.4.30.txt;h=0000000000000000000000000000000000000000;hp=afde78631571a98adfaad46e450115e7d9e6950d;hb=42a8cadf400911eacb4a981c3496e565267a35fe;hpb=244b1f9d20092144ee161adee420252b1deaee82 diff --git a/openwrt/docs/hardware/soekris/net4801/dmesg-2.4.30.txt b/openwrt/docs/hardware/soekris/net4801/dmesg-2.4.30.txt deleted file mode 100644 index afde786315..0000000000 --- a/openwrt/docs/hardware/soekris/net4801/dmesg-2.4.30.txt +++ /dev/null @@ -1,104 +0,0 @@ -Linux version 2.4.30 (nthill@debian) (gcc version 3.4.4) #2 Sat Aug 13 01:30:32 CEST 2005 -BIOS-provided physical RAM map: - BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) - BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) - BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) - BIOS-e820: 0000000000100000 - 0000000008000000 (usable) - BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) -128MB LOWMEM available. -On node 0 totalpages: 32768 -zone(0): 4096 pages. -zone(1): 28672 pages. -zone(2): 0 pages. -DMI not present. -Kernel command line: blkmtd_device=/dev/hda2 root=/dev/mtdblock0 init=/etc/preinit noinitrd console=ttyS0,19200n8 -Initializing CPU#0 -Detected 266.650 MHz processor. -Calibrating delay loop... 532.48 BogoMIPS -Memory: 127284k/131072k available (1238k kernel code, 3400k reserved, 248k data, 80k init, 0k highmem) -Checking if this processor honours the WP bit even in supervisor mode... Ok. -Dentry cache hash table entries: 16384 (order: 5, 131072 bytes) -Inode cache hash table entries: 8192 (order: 4, 65536 bytes) -Mount cache hash table entries: 512 (order: 0, 4096 bytes) -Buffer cache hash table entries: 8192 (order: 3, 32768 bytes) -Page-cache hash table entries: 32768 (order: 5, 131072 bytes) -CPU: After generic, caps: 00808131 00818131 00000000 00000001 -CPU: Common caps: 00808131 00818131 00000000 00000001 -CPU: NSC Unknown stepping 01 -Checking 'hlt' instruction... OK. -POSIX conformance testing by UNIFIX -PCI: PCI BIOS revision 2.01 entry at 0xf7861, last bus=0 -PCI: Using configuration type 1 -PCI: Probing PCI hardware -PCI: Probing PCI hardware (bus 00) -Linux NET4.0 for Linux 2.4 -Based upon Swansea University Computer Society NET3.039 -Initializing RT netlink socket -Starting kswapd -devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) -devfs: boot_options: 0x1 -JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. -Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher -pty: 256 Unix98 ptys configured -Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled -ttyS00 at 0x03f8 (irq = 4) is a 16550A -ttyS01 at 0x02f8 (irq = 3) is a 16550A -Software Watchdog Timer: 0.05, timer margin: 60 sec -RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize -Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 -ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx -SC1200: IDE controller at PCI slot 00:12.2 -SC1200: chipset revision 1 -SC1200: not 100% native mode: will probe irqs later - ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:pio, hdb:pio - ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:pio, hdd:pio -hda: Transcend 256M, CFA DISK drive -hdb: HTS424030M9AT00, ATA DISK drive -SC1200: set xfer mode failure -hdb: sc1200_set_xfer_mode(UDMA 2) -blk: queue c02c421c, I/O limit 4095Mb (mask 0xffffffff) -ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 -hda: attached ide-disk driver. -hda: 500736 sectors (256 MB) w/2KiB Cache, CHS=978/16/32 -hdb: attached ide-disk driver. -hdb: host protected area => 1 -hdb: 58605120 sectors (30006 MB) w/1739KiB Cache, CHS=3648/255/63, UDMA(33) -Partition check: - /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 - /dev/ide/host0/bus0/target1/lun0: p1 p2 p3 - /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 -blkmtd: mtd0: [/dev/hda2] erase_size = 128KiB -blkmtd: version 1.10 -Initializing Cryptographic API -NET4: Linux TCP/IP 1.0 for NET4.0 -IP Protocols: ICMP, UDP, TCP, IGMP -IP: routing cache hash table of 1024 buckets, 8Kbytes -TCP: Hash tables configured (established 8192 bind 16384) -ip_conntrack version 2.1 (5953 buckets, 5953 max) - 316 bytes per conntrack -ip_tables: (C) 2000-2002 Netfilter core team -NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. -NET4: Ethernet Bridge 008 for NET4.0 -802.1Q VLAN Support v1.8 Ben Greear -All bugs added by David S. Miller -VFS: Mounted root (jffs2 filesystem) readonly. -Mounted devfs on /dev -Freeing unused kernel memory: 80k freed -jffs2.bbc: SIZE compression mode activated. -natsemi dp8381x driver, version 1.07+LK1.0.17, Sep 27, 2002 - originally by Donald Becker - http://www.scyld.com/network/natsemi.html - 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder -eth0: NatSemi DP8381[56] at 0xc88ab000, 00:00:24:c2:45:7c, IRQ 10. -eth1: NatSemi DP8381[56] at 0xc88ad000, 00:00:24:c2:45:7d, IRQ 10. -eth2: NatSemi DP8381[56] at 0xc88af000, 00:00:24:c2:45:7e, IRQ 10. -device eth0 entered promiscuous mode -eth0: link up. -eth0: Setting full-duplex based on negotiated link capability. -eth0: Promiscuous mode enabled. -eth0: Promiscuous mode enabled. -eth0: Promiscuous mode enabled. -eth0: Promiscuous mode enabled. -eth0: Promiscuous mode enabled. -br0: port 1(eth0) entering learning state -br0: port 1(eth0) entering forwarding state -br0: topology change detected, propagating