X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fsvn-archive%2Farchive.git;a=blobdiff_plain;f=openwrt%2Ftarget%2Flinux%2Flinux-2.4%2Fpatches%2Far531x%2F000-atheros-support.patch;fp=openwrt%2Ftarget%2Flinux%2Flinux-2.4%2Fpatches%2Far531x%2F000-atheros-support.patch;h=de7115b46a158a6768d318e9e130ad621adf744c;hp=1ec012f63082fdf3b58cfdc72559dedebaa11e03;hb=d6e026b6978a30347ee7853374ba64841b886fe3;hpb=b4109b5fa0b355ed4ce626dd7e444661444cbfb2 diff --git a/openwrt/target/linux/linux-2.4/patches/ar531x/000-atheros-support.patch b/openwrt/target/linux/linux-2.4/patches/ar531x/000-atheros-support.patch index 1ec012f630..de7115b46a 100644 --- a/openwrt/target/linux/linux-2.4/patches/ar531x/000-atheros-support.patch +++ b/openwrt/target/linux/linux-2.4/patches/ar531x/000-atheros-support.patch @@ -1,2642 +1,11411 @@ -diff -urN linux-2.4.32/arch/mips/ar531x/ar531xdbg_io.c linux-2.4.32.new/arch/mips/ar531x/ar531xdbg_io.c ---- linux-2.4.32/arch/mips/ar531x/ar531xdbg_io.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32.new/arch/mips/ar531x/ar531xdbg_io.c 2005-12-24 20:29:42.102311328 +0000 -@@ -0,0 +1,217 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright MontaVista Software Inc -+ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved. -+ */ -+ -+/* -+ * Basic support for polled character input/output -+ * using the AR531X's serial port. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "ar531xlnx.h" -+ -+#if CONFIG_EARLY_PRINTK_HACK || CONFIG_KGDB -+/* base addr of uart and clock timing */ -+#define BASE 0xbc000003 -+ -+/* distance in bytes between two serial registers */ -+#define REG_OFFSET 4 -+ -+/* -+ * 0 - we need to do serial init -+ * 1 - skip serial init -+ */ -+static int serialPortInitialized = 0; -+ -+/* -+ * * the default baud rate *if* we do serial init -+ * */ -+#define BAUD_DEFAULT UART16550_BAUD_9600 -+ -+/* === END OF CONFIG === */ -+ -+#define UART16550_BAUD_2400 2400 -+#define UART16550_BAUD_4800 4800 -+#define UART16550_BAUD_9600 9600 -+#define UART16550_BAUD_19200 19200 -+#define UART16550_BAUD_38400 38400 -+#define UART16550_BAUD_57600 57600 -+#define UART16550_BAUD_115200 115200 -+ -+#define UART16550_PARITY_NONE 0 -+#define UART16550_PARITY_ODD 0x08 -+#define UART16550_PARITY_EVEN 0x18 -+#define UART16550_PARITY_MARK 0x28 -+#define UART16550_PARITY_SPACE 0x38 -+ -+#define UART16550_DATA_5BIT 0x0 -+#define UART16550_DATA_6BIT 0x1 -+#define UART16550_DATA_7BIT 0x2 -+#define UART16550_DATA_8BIT 0x3 -+ -+#define UART16550_STOP_1BIT 0x0 -+#define UART16550_STOP_2BIT 0x4 -+ -+/* register offset */ -+#define OFS_RCV_BUFFER (0*REG_OFFSET) -+#define OFS_TRANS_HOLD (0*REG_OFFSET) -+#define OFS_SEND_BUFFER (0*REG_OFFSET) -+#define OFS_INTR_ENABLE (1*REG_OFFSET) -+#define OFS_INTR_ID (2*REG_OFFSET) -+#define OFS_DATA_FORMAT (3*REG_OFFSET) -+#define OFS_LINE_CONTROL (3*REG_OFFSET) -+#define OFS_MODEM_CONTROL (4*REG_OFFSET) -+#define OFS_RS232_OUTPUT (4*REG_OFFSET) -+#define OFS_LINE_STATUS (5*REG_OFFSET) -+#define OFS_MODEM_STATUS (6*REG_OFFSET) -+#define OFS_RS232_INPUT (6*REG_OFFSET) -+#define OFS_SCRATCH_PAD (7*REG_OFFSET) -+ -+#define OFS_DIVISOR_LSB (0*REG_OFFSET) -+#define OFS_DIVISOR_MSB (1*REG_OFFSET) -+ -+ -+/* memory-mapped read/write of the port */ -+#define UART16550_READ(y) (*((volatile u8*)(BASE + y))) -+#define UART16550_WRITE(y, z) ((*((volatile u8*)(BASE + y))) = z) -+ -+void -+debugPortInit(u32 baud, u8 data, u8 parity, u8 stop) -+{ -+ /* Pull UART out of reset */ -+ sysRegWrite(AR531X_RESET, -+ sysRegRead(AR531X_RESET) & ~(AR531X_RESET_UART0)); -+ -+ /* disable interrupts */ -+ UART16550_WRITE(OFS_LINE_CONTROL, 0x0); -+ UART16550_WRITE(OFS_INTR_ENABLE, 0); -+ -+ /* set up buad rate */ -+ { -+ u32 divisor; -+ u32 uart_clock_rate = ar531x_cpu_frequency() / 4; -+ u32 base_baud = uart_clock_rate / 16; -+ -+ /* set DIAB bit */ -+ UART16550_WRITE(OFS_LINE_CONTROL, 0x80); -+ -+ /* set divisor */ -+ divisor = base_baud / baud; -+ UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff); -+ UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00)>>8); -+ -+ /* clear DIAB bit */ -+ UART16550_WRITE(OFS_LINE_CONTROL, 0x0); -+ } -+ -+ /* set data format */ -+ UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop); -+} -+ -+u8 -+getDebugChar(void) -+{ -+ if (!serialPortInitialized) { -+ serialPortInitialized = 1; -+ debugPortInit(BAUD_DEFAULT, -+ UART16550_DATA_8BIT, -+ UART16550_PARITY_NONE, UART16550_STOP_1BIT); -+ } -+ -+ while((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0); -+ return UART16550_READ(OFS_RCV_BUFFER); -+} -+ -+#if CONFIG_KGDB -+/* -+ * Peek at the most recently received character. -+ * Don't wait for a new character to be received. -+ */ -+u8 -+peekDebugChar(void) -+{ -+ return UART16550_READ(OFS_RCV_BUFFER); -+} -+ -+static int kgdbInitialized = 0; -+ -+void -+kgdbInit(void) -+{ -+ sysRegWrite(AR531X_WD_CTRL, AR531X_WD_CTRL_IGNORE_EXPIRATION); -+ -+ if (!kgdbInitialized) { -+ printk("Setting debug traps - please connect the remote debugger.\n"); -+ set_debug_traps(); -+ kgdbInitialized = 1; -+ } -+ breakpoint(); -+} -+ -+int -+kgdbEnabled(void) -+{ -+ return kgdbInitialized; -+} -+ -+#define DEBUG_CHAR '\001'; -+ -+int -+kgdbInterrupt(void) -+{ -+ if (!kgdbInitialized) { -+ return 0; -+ } -+ -+ /* -+ * Try to avoid swallowing too much input: Only consume -+ * a character if nothing new has arrived. Yes, there's -+ * still a small hole here, and we may lose an input -+ * character now and then. -+ */ -+ if (UART16550_READ(OFS_LINE_STATUS) & 1) { -+ return 0; -+ } else { -+ return UART16550_READ(OFS_RCV_BUFFER) == DEBUG_CHAR; -+ } -+} -+#endif -+ -+ -+void -+putDebugChar(char byte) -+{ -+ if (!serialPortInitialized) { -+ serialPortInitialized = 1; -+ debugPortInit(BAUD_DEFAULT, -+ UART16550_DATA_8BIT, -+ UART16550_PARITY_NONE, UART16550_STOP_1BIT); -+ } -+ -+ while ((UART16550_READ(OFS_LINE_STATUS) &0x20) == 0); -+ UART16550_WRITE(OFS_SEND_BUFFER, byte); -+ } -+#endif /* CONFIG_EARLY_PRINTK_HACK || CONFIG_KGDB */ -diff -urN linux-2.4.32/arch/mips/ar531x/ar531xgpio.c linux-2.4.32.new/arch/mips/ar531x/ar531xgpio.c ---- linux-2.4.32/arch/mips/ar531x/ar531xgpio.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32.new/arch/mips/ar531x/ar531xgpio.c 2005-12-24 20:29:42.102311328 +0000 -@@ -0,0 +1,141 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved. -+ */ -+ -+/* -+ * Support for GPIO -- General Purpose Input/Output Pins -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include "ar531xlnx.h" -+ -+/* GPIO Interrupt Support */ -+ -+/* Turn on the specified AR531X_GPIO_IRQ interrupt */ -+static unsigned int -+ar531x_gpio_intr_startup(unsigned int irq) -+{ -+ ar531x_gpio_intr_enable(irq); -+ return 0; -+} -+ -+/* Turn off the specified AR531X_GPIO_IRQ interrupt */ -+static void -+ar531x_gpio_intr_shutdown(unsigned int irq) -+{ -+ ar531x_gpio_intr_disable(irq); -+} -+ -+u32 gpioIntMask = 0; -+ -+/* Enable the specified AR531X_GPIO_IRQ interrupt */ -+void -+ar531x_gpio_intr_enable(unsigned int irq) -+{ -+ u32 reg; -+ int gpio; -+ -+ gpio = irq - AR531X_GPIO_IRQ_BASE; -+ gpioIntMask |= gpio; -+ -+ reg = sysRegRead(AR531X_GPIO_CR); -+ reg &= ~(GPIO_CR_M(gpio) | GPIO_CR_UART(gpio) | GPIO_CR_INT(gpio)); -+ reg |= GPIO_CR_I(gpio); -+ reg |= GPIO_CR_INT(gpio); -+ -+ sysRegWrite(AR531X_GPIO_CR, reg); -+ (void)sysRegRead(AR531X_GPIO_CR); /* flush to hardware */ -+} -+ -+/* Disable the specified AR531X_GPIO_IRQ interrupt */ -+void -+ar531x_gpio_intr_disable(unsigned int irq) -+{ -+ u32 reg; -+ int gpio; -+ -+ gpio = irq - AR531X_GPIO_IRQ_BASE; -+ -+ reg = sysRegRead(AR531X_GPIO_CR); -+ reg &= ~(GPIO_CR_M(gpio) | GPIO_CR_UART(gpio) | GPIO_CR_INT(gpio)); -+ reg |= GPIO_CR_I(gpio); -+ /* No GPIO_CR_INT bit */ -+ -+ sysRegWrite(AR531X_GPIO_CR, reg); -+ (void)sysRegRead(AR531X_GPIO_CR); /* flush to hardware */ -+ -+ gpioIntMask &= ~gpio; -+} -+ -+static void -+ar531x_gpio_intr_ack(unsigned int irq) -+{ -+ ar531x_gpio_intr_disable(irq); -+} -+ -+static void -+ar531x_gpio_intr_end(unsigned int irq) -+{ -+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) -+ ar531x_gpio_intr_enable(irq); -+} -+ -+static void -+ar531x_gpio_intr_set_affinity(unsigned int irq, unsigned long mask) -+{ -+ /* Only 1 CPU; ignore affinity request */ -+} -+ -+int ar531x_gpio_irq_base; -+ -+struct hw_interrupt_type ar531x_gpio_intr_controller = { -+ "AR531X GPIO", -+ ar531x_gpio_intr_startup, -+ ar531x_gpio_intr_shutdown, -+ ar531x_gpio_intr_enable, -+ ar531x_gpio_intr_disable, -+ ar531x_gpio_intr_ack, -+ ar531x_gpio_intr_end, -+ ar531x_gpio_intr_set_affinity, -+}; -+ -+void -+ar531x_gpio_intr_init(int irq_base) -+{ -+ int i; -+ -+ for (i = irq_base; i < irq_base + AR531X_GPIO_IRQ_COUNT; i++) { -+ irq_desc[i].status = IRQ_DISABLED; -+ irq_desc[i].action = NULL; -+ irq_desc[i].depth = 1; -+ irq_desc[i].handler = &ar531x_gpio_intr_controller; -+ } -+ -+ ar531x_gpio_irq_base = irq_base; -+} -+ -+/* ARGSUSED */ -+void -+spurious_gpio_handler(int cpl, void *dev_id, struct pt_regs *regs) -+{ -+ u32 gpioDataIn; -+ -+ gpioDataIn = sysRegRead(AR531X_GPIO_DI) & gpioIntMask; -+ -+ printk("spurious_gpio_handler: 0x%x di=0x%8.8x gpioIntMask=0x%8.8x\n", -+ cpl, gpioDataIn, gpioIntMask); -+} -+ -+struct irqaction spurious_gpio = -+ {spurious_gpio_handler, SA_INTERRUPT, 0, "spurious_gpio", -+ NULL, NULL}; -+ -diff -urN linux-2.4.32/arch/mips/ar531x/ar531x.h linux-2.4.32.new/arch/mips/ar531x/ar531x.h ---- linux-2.4.32/arch/mips/ar531x/ar531x.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32.new/arch/mips/ar531x/ar531x.h 2005-12-24 20:29:42.102311328 +0000 -@@ -0,0 +1,280 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved. -+ */ -+ -+#ifndef AR531X_H -+#define AR531X_H 1 -+ -+#include -+ -+/* Address Map */ -+#define AR531X_WLAN0 0x18000000 -+#define AR531X_WLAN1 0x18500000 -+#define AR531X_ENET0 0x18100000 -+#define AR531X_ENET1 0x18200000 -+#define AR531X_SDRAMCTL 0x18300000 -+#define AR531X_FLASHCTL 0x18400000 -+#define AR531X_APBBASE 0x1c000000 -+#define AR531X_FLASH 0x1e000000 -+ -+/* -+ * AR531X_NUM_ENET_MAC defines the number of ethernet MACs that -+ * should be considered available. The AR5312 supports 2 enet MACS, -+ * even though many reference boards only actually use 1 of them -+ * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch. -+ * The AR2312 supports 1 enet MAC. -+ */ -+#define AR531X_NUM_ENET_MAC 2 -+ -+/* -+ * Need these defines to determine true number of ethernet MACs -+ */ -+#define AR5212_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */ -+#define AR5212_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ -+#define AR5212_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */ -+#define AR531X_RADIO_MASK_OFF 0xc8 -+#define AR531X_RADIO0_MASK 0x0003 -+#define AR531X_RADIO1_MASK 0x000c -+#define AR531X_RADIO1_S 2 -+ -+/* -+ * AR531X_NUM_WMAC defines the number of Wireless MACs that\ -+ * should be considered available. -+ */ -+#define AR531X_NUM_WMAC 2 -+ -+/* Reset/Timer Block Address Map */ -+#define AR531X_RESETTMR (AR531X_APBBASE + 0x3000) -+#define AR531X_TIMER (AR531X_RESETTMR + 0x0000) /* countdown timer */ -+#define AR531X_WD_CTRL (AR531X_RESETTMR + 0x0008) /* watchdog cntrl */ -+#define AR531X_WD_TIMER (AR531X_RESETTMR + 0x000c) /* watchdog timer */ -+#define AR531X_ISR (AR531X_RESETTMR + 0x0010) /* Intr Status Reg */ -+#define AR531X_IMR (AR531X_RESETTMR + 0x0014) /* Intr Mask Reg */ -+#define AR531X_RESET (AR531X_RESETTMR + 0x0020) -+#define AR5312_CLOCKCTL1 (AR531X_RESETTMR + 0x0064) -+#define AR5312_SCRATCH (AR531X_RESETTMR + 0x006c) -+#define AR531X_PROCADDR (AR531X_RESETTMR + 0x0070) -+#define AR531X_PROC1 (AR531X_RESETTMR + 0x0074) -+#define AR531X_DMAADDR (AR531X_RESETTMR + 0x0078) -+#define AR531X_DMA1 (AR531X_RESETTMR + 0x007c) -+#define AR531X_ENABLE (AR531X_RESETTMR + 0x0080) /* interface enb */ -+#define AR531X_REV (AR531X_RESETTMR + 0x0090) /* revision */ -+ -+/* AR531X_WD_CTRL register bit field definitions */ -+#define AR531X_WD_CTRL_IGNORE_EXPIRATION 0x0000 -+#define AR531X_WD_CTRL_NMI 0x0001 -+#define AR531X_WD_CTRL_RESET 0x0002 -+ -+/* AR531X_ISR register bit field definitions */ -+#define AR531X_ISR_NONE 0x0000 -+#define AR531X_ISR_TIMER 0x0001 -+#define AR531X_ISR_AHBPROC 0x0002 -+#define AR531X_ISR_AHBDMA 0x0004 -+#define AR531X_ISR_GPIO 0x0008 -+#define AR531X_ISR_UART0 0x0010 -+#define AR531X_ISR_UART0DMA 0x0020 -+#define AR531X_ISR_WD 0x0040 -+#define AR531X_ISR_LOCAL 0x0080 -+ -+/* AR531X_RESET register bit field definitions */ -+#define AR531X_RESET_SYSTEM 0x00000001 /* cold reset full system */ -+#define AR531X_RESET_PROC 0x00000002 /* cold reset MIPS core */ -+#define AR531X_RESET_WLAN0 0x00000004 /* cold reset WLAN MAC and BB */ -+#define AR531X_RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */ -+#define AR531X_RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */ -+#define AR531X_RESET_ENET0 0x00000020 /* cold reset ENET0 mac */ -+#define AR531X_RESET_ENET1 0x00000040 /* cold reset ENET1 mac */ -+#define AR531X_RESET_UART0 0x00000100 /* cold reset UART0 (high speed) */ -+#define AR531X_RESET_WLAN1 0x00000200 /* cold reset WLAN MAC/BB */ -+#define AR531X_RESET_APB 0x00000400 /* cold reset APB (ar5312) */ -+#define AR531X_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */ -+#define AR531X_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset WLAN0 MAC */ -+#define AR531X_RESET_WARM_WLAN0_BB 0x00004000 /* warm reset WLAN0 BaseBand */ -+#define AR531X_RESET_NMI 0x00010000 /* send an NMI to the processor */ -+#define AR531X_RESET_WARM_WLAN1_MAC 0x00020000 /* warm reset WLAN1 mac */ -+#define AR531X_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 baseband */ -+#define AR531X_RESET_LOCAL_BUS 0x00080000 /* reset local bus */ -+#define AR531X_RESET_WDOG 0x00100000 /* last reset was a watchdog */ -+ -+#define AR531X_RESET_WMAC0_BITS \ -+ AR531X_RESET_WLAN0 |\ -+ AR531X_RESET_WARM_WLAN0_MAC |\ -+ AR531X_RESET_WARM_WLAN0_BB -+ -+#define AR531X_RESERT_WMAC1_BITS \ -+ AR531X_RESET_WLAN1 |\ -+ AR531X_RESET_WARM_WLAN1_MAC |\ -+ AR531X_RESET_WARM_WLAN1_BB -+ -+/* AR5312_CLOCKCTL1 register bit field definitions */ -+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030 -+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4 -+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00 -+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8 -+#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000 -+ -+/* Valid for AR5312 and AR2312 */ -+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030 -+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4 -+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00 -+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8 -+#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000 -+ -+/* Valid for AR2313 */ -+#define AR2313_CLOCKCTL1_PREDIVIDE_MASK 0x00003000 -+#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT 12 -+#define AR2313_CLOCKCTL1_MULTIPLIER_MASK 0x001f0000 -+#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT 16 -+#define AR2313_CLOCKCTL1_DOUBLER_MASK 0x00000000 -+ -+ -+/* AR531X_ENABLE register bit field definitions */ -+#define AR531X_ENABLE_WLAN0 0x0001 -+#define AR531X_ENABLE_ENET0 0x0002 -+#define AR531X_ENABLE_ENET1 0x0004 -+#define AR531X_ENABLE_UART_AND_WLAN1_PIO 0x0008 /* UART, and WLAN1 PIOs */ -+#define AR531X_ENABLE_WLAN1_DMA 0x0010 /* WLAN1 DMAs */ -+#define AR531X_ENABLE_WLAN1 \ -+ (AR531X_ENABLE_UART_AND_WLAN1_PIO | AR531X_ENABLE_WLAN1_DMA) -+ -+/* AR531X_REV register bit field definitions */ -+#define AR531X_REV_WMAC_MAJ 0xf000 -+#define AR531X_REV_WMAC_MAJ_S 12 -+#define AR531X_REV_WMAC_MIN 0x0f00 -+#define AR531X_REV_WMAC_MIN_S 8 -+#define AR531X_REV_MAJ 0x00f0 -+#define AR531X_REV_MAJ_S 4 -+#define AR531X_REV_MIN 0x000f -+#define AR531X_REV_MIN_S 0 -+#define AR531X_REV_CHIP (REV_MAJ|REV_MIN) -+ -+/* Major revision numbers, bits 7..4 of Revision ID register */ -+#define AR531X_REV_MAJ_AR5312 0x4 -+#define AR531X_REV_MAJ_AR2313 0x5 -+ -+/* Minor revision numbers, bits 3..0 of Revision ID register */ -+#define AR5312_REV_MIN_DUAL 0x0 /* Dual WLAN version */ -+#define AR5312_REV_MIN_SINGLE 0x1 /* Single WLAN version */ -+ -+/* AR531X_FLASHCTL register bit field definitions */ -+#define FLASHCTL_IDCY 0x0000000f /* Idle cycle turn around time */ -+#define FLASHCTL_IDCY_S 0 -+#define FLASHCTL_WST1 0x000003e0 /* Wait state 1 */ -+#define FLASHCTL_WST1_S 5 -+#define FLASHCTL_RBLE 0x00000400 /* Read byte lane enable */ -+#define FLASHCTL_WST2 0x0000f800 /* Wait state 2 */ -+#define FLASHCTL_WST2_S 11 -+#define FLASHCTL_AC 0x00070000 /* Flash address check (added) */ -+#define FLASHCTL_AC_S 16 -+#define FLASHCTL_AC_128K 0x00000000 -+#define FLASHCTL_AC_256K 0x00010000 -+#define FLASHCTL_AC_512K 0x00020000 -+#define FLASHCTL_AC_1M 0x00030000 -+#define FLASHCTL_AC_2M 0x00040000 -+#define FLASHCTL_AC_4M 0x00050000 -+#define FLASHCTL_AC_8M 0x00060000 -+#define FLASHCTL_AC_RES 0x00070000 /* 16MB is not supported */ -+#define FLASHCTL_E 0x00080000 /* Flash bank enable (added) */ -+#define FLASHCTL_BUSERR 0x01000000 /* Bus transfer error status flag */ -+#define FLASHCTL_WPERR 0x02000000 /* Write protect error status flag */ -+#define FLASHCTL_WP 0x04000000 /* Write protect */ -+#define FLASHCTL_BM 0x08000000 /* Burst mode */ -+#define FLASHCTL_MW 0x30000000 /* Memory width */ -+#define FLASHCTL_MWx8 0x00000000 /* Memory width x8 */ -+#define FLASHCTL_MWx16 0x10000000 /* Memory width x16 */ -+#define FLASHCTL_MWx32 0x20000000 /* Memory width x32 (not supported) */ -+#define FLASHCTL_ATNR 0x00000000 /* Access type == no retry */ -+#define FLASHCTL_ATR 0x80000000 /* Access type == retry every */ -+#define FLASHCTL_ATR4 0xc0000000 /* Access type == retry every 4 */ -+ -+/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices. */ -+#define AR531X_FLASHCTL0 (AR531X_FLASHCTL + 0x00) -+#define AR531X_FLASHCTL1 (AR531X_FLASHCTL + 0x04) -+#define AR531X_FLASHCTL2 (AR531X_FLASHCTL + 0x08) -+ -+/* ARM SDRAM Controller -- just enough to determine memory size */ -+#define AR531X_MEM_CFG1 (AR531X_SDRAMCTL + 0x04) -+#define MEM_CFG1_AC0 0x00000700 /* bank 0: SDRAM addr check (added) */ -+#define MEM_CFG1_AC0_S 8 -+#define MEM_CFG1_AC1 0x00007000 /* bank 1: SDRAM addr check (added) */ -+#define MEM_CFG1_AC1_S 12 -+ -+/* GPIO Address Map */ -+#define AR531X_GPIO (AR531X_APBBASE + 0x2000) -+#define AR531X_GPIO_DO (AR531X_GPIO + 0x00) /* output register */ -+#define AR531X_GPIO_DI (AR531X_GPIO + 0x04) /* intput register */ -+#define AR531X_GPIO_CR (AR531X_GPIO + 0x08) /* control register */ -+ -+/* GPIO Control Register bit field definitions */ -+#define GPIO_CR_M(x) (1 << (x)) /* mask for i/o */ -+#define GPIO_CR_O(x) (0 << (x)) /* mask for output */ -+#define GPIO_CR_I(x) (1 << (x)) /* mask for input */ -+#define GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt */ -+#define GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */ -+ -+ -+typedef unsigned int AR531X_REG; -+ -+#define sysRegRead(phys) \ -+ (*(volatile AR531X_REG *)PHYS_TO_K1(phys)) -+ -+#define sysRegWrite(phys, val) \ -+ ((*(volatile AR531X_REG *)PHYS_TO_K1(phys)) = (val)) -+ -+ -+/* -+ * This is board-specific data that is stored in a "fixed" location in flash. -+ * It is shared across operating systems, so it should not be changed lightly. -+ * The main reason we need it is in order to extract the ethernet MAC -+ * address(es). -+ */ -+struct ar531x_boarddata { -+ u32 magic; /* board data is valid */ -+#define AR531X_BD_MAGIC 0x35333131 /* "5311", for all 531x platforms */ -+ u16 cksum; /* checksum (starting with BD_REV 2) */ -+ u16 rev; /* revision of this struct */ -+#define BD_REV 4 -+ char boardName[64]; /* Name of board */ -+ u16 major; /* Board major number */ -+ u16 minor; /* Board minor number */ -+ u32 config; /* Board configuration */ -+#define BD_ENET0 0x00000001 /* ENET0 is stuffed */ -+#define BD_ENET1 0x00000002 /* ENET1 is stuffed */ -+#define BD_UART1 0x00000004 /* UART1 is stuffed */ -+#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */ -+#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */ -+#define BD_SYSLED 0x00000020 /* System LED stuffed */ -+#define BD_EXTUARTCLK 0x00000040 /* External UART clock */ -+#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */ -+#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */ -+#define BD_WLAN0 0x00000200 /* Enable WLAN0 */ -+#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ memCap for testing */ -+#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */ -+#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */ -+#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */ -+#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */ -+#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */ -+#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */ -+#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */ -+ u16 resetConfigGpio; /* Reset factory GPIO pin */ -+ u16 sysLedGpio; /* System LED GPIO pin */ -+ -+ u32 cpuFreq; /* CPU core frequency in Hz */ -+ u32 sysFreq; /* System frequency in Hz */ -+ u32 cntFreq; /* Calculated C0_COUNT frequency */ -+ -+ u8 wlan0Mac[6]; -+ u8 enet0Mac[6]; -+ u8 enet1Mac[6]; -+ -+ u16 pciId; /* Pseudo PCIID for common code */ -+ u16 memCap; /* cap bank1 in MB */ -+ -+ /* version 3 */ -+ u8 wlan1Mac[6]; /* (ar5212) */ -+}; -+#endif /* AR531X_H */ -diff -urN linux-2.4.32/arch/mips/ar531x/ar531xintr.S linux-2.4.32.new/arch/mips/ar531x/ar531xintr.S ---- linux-2.4.32/arch/mips/ar531x/ar531xintr.S 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32.new/arch/mips/ar531x/ar531xintr.S 2005-12-24 20:29:42.103311176 +0000 -@@ -0,0 +1,30 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved. -+ */ -+ -+#include -+#include -+#include -+#include -+ -+/* -+ * Glue code to save registers and get us to the interrupt dispatcher -+ */ -+ .text -+ .set noat -+ .align 5 -+NESTED(ar531x_interrupt_receive, PT_SIZE, sp) -+ SAVE_ALL -+ CLI -+ .set at -+ -+ move a0, sp -+ jal ar531x_irq_dispatch -+ -+ j ret_from_irq -+ -+ END(ar531x_interrupt_receive) -diff -urN linux-2.4.32/arch/mips/ar531x/ar531xirq.c linux-2.4.32.new/arch/mips/ar531x/ar531xirq.c ---- linux-2.4.32/arch/mips/ar531x/ar531xirq.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32.new/arch/mips/ar531x/ar531xirq.c 2005-12-24 20:29:42.132306768 +0000 -@@ -0,0 +1,292 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved. -+ */ -+ -+/* -+ * Interrupt support for AR531X WiSOC. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#include "ar531xlnx.h" -+#include -+ -+extern int setup_irq(unsigned int irq, struct irqaction *irqaction); -+ -+static void ar531x_misc_intr_enable(unsigned int irq); -+static void ar531x_misc_intr_disable(unsigned int irq); -+ -+/* Turn on the specified AR531X_MISC_IRQ interrupt */ -+static unsigned int -+ar531x_misc_intr_startup(unsigned int irq) -+{ -+ ar531x_misc_intr_enable(irq); -+ return 0; -+} -+ -+/* Turn off the specified AR531X_MISC_IRQ interrupt */ -+static void -+ar531x_misc_intr_shutdown(unsigned int irq) -+{ -+ ar531x_misc_intr_disable(irq); -+} -+ -+/* Enable the specified AR531X_MISC_IRQ interrupt */ -+static void -+ar531x_misc_intr_enable(unsigned int irq) -+{ -+ unsigned int imr; -+ -+ imr = sysRegRead(AR531X_IMR); -+ imr |= (1 << (irq - AR531X_MISC_IRQ_BASE - 1)); -+ sysRegWrite(AR531X_IMR, imr); -+ sysRegRead(AR531X_IMR); /* flush write buffer */ -+} -+ -+/* Disable the specified AR531X_MISC_IRQ interrupt */ -+static void -+ar531x_misc_intr_disable(unsigned int irq) -+{ -+ unsigned int imr; -+ -+ imr = sysRegRead(AR531X_IMR); -+ imr &= ~(1 << (irq - AR531X_MISC_IRQ_BASE - 1)); -+ sysRegWrite(AR531X_IMR, imr); -+ sysRegRead(AR531X_IMR); /* flush write buffer */ -+} -+ -+static void -+ar531x_misc_intr_ack(unsigned int irq) -+{ -+ ar531x_misc_intr_disable(irq); -+} -+ -+static void -+ar531x_misc_intr_end(unsigned int irq) -+{ -+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) -+ ar531x_misc_intr_enable(irq); -+} -+ -+static void -+ar531x_misc_intr_set_affinity(unsigned int irq, unsigned long mask) -+{ -+ /* Only 1 CPU; ignore affinity request */ -+} -+ -+struct hw_interrupt_type ar531x_misc_intr_controller = { -+ "AR531X MISC", -+ ar531x_misc_intr_startup, -+ ar531x_misc_intr_shutdown, -+ ar531x_misc_intr_enable, -+ ar531x_misc_intr_disable, -+ ar531x_misc_intr_ack, -+ ar531x_misc_intr_end, -+ ar531x_misc_intr_set_affinity, -+}; -+ -+int ar531x_misc_irq_base; -+ -+/* -+ * Determine interrupt source among interrupts that use IP6 -+ */ -+void -+ar531x_misc_intr_init(int irq_base) -+{ -+ int i; -+ -+ for (i = irq_base; i < irq_base + AR531X_MISC_IRQ_COUNT; i++) { -+ irq_desc[i].status = IRQ_DISABLED; -+ irq_desc[i].action = NULL; -+ irq_desc[i].depth = 1; -+ irq_desc[i].handler = &ar531x_misc_intr_controller; -+ } -+ -+ ar531x_misc_irq_base = irq_base; -+} -+ -+/* ARGSUSED */ -+void -+spurious_irq_handler(int cpl, void *dev_id, struct pt_regs *regs) -+{ -+ /* -+ printk("spurious_irq_handler: %d cause=0x%8.8x status=0x%8.8x\n", -+ cpl, cause_intrs, status_intrs); -+ */ -+} -+ -+/* ARGSUSED */ -+void -+spurious_misc_handler(int cpl, void *dev_id, struct pt_regs *regs) -+{ -+ /* -+ printk("spurious_misc_handler: 0x%x isr=0x%8.8x imr=0x%8.8x\n", -+ cpl, ar531x_isr, ar531x_imr); -+ */ -+} -+ -+void -+ar531x_timer_handler(int cpl, void *dev_id, struct pt_regs *regs) -+{ -+ (void)sysRegRead(AR531X_TIMER); /* clear interrupt */ -+} -+ -+void -+ar531x_ahb_proc_handler(int cpl, void *dev_id, struct pt_regs *regs) -+{ -+ u32 procAddr; -+ u32 proc1; -+ u32 dmaAddr; -+ u32 dma1; -+ -+ proc1 = sysRegRead(AR531X_PROC1); -+ procAddr = sysRegRead(AR531X_PROCADDR); /* clears error state */ -+ dma1 = sysRegRead(AR531X_DMA1); -+ dmaAddr = sysRegRead(AR531X_DMAADDR); /* clears error state */ -+ -+ printk("AHB interrupt: PROCADDR=0x%8.8x PROC1=0x%8.8x DMAADDR=0x%8.8x DMA1=0x%8.8x\n", -+ procAddr, proc1, dmaAddr, dma1); -+ -+ machine_restart("AHB error"); /* Catastrophic failure */ -+} -+ -+static struct irqaction cascade = -+ {no_action, SA_INTERRUPT, 0, "cascade", -+ NULL, NULL}; -+ -+static struct irqaction spurious_irq = -+ {spurious_irq_handler, SA_INTERRUPT, 0, "spurious_irq", -+ NULL, NULL}; -+ -+static struct irqaction spurious_misc = -+ {spurious_misc_handler, SA_INTERRUPT, 0, "spurious_misc", -+ NULL, NULL}; -+ -+static struct irqaction ar531x_timer_interrupt = -+ {ar531x_timer_handler, SA_INTERRUPT, 0, "ar531x_timer_interrupt", -+ NULL, NULL}; -+ -+static struct irqaction ar531x_ahb_proc_interrupt = -+ {ar531x_ahb_proc_handler, SA_INTERRUPT, 0, "ar531x_ahb_proc_interrupt", -+ NULL, NULL}; -+ -+extern asmlinkage void ar531x_interrupt_receive(void); -+ -+/* -+ * Called when an interrupt is received, this function -+ * determines exactly which interrupt it was, and it -+ * invokes the appropriate handler. -+ * -+ * Implicitly, we also define interrupt priority by -+ * choosing which to dispatch first. -+ */ -+void -+ar531x_irq_dispatch(struct pt_regs *regs) -+{ -+ int cause_intrs = regs->cp0_cause; -+ int status_intrs = regs->cp0_status; -+ int pending = cause_intrs & status_intrs; -+ -+ if (pending & CAUSEF_IP2) { -+ do_IRQ(AR531X_IRQ_WLAN0_INTRS, regs); -+ } -+ else if (pending & CAUSEF_IP3) { -+ do_IRQ(AR531X_IRQ_ENET0_INTRS, regs); -+ } -+ else if (pending & CAUSEF_IP4) { -+ do_IRQ(AR531X_IRQ_ENET1_INTRS, regs); -+ } -+ else if (pending & CAUSEF_IP5) { -+ do_IRQ(AR531X_IRQ_WLAN1_INTRS, regs); -+ } -+ else if (pending & CAUSEF_IP6) { -+ AR531X_REG ar531x_isr = sysRegRead(AR531X_ISR); -+ AR531X_REG ar531x_imr = sysRegRead(AR531X_IMR); -+ unsigned int ar531x_misc_intrs = ar531x_isr & ar531x_imr; -+ -+ if (ar531x_misc_intrs & AR531X_ISR_TIMER) -+ do_IRQ(AR531X_MISC_IRQ_TIMER, regs); -+ else if (ar531x_misc_intrs & AR531X_ISR_AHBPROC) -+ do_IRQ(AR531X_MISC_IRQ_AHB_PROC, regs); -+ else if (ar531x_misc_intrs & AR531X_ISR_AHBDMA) -+ do_IRQ(AR531X_MISC_IRQ_AHB_DMA, regs); -+ else if (ar531x_misc_intrs & AR531X_ISR_GPIO) -+ { -+ int i; -+ u32 gpioIntPending; -+ -+ gpioIntPending = sysRegRead(AR531X_GPIO_DI) & gpioIntMask; -+ for (i=0; icp0_epc); -+ } -+#endif /* CONFIG_KGDB */ -+ } -+ else if (ar531x_misc_intrs & AR531X_ISR_WD) -+ do_IRQ(AR531X_MISC_IRQ_WATCHDOG, regs); -+ else if (ar531x_misc_intrs & AR531X_ISR_LOCAL) -+ do_IRQ(AR531X_MISC_IRQ_LOCAL, regs); -+ else -+ do_IRQ(AR531X_MISC_IRQ_NONE, regs); -+ } else if (pending & CAUSEF_IP7) -+ do_IRQ(AR531X_IRQ_CPU_CLOCK, regs); -+ else -+ do_IRQ(AR531X_IRQ_NONE, regs); -+} -+ -+void __init init_IRQ(void) -+{ -+ init_generic_irq(); -+ set_except_vector(0, ar531x_interrupt_receive); -+ -+ /* Initialize interrupt controllers */ -+ mips_cpu_irq_init(MIPS_CPU_IRQ_BASE); -+ ar531x_misc_intr_init(AR531X_MISC_IRQ_BASE); -+ ar531x_gpio_intr_init(AR531X_GPIO_IRQ_BASE); -+ setup_irq(AR531X_IRQ_MISC_INTRS, &cascade); -+ /* -+ * AR531X_IRQ_CPU_CLOCK is setup by ar531x_timer_setup. -+ */ -+ -+ /* Default "spurious interrupt" handlers */ -+ setup_irq(AR531X_IRQ_NONE, &spurious_irq); -+ setup_irq(AR531X_MISC_IRQ_NONE, &spurious_misc); -+ setup_irq(AR531X_GPIO_IRQ_NONE, &spurious_gpio); -+ -+ setup_irq(AR531X_MISC_IRQ_TIMER, &ar531x_timer_interrupt); -+ setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar531x_ahb_proc_interrupt); -+ setup_irq(AR531X_MISC_IRQ_GPIO, &cascade); -+ -+#ifdef CONFIG_KGDB -+#if CONFIG_EARLY_STOP -+ kgdbInit(); -+#endif -+#endif -+} -diff -urN linux-2.4.32/arch/mips/ar531x/ar531xksyms.c linux-2.4.32.new/arch/mips/ar531x/ar531xksyms.c ---- linux-2.4.32/arch/mips/ar531x/ar531xksyms.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32.new/arch/mips/ar531x/ar531xksyms.c 2005-12-24 20:29:42.132306768 +0000 -@@ -0,0 +1,16 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved. -+ */ -+ -+#include -+#include "asm/atheros/ar531xbsp.h" -+ -+#if CONFIG_KGDB -+EXPORT_SYMBOL(kgdbInit); -+EXPORT_SYMBOL(kgdbEnabled); -+#endif -+EXPORT_SYMBOL(ar531x_sys_frequency); -diff -urN linux-2.4.32/arch/mips/ar531x/ar531xlnx.h linux-2.4.32.new/arch/mips/ar531x/ar531xlnx.h ---- linux-2.4.32/arch/mips/ar531x/ar531xlnx.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32.new/arch/mips/ar531x/ar531xlnx.h 2005-12-24 20:29:42.133306616 +0000 -@@ -0,0 +1,122 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved. -+ */ -+ -+/* -+ * This file contains definitions needed in order to compile -+ * AR531X products for linux. Definitions that are largely -+ * AR531X-specific and independent of operating system belong -+ * in ar531x.h rather than this file. -+ */ -+#include "ar531x.h" -+ -+#define MIPS_CPU_IRQ_BASE 0x00 -+#define AR531X_HIGH_PRIO 0x10 -+#define AR531X_MISC_IRQ_BASE 0x20 -+#define AR531X_GPIO_IRQ_BASE 0x30 -+ -+/* Software's idea of interrupts handled by "CPU Interrupt Controller" */ -+#define AR531X_IRQ_NONE MIPS_CPU_IRQ_BASE+0 -+#define AR531X_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */ -+#define AR531X_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */ -+#define AR531X_IRQ_ENET1_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */ -+#define AR531X_IRQ_WLAN1_INTRS MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */ -+#define AR531X_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */ -+#define AR531X_IRQ_CPU_CLOCK MIPS_CPU_IRQ_BASE+7 /* C0_CAUSE: 0x8000 */ -+ -+/* Miscellaneous interrupts, which share IP6 */ -+#define AR531X_MISC_IRQ_NONE AR531X_MISC_IRQ_BASE+0 -+#define AR531X_MISC_IRQ_TIMER AR531X_MISC_IRQ_BASE+1 -+#define AR531X_MISC_IRQ_AHB_PROC AR531X_MISC_IRQ_BASE+2 -+#define AR531X_MISC_IRQ_AHB_DMA AR531X_MISC_IRQ_BASE+3 -+#define AR531X_MISC_IRQ_GPIO AR531X_MISC_IRQ_BASE+4 -+#define AR531X_MISC_IRQ_UART0 AR531X_MISC_IRQ_BASE+5 -+#define AR531X_MISC_IRQ_UART0_DMA AR531X_MISC_IRQ_BASE+6 -+#define AR531X_MISC_IRQ_WATCHDOG AR531X_MISC_IRQ_BASE+7 -+#define AR531X_MISC_IRQ_LOCAL AR531X_MISC_IRQ_BASE+8 -+#define AR531X_MISC_IRQ_COUNT 9 -+ -+/* GPIO Interrupts [0..7], share AR531X_MISC_IRQ_GPIO */ -+#define AR531X_GPIO_IRQ_NONE AR531X_MISC_IRQ_BASE+0 -+#define AR531X_GPIO_IRQ(n) AR531X_MISC_IRQ_BASE+(n)+1 -+#define AR531X_GPIO_IRQ_COUNT 9 -+ -+#define PHYS_TO_K1(physaddr) KSEG1ADDR(physaddr) -+#define PHYS_TO_K0(physaddr) KSEG0ADDR(physaddr) -+#define UNMAPPED_TO_PHYS(vaddr) PHYSADDR(vaddr) -+#define IS_UNMAPPED_VADDR(vaddr) \ -+ ((KSEGX(vaddr) == KSEG0) || (KSEGX(vaddr) == KSEG1)) -+ -+/* IOCTL commands for /proc/ar531x */ -+#define AR531X_CTRL_DO_BREAKPOINT 1 -+#define AR531X_CTRL_DO_MADWIFI 2 -+ -+/* -+ * Definitions for operating system portability. -+ * These are vxWorks-->Linux translations. -+ */ -+#define LOCAL static -+#define BOOL int -+#define TRUE 1 -+#define FALSE 0 -+#define UINT8 u8 -+#define UINT16 u16 -+#define UINT32 u32 -+#define PRINTF printk -+#if /* DEBUG */ 1 -+#define DEBUG_PRINTF printk -+#define INLINE -+#else -+DEBUG_PRINTF while (0) printk -+#define INLINE inline -+#endif -+#define sysUDelay(usecs) udelay(usecs) -+#define sysMsDelay(msecs) mdelay(msecs) -+typedef volatile UINT8 *VIRT_ADDR; -+#define MALLOC(sz) kmalloc(sz, GFP_KERNEL) -+#define MALLOC_NOSLEEP(sz) kmalloc(sz, GFP_ATOMIC) -+#define FREE(ptr) kfree((void *)ptr) -+#define BSP_BUG() do { printk("kernel BSP BUG at %s:%d!\n", __FILE__, __LINE__); *(int *)0=0; } while (0) -+#define BSP_BUG_ON(condition) do { if (unlikely((condition)!=0)) BSP_BUG(); } while(0) -+#define ASSERT(x) BSP_BUG_ON(!(x)) -+ -+extern struct ar531x_boarddata *ar531x_board_configuration; -+extern char *ar531x_radio_configuration; -+extern char *enet_mac_address_get(int MACUnit); -+ -+extern void kgdbInit(void); -+extern int kgdbEnabled(void); -+extern void breakpoint(void); -+extern int kgdbInterrupt(void); -+extern unsigned int ar531x_cpu_frequency(void); -+extern unsigned int ar531x_sys_frequency(void); -+ -+/* GPIO support */ -+extern struct irqaction spurious_gpio; -+extern unsigned int gpioIntMask; -+extern void ar531x_gpio_intr_init(int irq_base); -+extern void ar531x_gpio_ctrl_output(int gpio); -+extern void ar531x_gpio_ctrl_input(int gpio); -+extern void ar531x_gpio_set(int gpio, int val); -+extern int ar531x_gpio_get(int gpio); -+extern void ar531x_gpio_intr_enable(unsigned int irq); -+extern void ar531x_gpio_intr_disable(unsigned int irq); -+ -+/* Watchdog Timer support */ -+extern int watchdog_start(unsigned int milliseconds); -+extern int watchdog_stop(void); -+extern int watchdog_is_enabled(void); -+extern unsigned int watchdog_min_timer_reached(void); -+extern void watchdog_notify_alive(void); -+ -+#define A_DATA_CACHE_INVAL(start, length) \ -+ dma_cache_inv((UINT32)(start),(length)) -+ -+#define sysWbFlush() mb() -+ -+#define intDisable(x) cli() -+#define intEnable(x) sti() -diff -urN linux-2.4.32/arch/mips/ar531x/ar531xprom.c linux-2.4.32.new/arch/mips/ar531x/ar531xprom.c ---- linux-2.4.32/arch/mips/ar531x/ar531xprom.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32.new/arch/mips/ar531x/ar531xprom.c 2005-12-24 20:29:42.133306616 +0000 -@@ -0,0 +1,84 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright MontaVista Software Inc -+ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved. -+ */ -+ -+/* -+ * Prom setup file for ar531x -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+#include "ar531xlnx.h" -+ -+#define COMMAND_LINE_SIZE 512 -+ -+char arcs_cmdline[COMMAND_LINE_SIZE]; -+ -+void __init prom_init(int argc, char *argv[]) -+{ -+ int i; -+ unsigned int memcfg1; -+ int bank0AC, bank1AC; -+ int memsz_in_mb; -+ -+ strcpy(arcs_cmdline, "console=ttyS0,9600"); -+ for (i=0; i> MEM_CFG1_AC0_S; -+ bank1AC = (memcfg1 & MEM_CFG1_AC1) >> MEM_CFG1_AC1_S; -+ memsz_in_mb = (bank0AC ? (1 << (bank0AC+1)) : 0) -+ + (bank1AC ? (1 << (bank1AC+1)) : 0); -+ -+ /* -+ * By default, use all available memory. You can override this -+ * to use, say, 8MB by specifying "mem=8M" as an argument on the -+ * linux bootup command line. -+ */ -+ add_memory_region(0, memsz_in_mb << 20, BOOT_MEM_RAM); -+} -+ -+void __init prom_free_prom_memory(void) -+{ -+} -diff -urN linux-2.4.32/arch/mips/ar531x/ar531xsetup.c linux-2.4.32.new/arch/mips/ar531x/ar531xsetup.c ---- linux-2.4.32/arch/mips/ar531x/ar531xsetup.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32.new/arch/mips/ar531x/ar531xsetup.c 2005-12-24 20:29:42.133306616 +0000 -@@ -0,0 +1,240 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved. -+ */ -+ -+/* -+ * Initialization for ar531x SOC. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "ar531xlnx.h" -+ -+void -+ar531x_restart(char *command) -+{ -+ for(;;) { -+ sysRegWrite(AR531X_RESET, AR531X_RESET_SYSTEM); -+ } -+} -+ -+void -+ar531x_halt(void) -+{ -+ printk(KERN_NOTICE "\n** You can safely turn off the power\n"); -+ while (1); -+} -+ -+void -+ar531x_power_off(void) -+{ -+ ar531x_halt(); -+} -+ -+const char * -+get_system_type(void) -+{ -+ return "Atheros AR531X"; -+} -+ -+/* -+ * This table is indexed by bits 5..4 of the CLOCKCTL1 register -+ * to determine the predevisor value. -+ */ -+static int CLOCKCTL1_PREDIVIDE_TABLE[4] = { -+ 1, -+ 2, -+ 4, -+ 5 -+}; -+ -+unsigned int -+ar531x_cpu_frequency(void) -+{ -+ static unsigned int ar531x_calculated_cpu_freq; -+ unsigned int clockctl1_predivide_mask; -+ unsigned int clockctl1_predivide_shift; -+ unsigned int clockctl1_multiplier_mask; -+ unsigned int clockctl1_multiplier_shift; -+ unsigned int clockctl1_doubler_mask; -+ int wisoc_revision; -+ -+ /* -+ * Trust the bootrom's idea of cpu frequency. -+ */ -+ ar531x_calculated_cpu_freq = sysRegRead(AR5312_SCRATCH); -+ if (ar531x_calculated_cpu_freq) -+ return ar531x_calculated_cpu_freq; -+ -+ wisoc_revision = (sysRegRead(AR531X_REV) & AR531X_REV_MAJ) >> AR531X_REV_MAJ_S; -+ if (wisoc_revision == AR531X_REV_MAJ_AR2313) { -+ clockctl1_predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK; -+ clockctl1_predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT; -+ clockctl1_multiplier_mask = AR2313_CLOCKCTL1_MULTIPLIER_MASK; -+ clockctl1_multiplier_shift = AR2313_CLOCKCTL1_MULTIPLIER_SHIFT; -+ clockctl1_doubler_mask = AR2313_CLOCKCTL1_DOUBLER_MASK; -+ } else { /* AR5312 and AR2312 */ -+ clockctl1_predivide_mask = AR5312_CLOCKCTL1_PREDIVIDE_MASK; -+ clockctl1_predivide_shift = AR5312_CLOCKCTL1_PREDIVIDE_SHIFT; -+ clockctl1_multiplier_mask = AR5312_CLOCKCTL1_MULTIPLIER_MASK; -+ clockctl1_multiplier_shift = AR5312_CLOCKCTL1_MULTIPLIER_SHIFT; -+ clockctl1_doubler_mask = AR5312_CLOCKCTL1_DOUBLER_MASK; -+ } -+ -+ /* -+ * Clocking is derived from a fixed 40MHz input clock. -+ * cpuFreq = InputClock * MULT (where MULT is PLL multiplier) -+ * -+ * sysFreq = cpuFreq / 4 (used for APB clock, serial, -+ * flash, Timer, Watchdog Timer) -+ * -+ * cntFreq = cpuFreq / 2 (use for CPU count/compare) -+ * -+ * So, for example, with a PLL multiplier of 5, we have -+ * cpuFrez = 200MHz -+ * sysFreq = 50MHz -+ * cntFreq = 100MHz -+ * -+ * We compute the CPU frequency, based on PLL settings. -+ */ -+ if (ar531x_calculated_cpu_freq == 0) { -+ unsigned int clockCtl1 = sysRegRead(AR5312_CLOCKCTL1); -+ -+ int preDivideSelect = (clockCtl1 & clockctl1_predivide_mask) >> -+ clockctl1_predivide_shift; -+ -+ int preDivisor = CLOCKCTL1_PREDIVIDE_TABLE[preDivideSelect]; -+ -+ int multiplier = (clockCtl1 & clockctl1_multiplier_mask) >> -+ clockctl1_multiplier_shift; -+ -+ if (clockCtl1 & clockctl1_doubler_mask) { -+ multiplier = multiplier << 1; -+ } -+ -+ ar531x_calculated_cpu_freq = (40000000 / preDivisor) * multiplier; -+ } -+ -+ return ar531x_calculated_cpu_freq; -+} -+ -+unsigned int -+ar531x_sys_frequency(void) -+{ -+ static unsigned int ar531x_calculated_sys_freq = 0; -+ -+ if (ar531x_calculated_sys_freq == 0) { -+ ar531x_calculated_sys_freq = ar531x_cpu_frequency() / 4; -+ } -+ -+ return ar531x_calculated_sys_freq; -+} -+ -+static void __init -+flash_setup(void) -+{ -+ UINT32 flash_ctl; -+ -+ /* Configure flash bank 0 */ -+ flash_ctl = FLASHCTL_E | -+ FLASHCTL_AC_8M | -+ FLASHCTL_RBLE | -+ (0x01 << FLASHCTL_IDCY_S) | -+ (0x07 << FLASHCTL_WST1_S) | -+ (0x07 << FLASHCTL_WST2_S) | -+ (sysRegRead(AR531X_FLASHCTL0) & FLASHCTL_MW); -+ -+ sysRegWrite(AR531X_FLASHCTL0, flash_ctl); -+ -+ /* Disable other flash banks */ -+ sysRegWrite(AR531X_FLASHCTL1, -+ sysRegRead(AR531X_FLASHCTL1) & ~(FLASHCTL_E | FLASHCTL_AC)); -+ -+ sysRegWrite(AR531X_FLASHCTL2, -+ sysRegRead(AR531X_FLASHCTL2) & ~(FLASHCTL_E | FLASHCTL_AC)); -+} -+ -+ -+ -+void __init -+serial_setup(void) -+{ -+ struct serial_struct s; -+ -+ memset(&s, 0, sizeof(s)); -+ -+ s.flags = STD_COM_FLAGS; -+ s.io_type = SERIAL_IO_MEM; -+ s.baud_base = ar531x_sys_frequency()/16; -+ s.irq = AR531X_MISC_IRQ_UART0; -+ s.iomem_reg_shift = 2; -+ s.iomem_base = (u8 *)0xbc000003; -+ -+ if (early_serial_setup(&s) != 0) -+ printk(KERN_ERR "early_serial_setup failed\n"); -+} -+ -+extern int setup_irq(unsigned int irq, struct irqaction *irqaction); -+static void __init -+ar531x_timer_setup(struct irqaction *irq) -+{ -+ unsigned int count; -+ -+ /* Usually irq is timer_irqaction (timer_interrupt) */ -+ setup_irq(AR531X_IRQ_CPU_CLOCK, irq); -+ -+ /* to generate the first CPU timer interrupt */ -+ count = read_c0_count(); -+ write_c0_compare(count + 1000); -+} -+ -+extern void (*board_time_init)(void); -+ -+static void __init -+ar531x_time_init(void) -+{ -+ mips_hpt_frequency = ar531x_cpu_frequency() / 2; -+} -+ -+void __init -+ar531x_setup(void) -+{ -+ /* Clear any lingering AHB errors */ -+ sysRegRead(AR531X_PROCADDR); -+ sysRegRead(AR531X_DMAADDR); -+ -+ sysRegWrite(AR531X_WD_CTRL, AR531X_WD_CTRL_IGNORE_EXPIRATION); -+ -+ /* Disable data watchpoints */ -+ write_c0_watchlo0(0); -+ -+ board_time_init = ar531x_time_init; -+ board_timer_setup = ar531x_timer_setup; -+ -+ _machine_restart = ar531x_restart; -+ _machine_halt = ar531x_halt; -+ _machine_power_off = ar531x_power_off; -+ -+ flash_setup(); -+ serial_setup(); -+} -diff -urN linux-2.4.32/arch/mips/ar531x/Makefile linux-2.4.32.new/arch/mips/ar531x/Makefile ---- linux-2.4.32/arch/mips/ar531x/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32.new/arch/mips/ar531x/Makefile 2005-12-24 20:29:42.010325312 +0000 -@@ -0,0 +1,33 @@ -+# -+# This file is subject to the terms and conditions of the GNU General Public -+# License. See the file "COPYING" in the main directory of this archive -+# for more details. -+# -+# Copyright © 2003 Atheros Communications, Inc., All Rights Reserved. -+# -+ -+# Makefile for Atheros ar531x boards -+# -+# Note! Dependencies are done automagically by 'make dep', which also -+# removes any old dependencies. DON'T put your own dependencies here -+# unless it's something special (ie not a .c file). -+# -+ -+.S.s: -+ $(CPP) $(CFLAGS) $< -o $*.s -+.S.o: -+ $(CC) $(CFLAGS) -D__ASSEMBLY__ -c $< -o $*.o -+ -+O_TARGET:= ar531x.o -+ -+export-objs = ar531xksyms.o -+ -+obj-y := ar531xdbg_io.o \ -+ ar531xsetup.o \ -+ ar531xprom.o \ -+ ar531xirq.o \ -+ ar531xintr.o \ -+ ar531xgpio.o \ -+ ar531xksyms.o -+ -+include $(TOPDIR)/Rules.make -diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/backup-busybox.links linux-2.4.32.new/arch/mips/ar531x/RAMDISK/backup-busybox.links ---- linux-2.4.32/arch/mips/ar531x/RAMDISK/backup-busybox.links 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/backup-busybox.links 2005-12-24 20:29:42.011325160 +0000 -@@ -0,0 +1,33 @@ -+/usr/bin/[ -+/sbin/brctl -+/bin/cat -+/bin/chmod -+/bin/cp -+/bin/df -+/bin/echo -+/bin/false -+/sbin/ifconfig -+/sbin/init -+/sbin/insmod -+/bin/kill -+/bin/ls -+/sbin/lsmod -+/bin/mkdir -+/sbin/modprobe -+/bin/mount -+/bin/msh -+/bin/mv -+/bin/ping -+/bin/ps -+/bin/pwd -+/sbin/reboot -+/bin/rm -+/bin/rmdir -+/sbin/rmmod -+/sbin/route -+/bin/sh -+/usr/bin/test -+/usr/bin/top -+/bin/true -+/bin/umount -+/usr/bin/wget -diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/busybox.links linux-2.4.32.new/arch/mips/ar531x/RAMDISK/busybox.links ---- linux-2.4.32/arch/mips/ar531x/RAMDISK/busybox.links 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/busybox.links 2005-12-24 20:29:42.011325160 +0000 -@@ -0,0 +1,33 @@ -+/usr/bin/[ -+/sbin/brctl -+/bin/cat -+/bin/chmod -+/bin/cp -+/bin/df -+/bin/echo -+/bin/false -+/sbin/ifconfig -+/sbin/init -+/sbin/insmod -+/bin/kill -+/bin/ls -+/sbin/lsmod -+/bin/mkdir -+/sbin/modprobe -+/bin/mount -+/bin/msh -+/bin/mv -+/bin/ping -+/bin/ps -+/bin/pwd -+/sbin/reboot -+/bin/rm -+/bin/rmdir -+/sbin/rmmod -+/sbin/route -+/bin/sh -+/usr/bin/test -+/bin/true -+/bin/umount -+/bin/uname -+/usr/bin/wget -diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/Makefile linux-2.4.32.new/arch/mips/ar531x/RAMDISK/Makefile ---- linux-2.4.32/arch/mips/ar531x/RAMDISK/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/Makefile 2005-12-24 20:29:42.011325160 +0000 -@@ -0,0 +1,53 @@ -+KERNEL_SOURCE=../../../.. -+ -+# The value for INITRDSIZE is extracted from linux/.config, -+# if it exists; otherwise, a default value is used. -+ -+CONFIG_FILE = $(KERNEL_SOURCE)/.config -+ -+ifeq ($(CONFIG_FILE),$(wildcard $(CONFIG_FILE))) -+ -+include $(CONFIG_FILE) -+ifdef CONFIG_BLK_DEV_RAM_SIZE -+INITRDSIZE := $(shell echo $(CONFIG_BLK_DEV_RAM_SIZE)) -+else -+INITRDSIZE := 8192 -+endif -+ -+else -+INITRDSIZE := 8192 -+endif -+ -+MOUNTPT = /mnt/xtmp -+ -+ramdisk.gz: ramdisk -+ gzip -f ramdisk -+ -+ramdisk: -+ ./makelinks -+ @echo "CREATING RAMDISK OF SIZE $(INITRDSIZE) on $@" -+ dd if=/dev/zero of=$@ bs=1k count=$(INITRDSIZE) -+ /sbin/mke2fs -vFm0 $@ $(INITRDSIZE) -+ if [ \! -e $(MOUNTPT) ]; then mkdir -p $(MOUNTPT) ; fi -+ mount -o loop $@ $(MOUNTPT) -+ @df $(MOUNTPT) -+ (cd rootdir; tar cf - . ) | (cd $(MOUNTPT) && tar xf - ) -+ (cd $(MOUNTPT) ; chown -R root.root . ) -+ @df $(MOUNTPT) -+ umount $(MOUNTPT) -+ -+install: -+ @(if [ -d $(KERNEL_SOURCE)/arch/mips/ramdisk ]; \ -+ then \ -+ if [ -f ramdisk.gz ]; \ -+ then \ -+ cp ramdisk.gz $(KERNEL_SOURCE)/arch/mips/ramdisk/; \ -+ else \ -+ echo "No ramdisk.gz image"; \ -+ fi; \ -+ else \ -+ echo "No ramdisk directory. Check KERNEL_SOURCE variable."; \ -+ fi) -+ -+clean: -+ rm -f ramdisk.gz ramdisk -diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/makelinks linux-2.4.32.new/arch/mips/ar531x/RAMDISK/makelinks ---- linux-2.4.32/arch/mips/ar531x/RAMDISK/makelinks 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/makelinks 2005-12-24 20:29:42.012325008 +0000 -@@ -0,0 +1,65 @@ -+#!/bin/sh -+ -+if [ -f busybox.links ] -+then -+ cat busybox.links | sed 's/\//ln -s -f \/bin\/busybox rootdir\//' | /bin/sh -+fi -+ -+cons=" root tty 622" -+disk=" root disk 660" -+mtd=" root root 640" -+makedev () { # usage: makedev name [bcu] major minor owner group mode -+ if [ "$opt_v" ] -+ then if [ "$opt_d" ] -+ then echo "rm -f $1" -+ else echo "$1 = $2 $3 $4 $5:$6 $7" -+ fi -+ fi -+ [ ! "$opt_n" ] && rm -f $1 && -+ [ ! "$opt_d" ] && mknod $1 $2 $3 $4 && -+ chown $5:$6 $1 && -+ chmod $7 $1 -+} -+ -+makedev rootdir/dev/console c 5 1 $cons -+makedev rootdir/dev/ram b 1 1 $disk -+makedev rootdir/dev/ram0 b 1 0 $disk -+makedev rootdir/dev/ram1 b 1 1 $disk -+makedev rootdir/dev/ram2 b 1 2 $disk -+makedev rootdir/dev/ram3 b 1 3 $disk -+makedev rootdir/dev/ram4 b 1 4 $disk -+makedev rootdir/dev/ram5 b 1 5 $disk -+makedev rootdir/dev/ram6 b 1 6 $disk -+makedev rootdir/dev/ram7 b 1 7 $disk -+makedev rootdir/dev/ram8 b 1 8 $disk -+makedev rootdir/dev/ram9 b 1 9 $disk -+makedev rootdir/dev/ram10 b 1 10 $disk -+makedev rootdir/dev/ram11 b 1 11 $disk -+makedev rootdir/dev/ram12 b 1 12 $disk -+makedev rootdir/dev/ram13 b 1 13 $disk -+makedev rootdir/dev/ram14 b 1 14 $disk -+makedev rootdir/dev/ram15 b 1 15 $disk -+ -+makedev rootdir/dev/mtd0 c 90 0 $mtd -+makedev rootdir/dev/mtd1 c 90 2 $mtd -+makedev rootdir/dev/mtd2 c 90 4 $mtd -+makedev rootdir/dev/mtd3 c 90 6 $mtd -+makedev rootdir/dev/mtd4 c 90 8 $mtd -+makedev rootdir/dev/mtd5 c 90 10 $mtd -+makedev rootdir/dev/mtd6 c 90 12 $mtd -+makedev rootdir/dev/mtdblock0 b 31 0 $mtd -+makedev rootdir/dev/mtdblock1 b 31 1 $mtd -+makedev rootdir/dev/mtdblock2 b 31 2 $mtd -+makedev rootdir/dev/mtdblock3 b 31 3 $mtd -+makedev rootdir/dev/mtdblock4 b 31 4 $mtd -+makedev rootdir/dev/mtdblock5 b 31 5 $mtd -+makedev rootdir/dev/mtdblock6 b 31 6 $mtd -+makedev rootdir/dev/mtdr0 c 90 1 $mtd -+makedev rootdir/dev/mtdr1 c 90 3 $mtd -+makedev rootdir/dev/mtdr2 c 90 5 $mtd -+makedev rootdir/dev/mtdr3 c 90 7 $mtd -+makedev rootdir/dev/mtdr4 c 90 9 $mtd -+makedev rootdir/dev/mtdr5 c 90 11 $mtd -+makedev rootdir/dev/mtdr6 c 90 13 $mtd -+ -+cd rootdir/dev;ln -sf ram1 ram -diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/README linux-2.4.32.new/arch/mips/ar531x/RAMDISK/README ---- linux-2.4.32/arch/mips/ar531x/RAMDISK/README 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/README 2005-12-24 20:29:42.011325160 +0000 -@@ -0,0 +1,40 @@ -+How to build a ramdisk image for use as a root filesystem with AR531X -+ -+Overview: -+In order to boot from a ramdisk root file system image, you will -+first create a root directory structure in the "rootdir" directory. -+Then run "make" to create a compressed root file system image in -+ramdisk.gz. Finally, copy this image into your kernel source tree -+and remake the kernel. The ramdisk image is then built into the -+kernel. When the kernel starts, it is uncompressed into RAM, and -+used as a root file system. -+ -+If you'd like to use a pre-built ramdisk.gz rather than build -+one yourself: -+ cp arch/mips/ar531x/RAMDISK/ramdisk.gz arch/mips/ramdisk/ramdisk.gz -+ -+Here are the detailed steps to build your own: -+ -+1) Modify Makefile to point KERNEL_SOURCE at your linux source tree. -+ -+2) Copy whatever additional files/directories/links you'd like to -+ under rootdir. Note that you're limited to CONFIG_BLK_DEV_RAM_SIZE -+ 1KB blocks, as specified in your linux/.config file. -+ Examples: -+ Copy busybox to rootdir/bin/ -+ [NOTE: Copy busybox.links to this directory to -+ cause the makelinks script to automatically -+ set up all of the necessary busybox command links -+ in the rootdir/bin directory]. -+ -+ Copy any wireless driver modules into rootdir tree -+ -+ You might want to make a copy of the rootdir directory -+ before you modify it, just in case you want to get back -+ to the original. -+ -+3) LOGIN AS ROOT (e.g. "su") and type "make" -+ -+4) Copy the resulting ramdisk.gz to your linux source tree under -+ arch/mips/ramdisk/ramdisk.gz -+ (or "make install" will do this step for you) -Binary files linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/bin/busybox and linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/bin/busybox differ -diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/fstab linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/fstab ---- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/fstab 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/fstab 2005-12-24 20:29:42.063317256 +0000 -@@ -0,0 +1 @@ -+/proc /proc proc defaults 0 0 -diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/group linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/group ---- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/group 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/group 2005-12-24 20:29:42.064317104 +0000 -@@ -0,0 +1,18 @@ -+root:x:0: -+wheel:x:10: -+bin:x:1:bin,daemon -+daemon:x:2:bin,daemon -+sys:x:3:bin,adm -+adm:x:4:adm,daemon -+tty:x:5: -+disk:x:6: -+lp:x:7:daemon,lp -+mem:x:8: -+kmem:x:9: -+operator:x:11: -+uucp:x:14:uucp -+dip:x:40: -+utmp:x:45: -+www:x:63: -+nobody:x:65534: -+users:x:100: -diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/host.conf linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/host.conf ---- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/host.conf 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/host.conf 2005-12-24 20:29:42.064317104 +0000 -@@ -0,0 +1,2 @@ -+order hosts,bind -+multi on -diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/inittab linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/inittab ---- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/inittab 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/inittab 2005-12-24 20:29:42.064317104 +0000 -@@ -0,0 +1,2 @@ -+::sysinit:/etc/rc.d/rcS -+::respawn:/bin/sh -diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/nsswitch.conf linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/nsswitch.conf ---- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/nsswitch.conf 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/nsswitch.conf 2005-12-24 20:29:42.065316952 +0000 -@@ -0,0 +1,16 @@ -+# /etc/nsswitch.conf -+# -+# Name Service Switch configuration file. -+# -+ -+passwd: compat -+shadow: compat -+group: compat -+ -+hosts: files dns -+networks: files dns -+ -+ethers: files -+protocols: files -+rpc: files -+services: files -diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/passwd linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/passwd ---- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/passwd 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/passwd 2005-12-24 20:29:42.065316952 +0000 -@@ -0,0 +1,11 @@ -+root:x:0:0:root:/root:/bin/ash -+bin:x:1:1:bin:/bin:/bin/sh -+daemon:x:2:2:daemon:/usr/sbin:/bin/sh -+adm:x:3:4:adm:/adm:/bin/sh -+lp:x:4:7:lp:/var/spool/lpd:/bin/sh -+sync:x:5:0:sync:/bin:/bin/sync -+shutdown:x:6:11:shutdown:/sbin:/sbin/shutdown -+halt:x:7:0:halt:/sbin:/sbin/halt -+uucp:x:10:14:uucp:/var/spool/uucp:/bin/sh -+operator:x:11:0:Operator:/var:/bin/sh -+nobody:x:65534:65534:nobody:/home:/bin/sh -diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/rc.d/rcS linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/rc.d/rcS ---- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/rc.d/rcS 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/rc.d/rcS 2005-12-24 20:29:42.066316800 +0000 -@@ -0,0 +1,17 @@ -+#!/bin/sh -+ -+mount -a -+mount -t jffs2 -o remount +w / -+# mount -t ramfs /dev/ram /ramdisk -+ -+echo Load MADWiFi wlan module -+insmod ../../lib/modules/2.4.25/net/wlan.o -+ -+echo Load MADWiFi Atheros HAL module -+insmod ../../lib/modules/2.4.25/net/ath_hal.o -+ -+echo Load MADWiFi Atheros Driver module -+insmod ../../lib/modules/2.4.25/net/ath_lbus.o -+ -+exit -+ -diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/resolv.conf linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/resolv.conf ---- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/resolv.conf 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/resolv.conf 2005-12-24 20:29:42.066316800 +0000 -@@ -0,0 +1,18 @@ -+# /etc/resolv.conf - DNS setup file -+# -+# possible entries are: -+# -+# domain Local domain name. If not present, the -+# gethostbyname syscall is used to -+# determine the local domain name. -+# -+# search Search list for hostname lookup. -+# The search list is normally determined -+# from the local domain name but it -+# can be set to a list of domains. -+# -+# nameserver Define which server to contact -+# for DNS lookups. If there are -+# multiple nameserver lines (Max=3), -+# they are queried in the listed order. -+# -diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/securetty linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/securetty ---- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/securetty 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/securetty 2005-12-24 20:29:42.066316800 +0000 -@@ -0,0 +1,12 @@ -+tty1 -+tty2 -+tty3 -+tty4 -+tty5 -+tty6 -+tty7 -+tty8 -+ttyS0 -+ttyS1 -+ttyS2 -+ttyS3 -diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/services linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/services ---- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/services 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/services 2005-12-24 20:29:42.066316800 +0000 -@@ -0,0 +1,193 @@ -+# $NetBSD: services,v 1.18 1996/03/26 00:07:58 mrg Exp $ -+# -+# Network services, Internet style -+# -+# Note that it is presently the policy of IANA to assign a single well-known -+# port number for both TCP and UDP; hence, most entries here have two entries -+# even if the protocol doesn't support UDP operations. -+# Updated from RFC 1340, ``Assigned Numbers'' (July 1992). Not all ports -+# are included, only the more common ones. -+# -+# from: @(#)services 5.8 (Berkeley) 5/9/91 -+# -+tcpmux 1/tcp # TCP port service multiplexer -+echo 7/tcp -+echo 7/udp -+discard 9/tcp sink null -+discard 9/udp sink null -+systat 11/tcp users -+daytime 13/tcp -+daytime 13/udp -+netstat 15/tcp -+qotd 17/tcp quote -+msp 18/tcp # message send protocol -+msp 18/udp # message send protocol -+chargen 19/tcp ttytst source -+chargen 19/udp ttytst source -+ftp-data 20/tcp # default ftp data port -+ftp 21/tcp -+ssh 22/tcp -+ssh 22/udp -+telnet 23/tcp -+# 24 - private -+smtp 25/tcp mail -+# 26 - unassigned -+time 37/tcp timserver -+time 37/udp timserver -+rlp 39/udp resource # resource location -+nameserver 42/tcp name # IEN 116 -+whois 43/tcp nicname -+domain 53/tcp nameserver # name-domain server -+domain 53/udp nameserver -+mtp 57/tcp # deprecated -+bootps 67/tcp # BOOTP server -+bootps 67/udp -+bootpc 68/tcp # BOOTP client -+bootpc 68/udp -+tftp 69/udp -+gopher 70/tcp # Internet Gopher -+gopher 70/udp -+rje 77/tcp netrjs -+finger 79/tcp -+www 80/tcp http # WorldWideWeb HTTP -+www 80/udp # HyperText Transfer Protocol -+link 87/tcp ttylink -+kerberos 88/tcp krb5 # Kerberos v5 -+kerberos 88/udp -+supdup 95/tcp -+# 100 - reserved -+hostnames 101/tcp hostname # usually from sri-nic -+iso-tsap 102/tcp tsap # part of ISODE. -+csnet-ns 105/tcp cso-ns # also used by CSO name server -+csnet-ns 105/udp cso-ns -+rtelnet 107/tcp # Remote Telnet -+rtelnet 107/udp -+pop2 109/tcp pop-2 postoffice # POP version 2 -+pop2 109/udp -+pop3 110/tcp pop-3 # POP version 3 -+pop3 110/udp -+sunrpc 111/tcp -+sunrpc 111/udp -+auth 113/tcp authentication tap ident -+sftp 115/tcp -+uucp-path 117/tcp -+nntp 119/tcp readnews untp # USENET News Transfer Protocol -+ntp 123/tcp -+ntp 123/udp # Network Time Protocol -+netbios-ns 137/tcp # NETBIOS Name Service -+netbios-ns 137/udp -+netbios-dgm 138/tcp # NETBIOS Datagram Service -+netbios-dgm 138/udp -+netbios-ssn 139/tcp # NETBIOS session service -+netbios-ssn 139/udp -+imap2 143/tcp imap # Interim Mail Access Proto v2 -+imap2 143/udp -+snmp 161/udp # Simple Net Mgmt Proto -+snmp-trap 162/udp snmptrap # Traps for SNMP -+cmip-man 163/tcp # ISO mgmt over IP (CMOT) -+cmip-man 163/udp -+cmip-agent 164/tcp -+cmip-agent 164/udp -+xdmcp 177/tcp # X Display Mgr. Control Proto -+xdmcp 177/udp -+nextstep 178/tcp NeXTStep NextStep # NeXTStep window -+nextstep 178/udp NeXTStep NextStep # server -+bgp 179/tcp # Border Gateway Proto. -+bgp 179/udp -+prospero 191/tcp # Cliff Neuman's Prospero -+prospero 191/udp -+irc 194/tcp # Internet Relay Chat -+irc 194/udp -+smux 199/tcp # SNMP Unix Multiplexer -+smux 199/udp -+at-rtmp 201/tcp # AppleTalk routing -+at-rtmp 201/udp -+at-nbp 202/tcp # AppleTalk name binding -+at-nbp 202/udp -+at-echo 204/tcp # AppleTalk echo -+at-echo 204/udp -+at-zis 206/tcp # AppleTalk zone information -+at-zis 206/udp -+z3950 210/tcp wais # NISO Z39.50 database -+z3950 210/udp wais -+ipx 213/tcp # IPX -+ipx 213/udp -+imap3 220/tcp # Interactive Mail Access -+imap3 220/udp # Protocol v3 -+ulistserv 372/tcp # UNIX Listserv -+ulistserv 372/udp -+# -+# UNIX specific services -+# -+exec 512/tcp -+biff 512/udp comsat -+login 513/tcp -+who 513/udp whod -+shell 514/tcp cmd # no passwords used -+syslog 514/udp -+printer 515/tcp spooler # line printer spooler -+talk 517/udp -+ntalk 518/udp -+route 520/udp router routed # RIP -+timed 525/udp timeserver -+tempo 526/tcp newdate -+courier 530/tcp rpc -+conference 531/tcp chat -+netnews 532/tcp readnews -+netwall 533/udp # -for emergency broadcasts -+uucp 540/tcp uucpd # uucp daemon -+remotefs 556/tcp rfs_server rfs # Brunhoff remote filesystem -+# -+webster 765/tcp # Network dictionary -+webster 765/udp -+# temporary entry (not officially registered by the Samba Team!) -+swat 901/tcp # Samba Web Administration Tool -+# -+# From ``Assigned Numbers'': -+# -+#> The Registered Ports are not controlled by the IANA and on most systems -+#> can be used by ordinary user processes or programs executed by ordinary -+#> users. -+# -+#> Ports are used in the TCP [45,106] to name the ends of logical -+#> connections which carry long term conversations. For the purpose of -+#> providing services to unknown callers, a service contact port is -+#> defined. This list specifies the port used by the server process as its -+#> contact port. While the IANA can not control uses of these ports it -+#> does register or list uses of these ports as a convienence to the -+#> community. -+# -+ingreslock 1524/tcp -+ingreslock 1524/udp -+prospero-np 1525/tcp # Prospero non-privileged -+prospero-np 1525/udp -+rfe 5002/tcp # Radio Free Ethernet -+rfe 5002/udp # Actually uses UDP only -+# -+# -+# Kerberos (Project Athena/MIT) services -+# Note that these are for Kerberos v4, and are unofficial. -+# -+klogin 543/tcp # Kerberos `rlogin' -+kshell 544/tcp krcmd # Kerberos `rsh' -+kerberos-adm 749/tcp # Kerberos `kadmin' (v5) -+kerberos4 750/udp kdc # Kerberos (server) udp -+kerberos4 750/tcp kdc # Kerberos (server) tcp -+kerberos-master 751/udp # Kerberos admin server udp -+kerberos-master 751/tcp # Kerberos admin server tcp -+krbupdate 760/tcp kreg # BSD Kerberos registration -+kpasswd 761/tcp kpwd # BSD Kerberos `passwd' -+eklogin 2105/tcp # Kerberos encrypted `rlogin' -+# -+# Unofficial but necessary (for NetBSD) services -+# -+supfilesrv 871/tcp # SUP server -+supfiledbg 1127/tcp # SUP debugging -+# -+# AppleTalk DDP entries (DDP: Datagram Delivery Protocol) -+# -+rtmp 1/ddp # Routing Table Maintenance Protocol -+nbp 2/ddp # Name Binding Protocol -+echo 4/ddp # AppleTalk Echo Protocol -+zip 6/ddp # Zone Information Protocol -+ -diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/shadow linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/shadow ---- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/etc/shadow 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/etc/shadow 2005-12-24 20:29:42.067316648 +0000 -@@ -0,0 +1,11 @@ -+root::10933:0:99999:7::: -+bin:*:10933:0:99999:7::: -+daemon:*:10933:0:99999:7::: -+adm:*:10933:0:99999:7::: -+lp:*:10933:0:99999:7::: -+sync:*:10933:0:99999:7::: -+shutdown:*:10933:0:99999:7::: -+halt:*:10933:0:99999:7::: -+uucp:*:10933:0:99999:7::: -+operator:*:10933:0:99999:7::: -+nobody:*:10933:0:99999:7::: -diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.generic_string linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.generic_string ---- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.generic_string 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.generic_string 2005-12-24 20:29:42.071316040 +0000 -@@ -0,0 +1 @@ -+# module id=string -diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.ieee1394map linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.ieee1394map ---- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.ieee1394map 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.ieee1394map 2005-12-24 20:29:42.071316040 +0000 -@@ -0,0 +1 @@ -+# ieee1394 module match_flags vendor_id model_id specifier_id version -diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.isapnpmap linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.isapnpmap ---- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.isapnpmap 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.isapnpmap 2005-12-24 20:29:42.079314824 +0000 -@@ -0,0 +1 @@ -+# isapnp module cardvendor carddevice driver_data vendor function ... -diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.parportmap linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.parportmap ---- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.parportmap 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.parportmap 2005-12-24 20:29:42.079314824 +0000 -@@ -0,0 +1 @@ -+# module pattern -diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.pcimap linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.pcimap ---- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.pcimap 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.pcimap 2005-12-24 20:29:42.080314672 +0000 -@@ -0,0 +1 @@ -+# pci module vendor device subvendor subdevice class class_mask driver_data -diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.pnpbiosmap linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.pnpbiosmap ---- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.pnpbiosmap 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.pnpbiosmap 2005-12-24 20:29:42.080314672 +0000 -@@ -0,0 +1 @@ -+# module id -diff -urN linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.usbmap linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.usbmap ---- linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.usbmap 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/lib/modules/2.4.25/modules.usbmap 2005-12-24 20:29:42.080314672 +0000 -@@ -0,0 +1 @@ -+# usb module match_flags idVendor idProduct bcdDevice_lo bcdDevice_hi bDeviceClass bDeviceSubClass bDeviceProtocol bInterfaceClass bInterfaceSubClass bInterfaceProtocol driver_info -Binary files linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/sbin/iwconfig and linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/sbin/iwconfig differ -Binary files linux-2.4.32/arch/mips/ar531x/RAMDISK/rootdir/sbin/iwpriv and linux-2.4.32.new/arch/mips/ar531x/RAMDISK/rootdir/sbin/iwpriv differ -diff -urN linux-2.4.32/arch/mips/ar531x/README linux-2.4.32.new/arch/mips/ar531x/README ---- linux-2.4.32/arch/mips/ar531x/README 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32.new/arch/mips/ar531x/README 2005-12-24 20:29:42.101311480 +0000 -@@ -0,0 +1,68 @@ -+Basic information for the AR531X Board Support Package -+ -+This directory contains the "LBSP" -- Linux Board Support Package -- -+for Linux on the Atheros AR531X Wireless System-On-a-Chip. It is intended -+primarily as a building block for wireless products. At this time, the -+AR531X Linux BSP is experimental code, and is actively UNDER CONSTRUCTION. -+ -+Some components that are supported by this LBSP along with a standard 2.4 -+Linux MIPS kernel include -+ R4Kc CPU -+ instruction and data caches -+ SDRAM -+ flash (Macronix, AMD, STS, etc.) -+ 16550 serial port -+ ethernet MACs -+ ethernet PHY or PHY Switch (RealTek, Kendin, Marvell) -+ General-Purpose I/O pins -+ kernel debugging with kgdb -+ -+This LBSP code does NOT include drivers for the wireless components of the -+chip/boards! Drivers for those components may be distributed separately. -+In particular, the MADWiFi project under SourceForge supports (not yet!) -+wireless functions on the AR531X chipset. See -+ http://www.sourceforge.net/projects/madwifi -+ -+Files included in this BSP: -+ae531xlnx.c - Linux-specific portions of the ethernet driver -+ae531xmac.c - OS-independent AR531X ethernet MAC code -+ae531xmac.h - OS-independent AR531X ethernet MAC software definitions -+ae531xreg.h - OS-independent AR531X ethernet MAC hardware definitions -+ar531x.h - OS-independent AR531X system hardware definitions -+ar531xlnx.h - Linux-specific AR531X system definitions and externs -+defconfig-ar531x - Default Linux configuration file -+intr_recv.S - Linux interrupt "glue" code -+ar531xirq.c - Linux Interrupt Request management -+Makefile - Linux makefile -+mvPhy.c - OS-independent ethernet PHY code for Marvell Switch -+mvPhy.h - OS-independent ethernet PHY definitions for Marvell Switch -+ar531xprom.c - Linux prom "glue" code -+ar531xsetup.c - Linux startup code -+ar531xdbg_io.c - Support for kgdb-based debugging and for EARLY_PRINTK_HACK -+ar531xproc.c - Pseudo-device driver for /proc/ar531x device -+ar531xgpio.c - Support for General Purpose I/O pins -+ar531xwmacsl.c - Wireless MAC Support Layer -+ -+Additional files, distributed with the BSP: -+README - This file -+README.BUILD - Instructions for building a linux kernel from source -+README.EXECUTE - Instructions for testing your linux kernel -+README.RAMDISK - Instructions for building a root ramdisk image -+ -+ramdisk.gz - A binary ramdisk image, suitable for use with AR531X. -+DIFFS - Directory that contains "patch" files (See README.BUILD) -+ -+ -+There are several ways to boot a vmlinux image on an AR531X board: -+ -You can boot in over ethernet from the vxWorks bootrom, which is preloaded -+ on all Atheros boards -+ -You can use an ICE (e.g. VisionICE) to load the vmlinux image. You will -+ need appropriate register initialization (e.g. AP30.ini file) -+ -You can use the eCos RedBoot bootrom loader. This is a full-featured -+ bootrom which as been ported to AR531x. It can boot vmlinux over ethernet -+ or from flash. Source code is available from Atheros. -+ -+Please send comments, corrections, complaints, criticisms, suggestions, -+enhancements, requests, or any other reasonable communications regarding -+this effort, to "linux@atheros.com". Your email will be received by a -+couple of engineers, and redirected as appropriate. -diff -urN linux-2.4.32/arch/mips/ar531x/README.BUILD linux-2.4.32.new/arch/mips/ar531x/README.BUILD ---- linux-2.4.32/arch/mips/ar531x/README.BUILD 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32.new/arch/mips/ar531x/README.BUILD 2005-12-24 20:29:42.101311480 +0000 -@@ -0,0 +1,47 @@ -+ How to BUILD a linux kernel for an AR531X system -+ -+It is expected that you will build Linux on an existing Linux system, which -+has all of the standard Linux tools. -+ -+01) Obtain a MIPS BigEndian ELF gcc-compatible toolchain. For example, -+ if you're cross-compiling on a x86 Linux system, you could use: -+ ftp://ftp.mips.com/pub/tools/software/sde-for-linux/sdelinux-5.01-4eb.i386.rpm -+ -+02) Obtain the latest working MIPS Linux kernel -+ cvs -d :pserver:cvs@ftp.linux-mips.org:/home/cvs login (password "cvs") -+ cvs -d :pserver:cvs@ftp.linux-mips.org:/home/cvs co -r linux_2_4 linux -+ -+ Now "cd linux". The remainder of these instructions assume -+ that you are in the linux directory. -+ -+03) Place the contents of this directory at arch/mips/ar531x. -+ -+04) Use the patch command to patch generic linux files according -+ to the DIFFS directory -+ for i in arch/mips/ar531x/DIFFS/*.diff -+ do -+ patch -p1 < $i -+ done -+ NOTE: This version of the AR531X Linux BSP was tested with -+ MIPS Linux 2.4.22 as of 11/14/03. If you use a different -+ (e.g. more recent) version of Linux source, you may need to -+ resolve some minor patch and compilation issues. -+ -+05) Set up a RAMDISK image. -+ See the instructions in README.RAMDISK. -+ -+06) Set up a linux configuration using ar531x/defconfig-ar531x. -+ cp arch/mips/ar531x/defconfig-ar531x .config -+ make oldconfig (answer all questions that are asked) -+ NOTE: For development/debug purposes, you may want to -+ enable CONFIG_RUNTIME_DEBUG and CONFIG_KGDB. -+ -+07) Make dependencies. -+ make dep -+ -+08) Build the linux kernel -+ make -+ -+09) The linux image you just built is in vmlinux. -+ See instructions in README.EXECUTE to run your vmlinux -+ image on an AP531X-based board. -diff -urN linux-2.4.32/arch/mips/ar531x/README.EXECUTE linux-2.4.32.new/arch/mips/ar531x/README.EXECUTE ---- linux-2.4.32/arch/mips/ar531x/README.EXECUTE 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32.new/arch/mips/ar531x/README.EXECUTE 2005-12-24 20:29:42.101311480 +0000 -@@ -0,0 +1,23 @@ -+ How to EXECUTE a linux image on an AR531X system -+ -+There are currently three ways to run you vmlinux image: -+ 1) Load it using the vxWorks bootrom that is supplied with the board. -+ You can load it over ethernet or from the TFFS file system, if you -+ have sufficient flash to store the image. -+ 2) Load it using an ICE (e.g. VisionICE). -+ 3) Use a bootrom loader, such as eCos RedBoot. -+ -+After you have booted linux: -+ By default, the root filesystem on ramdisk is read-only. -+ To make it writable, use "mount -o remount w /". -+ -+ The user-level commands are slightly non-standard, as they -+ are based on "busybox". -+ -+ The "wget" command is included. You can use wget to fetch -+ files from any ftp server. So, for instance, you can fetch -+ a kernel module and then "insmod" it. -+ -+Note that the standard source-level kernel debugger, kgdb, works well -+over the serial line with this port. We use kgdb and the kgdb_demux perl -+script -- available over the www -- for debugging. -diff -urN linux-2.4.32/arch/mips/ar531x/README.VERSION linux-2.4.32.new/arch/mips/ar531x/README.VERSION ---- linux-2.4.32/arch/mips/ar531x/README.VERSION 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32.new/arch/mips/ar531x/README.VERSION 2005-12-24 20:29:42.101311480 +0000 -@@ -0,0 +1 @@ -+Source release last modified: 12/16/03 -diff -urN linux-2.4.32/arch/mips/config-shared.in linux-2.4.32.new/arch/mips/config-shared.in ---- linux-2.4.32/arch/mips/config-shared.in 2005-12-24 16:11:21.000000000 +0000 -+++ linux-2.4.32.new/arch/mips/config-shared.in 2005-12-24 21:33:42.804435856 +0000 -@@ -31,6 +31,7 @@ - dep_bool 'Support for Alchemy PB1000 board' CONFIG_MIPS_PB1000 $CONFIG_MIPS32 - dep_bool 'Support for Alchemy PB1100 board' CONFIG_MIPS_PB1100 $CONFIG_MIPS32 - dep_bool 'Support for Alchemy PB1500 board' CONFIG_MIPS_PB1500 $CONFIG_MIPS32 -+dep_bool 'Support for Atheros AR5312/AR2312 WiSoC (EXPERIMENTAL)' CONFIG_AR531X $CONFIG_AR531X $CONFIG_EXPERIMENTAL - dep_bool 'Support for Alchemy PB1550 board' CONFIG_MIPS_PB1550 $CONFIG_MIPS32 - dep_bool 'Support for Alchemy PB1200 board' CONFIG_MIPS_PB1200 $CONFIG_MIPS32 - dep_bool 'Support for Alchemy Hydrogen3 board' CONFIG_MIPS_HYDROGEN3 $CONFIG_MIPS32 -@@ -196,7 +197,7 @@ - bool ' Support for ZBbus profiling' CONFIG_SIBYTE_TBPROF - - if [ "$CONFIG_SIBYTE_SWARM" = "y" -o \ -- "$CONFIG_SIBYTE_LITTLESUR" = "y" -o \ -+O5B "$CONFIG_SIBYTE_LITTLESUR" = "y" -o \ - "$CONFIG_SIBYTE_PTSWARM" = "y" -o \ - "$CONFIG_SIBYTE_CARMEL" = "y" ]; then - define_bool CONFIG_SIBYTE_GENBUS_IDE y -@@ -239,6 +240,43 @@ - define_bool CONFIG_NONCOHERENT_IO y - define_bool CONFIG_PC_KEYB y - fi -+if [ "$CONFIG_AR531X" = "y" ]; then -+ define_bool CONFIG_IRQ_CPU y -+ define_bool CONFIG_CPU_VR4100 y -+ define_bool CONFIG_SERIAL y -+ define_bool CONFIG_NEW_IRQ y -+ define_bool CONFIG_NEW_TIME_C y -+ define_bool CONFIG_AR5312 -+ define_bool CONFIG_NONCOHERENT_IO y -+ bool 'Enable early printk hack' CONFIG_EARLY_PRINTK_HACK -+ define_bool CONFIG_SCSI n -+ mainmenu_option next_comment -+ comment 'Board selection' -+ choice 'Board type' \ -+ "UNKNOWN CONFIG_APUNKNOWN \ -+ AP30 CONFIG_AP30 \ -+ AP31 CONFIG_AP31 \ -+ AP33 CONFIG_AP33 \ -+ AP38 CONFIG_AP38 \ -+ AP43 CONFIG_AP43 \ -+ AP48 CONFIG_AP48" AP30 -+ if [ "$CONFIG_AP30" = "y" ]; then -+ define_int CONFIG_MTD_PHYSMAP_BUSWIDTH 2 -+ fi -+ if [ "$CONFIG_AP33" = "y" ]; then -+ define_int CONFIG_MTD_PHYSMAP_BUSWIDTH 1 -+ fi -+ if [ "$CONFIG_AP38" = "y" ]; then -+ define_int CONFIG_MTD_PHYSMAP_BUSWIDTH 1 -+ fi -+ if [ "$CONFIG_AP43" = "y" ]; then -+ define_int CONFIG_MTD_PHYSMAP_BUSWIDTH 1 -+ fi -+ if [ "$CONFIG_AP48" = "y" ]; then -+ define_int CONFIG_MTD_PHYSMAP_BUSWIDTH 1 -+ fi -+ endmenu -+fi - if [ "$CONFIG_CASIO_E55" = "y" ]; then - define_bool CONFIG_IRQ_CPU y - define_bool CONFIG_NONCOHERENT_IO y -diff -urN linux-2.4.32/arch/mips/kernel/setup.c linux-2.4.32.new/arch/mips/kernel/setup.c ---- linux-2.4.32/arch/mips/kernel/setup.c 2005-12-24 16:08:53.000000000 +0000 -+++ linux-2.4.32.new/arch/mips/kernel/setup.c 2005-12-24 21:28:51.779678344 +0000 -@@ -494,6 +494,7 @@ - void hp_setup(void); - void au1x00_setup(void); - void frame_info_init(void); -+ void ar531x_setup(void); - - frame_info_init(); - #if defined(CONFIG_BLK_DEV_FD) || defined(CONFIG_BLK_DEV_FD_MODULE) -@@ -691,6 +692,12 @@ - pmc_yosemite_setup(); - break; - #endif -+ -+#ifdef CONFIG_AR531X -+ case MACH_GROUP_AR531X: -+ ar531x_setup(); -+ break; -+#endif - default: - panic("Unsupported architecture"); - } -diff -urN linux-2.4.32/arch/mips/Makefile linux-2.4.32.new/arch/mips/Makefile ---- linux-2.4.32/arch/mips/Makefile 2005-12-24 16:09:51.000000000 +0000 -+++ linux-2.4.32.new/arch/mips/Makefile 2005-12-24 21:28:51.780678192 +0000 -@@ -725,6 +725,12 @@ - LOADADDR += 0x80020000 - endif - -+ifdef CONFIG_AR531X -+SUBDIRS += arch/mips/ar531x -+LIBS += arch/mips/ar531x/ar531x.o -+LOADADDR += 0x80002000 -+endif -+ - # - # Choosing incompatible machines durings configuration will result in - # error messages during linking. Select a default linkscript if -diff -urN linux-2.4.32/drivers/mtd/chips/cfi_cmdset_0002.c linux-2.4.32.new/drivers/mtd/chips/cfi_cmdset_0002.c ---- linux-2.4.32/drivers/mtd/chips/cfi_cmdset_0002.c 2004-11-17 11:54:21.000000000 +0000 -+++ linux-2.4.32.new/drivers/mtd/chips/cfi_cmdset_0002.c 2005-12-24 21:28:51.795675912 +0000 -@@ -510,7 +510,7 @@ - or tells us why it failed. */ - dq6 = CMD(1<<6); - dq5 = CMD(1<<5); -- timeo = jiffies + (HZ/1000); /* setting timeout to 1ms for now */ -+ timeo = jiffies + (HZ/1000) + 1; /* setting timeout to 1ms for now */ - - oldstatus = cfi_read(map, adr); - status = cfi_read(map, adr); -@@ -535,12 +535,14 @@ - if( (status & dq5) == dq5 ) { - /* When DQ5 raises, we must check once again - if DQ6 is toggling. If not, the erase has been -- completed OK. If not, reset chip. */ -+ completed OK. But if so, reset chip. */ - oldstatus = cfi_read(map, adr); - status = cfi_read(map, adr); - - if ( (oldstatus & 0x00FF) == (status & 0x00FF) ) { -+#if 0 - printk(KERN_WARNING "Warning: DQ5 raised while program operation was in progress, however operation completed OK\n" ); -+#endif - } else { - /* DQ5 is active so we can do a reset and stop the erase */ - cfi_write(map, CMD(0xF0), chip->start); -diff -urN linux-2.4.32/drivers/mtd/chips/jedec_probe.c linux-2.4.32.new/drivers/mtd/chips/jedec_probe.c ---- linux-2.4.32/drivers/mtd/chips/jedec_probe.c 2003-06-13 15:51:34.000000000 +0100 -+++ linux-2.4.32.new/drivers/mtd/chips/jedec_probe.c 2005-12-24 21:28:51.797675608 +0000 -@@ -900,7 +900,16 @@ - NumEraseRegions: 1, - regions: {ERASEINFO(0x01000,256), - } -- } -+ }, { -+ mfr_id: MANUFACTURER_SST, -+ dev_id: SST39LF160, -+ name: "SST 39LF160", -+ DevSize: SIZE_2MiB, -+ CmdSet: P_ID_AMD_STD, -+ NumEraseRegions: 1, -+ regions: {ERASEINFO(0x01000,512), -+ } -+ } - }; - - -diff -urN linux-2.4.32/drivers/mtd/Config.in linux-2.4.32.new/drivers/mtd/Config.in ---- linux-2.4.32/drivers/mtd/Config.in 2003-06-13 15:51:34.000000000 +0100 -+++ linux-2.4.32.new/drivers/mtd/Config.in 2005-12-24 21:28:51.803674696 +0000 -@@ -14,6 +14,9 @@ - dep_tristate ' MTD partitioning support' CONFIG_MTD_PARTITIONS $CONFIG_MTD - dep_tristate ' MTD concatenating support' CONFIG_MTD_CONCAT $CONFIG_MTD - dep_tristate ' RedBoot partition table parsing' CONFIG_MTD_REDBOOT_PARTS $CONFIG_MTD_PARTITIONS -+ if [ "$CONFIG_MTD_END_RESERVED" != "" ]; then -+ define_int CONFIG_MTD_END_RESERVED $CONFIG_MTD_END_RESERVED -+ fi - dep_tristate ' Command line partition table parsing' CONFIG_MTD_CMDLINE_PARTS $CONFIG_MTD_PARTITIONS - if [ "$CONFIG_ARM" = "y" ]; then - dep_tristate ' ARM Firmware Suite partition parsing' CONFIG_MTD_AFS_PARTS $CONFIG_MTD_PARTITIONS -diff -urN linux-2.4.32/drivers/mtd/maps/physmap.c linux-2.4.32.new/drivers/mtd/maps/physmap.c ---- linux-2.4.32/drivers/mtd/maps/physmap.c 2003-06-13 15:51:34.000000000 +0100 -+++ linux-2.4.32.new/drivers/mtd/maps/physmap.c 2005-12-24 21:28:51.811673480 +0000 -@@ -80,12 +80,18 @@ - }; - - #ifdef CONFIG_MTD_PARTITIONS --#ifdef CONFIG_MTD_CMDLINE_PARTS -+#if defined(CONFIG_MTD_CMDLINE_PARTS) || defined(CONFIG_MTD_REDBOOT_PARTS) - static struct mtd_partition *mtd_parts = 0; - static int mtd_parts_nb = 0; - #else - static struct mtd_partition physmap_partitions[] = { - /* Put your own partition definitions here */ -+ { -+ name: "rootfs", -+ size: 0x000e0000, -+ offset: 0x000f0000, -+ /* Allow file system to be mounted for writing */ -+ } - #if 0 - { - name: "bootROM", -@@ -138,6 +144,22 @@ - - add_mtd_device(mymtd); - #ifdef CONFIG_MTD_PARTITIONS -+#ifdef CONFIG_MTD_REDBOOT_PARTS -+ { -+ extern int parse_redboot_partitions(struct mtd_info *master, -+ struct mtd_partition **pparts); -+ -+ struct mtd_partition *rb_parts = 0; -+ int rb_parts_nb = 0; -+ -+ rb_parts_nb = parse_redboot_partitions(mymtd, &rb_parts); -+ if (rb_parts_nb > 0) { -+ printk(KERN_NOTICE -+ "Using redboot flash partitioning"); -+ add_mtd_partitions (mymtd, rb_parts, rb_parts_nb); -+ } -+ } -+#endif - #ifdef CONFIG_MTD_CMDLINE_PARTS - mtd_parts_nb = parse_cmdline_partitions(mymtd, &mtd_parts, - "phys"); -@@ -147,7 +169,8 @@ - "Using command line partition definition\n"); - add_mtd_partitions (mymtd, mtd_parts, mtd_parts_nb); - } --#else -+#endif -+#if !defined(CONFIG_MTD_CMDLINE_PARTS) && !defined(CONFIG_MTD_REDBOOT_PARTS) - if (NUM_PARTITIONS != 0) - { - printk(KERN_NOTICE -diff -urN linux-2.4.32/drivers/mtd/redboot.c linux-2.4.32.new/drivers/mtd/redboot.c ---- linux-2.4.32/drivers/mtd/redboot.c 2001-11-09 22:01:22.000000000 +0000 -+++ linux-2.4.32.new/drivers/mtd/redboot.c 2005-12-24 21:28:51.821671960 +0000 -@@ -51,8 +51,14 @@ - return -ENOMEM; - - /* Read the start of the last erase block */ -- ret = master->read(master, master->size - master->erasesize, -+ { -+ u_int32_t part_table_start = master->size - master->erasesize; -+#if defined(CONFIG_MTD_END_RESERVED) -+ part_table_start -= CONFIG_MTD_END_RESERVED; -+#endif -+ ret = master->read(master, part_table_start, - PAGE_SIZE, &retlen, (void *)buf); -+ } - - if (ret) - goto out; -diff -urN linux-2.4.32/drivers/net/Config.in linux-2.4.32.new/drivers/net/Config.in ---- linux-2.4.32/drivers/net/Config.in 2005-12-24 16:16:53.000000000 +0000 -+++ linux-2.4.32.new/drivers/net/Config.in 2005-12-24 21:28:51.856666640 +0000 -@@ -30,6 +30,8 @@ - comment 'Ethernet (10 or 100Mbit)' - bool 'Ethernet (10 or 100Mbit)' CONFIG_NET_ETHERNET - if [ "$CONFIG_NET_ETHERNET" = "y" ]; then -+ define_bool CONFIG_VENETDEV n -+ define_bool CONFIG_MARVELL_ENET_PHY y - if [ "$CONFIG_ARM" = "y" ]; then - dep_bool ' ARM EBSA110 AM79C961A support' CONFIG_ARM_AM79C961A $CONFIG_ARCH_EBSA110 - tristate ' Cirrus Logic CS8900A support' CONFIG_ARM_CIRRUS -diff -urN linux-2.4.32/drivers/net/wireless/Config.in linux-2.4.32.new/drivers/net/wireless/Config.in ---- linux-2.4.32/drivers/net/wireless/Config.in 2004-11-17 11:54:21.000000000 +0000 -+++ linux-2.4.32.new/drivers/net/wireless/Config.in 2005-12-24 21:28:51.898660256 +0000 -@@ -38,7 +38,8 @@ - - # yes, this works even when no drivers are selected - if [ "$CONFIG_ISA" = "y" -o "$CONFIG_PCI" = "y" -o \ -- "$CONFIG_ALL_PPC" = "y" -o "$CONFIG_PCMCIA" != "n" ]; then -+ "$CONFIG_ALL_PPC" = "y" -o "$CONFIG_PCMCIA" != "n" -o \ -+ "$CONFIG_NET_WIRELESS" = "y" ]; then - define_bool CONFIG_NET_WIRELESS y - else - define_bool CONFIG_NET_WIRELESS n -diff -urN linux-2.4.32/include/asm-mips/atheros/ar531xbsp.h linux-2.4.32.new/include/asm-mips/atheros/ar531xbsp.h ---- linux-2.4.32/include/asm-mips/atheros/ar531xbsp.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32.new/include/asm-mips/atheros/ar531xbsp.h 2005-12-24 20:29:06.898663096 +0000 -@@ -0,0 +1,16 @@ -+#ifndef __ASM_ATHEROS_BSP_SUPPORT_H -+#define __ASM_ATHEROS_BSP_SUPPORT_H -+/* -+ * These are definitions and functions provided by the bsp to support the -+ * AR5312 WiSoC running LSDK. For different BSP implementations, different -+ * BSP functions will be needed. -+ */ -+ -+extern unsigned int ar531x_sys_frequency(void); -+ -+#ifdef CONFIG_KGDB -+extern void kgdbInit(void); -+extern int kgdbEnabled(void); -+#endif -+ -+#endif /* __ASM_ATHEROS_BSP_SUPPORT_H */ -diff -urN linux-2.4.32/include/asm-mips/bootinfo.h linux-2.4.32.new/include/asm-mips/bootinfo.h ---- linux-2.4.32/include/asm-mips/bootinfo.h 2005-12-24 16:08:53.000000000 +0000 -+++ linux-2.4.32.new/include/asm-mips/bootinfo.h 2005-12-24 21:28:51.899660104 +0000 -@@ -37,6 +37,7 @@ - #define MACH_GROUP_HP_LJ 20 /* Hewlett Packard LaserJet */ - #define MACH_GROUP_LASAT 21 - #define MACH_GROUP_TITAN 22 /* PMC-Sierra Titan */ -+#define MACH_GROUP_AR531X 23 /* Atheros AR531X */ - - /* - * Valid machtype values for group unknown (low order halfword of mips_machtype) -@@ -201,6 +202,17 @@ - */ - #define MACH_TITAN_YOSEMITE 1 /* PMC-Sierra Yosemite */ - -+/* -+ * Valid machtype for group MACH_GROUP_AR5312 -+ */ -+#define MACH_ATHEROS_UNUSED 0 -+#define MACH_ATHEROS_AP30 1 /* AP30 */ -+#define MACH_ATHEROS_AP33 2 /* AP33 */ -+#define MACH_ATHEROS_AP38 3 /* AP38 */ -+#define MACH_ATHEROS_AP43 4 /* AP43 */ -+#define MACH_ATHEROS_AP48 5 /* AP48 */ -+#define MACH_ATHEROS_PB32 6 /* PB32 */ -+ - #define CL_SIZE (256) - - const char *get_system_type(void); -diff -urN linux-2.4.32/include/asm-mips/serial.h linux-2.4.32.new/include/asm-mips/serial.h ---- linux-2.4.32/include/asm-mips/serial.h 2005-01-19 14:10:12.000000000 +0000 -+++ linux-2.4.32.new/include/asm-mips/serial.h 2005-12-24 21:28:51.901659800 +0000 -@@ -467,6 +467,11 @@ - #define DDB5477_SERIAL_PORT_DEFNS - #endif - -+#if defined(CONFIG_AR531X) -+#undef RS_TABLE_SIZE -+#define RS_TABLE_SIZE 1 -+#endif -+ - #define SERIAL_PORT_DFNS \ - ATLAS_SERIAL_PORT_DEFNS \ - AU1000_SERIAL_PORT_DEFNS \ -diff -urN linux-2.4.32/kernel/printk.c linux-2.4.32.new/kernel/printk.c ---- linux-2.4.32/kernel/printk.c 2004-11-17 11:54:22.000000000 +0000 -+++ linux-2.4.32.new/kernel/printk.c 2005-12-24 21:28:51.929655544 +0000 -@@ -384,6 +384,18 @@ - _call_console_drivers(start_print, end, msg_level); - } - -+#if CONFIG_EARLY_PRINTK_HACK -+void putDebugChar(char byte); -+static void emit_log_char(char c) -+{ -+ if (c == '\n') { -+ putDebugChar('\r'); -+ putDebugChar('\n'); -+ } else { -+ putDebugChar(c); -+ } -+} -+#else - static void emit_log_char(char c) - { - LOG_BUF(log_end) = c; -@@ -395,6 +407,7 @@ - if (logged_chars < LOG_BUF_LEN) - logged_chars++; - } -+#endif - - /* - * This is printk. It can be called from any context. We want it to work. -@@ -700,3 +713,4 @@ - tty->driver.write(tty, 0, msg, strlen(msg)); - return; - } -+ +diff -urN linux-mips/arch/mips/ar531x/ar531xdbg_io.c mips-linux-2.4.25/arch/mips/ar531x/ar531xdbg_io.c +--- linux-mips/arch/mips/ar531x/ar531xdbg_io.c 1970-01-01 01:00:00.000000000 +0100 ++++ mips-linux-2.4.25/arch/mips/ar531x/ar531xdbg_io.c 2005-12-30 17:26:30.606883840 +0000 +@@ -0,0 +1,234 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright MontaVista Software Inc ++ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved. ++ */ ++ ++/* ++ * Basic support for polled character input/output ++ * using the AR531X's serial port. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "ar531xlnx.h" ++ ++#if CONFIG_EARLY_PRINTK_HACK || CONFIG_KGDB ++/* base addr of uart and clock timing */ ++#if CONFIG_AR5315 ++#define BASE AR5315_UART0 ++#else ++#define BASE AR531X_UART0 ++#endif ++ ++/* distance in bytes between two serial registers */ ++#define REG_OFFSET 4 ++ ++/* ++ * 0 - we need to do serial init ++ * 1 - skip serial init ++ */ ++static int serialPortInitialized = 0; ++ ++/* ++ * * the default baud rate *if* we do serial init ++ * */ ++#define BAUD_DEFAULT UART16550_BAUD_9600 ++ ++/* === END OF CONFIG === */ ++ ++#define UART16550_BAUD_2400 2400 ++#define UART16550_BAUD_4800 4800 ++#define UART16550_BAUD_9600 9600 ++#define UART16550_BAUD_19200 19200 ++#define UART16550_BAUD_38400 38400 ++#define UART16550_BAUD_57600 57600 ++#define UART16550_BAUD_115200 115200 ++ ++#define UART16550_PARITY_NONE 0 ++#define UART16550_PARITY_ODD 0x08 ++#define UART16550_PARITY_EVEN 0x18 ++#define UART16550_PARITY_MARK 0x28 ++#define UART16550_PARITY_SPACE 0x38 ++ ++#define UART16550_DATA_5BIT 0x0 ++#define UART16550_DATA_6BIT 0x1 ++#define UART16550_DATA_7BIT 0x2 ++#define UART16550_DATA_8BIT 0x3 ++ ++#define UART16550_STOP_1BIT 0x0 ++#define UART16550_STOP_2BIT 0x4 ++ ++/* register offset */ ++#define OFS_RCV_BUFFER (0*REG_OFFSET) ++#define OFS_TRANS_HOLD (0*REG_OFFSET) ++#define OFS_SEND_BUFFER (0*REG_OFFSET) ++#define OFS_INTR_ENABLE (1*REG_OFFSET) ++#define OFS_INTR_ID (2*REG_OFFSET) ++#define OFS_DATA_FORMAT (3*REG_OFFSET) ++#define OFS_LINE_CONTROL (3*REG_OFFSET) ++#define OFS_MODEM_CONTROL (4*REG_OFFSET) ++#define OFS_RS232_OUTPUT (4*REG_OFFSET) ++#define OFS_LINE_STATUS (5*REG_OFFSET) ++#define OFS_MODEM_STATUS (6*REG_OFFSET) ++#define OFS_RS232_INPUT (6*REG_OFFSET) ++#define OFS_SCRATCH_PAD (7*REG_OFFSET) ++ ++#define OFS_DIVISOR_LSB (0*REG_OFFSET) ++#define OFS_DIVISOR_MSB (1*REG_OFFSET) ++ ++ ++/* memory-mapped read/write of the port */ ++#define UART16550_READ(y) (*((volatile u8*)(BASE + y))) ++#define UART16550_WRITE(y, z) ((*((volatile u8*)(BASE + y))) = z) ++ ++void ++debugPortInit(u32 baud, u8 data, u8 parity, u8 stop) ++{ ++ /* Pull UART out of reset */ ++#if CONFIG_AR5315 ++ sysRegWrite(AR5315_RESET, ++ sysRegRead(AR5315_RESET) & ~(RESET_UART0)); ++#else ++ sysRegWrite(AR531X_RESET, ++ sysRegRead(AR531X_RESET) & ~(AR531X_RESET_UART0)); ++#endif ++ ++ /* disable interrupts */ ++ UART16550_WRITE(OFS_LINE_CONTROL, 0x0); ++ UART16550_WRITE(OFS_INTR_ENABLE, 0); ++ ++ /* set up buad rate */ ++ { ++ u32 divisor; ++#if CONFIG_AR5315 ++ u32 uart_clock_rate = ar531x_apb_frequency(); ++#else ++ u32 uart_clock_rate = ar531x_cpu_frequency() / 4; ++#endif ++ u32 base_baud = uart_clock_rate / 16; ++ ++ /* set DIAB bit */ ++ UART16550_WRITE(OFS_LINE_CONTROL, 0x80); ++ ++ /* set divisor */ ++ divisor = base_baud / baud; ++ UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff); ++ UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00)>>8); ++ ++ /* clear DIAB bit */ ++ UART16550_WRITE(OFS_LINE_CONTROL, 0x0); ++ } ++ ++ /* set data format */ ++ UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop); ++} ++ ++u8 ++getDebugChar(void) ++{ ++ if (!serialPortInitialized) { ++ serialPortInitialized = 1; ++ debugPortInit(BAUD_DEFAULT, ++ UART16550_DATA_8BIT, ++ UART16550_PARITY_NONE, UART16550_STOP_1BIT); ++ } ++ ++ while((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0); ++ return UART16550_READ(OFS_RCV_BUFFER); ++} ++ ++#if CONFIG_KGDB ++/* ++ * Peek at the most recently received character. ++ * Don't wait for a new character to be received. ++ */ ++u8 ++peekDebugChar(void) ++{ ++ return UART16550_READ(OFS_RCV_BUFFER); ++} ++ ++static int kgdbInitialized = 0; ++ ++void ++kgdbInit(void) ++{ ++#if CONFIG_AR5315 ++ sysRegWrite(AR5315_WDC, WDC_IGNORE_EXPIRATION); ++#else ++ sysRegWrite(AR531X_WD_CTRL, AR531X_WD_CTRL_IGNORE_EXPIRATION); ++#endif ++ ++ if (!kgdbInitialized) { ++ printk("Setting debug traps - please connect the remote debugger.\n"); ++ set_debug_traps(); ++ kgdbInitialized = 1; ++ } ++ breakpoint(); ++} ++ ++int ++kgdbEnabled(void) ++{ ++ return kgdbInitialized; ++} ++ ++#define DEBUG_CHAR '\001'; ++ ++int ++kgdbInterrupt(void) ++{ ++ if (!kgdbInitialized) { ++ return 0; ++ } ++ ++ /* ++ * Try to avoid swallowing too much input: Only consume ++ * a character if nothing new has arrived. Yes, there's ++ * still a small hole here, and we may lose an input ++ * character now and then. ++ */ ++ if (UART16550_READ(OFS_LINE_STATUS) & 1) { ++ return 0; ++ } else { ++ return UART16550_READ(OFS_RCV_BUFFER) == DEBUG_CHAR; ++ } ++} ++#endif ++ ++ ++void ++putDebugChar(char byte) ++{ ++ if (!serialPortInitialized) { ++ serialPortInitialized = 1; ++ debugPortInit(BAUD_DEFAULT, ++ UART16550_DATA_8BIT, ++ UART16550_PARITY_NONE, UART16550_STOP_1BIT); ++ } ++ ++ while ((UART16550_READ(OFS_LINE_STATUS) &0x20) == 0); ++ UART16550_WRITE(OFS_SEND_BUFFER, byte); ++ } ++#endif /* CONFIG_EARLY_PRINTK_HACK || CONFIG_KGDB */ +diff -urN linux-mips/arch/mips/ar531x/ar531xgpio.c mips-linux-2.4.25/arch/mips/ar531x/ar531xgpio.c +--- linux-mips/arch/mips/ar531x/ar531xgpio.c 1970-01-01 01:00:00.000000000 +0100 ++++ mips-linux-2.4.25/arch/mips/ar531x/ar531xgpio.c 2005-12-30 17:26:30.606883840 +0000 +@@ -0,0 +1,147 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved. ++ */ ++ ++/* ++ * Support for GPIO -- General Purpose Input/Output Pins ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include "ar531xlnx.h" ++ ++/* GPIO Interrupt Support */ ++ ++/* Turn on the specified AR531X_GPIO_IRQ interrupt */ ++static unsigned int ++ar531x_gpio_intr_startup(unsigned int irq) ++{ ++ ar531x_gpio_intr_enable(irq); ++ return 0; ++} ++ ++/* Turn off the specified AR531X_GPIO_IRQ interrupt */ ++static void ++ar531x_gpio_intr_shutdown(unsigned int irq) ++{ ++ ar531x_gpio_intr_disable(irq); ++} ++ ++u32 gpioIntMask = 0; ++ ++/* Enable the specified AR531X_GPIO_IRQ interrupt */ ++void ++ar531x_gpio_intr_enable(unsigned int irq) ++{ ++ u32 reg; ++ int gpio; ++ ++#ifndef CONFIG_AR5315 ++ gpio = irq - AR531X_GPIO_IRQ_BASE; ++ gpioIntMask |= gpio; ++ ++ reg = sysRegRead(AR531X_GPIO_CR); ++ reg &= ~(GPIO_CR_M(gpio) | GPIO_CR_UART(gpio) | GPIO_CR_INT(gpio)); ++ reg |= GPIO_CR_I(gpio); ++ reg |= GPIO_CR_INT(gpio); ++ ++ sysRegWrite(AR531X_GPIO_CR, reg); ++ (void)sysRegRead(AR531X_GPIO_CR); /* flush to hardware */ ++#endif ++} ++ ++/* Disable the specified AR531X_GPIO_IRQ interrupt */ ++void ++ar531x_gpio_intr_disable(unsigned int irq) ++{ ++ u32 reg; ++ int gpio; ++ ++#ifndef CONFIG_AR5315 ++ gpio = irq - AR531X_GPIO_IRQ_BASE; ++ reg = sysRegRead(AR531X_GPIO_CR); ++ reg &= ~(GPIO_CR_M(gpio) | GPIO_CR_UART(gpio) | GPIO_CR_INT(gpio)); ++ reg |= GPIO_CR_I(gpio); ++ /* No GPIO_CR_INT bit */ ++ ++ sysRegWrite(AR531X_GPIO_CR, reg); ++ (void)sysRegRead(AR531X_GPIO_CR); /* flush to hardware */ ++ ++ gpioIntMask &= ~gpio; ++#endif ++} ++ ++static void ++ar531x_gpio_intr_ack(unsigned int irq) ++{ ++ ar531x_gpio_intr_disable(irq); ++} ++ ++static void ++ar531x_gpio_intr_end(unsigned int irq) ++{ ++ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) ++ ar531x_gpio_intr_enable(irq); ++} ++ ++static void ++ar531x_gpio_intr_set_affinity(unsigned int irq, unsigned long mask) ++{ ++ /* Only 1 CPU; ignore affinity request */ ++} ++ ++int ar531x_gpio_irq_base; ++ ++struct hw_interrupt_type ar531x_gpio_intr_controller = { ++ "AR531X GPIO", ++ ar531x_gpio_intr_startup, ++ ar531x_gpio_intr_shutdown, ++ ar531x_gpio_intr_enable, ++ ar531x_gpio_intr_disable, ++ ar531x_gpio_intr_ack, ++ ar531x_gpio_intr_end, ++ ar531x_gpio_intr_set_affinity, ++}; ++ ++void ++ar531x_gpio_intr_init(int irq_base) ++{ ++ int i; ++ ++ for (i = irq_base; i < irq_base + AR531X_GPIO_IRQ_COUNT; i++) { ++ irq_desc[i].status = IRQ_DISABLED; ++ irq_desc[i].action = NULL; ++ irq_desc[i].depth = 1; ++ irq_desc[i].handler = &ar531x_gpio_intr_controller; ++ } ++ ++ ar531x_gpio_irq_base = irq_base; ++} ++ ++/* ARGSUSED */ ++void ++spurious_gpio_handler(int cpl, void *dev_id, struct pt_regs *regs) ++{ ++ u32 gpioDataIn; ++#if CONFIG_AR5315 ++ gpioDataIn = sysRegRead(AR5315_GPIO_DI) & gpioIntMask; ++#else ++ gpioDataIn = sysRegRead(AR531X_GPIO_DI) & gpioIntMask; ++#endif ++ ++ printk("spurious_gpio_handler: 0x%x di=0x%8.8x gpioIntMask=0x%8.8x\n", ++ cpl, gpioDataIn, gpioIntMask); ++} ++ ++struct irqaction spurious_gpio = ++ {spurious_gpio_handler, SA_INTERRUPT, 0, "spurious_gpio", ++ NULL, NULL}; ++ +diff -urN linux-mips/arch/mips/ar531x/ar531x.h mips-linux-2.4.25/arch/mips/ar531x/ar531x.h +--- linux-mips/arch/mips/ar531x/ar531x.h 1970-01-01 01:00:00.000000000 +0100 ++++ mips-linux-2.4.25/arch/mips/ar531x/ar531x.h 2005-12-30 17:26:30.605883992 +0000 +@@ -0,0 +1,1018 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved. ++ */ ++ ++#ifndef AR531X_H ++#define AR531X_H 1 ++ ++#ifndef CONFIG_AR5315 ++ ++#include ++ ++/* Address Map */ ++#define AR531X_WLAN0 0x18000000 ++#define AR531X_WLAN1 0x18500000 ++#define AR531X_ENET0 0x18100000 ++#define AR531X_ENET1 0x18200000 ++#define AR531X_SDRAMCTL 0x18300000 ++#define AR531X_FLASHCTL 0x18400000 ++#define AR531X_APBBASE 0x1c000000 ++#define AR531X_FLASH 0x1e000000 ++#define AR531X_UART0 0xbc000003 /* UART MMR */ ++ ++/* ++ * AR531X_NUM_ENET_MAC defines the number of ethernet MACs that ++ * should be considered available. The AR5312 supports 2 enet MACS, ++ * even though many reference boards only actually use 1 of them ++ * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch. ++ * The AR2312 supports 1 enet MAC. ++ */ ++#define AR531X_NUM_ENET_MAC 2 ++ ++/* ++ * Need these defines to determine true number of ethernet MACs ++ */ ++#define AR5212_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */ ++#define AR5212_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ ++#define AR5212_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */ ++#define AR531X_RADIO_MASK_OFF 0xc8 ++#define AR531X_RADIO0_MASK 0x0003 ++#define AR531X_RADIO1_MASK 0x000c ++#define AR531X_RADIO1_S 2 ++ ++/* ++ * AR531X_NUM_WMAC defines the number of Wireless MACs that\ ++ * should be considered available. ++ */ ++#define AR531X_NUM_WMAC 2 ++ ++/* Reset/Timer Block Address Map */ ++#define AR531X_RESETTMR (AR531X_APBBASE + 0x3000) ++#define AR531X_TIMER (AR531X_RESETTMR + 0x0000) /* countdown timer */ ++#define AR531X_WD_CTRL (AR531X_RESETTMR + 0x0008) /* watchdog cntrl */ ++#define AR531X_WD_TIMER (AR531X_RESETTMR + 0x000c) /* watchdog timer */ ++#define AR531X_ISR (AR531X_RESETTMR + 0x0010) /* Intr Status Reg */ ++#define AR531X_IMR (AR531X_RESETTMR + 0x0014) /* Intr Mask Reg */ ++#define AR531X_RESET (AR531X_RESETTMR + 0x0020) ++#define AR5312_CLOCKCTL1 (AR531X_RESETTMR + 0x0064) ++#define AR5312_SCRATCH (AR531X_RESETTMR + 0x006c) ++#define AR531X_PROCADDR (AR531X_RESETTMR + 0x0070) ++#define AR531X_PROC1 (AR531X_RESETTMR + 0x0074) ++#define AR531X_DMAADDR (AR531X_RESETTMR + 0x0078) ++#define AR531X_DMA1 (AR531X_RESETTMR + 0x007c) ++#define AR531X_ENABLE (AR531X_RESETTMR + 0x0080) /* interface enb */ ++#define AR531X_REV (AR531X_RESETTMR + 0x0090) /* revision */ ++ ++/* AR531X_WD_CTRL register bit field definitions */ ++#define AR531X_WD_CTRL_IGNORE_EXPIRATION 0x0000 ++#define AR531X_WD_CTRL_NMI 0x0001 ++#define AR531X_WD_CTRL_RESET 0x0002 ++ ++/* AR531X_ISR register bit field definitions */ ++#define AR531X_ISR_NONE 0x0000 ++#define AR531X_ISR_TIMER 0x0001 ++#define AR531X_ISR_AHBPROC 0x0002 ++#define AR531X_ISR_AHBDMA 0x0004 ++#define AR531X_ISR_GPIO 0x0008 ++#define AR531X_ISR_UART0 0x0010 ++#define AR531X_ISR_UART0DMA 0x0020 ++#define AR531X_ISR_WD 0x0040 ++#define AR531X_ISR_LOCAL 0x0080 ++ ++/* AR531X_RESET register bit field definitions */ ++#define AR531X_RESET_SYSTEM 0x00000001 /* cold reset full system */ ++#define AR531X_RESET_PROC 0x00000002 /* cold reset MIPS core */ ++#define AR531X_RESET_WLAN0 0x00000004 /* cold reset WLAN MAC and BB */ ++#define AR531X_RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */ ++#define AR531X_RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */ ++#define AR531X_RESET_ENET0 0x00000020 /* cold reset ENET0 mac */ ++#define AR531X_RESET_ENET1 0x00000040 /* cold reset ENET1 mac */ ++#define AR531X_RESET_UART0 0x00000100 /* cold reset UART0 (high speed) */ ++#define AR531X_RESET_WLAN1 0x00000200 /* cold reset WLAN MAC/BB */ ++#define AR531X_RESET_APB 0x00000400 /* cold reset APB (ar5312) */ ++#define AR531X_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */ ++#define AR531X_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset WLAN0 MAC */ ++#define AR531X_RESET_WARM_WLAN0_BB 0x00004000 /* warm reset WLAN0 BaseBand */ ++#define AR531X_RESET_NMI 0x00010000 /* send an NMI to the processor */ ++#define AR531X_RESET_WARM_WLAN1_MAC 0x00020000 /* warm reset WLAN1 mac */ ++#define AR531X_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 baseband */ ++#define AR531X_RESET_LOCAL_BUS 0x00080000 /* reset local bus */ ++#define AR531X_RESET_WDOG 0x00100000 /* last reset was a watchdog */ ++ ++#define AR531X_RESET_WMAC0_BITS \ ++ AR531X_RESET_WLAN0 |\ ++ AR531X_RESET_WARM_WLAN0_MAC |\ ++ AR531X_RESET_WARM_WLAN0_BB ++ ++#define AR531X_RESERT_WMAC1_BITS \ ++ AR531X_RESET_WLAN1 |\ ++ AR531X_RESET_WARM_WLAN1_MAC |\ ++ AR531X_RESET_WARM_WLAN1_BB ++ ++/* AR5312_CLOCKCTL1 register bit field definitions */ ++#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030 ++#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4 ++#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00 ++#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8 ++#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000 ++ ++/* Valid for AR5312 and AR2312 */ ++#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030 ++#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4 ++#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00 ++#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8 ++#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000 ++ ++/* Valid for AR2313 */ ++#define AR2313_CLOCKCTL1_PREDIVIDE_MASK 0x00003000 ++#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT 12 ++#define AR2313_CLOCKCTL1_MULTIPLIER_MASK 0x001f0000 ++#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT 16 ++#define AR2313_CLOCKCTL1_DOUBLER_MASK 0x00000000 ++ ++ ++/* AR531X_ENABLE register bit field definitions */ ++#define AR531X_ENABLE_WLAN0 0x0001 ++#define AR531X_ENABLE_ENET0 0x0002 ++#define AR531X_ENABLE_ENET1 0x0004 ++#define AR531X_ENABLE_UART_AND_WLAN1_PIO 0x0008 /* UART, and WLAN1 PIOs */ ++#define AR531X_ENABLE_WLAN1_DMA 0x0010 /* WLAN1 DMAs */ ++#define AR531X_ENABLE_WLAN1 \ ++ (AR531X_ENABLE_UART_AND_WLAN1_PIO | AR531X_ENABLE_WLAN1_DMA) ++ ++/* AR531X_REV register bit field definitions */ ++#define AR531X_REV_WMAC_MAJ 0xf000 ++#define AR531X_REV_WMAC_MAJ_S 12 ++#define AR531X_REV_WMAC_MIN 0x0f00 ++#define AR531X_REV_WMAC_MIN_S 8 ++#define AR531X_REV_MAJ 0x00f0 ++#define AR531X_REV_MAJ_S 4 ++#define AR531X_REV_MIN 0x000f ++#define AR531X_REV_MIN_S 0 ++#define AR531X_REV_CHIP (REV_MAJ|REV_MIN) ++ ++/* Major revision numbers, bits 7..4 of Revision ID register */ ++#define AR531X_REV_MAJ_AR5312 0x4 ++#define AR531X_REV_MAJ_AR2313 0x5 ++ ++/* Minor revision numbers, bits 3..0 of Revision ID register */ ++#define AR5312_REV_MIN_DUAL 0x0 /* Dual WLAN version */ ++#define AR5312_REV_MIN_SINGLE 0x1 /* Single WLAN version */ ++ ++/* AR531X_FLASHCTL register bit field definitions */ ++#define FLASHCTL_IDCY 0x0000000f /* Idle cycle turn around time */ ++#define FLASHCTL_IDCY_S 0 ++#define FLASHCTL_WST1 0x000003e0 /* Wait state 1 */ ++#define FLASHCTL_WST1_S 5 ++#define FLASHCTL_RBLE 0x00000400 /* Read byte lane enable */ ++#define FLASHCTL_WST2 0x0000f800 /* Wait state 2 */ ++#define FLASHCTL_WST2_S 11 ++#define FLASHCTL_AC 0x00070000 /* Flash address check (added) */ ++#define FLASHCTL_AC_S 16 ++#define FLASHCTL_AC_128K 0x00000000 ++#define FLASHCTL_AC_256K 0x00010000 ++#define FLASHCTL_AC_512K 0x00020000 ++#define FLASHCTL_AC_1M 0x00030000 ++#define FLASHCTL_AC_2M 0x00040000 ++#define FLASHCTL_AC_4M 0x00050000 ++#define FLASHCTL_AC_8M 0x00060000 ++#define FLASHCTL_AC_RES 0x00070000 /* 16MB is not supported */ ++#define FLASHCTL_E 0x00080000 /* Flash bank enable (added) */ ++#define FLASHCTL_BUSERR 0x01000000 /* Bus transfer error status flag */ ++#define FLASHCTL_WPERR 0x02000000 /* Write protect error status flag */ ++#define FLASHCTL_WP 0x04000000 /* Write protect */ ++#define FLASHCTL_BM 0x08000000 /* Burst mode */ ++#define FLASHCTL_MW 0x30000000 /* Memory width */ ++#define FLASHCTL_MWx8 0x00000000 /* Memory width x8 */ ++#define FLASHCTL_MWx16 0x10000000 /* Memory width x16 */ ++#define FLASHCTL_MWx32 0x20000000 /* Memory width x32 (not supported) */ ++#define FLASHCTL_ATNR 0x00000000 /* Access type == no retry */ ++#define FLASHCTL_ATR 0x80000000 /* Access type == retry every */ ++#define FLASHCTL_ATR4 0xc0000000 /* Access type == retry every 4 */ ++ ++/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices. */ ++#define AR531X_FLASHCTL0 (AR531X_FLASHCTL + 0x00) ++#define AR531X_FLASHCTL1 (AR531X_FLASHCTL + 0x04) ++#define AR531X_FLASHCTL2 (AR531X_FLASHCTL + 0x08) ++ ++/* ARM SDRAM Controller -- just enough to determine memory size */ ++#define AR531X_MEM_CFG1 (AR531X_SDRAMCTL + 0x04) ++#define MEM_CFG1_AC0 0x00000700 /* bank 0: SDRAM addr check (added) */ ++#define MEM_CFG1_AC0_S 8 ++#define MEM_CFG1_AC1 0x00007000 /* bank 1: SDRAM addr check (added) */ ++#define MEM_CFG1_AC1_S 12 ++ ++/* GPIO Address Map */ ++#define AR531X_GPIO (AR531X_APBBASE + 0x2000) ++#define AR531X_GPIO_DO (AR531X_GPIO + 0x00) /* output register */ ++#define AR531X_GPIO_DI (AR531X_GPIO + 0x04) /* intput register */ ++#define AR531X_GPIO_CR (AR531X_GPIO + 0x08) /* control register */ ++ ++/* GPIO Control Register bit field definitions */ ++#define GPIO_CR_M(x) (1 << (x)) /* mask for i/o */ ++#define GPIO_CR_O(x) (0 << (x)) /* mask for output */ ++#define GPIO_CR_I(x) (1 << (x)) /* mask for input */ ++#define GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt */ ++#define GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */ ++ ++ ++typedef unsigned int AR531X_REG; ++ ++#define sysRegRead(phys) \ ++ (*(volatile AR531X_REG *)PHYS_TO_K1(phys)) ++ ++#define sysRegWrite(phys, val) \ ++ ((*(volatile AR531X_REG *)PHYS_TO_K1(phys)) = (val)) ++ ++ ++/* ++ * This is board-specific data that is stored in a "fixed" location in flash. ++ * It is shared across operating systems, so it should not be changed lightly. ++ * The main reason we need it is in order to extract the ethernet MAC ++ * address(es). ++ */ ++struct ar531x_boarddata { ++ u32 magic; /* board data is valid */ ++#define AR531X_BD_MAGIC 0x35333131 /* "5311", for all 531x platforms */ ++ u16 cksum; /* checksum (starting with BD_REV 2) */ ++ u16 rev; /* revision of this struct */ ++#define BD_REV 4 ++ char boardName[64]; /* Name of board */ ++ u16 major; /* Board major number */ ++ u16 minor; /* Board minor number */ ++ u32 config; /* Board configuration */ ++#define BD_ENET0 0x00000001 /* ENET0 is stuffed */ ++#define BD_ENET1 0x00000002 /* ENET1 is stuffed */ ++#define BD_UART1 0x00000004 /* UART1 is stuffed */ ++#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */ ++#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */ ++#define BD_SYSLED 0x00000020 /* System LED stuffed */ ++#define BD_EXTUARTCLK 0x00000040 /* External UART clock */ ++#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */ ++#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */ ++#define BD_WLAN0 0x00000200 /* Enable WLAN0 */ ++#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ memCap for testing */ ++#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */ ++#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */ ++#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */ ++#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */ ++#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */ ++#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */ ++#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */ ++ u16 resetConfigGpio; /* Reset factory GPIO pin */ ++ u16 sysLedGpio; /* System LED GPIO pin */ ++ ++ u32 cpuFreq; /* CPU core frequency in Hz */ ++ u32 sysFreq; /* System frequency in Hz */ ++ u32 cntFreq; /* Calculated C0_COUNT frequency */ ++ ++ u8 wlan0Mac[6]; ++ u8 enet0Mac[6]; ++ u8 enet1Mac[6]; ++ ++ u16 pciId; /* Pseudo PCIID for common code */ ++ u16 memCap; /* cap bank1 in MB */ ++ ++ /* version 3 */ ++ u8 wlan1Mac[6]; /* (ar5212) */ ++}; ++ ++#else ++ ++/* ++ * Address map ++ */ ++#define AR5315_SDRAM0 0x00000000 /* DRAM */ ++#define AR5315_SPI_READ 0x08000000 /* SPI FLASH */ ++#define AR5315_WLAN0 0xB0000000 /* Wireless MMR */ ++#define AR5315_PCI 0xB0100000 /* PCI MMR */ ++#define AR5315_SDRAMCTL 0xB0300000 /* SDRAM MMR */ ++#define AR5315_LOCAL 0xB0400000 /* LOCAL BUS MMR */ ++#define AR5315_ENET0 0xB0500000 /* ETHERNET MMR */ ++#define AR5315_DSLBASE 0xB1000000 /* RESET CONTROL MMR */ ++#define AR5315_UART0 0xB1100003 /* UART MMR */ ++#define AR5315_SPI 0xB1300000 /* SPI FLASH MMR */ ++#define AR5315_FLASHBT 0xBfc00000 /* ro boot alias to FLASH */ ++#define AR5315_RAM1 0x40000000 /* ram alias */ ++#define AR5315_PCIEXT 0x80000000 /* pci external */ ++#define AR5315_RAM2 0xc0000000 /* ram alias */ ++#define AR5315_RAM3 0xe0000000 /* ram alias */ ++ ++/* ++ * Reset Register ++ */ ++#define AR5315_COLD_RESET (AR5315_DSLBASE + 0x0000) ++ ++/* Cold Reset */ ++#define RESET_COLD_AHB 0x00000001 ++#define RESET_COLD_APB 0x00000002 ++#define RESET_COLD_CPU 0x00000004 ++#define RESET_COLD_CPUWARM 0x00000008 ++#define RESET_SYSTEM (RESET_COLD_CPU | RESET_COLD_APB | RESET_COLD_AHB) /* full system */ ++ ++/* Warm Reset */ ++ ++#define AR5315_RESET (AR5315_DSLBASE + 0x0004) ++ ++#define RESET_WARM_WLAN0_MAC 0x00000001 /* warm reset WLAN0 MAC */ ++#define RESET_WARM_WLAN0_BB 0x00000002 /* warm reset WLAN0 BaseBand */ ++#define RESET_MPEGTS_RSVD 0x00000004 /* warm reset MPEG-TS */ ++#define RESET_PCIDMA 0x00000008 /* warm reset PCI ahb/dma */ ++#define RESET_MEMCTL 0x00000010 /* warm reset memory controller */ ++#define RESET_LOCAL 0x00000020 /* warm reset local bus */ ++#define RESET_I2C_RSVD 0x00000040 /* warm reset I2C bus */ ++#define RESET_SPI 0x00000080 /* warm reset SPI interface */ ++#define RESET_UART0 0x00000100 /* warm reset UART0 */ ++#define RESET_IR_RSVD 0x00000200 /* warm reset IR interface */ ++#define RESET_EPHY0 0x00000400 /* cold reset ENET0 phy */ ++#define RESET_ENET0 0x00000800 /* cold reset ENET0 mac */ ++ ++/* ++ * AHB master arbitration control ++ */ ++#define AR5315_AHB_ARB_CTL (AR5315_DSLBASE + 0x0008) ++ ++#define ARB_CPU 0x00000001 /* CPU, default */ ++#define ARB_WLAN 0x00000002 /* WLAN */ ++#define ARB_MPEGTS_RSVD 0x00000004 /* MPEG-TS */ ++#define ARB_LOCAL 0x00000008 /* LOCAL */ ++#define ARB_PCI 0x00000010 /* PCI */ ++#define ARB_ETHERNET 0x00000020 /* Ethernet */ ++#define ARB_RETRY 0x00000100 /* retry policy, debug only */ ++ ++/* ++ * Config Register ++ */ ++#define AR5315_ENDIAN_CTL (AR5315_DSLBASE + 0x000c) ++ ++#define CONFIG_AHB 0x00000001 /* EC - AHB bridge endianess */ ++#define CONFIG_WLAN 0x00000002 /* WLAN byteswap */ ++#define CONFIG_MPEGTS_RSVD 0x00000004 /* MPEG-TS byteswap */ ++#define CONFIG_PCI 0x00000008 /* PCI byteswap */ ++#define CONFIG_MEMCTL 0x00000010 /* Memory controller endianess */ ++#define CONFIG_LOCAL 0x00000020 /* Local bus byteswap */ ++#define CONFIG_ETHERNET 0x00000040 /* Ethernet byteswap */ ++ ++#define CONFIG_MERGE 0x00000200 /* CPU write buffer merge */ ++#define CONFIG_CPU 0x00000400 /* CPU big endian */ ++#define CONFIG_PCIAHB 0x00000800 ++#define CONFIG_PCIAHB_BRIDGE 0x00001000 ++#define CONFIG_SPI 0x00008000 /* SPI byteswap */ ++#define CONFIG_CPU_DRAM 0x00010000 ++#define CONFIG_CPU_PCI 0x00020000 ++#define CONFIG_CPU_MMR 0x00040000 ++#define CONFIG_BIG 0x00000400 ++ ++ ++/* ++ * NMI control ++ */ ++#define AR5315_NMI_CTL (AR5315_DSLBASE + 0x0010) ++ ++#define NMI_EN 1 ++ ++/* ++ * Revision Register - Initial value is 0x3010 (WMAC 3.0, AR531X 1.0). ++ */ ++#define AR5315_SREV (AR5315_DSLBASE + 0x0014) ++ ++#define REV_MAJ 0x00f0 ++#define REV_MAJ_S 4 ++#define REV_MIN 0x000f ++#define REV_MIN_S 0 ++#define REV_CHIP (REV_MAJ|REV_MIN) ++ ++/* ++ * Interface Enable ++ */ ++#define AR5315_IF_CTL (AR5315_DSLBASE + 0x0018) ++ ++#define IF_MASK 0x00000007 ++#define IF_DISABLED 0 ++#define IF_PCI 1 ++#define IF_TS_LOCAL 2 ++#define IF_ALL 3 /* only for emulation with separate pins */ ++#define IF_LOCAL_HOST 0x00000008 ++#define IF_PCI_HOST 0x00000010 ++#define IF_PCI_INTR 0x00000020 ++#define IF_PCI_CLK_MASK 0x00030000 ++#define IF_PCI_CLK_INPUT 0 ++#define IF_PCI_CLK_OUTPUT_LOW 1 ++#define IF_PCI_CLK_OUTPUT_CLK 2 ++#define IF_PCI_CLK_OUTPUT_HIGH 3 ++#define IF_PCI_CLK_SHIFT 16 ++ ++ ++/* Major revision numbers, bits 7..4 of Revision ID register */ ++#define REV_MAJ_AR5311 0x01 ++#define REV_MAJ_AR5312 0x04 ++#define REV_MAJ_AR5315 0x0B ++ ++/* ++ * APB Interrupt control ++ */ ++ ++#define AR5315_ISR (AR5315_DSLBASE + 0x0020) ++#define AR5315_IMR (AR5315_DSLBASE + 0x0024) ++#define AR5315_GISR (AR5315_DSLBASE + 0x0028) ++ ++#define ISR_UART0 0x0001 /* high speed UART */ ++#define ISR_I2C_RSVD 0x0002 /* I2C bus */ ++#define ISR_SPI 0x0004 /* SPI bus */ ++#define ISR_AHB 0x0008 /* AHB error */ ++#define ISR_APB 0x0010 /* APB error */ ++#define ISR_TIMER 0x0020 /* timer */ ++#define ISR_GPIO 0x0040 /* GPIO */ ++#define ISR_WD 0x0080 /* watchdog */ ++#define ISR_IR_RSVD 0x0100 /* IR */ ++ ++#define IMR_UART0 ISR_UART0 ++#define IMR_I2C_RSVD ISR_I2C_RSVD ++#define IMR_SPI ISR_SPI ++#define IMR_AHB ISR_AHB ++#define IMR_APB ISR_APB ++#define IMR_TIMER ISR_TIMER ++#define IMR_GPIO ISR_GPIO ++#define IMR_WD ISR_WD ++#define IMR_IR_RSVD ISR_IR_RSVD ++ ++#define GISR_MISC 0x0001 ++#define GISR_WLAN0 0x0002 ++#define GISR_MPEGTS_RSVD 0x0004 ++#define GISR_LOCALPCI 0x0008 ++#define GISR_WMACPOLL 0x0010 ++#define GISR_TIMER 0x0020 ++#define GISR_ETHERNET 0x0040 ++ ++/* ++ * Interrupt routing from IO to the processor IP bits ++ * Define our inter mask and level ++ */ ++#define AR5315_INTR_MISCIO SR_IBIT3 ++#define AR5315_INTR_WLAN0 SR_IBIT4 ++#define AR5315_INTR_ENET0 SR_IBIT5 ++#define AR5315_INTR_LOCALPCI SR_IBIT6 ++#define AR5315_INTR_WMACPOLL SR_IBIT7 ++#define AR5315_INTR_COMPARE SR_IBIT8 ++ ++/* ++ * Timers ++ */ ++#define AR5315_TIMER (AR5315_DSLBASE + 0x0030) ++#define AR5315_RELOAD (AR5315_DSLBASE + 0x0034) ++#define AR5315_WD (AR5315_DSLBASE + 0x0038) ++#define AR5315_WDC (AR5315_DSLBASE + 0x003c) ++ ++#define WDC_RESET 0x00000002 /* reset on watchdog */ ++#define WDC_NMI 0x00000001 /* NMI on watchdog */ ++#define WDC_IGNORE_EXPIRATION 0x00000000 ++ ++/* ++ * Interface Debug ++ */ ++#define AR531X_FLASHDBG (AR531X_RESETTMR + 0x0040) ++#define AR531X_MIIDBG (AR531X_RESETTMR + 0x0044) ++ ++ ++/* ++ * CPU Performance Counters ++ */ ++#define AR5315_PERFCNT0 (AR5315_DSLBASE + 0x0048) ++#define AR5315_PERFCNT1 (AR5315_DSLBASE + 0x004c) ++ ++#define PERF_DATAHIT 0x0001 /* Count Data Cache Hits */ ++#define PERF_DATAMISS 0x0002 /* Count Data Cache Misses */ ++#define PERF_INSTHIT 0x0004 /* Count Instruction Cache Hits */ ++#define PERF_INSTMISS 0x0008 /* Count Instruction Cache Misses */ ++#define PERF_ACTIVE 0x0010 /* Count Active Processor Cycles */ ++#define PERF_WBHIT 0x0020 /* Count CPU Write Buffer Hits */ ++#define PERF_WBMISS 0x0040 /* Count CPU Write Buffer Misses */ ++ ++#define PERF_EB_ARDY 0x0001 /* Count EB_ARdy signal */ ++#define PERF_EB_AVALID 0x0002 /* Count EB_AValid signal */ ++#define PERF_EB_WDRDY 0x0004 /* Count EB_WDRdy signal */ ++#define PERF_EB_RDVAL 0x0008 /* Count EB_RdVal signal */ ++#define PERF_VRADDR 0x0010 /* Count valid read address cycles */ ++#define PERF_VWADDR 0x0020 /* Count valid write address cycles */ ++#define PERF_VWDATA 0x0040 /* Count valid write data cycles */ ++ ++/* ++ * AHB Error Reporting. ++ */ ++#define AR5315_AHB_ERR0 (AR5315_DSLBASE + 0x0050) /* error */ ++#define AR5315_AHB_ERR1 (AR5315_DSLBASE + 0x0054) /* haddr */ ++#define AR5315_AHB_ERR2 (AR5315_DSLBASE + 0x0058) /* hwdata */ ++#define AR5315_AHB_ERR3 (AR5315_DSLBASE + 0x005c) /* hrdata */ ++#define AR5315_AHB_ERR4 (AR5315_DSLBASE + 0x0060) /* status */ ++ ++#define AHB_ERROR_DET 1 /* AHB Error has been detected, */ ++ /* write 1 to clear all bits in ERR0 */ ++#define AHB_ERROR_OVR 2 /* AHB Error overflow has been detected */ ++#define AHB_ERROR_WDT 4 /* AHB Error due to wdt instead of hresp */ ++ ++#define PROCERR_HMAST 0x0000000f ++#define PROCERR_HMAST_DFLT 0 ++#define PROCERR_HMAST_WMAC 1 ++#define PROCERR_HMAST_ENET 2 ++#define PROCERR_HMAST_PCIENDPT 3 ++#define PROCERR_HMAST_LOCAL 4 ++#define PROCERR_HMAST_CPU 5 ++#define PROCERR_HMAST_PCITGT 6 ++ ++#define PROCERR_HMAST_S 0 ++#define PROCERR_HWRITE 0x00000010 ++#define PROCERR_HSIZE 0x00000060 ++#define PROCERR_HSIZE_S 5 ++#define PROCERR_HTRANS 0x00000180 ++#define PROCERR_HTRANS_S 7 ++#define PROCERR_HBURST 0x00000e00 ++#define PROCERR_HBURST_S 9 ++ ++ ++ ++/* ++ * Clock Control ++ */ ++#define AR5315_PLLC_CTL (AR5315_DSLBASE + 0x0064) ++#define AR5315_PLLV_CTL (AR5315_DSLBASE + 0x0068) ++#define AR5315_CPUCLK (AR5315_DSLBASE + 0x006c) ++#define AR5315_AMBACLK (AR5315_DSLBASE + 0x0070) ++#define AR5315_SYNCCLK (AR5315_DSLBASE + 0x0074) ++#define AR5315_DSL_SLEEP_CTL (AR5315_DSLBASE + 0x0080) ++#define AR5315_DSL_SLEEP_DUR (AR5315_DSLBASE + 0x0084) ++ ++/* PLLc Control fields */ ++#define PLLC_REF_DIV_M 0x00000003 ++#define PLLC_REF_DIV_S 0 ++#define PLLC_FDBACK_DIV_M 0x0000007C ++#define PLLC_FDBACK_DIV_S 2 ++#define PLLC_ADD_FDBACK_DIV_M 0x00000080 ++#define PLLC_ADD_FDBACK_DIV_S 7 ++#define PLLC_CLKC_DIV_M 0x0001c000 ++#define PLLC_CLKC_DIV_S 14 ++#define PLLC_CLKM_DIV_M 0x00700000 ++#define PLLC_CLKM_DIV_S 20 ++ ++/* CPU CLK Control fields */ ++#define CPUCLK_CLK_SEL_M 0x00000003 ++#define CPUCLK_CLK_SEL_S 0 ++#define CPUCLK_CLK_DIV_M 0x0000000c ++#define CPUCLK_CLK_DIV_S 2 ++ ++/* AMBA CLK Control fields */ ++#define AMBACLK_CLK_SEL_M 0x00000003 ++#define AMBACLK_CLK_SEL_S 0 ++#define AMBACLK_CLK_DIV_M 0x0000000c ++#define AMBACLK_CLK_DIV_S 2 ++ ++#if defined(COBRA_EMUL) ++#define AR5315_AMBA_CLOCK_RATE 20000000 ++#define AR5315_CPU_CLOCK_RATE 40000000 ++#else ++#if defined(DEFAULT_PLL) ++#define AR5315_AMBA_CLOCK_RATE 40000000 ++#define AR5315_CPU_CLOCK_RATE 40000000 ++#else ++#define AR5315_AMBA_CLOCK_RATE 92000000 ++#define AR5315_CPU_CLOCK_RATE 184000000 ++#endif /* ! DEFAULT_PLL */ ++#endif /* ! COBRA_EMUL */ ++ ++#define AR5315_UART_CLOCK_RATE AR5315_AMBA_CLOCK_RATE ++#define AR5315_SDRAM_CLOCK_RATE AR5315_AMBA_CLOCK_RATE ++ ++/* ++ * The UART computes baud rate as: ++ * baud = clock / (16 * divisor) ++ * where divisor is specified as a High Byte (DLM) and a Low Byte (DLL). ++ */ ++#define DESIRED_BAUD_RATE 38400 ++ ++/* ++ * The WATCHDOG value is computed as ++ * 10 seconds * AR531X_WATCHDOG_CLOCK_RATE ++ */ ++#define DESIRED_WATCHDOG_SECONDS 10 ++#define AR531X_WATCHDOG_TIME \ ++ (DESIRED_WATCHDOG_SECONDS * AR531X_WATCHDOG_CLOCK_RATE) ++ ++ ++#define CLOCKCTL_UART0 0x0010 /* enable UART0 external clock */ ++ ++ ++ /* ++ * Applicable "PCICFG" bits for WLAN(s). Assoc status and LED mode. ++ */ ++#define AR531X_PCICFG (AR531X_RESETTMR + 0x00b0) ++#define ASSOC_STATUS_M 0x00000003 ++#define ASSOC_STATUS_NONE 0 ++#define ASSOC_STATUS_PENDING 1 ++#define ASSOC_STATUS_ASSOCIATED 2 ++#define LED_MODE_M 0x0000001c ++#define LED_BLINK_THRESHOLD_M 0x000000e0 ++#define LED_SLOW_BLINK_MODE 0x00000100 ++ ++/* ++ * GPIO ++ */ ++ ++#define AR5315_GPIO_DI (AR5315_DSLBASE + 0x0088) ++#define AR5315_GPIO_DO (AR5315_DSLBASE + 0x0090) ++#define AR5315_GPIO_CR (AR5315_DSLBASE + 0x0098) ++#define AR5315_GPIO_INT (AR5315_DSLBASE + 0x00a0) ++ ++#define GPIO_CR_M(x) (1 << (x)) /* mask for i/o */ ++#define GPIO_CR_O(x) (1 << (x)) /* output */ ++#define GPIO_CR_I(x) (0 << (x)) /* input */ ++ ++#define GPIO_INT(x,Y) ((x) << (8 * (Y))) /* interrupt enable */ ++#define GPIO_INT_M(Y) ((0x3F) << (8 * (Y))) /* mask for int */ ++#define GPIO_INT_LVL(x,Y) ((x) << (8 * (Y) + 6)) /* interrupt level */ ++#define GPIO_INT_LVL_M(Y) ((0x3) << (8 * (Y) + 6)) /* mask for int level */ ++ ++#define AR5315_RESET_GPIO 5 ++#define AR5315_NUM_GPIO 22 ++ ++ ++/* ++ * PCI Clock Control ++ */ ++ ++#define AR5315_PCICLK (AR5315_DSLBASE + 0x00a4) ++ ++#define PCICLK_INPUT_M 0x3 ++#define PCICLK_INPUT_S 0 ++ ++#define PCICLK_PLLC_CLKM 0 ++#define PCICLK_PLLC_CLKM1 1 ++#define PCICLK_PLLC_CLKC 2 ++#define PCICLK_REF_CLK 3 ++ ++#define PCICLK_DIV_M 0xc ++#define PCICLK_DIV_S 2 ++ ++#define PCICLK_IN_FREQ 0 ++#define PCICLK_IN_FREQ_DIV_6 1 ++#define PCICLK_IN_FREQ_DIV_8 2 ++#define PCICLK_IN_FREQ_DIV_10 3 ++ ++/* ++ * Observation Control Register ++ */ ++#define AR5315_OCR (AR5315_DSLBASE + 0x00b0) ++#define OCR_GPIO0_IRIN 0x0040 ++#define OCR_GPIO1_IROUT 0x0080 ++#define OCR_GPIO3_RXCLR 0x0200 ++ ++/* ++ * General Clock Control ++ */ ++ ++#define AR5315_MISCCLK (AR5315_DSLBASE + 0x00b4) ++#define MISCCLK_PLLBYPASS_EN 0x00000001 ++#define MISCCLK_PROCREFCLK 0x00000002 ++ ++/* ++ * SDRAM Controller ++ * - No read or write buffers are included. ++ */ ++#define AR5315_MEM_CFG (AR5315_SDRAMCTL + 0x00) ++#define AR5315_MEM_CTRL (AR5315_SDRAMCTL + 0x0c) ++#define AR5315_MEM_REF (AR5315_SDRAMCTL + 0x10) ++ ++#define SDRAM_DATA_WIDTH_M 0x00006000 ++#define SDRAM_DATA_WIDTH_S 13 ++ ++#define SDRAM_COL_WIDTH_M 0x00001E00 ++#define SDRAM_COL_WIDTH_S 9 ++ ++#define SDRAM_ROW_WIDTH_M 0x000001E0 ++#define SDRAM_ROW_WIDTH_S 5 ++ ++#define SDRAM_BANKADDR_BITS_M 0x00000018 ++#define SDRAM_BANKADDR_BITS_S 3 ++ ++ ++/* ++ * SDRAM Memory Refresh (MEM_REF) value is computed as: ++ * MEMCTL_SREFR = (Tr * hclk_freq) / R ++ * where Tr is max. time of refresh of any single row ++ * R is number of rows in the DRAM ++ * For most 133MHz SDRAM parts, Tr=64ms, R=4096 or 8192 ++ */ ++#if defined(COBRA_EMUL) ++#define AR5315_SDRAM_MEMORY_REFRESH_VALUE 0x96 ++#else ++#if defined(DEFAULT_PLL) ++#define AR5315_SDRAM_MEMORY_REFRESH_VALUE 0x200 ++#else ++#define AR5315_SDRAM_MEMORY_REFRESH_VALUE 0x61a ++#endif /* ! DEFAULT_PLL */ ++#endif ++ ++#if defined(AR5315) ++ ++#define AR5315_SDRAM_DDR_SDRAM 0 /* Not DDR SDRAM */ ++#define AR5315_SDRAM_DATA_WIDTH 16 /* bits */ ++#define AR5315_SDRAM_COL_WIDTH 8 ++#define AR5315_SDRAM_ROW_WIDTH 12 ++ ++#else ++ ++#define AR5315_SDRAM_DDR_SDRAM 0 /* Not DDR SDRAM */ ++#define AR5315_SDRAM_DATA_WIDTH 16 ++#define AR5315_SDRAM_COL_WIDTH 8 ++#define AR5315_SDRAM_ROW_WIDTH 12 ++ ++#endif /* ! AR5315 */ ++ ++/* ++ * SPI Flash Interface Registers ++ */ ++ ++#define AR5315_SPI_CTL (AR5315_SPI + 0x00) ++#define AR5315_SPI_OPCODE (AR5315_SPI + 0x04) ++#define AR5315_SPI_DATA (AR5315_SPI + 0x08) ++ ++#define SPI_CTL_START 0x00000100 ++#define SPI_CTL_BUSY 0x00010000 ++#define SPI_CTL_TXCNT_MASK 0x0000000f ++#define SPI_CTL_RXCNT_MASK 0x000000f0 ++#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff ++#define SPI_CTL_SIZE_MASK 0x00060000 ++ ++#define SPI_CTL_CLK_SEL_MASK 0x03000000 ++#define SPI_OPCODE_MASK 0x000000ff ++ ++/* ++ * PCI-MAC Configuration registers ++ */ ++#define PCI_MAC_RC (AR5315_PCI + 0x4000) ++#define PCI_MAC_SCR (AR5315_PCI + 0x4004) ++#define PCI_MAC_INTPEND (AR5315_PCI + 0x4008) ++#define PCI_MAC_SFR (AR5315_PCI + 0x400C) ++#define PCI_MAC_PCICFG (AR5315_PCI + 0x4010) ++#define PCI_MAC_SREV (AR5315_PCI + 0x4020) ++ ++#define PCI_MAC_RC_MAC 0x00000001 ++#define PCI_MAC_RC_BB 0x00000002 ++ ++#define PCI_MAC_SCR_SLMODE_M 0x00030000 ++#define PCI_MAC_SCR_SLMODE_S 16 ++#define PCI_MAC_SCR_SLM_FWAKE 0 ++#define PCI_MAC_SCR_SLM_FSLEEP 1 ++#define PCI_MAC_SCR_SLM_NORMAL 2 ++ ++#define PCI_MAC_SFR_SLEEP 0x00000001 ++ ++#define PCI_MAC_PCICFG_SPWR_DN 0x00010000 ++ ++ ++ ++ ++/* ++ * PCI Bus Interface Registers ++ */ ++#define AR5315_PCI_1MS_REG (AR5315_PCI + 0x0008) ++#define AR5315_PCI_1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */ ++ ++#define AR5315_PCI_MISC_CONFIG (AR5315_PCI + 0x000c) ++#define AR5315_PCIMISC_TXD_EN 0x00000001 /* Enable TXD for fragments */ ++#define AR5315_PCIMISC_CFG_SEL 0x00000002 /* mem or config cycles */ ++#define AR5315_PCIMISC_GIG_MASK 0x0000000C /* bits 31-30 for pci req */ ++#define AR5315_PCIMISC_RST_MODE 0x00000030 ++#define AR5315_PCIRST_INPUT 0x00000000 /* 4:5=0 rst is input */ ++#define AR5315_PCIRST_LOW 0x00000010 /* 4:5=1 rst to GND */ ++#define AR5315_PCIRST_HIGH 0x00000020 /* 4:5=2 rst to VDD */ ++#define AR5315_PCIGRANT_EN 0x00000000 /* 6:7=0 early grant en */ ++#define AR5315_PCIGRANT_FRAME 0x00000040 /* 6:7=1 grant waits 4 frame */ ++#define AR5315_PCIGRANT_IDLE 0x00000080 /* 6:7=2 grant waits 4 idle */ ++#define AR5315_PCIGRANT_GAP 0x00000000 /* 6:7=2 grant waits 4 idle */ ++#define AR5315_PCICACHE_DIS 0x00001000 /* PCI external access cache disable */ ++ ++#define AR5315_PCI_OUT_TSTAMP (AR5315_PCI + 0x0010) ++ ++#define AR5315_PCI_UNCACHE_CFG (AR5315_PCI + 0x0014) ++ ++#define AR5315_PCI_IN_EN (AR5315_PCI + 0x0100) ++#define AR5315_PCI_IN_EN0 0x01 /* Enable chain 0 */ ++#define AR5315_PCI_IN_EN1 0x02 /* Enable chain 1 */ ++#define AR5315_PCI_IN_EN2 0x04 /* Enable chain 2 */ ++#define AR5315_PCI_IN_EN3 0x08 /* Enable chain 3 */ ++ ++#define AR5315_PCI_IN_DIS (AR5315_PCI + 0x0104) ++#define AR5315_PCI_IN_DIS0 0x01 /* Disable chain 0 */ ++#define AR5315_PCI_IN_DIS1 0x02 /* Disable chain 1 */ ++#define AR5315_PCI_IN_DIS2 0x04 /* Disable chain 2 */ ++#define AR5315_PCI_IN_DIS3 0x08 /* Disable chain 3 */ ++ ++#define AR5315_PCI_IN_PTR (AR5315_PCI + 0x0200) ++ ++#define AR5315_PCI_OUT_EN (AR5315_PCI + 0x0400) ++#define AR5315_PCI_OUT_EN0 0x01 /* Enable chain 0 */ ++ ++#define AR5315_PCI_OUT_DIS (AR5315_PCI + 0x0404) ++#define AR5315_PCI_OUT_DIS0 0x01 /* Disable chain 0 */ ++ ++#define AR5315_PCI_OUT_PTR (AR5315_PCI + 0x0408) ++ ++#define AR5315_PCI_INT_STATUS (AR5315_PCI + 0x0500) /* write one to clr */ ++#define AR5315_PCI_TXINT 0x00000001 /* Desc In Completed */ ++#define AR5315_PCI_TXOK 0x00000002 /* Desc In OK */ ++#define AR5315_PCI_TXERR 0x00000004 /* Desc In ERR */ ++#define AR5315_PCI_TXEOL 0x00000008 /* Desc In End-of-List */ ++#define AR5315_PCI_RXINT 0x00000010 /* Desc Out Completed */ ++#define AR5315_PCI_RXOK 0x00000020 /* Desc Out OK */ ++#define AR5315_PCI_RXERR 0x00000040 /* Desc Out ERR */ ++#define AR5315_PCI_RXEOL 0x00000080 /* Desc Out EOL */ ++#define AR5315_PCI_TXOOD 0x00000200 /* Desc In Out-of-Desc */ ++#define AR5315_PCI_MASK 0x0000FFFF /* Desc Mask */ ++#define AR5315_PCI_EXT_INT 0x02000000 ++#define AR5315_PCI_ABORT_INT 0x04000000 ++ ++#define AR5315_PCI_INT_MASK (AR5315_PCI + 0x0504) /* same as INT_STATUS */ ++ ++#define AR5315_PCI_INTEN_REG (AR5315_PCI + 0x0508) ++#define AR5315_PCI_INT_DISABLE 0x00 /* disable pci interrupts */ ++#define AR5315_PCI_INT_ENABLE 0x01 /* enable pci interrupts */ ++ ++#define AR5315_PCI_HOST_IN_EN (AR5315_PCI + 0x0800) ++#define AR5315_PCI_HOST_IN_DIS (AR5315_PCI + 0x0804) ++#define AR5315_PCI_HOST_IN_PTR (AR5315_PCI + 0x0810) ++#define AR5315_PCI_HOST_OUT_EN (AR5315_PCI + 0x0900) ++#define AR5315_PCI_HOST_OUT_DIS (AR5315_PCI + 0x0904) ++#define AR5315_PCI_HOST_OUT_PTR (AR5315_PCI + 0x0908) ++ ++ ++/* ++ * Local Bus Interface Registers ++ */ ++#define AR5315_LB_CONFIG (AR5315_LOCAL + 0x0000) ++#define AR5315_LBCONF_OE 0x00000001 /* =1 OE is low-true */ ++#define AR5315_LBCONF_CS0 0x00000002 /* =1 first CS is low-true */ ++#define AR5315_LBCONF_CS1 0x00000004 /* =1 2nd CS is low-true */ ++#define AR5315_LBCONF_RDY 0x00000008 /* =1 RDY is low-true */ ++#define AR5315_LBCONF_WE 0x00000010 /* =1 Write En is low-true */ ++#define AR5315_LBCONF_WAIT 0x00000020 /* =1 WAIT is low-true */ ++#define AR5315_LBCONF_ADS 0x00000040 /* =1 Adr Strobe is low-true */ ++#define AR5315_LBCONF_MOT 0x00000080 /* =0 Intel, =1 Motorola */ ++#define AR5315_LBCONF_8CS 0x00000100 /* =1 8 bits CS, 0= 16bits */ ++#define AR5315_LBCONF_8DS 0x00000200 /* =1 8 bits Data S, 0=16bits */ ++#define AR5315_LBCONF_ADS_EN 0x00000400 /* =1 Enable ADS */ ++#define AR5315_LBCONF_ADR_OE 0x00000800 /* =1 Adr cap on OE, WE or DS */ ++#define AR5315_LBCONF_ADDT_MUX 0x00001000 /* =1 Adr and Data share bus */ ++#define AR5315_LBCONF_DATA_OE 0x00002000 /* =1 Data cap on OE, WE, DS */ ++#define AR5315_LBCONF_16DATA 0x00004000 /* =1 Data is 16 bits wide */ ++#define AR5315_LBCONF_SWAPDT 0x00008000 /* =1 Byte swap data */ ++#define AR5315_LBCONF_SYNC 0x00010000 /* =1 Bus synchronous to clk */ ++#define AR5315_LBCONF_INT 0x00020000 /* =1 Intr is low true */ ++#define AR5315_LBCONF_INT_CTR0 0x00000000 /* GND high-Z, Vdd is high-Z */ ++#define AR5315_LBCONF_INT_CTR1 0x00040000 /* GND drive, Vdd is high-Z */ ++#define AR5315_LBCONF_INT_CTR2 0x00080000 /* GND high-Z, Vdd drive */ ++#define AR5315_LBCONF_INT_CTR3 0x000C0000 /* GND drive, Vdd drive */ ++#define AR5315_LBCONF_RDY_WAIT 0x00100000 /* =1 RDY is negative of WAIT */ ++#define AR5315_LBCONF_INT_PULSE 0x00200000 /* =1 Interrupt is a pulse */ ++#define AR5315_LBCONF_ENABLE 0x00400000 /* =1 Falcon respond to LB */ ++ ++#define AR5315_LB_CLKSEL (AR5315_LOCAL + 0x0004) ++#define AR5315_LBCLK_EXT 0x0001 /* use external clk for lb */ ++ ++#define AR5315_LB_1MS (AR5315_LOCAL + 0x0008) ++#define AR5315_LB1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */ ++ ++#define AR5315_LB_MISCCFG (AR5315_LOCAL + 0x000C) ++#define AR5315_LBM_TXD_EN 0x00000001 /* Enable TXD for fragments */ ++#define AR5315_LBM_RX_INTEN 0x00000002 /* Enable LB ints on RX ready */ ++#define AR5315_LBM_MBOXWR_INTEN 0x00000004 /* Enable LB ints on mbox wr */ ++#define AR5315_LBM_MBOXRD_INTEN 0x00000008 /* Enable LB ints on mbox rd */ ++#define AR5315_LMB_DESCSWAP_EN 0x00000010 /* Byte swap desc enable */ ++#define AR5315_LBM_TIMEOUT_MASK 0x00FFFF80 ++#define AR5315_LBM_TIMEOUT_SHFT 7 ++#define AR5315_LBM_PORTMUX 0x07000000 ++ ++ ++#define AR5315_LB_RXTSOFF (AR5315_LOCAL + 0x0010) ++ ++#define AR5315_LB_TX_CHAIN_EN (AR5315_LOCAL + 0x0100) ++#define AR5315_LB_TXEN_0 0x01 ++#define AR5315_LB_TXEN_1 0x02 ++#define AR5315_LB_TXEN_2 0x04 ++#define AR5315_LB_TXEN_3 0x08 ++ ++#define AR5315_LB_TX_CHAIN_DIS (AR5315_LOCAL + 0x0104) ++#define AR5315_LB_TX_DESC_PTR (AR5315_LOCAL + 0x0200) ++ ++#define AR5315_LB_RX_CHAIN_EN (AR5315_LOCAL + 0x0400) ++#define AR5315_LB_RXEN 0x01 ++ ++#define AR5315_LB_RX_CHAIN_DIS (AR5315_LOCAL + 0x0404) ++#define AR5315_LB_RX_DESC_PTR (AR5315_LOCAL + 0x0408) ++ ++#define AR5315_LB_INT_STATUS (AR5315_LOCAL + 0x0500) ++#define AR5315_INT_TX_DESC 0x0001 ++#define AR5315_INT_TX_OK 0x0002 ++#define AR5315_INT_TX_ERR 0x0004 ++#define AR5315_INT_TX_EOF 0x0008 ++#define AR5315_INT_RX_DESC 0x0010 ++#define AR5315_INT_RX_OK 0x0020 ++#define AR5315_INT_RX_ERR 0x0040 ++#define AR5315_INT_RX_EOF 0x0080 ++#define AR5315_INT_TX_TRUNC 0x0100 ++#define AR5315_INT_TX_STARVE 0x0200 ++#define AR5315_INT_LB_TIMEOUT 0x0400 ++#define AR5315_INT_LB_ERR 0x0800 ++#define AR5315_INT_MBOX_WR 0x1000 ++#define AR5315_INT_MBOX_RD 0x2000 ++ ++/* Bit definitions for INT MASK are the same as INT_STATUS */ ++#define AR5315_LB_INT_MASK (AR5315_LOCAL + 0x0504) ++ ++#define AR5315_LB_INT_EN (AR5315_LOCAL + 0x0508) ++#define AR5315_LB_MBOX (AR5315_LOCAL + 0x0600) ++ ++ ++ ++/* ++ * IR Interface Registers ++ */ ++#define AR5315_IR_PKTDATA (AR5315_IR + 0x0000) ++ ++#define AR5315_IR_PKTLEN (AR5315_IR + 0x07fc) /* 0 - 63 */ ++ ++#define AR5315_IR_CONTROL (AR5315_IR + 0x0800) ++#define AR5315_IRCTL_TX 0x00000000 /* use as tranmitter */ ++#define AR5315_IRCTL_RX 0x00000001 /* use as receiver */ ++#define AR5315_IRCTL_SAMPLECLK_MASK 0x00003ffe /* Sample clk divisor mask */ ++#define AR5315_IRCTL_SAMPLECLK_SHFT 1 ++#define AR5315_IRCTL_OUTPUTCLK_MASK 0x03ffc000 /* Output clk divisor mask */ ++#define AR5315_IRCTL_OUTPUTCLK_SHFT 14 ++ ++#define AR5315_IR_STATUS (AR5315_IR + 0x0804) ++#define AR5315_IRSTS_RX 0x00000001 /* receive in progress */ ++#define AR5315_IRSTS_TX 0x00000002 /* transmit in progress */ ++ ++#define AR5315_IR_CONFIG (AR5315_IR + 0x0808) ++#define AR5315_IRCFG_INVIN 0x00000001 /* invert input polarity */ ++#define AR5315_IRCFG_INVOUT 0x00000002 /* invert output polarity */ ++#define AR5315_IRCFG_SEQ_START_WIN_SEL 0x00000004 /* 1 => 28, 0 => 7 */ ++#define AR5315_IRCFG_SEQ_START_THRESH 0x000000f0 /* */ ++#define AR5315_IRCFG_SEQ_END_UNIT_SEL 0x00000100 /* */ ++#define AR5315_IRCFG_SEQ_END_UNIT_THRESH 0x00007e00 /* */ ++#define AR5315_IRCFG_SEQ_END_WIN_SEL 0x00008000 /* */ ++#define AR5315_IRCFG_SEQ_END_WIN_THRESH 0x001f0000 /* */ ++#define AR5315_IRCFG_NUM_BACKOFF_WORDS 0x01e00000 /* */ ++ ++/* ++ * PCI memory constants: Memory area 1 and 2 are the same size - ++ * (twice the PCI_TLB_PAGE_SIZE). The definition of ++ * CPU_TO_PCI_MEM_SIZE is coupled with the TLB setup routine ++ * sysLib.c/sysTlbInit(), in that it assumes that 2 pages of size ++ * PCI_TLB_PAGE_SIZE are set up in the TLB for each PCI memory space. ++ */ ++ ++#define CPU_TO_PCI_MEM_BASE1 0xE0000000 ++#define CPU_TO_PCI_MEM_SIZE1 (2*PCI_TLB_PAGE_SIZE) ++ ++ ++/* TLB attributes for PCI transactions */ ++ ++#define PCI_MMU_PAGEMASK 0x00003FFF ++#define MMU_PAGE_UNCACHED 0x00000010 ++#define MMU_PAGE_DIRTY 0x00000004 ++#define MMU_PAGE_VALID 0x00000002 ++#define MMU_PAGE_GLOBAL 0x00000001 ++#define PCI_MMU_PAGEATTRIB (MMU_PAGE_UNCACHED|MMU_PAGE_DIRTY|\ ++ MMU_PAGE_VALID|MMU_PAGE_GLOBAL) ++#define PCI_MEMORY_SPACE1_VIRT 0xE0000000 /* Used for non-prefet mem */ ++#define PCI_MEMORY_SPACE1_PHYS 0x80000000 ++#define PCI_TLB_PAGE_SIZE 0x01000000 ++#define TLB_HI_MASK 0xFFFFE000 ++#define TLB_LO_MASK 0x3FFFFFFF ++#define PAGEMASK_SHIFT 11 ++#define TLB_LO_SHIFT 6 ++ ++#define PCI_MAX_LATENCY 0xFFF /* Max PCI latency */ ++ ++#define HOST_PCI_DEV_ID 3 ++#define HOST_PCI_MBAR0 0x10000000 ++#define HOST_PCI_MBAR1 0x20000000 ++#define HOST_PCI_MBAR2 0x30000000 ++ ++#define HOST_PCI_SDRAM_BASEADDR HOST_PCI_MBAR1 ++#define PCI_DEVICE_MEM_SPACE 0x800000 ++ ++ ++typedef unsigned int AR531X_REG; ++ ++#define sysRegRead(phys) \ ++ (*(volatile AR531X_REG *)PHYS_TO_K1(phys)) ++ ++#define sysRegWrite(phys, val) \ ++ ((*(volatile AR531X_REG *)PHYS_TO_K1(phys)) = (val)) ++#endif ++ ++#endif +diff -urN linux-mips/arch/mips/ar531x/ar531xintr.S mips-linux-2.4.25/arch/mips/ar531x/ar531xintr.S +--- linux-mips/arch/mips/ar531x/ar531xintr.S 1970-01-01 01:00:00.000000000 +0100 ++++ mips-linux-2.4.25/arch/mips/ar531x/ar531xintr.S 2005-12-30 17:26:31.000823952 +0000 +@@ -0,0 +1,30 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved. ++ */ ++ ++#include ++#include ++#include ++#include ++ ++/* ++ * Glue code to save registers and get us to the interrupt dispatcher ++ */ ++ .text ++ .set noat ++ .align 5 ++NESTED(ar531x_interrupt_receive, PT_SIZE, sp) ++ SAVE_ALL ++ CLI ++ .set at ++ ++ move a0, sp ++ jal ar531x_irq_dispatch ++ ++ j ret_from_irq ++ ++ END(ar531x_interrupt_receive) +diff -urN linux-mips/arch/mips/ar531x/ar531xirq.c mips-linux-2.4.25/arch/mips/ar531x/ar531xirq.c +--- linux-mips/arch/mips/ar531x/ar531xirq.c 1970-01-01 01:00:00.000000000 +0100 ++++ mips-linux-2.4.25/arch/mips/ar531x/ar531xirq.c 2005-12-30 17:26:31.000823952 +0000 +@@ -0,0 +1,442 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved. ++ */ ++ ++/* ++ * Interrupt support for AR531X WiSOC. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++#include "ar531xlnx.h" ++#include ++ ++extern int setup_irq(unsigned int irq, struct irqaction *irqaction); ++ ++static void ar531x_misc_intr_enable(unsigned int irq); ++static void ar531x_misc_intr_disable(unsigned int irq); ++ ++/* Turn on the specified AR531X_MISC_IRQ interrupt */ ++static unsigned int ++ar531x_misc_intr_startup(unsigned int irq) ++{ ++ ar531x_misc_intr_enable(irq); ++ return 0; ++} ++ ++/* Turn off the specified AR531X_MISC_IRQ interrupt */ ++static void ++ar531x_misc_intr_shutdown(unsigned int irq) ++{ ++ ar531x_misc_intr_disable(irq); ++} ++ ++/* Enable the specified AR531X_MISC_IRQ interrupt */ ++static void ++ar531x_misc_intr_enable(unsigned int irq) ++{ ++ unsigned int imr; ++ ++#if CONFIG_AR5315 ++ imr = sysRegRead(AR5315_IMR); ++ switch(irq) ++ { ++ case AR531X_MISC_IRQ_TIMER: ++ imr |= IMR_TIMER; ++ break; ++ ++ case AR531X_MISC_IRQ_AHB_PROC: ++ imr |= IMR_AHB; ++ break; ++ ++ case AR531X_MISC_IRQ_AHB_DMA: ++ imr |= 0/* ?? */; ++ break; ++ /* ++ case AR531X_ISR_GPIO: ++ imr |= IMR_GPIO; ++ break; ++ */ ++ ++ case AR531X_MISC_IRQ_UART0: ++ imr |= IMR_UART0; ++ break; ++ ++ ++ case AR531X_MISC_IRQ_WATCHDOG: ++ imr |= IMR_WD; ++ break; ++ ++ case AR531X_MISC_IRQ_LOCAL: ++ imr |= 0/* ?? */; ++ break; ++ ++ } ++ sysRegWrite(AR5315_IMR, imr); ++ imr=sysRegRead(AR5315_IMR); /* flush write buffer */ ++ //printk("enable Interrupt irq 0x%x imr 0x%x \n",irq,imr); ++ ++#else ++ imr = sysRegRead(AR531X_IMR); ++ imr |= (1 << (irq - AR531X_MISC_IRQ_BASE - 1)); ++ sysRegWrite(AR531X_IMR, imr); ++ sysRegRead(AR531X_IMR); /* flush write buffer */ ++#endif ++} ++ ++/* Disable the specified AR531X_MISC_IRQ interrupt */ ++static void ++ar531x_misc_intr_disable(unsigned int irq) ++{ ++ unsigned int imr; ++ ++#if CONFIG_AR5315 ++ imr = sysRegRead(AR5315_IMR); ++ switch(irq) ++ { ++ case AR531X_MISC_IRQ_TIMER: ++ imr &= (~IMR_TIMER); ++ break; ++ ++ case AR531X_MISC_IRQ_AHB_PROC: ++ imr &= (~IMR_AHB); ++ break; ++ ++ case AR531X_MISC_IRQ_AHB_DMA: ++ imr &= 0/* ?? */; ++ break; ++ /* ++ case AR531X_ISR_GPIO: ++ imr &= ~IMR_GPIO; ++ break; ++ */ ++ ++ case AR531X_MISC_IRQ_UART0: ++ imr &= (~IMR_UART0); ++ break; ++ ++ case AR531X_MISC_IRQ_WATCHDOG: ++ imr &= (~IMR_WD); ++ break; ++ ++ case AR531X_MISC_IRQ_LOCAL: ++ imr &= ~0/* ?? */; ++ break; ++ ++ } ++ sysRegWrite(AR5315_IMR, imr); ++ sysRegRead(AR5315_IMR); /* flush write buffer */ ++#else ++ imr = sysRegRead(AR531X_IMR); ++ imr &= ~(1 << (irq - AR531X_MISC_IRQ_BASE - 1)); ++ sysRegWrite(AR531X_IMR, imr); ++ sysRegRead(AR531X_IMR); /* flush write buffer */ ++#endif ++} ++ ++static void ++ar531x_misc_intr_ack(unsigned int irq) ++{ ++ ar531x_misc_intr_disable(irq); ++} ++ ++static void ++ar531x_misc_intr_end(unsigned int irq) ++{ ++ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) ++ ar531x_misc_intr_enable(irq); ++} ++ ++static void ++ar531x_misc_intr_set_affinity(unsigned int irq, unsigned long mask) ++{ ++ /* Only 1 CPU; ignore affinity request */ ++} ++ ++struct hw_interrupt_type ar531x_misc_intr_controller = { ++ "AR531X MISC", ++ ar531x_misc_intr_startup, ++ ar531x_misc_intr_shutdown, ++ ar531x_misc_intr_enable, ++ ar531x_misc_intr_disable, ++ ar531x_misc_intr_ack, ++ ar531x_misc_intr_end, ++ ar531x_misc_intr_set_affinity, ++}; ++ ++int ar531x_misc_irq_base; ++ ++/* ++ * Determine interrupt source among interrupts that use IP6 ++ */ ++void ++ar531x_misc_intr_init(int irq_base) ++{ ++ int i; ++ ++ for (i = irq_base; i < irq_base + AR531X_MISC_IRQ_COUNT; i++) { ++ irq_desc[i].status = IRQ_DISABLED; ++ irq_desc[i].action = NULL; ++ irq_desc[i].depth = 1; ++ irq_desc[i].handler = &ar531x_misc_intr_controller; ++ } ++ ++ ar531x_misc_irq_base = irq_base; ++} ++ ++/* ARGSUSED */ ++void ++spurious_irq_handler(int cpl, void *dev_id, struct pt_regs *regs) ++{ ++ /* ++ printk("spurious_irq_handler: %d cause=0x%8.8x status=0x%8.8x\n", ++ cpl, cause_intrs, status_intrs); ++ */ ++} ++ ++/* ARGSUSED */ ++void ++spurious_misc_handler(int cpl, void *dev_id, struct pt_regs *regs) ++{ ++ /* ++ printk("spurious_misc_handler: 0x%x isr=0x%8.8x imr=0x%8.8x\n", ++ cpl, ar531x_isr, ar531x_imr); ++ */ ++} ++ ++void ++ar531x_timer_handler(int cpl, void *dev_id, struct pt_regs *regs) ++{ ++#if CONFIG_AR5315 ++ (void)sysRegRead(AR5315_TIMER); /* clear interrupt */ ++#else ++ (void)sysRegRead(AR531X_TIMER); /* clear interrupt */ ++#endif ++} ++ ++void ++ar531x_ahb_proc_handler(int cpl, void *dev_id, struct pt_regs *regs) ++{ ++ u32 procAddr; ++ u32 proc1; ++ u32 dmaAddr; ++ u32 dma1; ++#if CONFIG_AR5315 ++ sysRegWrite(AR5315_AHB_ERR0,AHB_ERROR_DET); ++ sysRegRead(AR5315_AHB_ERR1); ++#else ++ proc1 = sysRegRead(AR531X_PROC1); ++ procAddr = sysRegRead(AR531X_PROCADDR); /* clears error state */ ++ dma1 = sysRegRead(AR531X_DMA1); ++ dmaAddr = sysRegRead(AR531X_DMAADDR); /* clears error state */ ++#endif ++ ++ printk("AHB interrupt: PROCADDR=0x%8.8x PROC1=0x%8.8x DMAADDR=0x%8.8x DMA1=0x%8.8x\n", ++ procAddr, proc1, dmaAddr, dma1); ++ ++ machine_restart("AHB error"); /* Catastrophic failure */ ++} ++ ++static struct irqaction cascade = ++ {no_action, SA_INTERRUPT, 0, "cascade", ++ NULL, NULL}; ++ ++static struct irqaction spurious_irq = ++ {spurious_irq_handler, SA_INTERRUPT, 0, "spurious_irq", ++ NULL, NULL}; ++ ++static struct irqaction spurious_misc = ++ {spurious_misc_handler, SA_INTERRUPT, 0, "spurious_misc", ++ NULL, NULL}; ++ ++static struct irqaction ar531x_timer_interrupt = ++ {ar531x_timer_handler, SA_INTERRUPT, 0, "ar531x_timer_interrupt", ++ NULL, NULL}; ++ ++static struct irqaction ar531x_ahb_proc_interrupt = ++ {ar531x_ahb_proc_handler, SA_INTERRUPT, 0, "ar531x_ahb_proc_interrupt", ++ NULL, NULL}; ++ ++extern asmlinkage void ar531x_interrupt_receive(void); ++ ++/* ++ * Called when an interrupt is received, this function ++ * determines exactly which interrupt it was, and it ++ * invokes the appropriate handler. ++ * ++ * Implicitly, we also define interrupt priority by ++ * choosing which to dispatch first. ++ */ ++extern void dump_uart(void *); ++ ++#if CONFIG_AR5315 ++ ++void ++ar531x_irq_dispatch(struct pt_regs *regs) ++{ ++ int cause_intrs = regs->cp0_cause; ++ int status_intrs = regs->cp0_status; ++ int pending = cause_intrs & status_intrs; ++ ++ if (pending & CAUSEF_IP3) { ++ do_IRQ(AR531X_IRQ_WLAN0_INTRS, regs); ++ } ++ else if (pending & CAUSEF_IP4) { ++ do_IRQ(AR531X_IRQ_ENET0_INTRS, regs); ++ } ++ else if (pending & CAUSEF_IP2) { ++ AR531X_REG ar531x_isr = sysRegRead(AR5315_ISR); ++ AR531X_REG ar531x_imr = sysRegRead(AR5315_IMR); ++ unsigned int ar531x_misc_intrs = ar531x_isr & ar531x_imr; ++ ++ if (ar531x_misc_intrs & ISR_TIMER) ++ do_IRQ(AR531X_MISC_IRQ_TIMER, regs); ++ else if (ar531x_misc_intrs & ISR_AHB) ++ do_IRQ(AR531X_MISC_IRQ_AHB_PROC, regs); ++ else if (ar531x_misc_intrs & ISR_GPIO) ++ { ++ int i; ++ u32 gpioIntPending; ++ ++ gpioIntPending = sysRegRead(AR5315_GPIO_DI) & gpioIntMask; ++ for (i=0; icp0_epc); ++ } ++#endif /* CONFIG_KGDB */ ++ } ++ else if (ar531x_misc_intrs & ISR_WD) ++ do_IRQ(AR531X_MISC_IRQ_WATCHDOG, regs); ++ else ++ do_IRQ(AR531X_MISC_IRQ_NONE, regs); ++ } else if (pending & CAUSEF_IP7) { ++ do_IRQ(AR531X_IRQ_CPU_CLOCK, regs); ++ } ++ else { ++ do_IRQ(AR531X_IRQ_NONE, regs); ++ } ++} ++ ++#else ++ ++void ++ar531x_irq_dispatch(struct pt_regs *regs) ++{ ++ int cause_intrs = regs->cp0_cause; ++ int status_intrs = regs->cp0_status; ++ int pending = cause_intrs & status_intrs; ++ ++ if (pending & CAUSEF_IP2) { ++ do_IRQ(AR531X_IRQ_WLAN0_INTRS, regs); ++ } ++ else if (pending & CAUSEF_IP3) { ++ do_IRQ(AR531X_IRQ_ENET0_INTRS, regs); ++ } ++ else if (pending & CAUSEF_IP4) { ++ do_IRQ(AR531X_IRQ_ENET1_INTRS, regs); ++ } ++ else if (pending & CAUSEF_IP5) { ++ do_IRQ(AR531X_IRQ_WLAN1_INTRS, regs); ++ } ++ else if (pending & CAUSEF_IP6) { ++ AR531X_REG ar531x_isr = sysRegRead(AR531X_ISR); ++ AR531X_REG ar531x_imr = sysRegRead(AR531X_IMR); ++ unsigned int ar531x_misc_intrs = ar531x_isr & ar531x_imr; ++ ++ if (ar531x_misc_intrs & AR531X_ISR_TIMER) ++ do_IRQ(AR531X_MISC_IRQ_TIMER, regs); ++ else if (ar531x_misc_intrs & AR531X_ISR_AHBPROC) ++ do_IRQ(AR531X_MISC_IRQ_AHB_PROC, regs); ++ else if (ar531x_misc_intrs & AR531X_ISR_AHBDMA) ++ do_IRQ(AR531X_MISC_IRQ_AHB_DMA, regs); ++ else if (ar531x_misc_intrs & AR531X_ISR_GPIO) ++ { ++ int i; ++ u32 gpioIntPending; ++ ++ gpioIntPending = sysRegRead(AR531X_GPIO_DI) & gpioIntMask; ++ for (i=0; icp0_epc); ++ } ++#endif /* CONFIG_KGDB */ ++ } ++ else if (ar531x_misc_intrs & AR531X_ISR_WD) ++ do_IRQ(AR531X_MISC_IRQ_WATCHDOG, regs); ++ else if (ar531x_misc_intrs & AR531X_ISR_LOCAL) ++ do_IRQ(AR531X_MISC_IRQ_LOCAL, regs); ++ else ++ do_IRQ(AR531X_MISC_IRQ_NONE, regs); ++ } else if (pending & CAUSEF_IP7) { ++ do_IRQ(AR531X_IRQ_CPU_CLOCK, regs); ++ } else ++ do_IRQ(AR531X_IRQ_NONE, regs); ++} ++ ++#endif ++ ++void __init init_IRQ(void) ++{ ++ init_generic_irq(); ++ set_except_vector(0, ar531x_interrupt_receive); ++ ++ /* Initialize interrupt controllers */ ++ mips_cpu_irq_init(MIPS_CPU_IRQ_BASE); ++ ar531x_misc_intr_init(AR531X_MISC_IRQ_BASE); ++ ar531x_gpio_intr_init(AR531X_GPIO_IRQ_BASE); ++ setup_irq(AR531X_IRQ_MISC_INTRS, &cascade); ++ /* ++ * AR531X_IRQ_CPU_CLOCK is setup by ar531x_timer_setup. ++ */ ++ ++ /* Default "spurious interrupt" handlers */ ++ setup_irq(AR531X_IRQ_NONE, &spurious_irq); ++ setup_irq(AR531X_MISC_IRQ_NONE, &spurious_misc); ++ setup_irq(AR531X_GPIO_IRQ_NONE, &spurious_gpio); ++#ifndef CONFIG_AR5315 ++ setup_irq(AR531X_MISC_IRQ_TIMER, &ar531x_timer_interrupt); ++#endif ++ setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar531x_ahb_proc_interrupt); ++ setup_irq(AR531X_MISC_IRQ_GPIO, &cascade); ++ ++#ifdef CONFIG_KGDB ++#if CONFIG_EARLY_STOP ++ kgdbInit(); ++#endif ++#endif ++} +diff -urN linux-mips/arch/mips/ar531x/ar531xksyms.c mips-linux-2.4.25/arch/mips/ar531x/ar531xksyms.c +--- linux-mips/arch/mips/ar531x/ar531xksyms.c 1970-01-01 01:00:00.000000000 +0100 ++++ mips-linux-2.4.25/arch/mips/ar531x/ar531xksyms.c 2005-12-30 17:26:31.001823800 +0000 +@@ -0,0 +1,17 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved. ++ */ ++ ++#include ++#include "asm/atheros/ar531xbsp.h" ++ ++#ifdef CONFIG_KGDB ++EXPORT_SYMBOL(kgdbInit); ++EXPORT_SYMBOL(kgdbEnabled); ++#endif ++EXPORT_SYMBOL(ar531x_sys_frequency); ++EXPORT_SYMBOL(get_system_type); +diff -urN linux-mips/arch/mips/ar531x/ar531xlnx.h mips-linux-2.4.25/arch/mips/ar531x/ar531xlnx.h +--- linux-mips/arch/mips/ar531x/ar531xlnx.h 1970-01-01 01:00:00.000000000 +0100 ++++ mips-linux-2.4.25/arch/mips/ar531x/ar531xlnx.h 2005-12-30 17:26:31.001823800 +0000 +@@ -0,0 +1,135 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved. ++ */ ++ ++/* ++ * This file contains definitions needed in order to compile ++ * AR531X products for linux. Definitions that are largely ++ * AR531X-specific and independent of operating system belong ++ * in ar531x.h rather than this file. ++ */ ++#include "ar531x.h" ++ ++#define MIPS_CPU_IRQ_BASE 0x00 ++#define AR531X_HIGH_PRIO 0x10 ++#define AR531X_MISC_IRQ_BASE 0x20 ++#define AR531X_GPIO_IRQ_BASE 0x30 ++ ++/* Software's idea of interrupts handled by "CPU Interrupt Controller" */ ++#if CONFIG_AR5315 ++#define AR531X_IRQ_NONE MIPS_CPU_IRQ_BASE+0 ++#define AR531X_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */ ++#define AR531X_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */ ++#define AR531X_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */ ++#define AR531X_IRQ_LCBUS_PCI MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */ ++#define AR531X_IRQ_WLAN0_POLL MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */ ++#define AR531X_IRQ_CPU_CLOCK MIPS_CPU_IRQ_BASE+7 /* C0_CAUSE: 0x8000 */ ++#else ++#define AR531X_IRQ_NONE MIPS_CPU_IRQ_BASE+0 ++#define AR531X_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */ ++#define AR531X_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */ ++#define AR531X_IRQ_ENET1_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */ ++#define AR531X_IRQ_WLAN1_INTRS MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */ ++#define AR531X_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */ ++#define AR531X_IRQ_CPU_CLOCK MIPS_CPU_IRQ_BASE+7 /* C0_CAUSE: 0x8000 */ ++#endif ++/* Miscellaneous interrupts, which share IP6 */ ++#define AR531X_MISC_IRQ_NONE AR531X_MISC_IRQ_BASE+0 ++#define AR531X_MISC_IRQ_TIMER AR531X_MISC_IRQ_BASE+1 ++#define AR531X_MISC_IRQ_AHB_PROC AR531X_MISC_IRQ_BASE+2 ++#define AR531X_MISC_IRQ_AHB_DMA AR531X_MISC_IRQ_BASE+3 ++#define AR531X_MISC_IRQ_GPIO AR531X_MISC_IRQ_BASE+4 ++#define AR531X_MISC_IRQ_UART0 AR531X_MISC_IRQ_BASE+5 ++#define AR531X_MISC_IRQ_UART0_DMA AR531X_MISC_IRQ_BASE+6 ++#define AR531X_MISC_IRQ_WATCHDOG AR531X_MISC_IRQ_BASE+7 ++#define AR531X_MISC_IRQ_LOCAL AR531X_MISC_IRQ_BASE+8 ++#define AR531X_MISC_IRQ_COUNT 9 ++ ++/* GPIO Interrupts [0..7], share AR531X_MISC_IRQ_GPIO */ ++#define AR531X_GPIO_IRQ_NONE AR531X_MISC_IRQ_BASE+0 ++#define AR531X_GPIO_IRQ(n) AR531X_MISC_IRQ_BASE+(n)+1 ++#ifdef CONFIG_AR5315 ++#define AR531X_GPIO_IRQ_COUNT 2 ++#else ++#define AR531X_GPIO_IRQ_COUNT 9 ++#endif ++ ++#define PHYS_TO_K1(physaddr) KSEG1ADDR(physaddr) ++#define PHYS_TO_K0(physaddr) KSEG0ADDR(physaddr) ++#define UNMAPPED_TO_PHYS(vaddr) PHYSADDR(vaddr) ++#define IS_UNMAPPED_VADDR(vaddr) \ ++ ((KSEGX(vaddr) == KSEG0) || (KSEGX(vaddr) == KSEG1)) ++ ++/* IOCTL commands for /proc/ar531x */ ++#define AR531X_CTRL_DO_BREAKPOINT 1 ++#define AR531X_CTRL_DO_MADWIFI 2 ++ ++/* ++ * Definitions for operating system portability. ++ * These are vxWorks-->Linux translations. ++ */ ++#define LOCAL static ++#define BOOL int ++#define TRUE 1 ++#define FALSE 0 ++#define UINT8 u8 ++#define UINT16 u16 ++#define UINT32 u32 ++#define PRINTF printk ++#if /* DEBUG */ 1 ++#define DEBUG_PRINTF printk ++#define INLINE ++#else ++DEBUG_PRINTF while (0) printk ++#define INLINE inline ++#endif ++#define sysUDelay(usecs) udelay(usecs) ++#define sysMsDelay(msecs) mdelay(msecs) ++typedef volatile UINT8 *VIRT_ADDR; ++#define MALLOC(sz) kmalloc(sz, GFP_KERNEL) ++#define MALLOC_NOSLEEP(sz) kmalloc(sz, GFP_ATOMIC) ++#define FREE(ptr) kfree((void *)ptr) ++#define BSP_BUG() do { printk("kernel BSP BUG at %s:%d!\n", __FILE__, __LINE__); *(int *)0=0; } while (0) ++#define BSP_BUG_ON(condition) do { if (unlikely((condition)!=0)) BSP_BUG(); } while(0) ++#define ASSERT(x) BSP_BUG_ON(!(x)) ++ ++extern struct ar531x_boarddata *ar531x_board_configuration; ++extern char *ar531x_radio_configuration; ++extern char *enet_mac_address_get(int MACUnit); ++ ++extern void kgdbInit(void); ++extern int kgdbEnabled(void); ++extern void breakpoint(void); ++extern int kgdbInterrupt(void); ++extern unsigned int ar531x_cpu_frequency(void); ++extern unsigned int ar531x_sys_frequency(void); ++ ++/* GPIO support */ ++extern struct irqaction spurious_gpio; ++extern unsigned int gpioIntMask; ++extern void ar531x_gpio_intr_init(int irq_base); ++extern void ar531x_gpio_ctrl_output(int gpio); ++extern void ar531x_gpio_ctrl_input(int gpio); ++extern void ar531x_gpio_set(int gpio, int val); ++extern int ar531x_gpio_get(int gpio); ++extern void ar531x_gpio_intr_enable(unsigned int irq); ++extern void ar531x_gpio_intr_disable(unsigned int irq); ++ ++/* Watchdog Timer support */ ++extern int watchdog_start(unsigned int milliseconds); ++extern int watchdog_stop(void); ++extern int watchdog_is_enabled(void); ++extern unsigned int watchdog_min_timer_reached(void); ++extern void watchdog_notify_alive(void); ++ ++#define A_DATA_CACHE_INVAL(start, length) \ ++ dma_cache_inv((UINT32)(start),(length)) ++ ++#define sysWbFlush() mb() ++ ++#define intDisable(x) cli() ++#define intEnable(x) sti() +diff -urN linux-mips/arch/mips/ar531x/ar531xprom.c mips-linux-2.4.25/arch/mips/ar531x/ar531xprom.c +--- linux-mips/arch/mips/ar531x/ar531xprom.c 1970-01-01 01:00:00.000000000 +0100 ++++ mips-linux-2.4.25/arch/mips/ar531x/ar531xprom.c 2005-12-30 17:26:31.001823800 +0000 +@@ -0,0 +1,88 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright MontaVista Software Inc ++ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved. ++ */ ++ ++/* ++ * Prom setup file for ar531x ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#include "ar531xlnx.h" ++ ++#define COMMAND_LINE_SIZE 512 ++ ++char arcs_cmdline[COMMAND_LINE_SIZE]; ++ ++void __init prom_init(int argc, char *argv[]) ++{ ++ int i; ++ unsigned int memcfg1; ++ int bank0AC, bank1AC; ++ int memsz_in_mb; ++ strcpy(arcs_cmdline, "console=ttyS0,9600"); ++ for (i=0; i> MEM_CFG1_AC0_S; ++ bank1AC = (memcfg1 & MEM_CFG1_AC1) >> MEM_CFG1_AC1_S; ++ memsz_in_mb = (bank0AC ? (1 << (bank0AC+1)) : 0) ++ + (bank1AC ? (1 << (bank1AC+1)) : 0); ++#endif ++ ++ /* ++ * By default, use all available memory. You can override this ++ * to use, say, 8MB by specifying "mem=8M" as an argument on the ++ * linux bootup command line. ++ */ ++ add_memory_region(0, memsz_in_mb << 20, BOOT_MEM_RAM); ++} ++ ++void __init prom_free_prom_memory(void) ++{ ++} +diff -urN linux-mips/arch/mips/ar531x/ar531xsetup.c mips-linux-2.4.25/arch/mips/ar531x/ar531xsetup.c +--- linux-mips/arch/mips/ar531x/ar531xsetup.c 1970-01-01 01:00:00.000000000 +0100 ++++ mips-linux-2.4.25/arch/mips/ar531x/ar531xsetup.c 2005-12-30 17:26:31.002823648 +0000 +@@ -0,0 +1,406 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved. ++ */ ++ ++/* ++ * Initialization for ar531x SOC. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "ar531xlnx.h" ++ ++void ++ar531x_restart(char *command) ++{ ++ for(;;) { ++#if CONFIG_AR5315 ++ /* ++ ** Cold reset does not work,work around is to use the GPIO reset bit. ++ */ ++ unsigned int reg; ++ reg = sysRegRead(AR5315_GPIO_DO); ++ reg &= ~(1 << AR5315_RESET_GPIO); ++ sysRegWrite(AR5315_GPIO_DO, reg); ++ (void)sysRegRead(AR5315_GPIO_DO); /* flush write to hardware */ ++ ++#else ++ sysRegWrite(AR531X_RESET, AR531X_RESET_SYSTEM); ++#endif ++ } ++} ++ ++void ++ar531x_halt(void) ++{ ++ printk(KERN_NOTICE "\n** You can safely turn off the power\n"); ++ while (1); ++} ++ ++void ++ar531x_power_off(void) ++{ ++ ar531x_halt(); ++} ++ ++const char * ++get_system_type(void) ++{ ++#if CONFIG_AR5315 ++ return "Atheros AR5315"; ++#else ++ return "Atheros AR531X"; ++#endif ++} ++ ++/* ++ * This table is indexed by bits 5..4 of the CLOCKCTL1 register ++ * to determine the predevisor value. ++ */ ++static int CLOCKCTL1_PREDIVIDE_TABLE[4] = { ++ 1, ++ 2, ++ 4, ++ 5 ++}; ++ ++#if CONFIG_AR5315 ++static int PLLC_DIVIDE_TABLE[5] = { ++ 2, ++ 3, ++ 4, ++ 6, ++ 3 ++}; ++ ++unsigned int ++ar531x_cpu_frequency(void) ++{ ++ static unsigned int ar531x_calculated_cpu_freq=0; ++ unsigned int clockCtl,pllcCtrl,cpuDiv; ++ unsigned int pllcOut,refdiv,fdiv,divby2; ++ ++ if(ar531x_calculated_cpu_freq) ++ return ar531x_calculated_cpu_freq; ++ ++ ++ pllcCtrl = sysRegRead(AR5315_PLLC_CTL); ++ refdiv = (pllcCtrl & PLLC_REF_DIV_M) >> PLLC_REF_DIV_S; ++ refdiv = CLOCKCTL1_PREDIVIDE_TABLE[refdiv]; ++ fdiv = (pllcCtrl & PLLC_FDBACK_DIV_M) >> PLLC_FDBACK_DIV_S; ++ divby2 = (pllcCtrl & PLLC_ADD_FDBACK_DIV_M) >> PLLC_ADD_FDBACK_DIV_S; ++ divby2 += 1; ++ pllcOut = (40000000/refdiv)*(2*divby2)*fdiv; ++ ++ clockCtl = sysRegRead(AR5315_CPUCLK); ++ ++ /* clkm input selected */ ++ if((clockCtl & CPUCLK_CLK_SEL_M) == 0 || (clockCtl & CPUCLK_CLK_SEL_M) == 1 ) { ++ unsigned int clkMdiv; ++ clkMdiv = (pllcCtrl & PLLC_CLKM_DIV_M) >> PLLC_CLKM_DIV_S; ++ clkMdiv = PLLC_DIVIDE_TABLE[clkMdiv]; ++ ++ cpuDiv = (clockCtl & CPUCLK_CLK_DIV_M) >> CPUCLK_CLK_DIV_S; ++ if(cpuDiv) cpuDiv *= 2; ++ else cpuDiv=1; ++ ++ ar531x_calculated_cpu_freq= (pllcOut/(clkMdiv * cpuDiv)) ; ++ ++ return ar531x_calculated_cpu_freq; ++ } ++ ++ /* clkc input selected */ ++ if((clockCtl & CPUCLK_CLK_SEL_M) == 2 ) { ++ unsigned int clkCdiv; ++ clkCdiv = (pllcCtrl & PLLC_CLKC_DIV_M) >> PLLC_CLKC_DIV_S; ++ clkCdiv = PLLC_DIVIDE_TABLE[clkCdiv]; ++ ++ cpuDiv = (clockCtl & CPUCLK_CLK_DIV_M) >> CPUCLK_CLK_DIV_S; ++ if(cpuDiv) cpuDiv *= 2; ++ else cpuDiv=1; ++ ++ ar531x_calculated_cpu_freq= (pllcOut/(clkCdiv * cpuDiv)) ; ++ ++ return ar531x_calculated_cpu_freq; ++ } else { /* ref_clk selected */ ++ ++ cpuDiv = (clockCtl & CPUCLK_CLK_DIV_M) >> CPUCLK_CLK_DIV_S; ++ if(cpuDiv) cpuDiv *= 2; ++ else cpuDiv=1; ++ ++ ar531x_calculated_cpu_freq= (40000000/(cpuDiv)) ; ++ return ar531x_calculated_cpu_freq; ++ } ++} ++ ++unsigned int ++ar531x_apb_frequency(void) ++{ ++ static unsigned int ar531x_calculated_cpu_freq=0; ++ unsigned int clockCtl,pllcCtrl,cpuDiv; ++ unsigned int pllcOut,refdiv,fdiv,divby2; ++ ++ if(ar531x_calculated_cpu_freq) ++ return ar531x_calculated_cpu_freq; ++ ++ ++ pllcCtrl = sysRegRead(AR5315_PLLC_CTL); ++ refdiv = (pllcCtrl & PLLC_REF_DIV_M) >> PLLC_REF_DIV_S; ++ refdiv = CLOCKCTL1_PREDIVIDE_TABLE[refdiv]; ++ fdiv = (pllcCtrl & PLLC_FDBACK_DIV_M) >> PLLC_FDBACK_DIV_S; ++ divby2 = (pllcCtrl & PLLC_ADD_FDBACK_DIV_M) >> PLLC_ADD_FDBACK_DIV_S; ++ divby2 += 1; ++ pllcOut = (40000000/refdiv)*(2*divby2)*fdiv; ++ ++ clockCtl = sysRegRead(AR5315_AMBACLK); ++ ++ /* clkm input selected */ ++ if((clockCtl & CPUCLK_CLK_SEL_M) == 0 || (clockCtl & CPUCLK_CLK_SEL_M) == 1 ) { ++ unsigned int clkMdiv; ++ clkMdiv = (pllcCtrl & PLLC_CLKM_DIV_M) >> PLLC_CLKM_DIV_S; ++ clkMdiv = PLLC_DIVIDE_TABLE[clkMdiv]; ++ ++ cpuDiv = (clockCtl & CPUCLK_CLK_DIV_M) >> CPUCLK_CLK_DIV_S; ++ if(cpuDiv) cpuDiv *= 2; ++ else cpuDiv=1; ++ ++ ar531x_calculated_cpu_freq= (pllcOut/(clkMdiv * cpuDiv)) ; ++ ++ return ar531x_calculated_cpu_freq; ++ } ++ ++ /* clkc input selected */ ++ if((clockCtl & CPUCLK_CLK_SEL_M) == 2 ) { ++ unsigned int clkCdiv; ++ clkCdiv = (pllcCtrl & PLLC_CLKC_DIV_M) >> PLLC_CLKC_DIV_S; ++ clkCdiv = PLLC_DIVIDE_TABLE[clkCdiv]; ++ ++ cpuDiv = (clockCtl & CPUCLK_CLK_DIV_M) >> CPUCLK_CLK_DIV_S; ++ if(cpuDiv) cpuDiv *= 2; ++ else cpuDiv=1; ++ ++ ar531x_calculated_cpu_freq= (pllcOut/(clkCdiv * cpuDiv)) ; ++ ++ return ar531x_calculated_cpu_freq; ++ } else { /* ref_clk selected */ ++ ++ cpuDiv = (clockCtl & CPUCLK_CLK_DIV_M) >> CPUCLK_CLK_DIV_S; ++ if(cpuDiv) cpuDiv *= 2; ++ else cpuDiv=1; ++ ++ ar531x_calculated_cpu_freq= (40000000/(cpuDiv)) ; ++ return ar531x_calculated_cpu_freq; ++ } ++} ++ ++#else ++unsigned int ++ar531x_cpu_frequency(void) ++{ ++ static unsigned int ar531x_calculated_cpu_freq; ++ unsigned int clockctl1_predivide_mask; ++ unsigned int clockctl1_predivide_shift; ++ unsigned int clockctl1_multiplier_mask; ++ unsigned int clockctl1_multiplier_shift; ++ unsigned int clockctl1_doubler_mask; ++ int wisoc_revision; ++ ++ /* ++ * Trust the bootrom's idea of cpu frequency. ++ */ ++ ar531x_calculated_cpu_freq = sysRegRead(AR5312_SCRATCH); ++ if (ar531x_calculated_cpu_freq) ++ return ar531x_calculated_cpu_freq; ++ ++ wisoc_revision = (sysRegRead(AR531X_REV) & AR531X_REV_MAJ) >> AR531X_REV_MAJ_S; ++ ++ if (wisoc_revision == AR531X_REV_MAJ_AR2313) { ++ clockctl1_predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK; ++ clockctl1_predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT; ++ clockctl1_multiplier_mask = AR2313_CLOCKCTL1_MULTIPLIER_MASK; ++ clockctl1_multiplier_shift = AR2313_CLOCKCTL1_MULTIPLIER_SHIFT; ++ clockctl1_doubler_mask = AR2313_CLOCKCTL1_DOUBLER_MASK; ++ } else { /* AR5312 and AR2312 */ ++ clockctl1_predivide_mask = AR5312_CLOCKCTL1_PREDIVIDE_MASK; ++ clockctl1_predivide_shift = AR5312_CLOCKCTL1_PREDIVIDE_SHIFT; ++ clockctl1_multiplier_mask = AR5312_CLOCKCTL1_MULTIPLIER_MASK; ++ clockctl1_multiplier_shift = AR5312_CLOCKCTL1_MULTIPLIER_SHIFT; ++ clockctl1_doubler_mask = AR5312_CLOCKCTL1_DOUBLER_MASK; ++ } ++ ++ /* ++ * Clocking is derived from a fixed 40MHz input clock. ++ * cpuFreq = InputClock * MULT (where MULT is PLL multiplier) ++ * ++ * sysFreq = cpuFreq / 4 (used for APB clock, serial, ++ * flash, Timer, Watchdog Timer) ++ * ++ * cntFreq = cpuFreq / 2 (use for CPU count/compare) ++ * ++ * So, for example, with a PLL multiplier of 5, we have ++ * cpuFrez = 200MHz ++ * sysFreq = 50MHz ++ * cntFreq = 100MHz ++ * ++ * We compute the CPU frequency, based on PLL settings. ++ */ ++ if (ar531x_calculated_cpu_freq == 0) { ++ unsigned int clockCtl1 = sysRegRead(AR5312_CLOCKCTL1); ++ ++ int preDivideSelect = (clockCtl1 & clockctl1_predivide_mask) >> ++ clockctl1_predivide_shift; ++ ++ int preDivisor = CLOCKCTL1_PREDIVIDE_TABLE[preDivideSelect]; ++ ++ int multiplier = (clockCtl1 & clockctl1_multiplier_mask) >> ++ clockctl1_multiplier_shift; ++ ++ if (clockCtl1 & clockctl1_doubler_mask) { ++ multiplier = multiplier << 1; ++ } ++ ++ ar531x_calculated_cpu_freq = (40000000 / preDivisor) * multiplier; ++ } ++ ++ return ar531x_calculated_cpu_freq; ++} ++#endif ++ ++unsigned int ++ar531x_sys_frequency(void) ++{ ++ static unsigned int ar531x_calculated_sys_freq = 0; ++ ++ if (ar531x_calculated_sys_freq == 0) { ++ ar531x_calculated_sys_freq = ar531x_cpu_frequency() / 4; ++ } ++ ++ return ar531x_calculated_sys_freq; ++} ++ ++static void __init ++flash_setup(void) ++{ ++ UINT32 flash_ctl; ++#ifndef CONFIG_AR5315 ++ /* Configure flash bank 0 */ ++ flash_ctl = FLASHCTL_E | ++ FLASHCTL_AC_8M | ++ FLASHCTL_RBLE | ++ (0x01 << FLASHCTL_IDCY_S) | ++ (0x07 << FLASHCTL_WST1_S) | ++ (0x07 << FLASHCTL_WST2_S) | ++ (sysRegRead(AR531X_FLASHCTL0) & FLASHCTL_MW); ++ ++ sysRegWrite(AR531X_FLASHCTL0, flash_ctl); ++ ++ /* Disable other flash banks */ ++ sysRegWrite(AR531X_FLASHCTL1, ++ sysRegRead(AR531X_FLASHCTL1) & ~(FLASHCTL_E | FLASHCTL_AC)); ++ ++ sysRegWrite(AR531X_FLASHCTL2, ++ sysRegRead(AR531X_FLASHCTL2) & ~(FLASHCTL_E | FLASHCTL_AC)); ++#endif ++} ++ ++ ++ ++void __init ++serial_setup(void) ++{ ++ struct serial_struct s; ++ ++ memset(&s, 0, sizeof(s)); ++ ++ s.flags = STD_COM_FLAGS; ++ s.io_type = SERIAL_IO_MEM; ++#if CONFIG_AR5315 ++ s.baud_base = ar531x_apb_frequency()/16; ++#else ++ s.baud_base = ar531x_sys_frequency()/16; ++#endif ++ s.irq = AR531X_MISC_IRQ_UART0; ++ s.iomem_reg_shift = 2; ++#if CONFIG_AR5315 ++ s.iomem_base = (u8 *)AR5315_UART0; ++#else ++ s.iomem_base = (u8 *)AR531X_UART0; ++#endif ++ ++ if (early_serial_setup(&s) != 0) ++ printk(KERN_ERR "early_serial_setup failed\n"); ++} ++ ++extern int setup_irq(unsigned int irq, struct irqaction *irqaction); ++static void __init ++ar531x_timer_setup(struct irqaction *irq) ++{ ++ unsigned int count; ++ ++ /* Usually irq is timer_irqaction (timer_interrupt) */ ++ setup_irq(AR531X_IRQ_CPU_CLOCK, irq); ++ ++ /* to generate the first CPU timer interrupt */ ++ count = read_c0_count(); ++ write_c0_compare(count + 1000); ++} ++ ++extern void (*board_time_init)(void); ++ ++static void __init ++ar531x_time_init(void) ++{ ++ mips_hpt_frequency = ar531x_cpu_frequency() / 2; ++} ++ ++void __init ++ar531x_setup(void) ++{ ++ /* Clear any lingering AHB errors */ ++#if CONFIG_AR5315 ++ unsigned int config = read_c0_config(); ++ write_c0_config(config & ~0x3); ++ sysRegWrite(AR5315_AHB_ERR0,AHB_ERROR_DET); ++ sysRegRead(AR5315_AHB_ERR1); ++ sysRegWrite(AR5315_WDC, WDC_IGNORE_EXPIRATION); ++#else ++ sysRegRead(AR531X_PROCADDR); ++ sysRegRead(AR531X_DMAADDR); ++ ++ sysRegWrite(AR531X_WD_CTRL, AR531X_WD_CTRL_IGNORE_EXPIRATION); ++ ++#endif ++ ++ /* Disable data watchpoints */ ++ write_c0_watchlo0(0); ++ ++ board_time_init = ar531x_time_init; ++ board_timer_setup = ar531x_timer_setup; ++ ++ _machine_restart = ar531x_restart; ++ _machine_halt = ar531x_halt; ++ _machine_power_off = ar531x_power_off; ++ ++ flash_setup(); ++ serial_setup(); ++} +diff -urN linux-mips/arch/mips/ar531x/Makefile mips-linux-2.4.25/arch/mips/ar531x/Makefile +--- linux-mips/arch/mips/ar531x/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ mips-linux-2.4.25/arch/mips/ar531x/Makefile 2005-12-30 17:26:29.912989328 +0000 +@@ -0,0 +1,33 @@ ++# ++# This file is subject to the terms and conditions of the GNU General Public ++# License. See the file "COPYING" in the main directory of this archive ++# for more details. ++# ++# Copyright © 2003 Atheros Communications, Inc., All Rights Reserved. ++# ++ ++# Makefile for Atheros ar531x boards ++# ++# Note! Dependencies are done automagically by 'make dep', which also ++# removes any old dependencies. DON'T put your own dependencies here ++# unless it's something special (ie not a .c file). ++# ++ ++.S.s: ++ $(CPP) $(CFLAGS) $< -o $*.s ++.S.o: ++ $(CC) $(CFLAGS) -D__ASSEMBLY__ -c $< -o $*.o ++ ++O_TARGET:= ar531x.o ++ ++export-objs = ar531xksyms.o ++ ++obj-y := ar531xdbg_io.o \ ++ ar531xsetup.o \ ++ ar531xprom.o \ ++ ar531xirq.o \ ++ ar531xintr.o \ ++ ar531xgpio.o \ ++ ar531xksyms.o ++ ++include $(TOPDIR)/Rules.make +diff -urN linux-mips/arch/mips/ar531x/README mips-linux-2.4.25/arch/mips/ar531x/README +--- linux-mips/arch/mips/ar531x/README 1970-01-01 01:00:00.000000000 +0100 ++++ mips-linux-2.4.25/arch/mips/ar531x/README 2005-12-30 17:26:30.478903296 +0000 +@@ -0,0 +1,68 @@ ++Basic information for the AR531X Board Support Package ++ ++This directory contains the "LBSP" -- Linux Board Support Package -- ++for Linux on the Atheros AR531X Wireless System-On-a-Chip. It is intended ++primarily as a building block for wireless products. At this time, the ++AR531X Linux BSP is experimental code, and is actively UNDER CONSTRUCTION. ++ ++Some components that are supported by this LBSP along with a standard 2.4 ++Linux MIPS kernel include ++ R4Kc CPU ++ instruction and data caches ++ SDRAM ++ flash (Macronix, AMD, STS, etc.) ++ 16550 serial port ++ ethernet MACs ++ ethernet PHY or PHY Switch (RealTek, Kendin, Marvell) ++ General-Purpose I/O pins ++ kernel debugging with kgdb ++ ++This LBSP code does NOT include drivers for the wireless components of the ++chip/boards! Drivers for those components may be distributed separately. ++In particular, the MADWiFi project under SourceForge supports (not yet!) ++wireless functions on the AR531X chipset. See ++ http://www.sourceforge.net/projects/madwifi ++ ++Files included in this BSP: ++ae531xlnx.c - Linux-specific portions of the ethernet driver ++ae531xmac.c - OS-independent AR531X ethernet MAC code ++ae531xmac.h - OS-independent AR531X ethernet MAC software definitions ++ae531xreg.h - OS-independent AR531X ethernet MAC hardware definitions ++ar531x.h - OS-independent AR531X system hardware definitions ++ar531xlnx.h - Linux-specific AR531X system definitions and externs ++defconfig-ar531x - Default Linux configuration file ++intr_recv.S - Linux interrupt "glue" code ++ar531xirq.c - Linux Interrupt Request management ++Makefile - Linux makefile ++mvPhy.c - OS-independent ethernet PHY code for Marvell Switch ++mvPhy.h - OS-independent ethernet PHY definitions for Marvell Switch ++ar531xprom.c - Linux prom "glue" code ++ar531xsetup.c - Linux startup code ++ar531xdbg_io.c - Support for kgdb-based debugging and for EARLY_PRINTK_HACK ++ar531xproc.c - Pseudo-device driver for /proc/ar531x device ++ar531xgpio.c - Support for General Purpose I/O pins ++ar531xwmacsl.c - Wireless MAC Support Layer ++ ++Additional files, distributed with the BSP: ++README - This file ++README.BUILD - Instructions for building a linux kernel from source ++README.EXECUTE - Instructions for testing your linux kernel ++README.RAMDISK - Instructions for building a root ramdisk image ++ ++ramdisk.gz - A binary ramdisk image, suitable for use with AR531X. ++DIFFS - Directory that contains "patch" files (See README.BUILD) ++ ++ ++There are several ways to boot a vmlinux image on an AR531X board: ++ -You can boot in over ethernet from the vxWorks bootrom, which is preloaded ++ on all Atheros boards ++ -You can use an ICE (e.g. VisionICE) to load the vmlinux image. You will ++ need appropriate register initialization (e.g. AP30.ini file) ++ -You can use the eCos RedBoot bootrom loader. This is a full-featured ++ bootrom which as been ported to AR531x. It can boot vmlinux over ethernet ++ or from flash. Source code is available from Atheros. ++ ++Please send comments, corrections, complaints, criticisms, suggestions, ++enhancements, requests, or any other reasonable communications regarding ++this effort, to "linux@atheros.com". Your email will be received by a ++couple of engineers, and redirected as appropriate. +diff -urN linux-mips/arch/mips/ar531x/README.BUILD mips-linux-2.4.25/arch/mips/ar531x/README.BUILD +--- linux-mips/arch/mips/ar531x/README.BUILD 1970-01-01 01:00:00.000000000 +0100 ++++ mips-linux-2.4.25/arch/mips/ar531x/README.BUILD 2005-12-30 17:26:30.478903296 +0000 +@@ -0,0 +1,47 @@ ++ How to BUILD a linux kernel for an AR531X system ++ ++It is expected that you will build Linux on an existing Linux system, which ++has all of the standard Linux tools. ++ ++01) Obtain a MIPS BigEndian ELF gcc-compatible toolchain. For example, ++ if you're cross-compiling on a x86 Linux system, you could use: ++ ftp://ftp.mips.com/pub/tools/software/sde-for-linux/sdelinux-5.01-4eb.i386.rpm ++ ++02) Obtain the latest working MIPS Linux kernel ++ cvs -d :pserver:cvs@ftp.linux-mips.org:/home/cvs login (password "cvs") ++ cvs -d :pserver:cvs@ftp.linux-mips.org:/home/cvs co -r linux_2_4 linux ++ ++ Now "cd linux". The remainder of these instructions assume ++ that you are in the linux directory. ++ ++03) Place the contents of this directory at arch/mips/ar531x. ++ ++04) Use the patch command to patch generic linux files according ++ to the DIFFS directory ++ for i in arch/mips/ar531x/DIFFS/*.diff ++ do ++ patch -p1 < $i ++ done ++ NOTE: This version of the AR531X Linux BSP was tested with ++ MIPS Linux 2.4.22 as of 11/14/03. If you use a different ++ (e.g. more recent) version of Linux source, you may need to ++ resolve some minor patch and compilation issues. ++ ++05) Set up a RAMDISK image. ++ See the instructions in README.RAMDISK. ++ ++06) Set up a linux configuration using ar531x/defconfig-ar531x. ++ cp arch/mips/ar531x/defconfig-ar531x .config ++ make oldconfig (answer all questions that are asked) ++ NOTE: For development/debug purposes, you may want to ++ enable CONFIG_RUNTIME_DEBUG and CONFIG_KGDB. ++ ++07) Make dependencies. ++ make dep ++ ++08) Build the linux kernel ++ make ++ ++09) The linux image you just built is in vmlinux. ++ See instructions in README.EXECUTE to run your vmlinux ++ image on an AP531X-based board. +diff -urN linux-mips/arch/mips/ar531x/README.EXECUTE mips-linux-2.4.25/arch/mips/ar531x/README.EXECUTE +--- linux-mips/arch/mips/ar531x/README.EXECUTE 1970-01-01 01:00:00.000000000 +0100 ++++ mips-linux-2.4.25/arch/mips/ar531x/README.EXECUTE 2005-12-30 17:26:30.479903144 +0000 +@@ -0,0 +1,23 @@ ++ How to EXECUTE a linux image on an AR531X system ++ ++There are currently three ways to run you vmlinux image: ++ 1) Load it using the vxWorks bootrom that is supplied with the board. ++ You can load it over ethernet or from the TFFS file system, if you ++ have sufficient flash to store the image. ++ 2) Load it using an ICE (e.g. VisionICE). ++ 3) Use a bootrom loader, such as eCos RedBoot. ++ ++After you have booted linux: ++ By default, the root filesystem on ramdisk is read-only. ++ To make it writable, use "mount -o remount w /". ++ ++ The user-level commands are slightly non-standard, as they ++ are based on "busybox". ++ ++ The "wget" command is included. You can use wget to fetch ++ files from any ftp server. So, for instance, you can fetch ++ a kernel module and then "insmod" it. ++ ++Note that the standard source-level kernel debugger, kgdb, works well ++over the serial line with this port. We use kgdb and the kgdb_demux perl ++script -- available over the www -- for debugging. +diff -urN linux-mips/arch/mips/ar531x/README.VERSION mips-linux-2.4.25/arch/mips/ar531x/README.VERSION +--- linux-mips/arch/mips/ar531x/README.VERSION 1970-01-01 01:00:00.000000000 +0100 ++++ mips-linux-2.4.25/arch/mips/ar531x/README.VERSION 2005-12-30 17:26:30.479903144 +0000 +@@ -0,0 +1 @@ ++Source release last modified: 12/16/03 +diff -urN linux-mips/arch/mips/config-shared.in mips-linux-2.4.25/arch/mips/config-shared.in +--- linux-mips/arch/mips/config-shared.in 2005-12-24 15:11:15.963885864 +0000 ++++ mips-linux-2.4.25/arch/mips/config-shared.in 2005-12-30 17:26:31.611731080 +0000 +@@ -34,6 +34,7 @@ + dep_bool 'Support for Alchemy PB1550 board' CONFIG_MIPS_PB1550 $CONFIG_MIPS32 + dep_bool 'Support for Alchemy PB1200 board' CONFIG_MIPS_PB1200 $CONFIG_MIPS32 + dep_bool 'Support for Alchemy Hydrogen3 board' CONFIG_MIPS_HYDROGEN3 $CONFIG_MIPS32 ++dep_bool 'Support for Atheros AR5312/AR2312 WiSoC (EXPERIMENTAL)' CONFIG_AR531X $CONFIG_AR531X $CONFIG_EXPERIMENTAL + dep_bool 'Support for MyCable XXS1500 board' CONFIG_MIPS_XXS1500 $CONFIG_MIPS32 + dep_bool 'Support for 4G Systems MTX-1 board' CONFIG_MIPS_MTX1 $CONFIG_MIPS32 + dep_bool 'Support for Cogent CSB250 board' CONFIG_COGENT_CSB250 $CONFIG_MIPS32 +@@ -238,6 +239,63 @@ + define_bool CONFIG_PC_KEYB y + define_bool CONFIG_OLD_TIME_C y + fi ++if [ "$CONFIG_AR531X" = "y" ]; then ++ define_bool CONFIG_IRQ_CPU y ++ define_bool CONFIG_CPU_R4X00 y ++ define_bool CONFIG_SERIAL y ++ define_bool CONFIG_NEW_IRQ y ++ define_bool CONFIG_NEW_TIME_C y ++ define_bool CONFIG_AR5312 ++ define_bool CONFIG_NONCOHERENT_IO y ++ bool 'Enable early printk hack' CONFIG_EARLY_PRINTK_HACK ++ define_bool CONFIG_SCSI n ++ mainmenu_option next_comment ++ comment 'Board selection' ++ choice 'Board type' \ ++ "UNKNOWN CONFIG_APUNKNOWN \ ++ AP30 CONFIG_AP30 \ ++ AP31 CONFIG_AP31 \ ++ AP33 CONFIG_AP33 \ ++ AP38 CONFIG_AP38 \ ++ AP43 CONFIG_AP43 \ ++ AP48 CONFIG_AP48 \ ++ AP51 CONFIG_AP51 \ ++ AP30-ASK CONFIG_AP30ASK" AP30 ++ if [ "$CONFIG_AP30" = "y" -o "$CONFIG_AP30ASK" = "y" ]; then ++ define_int CONFIG_MTD_PHYSMAP_BUSWIDTH 2 ++ fi ++ if [ "$CONFIG_AP33" = "y" ]; then ++ define_int CONFIG_MTD_PHYSMAP_BUSWIDTH 1 ++ fi ++ if [ "$CONFIG_AP38" = "y" ]; then ++ define_int CONFIG_MTD_PHYSMAP_BUSWIDTH 1 ++ fi ++ if [ "$CONFIG_AP43" = "y" ]; then ++ define_int CONFIG_MTD_PHYSMAP_BUSWIDTH 1 ++ fi ++ if [ "$CONFIG_AP48" = "y" ]; then ++ define_int CONFIG_MTD_PHYSMAP_BUSWIDTH 1 ++ fi ++ if [ "$CONFIG_AP51" = "y" ]; then ++ define_int CONFIG_MTD_PHYSMAP_BUSWIDTH 1 ++ define_bool CONFIG_MTD_REDBOOT_PARTS y ++ define_bool CONFIG_AR5315 y ++ define_bool CONFIG_MTD_SPIFLASH y ++ define_bool CONFIG_MTD_CFI n ++ define_bool CONFIG_MTD_JEDECPROBE n ++ define_bool CONFIG_MTD_CFI_INTELEXT n ++ define_bool CONFIG_MTD_CFI_AMDSTD n ++ define_bool CONFIG_MTD_OBSOLETE_CHIPS n ++ define_bool CONFIG_MTD_AMDSTD n ++ define_bool CONFIG_MTD_JEDEC n ++ define_bool CONFIG_MTD_PHYSMAP n ++ fi ++ mainmenu_option next_comment ++ comment 'Flash Selection' ++ choice 'Flash Size' \ ++ "2MB CONFIG_FLASH_2MB \ ++ 4MB CONFIG_FLASH_4MB" 2MB ++fi + if [ "$CONFIG_CASIO_E55" = "y" ]; then + define_bool CONFIG_IRQ_CPU y + define_bool CONFIG_NEW_TIME_C y + +diff -urN linux-mips/arch/mips/kernel/setup.c mips-linux-2.4.25/arch/mips/kernel/setup.c +--- linux-mips/arch/mips/kernel/setup.c 2005-12-24 15:11:16.188851664 +0000 ++++ mips-linux-2.4.25/arch/mips/kernel/setup.c 2005-12-30 17:26:33.536438480 +0000 +@@ -496,6 +496,7 @@ + void hp_setup(void); + void au1x00_setup(void); + void frame_info_init(void); ++ void ar531x_setup(void); + + frame_info_init(); + #if defined(CONFIG_BLK_DEV_FD) || defined(CONFIG_BLK_DEV_FD_MODULE) +@@ -693,6 +694,12 @@ + pmc_yosemite_setup(); + break; + #endif ++ ++#ifdef CONFIG_AR531X ++ case MACH_GROUP_AR531X: ++ ar531x_setup(); ++ break; ++#endif + default: + panic("Unsupported architecture"); + } +diff -urN linux-mips/arch/mips/Makefile mips-linux-2.4.25/arch/mips/Makefile +--- linux-mips/arch/mips/Makefile 2005-12-24 15:11:15.903894984 +0000 ++++ mips-linux-2.4.25/arch/mips/Makefile 2005-12-30 17:26:29.911989480 +0000 +@@ -701,6 +701,17 @@ + LOADADDR += 0x80020000 + endif + ++ifdef CONFIG_AR531X ++SUBDIRS += arch/mips/ar531x ++LIBS += arch/mips/ar531x/ar531x.o ++ifdef CONFIG_AP51 ++LOADADDR += 0x80041000 ++else ++LOADADDR += 0x80002000 ++endif ++ ++endif ++ + # + # Choosing incompatible machines durings configuration will result in + # error messages during linking. Select a default linkscript if +diff -urN linux-mips/ath_version.mk mips-linux-2.4.25/ath_version.mk +--- linux-mips/ath_version.mk 1970-01-01 01:00:00.000000000 +0100 ++++ mips-linux-2.4.25/ath_version.mk 2005-12-30 17:27:00.579327336 +0000 +@@ -0,0 +1 @@ ++EXTRAVERSION=-LSDK-5.0.0-RC5 +diff -urN linux-mips/drivers/char/serial.c mips-linux-2.4.25/drivers/char/serial.c +--- linux-mips/drivers/char/serial.c 2005-12-24 15:11:21.796999096 +0000 ++++ mips-linux-2.4.25/drivers/char/serial.c 2005-12-30 17:27:10.815771160 +0000 +@@ -3441,7 +3441,7 @@ + + static _INLINE_ void show_serial_version(void) + { +- printk(KERN_INFO "%s version %s%s (%s) with%s", serial_name, ++ printk(KERN_INFO "%s version %s%s (%s) with%s\n", serial_name, + serial_version, LOCAL_VERSTRING, serial_revdate, + serial_options); + } +@@ -5567,7 +5567,7 @@ + printk(KERN_INFO"ttyS%02d%s at 0x%p (irq = %d) is a %s\n", + state->line + SERIAL_DEV_OFFSET, + (state->flags & ASYNC_FOURPORT) ? " FourPort" : "", +- state->iomem_base, state->irq, ++ (void *)state->iomem_base, state->irq, + uart_config[state->type].name); + } + else { +diff -urN linux-mips/drivers/mtd/chips/cfi_cmdset_0002.c mips-linux-2.4.25/drivers/mtd/chips/cfi_cmdset_0002.c +--- linux-mips/drivers/mtd/chips/cfi_cmdset_0002.c 2005-12-24 15:11:25.102496584 +0000 ++++ mips-linux-2.4.25/drivers/mtd/chips/cfi_cmdset_0002.c 2005-12-30 17:27:21.333172272 +0000 +@@ -511,7 +511,7 @@ + or tells us why it failed. */ + dq6 = CMD(1<<6); + dq5 = CMD(1<<5); +- timeo = jiffies + (HZ/1000); /* setting timeout to 1ms for now */ ++ timeo = jiffies + (HZ/1000) + 1; /* setting timeout to 1ms for now */ + + oldstatus = cfi_read(map, adr); + status = cfi_read(map, adr); +@@ -536,16 +536,18 @@ + if( (status & dq5) == dq5 ) { + /* When DQ5 raises, we must check once again + if DQ6 is toggling. If not, the erase has been +- completed OK. If not, reset chip. */ ++ completed OK. But if so, reset chip. */ + oldstatus = cfi_read(map, adr); + status = cfi_read(map, adr); + + if ( (oldstatus & 0x00FF) == (status & 0x00FF) ) { ++#if 0 + printk(KERN_WARNING "Warning: DQ5 raised while program operation was in progress, however operation completed OK\n" ); ++#endif + } else { + /* DQ5 is active so we can do a reset and stop the erase */ + cfi_write(map, CMD(0xF0), chip->start); +- printk(KERN_WARNING "Internal flash device timeout occurred or write operation was performed while flash was programming.\n" ); ++ printk(KERN_WARNING "Internal flash device timeout pt A occurred or write operation was performed while flash was programming. timeout=%d\n",chip->word_write_time ); + } + } else { + printk(KERN_WARNING "Waiting for write to complete timed out in do_write_oneword."); +@@ -959,7 +961,7 @@ + { + /* DQ5 is active so we can do a reset and stop the erase */ + cfi_write(map, CMD(0xF0), chip->start); +- printk( KERN_WARNING "Internal flash device timeout occured or write operation was performed while flash was erasing\n" ); ++ printk( KERN_WARNING "Internal flash device timeout pt B occured or write operation was performed while flash was erasing\n" ); + } + } + else +diff -urN linux-mips/drivers/mtd/chips/cfi_probe.c mips-linux-2.4.25/drivers/mtd/chips/cfi_probe.c +--- linux-mips/drivers/mtd/chips/cfi_probe.c 2005-12-24 15:11:25.103496432 +0000 ++++ mips-linux-2.4.25/drivers/mtd/chips/cfi_probe.c 2005-12-30 17:27:21.507145824 +0000 +@@ -51,7 +51,7 @@ + struct flchip *chips, struct cfi_private *cfi) + { + int i; +- ++ + if ((base + 0) >= map->size) { + printk(KERN_NOTICE + "Probe at base[0x00](0x%08lx) past the end of the map(0x%08lx)\n", +@@ -221,12 +221,10 @@ + + static void print_cfi_ident(struct cfi_ident *cfip) + { +-#if 0 + if (cfip->qry[0] != 'Q' || cfip->qry[1] != 'R' || cfip->qry[2] != 'Y') { + printk("Invalid CFI ident structure.\n"); + return; + } +-#endif + printk("Primary Vendor Command Set: %4.4X (%s)\n", cfip->P_ID, vendorname(cfip->P_ID)); + if (cfip->P_ADR) + printk("Primary Algorithm Table at %4.4X\n", cfip->P_ADR); +diff -urN linux-mips/drivers/mtd/chips/jedec_probe.c mips-linux-2.4.25/drivers/mtd/chips/jedec_probe.c +--- linux-mips/drivers/mtd/chips/jedec_probe.c 2005-12-24 15:11:25.126492936 +0000 ++++ mips-linux-2.4.25/drivers/mtd/chips/jedec_probe.c 2005-12-30 17:27:21.532142024 +0000 +@@ -104,6 +104,7 @@ + #define SST29LE512 0x003d + #define SST39LF800 0x2781 + #define SST39LF160 0x2782 ++#define SST39LF1601 0x234b + #define SST39LF512 0x00D4 + #define SST39LF010 0x00D5 + #define SST39LF020 0x00D6 +@@ -113,6 +114,8 @@ + #define SST49LF030A 0x001C + #define SST49LF040A 0x0051 + #define SST49LF080A 0x005B ++#define SST39VF3201 0x235B ++#define SST39VF3202 0x235A + + /* Toshiba */ + #define TC58FVT160 0x00C2 +@@ -900,7 +903,43 @@ + NumEraseRegions: 1, + regions: {ERASEINFO(0x01000,256), + } +- } ++ }, { ++ mfr_id: MANUFACTURER_SST, ++ dev_id: SST39LF160, ++ name: "SST 39LF160", ++ DevSize: SIZE_2MiB, ++ CmdSet: P_ID_AMD_STD, ++ NumEraseRegions: 1, ++ regions: {ERASEINFO(0x01000,512), ++ } ++ }, { ++ mfr_id: MANUFACTURER_SST, ++ dev_id: SST39LF1601, ++ name: "SST 39LF1601", ++ DevSize: SIZE_2MiB, ++ CmdSet: P_ID_AMD_STD, ++ NumEraseRegions: 1, ++ regions: {ERASEINFO(0x01000,512), ++ } ++ }, { ++ mfr_id: MANUFACTURER_SST, ++ dev_id: SST39VF3201, ++ name: "SST 39VF3201", ++ DevSize: SIZE_4MiB, ++ CmdSet: P_ID_AMD_STD, ++ NumEraseRegions: 1, ++ regions: {ERASEINFO(0x01000,1024), ++ } ++ }, { ++ mfr_id: MANUFACTURER_SST, ++ dev_id: SST39VF3202, ++ name: "SST 39VF3202", ++ DevSize: SIZE_4MiB, ++ CmdSet: P_ID_AMD_STD, ++ NumEraseRegions: 1, ++ regions: {ERASEINFO(0x01000,1024), ++ } ++ } + }; + + +@@ -967,6 +1006,35 @@ + p_cfi->cfiq->DevSize = jedec_table[index].DevSize; + p_cfi->cfi_mode = CFI_MODE_JEDEC; + ++ /* ++ * Add the following code to set the flash timing parameters. ++ * Maybe this is done in a table somwehere else? I can't find it. ++ */ ++ ++ ++ switch(jedec_table[index].dev_id) { ++ case SST39VF3201: ++ case SST39VF3202: ++ p_cfi->cfiq->WordWriteTimeoutTyp = 3; /* 8 us */ ++ p_cfi->cfiq->WordWriteTimeoutMax = 4; /* 16 us */ ++ p_cfi->cfiq->BlockEraseTimeoutTyp = 15; /* Actually 18ms, max 25 */ ++ p_cfi->cfiq->BlockEraseTimeoutMax = 15; /* Actually 25ms */ ++ p_cfi->cfiq->ChipEraseTimeoutTyp = 16; /* Max is 50ms, typical is 40ms */ ++ p_cfi->cfiq->ChipEraseTimeoutMax = 16; ++ break; ++ case SST39LF160: ++ case SST39LF1601: ++ p_cfi->cfiq->WordWriteTimeoutTyp = 4; /* 14 us */ ++ p_cfi->cfiq->WordWriteTimeoutMax = 5; /* 20 us */ ++ p_cfi->cfiq->BlockEraseTimeoutTyp = 15; /* Actually 18ms, max 25 */ ++ p_cfi->cfiq->BlockEraseTimeoutMax = 15; /* Actually 25ms */ ++ p_cfi->cfiq->ChipEraseTimeoutTyp = 17; /* Max is 70ms, typical is 40ms */ ++ p_cfi->cfiq->ChipEraseTimeoutMax = 17; ++ break; ++ } ++ ++ ++ + for (i=0; icfiq->EraseRegionInfo[i] = jedec_table[index].regions[i]; + } +diff -urN linux-mips/drivers/mtd/Config.in mips-linux-2.4.25/drivers/mtd/Config.in +--- linux-mips/drivers/mtd/Config.in 2005-12-24 15:11:25.091498256 +0000 ++++ mips-linux-2.4.25/drivers/mtd/Config.in 2005-12-30 17:27:21.182195224 +0000 +@@ -14,6 +14,9 @@ + dep_tristate ' MTD partitioning support' CONFIG_MTD_PARTITIONS $CONFIG_MTD + dep_tristate ' MTD concatenating support' CONFIG_MTD_CONCAT $CONFIG_MTD + dep_tristate ' RedBoot partition table parsing' CONFIG_MTD_REDBOOT_PARTS $CONFIG_MTD_PARTITIONS ++ if [ "$CONFIG_MTD_END_RESERVED" != "" ]; then ++ define_int CONFIG_MTD_END_RESERVED $CONFIG_MTD_END_RESERVED ++ fi + dep_tristate ' Command line partition table parsing' CONFIG_MTD_CMDLINE_PARTS $CONFIG_MTD_PARTITIONS + if [ "$CONFIG_ARM" = "y" ]; then + dep_tristate ' ARM Firmware Suite partition parsing' CONFIG_MTD_AFS_PARTS $CONFIG_MTD_PARTITIONS +diff -urN linux-mips/drivers/mtd/devices/Makefile mips-linux-2.4.25/drivers/mtd/devices/Makefile +--- linux-mips/drivers/mtd/devices/Makefile 2005-12-24 15:11:25.128492632 +0000 ++++ mips-linux-2.4.25/drivers/mtd/devices/Makefile 2005-12-30 17:27:21.561137616 +0000 +@@ -22,5 +22,6 @@ + obj-$(CONFIG_MTD_MTDRAM) += mtdram.o + obj-$(CONFIG_MTD_LART) += lart.o + obj-$(CONFIG_MTD_BLKMTD) += blkmtd.o ++obj-$(CONFIG_MTD_SPIFLASH) += spiflash.o + + include $(TOPDIR)/Rules.make +diff -urN linux-mips/drivers/mtd/devices/spiflash.c mips-linux-2.4.25/drivers/mtd/devices/spiflash.c +--- linux-mips/drivers/mtd/devices/spiflash.c 1970-01-01 01:00:00.000000000 +0100 ++++ mips-linux-2.4.25/drivers/mtd/devices/spiflash.c 2005-12-30 17:27:21.652123784 +0000 +@@ -0,0 +1,506 @@ ++ ++/* ++ * MTD driver for the SPI Flash Memory support. ++ * ++ * $Id: //depot/sw/releases/linuxsrc/src/kernels/mips-linux-2.4.25/drivers/mtd/devices/spiflash.c#3 $ ++ * ++ * ++ * Copyright (c) 2005-2006 Atheros Communications Inc. ++ * ++ * This code is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++/*=========================================================================== ++** !!!! VERY IMPORTANT NOTICE !!!! FLASH DATA STORED IN LITTLE ENDIAN FORMAT ++** ++** This module contains the Serial Flash access routines for the Atheros SOC. ++** The Atheros SOC integrates a SPI flash controller that is used to access ++** serial flash parts. The SPI flash controller executes in "Little Endian" ++** mode. THEREFORE, all WRITES and READS from the MIPS CPU must be ++** BYTESWAPPED! The SPI Flash controller hardware by default performs READ ++** ONLY byteswapping when accessed via the SPI Flash Alias memory region ++** (Physical Address 0x0800_0000 - 0x0fff_ffff). The data stored in the ++** flash sectors is stored in "Little Endian" format. ++** ++** The spiflash_write() routine performs byteswapping on all write ++** operations. ++**===========================================================================*/ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include "spiflash.h" ++ ++/* debugging */ ++/* #define SPIFLASH_DEBUG */ ++ ++#ifndef __BIG_ENDIAN ++#error This driver currently only works with big endian CPU. ++#endif ++ ++static char module_name[] = "spiflash"; ++ ++#define MIN(a,b) ((a) < (b) ? (a) : (b)) ++#define FALSE 0 ++#define TRUE 1 ++ ++#define ROOTFS_NAME "rootfs" ++ ++static __u32 spiflash_regread32(int reg); ++static void spiflash_regwrite32(int reg, __u32 data); ++static __u32 spiflash_sendcmd (int op); ++ ++int __init spiflash_init (void); ++void __exit spiflash_exit (void); ++static int spiflash_probe (void); ++static int spiflash_erase (struct mtd_info *mtd,struct erase_info *instr); ++static int spiflash_read (struct mtd_info *mtd, loff_t from,size_t len,size_t *retlen,u_char *buf); ++static int spiflash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen,const u_char *buf); ++ ++/* Flash configuration table */ ++struct flashconfig { ++ __u32 byte_cnt; ++ __u32 sector_cnt; ++ __u32 sector_size; ++ __u32 cs_addrmask; ++} flashconfig_tbl[MAX_FLASH] = ++ { ++ { 0, 0, 0, 0}, ++ { STM_1MB_BYTE_COUNT, STM_1MB_SECTOR_COUNT, STM_1MB_SECTOR_SIZE, 0x0}, ++ { STM_2MB_BYTE_COUNT, STM_2MB_SECTOR_COUNT, STM_2MB_SECTOR_SIZE, 0x0}, ++ { STM_4MB_BYTE_COUNT, STM_4MB_SECTOR_COUNT, STM_4MB_SECTOR_SIZE, 0x0} ++ }; ++ ++/* Mapping of generic opcodes to STM serial flash opcodes */ ++struct opcodes { ++ __u16 code; ++ __s8 tx_cnt; ++ __s8 rx_cnt; ++} stm_opcodes[] = { ++ {STM_OP_WR_ENABLE, 1, 0}, ++ {STM_OP_WR_DISABLE, 1, 0}, ++ {STM_OP_RD_STATUS, 1, 1}, ++ {STM_OP_WR_STATUS, 1, 0}, ++ {STM_OP_RD_DATA, 4, 4}, ++ {STM_OP_FAST_RD_DATA, 1, 0}, ++ {STM_OP_PAGE_PGRM, 8, 0}, ++ {STM_OP_SECTOR_ERASE, 4, 0}, ++ {STM_OP_BULK_ERASE, 1, 0}, ++ {STM_OP_DEEP_PWRDOWN, 1, 0}, ++ {STM_OP_RD_SIG, 4, 1} ++}; ++ ++/* Driver private data structure */ ++struct spiflash_data { ++ struct mtd_info *mtd; ++ struct mtd_partition *parsed_parts; /* parsed partitions */ ++ void *spiflash_readaddr; /* memory mapped data for read */ ++ void *spiflash_mmraddr; /* memory mapped register space */ ++}; ++ ++static struct spiflash_data *spidata; ++ ++extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts); ++ ++/***************************************************************************************************/ ++ ++static __u32 ++spiflash_regread32(int reg) ++{ ++ volatile __u32 *data = (__u32 *)(spidata->spiflash_mmraddr + reg); ++ ++ return (*data); ++} ++ ++static void ++spiflash_regwrite32(int reg, __u32 data) ++{ ++ volatile __u32 *addr = (__u32 *)(spidata->spiflash_mmraddr + reg); ++ ++ *addr = data; ++ return; ++} ++ ++static __u32 ++spiflash_sendcmd (int op) ++{ ++ __u32 reg; ++ __u32 mask; ++ struct opcodes *ptr_opcode; ++ ++ ptr_opcode = &stm_opcodes[op]; ++ ++ do { ++ reg = spiflash_regread32(SPI_FLASH_CTL); ++ } while (reg & SPI_CTL_BUSY); ++ ++ spiflash_regwrite32(SPI_FLASH_OPCODE, ptr_opcode->code); ++ ++ reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | ptr_opcode->tx_cnt | ++ (ptr_opcode->rx_cnt << 4) | SPI_CTL_START; ++ ++ spiflash_regwrite32(SPI_FLASH_CTL, reg); ++ ++ if (ptr_opcode->rx_cnt > 0) { ++ do { ++ reg = spiflash_regread32(SPI_FLASH_CTL); ++ } while (reg & SPI_CTL_BUSY); ++ ++ reg = (__u32) spiflash_regread32(SPI_FLASH_DATA); ++ ++ switch (ptr_opcode->rx_cnt) { ++ case 1: ++ mask = 0x000000ff; ++ break; ++ case 2: ++ mask = 0x0000ffff; ++ break; ++ case 3: ++ mask = 0x00ffffff; ++ break; ++ default: ++ mask = 0xffffffff; ++ break; ++ } ++ ++ reg &= mask; ++ } ++ else { ++ reg = 0; ++ } ++ ++ return reg; ++} ++ ++/* Probe SPI flash device ++ * Function returns 0 for failure. ++ * and flashconfig_tbl array index for success. ++ */ ++static int ++spiflash_probe (void) ++{ ++ __u32 sig; ++ int flash_size; ++ ++ /* Read the signature on the flash device */ ++ sig = spiflash_sendcmd(SPI_RD_SIG); ++ ++ switch (sig) { ++ case STM_8MBIT_SIGNATURE: ++ flash_size = FLASH_1MB; ++ break; ++ case STM_16MBIT_SIGNATURE: ++ flash_size = FLASH_2MB; ++ break; ++ case STM_32MBIT_SIGNATURE: ++ flash_size = FLASH_4MB; ++ break; ++ default: ++ printk (KERN_WARNING "%s: Read of flash device signature failed!\n", module_name); ++ return (0); ++ } ++ ++ return (flash_size); ++} ++ ++ ++static int ++spiflash_erase (struct mtd_info *mtd,struct erase_info *instr) ++{ ++ struct opcodes *ptr_opcode; ++ __u32 temp, reg; ++ int finished = FALSE; ++ ++#ifdef SPIFLASH_DEBUG ++ printk (KERN_DEBUG "%s(addr = 0x%.8x, len = %d)\n",__FUNCTION__,instr->addr,instr->len); ++#endif ++ ++ /* sanity checks */ ++ if (instr->addr + instr->len > mtd->size) return (-EINVAL); ++ ++ ptr_opcode = &stm_opcodes[SPI_SECTOR_ERASE]; ++ ++ temp = ((__u32)instr->addr << 8) | (__u32)(ptr_opcode->code); ++ spiflash_sendcmd(SPI_WRITE_ENABLE); ++ do { ++ reg = spiflash_regread32(SPI_FLASH_CTL); ++ } while (reg & SPI_CTL_BUSY); ++ ++ spiflash_regwrite32(SPI_FLASH_OPCODE, temp); ++ ++ reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | ptr_opcode->tx_cnt | SPI_CTL_START; ++ spiflash_regwrite32(SPI_FLASH_CTL, reg); ++ ++ do { ++ reg = spiflash_sendcmd(SPI_RD_STATUS); ++ if (!(reg & SPI_STATUS_WIP)) { ++ finished = TRUE; ++ } ++ } while (!finished); ++ ++ instr->state = MTD_ERASE_DONE; ++ if (instr->callback) instr->callback (instr); ++ ++#ifdef SPIFLASH_DEBUG ++ printk (KERN_DEBUG "%s return\n",__FUNCTION__); ++#endif ++ return (0); ++} ++ ++static int ++spiflash_read (struct mtd_info *mtd, loff_t from,size_t len,size_t *retlen,u_char *buf) ++{ ++ u_char *read_addr; ++ ++#ifdef SPIFLASH_DEBUG ++ printk (KERN_DEBUG "%s(from = 0x%.8x, len = %d)\n",__FUNCTION__,(__u32) from,(int)len); ++#endif ++ ++ /* sanity checks */ ++ if (!len) return (0); ++ if (from + len > mtd->size) return (-EINVAL); ++ ++ ++ /* we always read len bytes */ ++ *retlen = len; ++ ++ read_addr = (u_char *)(spidata->spiflash_readaddr + from); ++ memcpy(buf, read_addr, len); ++ ++ return (0); ++} ++ ++static int ++spiflash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen,const u_char *buf) ++{ ++ int done = FALSE, page_offset, bytes_left, finished; ++ __u32 xact_len, spi_data = 0, opcode, reg; ++ ++#ifdef SPIFLASH_DEBUG ++ printk (KERN_DEBUG "%s(to = 0x%.8x, len = %d)\n",__FUNCTION__,(__u32) to,len); ++#endif ++ ++ *retlen = 0; ++ ++ /* sanity checks */ ++ if (!len) return (0); ++ if (to + len > mtd->size) return (-EINVAL); ++ ++ opcode = stm_opcodes[SPI_PAGE_PROGRAM].code; ++ bytes_left = len; ++ ++ while (done == FALSE) { ++ xact_len = MIN(bytes_left, sizeof(__u32)); ++ ++ /* 32-bit writes cannot span across a page boundary ++ * (256 bytes). This types of writes require two page ++ * program operations to handle it correctly. The STM part ++ * will write the overflow data to the beginning of the ++ * current page as opposed to the subsequent page. ++ */ ++ page_offset = (to & (STM_PAGE_SIZE - 1)) + xact_len; ++ ++ if (page_offset > STM_PAGE_SIZE) { ++ xact_len -= (page_offset - STM_PAGE_SIZE); ++ } ++ ++ spiflash_sendcmd(SPI_WRITE_ENABLE); ++ ++ do { ++ reg = spiflash_regread32(SPI_FLASH_CTL); ++ } while (reg & SPI_CTL_BUSY); ++ ++ switch (xact_len) { ++ case 1: ++ (__u8)spi_data = *buf; ++ break; ++ case 2: ++ spi_data = (buf[1] << 8) | buf[0]; ++ break; ++ case 3: ++ spi_data = (buf[2] << 16) | (buf[1] << 8) | buf[0]; ++ break; ++ case 4: ++ spi_data = (buf[3] << 24) | (buf[2] << 16) | ++ (buf[1] << 8) | buf[0]; ++ break; ++ default: ++ printk("spiflash_write: default case\n"); ++ break; ++ } ++ ++ spiflash_regwrite32(SPI_FLASH_DATA, spi_data); ++ opcode = (opcode & SPI_OPCODE_MASK) | ((__u32)to << 8); ++ spiflash_regwrite32(SPI_FLASH_OPCODE, opcode); ++ ++ reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | (xact_len + 4) | SPI_CTL_START; ++ spiflash_regwrite32(SPI_FLASH_CTL, reg); ++ finished = FALSE; ++ ++ do { ++ udelay(1); ++ reg = spiflash_sendcmd(SPI_RD_STATUS); ++ if (!(reg & SPI_STATUS_WIP)) { ++ finished = TRUE; ++ } ++ } while (!finished); ++ ++ bytes_left -= xact_len; ++ to += xact_len; ++ buf += xact_len; ++ ++ *retlen += xact_len; ++ ++ if (bytes_left == 0) { ++ done = TRUE; ++ } ++ } ++ ++ return (0); ++} ++ ++ ++int __init ++spiflash_init (void) ++{ ++ int result, i; ++ int index, num_parts; ++ struct mtd_info *mtd; ++ struct mtd_partition *mtd_parts; ++ ++ spidata = kmalloc(sizeof(struct spiflash_data), GFP_KERNEL); ++ if (!spidata) ++ return (-ENXIO); ++ ++ spidata->spiflash_mmraddr = ioremap_nocache(SPI_FLASH_MMR, SPI_FLASH_MMR_SIZE); ++ if (!spidata->spiflash_mmraddr) { ++ printk (KERN_WARNING "%s: Failed to map flash device\n", module_name); ++ kfree(spidata); ++ return (-ENXIO); ++ } ++ ++ mtd = kmalloc(sizeof(struct mtd_info), GFP_KERNEL); ++ if (!mtd) { ++ kfree(spidata); ++ return (-ENXIO); ++ } ++ ++ memset (mtd,0,sizeof (*mtd)); ++ ++ printk ("MTD driver for SPI flash.\n"); ++ printk ("%s: Probing for Serial flash ...\n", module_name); ++ if (!(index = spiflash_probe ())) { ++ printk (KERN_WARNING "%s: Found no serial flash device\n", module_name); ++ kfree(mtd); ++ kfree(spidata); ++ return (-ENXIO); ++ } ++ printk ("%s: Found SPI serial Flash.\n", module_name); ++ printk ("%d: size\n", flashconfig_tbl[index].byte_cnt); ++ ++ spidata->spiflash_readaddr = ioremap_nocache(SPI_FLASH_READ, flashconfig_tbl[index].byte_cnt); ++ if (!spidata->spiflash_readaddr) { ++ printk (KERN_WARNING "%s: Failed to map flash device\n", module_name); ++ kfree(mtd); ++ kfree(spidata); ++ return (-ENXIO); ++ } ++ ++ mtd->name = module_name; ++ mtd->type = MTD_NORFLASH; ++ mtd->flags = (MTD_CAP_NORFLASH|MTD_WRITEABLE); ++ mtd->size = flashconfig_tbl[index].byte_cnt; ++ mtd->erasesize = flashconfig_tbl[index].sector_size; ++ mtd->numeraseregions = 0; ++ mtd->eraseregions = NULL; ++ mtd->module = THIS_MODULE; ++ mtd->erase = spiflash_erase; ++ mtd->read = spiflash_read; ++ mtd->write = spiflash_write; ++ ++#ifdef SPIFLASH_DEBUG ++ printk (KERN_DEBUG ++ "mtd->name = %s\n" ++ "mtd->size = 0x%.8x (%uM)\n" ++ "mtd->erasesize = 0x%.8x (%uK)\n" ++ "mtd->numeraseregions = %d\n", ++ mtd->name, ++ mtd->size, mtd->size / (1024*1024), ++ mtd->erasesize, mtd->erasesize / 1024, ++ mtd->numeraseregions); ++ ++ if (mtd->numeraseregions) { ++ for (result = 0; result < mtd->numeraseregions; result++) { ++ printk (KERN_DEBUG ++ "\n\n" ++ "mtd->eraseregions[%d].offset = 0x%.8x\n" ++ "mtd->eraseregions[%d].erasesize = 0x%.8x (%uK)\n" ++ "mtd->eraseregions[%d].numblocks = %d\n", ++ result,mtd->eraseregions[result].offset, ++ result,mtd->eraseregions[result].erasesize,mtd->eraseregions[result].erasesize / 1024, ++ result,mtd->eraseregions[result].numblocks); ++ } ++ } ++#endif ++ ++#ifndef CONFIG_BLK_DEV_INITRD ++ /* parse redboot partitions */ ++ num_parts = parse_redboot_partitions(mtd, &spidata->parsed_parts); ++ ++#ifdef SPIFLASH_DEBUG ++ printk (KERN_DEBUG "Found %d redboot partitions\n", num_parts); ++#endif ++ ++ if (num_parts) { ++ result = add_mtd_partitions(mtd, spidata->parsed_parts, num_parts); ++ /* Find root partition */ ++ mtd_parts = spidata->parsed_parts; ++ for (i=0; i < num_parts; i++) { ++ if (!strcmp(mtd_parts[i].name, ROOTFS_NAME)) { ++ /* Create root device */ ++ ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, i); ++ break; ++ } ++ } ++ } else { ++#ifdef SPIFLASH_DEBUG ++ printk (KERN_DEBUG "Did not find any redboot partitions\n"); ++#endif ++ kfree(mtd); ++ kfree(spidata); ++ return (-ENXIO); ++ } ++#endif ++ ++ spidata->mtd = mtd; ++ ++ return (result); ++} ++ ++void __exit ++spiflash_exit (void) ++{ ++ if (spidata && spidata->parsed_parts) { ++ del_mtd_partitions (spidata->mtd); ++ kfree(spidata->mtd); ++ kfree(spidata); ++ } ++} ++ ++module_init (spiflash_init); ++module_exit (spiflash_exit); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Atheros Communications Inc"); ++MODULE_DESCRIPTION("MTD driver for SPI Flash on Atheros SOC"); ++ +diff -urN linux-mips/drivers/mtd/devices/spiflash.h mips-linux-2.4.25/drivers/mtd/devices/spiflash.h +--- linux-mips/drivers/mtd/devices/spiflash.h 1970-01-01 01:00:00.000000000 +0100 ++++ mips-linux-2.4.25/drivers/mtd/devices/spiflash.h 2005-12-30 17:27:21.652123784 +0000 +@@ -0,0 +1,113 @@ ++/* ++ * SPI Flash Memory support header file. ++ * ++ * $Id: //depot/sw/releases/linuxsrc/src/kernels/mips-linux-2.4.25/drivers/mtd/devices/spiflash.h#3 $ ++ * ++ * ++ * Copyright (c) 2005, Atheros Communications Inc. ++ * ++ * This code is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++#define FLASH_1MB 1 ++#define FLASH_2MB 2 ++#define FLASH_4MB 3 ++#define MAX_FLASH 4 ++ ++#define STM_PAGE_SIZE 256 ++ ++#define STM_8MBIT_SIGNATURE 0x13 ++#define STM_M25P80_BYTE_COUNT 1048576 ++#define STM_M25P80_SECTOR_COUNT 16 ++#define STM_M25P80_SECTOR_SIZE 0x10000 ++ ++#define STM_16MBIT_SIGNATURE 0x14 ++#define STM_M25P16_BYTE_COUNT 2097152 ++#define STM_M25P16_SECTOR_COUNT 32 ++#define STM_M25P16_SECTOR_SIZE 0x10000 ++ ++#define STM_32MBIT_SIGNATURE 0x15 ++#define STM_M25P32_BYTE_COUNT 4194304 ++#define STM_M25P32_SECTOR_COUNT 64 ++#define STM_M25P32_SECTOR_SIZE 0x10000 ++ ++#define STM_1MB_BYTE_COUNT STM_M25P80_BYTE_COUNT ++#define STM_1MB_SECTOR_COUNT STM_M25P80_SECTOR_COUNT ++#define STM_1MB_SECTOR_SIZE STM_M25P80_SECTOR_SIZE ++#define STM_2MB_BYTE_COUNT STM_M25P16_BYTE_COUNT ++#define STM_2MB_SECTOR_COUNT STM_M25P16_SECTOR_COUNT ++#define STM_2MB_SECTOR_SIZE STM_M25P16_SECTOR_SIZE ++#define STM_4MB_BYTE_COUNT STM_M25P32_BYTE_COUNT ++#define STM_4MB_SECTOR_COUNT STM_M25P32_SECTOR_COUNT ++#define STM_4MB_SECTOR_SIZE STM_M25P32_SECTOR_SIZE ++ ++#define SPI_WRITE_ENABLE 0 ++#define SPI_WRITE_DISABLE 1 ++#define SPI_RD_STATUS 2 ++#define SPI_WR_STATUS 3 ++#define SPI_RD_DATA 4 ++#define SPI_FAST_RD_DATA 5 ++#define SPI_PAGE_PROGRAM 6 ++#define SPI_SECTOR_ERASE 7 ++#define SPI_BULK_ERASE 8 ++#define SPI_DEEP_PWRDOWN 9 ++#define SPI_RD_SIG 10 ++#define SPI_MAX_OPCODES 11 ++ ++#define SFI_WRITE_BUFFER_SIZE 4 ++#define SFI_FLASH_ADDR_MASK 0x00ffffff ++ ++/* ++ * ST Microelectronics Opcodes for Serial Flash ++ */ ++ ++#define STM_OP_WR_ENABLE 0x06 /* Write Enable */ ++#define STM_OP_WR_DISABLE 0x04 /* Write Disable */ ++#define STM_OP_RD_STATUS 0x05 /* Read Status */ ++#define STM_OP_WR_STATUS 0x01 /* Write Status */ ++#define STM_OP_RD_DATA 0x03 /* Read Data */ ++#define STM_OP_FAST_RD_DATA 0x0b /* Fast Read Data */ ++#define STM_OP_PAGE_PGRM 0x02 /* Page Program */ ++#define STM_OP_SECTOR_ERASE 0xd8 /* Sector Erase */ ++#define STM_OP_BULK_ERASE 0xc7 /* Bulk Erase */ ++#define STM_OP_DEEP_PWRDOWN 0xb9 /* Deep Power-Down Mode */ ++#define STM_OP_RD_SIG 0xab /* Read Electronic Signature */ ++ ++#define STM_STATUS_WIP 0x01 /* Write-In-Progress */ ++#define STM_STATUS_WEL 0x02 /* Write Enable Latch */ ++#define STM_STATUS_BP0 0x04 /* Block Protect 0 */ ++#define STM_STATUS_BP1 0x08 /* Block Protect 1 */ ++#define STM_STATUS_BP2 0x10 /* Block Protect 2 */ ++#define STM_STATUS_SRWD 0x80 /* Status Register Write Disable */ ++ ++/* ++ * SPI Flash Interface Registers ++ */ ++#define AR531XPLUS_SPI_READ 0x1fc00000 ++#define AR531XPLUS_SPI_MMR 0x11300000 ++#define AR531XPLUS_SPI_MMR_SIZE 12 ++ ++#define AR531XPLUS_SPI_CTL 0x00 ++#define AR531XPLUS_SPI_OPCODE 0x04 ++#define AR531XPLUS_SPI_DATA 0x08 ++ ++#define SPI_FLASH_READ AR531XPLUS_SPI_READ ++#define SPI_FLASH_MMR AR531XPLUS_SPI_MMR ++#define SPI_FLASH_MMR_SIZE AR531XPLUS_SPI_MMR_SIZE ++#define SPI_FLASH_CTL AR531XPLUS_SPI_CTL ++#define SPI_FLASH_OPCODE AR531XPLUS_SPI_OPCODE ++#define SPI_FLASH_DATA AR531XPLUS_SPI_DATA ++ ++#define SPI_CTL_START 0x00000100 ++#define SPI_CTL_BUSY 0x00010000 ++#define SPI_CTL_TXCNT_MASK 0x0000000f ++#define SPI_CTL_RXCNT_MASK 0x000000f0 ++#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff ++#define SPI_CTL_SIZE_MASK 0x00060000 ++ ++#define SPI_CTL_CLK_SEL_MASK 0x03000000 ++#define SPI_OPCODE_MASK 0x000000ff ++ ++#define SPI_STATUS_WIP STM_STATUS_WIP +diff -urN linux-mips/drivers/mtd/maps/Config.in mips-linux-2.4.25/drivers/mtd/maps/Config.in +--- linux-mips/drivers/mtd/maps/Config.in 2005-12-24 15:11:25.158488072 +0000 ++++ mips-linux-2.4.25/drivers/mtd/maps/Config.in 2005-12-30 17:27:21.660122568 +0000 +@@ -9,7 +9,14 @@ + dep_tristate ' CFI Flash device in physical memory map' CONFIG_MTD_PHYSMAP $CONFIG_MTD_GEN_PROBE + if [ "$CONFIG_MTD_PHYSMAP" = "y" -o "$CONFIG_MTD_PHYSMAP" = "m" ]; then + hex ' Physical start address of flash mapping' CONFIG_MTD_PHYSMAP_START 0x8000000 +- hex ' Physical length of flash mapping' CONFIG_MTD_PHYSMAP_LEN 0x4000000 ++ if [ "$CONFIG_FLASH_2MB" = "y" ]; then ++ define_hex CONFIG_MTD_PHYSMAP_LEN 200000 ++ fi ++ if [ "$CONFIG_FLASH_4MB" = "y" ]; then ++ define_hex CONFIG_MTD_PHYSMAP_LEN 400000 ++ fi ++ ++# hex ' Physical length of flash mapping' CONFIG_MTD_PHYSMAP_LEN 0x4000000 + int ' Bus width in octets' CONFIG_MTD_PHYSMAP_BUSWIDTH 2 + fi + +diff -urN linux-mips/drivers/mtd/maps/physmap.c mips-linux-2.4.25/drivers/mtd/maps/physmap.c +--- linux-mips/drivers/mtd/maps/physmap.c 2005-12-24 15:11:25.217479104 +0000 ++++ mips-linux-2.4.25/drivers/mtd/maps/physmap.c 2005-12-30 17:27:22.044064200 +0000 +@@ -80,12 +80,25 @@ + }; + + #ifdef CONFIG_MTD_PARTITIONS +-#ifdef CONFIG_MTD_CMDLINE_PARTS ++#if defined(CONFIG_MTD_CMDLINE_PARTS) || defined(CONFIG_MTD_REDBOOT_PARTS) + static struct mtd_partition *mtd_parts = 0; + static int mtd_parts_nb = 0; + #else + static struct mtd_partition physmap_partitions[] = { + /* Put your own partition definitions here */ ++ { ++ name: "rootfs", ++#ifdef CONFIG_FLASH_2MB ++ size: 0x000e0000, ++ offset: 0x000f0000, ++#endif ++#ifdef CONFIG_FLASH_4MB ++ size: 0x002dd000, ++ offset: 0x00100000, ++#endif ++ ++ /* Allow file system to be mounted for writing */ ++ } + #if 0 + { + name: "bootROM", +@@ -138,6 +151,22 @@ + + add_mtd_device(mymtd); + #ifdef CONFIG_MTD_PARTITIONS ++#ifdef CONFIG_MTD_REDBOOT_PARTS ++ { ++ extern int parse_redboot_partitions(struct mtd_info *master, ++ struct mtd_partition **pparts); ++ ++ struct mtd_partition *rb_parts = 0; ++ int rb_parts_nb = 0; ++ ++ rb_parts_nb = parse_redboot_partitions(mymtd, &rb_parts); ++ if (rb_parts_nb > 0) { ++ printk(KERN_NOTICE ++ "Using redboot flash partitioning"); ++ add_mtd_partitions (mymtd, rb_parts, rb_parts_nb); ++ } ++ } ++#endif + #ifdef CONFIG_MTD_CMDLINE_PARTS + mtd_parts_nb = parse_cmdline_partitions(mymtd, &mtd_parts, + "phys"); +@@ -147,7 +176,8 @@ + "Using command line partition definition\n"); + add_mtd_partitions (mymtd, mtd_parts, mtd_parts_nb); + } +-#else ++#endif ++#if !defined(CONFIG_MTD_CMDLINE_PARTS) && !defined(CONFIG_MTD_REDBOOT_PARTS) + if (NUM_PARTITIONS != 0) + { + printk(KERN_NOTICE +diff -urN linux-mips/drivers/mtd/redboot.c mips-linux-2.4.25/drivers/mtd/redboot.c +--- linux-mips/drivers/mtd/redboot.c 2005-12-24 15:11:25.249474240 +0000 ++++ mips-linux-2.4.25/drivers/mtd/redboot.c 2005-12-30 17:27:22.517992152 +0000 +@@ -51,8 +51,14 @@ + return -ENOMEM; + + /* Read the start of the last erase block */ +- ret = master->read(master, master->size - master->erasesize, ++ { ++ u_int32_t part_table_start = master->size - master->erasesize; ++#if defined(CONFIG_MTD_END_RESERVED) ++ part_table_start -= CONFIG_MTD_END_RESERVED; ++#endif ++ ret = master->read(master, part_table_start, + PAGE_SIZE, &retlen, (void *)buf); ++ } + + if (ret) + goto out; +diff -urN linux-mips/drivers/net/Config.in mips-linux-2.4.25/drivers/net/Config.in +--- linux-mips/drivers/net/Config.in 2005-12-24 15:11:25.725401888 +0000 ++++ mips-linux-2.4.25/drivers/net/Config.in 2005-12-30 17:27:22.684966768 +0000 +@@ -24,6 +24,18 @@ + comment 'Ethernet (10 or 100Mbit)' + bool 'Ethernet (10 or 100Mbit)' CONFIG_NET_ETHERNET + if [ "$CONFIG_NET_ETHERNET" = "y" ]; then ++ define_bool CONFIG_VENETDEV n ++ tristate ' BUILT-IN ATHEROS ENET DRIVER' CONFIG_NET_ATHEROS_ETHER ++ if [ "$CONFIG_AP38" = "y" -o "$CONFIG_AP48" = "y" ]; then ++ define_bool CONFIG_KENDIN_ENET_PHY y ++ elif [ "$CONFIG_AP30ASK" = "y" ]; then ++ define_bool CONFIG_KENDIN_KS8995XA_ENET_PHY y ++ bool 'Multiple Ethernet address hack ' CONFIG_ASK_MULT_MAC_HACK ++ elif [ "$CONFIG_AP51" = "y" ]; then ++ define_bool CONFIG_ICPLUS_ENET_PHY y ++ else ++ define_bool CONFIG_MARVELL_ENET_PHY y ++ fi + if [ "$CONFIG_ARM" = "y" ]; then + dep_bool ' ARM EBSA110 AM79C961A support' CONFIG_ARM_AM79C961A $CONFIG_ARCH_EBSA110 + tristate ' Cirrus Logic CS8900A support' CONFIG_ARM_CIRRUS +diff -urN linux-mips/drivers/net/Makefile mips-linux-2.4.25/drivers/net/Makefile +--- linux-mips/drivers/net/Makefile 2005-12-24 15:11:25.726401736 +0000 ++++ mips-linux-2.4.25/drivers/net/Makefile 2005-12-30 17:27:22.709962968 +0000 +@@ -31,6 +31,10 @@ + obj-y += e1000/e1000.o + endif + ++ifeq ($(CONFIG_NET_ATHEROS_ETHER),y) ++ obj-y += ath/ae531x.o ++endif ++ + ifeq ($(CONFIG_BONDING),y) + obj-y += bonding/bonding.o + endif +@@ -53,8 +57,13 @@ + subdir-$(CONFIG_SKFP) += skfp + subdir-$(CONFIG_E100) += e100 + subdir-$(CONFIG_E1000) += e1000 ++subdir-$(CONFIG_NET_ATHEROS_ETHER) += ath + subdir-$(CONFIG_BONDING) += bonding + ++ifeq ($(CONFIG_ATHAP33),y) ++subdir-$(CONFIG_ATHAP33) += athap33 ++endif ++ + # + # link order important here + # +@@ -242,6 +251,10 @@ + obj-$(CONFIG_R8169) += r8169.o + obj-$(CONFIG_AMD8111_ETH) += amd8111e.o mii.o + ++ifeq ($(CONFIG_ATHAP33),y) ++obj-$(CONFIG_ATHAP33) += athap33/ath_ap_mips.o ++endif ++ + # non-drivers/net drivers who want mii lib + obj-$(CONFIG_PCMCIA_SMC91C92) += mii.o + obj-$(CONFIG_USB_USBNET) += mii.o +diff -urN linux-mips/fs/jffs2/nodelist.h mips-linux-2.4.25/fs/jffs2/nodelist.h +--- linux-mips/fs/jffs2/nodelist.h 2005-12-24 15:11:50.407649616 +0000 ++++ mips-linux-2.4.25/fs/jffs2/nodelist.h 2005-12-30 17:27:51.289618200 +0000 +@@ -31,7 +31,7 @@ + * provisions above, a recipient may use your version of this file + * under either the RHEPL or the GPL. + * +- * $Id: nodelist.h,v 1.46.2.5 2003/11/02 13:54:20 dwmw2 Exp $ ++ * $Id: //depot/sw/releases/linuxsrc/src/kernels/mips-linux-2.4.25/fs/jffs2/nodelist.h#3 $ + * + */ + +@@ -222,8 +222,8 @@ + #define ALLOC_DELETION 1 /* Deletion node. Best to allow it */ + #define ALLOC_GC 2 /* Space requested for GC. Give it or die */ + +-#define JFFS2_RESERVED_BLOCKS_BASE 3 /* Number of free blocks there must be before we... */ +-#define JFFS2_RESERVED_BLOCKS_WRITE (JFFS2_RESERVED_BLOCKS_BASE + 2) /* ... allow a normal filesystem write */ ++#define JFFS2_RESERVED_BLOCKS_BASE 2 /* Number of free blocks there must be before we... */ ++#define JFFS2_RESERVED_BLOCKS_WRITE (JFFS2_RESERVED_BLOCKS_BASE + 1) /* ... allow a normal filesystem write */ + #define JFFS2_RESERVED_BLOCKS_DELETION (JFFS2_RESERVED_BLOCKS_BASE + 1) /* ... allow a normal filesystem deletion */ + #define JFFS2_RESERVED_BLOCKS_GCTRIGGER (JFFS2_RESERVED_BLOCKS_BASE + 3) /* ... wake up the GC thread */ + #define JFFS2_RESERVED_BLOCKS_GCBAD (JFFS2_RESERVED_BLOCKS_BASE + 1) /* ... pick a block from the bad_list to GC */ +diff -urN linux-mips/fs/partitions/Config.in mips-linux-2.4.25/fs/partitions/Config.in +--- linux-mips/fs/partitions/Config.in 2005-12-24 15:11:52.366351848 +0000 ++++ mips-linux-2.4.25/fs/partitions/Config.in 2005-12-30 17:27:52.279467720 +0000 +@@ -39,7 +39,7 @@ + fi + if [ "$CONFIG_AMIGA" != "y" -a "$CONFIG_ATARI" != "y" -a \ + "$CONFIG_MAC" != "y" -a "$CONFIG_SGI_IP22" != "y" -a \ +- "$CONFIG_SGI_IP27" != "y" ]; then ++ "$CONFIG_SGI_IP27" != "y" -a "$CONFIG_AR531X" != "y" ]; then + define_bool CONFIG_MSDOS_PARTITION y + fi + if [ "$CONFIG_AMIGA" = "y" -o "$CONFIG_AFFS_FS" = "y" ]; then +diff -urN linux-mips/include/asm-mips/atheros/ar531xbsp.h mips-linux-2.4.25/include/asm-mips/atheros/ar531xbsp.h +--- linux-mips/include/asm-mips/atheros/ar531xbsp.h 1970-01-01 01:00:00.000000000 +0100 ++++ mips-linux-2.4.25/include/asm-mips/atheros/ar531xbsp.h 2005-12-30 17:28:01.523062480 +0000 +@@ -0,0 +1,17 @@ ++#ifndef __ASM_ATHEROS_BSP_SUPPORT_H ++#define __ASM_ATHEROS_BSP_SUPPORT_H ++/* ++ * These are definitions and functions provided by the bsp to support the ++ * AR5312 WiSoC running LSDK. For different BSP implementations, different ++ * BSP functions will be needed. ++ */ ++ ++extern unsigned int ar531x_sys_frequency(void); ++extern const char* get_system_type(void); ++ ++#ifdef CONFIG_KGDB ++extern void kgdbInit(void); ++extern int kgdbEnabled(void); ++#endif ++ ++#endif /* __ASM_ATHEROS_BSP_SUPPORT_H */ +diff -urN linux-mips/include/asm-mips/bootinfo.h mips-linux-2.4.25/include/asm-mips/bootinfo.h +--- linux-mips/include/asm-mips/bootinfo.h 2005-12-24 15:12:00.645093288 +0000 ++++ mips-linux-2.4.25/include/asm-mips/bootinfo.h 2005-12-30 17:28:01.534060808 +0000 +@@ -37,6 +37,7 @@ + #define MACH_GROUP_HP_LJ 20 /* Hewlett Packard LaserJet */ + #define MACH_GROUP_LASAT 21 + #define MACH_GROUP_TITAN 22 /* PMC-Sierra Titan */ ++#define MACH_GROUP_AR531X 23 /* Atheros AR531X */ + + /* + * Valid machtype values for group unknown (low order halfword of mips_machtype) +@@ -198,6 +199,17 @@ + */ + #define MACH_TITAN_YOSEMITE 1 /* PMC-Sierra Yosemite */ + ++/* ++ * Valid machtype for group MACH_GROUP_AR5312 ++ */ ++#define MACH_ATHEROS_UNUSED 0 ++#define MACH_ATHEROS_AP30 1 /* AP30 */ ++#define MACH_ATHEROS_AP33 2 /* AP33 */ ++#define MACH_ATHEROS_AP38 3 /* AP38 */ ++#define MACH_ATHEROS_AP43 4 /* AP43 */ ++#define MACH_ATHEROS_AP48 5 /* AP48 */ ++#define MACH_ATHEROS_PB32 6 /* PB32 */ ++ + #define CL_SIZE (256) + + const char *get_system_type(void); +diff -urN linux-mips/include/asm-mips/page.h mips-linux-2.4.25/include/asm-mips/page.h +--- linux-mips/include/asm-mips/page.h 2005-12-24 15:12:01.097024584 +0000 ++++ mips-linux-2.4.25/include/asm-mips/page.h 2005-12-30 17:28:01.898005480 +0000 +@@ -13,7 +13,6 @@ + #include + #include + +-#ifdef __KERNEL__ + + /* + * PAGE_SHIFT determines the page size +@@ -30,6 +29,7 @@ + #define PAGE_SIZE (1L << PAGE_SHIFT) + #define PAGE_MASK (~(PAGE_SIZE-1)) + ++#ifdef __KERNEL__ + #ifndef __ASSEMBLY__ + + #include +diff -urN linux-mips/include/asm-mips/serial.h mips-linux-2.4.25/include/asm-mips/serial.h +--- linux-mips/include/asm-mips/serial.h 2005-12-24 15:12:01.130019568 +0000 ++++ mips-linux-2.4.25/include/asm-mips/serial.h 2005-12-30 17:28:02.143968088 +0000 +@@ -410,6 +410,11 @@ + #define DDB5477_SERIAL_PORT_DEFNS + #endif + ++#if defined(CONFIG_AR531X) ++#undef RS_TABLE_SIZE ++#define RS_TABLE_SIZE 1 ++#endif ++ + #define SERIAL_PORT_DFNS \ + ATLAS_SERIAL_PORT_DEFNS \ + AU1000_SERIAL_PORT_DEFNS \ +diff -urN linux-mips/kernel/printk.c mips-linux-2.4.25/kernel/printk.c +--- linux-mips/kernel/printk.c 2005-12-24 15:12:09.361768152 +0000 ++++ mips-linux-2.4.25/kernel/printk.c 2005-12-30 17:28:11.943478336 +0000 +@@ -383,6 +383,18 @@ + _call_console_drivers(start_print, end, msg_level); + } + ++#if CONFIG_EARLY_PRINTK_HACK ++void putDebugChar(char byte); ++static void emit_log_char(char c) ++{ ++ if (c == '\n') { ++ putDebugChar('\r'); ++ putDebugChar('\n'); ++ } else { ++ putDebugChar(c); ++ } ++} ++#else + static void emit_log_char(char c) + { + LOG_BUF(log_end) = c; +@@ -394,6 +406,7 @@ + if (logged_chars < LOG_BUF_LEN) + logged_chars++; + } ++#endif + + /* + * This is printk. It can be called from any context. We want it to work. +@@ -696,3 +709,4 @@ + tty->driver.write(tty, 0, msg, strlen(msg)); + return; + } ++ +diff -urN linux-mips-orig/drivers/net/ath/ae531x.h linux-mips-new/drivers/net/ath/ae531x.h +--- linux-mips-orig/drivers/net/ath/ae531x.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-mips-new/drivers/net/ath/ae531x.h 2005-12-31 12:33:57.672538976 +0000 +@@ -0,0 +1,43 @@ ++#ifndef __AE531X_H ++#define __AE531X_H ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "ar531xlnx.h" ++#include "ae531xreg.h" ++#include "ae531xmac.h" ++ ++extern void *ae531x_rxbuf_alloc(ae531x_MAC_t *MACInfo, char **rxBuffp, ++ int *rxBuffSizep); ++extern void ae531x_swptr_free(VIRT_ADDR desc); ++extern BOOL ae531x_twisted_enet(void); ++extern void ae531x_MiiWrite(UINT32 phyBase, UINT32 phyAddr, UINT8 reg, ++ UINT16 data); ++extern UINT16 ae531x_MiiRead(UINT32 phyBase, UINT32 phyAddr, UINT8 reg); ++extern void ae531x_unitLinkGained(int ethUnit); ++extern void ae531x_unitLinkLost(int ethUnit); ++extern void ae531x_WriteDmaReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 data); ++extern void ae531x_MACReset(ae531x_MAC_t *MACInfo); ++extern void ae531x_DisableComm(ae531x_MAC_t *MACInfo); ++extern void ae531x_FreeQueues(ae531x_MAC_t *MACInfo); ++extern void ae531x_reset(ae531x_MAC_t *MACInfo); ++extern int ae531x_AllocateQueues(ae531x_MAC_t *MACInfo); ++extern void ae531x_EnableComm(ae531x_MAC_t *MACInfo); ++extern void ae531x_DmaIntEnable(ae531x_MAC_t *MACInfo); ++extern void ae531x_DmaIntDisable(ae531x_MAC_t *MACInfo); ++extern void ae531x_DmaReset(ae531x_MAC_t *MACInfo); ++extern void ae531x_BeginResetMode(ae531x_MAC_t *MACInfo); ++extern void ae531x_AckIntr(ae531x_MAC_t *MACInfo, UINT32 data); ++extern void ae531x_SetDmaReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 val); ++extern BOOL ae531x_IsInResetMode(ae531x_MAC_t *MACInfo); ++extern UINT32 ae531x_ReadDmaReg(ae531x_MAC_t *MACInfo, UINT32 reg); ++extern void ae531x_ClearDmaReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 val); ++ ++#endif /* __AE531X_H */ +diff -urN linux-mips-orig/drivers/net/ath/ae531xlnx.c linux-mips-new/drivers/net/ath/ae531xlnx.c +--- linux-mips-orig/drivers/net/ath/ae531xlnx.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-mips-new/drivers/net/ath/ae531xlnx.c 2005-12-31 12:33:57.673538824 +0000 +@@ -0,0 +1,1303 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved. ++ */ ++ ++/* ++ * Ethernet driver for Atheros' ae531x ethernet MAC. ++ * This is a fairly generic driver, but it's intended ++ * for use in typical Atheros products. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "ar531xlnx.h" ++#include "ae531xreg.h" ++#include "ae531xmac.h" ++#include "ae531x.h" ++ ++#ifndef EXPORT_SYMTAB ++#define EXPORT_SYMTAB ++#endif ++ ++#ifdef DEBUG ++void my_mvPhyShow(int ethUnit); ++#endif ++ ++static struct ar531x_boarddata *ar531x_boardConfig=NULL; ++ ++static char *radioConfig=NULL; ++ ++#define AE531X_LAN_PORT 0 ++#define AE531X_DEV_PER_MAC 1 ++ ++/* ++ * ae531x_MAC_state contains driver-specific linux-specific per-MAC information. ++ * The OSinfo member of ae531x_MAC_t points to one of these. ++ */ ++typedef struct ae531x_MAC_state { ++ int irq; ++ struct tq_struct restart_task; ++ struct net_device_stats stats; ++ struct ae531x_dev_sw_state *dev_sw_state[AE531X_DEV_PER_MAC]; ++ int primary_dev; ++ ae531x_MAC_t MACInfo; /* hardware state */ ++} ae531x_MAC_state_t; ++ ++/* ++ * ae531x_dev_sw_state contains driver-specific linux-specific per-device ++ * information. The net_device priv member points to one of these, and ++ * this structure contains a pointer to the associated MAC information. ++ */ ++ ++typedef struct ae531x_dev_sw_state { ++ int enetUnit; /* system unit number "eth%d" */ ++ int unit_on_MAC; /* MAC-relative unit number */ ++ struct net_device *dev; ++ ae531x_MAC_state_t *MAC_state; /* underlying MAC hw/sw state */ ++} ae531x_dev_sw_state_t; ++ ++/* ++ * Driver-independent linux-specific per-ethernet device software information. ++ */ ++static struct net_device *ae531x_MAC_dev[AR531X_NUM_ENET_MAC * AE531X_DEV_PER_MAC]; ++ ++/* Driver-dependent per-MAC information */ ++static ae531x_MAC_state_t per_MAC_info[AR531X_NUM_ENET_MAC]; ++ ++/* ++ * Receive buffers need enough room to hold the following: ++ * 1) a max MTU-sized packet. ++ * 2) space for an ethernet header ++ * 3) room at the beginning of the receive buffer in order ++ * to facilitate cooperating drivers that need to PREpend ++ * data. ++ * 4) Depending on configuration, we may need some additional ++ * room at the END of the rx buffer for phy-supplied ++ * trailers (if any). (c.f. CONFIG_VENETDEV) ++ * ++ * The DMA engine insists on 32-bit aligned RX buffers. ++ * TBDXXX: With current code, the IP stack ends up looking ++ * at misaligned headers with word operations. The misaligned ++ * reads are software-emulated via handle_adel_int. We'd ++ * rather align the buffers on a 16-bit boundary, but the ++ * DMA engine doesn't permit it??? ++ */ ++#define ETH_MAX_MTU 1518 ++#define AE531X_RX_BUF_SIZE \ ++ (((RXBUFF_RESERVE + ETH_HLEN + ETH_MAX_MTU + PHY_TRAILER_SIZE) + 3) & ~3) ++ ++/* Forward references to local functions */ ++static void ae531x_TxReap(ae531x_MAC_state_t *MAC_state); ++static int ae531x_phy_poll(void *data); ++static int ae531x_MAC_stop(struct net_device *dev); ++static int ae531x_MAC_open(struct net_device *dev); ++ ++/******************************************************************************* ++* ae531x_MAC_poll checks for received packets, and sends data ++* up the stack. ++*/ ++int ++ae531x_MAC_poll(struct net_device *dev, int *budget) ++{ ++ struct sk_buff *skb; ++ struct sk_buff *newskb; ++ char *rxBufp; ++ int unused_length; ++ VIRT_ADDR rxDesc; ++ int length; ++ ae531x_dev_sw_state_t *dev_sw_state; ++ ae531x_MAC_state_t *MAC_state; ++ ae531x_MAC_t *MACInfo; ++ u32 cmdsts; ++ int rx_limit; ++ int rx_received; ++ int rxDescCount; ++ struct net_device *rxdev; ++ int early_stop; ++ int retval; ++#ifdef DEBUG ++ static int rxDescCountMax = 0; ++#endif ++ ++ ARRIVE(); ++ ++ dev_sw_state = (ae531x_dev_sw_state_t *)dev->priv; ++ MAC_state = dev_sw_state->MAC_state; ++ MACInfo = &MAC_state->MACInfo; ++ rx_limit = MAC_state->dev_sw_state[MAC_state->primary_dev]->dev->quota; ++ rx_received = 0; ++ ++ rxDescCount = 0; ++ ++ early_stop = 0; ++ do { ++ ae531x_AckIntr(MACInfo, DmaIntRxCompleted); ++ ++ for(;!early_stop;) { ++ rxDesc = MACInfo->rxQueue.curDescAddr; ++ cmdsts = AE531X_DESC_STATUS_GET(KSEG1ADDR(rxDesc)); ++ ++ AE531X_PRINT(AE531X_DEBUG_RX, ++ ("examine rxDesc %p with cmdsts=0x%x\n", ++ (void *)rxDesc, cmdsts)); ++ ++ if (cmdsts & DescOwnByDma) { ++ /* There's nothing left to process in the RX ring */ ++ goto rx_all_done; ++ } ++ ++ rxDescCount++; ++ ++ AE531X_CONSUME_DESC((&MACInfo->rxQueue)); ++ ++ A_DATA_CACHE_INVAL(rxDesc, AE531X_DESC_SIZE); ++ ++ /* Process a packet */ ++ length = AE531X_DESC_STATUS_RX_SIZE(cmdsts) - ETH_CRC_LEN; ++ if ( (cmdsts & (DescRxFirst |DescRxLast | DescRxErrors)) == ++ (DescRxFirst | DescRxLast) ) { ++ /* Descriptor status indicates "NO errors" */ ++ skb = AE531X_DESC_SWPTR_GET(rxDesc); ++ ++ /* ++ * Allocate a replacement skb. ++ * We want to get another buffer ready for Rx ASAP. ++ */ ++ newskb = (struct sk_buff *)ae531x_rxbuf_alloc(MACInfo, &rxBufp, &unused_length); ++ if(newskb == NULL ) { ++ /* ++ * Give this descriptor back to the DMA engine, ++ * and drop the received packet. ++ */ ++ MAC_state->stats.rx_dropped++; ++ AE531X_PRINT(AE531X_DEBUG_ERROR, ++ ("Can't allocate new skb\n")); ++ } else { ++ AE531X_DESC_BUFPTR_SET(rxDesc, virt_to_bus(rxBufp)); ++ AE531X_DESC_SWPTR_SET(rxDesc, newskb); ++ } ++ ++ AE531X_DESC_STATUS_SET(rxDesc, DescOwnByDma); ++ rxDesc = NULL; /* sanity -- cannot use rxDesc now */ ++ sysWbFlush(); ++ ++ if (newskb == NULL) { ++ retval = 1; ++ goto rx_no_skbs; ++ } else { ++ /* Sync data cache w.r.t. DMA */ ++ A_DATA_CACHE_INVAL(skb->data, length); ++ ++ rxdev = dev_sw_state->dev; ++ ++ if (rxdev == NULL) { ++ /* ++ * We received a packet for a virtual enet device ++ * that is no longer up. Ignore it. ++ */ ++ kfree_skb(skb); ++ continue; ++ } ++ ++ /* Advance data pointer to show that there's data here */ ++ skb_put(skb, length); ++ skb->protocol = eth_type_trans(skb, rxdev); ++ skb->dev = rxdev; ++ rxdev->last_rx = jiffies; ++ rxdev->quota--; ++ ++ if (rx_limit-- < 0) { ++ early_stop=1; ++ /* We've done enough for now -- more later */ ++ AE531X_PRINT(AE531X_DEBUG_RX_STOP, ++ ("Enet%d RX early stop. Quota=%d rxDescCount=%d budget=%d\n", ++ MACInfo->unit, dev->quota, rxDescCount, *budget)); ++ } ++ rx_received++; ++ ++ /* Send the data up the stack */ ++ AE531X_PRINT(AE531X_DEBUG_RX, ++ ("Send data up stack: skb=%p data=%p length=%d\n", ++ (void *)skb, (void *)skb->data, length)); ++ ++ netif_receive_skb(skb); ++ ++ MAC_state->stats.rx_packets++; ++ MAC_state->stats.rx_bytes += length; ++ } ++ } else { ++ /* Descriptor status indicates ERRORS */ ++ MAC_state->stats.rx_errors++; ++ ++ if (cmdsts & (DescRxRunt | DescRxLateColl)) { ++ MAC_state->stats.collisions++; ++ } ++ ++ if (cmdsts & DescRxLengthError) { ++ MAC_state->stats.rx_length_errors++; ++ } ++ ++ if (cmdsts & DescRxCrc) { ++ MAC_state->stats.rx_crc_errors++; ++ } ++ ++ if (cmdsts & DescRxDribbling) { ++ MAC_state->stats.rx_frame_errors++; ++ } ++ ++ AE531X_DESC_STATUS_SET(rxDesc, DescOwnByDma); ++ ++ AE531X_PRINT(AE531X_DEBUG_ERROR, ++ ("Bad receive. rxDesc=%p cmdsts=0x%8.8x\n", ++ (void *)rxDesc, cmdsts)); ++ } ++ } ++ } while ((!early_stop) && ++ ae531x_ReadDmaReg(MACInfo, DmaStatus) & DmaIntRxCompleted); ++ ++rx_all_done: ++ AE531X_PRINT(AE531X_DEBUG_RX, ++ ("rx done (%d)\n", rxDescCount)); ++ *budget -= rxDescCount; ++ ++ if (!early_stop) { ++ netif_rx_complete(dev); ++ ++ ae531x_SetDmaReg(MACInfo, DmaIntrEnb, ++ DmaIeRxCompleted | DmaIeRxNoBuffer); ++ ae531x_WriteDmaReg(MACInfo, DmaRxPollDemand, 0); ++ } ++ ++ retval = early_stop; ++ ++rx_no_skbs: ++ ++ LEAVE(); ++ ++#ifdef DEBUG ++ if (rxDescCount > rxDescCountMax) { ++ printk("max rx %d\n", rxDescCount); ++ rxDescCountMax = rxDescCount; ++ } ++#endif ++ ++ return retval; ++} ++ ++/******************************************************************************* ++* ae531x_restart stops all ethernet devices associated with a physical MAC, ++* then shuts down the MAC. Then it re-opens all devices that were in use. ++* TBDXXX: needs testing! ++*/ ++static void ++ae531x_restart(void *data) ++{ ++ ae531x_MAC_t *MACInfo = (ae531x_MAC_t *)data; ++ ae531x_MAC_state_t *MAC_state = (ae531x_MAC_state_t *)MACInfo->OSinfo; ++ struct net_device *saved_dev[AE531X_DEV_PER_MAC]; ++ int i; ++ ++ for (i=0; idev_sw_state[i]->dev) != NULL) { ++ ae531x_MAC_stop(saved_dev[i]); ++ } ++ } ++ ++ for (i=0; iOSinfo; ++ for(;;) { ++ /* Clear any unhandled intr causes. */ ++ ae531x_WriteDmaReg(MACInfo, DmaStatus, UnhandledIntrMask); ++ ++ regIsr = ae531x_ReadDmaReg(MACInfo, DmaStatus); ++ regImr = ae531x_ReadDmaReg(MACInfo, DmaIntrEnb); ++ pendIntrs = regIsr & regImr; ++ ++ AE531X_PRINT(AE531X_DEBUG_INT, ++ ("ethmac%d: intIsr=0x%8.8x intImr=0x%8.8x pendIntrs=0x%8.8x\n", ++ MACInfo->unit, regIsr, regImr, pendIntrs )); ++ ++ if ((pendIntrs & DmaAllIntCauseMask) == 0) ++ break; ++ ++ if ((pendIntrs & DmaIntRxCompleted) || ++ (pendIntrs & DmaIntRxNoBuffer)) { ++ if (netif_rx_schedule_prep(MAC_state->dev_sw_state[MAC_state->primary_dev]->dev)) { ++ ae531x_ClearDmaReg(MACInfo, ++ DmaIntrEnb, ++ DmaIeRxCompleted | DmaIeRxNoBuffer); ++ ae531x_AckIntr(MACInfo, ++ DmaIntRxCompleted | DmaIntRxNoBuffer); ++ (void)ae531x_ReadDmaReg(MACInfo, DmaIntrEnb); ++ __netif_rx_schedule(MAC_state->dev_sw_state[MAC_state->primary_dev]->dev); ++ } else { ++#if 0 ++ AE531X_PRINT(AE531X_DEBUG_ERROR, ++ ("%s: Interrupt (0x%8.8x/0x%8.8x) while in poll. regs@%p, pc=%p, ra=%p\n", ++ __FILE__, ++ regIsr, ++ ae531x_ReadDmaReg(MACInfo, DmaIntrEnb), ++ (void *)regs, ++ (void *)regs->cp0_epc, ++ (void *)regs->regs[31])); ++#endif ++ ae531x_AckIntr(MACInfo, ++ DmaIntRxCompleted | DmaIntRxNoBuffer); ++ } ++ } ++ ++ if (pendIntrs & ++ (DmaIntTxStopped | DmaIntTxJabber | DmaIntTxUnderflow)) { ++ AE531X_PRINT(AE531X_DEBUG_ERROR, ++ ("ethmac%d: TX Error Intr (0x%x)\n", ++ MACInfo->unit, pendIntrs)); ++ ae531x_AckIntr(MACInfo, ++ (DmaIntTxStopped | DmaIntTxJabber | DmaIntTxUnderflow)); ++ } ++ ++ if (pendIntrs & DmaIntBusError) { ++ AE531X_PRINT(AE531X_DEBUG_ERROR, ++ ("ethmac%d: DMA Bus Error Intr (0x%x)\n", ++ MACInfo->unit, pendIntrs)); ++ ae531x_AckIntr(MACInfo, DmaIntBusError); ++ /* Reset the chip, if it's not already being done */ ++ if (ae531x_IsInResetMode(MACInfo)) { ++ goto intr_done; ++ } ++ ae531x_BeginResetMode(MACInfo); ++ schedule_task(&MAC_state->restart_task); ++ } ++ ++ if (pendIntrs & DmaIntRxStopped) { ++ AE531X_PRINT(AE531X_DEBUG_ERROR, ++ ("ethmac%d: RX Stopped Intr (0x%x)\n", ++ MACInfo->unit, pendIntrs)); ++ ae531x_AckIntr(MACInfo, DmaIntRxStopped); ++ } ++ } ++ ++ intr_done: ++ LEAVE(); ++} ++ ++/******************************************************************************* ++* ae531x_MAC_get_stats returns statistics for a specified device ++*/ ++static struct net_device_stats* ++ae531x_MAC_get_stats(struct net_device *dev) ++{ ++ ae531x_dev_sw_state_t *dev_sw_state; ++ ae531x_MAC_state_t *MAC_state; ++ ++ ARRIVE(); ++ dev_sw_state = (ae531x_dev_sw_state_t *)dev->priv; ++ MAC_state = dev_sw_state->MAC_state; ++ ++ LEAVE(); ++ return &MAC_state->stats; ++} ++ ++#define AE531X_PHY_POLL_SECONDS 2 ++ ++#if CONFIG_AR5315 ++ ++/******************************************************************************* ++* ae531x_getMACInfo returns the MACInfo of the interface given by unit ++*/ ++ae531x_MAC_t *ae531x_getMAcInfo(int ethUnit) ++{ ++ int i,j; ++ for(i=0;ienetUnit == ethUnit) ++ return (&(per_MAC_info[i].MACInfo)); ++ } ++ } ++ } ++ return NULL; ++} ++ ++ ++#endif ++ ++/******************************************************************************* ++* ae531x_phy_poll periodically checks for changes in phy status ++* (e.g. dropped link). ++*/ ++static int ++ae531x_phy_poll(void *data) ++{ ++ ae531x_dev_sw_state_t *dev_sw_state = (ae531x_dev_sw_state_t *)data; ++ ae531x_MAC_t *MACInfo = &dev_sw_state->MAC_state->MACInfo; ++ int unit = dev_sw_state->enetUnit; ++ ++ while(dev_sw_state->dev!=NULL) { ++ if (MACInfo->port_is_up) { ++ phyCheckStatusChange(unit); ++ } ++ ++ set_current_state(TASK_UNINTERRUPTIBLE); ++ schedule_timeout(AE531X_PHY_POLL_SECONDS * HZ); ++ } ++ ++ return 0; ++} ++ ++ ++static char invalid_enet_MAC_addr[] = {0, 0, 0, 0, 0, 0}; ++ ++/* ++ * Fetch a pointer to an ethernet's MAC address ++ * in the Board Configuration data (in flash). ++ */ ++char * ++ae531x_enet_mac_address_get(int MACUnit) ++{ ++ /* XXX: Hack for poorly configured boards. ++ * Cannot setup bridging properly (brctl) when both enet ++ * interfaces share the same MAC address. ++ * ++ */ ++ ++#ifdef CONFIG_ASK_MULT_MAC_HACK ++ static u8 enet0Mac[6] = {0x00, 0x0d, 0x0b, 0x13, 0x6b, 0x16}; ++ static u8 enet1Mac[6] = {0x00, 0x0d, 0x0b, 0x13, 0x6b, 0x17}; ++#endif ++ ++ if (!ar531x_boardConfig) ++ return invalid_enet_MAC_addr; ++ if (MACUnit == 0) { ++#ifndef CONFIG_ASK_MULT_MAC_HACK ++ return ar531x_boardConfig->enet0Mac; ++#else ++ return enet0Mac; ++#endif ++ } ++ if (MACUnit == 1) { ++#ifndef CONFIG_ASK_MULT_MAC_HACK ++ return ar531x_boardConfig->enet1Mac; ++#else ++ return enet1Mac; ++#endif ++ } ++ printk("Invalid ethernet MAC unit number (%d)!\n", MACUnit); ++ return invalid_enet_MAC_addr; ++} ++ ++ ++ ++/******************************************************************************* ++* ae531x_MAC_open is the standard Linux open function. It puts ++* hardware into a known good state, allocates queues, starts ++* the phy polling task, and arranges for interrupts to be handled. ++*/ ++static int ++ae531x_MAC_open(struct net_device *dev) ++{ ++ ae531x_dev_sw_state_t *dev_sw_state; ++ ae531x_MAC_state_t *MAC_state; ++ ae531x_MAC_t *MACInfo; ++ u8 *MACAddr; ++ int rv; ++ struct tq_struct *restart_task; ++ pid_t phy_poll_pid; ++ ARRIVE(); ++ ++ dev_sw_state = (ae531x_dev_sw_state_t *)dev->priv; ++ dev_sw_state->dev = dev; ++ MAC_state = dev_sw_state->MAC_state; ++ MACInfo = &MAC_state->MACInfo; ++ ++ restart_task = &MAC_state->restart_task; ++ restart_task->routine = ae531x_restart; ++ restart_task->data = (void *)MACInfo; ++ ++ AE531X_PRINT(AE531X_DEBUG_RESET, ++ ("ae531x_MAC_open eth%d ethmac%d macBase=0x%x dmaBase=0x%x irq=0x%x\n", ++ dev_sw_state->enetUnit, ++ MACInfo->unit, ++ MACInfo->macBase, ++ MACInfo->dmaBase, ++ MAC_state->irq)); ++ ++ /* Default MAC address */ ++ MACAddr = ae531x_enet_mac_address_get(MACInfo->unit); ++ memcpy(dev->dev_addr, MACAddr, dev->addr_len ); ++ ++ if (!MACInfo->port_is_up) { ++ /* Bring MAC and PHY out of reset */ ++ ae531x_reset(MACInfo); ++ ++ /* Attach interrupt handler */ ++ rv = request_irq(MAC_state->irq, ae531x_MAC_intr, SA_INTERRUPT, ++ "ae531x_MAC_intr", (void *)MACInfo); ++ if (rv < 0) { ++ AE531X_PRINT(AE531X_DEBUG_ERROR, ++ ("request_irq(0x%x) failed (%d)\n", ++ MAC_state->irq, rv)); ++ goto open_failure; ++ } ++ ++ /* Initialize PHY */ ++ AE531X_PRINT(AE531X_DEBUG_RESET, ("\n --- phyBase: %08x\n", MACInfo->phyBase)); ++ phySetup(MACInfo->unit, MACInfo->phyBase); ++ ++ /* Start thread to poll for phy link status changes */ ++ phy_poll_pid = kernel_thread(ae531x_phy_poll, dev_sw_state, 0); ++ if (phy_poll_pid < 0) { ++ AE531X_PRINT(AE531X_DEBUG_ERROR, ++ ("ethmac%d unable to start Phy Poll thread\n", ++ MACInfo->unit)); ++ } ++ ++ /* Allocate RX/TX Queues */ ++ if (ae531x_AllocateQueues(MACInfo) < 0) { ++ AE531X_PRINT(AE531X_DEBUG_RESET, ("Queue allocation failed")); ++ free_irq(MAC_state->irq, (void *)MACInfo); ++ goto open_failure; ++ } ++ ++ /* Initialize DMA and descriptors */ ++ ae531x_DmaReset(MACInfo); ++ ++ /* Initialize MAC */ ++ ae531x_MACReset(MACInfo); ++ ++ /* Enable Receive/Transmit */ ++ ae531x_EnableComm(MACInfo); ++ ++ MAC_state->primary_dev = dev_sw_state->unit_on_MAC; ++ MACInfo->port_is_up = TRUE; ++ } ++ ++ dev->trans_start = jiffies; ++ SET_MODULE_OWNER(dev); ++ ++ LEAVE(); ++ return 0; ++ ++open_failure: ++ LEAVE(); ++ return -1; ++} ++ ++/* ++ * Shut down MAC hardware. ++ */ ++static void ++ae531x_MAC_shutdown(ae531x_MAC_state_t *MAC_state) ++{ ++ ae531x_MAC_t *MACInfo; ++ ++ MACInfo = &MAC_state->MACInfo; ++ MACInfo->port_is_up = FALSE; ++ ++ /* Disable Receive/Transmit */ ++ ae531x_DisableComm(MACInfo); ++ ++ /* Disable Interrupts */ ++ ae531x_DmaIntDisable(MACInfo); ++ sysWbFlush(); ++ free_irq(MAC_state->irq, (void *)MACInfo); ++ ++ /* Free Transmit & Receive skb's/descriptors */ ++ ae531x_TxReap(MAC_state); /* one last time */ ++ ae531x_FreeQueues(MACInfo); ++} ++ ++/******************************************************************************* ++* ae531x_MAC_stop is the standard Linux stop function. It undoes ++* everything set up by ae531x_MAC_open. ++*/ ++static int ++ae531x_MAC_stop(struct net_device *dev) ++{ ++ ae531x_dev_sw_state_t *dev_sw_state; ++ ae531x_MAC_state_t *MAC_state; ++ ae531x_MAC_t *MACInfo; ++ int i; ++ ++ ARRIVE(); ++ ++ dev_sw_state = (ae531x_dev_sw_state_t *)dev->priv; ++ MAC_state = dev_sw_state->MAC_state; ++ MACInfo = &MAC_state->MACInfo; ++ ++ for (i=0; idev_sw_state[i]->dev) && ++ (MAC_state->dev_sw_state[i]->dev != dev_sw_state->dev)) { ++ break; ++ } ++ } ++ ++ if (i < AE531X_DEV_PER_MAC) { ++ /* Physical MAC is still in use */ ++ if (MAC_state->primary_dev == dev_sw_state->unit_on_MAC) { ++ /* ++ * If the primary_dev is being stopped ++ * then we need to assign a new one. ++ */ ++ MAC_state->primary_dev = i; ++ } ++ } else { ++ /* Physical MAC is no longer in use */ ++ ae531x_MAC_shutdown(MAC_state); ++ } ++ ++ dev_sw_state->dev = NULL; ++ LEAVE(); ++ return 0; ++} ++ ++/******************************************************************************* ++* ae531x_rxbuf_alloc - Allocate an skb to be associated with an RX descriptor. ++* ++* RETURNS: A pointer to the skb. Also returns a pointer to the underlying ++* buffer and the size of that buffer. ++*/ ++void * ++ae531x_rxbuf_alloc(ae531x_MAC_t *MACInfo, char **rxBuffp, int *rxBuffSizep) ++{ ++ int buf_size; ++ struct sk_buff *skb; ++ char *rxBuff; ++ int rxBuffSize; ++ ++ buf_size = AE531X_RX_BUF_SIZE; ++ ++ skb = dev_alloc_skb(buf_size); ++ if (skb) { ++ /* skb->dev = dev; */ ++ skb_reserve(skb, RXBUFF_RESERVE); ++ ++ rxBuffSize = skb_tailroom(skb); ++ rxBuff = skb->tail; ++ ++ *rxBuffp = rxBuff; ++ *rxBuffSizep = rxBuffSize; ++ } ++ ++ return skb; ++} ++ ++/******************************************************************************* ++* ae531x_swptr_free - Free the skb, if any, associated with a descriptor. ++*/ ++void ++ae531x_swptr_free(VIRT_ADDR desc) ++{ ++ struct sk_buff *skb; ++ ++ skb = (struct sk_buff *)AE531X_DESC_SWPTR_GET(desc); ++ if (skb) { ++ AE531X_DESC_SWPTR_SET(desc, NULL); ++ kfree_skb(skb); ++ } ++} ++ ++/******************************************************************************* ++* ++* ae531x_TxReap - the driver Tx completion routine. ++* ++* This routine reaps sk_buffs which have already been transmitted. ++* ++*/ ++static void ++ae531x_TxReap(ae531x_MAC_state_t *MAC_state) ++{ ++ AE531X_QUEUE *txq; ++ VIRT_ADDR txDesc; ++ UINT32 cmdsts; ++ struct sk_buff *skb; ++ int reaped; ++ ae531x_MAC_t *MACInfo; ++ static int aeUselessReap = 0; ++#ifdef DEBUG ++ static int aeMaxReap = 0; ++#endif ++ ARRIVE(); ++ ++ MACInfo = &MAC_state->MACInfo; ++ txq = &MACInfo->txQueue; ++ reaped = 0; ++ ++ while (1) { ++ ++ txDesc = AE531X_QUEUE_ELE_NEXT_GET(txq, txq->reapDescAddr); ++ if (txDesc == txq->curDescAddr) { ++ break; ++ } ++ ++ cmdsts = AE531X_DESC_STATUS_GET(KSEG1ADDR(txDesc)); ++ if (cmdsts & DescOwnByDma) { ++ break; ++ } ++ ++ /* Release sk_buff associated with completed transmit */ ++ skb = (struct sk_buff *)AE531X_DESC_SWPTR_GET(txDesc); ++ if (skb) { ++ kfree_skb(skb); ++ AE531X_DESC_SWPTR_SET(txDesc, NULL); ++ } ++ ++ /* Update statistics according to completed transmit desc */ ++ if (cmdsts & DescTxErrors) { ++ AE531X_PRINT(AE531X_DEBUG_ERROR, ++ ("enetmac%d Tx prior error: 0x%8.8x <0x%8.8x> 0x%8.8x\n", ++ MACInfo->unit, ++ cmdsts, ++ DescTxErrors, ++ (int)txDesc)); ++#ifdef DEBUG ++ //my_mvPhyShow(MACInfo->unit); ++ printk ("ae531xMacControl: 0x%08x\tMacFlowControl: 0x%08x\n", ++ ae531x_ReadMacReg(MACInfo, MacControl), ++ ae531x_ReadMacReg(MACInfo, MacFlowControl)); ++#endif ++ MAC_state->stats.tx_errors++; ++ if (cmdsts & (DescTxLateCollision | DescTxExcCollisions)) { ++ MAC_state->stats.tx_aborted_errors++; ++ } ++ if (cmdsts & (DescTxLostCarrier | DescTxNoCarrier)) { ++ MAC_state->stats.tx_carrier_errors++; ++ } ++ } else { ++ MAC_state->stats.tx_bytes += AE531X_DESC_STATUS_RX_SIZE(cmdsts); ++ MAC_state->stats.tx_packets++; ++ } ++ ++ MAC_state->stats.collisions += ++ ((cmdsts & DescTxCollMask) >> DescTxCollShift); ++ ++ txq->reapDescAddr = txDesc; ++ reaped++; ++ } ++ ++ if (reaped > 0) { ++ int i; ++ ++#ifdef DEBUG ++ if (reaped > aeMaxReap) { ++ aeMaxReap = reaped; ++ printk("max reaped = %d\n", reaped); ++ } ++#endif ++ AE531X_PRINT(AE531X_DEBUG_TX_REAP, ++ ("reaped %d\n", reaped)); ++ ++ /* ++ * Re-start transmit queues for all ethernet devices ++ * associated with this MAC. ++ */ ++ for (i=0; idev_sw_state[i]->dev) ++ netif_start_queue(MAC_state->dev_sw_state[i]->dev); ++ } ++ } else { ++ aeUselessReap++; ++ } ++ ++ LEAVE(); ++} ++ ++ ++/******************************************************************************* ++* ae531x_MAC_start_xmit sends a packet. ++*/ ++static int ++ae531x_MAC_start_xmit(struct sk_buff *skb, struct net_device *dev) ++{ ++ ae531x_dev_sw_state_t *dev_sw_state; ++ ae531x_MAC_state_t *MAC_state; ++ ae531x_MAC_t *MACInfo; ++ u32 buf; ++ u32 ctrlen; ++ u32 length; ++ int mtu; ++ int max_buf_size; ++ VIRT_ADDR txDesc; ++ ++ ARRIVE(); ++ ++ dev_sw_state = (ae531x_dev_sw_state_t *)dev->priv; ++ MAC_state = dev_sw_state->MAC_state; ++ MACInfo = &MAC_state->MACInfo; ++ ++ length = skb->len; ++ ++ /* Check if this port is up, else toss packet */ ++ if (!MACInfo->port_is_up) { ++ buf = virt_to_bus(skb->data); ++ AE531X_PRINT(AE531X_DEBUG_ERROR, ++ ("eth%d Tx Down, dropping buf=0x%8.8x, length=0x%8.8x, skb=%p\n", ++ dev_sw_state->enetUnit, buf, length, (void *)skb)); ++ ++ MAC_state->stats.tx_dropped++; ++ MAC_state->stats.tx_carrier_errors++; ++ goto dropFrame; ++ } ++ ++ if (ae531x_IsInResetMode(MACInfo)) { ++ AE531X_PRINT(AE531X_DEBUG_ERROR, ++ ("eth%d Tx: In Chip reset - drop frame\n", ++ dev_sw_state->enetUnit)); ++ ++ MAC_state->stats.tx_dropped++; ++ MAC_state->stats.tx_aborted_errors++; ++ goto dropFrame; ++ } ++ ++ /* Check if we can transport this packet */ ++ length = max((u32)60, length); /* total length */ ++ mtu = dev->mtu; ++ max_buf_size = mtu + ETH_HLEN; ++ if (length > max_buf_size) { ++ AE531X_PRINT(AE531X_DEBUG_ERROR, ++ ("eth%d Tx: length %d too long. mtu=%d, trailer=%d\n", ++ dev_sw_state->enetUnit, length, mtu, PHY_TRAILER_SIZE)); ++ ++ MAC_state->stats.tx_errors++; ++ MAC_state->stats.tx_aborted_errors++; ++ ++ goto dropFrame; ++ } ++ ++ /* Reap any old, completed Tx descriptors */ ++ ae531x_TxReap(MAC_state); ++ ++ txDesc = MACInfo->txQueue.curDescAddr; ++ if (txDesc == MACInfo->txQueue.reapDescAddr) { ++ int i; ++ ++ AE531X_PRINT(AE531X_DEBUG_ERROR, ++ ("eth%d Tx: cannot get txDesc\n", ++ dev_sw_state->enetUnit)); ++ ++ MAC_state->stats.tx_dropped++; ++ MAC_state->stats.tx_fifo_errors++; ++ ++ /* ++ * Stop transmit queues for any ethernet devices ++ * associated with this MAC. ++ */ ++#if 0 /* XXX: no way to recover from queue stop until ae531x_MAC_tx_timeout() ++ * is rewritten to avoid calls to shedule(). ++ */ ++ for (i=0; idev_sw_state[i]->dev) ++ netif_stop_queue(MAC_state->dev_sw_state[i]->dev); ++ } ++#endif ++ goto dropFrame; ++ } ++ ++ /* We won't fail now; so consume this descriptor */ ++ AE531X_CONSUME_DESC((&MACInfo->txQueue)); ++ ++ /* Update the descriptor */ ++ buf = virt_to_bus(skb->data); ++ AE531X_DESC_BUFPTR_SET(txDesc, buf); ++ AE531X_DESC_SWPTR_SET(txDesc, skb); ++ ctrlen = AE531X_DESC_CTRLEN_GET(txDesc); ++ ctrlen = (ctrlen & (DescEndOfRing)) | ++ DescTxFirst | ++ DescTxLast | ++ DescTxIntEnable; ++ ++ ctrlen |= ((length << DescSize1Shift) & DescSize1Mask); ++ ++ AE531X_DESC_CTRLEN_SET(txDesc, ctrlen); ++ AE531X_DESC_STATUS_SET(txDesc, DescOwnByDma); ++ ++ /* Alert DMA engine to resume Tx */ ++ ae531x_WriteDmaReg(MACInfo, DmaTxPollDemand, 0); ++ sysWbFlush(); ++ ++ AE531X_PRINT(AE531X_DEBUG_TX, ++ ("eth%d Tx: Desc=0x%8.8x, L=0x%8.8x, D=0x%8.8x, d=0x%8.8x, length=0x%8.8x\n", ++ dev_sw_state->enetUnit, ++ (UINT32)txDesc, ++ AE531X_DESC_CTRLEN_GET(txDesc), ++ buf, ++ AE531X_DESC_LNKBUF_GET(txDesc), ++ length)); ++ ++ /* Tell upper layers to keep it coming */ ++ dev->trans_start = jiffies; ++ ++ LEAVE(); ++ ++ return 0; ++ ++dropFrame: ++ kfree_skb(skb); ++ LEAVE(); ++ return 0; ++} ++ ++ ++/******************************************************************************* ++* ae531x_MAC_tx_timeout handles transmit timeouts ++*/ ++static void ++ae531x_MAC_tx_timeout(struct net_device *dev) ++{ ++ ae531x_dev_sw_state_t *dev_sw_state; ++ ae531x_MAC_state_t *MAC_state; ++ ae531x_MAC_t *MACInfo; ++ ++ ARRIVE(); ++ ++ dev_sw_state = (ae531x_dev_sw_state_t *)dev->priv; ++ MAC_state = dev_sw_state->MAC_state; ++ MACInfo = &MAC_state->MACInfo; ++ ++ AE531X_PRINT(AE531X_DEBUG_ERROR, ++ ("enet%d: Tx timeout\n", dev_sw_state->enetUnit)); ++ ++ ae531x_restart(MACInfo); ++ ++ LEAVE(); ++} ++ ++ ++/******************************************************************************* ++* ae531x_MAC_do_ioctl is a placeholder for future ioctls. ++*/ ++static int ++ae531x_MAC_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) ++{ ++ int rv; ++ ae531x_MAC_t *MACInfo; ++ struct ioctl_data { ++ u32 unit; ++ u32 addr; ++ u32 data; ++ } *req; ++ ae531x_dev_sw_state_t *dev_sw_state; ++ ae531x_MAC_state_t *MAC_state; ++ ++ ARRIVE(); ++ ++ dev_sw_state = (ae531x_dev_sw_state_t *)dev->priv; ++ MAC_state = dev_sw_state->MAC_state; ++ MACInfo = &MAC_state->MACInfo; ++ ++ req = (struct ioctl_data *)ifr->ifr_data; ++ ++ switch( cmd ) { ++ default: ++ AE531X_PRINT(AE531X_DEBUG_ERROR, ++ ("Unsupported ioctl: 0x%x\n", cmd)); ++ rv = -EOPNOTSUPP; ++ } ++ ++ LEAVE(); ++ return rv; ++} ++ ++static void ++ae531x_MAC_setup_fntable(struct net_device *dev) ++{ ++ ARRIVE(); ++ ++ dev->get_stats = ae531x_MAC_get_stats; ++ dev->open = ae531x_MAC_open; ++ dev->stop = ae531x_MAC_stop; ++ dev->hard_start_xmit = ae531x_MAC_start_xmit; ++ dev->do_ioctl = ae531x_MAC_do_ioctl; ++ dev->poll = ae531x_MAC_poll; ++ dev->weight = 16; ++#if 0 /* XXX: currently, ae531x_MAC_tx_timeout() will call functions ++ * that in turn call schedule(). this is BAD, since the ++ * timeout call runs at interrupt time. until ae531x_MAC_tx_timeout ++ * is rewritten to avoid schedule() calls, we do not use it. ++ */ ++ dev->tx_timeout = ae531x_MAC_tx_timeout; ++#else ++ dev->tx_timeout = NULL; ++#endif ++ dev->features = NETIF_F_HW_CSUM |\ ++ NETIF_F_HIGHDMA; ++ ++ LEAVE(); ++} ++ ++static void ++ar5312EepromRead(char *EepromAddr, u_int16_t id, unsigned int off, ++ unsigned int nbytes, char *data) ++{ ++ int i; ++ ++ for (i=0; i>8) & ++ (AR531X_REV_MAJ | AR531X_REV_MIN))); ++ switch (devid) { ++ case AR5212_AR5312_REV2: ++ case AR5212_AR5312_REV7: ++ /* Need to determine if we have a 5312 or a 2312 since they ++ have the same Silicon Rev ID*/ ++ ar5312EepromRead(radioConfig,0,2*AR531X_RADIO_MASK_OFF,2, ++ (char *) &radioMask); ++ if ((radioMask & AR531X_RADIO0_MASK) != 0) { ++ return 2; ++ } ++ return 1; ++ case AR5212_AR2313_REV8: ++ return 1; ++ } ++ ++ /* default to 1 */ ++ return 1; ++} ++ ++BOOL ++ae531x_twisted_enet(void) ++{ ++ int wisoc_revision; ++ ++ wisoc_revision = (sysRegRead(AR531X_REV) & AR531X_REV_MAJ) >> AR531X_REV_MAJ_S; ++ if ( (wisoc_revision == AR531X_REV_MAJ_AR2313) || ++ /* next clause is used to determine AR2312, based on number of MACs. ++ * must do this since revision is same for 5312 and 2312. ++ */ ++ (wisoc_revision == AR531X_REV_MAJ_AR5312 && ae531x_get_numMACs() == 1) ) { ++ return TRUE; ++ } else { ++ return FALSE; ++ } ++} ++ ++int ++ae531x_get_board_config(void) ++{ ++ int dataFound; ++ char *bd_config; ++ ++ /* ++ * Find start of Board Configuration data, using heuristics: ++ * Search back from the (aliased) end of flash by 0x1000 bytes ++ * at a time until we find the string "5311", which marks the ++ * start of Board Configuration. Give up if we've searched ++ * more than 500KB. ++ */ ++ dataFound = 0; ++ for (bd_config = (char *)0xbffff000; ++ bd_config > (char *)0xbff80000; ++ bd_config -= 0x1000) ++ { ++ if ( *(int *)bd_config == AR531X_BD_MAGIC) { ++ dataFound = 1; ++ break; ++ } ++ } ++ ++ if (!dataFound) { ++ printk("Could not find Board Configuration Data\n"); ++ bd_config = NULL; ++ } ++ ++ ar531x_boardConfig = (struct ar531x_boarddata *) bd_config; ++ ++ return(dataFound); ++} ++ ++int ++ae531x_get_radio_config(void) ++{ ++ int dataFound; ++ char *radio_config; ++ ++ /* ++ * Now find the start of Radio Configuration data, using heuristics: ++ * Search forward from Board Configuration data by 0x1000 bytes ++ * at a time until we find non-0xffffffff. ++ */ ++ dataFound = 0; ++ for (radio_config = ((char *) ar531x_boardConfig) + 0x1000; ++ radio_config < (char *)0xbffff000; ++ radio_config += 0x1000) ++ { ++ if (*(int *)radio_config != 0xffffffff) { ++ dataFound = 1; ++ break; ++ } ++ } ++ ++ if (!dataFound) { /* AR2316 relocates radio config to new location */ ++ dataFound = 0; ++ for (radio_config = ((char *) ar531x_boardConfig) + 0xf8; ++ radio_config < (char *)0xbffff0f8; ++ radio_config += 0x1000) ++ { ++ if (*(int *)radio_config != 0xffffffff) { ++ dataFound = 1; ++ break; ++ } ++ } ++ } ++ ++ if (!dataFound) { ++ printk("Could not find Radio Configuration data\n"); ++ radio_config = NULL; ++ } ++ radioConfig = radio_config; ++ return(dataFound); ++} ++ ++static int __init ++ae531x_MAC_setup(void) ++{ ++ int next_dev, i; ++ struct net_device *dev; ++ ae531x_dev_sw_state_t *dev_sw_state; ++ ae531x_MAC_state_t *MAC_state; ++ ae531x_MAC_t *MACInfo; ++ char *addr; ++ ++ ARRIVE(); ++ ++ MOD_INC_USE_COUNT; ++ for (i=0;i=0; ++ i++, next_dev--){ ++ ++ /* if MAC is bogus in config data, skip */ ++ addr = ae531x_enet_mac_address_get(next_dev); ++ if((*(u32 *)addr == 0xffffffff) && (*(u16 *)(addr+4)==0xffff)){ ++ /* bogus MAC config data */ ++ continue; ++ } ++ ++ dev = ae531x_MAC_dev[next_dev] = ++ init_etherdev(NULL, sizeof(ae531x_dev_sw_state_t)); ++ ++ if (dev == NULL) { ++ LEAVE(); ++ return -1; ++ } ++ ++ ae531x_MAC_setup_fntable(dev); ++ ++ dev_sw_state = (ae531x_dev_sw_state_t *)dev->priv; ++ dev_sw_state->enetUnit = next_dev; ++ dev_sw_state->unit_on_MAC = 0; ++ MAC_state = &per_MAC_info[next_dev]; ++ dev_sw_state->MAC_state = MAC_state; ++ MAC_state->dev_sw_state[AE531X_LAN_PORT] = dev_sw_state; ++ MAC_state->primary_dev = -1; ++ ++ /* Initialize per-MAC information */ ++ MACInfo = &MAC_state->MACInfo; ++ ++ MACInfo->unit = next_dev; ++ ++ if (MACInfo->unit == 0) { ++ MACInfo->macBase = (u32)(PHYS_TO_K1(AR531X_ENET0)+AE531X_MAC_OFFSET); ++ MACInfo->dmaBase = (u32)(PHYS_TO_K1(AR531X_ENET0)+AE531X_DMA_OFFSET); ++ MACInfo->phyBase = (u32)(PHYS_TO_K1(AR531X_ENET0)+AE531X_PHY_OFFSET); ++ MAC_state->irq = AR531X_IRQ_ENET0_INTRS; ++ } else { ++#ifndef CONFIG_AR5315 ++ MACInfo->macBase = (u32) (PHYS_TO_K1(AR531X_ENET1)+AE531X_MAC_OFFSET); ++ MACInfo->dmaBase = (u32) (PHYS_TO_K1(AR531X_ENET1)+AE531X_DMA_OFFSET); ++ if (ae531x_twisted_enet()) { ++ MACInfo->phyBase = (u32)(PHYS_TO_K1(AR531X_ENET0)+AE531X_PHY_OFFSET); ++ } else { ++ MACInfo->phyBase = (u32)(PHYS_TO_K1(AR531X_ENET1)+AE531X_PHY_OFFSET); ++ } ++ MAC_state->irq = AR531X_IRQ_ENET1_INTRS; ++#endif ++ } ++ ++ MACInfo->OSinfo = (void *)MAC_state; ++ ++ } ++ ++ LEAVE(); ++ return 0; ++} ++module_init(ae531x_MAC_setup); ++ ++/******************************************************************************* ++* ae531x_MAC_unload is the module unload function ++*/ ++static void __exit ++ae531x_MAC_unload(void) ++{ ++ int i; ++ ++ for (i=0;ipriv)->dev) != NULL) ++ ae531x_MAC_stop(ae531x_MAC_dev[i]); ++ ae531x_MAC_dev[i] = NULL; ++ } ++ } ++ MOD_DEC_USE_COUNT; ++} ++ ++MODULE_AUTHOR("Atheros Communications, Inc."); ++MODULE_DESCRIPTION("Support for Atheros WiSoC Ethernet device"); ++#ifdef MODULE_LICENSE ++MODULE_LICENSE("Atheros"); ++#endif ++module_exit(ae531x_MAC_unload); +diff -urN linux-mips-orig/drivers/net/ath/ae531xmac.c linux-mips-new/drivers/net/ath/ae531xmac.c +--- linux-mips-orig/drivers/net/ath/ae531xmac.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-mips-new/drivers/net/ath/ae531xmac.c 2005-12-31 12:33:57.673538824 +0000 +@@ -0,0 +1,951 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved. ++ */ ++ ++ ++/* ++ * Ethernet driver for Atheros' ae531x ethernet MAC. ++ */ ++ ++#if linux ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "ar531xlnx.h" ++#endif /* linux */ ++ ++#include "ae531xreg.h" ++#include "ae531xmac.h" ++ ++#ifdef DEBUG ++int ae531x_MAC_debug = AE531X_DEBUG_ERROR; ++#else ++int ae531x_MAC_debug = 0; ++#endif ++ ++extern char *ae531x_enet_mac_address_get(int); ++ ++/* Forward references to local functions */ ++static void ae531x_QueueDestroy(AE531X_QUEUE *q); ++ ++ ++/****************************************************************************** ++* ++* ae531x_ReadMacReg - read AE MAC register ++* ++* RETURNS: register value ++*/ ++UINT32 ++ae531x_ReadMacReg(ae531x_MAC_t *MACInfo, UINT32 reg) ++{ ++ UINT32 addr = MACInfo->macBase+reg; ++ UINT32 data; ++ ++ data = RegRead(addr); ++ return data; ++} ++ ++ ++/****************************************************************************** ++* ++* ae531x_WriteMacReg - write AE MAC register ++* ++* RETURNS: N/A ++*/ ++void ++ae531x_WriteMacReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 data) ++{ ++ UINT32 addr = MACInfo->macBase+reg; ++ ++ RegWrite(data, addr); ++} ++ ++ ++/****************************************************************************** ++* ++* ae531x_SetMacReg - set bits in AE MAC register ++* ++* RETURNS: N/A ++*/ ++void ++ae531x_SetMacReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 val) ++{ ++ UINT32 addr = MACInfo->macBase+reg; ++ UINT32 data = RegRead(addr); ++ ++ data |= val; ++ RegWrite(data, addr); ++} ++ ++ ++/****************************************************************************** ++* ++* ae531x_ClearMacReg - clear bits in AE MAC register ++* ++* RETURNS: N/A ++*/ ++void ++ae531x_ClearMacReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 val) ++{ ++ UINT32 addr = MACInfo->macBase+reg; ++ UINT32 data = RegRead(addr); ++ ++ data &= ~val; ++ RegWrite(data, addr); ++} ++ ++ ++/****************************************************************************** ++* ++* ae531x_ReadDmaReg - read AE DMA register ++* ++* RETURNS: register value ++*/ ++UINT32 ++ae531x_ReadDmaReg(ae531x_MAC_t *MACInfo, UINT32 reg) ++{ ++ UINT32 addr = MACInfo->dmaBase+reg; ++ UINT32 data = RegRead(addr); ++ ++ return data; ++} ++ ++ ++/****************************************************************************** ++* ++* ae531x_WriteDmaReg - write AE DMA register ++* ++* RETURNS: N/A ++*/ ++void ++ae531x_WriteDmaReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 data) ++{ ++ UINT32 addr = MACInfo->dmaBase+reg; ++ ++ RegWrite(data, addr); ++} ++ ++ ++/****************************************************************************** ++ * ++ * ae531x_AckIntr - clear interrupt bits in the status register. ++ * Note: Interrupt bits are *cleared* by writing a 1. ++ */ ++void ++ae531x_AckIntr(ae531x_MAC_t *MACInfo, UINT32 data) ++{ ++ ae531x_WriteDmaReg(MACInfo, DmaStatus, data); ++} ++ ++ ++/****************************************************************************** ++* ++* ae531x_SetDmaReg - set bits in an AE DMA register ++* ++* RETURNS: N/A ++*/ ++void ++ae531x_SetDmaReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 val) ++{ ++ UINT32 addr = MACInfo->dmaBase+reg; ++ UINT32 data = RegRead(addr); ++ ++ data |= val; ++ RegWrite(data, addr); ++} ++ ++ ++/****************************************************************************** ++* ++* ae531x_ClearDmaReg - clear bits in an AE DMA register ++* ++* RETURNS: N/A ++*/ ++void ++ae531x_ClearDmaReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 val) ++{ ++ UINT32 addr = MACInfo->dmaBase+reg; ++ UINT32 data = RegRead(addr); ++ ++ data &= ~val; ++ RegWrite(data, addr); ++} ++ ++ ++/****************************************************************************** ++* ++* ae531x_ReadMiiReg - read PHY registers via AE MAC Mii addr/data registers ++* ++* RETURNS: register value ++*/ ++UINT32 ++ae531x_ReadMiiReg(UINT32 phyBase, UINT32 reg) ++{ ++ UINT32 data; ++ UINT32 addr = phyBase+reg; ++ ++ data = RegRead(addr); ++ return data; ++} ++ ++ ++/****************************************************************************** ++* ++* ae531x_WriteMiiReg - write PHY registers via AE MAC Mii addr/data registers ++* ++* RETURNS: N/A ++*/ ++void ++ae531x_WriteMiiReg(UINT32 phyBase, UINT32 reg, UINT32 data) ++{ ++ UINT32 addr = phyBase+reg; ++ ++ RegWrite(data, addr); ++} ++ ++ ++/****************************************************************************** ++* ++* ae531x_MiiRead - read AE Mii register ++* ++* RETURNS: register value ++*/ ++UINT16 ++ae531x_MiiRead(UINT32 phyBase, UINT32 phyAddr, UINT8 reg) ++{ ++ UINT32 addr; ++ UINT16 data; ++ ++ addr = ((phyAddr << MiiDevShift) & MiiDevMask) | ((reg << MiiRegShift) & MiiRegMask); ++ ++ ae531x_WriteMiiReg(phyBase, MacMiiAddr, addr ); ++ do { ++ /* nop */ ++ } while ((ae531x_ReadMiiReg(phyBase, MacMiiAddr ) & MiiBusy) == MiiBusy); ++ ++ data = ae531x_ReadMiiReg(phyBase, MacMiiData) & 0xFFFF; ++ ++ return data; ++} ++ ++ ++/****************************************************************************** ++* ++* ae531x_MiiWrite - write AE Mii register ++* ++* RETURNS: N/A ++*/ ++void ++ae531x_MiiWrite(UINT32 phyBase, UINT32 phyAddr, UINT8 reg, UINT16 data) ++{ ++ UINT32 addr; ++ ++ ae531x_WriteMiiReg(phyBase, MacMiiData, data ); ++ ++ addr = ((phyAddr << MiiDevShift) & MiiDevMask) | ++ ((reg << MiiRegShift) & MiiRegMask) | MiiWrite; ++ ae531x_WriteMiiReg(phyBase, MacMiiAddr, addr ); ++ ++ do { ++ /* nop */ ++ } while ((ae531x_ReadMiiReg(phyBase, MacMiiAddr ) & MiiBusy) == MiiBusy); ++} ++ ++ ++/******************************************************************************* ++* ae531x_BeginResetMode - enter a special "reset mode" in which ++* -no interrupts are expected from the device ++* -the device will not transmit nor receive ++* -attempts to send or receive will return with an error and ++* -the device will be reset at the next convenient opportunity. ++*/ ++void ++ae531x_BeginResetMode(ae531x_MAC_t *MACInfo) ++{ ++ /* Set the reset flag */ ++ MACInfo->aeProcessRst = 1; ++} ++ ++ ++/******************************************************************************* ++* ae531x_EndResetMode - exit the special "reset mode" entered ++* earlier via a call to ae531x_BeginResetMode. ++*/ ++void ++ae531x_EndResetMode(ae531x_MAC_t *MACInfo) ++{ ++ MACInfo->aeProcessRst = 0; ++} ++ ++ ++/******************************************************************************* ++* ae531x_IsInResetMode - determine whether or not the device is ++* currently in "reset mode" (i.e. that a device reset is pending) ++*/ ++BOOL ++ae531x_IsInResetMode(ae531x_MAC_t *MACInfo) ++{ ++ return MACInfo->aeProcessRst; ++} ++ ++ ++/****************************************************************************** ++* ++* ae531x_DmaRxStart - Start Rx ++* ++* RETURNS: N/A ++*/ ++static void ++ae531x_DmaRxStart(ae531x_MAC_t *MACInfo) ++{ ++ ae531x_SetDmaReg(MACInfo, DmaControl, DmaRxStart); ++ sysWbFlush(); ++} ++ ++ ++/****************************************************************************** ++* ++* ae531x_DmaRxStop - Stop Rx ++* ++* RETURNS: N/A ++*/ ++void ++ae531x_DmaRxStop(ae531x_MAC_t *MACInfo) ++{ ++ ae531x_ClearDmaReg(MACInfo, DmaControl, DmaRxStart); ++ sysWbFlush(); ++} ++ ++ ++/****************************************************************************** ++* ++* ae531x_DmaTxStart - Start Tx ++* ++* RETURNS: N/A ++*/ ++void ++ae531x_DmaTxStart(ae531x_MAC_t *MACInfo) ++{ ++ ae531x_SetDmaReg(MACInfo, DmaControl, DmaTxStart); ++ sysWbFlush(); ++} ++ ++ ++/****************************************************************************** ++* ++* ae531x_DmaTxStop - Stop Tx ++* ++* RETURNS: N/A ++*/ ++void ++ae531x_DmaTxStop(ae531x_MAC_t *MACInfo) ++{ ++ ae531x_ClearDmaReg(MACInfo, DmaControl, DmaTxStart); ++ sysWbFlush(); ++} ++ ++ ++/****************************************************************************** ++* ++* ae531x_DmaIntEnable - Enable DMA interrupts ++* ++* RETURNS: N/A ++*/ ++void ++ae531x_DmaIntEnable(ae531x_MAC_t *MACInfo) ++{ ++ ae531x_WriteDmaReg(MACInfo, DmaIntrEnb, DmaIntEnable); ++} ++ ++ ++/****************************************************************************** ++* ++* ae531x_DmaIntDisable - Disable DMA interrupts ++* ++* RETURNS: N/A ++*/ ++void ++ae531x_DmaIntDisable(ae531x_MAC_t *MACInfo) ++{ ++ ae531x_WriteDmaReg(MACInfo, DmaIntrEnb, DmaIntDisable); ++} ++ ++ ++/****************************************************************************** ++* ++* ae531x_DmaIntClear - Clear DMA interrupts ++* ++* RETURNS: N/A ++*/ ++static void ++ae531x_DmaIntClear(ae531x_MAC_t *MACInfo) ++{ ++ /* clear all interrupt requests */ ++ ae531x_WriteDmaReg(MACInfo, DmaStatus, ++ ae531x_ReadDmaReg(MACInfo, DmaStatus)); ++} ++ ++ ++/****************************************************************************** ++* Initialize generic queue data ++*/ ++void ++ae531x_QueueInit(AE531X_QUEUE *q, char *pMem, int count) ++{ ++ ARRIVE(); ++ q->firstDescAddr = pMem; ++ q->lastDescAddr = (VIRT_ADDR)((UINT32)q->firstDescAddr + ++ (count - 1) * AE531X_QUEUE_ELE_SIZE); ++ q->curDescAddr = q->firstDescAddr; ++ q->count = count; ++ LEAVE(); ++} ++ ++ ++/****************************************************************************** ++* ae531x_TxQueueCreate - create a circular queue of descriptors for Transmit ++*/ ++static int ++ae531x_TxQueueCreate(ae531x_MAC_t *MACInfo, ++ AE531X_QUEUE *q, ++ char *pMem, ++ int count) ++{ ++ int i; ++ VIRT_ADDR descAddr; ++ ++ ARRIVE(); ++ ++ ae531x_QueueInit(q, pMem, count); ++ q->reapDescAddr = q->lastDescAddr; ++ ++ /* Initialize Tx buffer descriptors. */ ++ for (i=0, descAddr=q->firstDescAddr; ++ ilastDescAddr, ++ DescEndOfRing|AE531X_DESC_CTRLEN_GET(q->lastDescAddr)); ++ ++ AE531X_PRINT(AE531X_DEBUG_RESET, ++ ("ethmac%d Txbuf begin = %x, end = %x\n", ++ MACInfo->unit, ++ (UINT32)q->firstDescAddr, ++ (UINT32)q->lastDescAddr)); ++ ++ LEAVE(); ++ return 0; ++} ++ ++ ++/****************************************************************************** ++* ae531x_RxQueueCreate - create a circular queue of Rx descriptors ++*/ ++int ++ae531x_RxQueueCreate(ae531x_MAC_t *MACInfo, ++ AE531X_QUEUE *q, ++ char *pMem, ++ int count) ++{ ++ int i; ++ VIRT_ADDR descAddr; ++ ++ ARRIVE(); ++ ++ ae531x_QueueInit(q, pMem, count); ++ q->reapDescAddr = NULL; ++ ++ ++ /* Initialize Rx buffer descriptors */ ++ for (i=0, descAddr=q->firstDescAddr; ++ iunit)); ++ ae531x_QueueDestroy(q); ++ return -1; ++ } ++ AE531X_DESC_SWPTR_SET(descAddr, swptr); ++ ++ AE531X_DESC_STATUS_SET(descAddr, DescOwnByDma); ++ AE531X_DESC_CTRLEN_SET(descAddr, rxBufferSize); ++ AE531X_DESC_BUFPTR_SET(descAddr, virt_to_bus(rxBuffer)); ++ AE531X_DESC_LNKBUF_SET(descAddr, (UINT32)0); ++ } /* for each desc */ ++ ++ /* Make the queue circular */ ++ AE531X_DESC_CTRLEN_SET(q->lastDescAddr, ++ DescEndOfRing|AE531X_DESC_CTRLEN_GET(q->lastDescAddr)); ++ ++ AE531X_PRINT(AE531X_DEBUG_RESET, ++ ("ethmac%d Rxbuf begin = %x, end = %x\n", ++ MACInfo->unit, ++ (UINT32)q->firstDescAddr, ++ (UINT32)q->lastDescAddr)); ++ ++ LEAVE(); ++ return 0; ++} ++ ++ ++/****************************************************************************** ++* ae531x_QueueDestroy -- Free all buffers and descriptors associated ++* with a queue. ++*/ ++static void ++ae531x_QueueDestroy(AE531X_QUEUE *q) ++{ ++ int i; ++ int count; ++ VIRT_ADDR descAddr; ++ ++ ARRIVE(); ++ ++ count = q->count; ++ ++ for (i=0, descAddr=q->firstDescAddr; ++ itxQueue); ++} ++ ++static void ++ae531x_RxQueueDestroy(ae531x_MAC_t *MACInfo) ++{ ++ ae531x_QueueDestroy(&MACInfo->rxQueue); ++} ++ ++ ++/****************************************************************************** ++* ae531x_AllocateQueues - Allocate receive and transmit queues ++*/ ++int ++ae531x_AllocateQueues(ae531x_MAC_t *MACInfo) ++{ ++ size_t QMemSize; ++ char *pTxBuf = NULL; ++ char *pRxBuf = NULL; ++ ++ ARRIVE(); ++ ++ MACInfo->txDescCount = AE531X_TX_DESC_COUNT_DEFAULT; ++ QMemSize = AE531X_QUEUE_ELE_SIZE * MACInfo->txDescCount; ++ pTxBuf = MALLOC(QMemSize); ++ if (pTxBuf == NULL) { ++ AE531X_PRINT(AE531X_DEBUG_RESET, ++ ("ethmac%d Failed to allocate TX queue\n", MACInfo->unit)); ++ goto AllocQFail; ++ } ++ ++ if (ae531x_TxQueueCreate(MACInfo, &MACInfo->txQueue, pTxBuf, ++ MACInfo->txDescCount) < 0) ++ { ++ AE531X_PRINT(AE531X_DEBUG_RESET, ++ ("ethmac%d Failed to create TX queue\n", MACInfo->unit)); ++ goto AllocQFail; ++ } ++ ++ MACInfo->rxDescCount = AE531X_RX_DESC_COUNT_DEFAULT; ++ QMemSize = AE531X_QUEUE_ELE_SIZE * MACInfo->rxDescCount; ++ pRxBuf = MALLOC(QMemSize); ++ if (pRxBuf == NULL) { ++ AE531X_PRINT(AE531X_DEBUG_RESET, ++ ("ethmac%d Failed to allocate RX queue\n", MACInfo->unit)); ++ goto AllocQFail; ++ } ++ ++ if (ae531x_RxQueueCreate(MACInfo, &MACInfo->rxQueue, pRxBuf, ++ MACInfo->rxDescCount) < 0) ++ { ++ AE531X_PRINT(AE531X_DEBUG_RESET, ++ ("ethmac%d Failed to create RX queue\n", MACInfo->unit)); ++ goto AllocQFail; ++ } ++ ++ AE531X_PRINT(AE531X_DEBUG_RESET, ++ ("ethmac%d Memory setup complete.\n", MACInfo->unit)); ++ ++ LEAVE(); ++ return 0; ++ ++AllocQFail: ++ MACInfo->txDescCount = 0; /* sanity */ ++ MACInfo->rxDescCount = 0; /* sanity */ ++ ++ if (pTxBuf) { ++ FREE(pTxBuf); ++ } ++ if (pRxBuf) { ++ FREE(pRxBuf); ++ } ++ ++ LEAVE(); ++ return -1; ++} ++ ++ ++/****************************************************************************** ++* ++* ae531x_FreeQueues - Free Transmit & Receive queues ++*/ ++void ++ae531x_FreeQueues(ae531x_MAC_t *MACInfo) ++{ ++ ae531x_TxQueueDestroy(MACInfo); ++ FREE(MACInfo->txQueue.firstDescAddr); ++ ++ ae531x_RxQueueDestroy(MACInfo); ++ FREE(MACInfo->rxQueue.firstDescAddr); ++} ++ ++/****************************************************************************** ++* ++* ae531x_DmaReset - Reset DMA and TLI controllers ++* ++* RETURNS: N/A ++*/ ++void ++ae531x_DmaReset(ae531x_MAC_t *MACInfo) ++{ ++ int i; ++ UINT32 descAddr; ++ ++ ARRIVE(); ++ ++ /* Disable device interrupts prior to any errors during stop */ ++ intDisable(MACInfo->ilevel); ++ ++ /* Disable MAC rx and tx */ ++ ae531x_ClearMacReg(MACInfo, MacControl, (MacRxEnable | MacTxEnable)); ++ ++ udelay(1); ++ ++ /* Reset dma controller */ ++ ++ ae531x_WriteDmaReg(MACInfo, DmaBusMode, DmaResetOn); ++ ++ /* Delay 2 usec */ ++ sysUDelay(2); ++ ++ /* Flush the rx queue */ ++ descAddr = (UINT32)MACInfo->rxQueue.firstDescAddr; ++ MACInfo->rxQueue.curDescAddr = MACInfo->rxQueue.firstDescAddr; ++ for (i=0; ++ i<(MACInfo->rxDescCount); ++ i++, descAddr += AE531X_QUEUE_ELE_SIZE) { ++ AE531X_DESC_STATUS_SET(descAddr, DescOwnByDma); ++ } ++ ++ /* Flush the tx queue */ ++ descAddr = (UINT32)MACInfo->txQueue.firstDescAddr; ++ MACInfo->txQueue.curDescAddr = MACInfo->txQueue.firstDescAddr; ++ MACInfo->txQueue.reapDescAddr = MACInfo->txQueue.lastDescAddr; ++ for (i=0; ++ i<(MACInfo->txDescCount); ++ i++, descAddr += AE531X_QUEUE_ELE_SIZE) { ++ AE531X_DESC_STATUS_SET (descAddr, 0); ++ } ++ ++ /* Set init register values */ ++ ae531x_WriteDmaReg(MACInfo, DmaBusMode, DmaBusModeInit); ++ ++ /* Install the first Tx and Rx queues on the device */ ++ ae531x_WriteDmaReg(MACInfo, DmaRxBaseAddr, ++ virt_to_bus(MACInfo->rxQueue.firstDescAddr)); ++ ae531x_WriteDmaReg(MACInfo, DmaTxBaseAddr, ++ virt_to_bus(MACInfo->txQueue.firstDescAddr)); ++ ++ ++ ae531x_WriteDmaReg(MACInfo, DmaControl, DmaStoreAndForward); ++ ++ ae531x_WriteDmaReg(MACInfo, DmaIntrEnb, DmaIntDisable); ++ ++ AE531X_PRINT(AE531X_DEBUG_RESET, ++ ("ethmac%d: DMA RESET!\n", MACInfo->unit)); ++ ++ /* Turn on device interrupts -- enable most errors */ ++ ae531x_DmaIntClear(MACInfo); /* clear interrupt requests */ ++ ae531x_DmaIntEnable(MACInfo); /* enable interrupts */ ++ ++ ae531x_EndResetMode(MACInfo); ++ ++ intEnable(MACInfo->ilevel); ++ ++ LEAVE(); ++} ++ ++ ++/****************************************************************************** ++* ++* ae531x_MACAddressSet - Set the ethernet address ++* ++* Sets the ethernet address according to settings in flash. ++* ++* RETURNS: void ++*/ ++static void ++ae531x_MACAddressSet(ae531x_MAC_t *MACInfo) ++{ ++ unsigned int data; ++ UINT8 *macAddr; ++ ++ ARRIVE(); ++ ++ macAddr = ae531x_enet_mac_address_get(MACInfo->unit); ++ ++ /* set our MAC address */ ++ data = (macAddr[5]<<8) | macAddr[4]; ++ ae531x_WriteMacReg(MACInfo, MacAddrHigh, data ); ++ ++ data = (macAddr[3]<<24) | (macAddr[2]<<16) | (macAddr[1]<<8) | macAddr[0]; ++ ae531x_WriteMacReg(MACInfo, MacAddrLow, data ); ++ ++ AE531X_PRINT(AE531X_DEBUG_RESET, ++ ("ethmac%d Verify MAC address %8.8X %8.8X \n", ++ MACInfo->unit, ++ ae531x_ReadMacReg(MACInfo, MacAddrLow), ++ ae531x_ReadMacReg(MACInfo, MacAddrHigh))); ++ ++ AE531X_PRINT(AE531X_DEBUG_RESET, ++ (" sb = %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n", ++ 0xff&macAddr[0], ++ 0xff&macAddr[1], ++ 0xff&macAddr[2], ++ 0xff&macAddr[3], ++ 0xff&macAddr[4], ++ 0xff&macAddr[5])); ++ LEAVE(); ++} ++ ++ ++/****************************************************************************** ++* ++* ae_SetMACFromPhy - read Phy settings and update Mac ++* with current duplex and speed. ++* ++* RETURNS: ++*/ ++static void ++ae531x_SetMACFromPhy(ae531x_MAC_t *MACInfo) ++{ ++ UINT32 macCtl; ++ BOOL fullDuplex; ++ UINT32 timeout; ++ ++ ARRIVE(); ++ ++ timeout = jiffies+(HZ/1000)*AE531X_NEGOT_TIMEOUT; ++ ++ /* Get duplex mode from Phy */ ++ while (((fullDuplex = phyIsFullDuplex(MACInfo->unit)) == -1) && ++ (jiffies <= timeout)); ++ ++ /* Flag is set for full duplex mode, else cleared */ ++ macCtl = ae531x_ReadMacReg(MACInfo, MacControl); ++ ++ if (fullDuplex) { ++ /* set values of control registers */ ++ macCtl &= ~MacDisableRxOwn; ++ macCtl |= MacFullDuplex; ++ ae531x_WriteMacReg(MACInfo, MacControl, macCtl); ++ ae531x_WriteMacReg(MACInfo, MacFlowControl, MacFlowControlInitFdx); ++ } else { ++ /* set values of control registers */ ++ ae531x_WriteMacReg(MACInfo, MacFlowControl, MacFlowControlInitHdx); ++ macCtl |= MacDisableRxOwn; ++ macCtl &= ~MacFullDuplex; ++ ae531x_WriteMacReg(MACInfo, MacControl, macCtl); ++ } ++ ++ LEAVE(); ++} ++ ++ ++/****************************************************************************** ++* ae531x_MACReset -- sets MAC address and duplex. ++*/ ++void ++ae531x_MACReset(ae531x_MAC_t *MACInfo) ++{ ++ ae531x_MACAddressSet(MACInfo); ++#ifndef CONFIG_AR5315 ++ ae531x_SetMACFromPhy(MACInfo); ++#endif ++} ++ ++ ++/****************************************************************************** ++* ae531x_EnableComm -- enable Transmit and Receive ++*/ ++void ++ae531x_EnableComm(ae531x_MAC_t *MACInfo) ++{ ++ ae531x_SetMacReg(MACInfo, MacControl, (MacRxEnable | MacTxEnable)); ++ ae531x_DmaRxStart(MACInfo); /* start receiver */ ++ ae531x_DmaTxStart(MACInfo); /* start transmitter */ ++} ++ ++ ++/****************************************************************************** ++* ae531x_DisableComm -- disable Transmit and Receive ++*/ ++void ++ae531x_DisableComm(ae531x_MAC_t *MACInfo) ++{ ++ ae531x_ClearMacReg(MACInfo, MacControl, (MacRxEnable | MacTxEnable)); ++} ++ ++ ++/****************************************************************************** ++* ae531x_reset -- Cold reset ethernet interface ++*/ ++void ++ae531x_reset(ae531x_MAC_t *MACInfo) ++{ ++ UINT32 mask = 0; ++ UINT32 regtmp; ++#ifndef CONFIG_AR5315 ++ ++ if (MACInfo->unit == 0) { ++ mask = AR531X_RESET_ENET0 | AR531X_RESET_EPHY0; ++ } else { ++ mask = AR531X_RESET_ENET1 | AR531X_RESET_EPHY1; ++ } ++ ++ /* Put into reset */ ++ regtmp = sysRegRead(AR531X_RESET); ++ sysRegWrite(AR531X_RESET, regtmp | mask); ++ sysMsDelay(15); ++ ++ /* Pull out of reset */ ++ regtmp = sysRegRead(AR531X_RESET); ++ sysRegWrite(AR531X_RESET, regtmp & ~mask); ++ sysUDelay(25); ++ ++ /* Enable */ ++ if (MACInfo->unit == 0) { ++ mask = AR531X_ENABLE_ENET0; ++ } else { ++ mask = AR531X_ENABLE_ENET1; ++ } ++ regtmp = sysRegRead(AR531X_ENABLE); ++ sysRegWrite(AR531X_ENABLE, regtmp | mask); ++#else ++ if (MACInfo->unit == 0) { ++ mask = AR531X_RESET_ENET0 | AR531X_RESET_EPHY0; ++ } ++ /* Enable Arbitration for Ethernet bus */ ++ regtmp = sysRegRead(AR531XPLUS_AHB_ARB_CTL); ++ regtmp |= ARB_ETHERNET; ++ sysRegWrite(AR531XPLUS_AHB_ARB_CTL, regtmp); ++ ++ /* Put into reset */ ++ regtmp = sysRegRead(AR531X_RESET); ++ sysRegWrite(AR531X_RESET, regtmp | mask); ++ sysMsDelay(10); ++ ++ /* Pull out of reset */ ++ regtmp = sysRegRead(AR531X_RESET); ++ sysRegWrite(AR531X_RESET, regtmp & ~mask); ++ sysMsDelay(10); ++ ++ regtmp = sysRegRead(AR531XPLUS_IF_CTL); ++ regtmp |= IF_TS_LOCAL; ++ sysRegWrite(AR531XPLUS_IF_CTL, regtmp); ++#endif ++} ++ ++ ++/****************************************************************************** ++* ae531x_unitLinkLost -- Called from PHY layer to notify the MAC layer ++* that there are no longer any live links associated with a MAC. ++*/ ++void ++ae531x_unitLinkLost(int ethUnit) ++{ ++ AE531X_PRINT(AE531X_DEBUG_LINK_CHANGE, ++ ("enetmac%d link down\n", ethUnit)); ++} ++ ++ ++/****************************************************************************** ++* ae531x_unitLinkGained -- Called from PHY layer to notify the MAC layer ++* that there are 1 or more live links associated with a MAC. ++*/ ++void ++ae531x_unitLinkGained(int ethUnit) ++{ ++#if CONFIG_AR5315 ++#define AE531X_POLL_MILLI_SECONDS 200 ++ ae531x_MAC_t *MACInfo = ae531x_getMAcInfo(ethUnit); ++ while(!MACInfo || !MACInfo->port_is_up) ++ { ++ set_current_state(TASK_UNINTERRUPTIBLE); ++ schedule_timeout((AE531X_POLL_MILLI_SECONDS * HZ)/1000); ++ MACInfo = ae531x_getMAcInfo(ethUnit); ++ } ++ ae531x_SetMACFromPhy(MACInfo); ++#endif ++ AE531X_PRINT(AE531X_DEBUG_LINK_CHANGE, ++ ("enet%d link up\n", ethUnit)); ++} ++ ++/****************************************************************************** ++* ae531x_ethMacDefault -- Called from PHY layer to determine the default ++* ethernet MAC. On some "twisted" platforms, the only usable MAC is 1, ++* while on others the usable MAC is 0. Future boards may allow both MACs ++* to be used; in this case, return -1 to indicate that there IS NO default ++* MAC. ++*/ ++int ++ae531x_ethMacDefault(void) ++{ ++ if (ae531x_twisted_enet()) ++ return 1; ++ ++ return 0; ++ ++} +diff -urN linux-mips-orig/drivers/net/ath/ae531xmac.h linux-mips-new/drivers/net/ath/ae531xmac.h +--- linux-mips-orig/drivers/net/ath/ae531xmac.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-mips-new/drivers/net/ath/ae531xmac.h 2005-12-31 12:33:57.674538672 +0000 +@@ -0,0 +1,229 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved. ++ */ ++ ++/* ++ * See README to understand the decomposition of the ethernet driver. ++ * ++ * This file contains OS-independent pure software definitions for ++ * ethernet support on the AR531X platform. ++ */ ++ ++#ifndef _AE531XMAC_H_ ++#define _AE531XMAC_H_ ++ ++#include ++#include ++ ++/* ++ * DEBUG switches to control verbosity. ++ * Just modify the value of ae531x_MAC_debug. ++ */ ++#define AE531X_DEBUG_ALL 0xffffffff ++#define AE531X_DEBUG_ERROR 0x00000001 /* Unusual conditions and Errors */ ++#define AE531X_DEBUG_ARRIVE 0x00000002 /* Arrive into a function */ ++#define AE531X_DEBUG_LEAVE 0x00000004 /* Leave a function */ ++#define AE531X_DEBUG_RESET 0x00000008 /* Reset */ ++#define AE531X_DEBUG_TX 0x00000010 /* Transmit */ ++#define AE531X_DEBUG_TX_REAP 0x00000020 /* Transmit Descriptor Reaping */ ++#define AE531X_DEBUG_RX 0x00000040 /* Receive */ ++#define AE531X_DEBUG_RX_STOP 0x00000080 /* Receive Early Stop */ ++#define AE531X_DEBUG_INT 0x00000100 /* Interrupts */ ++#define AE531X_DEBUG_LINK_CHANGE 0x00000200 /* PHY Link status changed */ ++ ++#define AE531X_NEGOT_TIMEOUT 500 /* ms to wait for autonegotiation */ ++ ++extern int ae531x_MAC_debug; ++ ++#define AE531X_PRINT(FLG, X) \ ++{ \ ++ if (ae531x_MAC_debug & (FLG)) { \ ++ DEBUG_PRINTF("%s#%d:%s ", \ ++ __FILE__, \ ++ __LINE__, \ ++ __FUNCTION__); \ ++ DEBUG_PRINTF X; \ ++ } \ ++} ++ ++#define ARRIVE() AE531X_PRINT(AE531X_DEBUG_ARRIVE, ("Arrive{\n")) ++#define LEAVE() AE531X_PRINT(AE531X_DEBUG_LEAVE, ("}Leave\n")) ++ ++#define RegRead(addr) \ ++ (*(volatile unsigned int *)(addr)) ++ ++#define RegWrite(val,addr) \ ++ ((*(volatile unsigned int *)(addr)) = (val)) ++ ++/***************************************************************** ++ * Phy code is broken out into a separate layer, so that different ++ * PHY hardware can easily be supported. ++ * ++ * These functions are provided by the PHY layer for use by the MAC layer. ++ * phySetup -- Set phy hardware appropriately for a MAC unit ++ * ++ * phyCheckStatusChange -- Look for dropped/initiated links on any ++ * phy port associated with a MAC unit ++ * ++ * phyIsSpeed100 -- Determines whether or not a PHY is up and ++ * running at 100Mbit ++ * ++ * phyIsFullDuplex -- Determines whether or not a PHY is up and ++ * running in Full Duplex mode ++ * ++ */ ++#if CONFIG_MARVELL_ENET_PHY ++/* ++ * Mapping of generic phy APIs to Marvell Ethernet Switch phy functions. ++ */ ++#include "mvPhy.h" ++#define phySetup(ethUnit, phyBase) mv_phySetup((ethUnit), (phyBase)) ++#define phyCheckStatusChange(ethUnit) mv_phyCheckStatusChange(ethUnit) ++#define phyIsSpeed100(ethUnit) mv_phyIsSpeed100(ethUnit) ++#define phyIsFullDuplex(ethUnit) mv_phyIsFullDuplex(ethUnit) ++ ++#if CONFIG_VENETDEV ++#define PHY_TRAILER_SIZE MV_PHY_TRAILER_SIZE ++extern void mv_phyDetermineSource(char *data, int len, int *pFromLAN); ++extern void mv_phySetDestinationPort(char *data, int len, int fromLAN); ++#define phyDetermineSource(data, len, pFromLAN) mv_phyDetermineSource((data), (len), (pFromLAN)) ++#define phySetDestinationPort(data, len, fromLAN) mv_phySetDestinationPort((data), (len), (fromLAN)) ++#else ++#define PHY_TRAILER_SIZE 0 ++#endif ++#endif /* CONFIG_MARVELL_ENET_PHY */ ++ ++#if CONFIG_KENDIN_ENET_PHY || CONFIG_REALTEK_ENET_PHY || CONFIG_KENDIN_KS8995XA_ENET_PHY ++/* ++ * Mapping of generic phy APIs to Kendin KS8721B and RealTek RTL8201BL phys. ++ */ ++#include "rtPhy.h" ++#define phySetup(ethUnit, phyBase) rt_phySetup((ethUnit), (phyBase)) ++#define phyCheckStatusChange(ethUnit) rt_phyCheckStatusChange(ethUnit) ++#define phyIsSpeed100(ethUnit) rt_phyIsSpeed100(ethUnit) ++#define phyIsFullDuplex(ethUnit) rt_phyIsFullDuplex(ethUnit) ++#endif ++ ++#if CONFIG_ICPLUS_ENET_PHY ++/* ++ * Mapping of generic phy APIs to Icplus phys. ++ */ ++#include "ipPhy.h" ++#define phySetup(ethUnit, phyBase) ip_phySetup((ethUnit), (phyBase)) ++#define phyCheckStatusChange(ethUnit) ip_phyCheckStatusChange(ethUnit) ++#define phyIsSpeed100(ethUnit) ip_phyIsSpeed100(ethUnit) ++#define phyIsFullDuplex(ethUnit) ip_phyIsFullDuplex(ethUnit) ++#endif ++ ++#if !defined(PHY_TRAILER_SIZE) ++#define PHY_TRAILER_SIZE 0 ++#endif ++ ++/***************************************************************** ++ * MAC-independent interface to be used by PHY code ++ * ++ * These functions are provided by the MAC layer for use by the PHY layer. ++ */ ++#define phyRegRead ae531x_MiiRead ++#define phyRegWrite ae531x_MiiWrite ++#define phyLinkLost(ethUnit) ae531x_unitLinkLost(ethUnit) ++#define phyLinkGained(ethUnit) ae531x_unitLinkGained(ethUnit) ++#define phyEthMacDefault() ae531x_ethMacDefault() ++ ++void ae531x_unitLinkLost(int unit); ++void ae531x_unitLinkGained(int unit); ++int ae531x_ethMacDefault(void); ++ ++ ++/* ++ * RXBUFF_RESERVE enables building header on WLAN-side in place ++ * NB: Divisible by 2 but NOT 4. Otherwise handle_adel_int() will ++ * be used by the ip layer for misaligned word accesses and ++ * performance will suffer - a lot. ++ */ ++#define ETH_CRC_LEN 4 ++#define RXBUFF_RESERVE 98 ++// #define RXBUFF_RESERVE 98 ++ ++/***************************************************************** ++ * Descriptor queue ++ */ ++typedef struct ae531x_queue { ++ VIRT_ADDR firstDescAddr; /* descriptor array address */ ++ VIRT_ADDR lastDescAddr; /* last descriptor address */ ++ VIRT_ADDR curDescAddr; /* current descriptor address */ ++ VIRT_ADDR reapDescAddr; /* current tail of tx descriptors reaped */ ++ UINT16 count; /* number of elements */ ++} AE531X_QUEUE; ++ ++/* Given a descriptor, return the next one in a circular list */ ++#define AE531X_QUEUE_ELE_NEXT_GET(q, descAddr) \ ++ ((descAddr) == (q)->lastDescAddr) ? (q)->firstDescAddr : \ ++ (VIRT_ADDR)((UINT32)(descAddr) + AE531X_QUEUE_ELE_SIZE) ++ ++/* Move the "current descriptor" forward to the next one */ ++#define AE531X_CONSUME_DESC(q) \ ++ q->curDescAddr = AE531X_QUEUE_ELE_NEXT_GET(q, q->curDescAddr) ++ ++/***************************************************************** ++ * Per-ethernet-MAC OS-independent information ++ */ ++typedef struct ae531x_MAC_s { ++ u32 unit; /* MAC unit ID */ ++ u32 macBase; /* MAC base address */ ++ u32 dmaBase; /* DMA base address */ ++ u32 phyBase; /* PHY base address */ ++ AE531X_QUEUE txQueue; /* Transmit descriptor queue */ ++ AE531X_QUEUE rxQueue; /* Receive descriptor queue */ ++ UINT16 txDescCount; /* Transmit descriptor count */ ++ UINT16 rxDescCount; /* Receive descriptor count */ ++ BOOL aeProcessRst; /* flag to indicate reset in progress */ ++ BOOL port_is_up; /* flag to indicate port is up */ ++ void *OSinfo; /* OS-dependent data */ ++} ae531x_MAC_t; ++ ++#define AE531X_TX_DESC_COUNT_DEFAULT 128 /* Transmit descriptors */ ++#define AE531X_RX_DESC_COUNT_DEFAULT 128 /* Receive descriptors */ ++ ++ ++/***************************************************************** ++ * Interfaces exported by the OS-independent MAC layer ++ */ ++void ae531x_BeginResetMode(ae531x_MAC_t *MACInfo); ++void ae531x_EndResetMode(ae531x_MAC_t *MACInfo); ++BOOL ae531x_IsInResetMode(ae531x_MAC_t *MACInfo); ++int ae531x_RxQueueCreate(ae531x_MAC_t *MACInfo, AE531X_QUEUE *q, ++ char *pMem, int count); ++int ae531x_QueueDelete(struct ae531x_queue *q); ++void ae531x_DmaReset(ae531x_MAC_t *MACInfo); ++void ae531x_MACReset(ae531x_MAC_t *MACInfo); ++void ae531x_EnableComm(ae531x_MAC_t *MACInfo); ++void ae531x_DisableComm(ae531x_MAC_t *MACInfo); ++void ae531x_reset(ae531x_MAC_t *MACInfo); ++int ae531x_AllocateQueues(ae531x_MAC_t *MACInfo); ++void ae531x_FreeQueues(ae531x_MAC_t *MACInfo); ++void ae531x_QueueInit(AE531X_QUEUE *q, char *pMem, int count); ++UINT32 ae531x_ReadMacReg(ae531x_MAC_t *MACInfo, UINT32 reg); ++void ae531x_WriteMacReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 data); ++void ae531x_SetMacReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 val); ++void ae531x_ClearMacReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 val); ++void ae531x_SetDmaReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 val); ++void ae531x_ClearDmaReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 val); ++UINT32 ae531x_ReadDmaReg(ae531x_MAC_t *MACInfo, UINT32 reg); ++void ae531x_WriteDmaReg(ae531x_MAC_t *MACInfo, UINT32 reg, UINT32 data); ++UINT32 ae531x_ReadMiiReg(UINT32 phyBase, UINT32 reg); ++void ae531x_WriteMiiReg(UINT32 phyBase, UINT32 reg, UINT32 data); ++UINT16 ae531x_MiiRead(UINT32 phyBase, UINT32 phyAddr, UINT8 reg); ++void ae531x_MiiWrite(UINT32 phyBase, UINT32 phyAddr, UINT8 reg, UINT16 data); ++void ae531x_DmaIntEnable(ae531x_MAC_t *MACInfo); ++void ae531x_DmaIntDisable(ae531x_MAC_t *MACInfo); ++void ae531x_AckIntr(ae531x_MAC_t *MACInfo, UINT32 val); ++void *ae531x_rxbuf_alloc(ae531x_MAC_t *MACInfo, char **rxBptr, int *rxBSize); ++void ae531x_swptr_free(VIRT_ADDR txDesc); ++BOOL ae531x_twisted_enet(void); ++ ++#endif /* _AE531XMAC_H_ */ +diff -urN linux-mips-orig/drivers/net/ath/ae531xreg.h linux-mips-new/drivers/net/ath/ae531xreg.h +--- linux-mips-orig/drivers/net/ath/ae531xreg.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-mips-new/drivers/net/ath/ae531xreg.h 2005-12-31 12:33:57.675538520 +0000 +@@ -0,0 +1,439 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved. ++ */ ++ ++/* ++ * See README to understand the decomposition of the ethernet driver. ++ * ++ * Register definitions for Atheros AR531X Ethernet MAC. ++ */ ++ ++#ifndef _AE531XREG_H_ ++#define _AE531XREG_H_ ++ ++#define AE531X_MAC_OFFSET 0x0000 ++#define AE531X_PHY_OFFSET 0x0000 /* Same as MAC offset */ ++#define AE531X_DMA_OFFSET 0x1000 ++ ++/***********************************************************/ ++/* MAC110 registers, base address is BAR+AE531X_MAC_OFFSET */ ++/***********************************************************/ ++#define MacControl 0x00 /* control */ ++#define MacAddrHigh 0x04 /* address high */ ++#define MacAddrLow 0x08 /* address low */ ++#define MacMultiHashHigh 0x0C /* multicast hash table high */ ++#define MacMultiHashLow 0x10 /* multicast hash table low */ ++#define MacMiiAddr 0x14 /* MII address */ ++#define MacMiiData 0x18 /* MII data */ ++#define MacFlowControl 0x1C /* Flow control */ ++#define MacVlan1Tag 0x4C /* VLAN1 tag */ ++#define MacVlan2Tag 0x50 /* VLAN2 tag */ ++ ++ ++/***************************************************************/ ++/* DMA engine registers, base address is BAR+AE531X_DMA_OFFSET */ ++/***************************************************************/ ++#define DmaBusMode 0x00 /* CSR0 - Bus Mode */ ++#define DmaTxPollDemand 0x04 /* CSR1 - Transmit Poll Demand */ ++#define DmaRxPollDemand 0x08 /* CSR2 - Receive Poll Demand */ ++#define DmaRxBaseAddr 0x0C /* CSR3 - Receive list base address */ ++#define DmaTxBaseAddr 0x10 /* CSR4 - Transmit list base address */ ++#define DmaStatus 0x14 /* CSR5 - Dma status */ ++#define DmaControl 0x18 /* CSR6 - Dma control */ ++#define DmaIntrEnb 0x1C /* CSR7 - Interrupt enable */ ++#define DmaOverflowCnt 0x20 /* CSR8 - Missed Frame and Buff Overflow counter */ ++#define DmaTxCurrAddr 0x50 /* CSR20 - Current host transmit buffer address */ ++#define DmaRxCurrAddr 0x54 /* CSR21 - Current host receive buffer address */ ++ ++/**********************************************************/ ++/* MAC Control register layout */ ++/**********************************************************/ ++#define MacFilterOff 0x80000000 /* Receive all incoming packets RW */ ++#define MacFilterOn 0 /* Receive filtered packets only 0 */ ++#define MacBigEndian 0x40000000 /* Big endian mode RW */ ++#define MacLittleEndian 0 /* Little endian 0 */ ++#define MacHeartBeatOff 0x10000000 /* Heartbeat signal qual disable RW*/ ++#define MacHeartBeatOn 0 /* Heartbeat signal qual enable 0 */ ++#define MacSelectSrl 0x08000000 /* Select SRL port RW */ ++#define MacSelectMii 0 /* Select MII port 0 */ ++#define MacDisableRxOwn 0x00800000 /* Disable receive own packets RW */ ++#define MacEnableRxOwn 0 /* Enable receive own packets 0 */ ++#define MacLoopbackExt 0x00400000 /* External loopback RW */ ++#define MacLoopbackInt 0x00200000 /* Internal loopback */ ++#define MacLoopbackOff 0 /* Normal mode 00 */ ++#define MacFullDuplex 0x00100000 /* Full duplex mode RW */ ++#define MacHalfDuplex 0 /* Half duplex mode 0 */ ++#define MacMulticastFilterOff 0x00080000 /* Pass all multicast packets RW */ ++#define MacMulticastFilterOn 0 /* Pass filtered mcast packets 0 */ ++#define MacPromiscuousModeOn 0x00040000 /* Receive all valid packets RW 1 */ ++#define MacPromiscuousModeOff 0 /* Receive filtered packets only */ ++#define MacFilterInverse 0x00020000 /* Inverse filtering RW */ ++#define MacFilterNormal 0 /* Normal filtering 0 */ ++#define MacBadFramesEnable 0x00010000 /* Pass bad frames RW */ ++#define MacBadFramesDisable 0 /* Do not pass bad frames 0 */ ++#define MacPerfectFilterOff 0x00008000 /* Hash filtering only RW */ ++#define MacPerfectFilterOn 0 /* Both perfect and hash filtering 0 */ ++#define MacHashFilterOn 0x00002000 /* perform hash filtering RW */ ++#define MacHashFilterOff 0 /* perfect filtering only 0 */ ++#define MacLateCollisionOn 0x00001000 /* Enable late collision control RW */ ++#define MacLateCollisionOff 0 /* Disable late collision control 0 */ ++#define MacBroadcastDisable 0x00000800 /* Disable reception of bcast frames RW */ ++#define MacBroadcastEnable 0 /* Enable broadcast frames 0 */ ++#define MacRetryDisable 0x00000400 /* Disable retransmission RW */ ++#define MacRetryEnable 0 /* Enable retransmission 0 */ ++#define MacPadStripEnable 0x00000100 /* Pad stripping enable RW */ ++#define MacPadStripDisable 0 /* Pad stripping disable 0 */ ++#define MacBackoff 0 /* Backoff Limit RW 00 */ ++#define MacDeferralCheckEnable 0x00000020 /* Deferral check enable RW */ ++#define MacDeferralCheckDisable 0 /* Deferral check disable 0 */ ++#define MacTxEnable 0x00000008 /* Transmitter enable RW */ ++#define MacTxDisable 0 /* Transmitter disable 0 */ ++#define MacRxEnable 0x00000004 /* Receiver enable RW */ ++#define MacRxDisable 0 /* Receiver disable 0 */ ++ ++ ++/**********************************************************/ ++/* MII address register layout */ ++/**********************************************************/ ++#define MiiDevMask 0x0000F800 /* MII device address */ ++#define MiiDevShift 11 ++#define MiiRegMask 0x000007C0 /* MII register */ ++#define MiiRegShift 6 ++#define MiiWrite 0x00000002 /* Write to register */ ++#define MiiRead 0 /* Read from register */ ++#define MiiBusy 0x00000001 /* MII interface is busy */ ++ ++/**********************************************************/ ++/* MII Data register layout */ ++/**********************************************************/ ++#define MiiDataMask 0x0000FFFF /* MII Data */ ++ ++/**********************************************************/ ++/* MAC flow control register layout */ ++/**********************************************************/ ++#define MacPauseTimeMask 0xFFFF0000 /* PAUSE TIME field in ctrl frame */ ++#define MacPauseTimeShift 15 ++#define MacControlFrameEnable 0x00000004 /* Enable pass ctrl frames to host */ ++#define MacControlFrameDisable 0 /* Do not pass ctrl frames to host */ ++#define MacFlowControlEnable 0x00000002 /* Enable flow control */ ++#define MacFlowControlDisable 0 /* Disable flow control */ ++#define MacSendPauseFrame 0x00000001 /* send pause frame */ ++ ++/**********************************************************/ ++/* DMA bus mode register layout */ ++/**********************************************************/ ++#define DmaRxAlign16 0x01000000 /* Force all rx buffers to align on odd hw bndry */ ++#define DmaBigEndianDes 0x00100000 /* Big endian data buffer descriptors RW */ ++#define DmaLittleEndianDesc 0 /* Little endian data descriptors */ ++#define DmaBurstLength32 0x00002000 /* Dma burst length 32 RW */ ++#define DmaBurstLength16 0x00001000 /* Dma burst length 16 */ ++#define DmaBurstLength8 0x00000800 /* Dma burst length 8 */ ++#define DmaBurstLength4 0x00000400 /* Dma burst length 4 */ ++#define DmaBurstLength2 0x00000200 /* Dma burst length 2 */ ++#define DmaBurstLength1 0x00000100 /* Dma burst length 1 */ ++#define DmaBurstLength0 0x00000000 /* Dma burst length 0 */ ++#define DmaBigEndianData 0x00000080 /* Big endian data buffers RW */ ++#define DmaLittleEndianData 0 /* Little endian data buffers 0 */ ++#define DmaDescriptorSkip16 0x00000040 /* number of dwords to skip RW */ ++#define DmaDescriptorSkip8 0x00000020 /* between two unchained descriptors */ ++#define DmaDescriptorSkip4 0x00000010 ++#define DmaDescriptorSkip2 0x00000008 ++#define DmaDescriptorSkip1 0x00000004 ++#define DmaDescriptorSkip0 0 ++#define DmaReceivePriorityOff 0x00000002 /* equal rx and tx priorities RW */ ++#define DmaReceivePriorityOn 0 /* Rx has prioryty over Tx 0 */ ++#define DmaResetOn 0x00000001 /* Reset DMA engine RW */ ++#define DmaResetOff 0 ++ ++/**********************************************************/ ++/* DMA Status register layout */ ++/**********************************************************/ ++#define DmaRxAbort 0x01000000 /* receiver bus abort R 0 */ ++#define DmaTxAbort 0x00800000 /* transmitter bus abort R 0 */ ++#define DmaTxState 0x00700000 /* Transmit process state R 000 */ ++#define DmaTxStopped 0x00000000 /* Stopped */ ++#define DmaTxFetching 0x00100000 /* Running - fetching the descriptor */ ++#define DmaTxWaiting 0x00200000 /* Running - waiting for end of transmission */ ++#define DmaTxReading 0x00300000 /* Running - reading the data from memory */ ++#define DmaTxSuspended 0x00600000 /* Suspended */ ++#define DmaTxClosing 0x00700000 /* Running - closing descriptor */ ++#define DmaRxState 0x000E0000 /* Receive process state 000 */ ++#define DmaRxStopped 0x00000000 /* Stopped */ ++#define DmaRxFetching 0x00020000 /* Running - fetching the descriptor */ ++#define DmaRxChecking 0x00040000 /* Running - checking for end of packet */ ++#define DmaRxWaiting 0x00060000 /* Running - waiting for packet */ ++#define DmaRxSuspended 0x00080000 /* Suspended */ ++#define DmaRxClosing 0x000A0000 /* Running - closing descriptor */ ++#define DmaRxFlushing 0x000C0000 /* Running - flushing the current frame */ ++#define DmaRxQueuing 0x000E0000 /* Running - queuing the recieve frame into host memory */ ++#define DmaIntNormal 0x00010000 /* Normal interrupt summary RW 0 */ ++#define DmaIntAbnormal 0x00008000 /* Abnormal interrupt summary RW 0 */ ++#define DmaIntEarlyRx 0x00004000 /* Early receive interrupt (Normal) RW 0 */ ++#define DmaIntBusError 0x00002000 /* Fatal bus error (Abnormal) RW 0 */ ++#define DmaIntEarlyTx 0x00000400 /* Early transmit interrupt RW 0 */ ++#define DmaIntRxStopped 0x00000100 /* Receive process stopped (Abnormal) RW 0 */ ++#define DmaIntRxNoBuffer 0x00000080 /* Receive buffer unavailable (Abnormal) RW 0*/ ++#define DmaIntRxCompleted 0x00000040 /* Completion of frame reception(Normal) RW 0*/ ++#define DmaIntTxUnderflow 0x00000020 /* Transmit underflow (Abnormal) RW 0 */ ++#define DmaIntTxJabber 0x00000008 /* Transmit Jabber Timeout (Abnormal) RW 0 */ ++#define DmaIntTxNoBuffer 0x00000004 /* Transmit buffer unavailable (Normal) RW 0*/ ++#define DmaIntTxStopped 0x00000002 /* Transmit process stopped (Abnormal) RW 0 */ ++#define DmaIntTxCompleted 0x00000001 /* Transmit completed (Normal) RW 0 */ ++ ++/**********************************************************/ ++/* DMA control register layout */ ++/**********************************************************/ ++#define DmaStoreAndForward 0x00000000 /* Store and forward RW 0 */ ++#define DmaTxThreshCtl256 0x0000c000 /* Non-SF threshold is 256 words */ ++#define DmaTxThreshCtl128 0x00008000 /* Non-SF threshold is 128 words */ ++#define DmaTxThreshCtl064 0x00004000 /* Non-SF threshold is 64 words */ ++#define DmaTxThreshCtl032 0x00000000 /* Non-SF threshold is 32 words */ ++#define DmaTxStart 0x00002000 /* Start/Stop transmission RW 0 */ ++#define DmaTxSecondFrame 0x00000004 /* Operate on second frame RW 0 */ ++#define DmaRxStart 0x00000002 /* Start/Stop reception RW 0 */ ++ ++/**********************************************************/ ++/* DMA interrupt enable register layout */ ++/**********************************************************/ ++#define DmaIeNormal DmaIntNormal /* Normal interrupt enable RW 0 */ ++#define DmaIeAbnormal DmaIntAbnormal /* Abnormal interrupt enable RW 0 */ ++#define DmaIeEarlyRx DmaIntEarlyRx /* Early receive interrupt enable RW 0 */ ++#define DmaIeBusError DmaIntBusError /* Fatal bus error enable RW 0 */ ++#define DmaIeEarlyTx DmaIntEarlyTx /* Early transmit interrupt enable RW 0 */ ++#define DmaIeRxStopped DmaIntRxStopped /* Receive process stopped enable RW 0 */ ++#define DmaIeRxNoBuffer DmaIntRxNoBuffer /* Receive buffer unavailable enable RW 0 */ ++#define DmaIeRxCompleted DmaIntRxCompleted /* Completion of frame reception enable RW 0 */ ++#define DmaIeTxUnderflow DmaIntTxUnderflow /* Transmit underflow enable RW 0 */ ++#define DmaIeTxJabber DmaIntTxJabber /* Transmit jabber timeout RW 0 */ ++#define DmaIeTxNoBuffer DmaIntTxNoBuffer /* Transmit buffer unavailable enable RW 0 */ ++#define DmaIeTxStopped DmaIntTxStopped /* Transmit process stopped enable RW 0 */ ++#define DmaIeTxCompleted DmaIntTxCompleted /* Transmit completed enable RW 0 */ ++ ++/****************************************************************/ ++/* DMA Missed Frame and Buffer Overflow Counter register layout */ ++/****************************************************************/ ++#define DmaRxBufferMissedFrame 0xffff0000 /* cleared on read */ ++#define DmaMissedFrameShift 16 ++#define DmaRxBufferOverflowCnt 0x0000ffff /* cleared on read */ ++#define DmaMissedFrameCountMask 0x0000ffff ++ ++/**********************************************************/ ++/* DMA Engine descriptor layout */ ++/**********************************************************/ ++/* status word of DMA descriptor */ ++#define DescOwnByDma 0x80000000 /* Descriptor is owned by DMA engine */ ++#define DescFrameLengthMask 0x3FFF0000 /* Receive descriptor frame length */ ++#define DescFrameLengthShift 16 ++#define DescError 0x00008000 /* Error summary bit OR of following bits */ ++#define DescRxTruncated 0x00004000 /* Rx - no more descs for receive frame */ ++#define DescRxLengthError 0x00001000 /* Rx - frame size not matching with length field */ ++#define DescRxRunt 0x00000800 /* Rx - runt frame, damaged by a ++ collision or term before 64 bytes */ ++#define DescRxMulticast 0x00000400 /* Rx - received frame is multicast */ ++#define DescRxFirst 0x00000200 /* Rx - first descriptor of the frame */ ++#define DescRxLast 0x00000100 /* Rx - last descriptor of the frame */ ++#define DescRxLongFrame 0x00000080 /* Rx - frame is longer than 1518 bytes */ ++#define DescRxLateColl 0x00000040 /* Rx - frame was damaged by a late collision */ ++#define DescRxFrameEther 0x00000020 /* Rx - Frame type Ethernet 802.3*/ ++#define DescRxMiiError 0x00000008 /* Rx - error reported by MII interface */ ++#define DescRxDribbling 0x00000004 /* Rx - frame contains noninteger multiple of 8 bits */ ++#define DescRxCrc 0x00000002 /* Rx - CRC error */ ++#define DescTxTimeout 0x00004000 /* Tx - Transmit jabber timeout */ ++#define DescTxLostCarrier 0x00000800 /* Tx - carrier lost during tramsmission */ ++#define DescTxNoCarrier 0x00000400 /* Tx - no carrier signal from tranceiver */ ++#define DescTxLateCollision 0x00000200 /* Tx - transmission aborted due to collision */ ++#define DescTxExcCollisions 0x00000100 /* Tx - transmission aborted after 16 collisions */ ++#define DescTxHeartbeatFail 0x00000080 /* Tx - heartbeat collision check failure */ ++#define DescTxCollMask 0x00000078 /* Tx - Collision count */ ++#define DescTxCollShift 3 ++#define DescTxExcDeferral 0x00000004 /* Tx - excessive deferral */ ++#define DescTxUnderflow 0x00000002 /* Tx - late data arrival from memory */ ++#define DescTxDeferred 0x00000001 /* Tx - frame transmision deferred */ ++ ++/* length word of DMA descriptor */ ++#define DescTxIntEnable 0x80000000 /* Tx - interrupt on completion */ ++#define DescTxLast 0x40000000 /* Tx - Last segment of the frame */ ++#define DescTxFirst 0x20000000 /* Tx - First segment of the frame */ ++#define DescTxDisableCrc 0x04000000 /* Tx - Add CRC disabled (first segment only) */ ++#define DescEndOfRing 0x02000000 /* End of descriptors ring */ ++#define DescChain 0x01000000 /* Second buffer address is chain address */ ++#define DescTxDisablePadd 0x00800000 /* disable padding */ ++#define DescSize2Mask 0x003FF800 /* Buffer 2 size */ ++#define DescSize2Shift 11 ++#define DescSize1Mask 0x000007FF /* Buffer 1 size */ ++#define DescSize1Shift 0 ++ ++/**********************************************************/ ++/* Initial register values */ ++/**********************************************************/ ++/* Full-duplex mode with perfect filter on */ ++#define MacControlInitFdx \ ++ ( MacFilterOn \ ++ | MacLittleEndian \ ++ | MacHeartBeatOn \ ++ | MacSelectMii \ ++ | MacEnableRxOwn \ ++ | MacLoopbackOff \ ++ | MacFullDuplex \ ++ | MacMulticastFilterOn \ ++ | MacPromiscuousModeOff \ ++ | MacFilterNormal \ ++ | MacBadFramesDisable \ ++ | MacPerfectFilterOn \ ++ | MacHashFilterOff \ ++ | MacLateCollisionOff \ ++ | MacBroadcastEnable \ ++ | MacRetryEnable \ ++ | MacPadStripDisable \ ++ | MacDeferralCheckDisable \ ++ | MacTxEnable \ ++ | MacRxEnable) ++ ++/* Full-duplex mode */ ++#define MacFlowControlInitFdx \ ++ ( MacControlFrameDisable \ ++ | MacFlowControlEnable) ++ ++/* Half-duplex mode with perfect filter on */ ++#define MacControlInitHdx \ ++ ( MacFilterOn \ ++ | MacLittleEndian \ ++ | MacHeartBeatOn \ ++ | MacSelectMii \ ++ | MacDisableRxOwn \ ++ | MacLoopbackOff \ ++ | MacHalfDuplex \ ++ | MacMulticastFilterOn \ ++ | MacPromiscuousModeOff \ ++ | MacFilterNormal \ ++ | MacBadFramesDisable \ ++ | MacPerfectFilterOn \ ++ | MacHashFilterOff \ ++ | MacLateCollisionOff \ ++ | MacBroadcastEnable \ ++ | MacRetryEnable \ ++ | MacPadStripDisable \ ++ | MacDeferralCheckDisable \ ++ | MacTxEnable \ ++ | MacRxEnable) ++ ++/* Half-duplex mode */ ++#define MacFlowControlInitHdx \ ++ ( MacControlFrameDisable \ ++ | MacFlowControlDisable) ++ ++/* Bus Mode Rx odd half word align */ ++#define DmaBusModeInit \ ++ ( DmaLittleEndianDesc \ ++ | DmaRxAlign16 \ ++ | DmaBurstLength32 \ ++ | DmaBigEndianData \ ++ | DmaDescriptorSkip1 \ ++ | DmaReceivePriorityOn \ ++ | DmaResetOff) ++ ++#define DmaControlInit (DmaStoreAndForward) ++ ++/* Interrupt groups */ ++#define DmaIntEnable \ ++ ( DmaIeNormal \ ++ | DmaIeAbnormal \ ++ | DmaIntBusError \ ++ | DmaIntRxStopped \ ++ | DmaIntRxNoBuffer \ ++ | DmaIntRxCompleted \ ++ | DmaIntTxUnderflow \ ++ | DmaIntTxStopped) ++ ++#define DmaIntDisable 0 ++ ++#define DmaAllIntCauseMask \ ++ ( DmaIeNormal \ ++ | DmaIeAbnormal \ ++ | DmaIntEarlyRx \ ++ | DmaIntBusError \ ++ | DmaIntEarlyTx \ ++ | DmaIntRxStopped \ ++ | DmaIntRxNoBuffer \ ++ | DmaIntRxCompleted \ ++ | DmaIntTxUnderflow \ ++ | DmaIntTxJabber \ ++ | DmaIntTxNoBuffer \ ++ | DmaIntTxStopped \ ++ | DmaIntTxCompleted) ++ ++#define UnhandledIntrMask \ ++ (DmaAllIntCauseMask \ ++ & ~(DmaIntRxNoBuffer \ ++ | DmaIntTxStopped \ ++ | DmaIntTxJabber \ ++ | DmaIntTxUnderflow \ ++ | DmaIntBusError \ ++ | DmaIntRxCompleted )) ++ ++#define DescRxErrors \ ++ (DescRxTruncated \ ++ | DescRxRunt \ ++ | DescRxLateColl \ ++ | DescRxMiiError \ ++ | DescRxCrc) ++ ++#define DescTxErrors \ ++ ( DescTxTimeout \ ++ | DescTxLateCollision \ ++ | DescTxExcCollisions \ ++ | DescTxExcDeferral \ ++ | DescTxUnderflow) ++ ++/**********************************************************/ ++/* Descriptor Layout */ ++/**********************************************************/ ++#define AE531X_DESC_STATUS 0x00 /* Status offset */ ++#define AE531X_DESC_CTRLEN 0x04 /* Control and Length offset */ ++#define AE531X_DESC_BUFPTR 0x08 /* Buffer pointer offset */ ++#define AE531X_DESC_LNKBUF 0x0c /* Link field offset, or ptr to 2nd buf */ ++#define AE531X_DESC_SWPTR 0x10 /* OS-Dependent software pointer */ ++ ++#define AE531X_DESC_SIZE 0x10 /* 4 words, 16 bytes */ ++#define AE531X_QUEUE_ELE_SIZE 0x14 /* with software pointer extension */ ++ ++/* Accessors to the dma descriptor fields */ ++#define AE531X_DESC_STATUS_GET(ptr) \ ++ *(volatile UINT32 *)((UINT32)(ptr) + AE531X_DESC_STATUS) ++ ++#define AE531X_DESC_STATUS_SET(ptr, val) \ ++ AE531X_DESC_STATUS_GET(ptr) = (val) ++ ++#define AE531X_DESC_CTRLEN_GET(ptr) \ ++ *(volatile UINT32 *)((UINT32)ptr + AE531X_DESC_CTRLEN) ++ ++#define AE531X_DESC_CTRLEN_SET(ptr, val) \ ++ AE531X_DESC_CTRLEN_GET(ptr) = (val) ++ ++#define AE531X_DESC_BUFPTR_GET(ptr) \ ++ *(volatile UINT32 *)((UINT32)ptr + AE531X_DESC_BUFPTR) ++ ++#define AE531X_DESC_BUFPTR_SET(ptr,val) \ ++ AE531X_DESC_BUFPTR_GET(ptr) = (UINT32)(val) ++ ++#define AE531X_DESC_LNKBUF_GET(ptr) \ ++ *(volatile UINT32 *)((UINT32)ptr + AE531X_DESC_LNKBUF) ++ ++#define AE531X_DESC_LNKBUF_SET(ptr, val) \ ++ AE531X_DESC_LNKBUF_GET(ptr) = (val) ++ ++#define AE531X_DESC_SWPTR_GET(ptr) \ ++ (void *)(*(volatile UINT32 *) ((UINT32)ptr + AE531X_DESC_SWPTR)) ++ ++#define AE531X_DESC_SWPTR_SET(ptr,val) \ ++ AE531X_DESC_SWPTR_GET(ptr) = (void *)(val) ++ ++/* Get size of Rx data from desc, in bytes */ ++#define AE531X_DESC_STATUS_RX_SIZE(x) \ ++ (((x) & DescFrameLengthMask) >> DescFrameLengthShift) ++ ++#endif /* _AE531XREG_H_ */ +diff -urN linux-mips-orig/drivers/net/ath/ar531x.h linux-mips-new/drivers/net/ath/ar531x.h +--- linux-mips-orig/drivers/net/ath/ar531x.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-mips-new/drivers/net/ath/ar531x.h 2005-12-31 12:33:57.676538368 +0000 +@@ -0,0 +1,1124 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved. ++ */ ++ ++#ifndef AR531X_H ++#define AR531X_H 1 ++ ++ ++#ifndef CONFIG_AR5315 ++ ++#include ++ ++/* Address Map */ ++#define AR531X_WLAN0 0x18000000 ++#define AR531X_WLAN1 0x18500000 ++#define AR531X_ENET0 0x18100000 ++#define AR531X_ENET1 0x18200000 ++#define AR531X_SDRAMCTL 0x18300000 ++#define AR531X_FLASHCTL 0x18400000 ++#define AR531X_APBBASE 0x1c000000 ++#define AR531X_FLASH 0x1e000000 ++ ++/* ++ * AR531X_NUM_ENET_MAC defines the number of ethernet MACs that ++ * should be considered available. The AR5312 supports 2 enet MACS, ++ * even though many reference boards only actually use 1 of them ++ * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch. ++ * The AR2312 supports 1 enet MAC. ++ */ ++#define AR531X_NUM_ENET_MAC 2 ++ ++/* ++ * Need these defines to determine true number of ethernet MACs ++ */ ++#define AR5212_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */ ++#define AR5212_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ ++#define AR5212_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */ ++#define AR531X_RADIO_MASK_OFF 0xc8 ++#define AR531X_RADIO0_MASK 0x0003 ++#define AR531X_RADIO1_MASK 0x000c ++#define AR531X_RADIO1_S 2 ++ ++/* ++ * AR531X_NUM_WMAC defines the number of Wireless MACs that\ ++ * should be considered available. ++ */ ++#define AR531X_NUM_WMAC 2 ++ ++/* Reset/Timer Block Address Map */ ++#define AR531X_RESETTMR (AR531X_APBBASE + 0x3000) ++#define AR531X_TIMER (AR531X_RESETTMR + 0x0000) /* countdown timer */ ++#define AR531X_WD_CTRL (AR531X_RESETTMR + 0x0008) /* watchdog cntrl */ ++#define AR531X_WD_TIMER (AR531X_RESETTMR + 0x000c) /* watchdog timer */ ++#define AR531X_ISR (AR531X_RESETTMR + 0x0010) /* Intr Status Reg */ ++#define AR531X_IMR (AR531X_RESETTMR + 0x0014) /* Intr Mask Reg */ ++#define AR531X_RESET (AR531X_RESETTMR + 0x0020) ++#define AR5312_CLOCKCTL1 (AR531X_RESETTMR + 0x0064) ++#define AR5312_SCRATCH (AR531X_RESETTMR + 0x006c) ++#define AR531X_PROCADDR (AR531X_RESETTMR + 0x0070) ++#define AR531X_PROC1 (AR531X_RESETTMR + 0x0074) ++#define AR531X_DMAADDR (AR531X_RESETTMR + 0x0078) ++#define AR531X_DMA1 (AR531X_RESETTMR + 0x007c) ++#define AR531X_ENABLE (AR531X_RESETTMR + 0x0080) /* interface enb */ ++#define AR531X_REV (AR531X_RESETTMR + 0x0090) /* revision */ ++ ++/* AR531X_WD_CTRL register bit field definitions */ ++#define AR531X_WD_CTRL_IGNORE_EXPIRATION 0x0000 ++#define AR531X_WD_CTRL_NMI 0x0001 ++#define AR531X_WD_CTRL_RESET 0x0002 ++ ++/* AR531X_ISR register bit field definitions */ ++#define AR531X_ISR_NONE 0x0000 ++#define AR531X_ISR_TIMER 0x0001 ++#define AR531X_ISR_AHBPROC 0x0002 ++#define AR531X_ISR_AHBDMA 0x0004 ++#define AR531X_ISR_GPIO 0x0008 ++#define AR531X_ISR_UART0 0x0010 ++#define AR531X_ISR_UART0DMA 0x0020 ++#define AR531X_ISR_WD 0x0040 ++#define AR531X_ISR_LOCAL 0x0080 ++ ++/* AR531X_RESET register bit field definitions */ ++#define AR531X_RESET_SYSTEM 0x00000001 /* cold reset full system */ ++#define AR531X_RESET_PROC 0x00000002 /* cold reset MIPS core */ ++#define AR531X_RESET_WLAN0 0x00000004 /* cold reset WLAN MAC and BB */ ++#define AR531X_RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */ ++#define AR531X_RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */ ++#define AR531X_RESET_ENET0 0x00000020 /* cold reset ENET0 mac */ ++#define AR531X_RESET_ENET1 0x00000040 /* cold reset ENET1 mac */ ++#define AR531X_RESET_UART0 0x00000100 /* cold reset UART0 (high speed) */ ++#define AR531X_RESET_WLAN1 0x00000200 /* cold reset WLAN MAC/BB */ ++#define AR531X_RESET_APB 0x00000400 /* cold reset APB (ar5312) */ ++#define AR531X_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */ ++#define AR531X_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset WLAN0 MAC */ ++#define AR531X_RESET_WARM_WLAN0_BB 0x00004000 /* warm reset WLAN0 BaseBand */ ++#define AR531X_RESET_NMI 0x00010000 /* send an NMI to the processor */ ++#define AR531X_RESET_WARM_WLAN1_MAC 0x00020000 /* warm reset WLAN1 mac */ ++#define AR531X_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 baseband */ ++#define AR531X_RESET_LOCAL_BUS 0x00080000 /* reset local bus */ ++#define AR531X_RESET_WDOG 0x00100000 /* last reset was a watchdog */ ++ ++#define AR531X_RESET_WMAC0_BITS \ ++ AR531X_RESET_WLAN0 |\ ++ AR531X_RESET_WARM_WLAN0_MAC |\ ++ AR531X_RESET_WARM_WLAN0_BB ++ ++#define AR531X_RESERT_WMAC1_BITS \ ++ AR531X_RESET_WLAN1 |\ ++ AR531X_RESET_WARM_WLAN1_MAC |\ ++ AR531X_RESET_WARM_WLAN1_BB ++ ++/* AR5312_CLOCKCTL1 register bit field definitions */ ++#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030 ++#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4 ++#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00 ++#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8 ++#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000 ++ ++/* Valid for AR5312 and AR2312 */ ++#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030 ++#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4 ++#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00 ++#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8 ++#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000 ++ ++/* Valid for AR2313 */ ++#define AR2313_CLOCKCTL1_PREDIVIDE_MASK 0x00003000 ++#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT 12 ++#define AR2313_CLOCKCTL1_MULTIPLIER_MASK 0x001f0000 ++#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT 16 ++#define AR2313_CLOCKCTL1_DOUBLER_MASK 0x00000000 ++ ++ ++/* AR531X_ENABLE register bit field definitions */ ++#define AR531X_ENABLE_WLAN0 0x0001 ++#define AR531X_ENABLE_ENET0 0x0002 ++#define AR531X_ENABLE_ENET1 0x0004 ++#define AR531X_ENABLE_UART_AND_WLAN1_PIO 0x0008 /* UART, and WLAN1 PIOs */ ++#define AR531X_ENABLE_WLAN1_DMA 0x0010 /* WLAN1 DMAs */ ++#define AR531X_ENABLE_WLAN1 \ ++ (AR531X_ENABLE_UART_AND_WLAN1_PIO | AR531X_ENABLE_WLAN1_DMA) ++ ++/* AR531X_REV register bit field definitions */ ++#define AR531X_REV_WMAC_MAJ 0xf000 ++#define AR531X_REV_WMAC_MAJ_S 12 ++#define AR531X_REV_WMAC_MIN 0x0f00 ++#define AR531X_REV_WMAC_MIN_S 8 ++#define AR531X_REV_MAJ 0x00f0 ++#define AR531X_REV_MAJ_S 4 ++#define AR531X_REV_MIN 0x000f ++#define AR531X_REV_MIN_S 0 ++#define AR531X_REV_CHIP (REV_MAJ|REV_MIN) ++ ++/* Major revision numbers, bits 7..4 of Revision ID register */ ++#define AR531X_REV_MAJ_AR5312 0x4 ++#define AR531X_REV_MAJ_AR2313 0x5 ++ ++/* Minor revision numbers, bits 3..0 of Revision ID register */ ++#define AR5312_REV_MIN_DUAL 0x0 /* Dual WLAN version */ ++#define AR5312_REV_MIN_SINGLE 0x1 /* Single WLAN version */ ++ ++/* AR531X_FLASHCTL register bit field definitions */ ++#define FLASHCTL_IDCY 0x0000000f /* Idle cycle turn around time */ ++#define FLASHCTL_IDCY_S 0 ++#define FLASHCTL_WST1 0x000003e0 /* Wait state 1 */ ++#define FLASHCTL_WST1_S 5 ++#define FLASHCTL_RBLE 0x00000400 /* Read byte lane enable */ ++#define FLASHCTL_WST2 0x0000f800 /* Wait state 2 */ ++#define FLASHCTL_WST2_S 11 ++#define FLASHCTL_AC 0x00070000 /* Flash address check (added) */ ++#define FLASHCTL_AC_S 16 ++#define FLASHCTL_AC_128K 0x00000000 ++#define FLASHCTL_AC_256K 0x00010000 ++#define FLASHCTL_AC_512K 0x00020000 ++#define FLASHCTL_AC_1M 0x00030000 ++#define FLASHCTL_AC_2M 0x00040000 ++#define FLASHCTL_AC_4M 0x00050000 ++#define FLASHCTL_AC_8M 0x00060000 ++#define FLASHCTL_AC_RES 0x00070000 /* 16MB is not supported */ ++#define FLASHCTL_E 0x00080000 /* Flash bank enable (added) */ ++#define FLASHCTL_BUSERR 0x01000000 /* Bus transfer error status flag */ ++#define FLASHCTL_WPERR 0x02000000 /* Write protect error status flag */ ++#define FLASHCTL_WP 0x04000000 /* Write protect */ ++#define FLASHCTL_BM 0x08000000 /* Burst mode */ ++#define FLASHCTL_MW 0x30000000 /* Memory width */ ++#define FLASHCTL_MWx8 0x00000000 /* Memory width x8 */ ++#define FLASHCTL_MWx16 0x10000000 /* Memory width x16 */ ++#define FLASHCTL_MWx32 0x20000000 /* Memory width x32 (not supported) */ ++#define FLASHCTL_ATNR 0x00000000 /* Access type == no retry */ ++#define FLASHCTL_ATR 0x80000000 /* Access type == retry every */ ++#define FLASHCTL_ATR4 0xc0000000 /* Access type == retry every 4 */ ++ ++/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices. */ ++#define AR531X_FLASHCTL0 (AR531X_FLASHCTL + 0x00) ++#define AR531X_FLASHCTL1 (AR531X_FLASHCTL + 0x04) ++#define AR531X_FLASHCTL2 (AR531X_FLASHCTL + 0x08) ++ ++/* ARM SDRAM Controller -- just enough to determine memory size */ ++#define AR531X_MEM_CFG1 (AR531X_SDRAMCTL + 0x04) ++#define MEM_CFG1_AC0 0x00000700 /* bank 0: SDRAM addr check (added) */ ++#define MEM_CFG1_AC0_S 8 ++#define MEM_CFG1_AC1 0x00007000 /* bank 1: SDRAM addr check (added) */ ++#define MEM_CFG1_AC1_S 12 ++ ++/* GPIO Address Map */ ++#define AR531X_GPIO (AR531X_APBBASE + 0x2000) ++#define AR531X_GPIO_DO (AR531X_GPIO + 0x00) /* output register */ ++#define AR531X_GPIO_DI (AR531X_GPIO + 0x04) /* intput register */ ++#define AR531X_GPIO_CR (AR531X_GPIO + 0x08) /* control register */ ++ ++/* GPIO Control Register bit field definitions */ ++#define GPIO_CR_M(x) (1 << (x)) /* mask for i/o */ ++#define GPIO_CR_O(x) (0 << (x)) /* mask for output */ ++#define GPIO_CR_I(x) (1 << (x)) /* mask for input */ ++#define GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt */ ++#define GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */ ++ ++ ++typedef unsigned int AR531X_REG; ++ ++#define sysRegRead(phys) \ ++ (*(volatile AR531X_REG *)PHYS_TO_K1(phys)) ++ ++#define sysRegWrite(phys, val) \ ++ ((*(volatile AR531X_REG *)PHYS_TO_K1(phys)) = (val)) ++ ++ ++/* ++ * This is board-specific data that is stored in a "fixed" location in flash. ++ * It is shared across operating systems, so it should not be changed lightly. ++ * The main reason we need it is in order to extract the ethernet MAC ++ * address(es). ++ */ ++struct ar531x_boarddata { ++ u32 magic; /* board data is valid */ ++#define AR531X_BD_MAGIC 0x35333131 /* "5311", for all 531x platforms */ ++ u16 cksum; /* checksum (starting with BD_REV 2) */ ++ u16 rev; /* revision of this struct */ ++#define BD_REV 4 ++ char boardName[64]; /* Name of board */ ++ u16 major; /* Board major number */ ++ u16 minor; /* Board minor number */ ++ u32 config; /* Board configuration */ ++#define BD_ENET0 0x00000001 /* ENET0 is stuffed */ ++#define BD_ENET1 0x00000002 /* ENET1 is stuffed */ ++#define BD_UART1 0x00000004 /* UART1 is stuffed */ ++#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */ ++#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */ ++#define BD_SYSLED 0x00000020 /* System LED stuffed */ ++#define BD_EXTUARTCLK 0x00000040 /* External UART clock */ ++#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */ ++#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */ ++#define BD_WLAN0 0x00000200 /* Enable WLAN0 */ ++#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ memCap for testing */ ++#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */ ++#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */ ++#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */ ++#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */ ++#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */ ++#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */ ++#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */ ++ u16 resetConfigGpio; /* Reset factory GPIO pin */ ++ u16 sysLedGpio; /* System LED GPIO pin */ ++ ++ u32 cpuFreq; /* CPU core frequency in Hz */ ++ u32 sysFreq; /* System frequency in Hz */ ++ u32 cntFreq; /* Calculated C0_COUNT frequency */ ++ ++ u8 wlan0Mac[6]; ++ u8 enet0Mac[6]; ++ u8 enet1Mac[6]; ++ ++ u16 pciId; /* Pseudo PCIID for common code */ ++ u16 memCap; /* cap bank1 in MB */ ++ ++ /* version 3 */ ++ u8 wlan1Mac[6]; /* (ar5212) */ ++}; ++ ++#else ++ ++/* ++ * Add support for Cobra ++ * ++ * AR531XPLUSreg.h Register definitions for Atheros AR5311 and AR5312 chipsets. ++ * - WLAN registers are listed in ++ * hal/ar5211/ar5211Reg.h ++ * hal/ar5212/ar5212Reg.h ++ * - Ethernet registers are listed in ar531xenet.h ++ * - Standard UART is 16550 compatible. ++ */ ++ ++ ++/* ++ * Address map ++ */ ++#define AR531XPLUS_SDRAM0 0x00000000 /* DRAM */ ++#define AR531XPLUS_SPI_READ 0x08000000 /* SPI FLASH */ ++#define AR531XPLUS_WLAN0 0xB0000000 /* Wireless MMR */ ++#define AR531XPLUS_PCI 0xB0100000 /* PCI MMR */ ++#define AR531XPLUS_SDRAMCTL 0xB0300000 /* SDRAM MMR */ ++#define AR531XPLUS_LOCAL 0xB0400000 /* LOCAL BUS MMR */ ++#define AR531XPLUS_ENET0 0xB0500000 /* ETHERNET MMR */ ++#define AR531XPLUS_DSLBASE 0xB1000000 /* RESET CONTROL MMR */ ++#define AR531XPLUS_UART0 0xB1100003 /* UART MMR */ ++#define AR531XPLUS_SPI 0xB1300000 /* SPI FLASH MMR */ ++#define AR531XPLUS_FLASHBT 0xBfc00000 /* ro boot alias to FLASH */ ++#define AR531XPLUS_RAM1 0x40000000 /* ram alias */ ++#define AR531XPLUS_PCIEXT 0x80000000 /* pci external */ ++#define AR531XPLUS_RAM2 0xc0000000 /* ram alias */ ++#define AR531XPLUS_RAM3 0xe0000000 /* ram alias */ ++ ++#define AR531X_ENET0 AR531XPLUS_ENET0 ++#define AR531X_ENET1 0 ++/* ++ * Reset Register ++ */ ++#define AR531XPLUS_COLD_RESET (AR531XPLUS_DSLBASE + 0x0000) ++ ++/* Cold Reset */ ++#define RESET_COLD_AHB 0x00000001 ++#define RESET_COLD_APB 0x00000002 ++#define RESET_COLD_CPU 0x00000004 ++#define RESET_COLD_CPUWARM 0x00000008 ++#define RESET_SYSTEM (RESET_COLD_CPU | RESET_COLD_APB | RESET_COLD_AHB) /* full system */ ++ ++/* Warm Reset */ ++ ++#define AR531XPLUS_RESET (AR531XPLUS_DSLBASE + 0x0004) ++#define AR531X_RESET AR531XPLUS_RESET ++ ++#define RESET_WARM_WLAN0_MAC 0x00000001 /* warm reset WLAN0 MAC */ ++#define RESET_WARM_WLAN0_BB 0x00000002 /* warm reset WLAN0 BaseBand */ ++#define RESET_MPEGTS_RSVD 0x00000004 /* warm reset MPEG-TS */ ++#define RESET_PCIDMA 0x00000008 /* warm reset PCI ahb/dma */ ++#define RESET_MEMCTL 0x00000010 /* warm reset memory controller */ ++#define RESET_LOCAL 0x00000020 /* warm reset local bus */ ++#define RESET_I2C_RSVD 0x00000040 /* warm reset I2C bus */ ++#define RESET_SPI 0x00000080 /* warm reset SPI interface */ ++#define RESET_UART0 0x00000100 /* warm reset UART0 */ ++#define RESET_IR_RSVD 0x00000200 /* warm reset IR interface */ ++#define RESET_EPHY0 0x00000400 /* cold reset ENET0 phy */ ++#define RESET_ENET0 0x00000800 /* cold reset ENET0 mac */ ++ ++#define AR531X_RESET_ENET0 RESET_ENET0 ++#define AR531X_RESET_EPHY0 RESET_EPHY0 ++#define AR531X_RESET_ENET1 0 ++#define AR531X_RESET_EPHY1 0 ++ ++/* ++ * AHB master arbitration control ++ */ ++#define AR531XPLUS_AHB_ARB_CTL (AR531XPLUS_DSLBASE + 0x0008) ++ ++#define ARB_CPU 0x00000001 /* CPU, default */ ++#define ARB_WLAN 0x00000002 /* WLAN */ ++#define ARB_MPEGTS_RSVD 0x00000004 /* MPEG-TS */ ++#define ARB_LOCAL 0x00000008 /* LOCAL */ ++#define ARB_PCI 0x00000010 /* PCI */ ++#define ARB_ETHERNET 0x00000020 /* Ethernet */ ++#define ARB_RETRY 0x00000100 /* retry policy, debug only */ ++ ++/* ++ * Config Register ++ */ ++#define AR531XPLUS_ENDIAN_CTL (AR531XPLUS_DSLBASE + 0x000c) ++ ++#define CONFIG_AHB 0x00000001 /* EC - AHB bridge endianess */ ++#define CONFIG_WLAN 0x00000002 /* WLAN byteswap */ ++#define CONFIG_MPEGTS_RSVD 0x00000004 /* MPEG-TS byteswap */ ++#define CONFIG_PCI 0x00000008 /* PCI byteswap */ ++#define CONFIG_MEMCTL 0x00000010 /* Memory controller endianess */ ++#define CONFIG_LOCAL 0x00000020 /* Local bus byteswap */ ++#define CONFIG_ETHERNET 0x00000040 /* Ethernet byteswap */ ++ ++#define CONFIG_MERGE 0x00000200 /* CPU write buffer merge */ ++#define CONFIG_CPU 0x00000400 /* CPU big endian */ ++#define CONFIG_PCIAHB 0x00000800 ++#define CONFIG_PCIAHB_BRIDGE 0x00001000 ++#define CONFIG_SPI 0x00008000 /* SPI byteswap */ ++#define CONFIG_CPU_DRAM 0x00010000 ++#define CONFIG_CPU_PCI 0x00020000 ++#define CONFIG_CPU_MMR 0x00040000 ++#define CONFIG_BIG 0x00000400 ++ ++ ++/* ++ * NMI control ++ */ ++#define AR531XPLUS_NMI_CTL (AR531XPLUS_DSLBASE + 0x0010) ++ ++#define NMI_EN 1 ++ ++/* ++ * Revision Register - Initial value is 0x3010 (WMAC 3.0, AR531X 1.0). ++ */ ++#define AR531XPLUS_SREV (AR531XPLUS_DSLBASE + 0x0014) ++ ++#define AR531X_REV AR531XPLUS_SREV ++ ++#define REV_MAJ 0x00f0 ++#define REV_MAJ_S 4 ++#define REV_MIN 0x000f ++#define REV_MIN_S 0 ++#define REV_CHIP (REV_MAJ|REV_MIN) ++ ++#define AR531X_REV_MAJ REV_MAJ ++#define AR531X_REV_MAJ_S REV_MAJ_S ++#define AR531X_REV_MIN REV_MIN ++#define AR531X_REV_MIN_S REV_MIN_S ++#define REV_CHIP (REV_MAJ|REV_MIN) ++/* ++ * Need these defines to determine true number of ethernet MACs ++ */ ++#define AR5212_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */ ++#define AR5212_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ ++#define AR5212_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */ ++#define AR531X_RADIO_MASK_OFF 0xc8 ++#define AR531X_RADIO0_MASK 0x0003 ++#define AR531X_RADIO1_MASK 0x000c ++#define AR531X_RADIO1_S 2 ++ ++/* Major revision numbers, bits 7..4 of Revision ID register */ ++#define AR531X_REV_MAJ_AR5312 0x4 ++#define AR531X_REV_MAJ_AR2313 0x5 ++ ++/* ++ * AR531X_NUM_ENET_MAC defines the number of ethernet MACs that ++ * should be considered available. The AR5312 supports 2 enet MACS, ++ * even though many reference boards only actually use 1 of them ++ * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch. ++ * The AR2312 supports 1 enet MAC. ++ */ ++#define AR531X_NUM_ENET_MAC 1 ++ ++/* ++ * Interface Enable ++ */ ++#define AR531XPLUS_IF_CTL (AR531XPLUS_DSLBASE + 0x0018) ++ ++#define IF_MASK 0x00000007 ++#define IF_DISABLED 0 ++#define IF_PCI 1 ++#define IF_TS_LOCAL 2 ++#define IF_ALL 3 /* only for emulation with separate pins */ ++#define IF_LOCAL_HOST 0x00000008 ++#define IF_PCI_HOST 0x00000010 ++#define IF_PCI_INTR 0x00000020 ++#define IF_PCI_CLK_MASK 0x00030000 ++#define IF_PCI_CLK_INPUT 0 ++#define IF_PCI_CLK_OUTPUT_LOW 1 ++#define IF_PCI_CLK_OUTPUT_CLK 2 ++#define IF_PCI_CLK_OUTPUT_HIGH 3 ++#define IF_PCI_CLK_SHIFT 16 ++ ++ ++/* Major revision numbers, bits 7..4 of Revision ID register */ ++#define REV_MAJ_AR5311 0x01 ++#define REV_MAJ_AR5312 0x04 ++#define REV_MAJ_AR5315 0x0B ++ ++/* ++ * APB Interrupt control ++ */ ++ ++#define AR531XPLUS_ISR (AR531XPLUS_DSLBASE + 0x0020) ++#define AR531XPLUS_IMR (AR531XPLUS_DSLBASE + 0x0024) ++#define AR531XPLUS_GISR (AR531XPLUS_DSLBASE + 0x0028) ++ ++#define ISR_UART0 0x0001 /* high speed UART */ ++#define ISR_I2C_RSVD 0x0002 /* I2C bus */ ++#define ISR_SPI 0x0004 /* SPI bus */ ++#define ISR_AHB 0x0008 /* AHB error */ ++#define ISR_APB 0x0010 /* APB error */ ++#define ISR_TIMER 0x0020 /* timer */ ++#define ISR_GPIO 0x0040 /* GPIO */ ++#define ISR_WD 0x0080 /* watchdog */ ++#define ISR_IR_RSVD 0x0100 /* IR */ ++ ++#define IMR_UART0 ISR_UART0 ++#define IMR_I2C_RSVD ISR_I2C_RSVD ++#define IMR_SPI ISR_SPI ++#define IMR_AHB ISR_AHB ++#define IMR_APB ISR_APB ++#define IMR_TIMER ISR_TIMER ++#define IMR_GPIO ISR_GPIO ++#define IMR_WD ISR_WD ++#define IMR_IR_RSVD ISR_IR_RSVD ++ ++#define GISR_MISC 0x0001 ++#define GISR_WLAN0 0x0002 ++#define GISR_MPEGTS_RSVD 0x0004 ++#define GISR_LOCALPCI 0x0008 ++#define GISR_WMACPOLL 0x0010 ++#define GISR_TIMER 0x0020 ++#define GISR_ETHERNET 0x0040 ++ ++/* ++ * Interrupt routing from IO to the processor IP bits ++ * Define our inter mask and level ++ */ ++#define AR531XPLUS_INTR_MISCIO SR_IBIT3 ++#define AR531XPLUS_INTR_WLAN0 SR_IBIT4 ++#define AR531XPLUS_INTR_ENET0 SR_IBIT5 ++#define AR531XPLUS_INTR_LOCALPCI SR_IBIT6 ++#define AR531XPLUS_INTR_WMACPOLL SR_IBIT7 ++#define AR531XPLUS_INTR_COMPARE SR_IBIT8 ++ ++/* ++ * Timers ++ */ ++#define AR531XPLUS_TIMER (AR531XPLUS_DSLBASE + 0x0030) ++#define AR531XPLUS_RELOAD (AR531XPLUS_DSLBASE + 0x0034) ++#define AR531XPLUS_WD (AR531XPLUS_DSLBASE + 0x0038) ++#define AR531XPLUS_WDC (AR531XPLUS_DSLBASE + 0x003c) ++ ++#define WDC_RESET 0x00000002 /* reset on watchdog */ ++#define WDC_NMI 0x00000001 /* NMI on watchdog */ ++#define WDC_IGNORE_EXPIRATION 0x00000000 ++ ++/* ++ * Interface Debug ++ */ ++#define AR531X_FLASHDBG (AR531X_RESETTMR + 0x0040) ++#define AR531X_MIIDBG (AR531X_RESETTMR + 0x0044) ++ ++ ++/* ++ * CPU Performance Counters ++ */ ++#define AR531XPLUS_PERFCNT0 (AR531XPLUS_DSLBASE + 0x0048) ++#define AR531XPLUS_PERFCNT1 (AR531XPLUS_DSLBASE + 0x004c) ++ ++#define PERF_DATAHIT 0x0001 /* Count Data Cache Hits */ ++#define PERF_DATAMISS 0x0002 /* Count Data Cache Misses */ ++#define PERF_INSTHIT 0x0004 /* Count Instruction Cache Hits */ ++#define PERF_INSTMISS 0x0008 /* Count Instruction Cache Misses */ ++#define PERF_ACTIVE 0x0010 /* Count Active Processor Cycles */ ++#define PERF_WBHIT 0x0020 /* Count CPU Write Buffer Hits */ ++#define PERF_WBMISS 0x0040 /* Count CPU Write Buffer Misses */ ++ ++#define PERF_EB_ARDY 0x0001 /* Count EB_ARdy signal */ ++#define PERF_EB_AVALID 0x0002 /* Count EB_AValid signal */ ++#define PERF_EB_WDRDY 0x0004 /* Count EB_WDRdy signal */ ++#define PERF_EB_RDVAL 0x0008 /* Count EB_RdVal signal */ ++#define PERF_VRADDR 0x0010 /* Count valid read address cycles */ ++#define PERF_VWADDR 0x0020 /* Count valid write address cycles */ ++#define PERF_VWDATA 0x0040 /* Count valid write data cycles */ ++ ++/* ++ * AHB Error Reporting. ++ */ ++#define AR531XPLUS_AHB_ERR0 (AR531XPLUS_DSLBASE + 0x0050) /* error */ ++#define AR531XPLUS_AHB_ERR1 (AR531XPLUS_DSLBASE + 0x0054) /* haddr */ ++#define AR531XPLUS_AHB_ERR2 (AR531XPLUS_DSLBASE + 0x0058) /* hwdata */ ++#define AR531XPLUS_AHB_ERR3 (AR531XPLUS_DSLBASE + 0x005c) /* hrdata */ ++#define AR531XPLUS_AHB_ERR4 (AR531XPLUS_DSLBASE + 0x0060) /* status */ ++ ++#define AHB_ERROR_DET 1 /* AHB Error has been detected, */ ++ /* write 1 to clear all bits in ERR0 */ ++#define AHB_ERROR_OVR 2 /* AHB Error overflow has been detected */ ++#define AHB_ERROR_WDT 4 /* AHB Error due to wdt instead of hresp */ ++ ++#define PROCERR_HMAST 0x0000000f ++#define PROCERR_HMAST_DFLT 0 ++#define PROCERR_HMAST_WMAC 1 ++#define PROCERR_HMAST_ENET 2 ++#define PROCERR_HMAST_PCIENDPT 3 ++#define PROCERR_HMAST_LOCAL 4 ++#define PROCERR_HMAST_CPU 5 ++#define PROCERR_HMAST_PCITGT 6 ++ ++#define PROCERR_HMAST_S 0 ++#define PROCERR_HWRITE 0x00000010 ++#define PROCERR_HSIZE 0x00000060 ++#define PROCERR_HSIZE_S 5 ++#define PROCERR_HTRANS 0x00000180 ++#define PROCERR_HTRANS_S 7 ++#define PROCERR_HBURST 0x00000e00 ++#define PROCERR_HBURST_S 9 ++ ++ ++ ++/* ++ * Clock Control ++ */ ++#define AR531XPLUS_PLLC_CTL (AR531XPLUS_DSLBASE + 0x0064) ++#define AR531XPLUS_PLLV_CTL (AR531XPLUS_DSLBASE + 0x0068) ++#define AR531XPLUS_CPUCLK (AR531XPLUS_DSLBASE + 0x006c) ++#define AR531XPLUS_AMBACLK (AR531XPLUS_DSLBASE + 0x0070) ++#define AR531XPLUS_SYNCCLK (AR531XPLUS_DSLBASE + 0x0074) ++#define AR531XPLUS_DSL_SLEEP_CTL (AR531XPLUS_DSLBASE + 0x0080) ++#define AR531XPLUS_DSL_SLEEP_DUR (AR531XPLUS_DSLBASE + 0x0084) ++ ++/* PLLc Control fields */ ++#define PLLC_REF_DIV_M 0x00000003 ++#define PLLC_REF_DIV_S 0 ++#define PLLC_FDBACK_DIV_M 0x0000007C ++#define PLLC_FDBACK_DIV_S 2 ++#define PLLC_ADD_FDBACK_DIV_M 0x00000080 ++#define PLLC_ADD_FDBACK_DIV_S 7 ++#define PLLC_CLKC_DIV_M 0x0001c000 ++#define PLLC_CLKC_DIV_S 14 ++#define PLLC_CLKM_DIV_M 0x00700000 ++#define PLLC_CLKM_DIV_S 20 ++ ++/* CPU CLK Control fields */ ++#define CPUCLK_CLK_SEL_M 0x00000003 ++#define CPUCLK_CLK_SEL_S 0 ++#define CPUCLK_CLK_DIV_M 0x0000000c ++#define CPUCLK_CLK_DIV_S 2 ++ ++/* AMBA CLK Control fields */ ++#define AMBACLK_CLK_SEL_M 0x00000003 ++#define AMBACLK_CLK_SEL_S 0 ++#define AMBACLK_CLK_DIV_M 0x0000000c ++#define AMBACLK_CLK_DIV_S 2 ++ ++#if defined(COBRA_EMUL) ++#define AR531XPLUS_AMBA_CLOCK_RATE 20000000 ++#define AR531XPLUS_CPU_CLOCK_RATE 40000000 ++#else ++#if defined(DEFAULT_PLL) ++#define AR531XPLUS_AMBA_CLOCK_RATE 40000000 ++#define AR531XPLUS_CPU_CLOCK_RATE 40000000 ++#else ++#define AR531XPLUS_AMBA_CLOCK_RATE 92000000 ++#define AR531XPLUS_CPU_CLOCK_RATE 184000000 ++#endif /* ! DEFAULT_PLL */ ++#endif /* ! COBRA_EMUL */ ++ ++#define AR531XPLUS_UART_CLOCK_RATE AR531XPLUS_AMBA_CLOCK_RATE ++#define AR531XPLUS_SDRAM_CLOCK_RATE AR531XPLUS_AMBA_CLOCK_RATE ++ ++/* ++ * The UART computes baud rate as: ++ * baud = clock / (16 * divisor) ++ * where divisor is specified as a High Byte (DLM) and a Low Byte (DLL). ++ */ ++#define DESIRED_BAUD_RATE 38400 ++ ++/* ++ * The WATCHDOG value is computed as ++ * 10 seconds * AR531X_WATCHDOG_CLOCK_RATE ++ */ ++#define DESIRED_WATCHDOG_SECONDS 10 ++#define AR531X_WATCHDOG_TIME \ ++ (DESIRED_WATCHDOG_SECONDS * AR531X_WATCHDOG_CLOCK_RATE) ++ ++ ++#define CLOCKCTL_UART0 0x0010 /* enable UART0 external clock */ ++ ++ ++ /* ++ * Applicable "PCICFG" bits for WLAN(s). Assoc status and LED mode. ++ */ ++#define AR531X_PCICFG (AR531X_RESETTMR + 0x00b0) ++#define ASSOC_STATUS_M 0x00000003 ++#define ASSOC_STATUS_NONE 0 ++#define ASSOC_STATUS_PENDING 1 ++#define ASSOC_STATUS_ASSOCIATED 2 ++#define LED_MODE_M 0x0000001c ++#define LED_BLINK_THRESHOLD_M 0x000000e0 ++#define LED_SLOW_BLINK_MODE 0x00000100 ++ ++/* ++ * GPIO ++ */ ++ ++#define AR531XPLUS_GPIO_DI (AR531XPLUS_DSLBASE + 0x0088) ++#define AR531XPLUS_GPIO_DO (AR531XPLUS_DSLBASE + 0x0090) ++#define AR531XPLUS_GPIO_CR (AR531XPLUS_DSLBASE + 0x0098) ++#define AR531XPLUS_GPIO_INT (AR531XPLUS_DSLBASE + 0x00a0) ++ ++#define GPIO_CR_M(x) (1 << (x)) /* mask for i/o */ ++#define GPIO_CR_O(x) (1 << (x)) /* output */ ++#define GPIO_CR_I(x) (0 << (x)) /* input */ ++ ++#define GPIO_INT(x,Y) ((x) << (8 * (Y))) /* interrupt enable */ ++#define GPIO_INT_M(Y) ((0x3F) << (8 * (Y))) /* mask for int */ ++#define GPIO_INT_LVL(x,Y) ((x) << (8 * (Y) + 6)) /* interrupt level */ ++#define GPIO_INT_LVL_M(Y) ((0x3) << (8 * (Y) + 6)) /* mask for int level */ ++ ++#define AR531XPLUS_RESET_GPIO 5 ++#define AR531XPLUS_NUM_GPIO 22 ++ ++ ++/* ++ * PCI Clock Control ++ */ ++ ++#define AR531XPLUS_PCICLK (AR531XPLUS_DSLBASE + 0x00a4) ++ ++#define PCICLK_INPUT_M 0x3 ++#define PCICLK_INPUT_S 0 ++ ++#define PCICLK_PLLC_CLKM 0 ++#define PCICLK_PLLC_CLKM1 1 ++#define PCICLK_PLLC_CLKC 2 ++#define PCICLK_REF_CLK 3 ++ ++#define PCICLK_DIV_M 0xc ++#define PCICLK_DIV_S 2 ++ ++#define PCICLK_IN_FREQ 0 ++#define PCICLK_IN_FREQ_DIV_6 1 ++#define PCICLK_IN_FREQ_DIV_8 2 ++#define PCICLK_IN_FREQ_DIV_10 3 ++ ++/* ++ * Observation Control Register ++ */ ++#define AR531XPLUS_OCR (AR531XPLUS_DSLBASE + 0x00b0) ++#define OCR_GPIO0_IRIN 0x0040 ++#define OCR_GPIO1_IROUT 0x0080 ++#define OCR_GPIO3_RXCLR 0x0200 ++ ++/* ++ * General Clock Control ++ */ ++ ++#define AR531XPLUS_MISCCLK (AR531XPLUS_DSLBASE + 0x00b4) ++#define MISCCLK_PLLBYPASS_EN 0x00000001 ++#define MISCCLK_PROCREFCLK 0x00000002 ++ ++/* ++ * SDRAM Controller ++ * - No read or write buffers are included. ++ */ ++#define AR531XPLUS_MEM_CFG (AR531XPLUS_SDRAMCTL + 0x00) ++#define AR531XPLUS_MEM_CTRL (AR531XPLUS_SDRAMCTL + 0x0c) ++#define AR531XPLUS_MEM_REF (AR531XPLUS_SDRAMCTL + 0x10) ++ ++#define SDRAM_DATA_WIDTH_M 0x00006000 ++#define SDRAM_DATA_WIDTH_S 13 ++ ++#define SDRAM_COL_WIDTH_M 0x00001E00 ++#define SDRAM_COL_WIDTH_S 9 ++ ++#define SDRAM_ROW_WIDTH_M 0x000001E0 ++#define SDRAM_ROW_WIDTH_S 5 ++ ++#define SDRAM_BANKADDR_BITS_M 0x00000018 ++#define SDRAM_BANKADDR_BITS_S 3 ++ ++ ++/* ++ * SDRAM Memory Refresh (MEM_REF) value is computed as: ++ * MEMCTL_SREFR = (Tr * hclk_freq) / R ++ * where Tr is max. time of refresh of any single row ++ * R is number of rows in the DRAM ++ * For most 133MHz SDRAM parts, Tr=64ms, R=4096 or 8192 ++ */ ++#if defined(COBRA_EMUL) ++#define AR531XPLUS_SDRAM_MEMORY_REFRESH_VALUE 0x96 ++#else ++#if defined(DEFAULT_PLL) ++#define AR531XPLUS_SDRAM_MEMORY_REFRESH_VALUE 0x200 ++#else ++#define AR531XPLUS_SDRAM_MEMORY_REFRESH_VALUE 0x61a ++#endif /* ! DEFAULT_PLL */ ++#endif ++ ++#if defined(AR531XPLUS) ++ ++#define AR531XPLUS_SDRAM_DDR_SDRAM 0 /* Not DDR SDRAM */ ++#define AR531XPLUS_SDRAM_DATA_WIDTH 16 /* bits */ ++#define AR531XPLUS_SDRAM_COL_WIDTH 8 ++#define AR531XPLUS_SDRAM_ROW_WIDTH 12 ++ ++#else ++ ++#define AR531XPLUS_SDRAM_DDR_SDRAM 0 /* Not DDR SDRAM */ ++#define AR531XPLUS_SDRAM_DATA_WIDTH 16 ++#define AR531XPLUS_SDRAM_COL_WIDTH 8 ++#define AR531XPLUS_SDRAM_ROW_WIDTH 12 ++ ++#endif /* ! AR531XPLUS */ ++ ++/* ++ * SPI Flash Interface Registers ++ */ ++ ++#define AR531XPLUS_SPI_CTL (AR531XPLUS_SPI + 0x00) ++#define AR531XPLUS_SPI_OPCODE (AR531XPLUS_SPI + 0x04) ++#define AR531XPLUS_SPI_DATA (AR531XPLUS_SPI + 0x08) ++ ++#define SPI_CTL_START 0x00000100 ++#define SPI_CTL_BUSY 0x00010000 ++#define SPI_CTL_TXCNT_MASK 0x0000000f ++#define SPI_CTL_RXCNT_MASK 0x000000f0 ++#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff ++#define SPI_CTL_SIZE_MASK 0x00060000 ++ ++#define SPI_CTL_CLK_SEL_MASK 0x03000000 ++#define SPI_OPCODE_MASK 0x000000ff ++ ++/* ++ * PCI-MAC Configuration registers ++ */ ++#define PCI_MAC_RC (AR531XPLUS_PCI + 0x4000) ++#define PCI_MAC_SCR (AR531XPLUS_PCI + 0x4004) ++#define PCI_MAC_INTPEND (AR531XPLUS_PCI + 0x4008) ++#define PCI_MAC_SFR (AR531XPLUS_PCI + 0x400C) ++#define PCI_MAC_PCICFG (AR531XPLUS_PCI + 0x4010) ++#define PCI_MAC_SREV (AR531XPLUS_PCI + 0x4020) ++ ++#define PCI_MAC_RC_MAC 0x00000001 ++#define PCI_MAC_RC_BB 0x00000002 ++ ++#define PCI_MAC_SCR_SLMODE_M 0x00030000 ++#define PCI_MAC_SCR_SLMODE_S 16 ++#define PCI_MAC_SCR_SLM_FWAKE 0 ++#define PCI_MAC_SCR_SLM_FSLEEP 1 ++#define PCI_MAC_SCR_SLM_NORMAL 2 ++ ++#define PCI_MAC_SFR_SLEEP 0x00000001 ++ ++#define PCI_MAC_PCICFG_SPWR_DN 0x00010000 ++ ++ ++ ++ ++/* ++ * PCI Bus Interface Registers ++ */ ++#define AR531XPLUS_PCI_1MS_REG (AR531XPLUS_PCI + 0x0008) ++#define AR531XPLUS_PCI_1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */ ++ ++#define AR531XPLUS_PCI_MISC_CONFIG (AR531XPLUS_PCI + 0x000c) ++#define AR531XPLUS_PCIMISC_TXD_EN 0x00000001 /* Enable TXD for fragments */ ++#define AR531XPLUS_PCIMISC_CFG_SEL 0x00000002 /* mem or config cycles */ ++#define AR531XPLUS_PCIMISC_GIG_MASK 0x0000000C /* bits 31-30 for pci req */ ++#define AR531XPLUS_PCIMISC_RST_MODE 0x00000030 ++#define AR531XPLUS_PCIRST_INPUT 0x00000000 /* 4:5=0 rst is input */ ++#define AR531XPLUS_PCIRST_LOW 0x00000010 /* 4:5=1 rst to GND */ ++#define AR531XPLUS_PCIRST_HIGH 0x00000020 /* 4:5=2 rst to VDD */ ++#define AR531XPLUS_PCIGRANT_EN 0x00000000 /* 6:7=0 early grant en */ ++#define AR531XPLUS_PCIGRANT_FRAME 0x00000040 /* 6:7=1 grant waits 4 frame */ ++#define AR531XPLUS_PCIGRANT_IDLE 0x00000080 /* 6:7=2 grant waits 4 idle */ ++#define AR531XPLUS_PCIGRANT_GAP 0x00000000 /* 6:7=2 grant waits 4 idle */ ++#define AR531XPLUS_PCICACHE_DIS 0x00001000 /* PCI external access cache disable */ ++ ++#define AR531XPLUS_PCI_OUT_TSTAMP (AR531XPLUS_PCI + 0x0010) ++ ++#define AR531XPLUS_PCI_UNCACHE_CFG (AR531XPLUS_PCI + 0x0014) ++ ++#define AR531XPLUS_PCI_IN_EN (AR531XPLUS_PCI + 0x0100) ++#define AR531XPLUS_PCI_IN_EN0 0x01 /* Enable chain 0 */ ++#define AR531XPLUS_PCI_IN_EN1 0x02 /* Enable chain 1 */ ++#define AR531XPLUS_PCI_IN_EN2 0x04 /* Enable chain 2 */ ++#define AR531XPLUS_PCI_IN_EN3 0x08 /* Enable chain 3 */ ++ ++#define AR531XPLUS_PCI_IN_DIS (AR531XPLUS_PCI + 0x0104) ++#define AR531XPLUS_PCI_IN_DIS0 0x01 /* Disable chain 0 */ ++#define AR531XPLUS_PCI_IN_DIS1 0x02 /* Disable chain 1 */ ++#define AR531XPLUS_PCI_IN_DIS2 0x04 /* Disable chain 2 */ ++#define AR531XPLUS_PCI_IN_DIS3 0x08 /* Disable chain 3 */ ++ ++#define AR531XPLUS_PCI_IN_PTR (AR531XPLUS_PCI + 0x0200) ++ ++#define AR531XPLUS_PCI_OUT_EN (AR531XPLUS_PCI + 0x0400) ++#define AR531XPLUS_PCI_OUT_EN0 0x01 /* Enable chain 0 */ ++ ++#define AR531XPLUS_PCI_OUT_DIS (AR531XPLUS_PCI + 0x0404) ++#define AR531XPLUS_PCI_OUT_DIS0 0x01 /* Disable chain 0 */ ++ ++#define AR531XPLUS_PCI_OUT_PTR (AR531XPLUS_PCI + 0x0408) ++ ++#define AR531XPLUS_PCI_INT_STATUS (AR531XPLUS_PCI + 0x0500) /* write one to clr */ ++#define AR531XPLUS_PCI_TXINT 0x00000001 /* Desc In Completed */ ++#define AR531XPLUS_PCI_TXOK 0x00000002 /* Desc In OK */ ++#define AR531XPLUS_PCI_TXERR 0x00000004 /* Desc In ERR */ ++#define AR531XPLUS_PCI_TXEOL 0x00000008 /* Desc In End-of-List */ ++#define AR531XPLUS_PCI_RXINT 0x00000010 /* Desc Out Completed */ ++#define AR531XPLUS_PCI_RXOK 0x00000020 /* Desc Out OK */ ++#define AR531XPLUS_PCI_RXERR 0x00000040 /* Desc Out ERR */ ++#define AR531XPLUS_PCI_RXEOL 0x00000080 /* Desc Out EOL */ ++#define AR531XPLUS_PCI_TXOOD 0x00000200 /* Desc In Out-of-Desc */ ++#define AR531XPLUS_PCI_MASK 0x0000FFFF /* Desc Mask */ ++#define AR531XPLUS_PCI_EXT_INT 0x02000000 ++#define AR531XPLUS_PCI_ABORT_INT 0x04000000 ++ ++#define AR531XPLUS_PCI_INT_MASK (AR531XPLUS_PCI + 0x0504) /* same as INT_STATUS */ ++ ++#define AR531XPLUS_PCI_INTEN_REG (AR531XPLUS_PCI + 0x0508) ++#define AR531XPLUS_PCI_INT_DISABLE 0x00 /* disable pci interrupts */ ++#define AR531XPLUS_PCI_INT_ENABLE 0x01 /* enable pci interrupts */ ++ ++#define AR531XPLUS_PCI_HOST_IN_EN (AR531XPLUS_PCI + 0x0800) ++#define AR531XPLUS_PCI_HOST_IN_DIS (AR531XPLUS_PCI + 0x0804) ++#define AR531XPLUS_PCI_HOST_IN_PTR (AR531XPLUS_PCI + 0x0810) ++#define AR531XPLUS_PCI_HOST_OUT_EN (AR531XPLUS_PCI + 0x0900) ++#define AR531XPLUS_PCI_HOST_OUT_DIS (AR531XPLUS_PCI + 0x0904) ++#define AR531XPLUS_PCI_HOST_OUT_PTR (AR531XPLUS_PCI + 0x0908) ++ ++ ++/* ++ * Local Bus Interface Registers ++ */ ++#define AR531XPLUS_LB_CONFIG (AR531XPLUS_LOCAL + 0x0000) ++#define AR531XPLUS_LBCONF_OE 0x00000001 /* =1 OE is low-true */ ++#define AR531XPLUS_LBCONF_CS0 0x00000002 /* =1 first CS is low-true */ ++#define AR531XPLUS_LBCONF_CS1 0x00000004 /* =1 2nd CS is low-true */ ++#define AR531XPLUS_LBCONF_RDY 0x00000008 /* =1 RDY is low-true */ ++#define AR531XPLUS_LBCONF_WE 0x00000010 /* =1 Write En is low-true */ ++#define AR531XPLUS_LBCONF_WAIT 0x00000020 /* =1 WAIT is low-true */ ++#define AR531XPLUS_LBCONF_ADS 0x00000040 /* =1 Adr Strobe is low-true */ ++#define AR531XPLUS_LBCONF_MOT 0x00000080 /* =0 Intel, =1 Motorola */ ++#define AR531XPLUS_LBCONF_8CS 0x00000100 /* =1 8 bits CS, 0= 16bits */ ++#define AR531XPLUS_LBCONF_8DS 0x00000200 /* =1 8 bits Data S, 0=16bits */ ++#define AR531XPLUS_LBCONF_ADS_EN 0x00000400 /* =1 Enable ADS */ ++#define AR531XPLUS_LBCONF_ADR_OE 0x00000800 /* =1 Adr cap on OE, WE or DS */ ++#define AR531XPLUS_LBCONF_ADDT_MUX 0x00001000 /* =1 Adr and Data share bus */ ++#define AR531XPLUS_LBCONF_DATA_OE 0x00002000 /* =1 Data cap on OE, WE, DS */ ++#define AR531XPLUS_LBCONF_16DATA 0x00004000 /* =1 Data is 16 bits wide */ ++#define AR531XPLUS_LBCONF_SWAPDT 0x00008000 /* =1 Byte swap data */ ++#define AR531XPLUS_LBCONF_SYNC 0x00010000 /* =1 Bus synchronous to clk */ ++#define AR531XPLUS_LBCONF_INT 0x00020000 /* =1 Intr is low true */ ++#define AR531XPLUS_LBCONF_INT_CTR0 0x00000000 /* GND high-Z, Vdd is high-Z */ ++#define AR531XPLUS_LBCONF_INT_CTR1 0x00040000 /* GND drive, Vdd is high-Z */ ++#define AR531XPLUS_LBCONF_INT_CTR2 0x00080000 /* GND high-Z, Vdd drive */ ++#define AR531XPLUS_LBCONF_INT_CTR3 0x000C0000 /* GND drive, Vdd drive */ ++#define AR531XPLUS_LBCONF_RDY_WAIT 0x00100000 /* =1 RDY is negative of WAIT */ ++#define AR531XPLUS_LBCONF_INT_PULSE 0x00200000 /* =1 Interrupt is a pulse */ ++#define AR531XPLUS_LBCONF_ENABLE 0x00400000 /* =1 Falcon respond to LB */ ++ ++#define AR531XPLUS_LB_CLKSEL (AR531XPLUS_LOCAL + 0x0004) ++#define AR531XPLUS_LBCLK_EXT 0x0001 /* use external clk for lb */ ++ ++#define AR531XPLUS_LB_1MS (AR531XPLUS_LOCAL + 0x0008) ++#define AR531XPLUS_LB1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */ ++ ++#define AR531XPLUS_LB_MISCCFG (AR531XPLUS_LOCAL + 0x000C) ++#define AR531XPLUS_LBM_TXD_EN 0x00000001 /* Enable TXD for fragments */ ++#define AR531XPLUS_LBM_RX_INTEN 0x00000002 /* Enable LB ints on RX ready */ ++#define AR531XPLUS_LBM_MBOXWR_INTEN 0x00000004 /* Enable LB ints on mbox wr */ ++#define AR531XPLUS_LBM_MBOXRD_INTEN 0x00000008 /* Enable LB ints on mbox rd */ ++#define AR531XPLUS_LMB_DESCSWAP_EN 0x00000010 /* Byte swap desc enable */ ++#define AR531XPLUS_LBM_TIMEOUT_MASK 0x00FFFF80 ++#define AR531XPLUS_LBM_TIMEOUT_SHFT 7 ++#define AR531XPLUS_LBM_PORTMUX 0x07000000 ++ ++ ++#define AR531XPLUS_LB_RXTSOFF (AR531XPLUS_LOCAL + 0x0010) ++ ++#define AR531XPLUS_LB_TX_CHAIN_EN (AR531XPLUS_LOCAL + 0x0100) ++#define AR531XPLUS_LB_TXEN_0 0x01 ++#define AR531XPLUS_LB_TXEN_1 0x02 ++#define AR531XPLUS_LB_TXEN_2 0x04 ++#define AR531XPLUS_LB_TXEN_3 0x08 ++ ++#define AR531XPLUS_LB_TX_CHAIN_DIS (AR531XPLUS_LOCAL + 0x0104) ++#define AR531XPLUS_LB_TX_DESC_PTR (AR531XPLUS_LOCAL + 0x0200) ++ ++#define AR531XPLUS_LB_RX_CHAIN_EN (AR531XPLUS_LOCAL + 0x0400) ++#define AR531XPLUS_LB_RXEN 0x01 ++ ++#define AR531XPLUS_LB_RX_CHAIN_DIS (AR531XPLUS_LOCAL + 0x0404) ++#define AR531XPLUS_LB_RX_DESC_PTR (AR531XPLUS_LOCAL + 0x0408) ++ ++#define AR531XPLUS_LB_INT_STATUS (AR531XPLUS_LOCAL + 0x0500) ++#define AR531XPLUS_INT_TX_DESC 0x0001 ++#define AR531XPLUS_INT_TX_OK 0x0002 ++#define AR531XPLUS_INT_TX_ERR 0x0004 ++#define AR531XPLUS_INT_TX_EOF 0x0008 ++#define AR531XPLUS_INT_RX_DESC 0x0010 ++#define AR531XPLUS_INT_RX_OK 0x0020 ++#define AR531XPLUS_INT_RX_ERR 0x0040 ++#define AR531XPLUS_INT_RX_EOF 0x0080 ++#define AR531XPLUS_INT_TX_TRUNC 0x0100 ++#define AR531XPLUS_INT_TX_STARVE 0x0200 ++#define AR531XPLUS_INT_LB_TIMEOUT 0x0400 ++#define AR531XPLUS_INT_LB_ERR 0x0800 ++#define AR531XPLUS_INT_MBOX_WR 0x1000 ++#define AR531XPLUS_INT_MBOX_RD 0x2000 ++ ++/* Bit definitions for INT MASK are the same as INT_STATUS */ ++#define AR531XPLUS_LB_INT_MASK (AR531XPLUS_LOCAL + 0x0504) ++ ++#define AR531XPLUS_LB_INT_EN (AR531XPLUS_LOCAL + 0x0508) ++#define AR531XPLUS_LB_MBOX (AR531XPLUS_LOCAL + 0x0600) ++ ++ ++ ++/* ++ * IR Interface Registers ++ */ ++#define AR531XPLUS_IR_PKTDATA (AR531XPLUS_IR + 0x0000) ++ ++#define AR531XPLUS_IR_PKTLEN (AR531XPLUS_IR + 0x07fc) /* 0 - 63 */ ++ ++#define AR531XPLUS_IR_CONTROL (AR531XPLUS_IR + 0x0800) ++#define AR531XPLUS_IRCTL_TX 0x00000000 /* use as tranmitter */ ++#define AR531XPLUS_IRCTL_RX 0x00000001 /* use as receiver */ ++#define AR531XPLUS_IRCTL_SAMPLECLK_MASK 0x00003ffe /* Sample clk divisor mask */ ++#define AR531XPLUS_IRCTL_SAMPLECLK_SHFT 1 ++#define AR531XPLUS_IRCTL_OUTPUTCLK_MASK 0x03ffc000 /* Output clk divisor mask */ ++#define AR531XPLUS_IRCTL_OUTPUTCLK_SHFT 14 ++ ++#define AR531XPLUS_IR_STATUS (AR531XPLUS_IR + 0x0804) ++#define AR531XPLUS_IRSTS_RX 0x00000001 /* receive in progress */ ++#define AR531XPLUS_IRSTS_TX 0x00000002 /* transmit in progress */ ++ ++#define AR531XPLUS_IR_CONFIG (AR531XPLUS_IR + 0x0808) ++#define AR531XPLUS_IRCFG_INVIN 0x00000001 /* invert input polarity */ ++#define AR531XPLUS_IRCFG_INVOUT 0x00000002 /* invert output polarity */ ++#define AR531XPLUS_IRCFG_SEQ_START_WIN_SEL 0x00000004 /* 1 => 28, 0 => 7 */ ++#define AR531XPLUS_IRCFG_SEQ_START_THRESH 0x000000f0 /* */ ++#define AR531XPLUS_IRCFG_SEQ_END_UNIT_SEL 0x00000100 /* */ ++#define AR531XPLUS_IRCFG_SEQ_END_UNIT_THRESH 0x00007e00 /* */ ++#define AR531XPLUS_IRCFG_SEQ_END_WIN_SEL 0x00008000 /* */ ++#define AR531XPLUS_IRCFG_SEQ_END_WIN_THRESH 0x001f0000 /* */ ++#define AR531XPLUS_IRCFG_NUM_BACKOFF_WORDS 0x01e00000 /* */ ++ ++/* ++ * PCI memory constants: Memory area 1 and 2 are the same size - ++ * (twice the PCI_TLB_PAGE_SIZE). The definition of ++ * CPU_TO_PCI_MEM_SIZE is coupled with the TLB setup routine ++ * sysLib.c/sysTlbInit(), in that it assumes that 2 pages of size ++ * PCI_TLB_PAGE_SIZE are set up in the TLB for each PCI memory space. ++ */ ++ ++#define CPU_TO_PCI_MEM_BASE1 0xE0000000 ++#define CPU_TO_PCI_MEM_SIZE1 (2*PCI_TLB_PAGE_SIZE) ++ ++ ++/* TLB attributes for PCI transactions */ ++ ++#define PCI_MMU_PAGEMASK 0x00003FFF ++#define MMU_PAGE_UNCACHED 0x00000010 ++#define MMU_PAGE_DIRTY 0x00000004 ++#define MMU_PAGE_VALID 0x00000002 ++#define MMU_PAGE_GLOBAL 0x00000001 ++#define PCI_MMU_PAGEATTRIB (MMU_PAGE_UNCACHED|MMU_PAGE_DIRTY|\ ++ MMU_PAGE_VALID|MMU_PAGE_GLOBAL) ++#define PCI_MEMORY_SPACE1_VIRT 0xE0000000 /* Used for non-prefet mem */ ++#define PCI_MEMORY_SPACE1_PHYS 0x80000000 ++#define PCI_TLB_PAGE_SIZE 0x01000000 ++#define TLB_HI_MASK 0xFFFFE000 ++#define TLB_LO_MASK 0x3FFFFFFF ++#define PAGEMASK_SHIFT 11 ++#define TLB_LO_SHIFT 6 ++ ++#define PCI_MAX_LATENCY 0xFFF /* Max PCI latency */ ++ ++#define HOST_PCI_DEV_ID 3 ++#define HOST_PCI_MBAR0 0x10000000 ++#define HOST_PCI_MBAR1 0x20000000 ++#define HOST_PCI_MBAR2 0x30000000 ++ ++#define HOST_PCI_SDRAM_BASEADDR HOST_PCI_MBAR1 ++#define PCI_DEVICE_MEM_SPACE 0x800000 ++ ++ ++typedef unsigned int AR531X_REG; ++ ++#define sysRegRead(phys) \ ++ (*(volatile AR531X_REG *)PHYS_TO_K1(phys)) ++ ++#define sysRegWrite(phys, val) \ ++ ((*(volatile AR531X_REG *)PHYS_TO_K1(phys)) = (val)) ++ ++ ++ ++/* ++ * This is board-specific data that is stored in a "fixed" location in flash. ++ * It is shared across operating systems, so it should not be changed lightly. ++ * The main reason we need it is in order to extract the ethernet MAC ++ * address(es). ++ */ ++struct ar531x_boarddata { ++ u32 magic; /* board data is valid */ ++#define AR531X_BD_MAGIC 0x35333131 /* "5311", for all 531x platforms */ ++ u16 cksum; /* checksum (starting with BD_REV 2) */ ++ u16 rev; /* revision of this struct */ ++#define BD_REV 4 ++ char boardName[64]; /* Name of board */ ++ u16 major; /* Board major number */ ++ u16 minor; /* Board minor number */ ++ u32 config; /* Board configuration */ ++#define BD_ENET0 0x00000001 /* ENET0 is stuffed */ ++#define BD_ENET1 0x00000002 /* ENET1 is stuffed */ ++#define BD_UART1 0x00000004 /* UART1 is stuffed */ ++#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */ ++#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */ ++#define BD_SYSLED 0x00000020 /* System LED stuffed */ ++#define BD_EXTUARTCLK 0x00000040 /* External UART clock */ ++#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */ ++#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */ ++#define BD_WLAN0 0x00000200 /* Enable WLAN0 */ ++#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ memCap for testing */ ++#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */ ++#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */ ++#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */ ++#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */ ++#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */ ++#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */ ++#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */ ++ u16 resetConfigGpio; /* Reset factory GPIO pin */ ++ u16 sysLedGpio; /* System LED GPIO pin */ ++ ++ u32 cpuFreq; /* CPU core frequency in Hz */ ++ u32 sysFreq; /* System frequency in Hz */ ++ u32 cntFreq; /* Calculated C0_COUNT frequency */ ++ ++ u8 wlan0Mac[6]; ++ u8 enet0Mac[6]; ++ u8 enet1Mac[6]; ++ ++ u16 pciId; /* Pseudo PCIID for common code */ ++ u16 memCap; /* cap bank1 in MB */ ++ ++ /* version 3 */ ++ u8 wlan1Mac[6]; /* (ar5212) */ ++}; ++ ++#endif ++ ++#endif /* AR531X_H */ +diff -urN linux-mips-orig/drivers/net/ath/ar531xlnx.h linux-mips-new/drivers/net/ath/ar531xlnx.h +--- linux-mips-orig/drivers/net/ath/ar531xlnx.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-mips-new/drivers/net/ath/ar531xlnx.h 2005-12-31 12:33:57.676538368 +0000 +@@ -0,0 +1,137 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved. ++ */ ++ ++/* ++ * This file contains definitions needed in order to compile ++ * AR531X products for linux. Definitions that are largely ++ * AR531X-specific and independent of operating system belong ++ * in ar531x.h rather than this file. ++ */ ++#ifndef __AR531XLNX_H ++#define __AR531XLNX_H ++#include "ar531x.h" ++ ++#define MIPS_CPU_IRQ_BASE 0x00 ++#define AR531X_HIGH_PRIO 0x10 ++#define AR531X_MISC_IRQ_BASE 0x20 ++#define AR531X_GPIO_IRQ_BASE 0x30 ++ ++/* Software's idea of interrupts handled by "CPU Interrupt Controller" */ ++#if CONFIG_AR5315 ++#define AR531X_IRQ_NONE MIPS_CPU_IRQ_BASE+0 ++#define AR531X_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */ ++#define AR531X_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */ ++#define AR531X_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */ ++#define AR531X_IRQ_LCBUS_PCI MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */ ++#define AR531X_IRQ_WLAN0_POLL MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */ ++#define AR531X_IRQ_CPU_CLOCK MIPS_CPU_IRQ_BASE+7 /* C0_CAUSE: 0x8000 */ ++#else ++#define AR531X_IRQ_NONE MIPS_CPU_IRQ_BASE+0 ++#define AR531X_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */ ++#define AR531X_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */ ++#define AR531X_IRQ_ENET1_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */ ++#define AR531X_IRQ_WLAN1_INTRS MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */ ++#define AR531X_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */ ++#define AR531X_IRQ_CPU_CLOCK MIPS_CPU_IRQ_BASE+7 /* C0_CAUSE: 0x8000 */ ++#endif ++ ++/* Miscellaneous interrupts, which share IP6 or IP2 */ ++#define AR531X_MISC_IRQ_NONE AR531X_MISC_IRQ_BASE+0 ++#define AR531X_MISC_IRQ_TIMER AR531X_MISC_IRQ_BASE+1 ++#define AR531X_MISC_IRQ_AHB_PROC AR531X_MISC_IRQ_BASE+2 ++#define AR531X_MISC_IRQ_AHB_DMA AR531X_MISC_IRQ_BASE+3 ++#define AR531X_MISC_IRQ_GPIO AR531X_MISC_IRQ_BASE+4 ++#define AR531X_MISC_IRQ_UART0 AR531X_MISC_IRQ_BASE+5 ++#define AR531X_MISC_IRQ_UART0_DMA AR531X_MISC_IRQ_BASE+6 ++#define AR531X_MISC_IRQ_WATCHDOG AR531X_MISC_IRQ_BASE+7 ++#define AR531X_MISC_IRQ_LOCAL AR531X_MISC_IRQ_BASE+8 ++#define AR531X_MISC_IRQ_COUNT 9 ++ ++/* GPIO Interrupts [0..7], share AR531X_MISC_IRQ_GPIO */ ++#define AR531X_GPIO_IRQ_NONE AR531X_MISC_IRQ_BASE+0 ++#define AR531X_GPIO_IRQ(n) AR531X_MISC_IRQ_BASE+(n)+1 ++#define AR531X_GPIO_IRQ_COUNT 9 ++ ++#define PHYS_TO_K1(physaddr) KSEG1ADDR(physaddr) ++#define PHYS_TO_K0(physaddr) KSEG0ADDR(physaddr) ++#define UNMAPPED_TO_PHYS(vaddr) PHYSADDR(vaddr) ++#define IS_UNMAPPED_VADDR(vaddr) \ ++ ((KSEGX(vaddr) == KSEG0) || (KSEGX(vaddr) == KSEG1)) ++ ++/* IOCTL commands for /proc/ar531x */ ++#define AR531X_CTRL_DO_BREAKPOINT 1 ++#define AR531X_CTRL_DO_MADWIFI 2 ++ ++/* ++ * Definitions for operating system portability. ++ * These are vxWorks-->Linux translations. ++ */ ++#define LOCAL static ++#define BOOL int ++#define TRUE 1 ++#define FALSE 0 ++#define UINT8 u8 ++#define UINT16 u16 ++#define UINT32 u32 ++#define PRINTF printk ++#if /* DEBUG */ 1 ++#define DEBUG_PRINTF printk ++#define printf printk ++#define INLINE ++#else ++DEBUG_PRINTF while (0) printk ++#define INLINE inline ++#endif ++#define sysUDelay(usecs) udelay(usecs) ++#define sysMsDelay(msecs) mdelay(msecs) ++typedef volatile UINT8 *VIRT_ADDR; ++#define MALLOC(sz) kmalloc(sz, GFP_KERNEL) ++#define MALLOC_NOSLEEP(sz) kmalloc(sz, GFP_ATOMIC) ++#define FREE(ptr) kfree((void *)ptr) ++#define BSP_BUG() do { printk("kernel BSP BUG at %s:%d!\n", __FILE__, __LINE__); *(int *)0=0; } while (0) ++#define BSP_BUG_ON(condition) do { if (unlikely((condition)!=0)) BSP_BUG(); } while(0) ++#define ASSERT(x) BSP_BUG_ON(!(x)) ++ ++extern struct ar531x_boarddata *ar531x_board_configuration; ++extern char *ar531x_radio_configuration; ++extern char *enet_mac_address_get(int MACUnit); ++ ++extern void kgdbInit(void); ++extern int kgdbEnabled(void); ++extern void breakpoint(void); ++extern int kgdbInterrupt(void); ++extern unsigned int ar531x_cpu_frequency(void); ++extern unsigned int ar531x_sys_frequency(void); ++ ++/* GPIO support */ ++extern struct irqaction spurious_gpio; ++extern unsigned int gpioIntMask; ++extern void ar531x_gpio_intr_init(int irq_base); ++extern void ar531x_gpio_ctrl_output(int gpio); ++extern void ar531x_gpio_ctrl_input(int gpio); ++extern void ar531x_gpio_set(int gpio, int val); ++extern int ar531x_gpio_get(int gpio); ++extern void ar531x_gpio_intr_enable(unsigned int irq); ++extern void ar531x_gpio_intr_disable(unsigned int irq); ++ ++/* Watchdog Timer support */ ++extern int watchdog_start(unsigned int milliseconds); ++extern int watchdog_stop(void); ++extern int watchdog_is_enabled(void); ++extern unsigned int watchdog_min_timer_reached(void); ++extern void watchdog_notify_alive(void); ++ ++#define A_DATA_CACHE_INVAL(start, length) \ ++ dma_cache_inv((UINT32)(start),(length)) ++ ++#define sysWbFlush() mb() ++ ++#define intDisable(x) cli() ++#define intEnable(x) sti() ++ ++#endif /* __AR531XLNX_H */ +diff -urN linux-mips-orig/drivers/net/ath/ipPhy.c linux-mips-new/drivers/net/ath/ipPhy.c +--- linux-mips-orig/drivers/net/ath/ipPhy.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-mips-new/drivers/net/ath/ipPhy.c 2005-12-31 12:33:57.677538216 +0000 +@@ -0,0 +1,833 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved. ++ */ ++ ++/* ++ * Manage the ICPLUS ethernet PHY. ++ * ++ * All definitions in this file are operating system independent! ++ */ ++ ++#if defined(linux) ++#include ++#include ++#include ++#include ++#include ++ ++#include "ar531xlnx.h" ++#endif ++ ++#include "ae531xmac.h" ++#include "ae531xreg.h" ++#include "ipPhy.h" ++ ++/* PHY selections and access functions */ ++ ++typedef enum { ++ PHY_SRCPORT_INFO, ++ PHY_PORTINFO_SIZE, ++} PHY_CAP_TYPE; ++ ++typedef enum { ++ PHY_SRCPORT_NONE, ++ PHY_SRCPORT_VLANTAG, ++ PHY_SRCPORT_TRAILER, ++} PHY_SRCPORT_TYPE; ++ ++#ifdef DEBUG ++#define DRV_DEBUG 1 ++#endif ++#define DRV_DEBUG 1 ++ ++#if DRV_DEBUG ++#define DRV_DEBUG_PHYERROR 0x00000001 ++#define DRV_DEBUG_PHYCHANGE 0x00000002 ++#define DRV_DEBUG_PHYSETUP 0x00000004 ++ ++int ipPhyDebug = DRV_DEBUG_PHYERROR; ++ ++#define DRV_LOG(FLG, X0, X1, X2, X3, X4, X5, X6) \ ++{ \ ++ if (ipPhyDebug & (FLG)) { \ ++ logMsg(X0, X1, X2, X3, X4, X5, X6); \ ++ } \ ++} ++ ++#define DRV_MSG(x,a,b,c,d,e,f) \ ++ logMsg(x,a,b,c,d,e,f) ++ ++#define DRV_PRINT(FLG, X) \ ++{ \ ++ if (ipPhyDebug & (FLG)) { \ ++ printf X; \ ++ } \ ++} ++ ++#else /* !DRV_DEBUG */ ++#define DRV_LOG(DBG_SW, X0, X1, X2, X3, X4, X5, X6) ++#define DRV_MSG(x,a,b,c,d,e,f) ++#define DRV_PRINT(DBG_SW,X) ++#endif ++ ++#define IP_LAN_PORT_VLAN 1 ++#define IP_WAN_PORT_VLAN 2 ++ ++#define ENET_UNIT_DEFAULT 0 ++ ++/* ++ * Track per-PHY port information. ++ */ ++typedef struct { ++ BOOL isEnetPort; /* normal enet port */ ++ BOOL isPhyAlive; /* last known state of link */ ++ int ethUnit; /* MAC associated with this phy port */ ++ UINT32 phyBase; ++ UINT32 phyAddr; /* PHY registers associated with this phy port */ ++ UINT32 VLANTableSetting; /* Value to be written to VLAN table */ ++} ipPhyInfo_t; ++ ++/* ++ * Per-PHY information, indexed by PHY unit number. ++ */ ++ipPhyInfo_t ipPhyInfo[] = { ++ /* ++ * On AP30/AR5312, all PHYs are associated with MAC0. ++ * AP30/AR5312's MAC1 isn't used for anything. ++ * CONFIG_VENETDEV==1 (router) configuration: ++ * Ports 0,1,2, and 3 are "LAN ports" ++ * Port 4 is a WAN port ++ * Port 5 connects to MAC0 in the AR5312 ++ * CONFIG_VENETDEV==0 (bridge) configuration: ++ * Ports 0,1,2,3,4 are "LAN ports" ++ * Port 5 connects to the MAC0 in the AR5312 ++ */ ++ {TRUE, /* phy port 0 -- LAN port 0 */ ++ FALSE, ++ ENET_UNIT_DEFAULT, ++ (UINT32) (PHYS_TO_K1(AR531X_ENET0)+AE531X_PHY_OFFSET), ++ IP_PHY0_ADDR, ++ IP_LAN_PORT_VLAN ++ }, ++ ++ {TRUE, /* phy port 1 -- LAN port 1 */ ++ FALSE, ++ ENET_UNIT_DEFAULT, ++ (UINT32) (PHYS_TO_K1(AR531X_ENET0)+AE531X_PHY_OFFSET), ++ IP_PHY1_ADDR, ++ IP_LAN_PORT_VLAN ++ }, ++ ++ {TRUE, /* phy port 2 -- LAN port 2 */ ++ FALSE, ++ ENET_UNIT_DEFAULT, ++ (UINT32) (PHYS_TO_K1(AR531X_ENET0)+AE531X_PHY_OFFSET), ++ IP_PHY2_ADDR, ++ IP_LAN_PORT_VLAN ++ }, ++ ++ {TRUE, /* phy port 3 -- LAN port 3 */ ++ FALSE, ++ ENET_UNIT_DEFAULT, ++ (UINT32) (PHYS_TO_K1(AR531X_ENET0)+AE531X_PHY_OFFSET), ++ IP_PHY3_ADDR, ++ IP_LAN_PORT_VLAN ++ }, ++ ++ {TRUE, /* phy port 4 -- WAN port or LAN port 4 */ ++ FALSE, ++ ENET_UNIT_DEFAULT, ++ (UINT32) (PHYS_TO_K1(AR531X_ENET0)+AE531X_PHY_OFFSET), ++ IP_PHY4_ADDR, ++ IP_LAN_PORT_VLAN /* Send to all ports */ ++ }, ++ ++ {FALSE, /* phy port 5 -- CPU port (no RJ45 connector) */ ++ TRUE, ++ ENET_UNIT_DEFAULT, ++ (UINT32) (PHYS_TO_K1(AR531X_ENET0)+AE531X_PHY_OFFSET), ++ 0x00, ++ IP_LAN_PORT_VLAN /* Send to all ports */ ++ }, ++}; ++ ++#define IP_GLOBALREGBASE ((UINT32) (PHYS_TO_K1(AR531X_ENET0))) ++ ++#define IP_PHY_MAX (sizeof(ipPhyInfo) / sizeof(ipPhyInfo[0])) ++ ++/* Range of valid PHY IDs is [MIN..MAX] */ ++#define IP_ID_MIN 0 ++#define IP_ID_MAX (IP_PHY_MAX-1) ++ ++/* Convenience macros to access myPhyInfo */ ++#define IP_IS_ENET_PORT(phyUnit) (ipPhyInfo[phyUnit].isEnetPort) ++#define IP_IS_PHY_ALIVE(phyUnit) (ipPhyInfo[phyUnit].isPhyAlive) ++#define IP_ETHUNIT(phyUnit) (ipPhyInfo[phyUnit].ethUnit) ++#define IP_PHYBASE(phyUnit) (ipPhyInfo[phyUnit].phyBase) ++#define IP_PHYADDR(phyUnit) (ipPhyInfo[phyUnit].phyAddr) ++#define IP_VLAN_TABLE_SETTING(phyUnit) (ipPhyInfo[phyUnit].VLANTableSetting) ++ ++ ++#define IP_IS_ETHUNIT(phyUnit, ethUnit) \ ++ (IP_IS_ENET_PORT(phyUnit) && \ ++ IP_ETHUNIT(phyUnit) == (ethUnit)) ++ ++/* Forward references */ ++BOOL ip_phyIsLinkAlive(int phyUnit); ++LOCAL void ip_VLANInit(int ethUnit); ++LOCAL void ip_verifyReady(int ethUnit); ++#if DEBUG ++void ip_phyShow(int phyUnit); ++void ip_phySet(int phyUnit, UINT32 regnum, UINT32 value); ++void ip_globalSet(UINT32 phyAddr, UINT32 regnum, UINT32 value); ++#endif ++ ++/****************************************************************************** ++* ++* ip_phyIsLinkAlive - test to see if the specified link is alive ++* ++* RETURNS: ++* TRUE --> link is alive ++* FALSE --> link is down ++*/ ++BOOL ++ip_phyIsLinkAlive(int phyUnit) ++{ ++ UINT16 phyHwStatus; ++ UINT32 phyBase; ++ UINT32 phyAddr; ++ ++ phyBase = IP_PHYBASE(phyUnit); ++ phyAddr = IP_PHYADDR(phyUnit); ++ ++ phyHwStatus = phyRegRead(phyBase, phyAddr, IP_PHY_STATUS); ++ ++ if (phyHwStatus & IP_STATUS_LINK_PASS) { ++ return TRUE; ++ } else { ++ return FALSE; ++ } ++} ++ ++/****************************************************************************** ++* ++* ip_VLANInit - initialize "port-based VLANs" for the specified enet unit. ++*/ ++LOCAL void ++ip_VLANInit(int ethUnit) ++{ ++ int phyUnit; ++ UINT32 phyBase; ++ UINT32 phyReg; ++ ++ phyBase = IP_GLOBALREGBASE; ++ ++ for (phyUnit=0; phyUnit < IP_PHY_MAX; phyUnit++) { ++ if (IP_ETHUNIT(phyUnit) != ethUnit) { ++ continue; ++ } ++ phyRegWrite(phyBase, IP_GLOBAL_PHY29_ADDR, ++ IP_GLOBAL_PHY29_24_REG + ((phyUnit == 5) ? (phyUnit + 1) : phyUnit), ++ IP_VLAN_TABLE_SETTING(phyUnit)); ++ ++ /* Send all packets to all ports */ ++ phyReg = phyRegRead(phyBase, IP_GLOBAL_PHY30_ADDR, IP_GLOBAL_PHY30_1_REG); ++ phyReg = phyReg | ((1 << phyUnit) << IP_VLAN1_OUTPUT_PORT_MASK_S); ++ phyRegWrite(phyBase, IP_GLOBAL_PHY30_ADDR, IP_GLOBAL_PHY30_1_REG, phyReg); ++ } ++ phyReg = phyRegRead(phyBase, IP_GLOBAL_PHY30_ADDR, IP_GLOBAL_PHY30_9_REG); ++ phyReg = phyReg | TAG_VLAN_ENABLE; ++ phyReg = phyReg & ~VID_INDX_SEL_M; ++ phyRegWrite(phyBase, IP_GLOBAL_PHY30_ADDR, IP_GLOBAL_PHY30_9_REG, phyReg); ++ ++} ++ ++ ++LOCAL void ++ip_verifyReady(int ethUnit) ++{ ++ int phyUnit; ++ UINT32 phyBase = 0; ++ UINT32 phyAddr; ++ UINT16 phyID1; ++ UINT16 phyID2; ++ ++ /* ++ * The first read to the Phy port registers always fails and ++ * returns 0. So get things started with a bogus read. ++ */ ++ for (phyUnit=0; phyUnit < IP_PHY_MAX; phyUnit++) { ++ if (!IP_IS_ETHUNIT(phyUnit, ethUnit)) { ++ continue; ++ } ++ ++ phyBase = IP_PHYBASE(phyUnit); ++ phyAddr = IP_PHYADDR(phyUnit); ++ ++ phyID1 = phyRegRead(phyBase, phyAddr, IP_PHY_ID1); /* returns 0 */ ++ break; ++ } ++ ++ for (phyUnit=0; phyUnit < IP_PHY_MAX; phyUnit++) { ++ if (!IP_IS_ETHUNIT(phyUnit, ethUnit)) { ++ continue; ++ } ++ ++ /*******************/ ++ /* Verify phy port */ ++ /*******************/ ++ phyBase = IP_PHYBASE(phyUnit); ++ phyAddr = IP_PHYADDR(phyUnit); ++ ++ phyID1 = phyRegRead(phyBase, phyAddr, IP_PHY_ID1); ++ if (phyID1 != IP_PHY_ID1_EXPECTATION) { ++ DRV_PRINT(DRV_DEBUG_PHYERROR, ++ ("Invalid PHY ID1 for enet%d port%d. Expected 0x%04x, read 0x%04x\n", ++ ethUnit, ++ phyUnit, ++ IP_PHY_ID1_EXPECTATION, ++ phyID1)); ++ return; ++ } ++ ++ phyID2 = phyRegRead(phyBase, phyAddr, IP_PHY_ID2); ++ if ((phyID2 & IP_OUI_LSB_MASK) != IP_OUI_LSB_EXPECTATION) { ++ DRV_PRINT(DRV_DEBUG_PHYERROR, ++ ("Invalid PHY ID2 for enet%d port %d. Expected 0x%04x, read 0x%04x\n", ++ ethUnit, ++ phyUnit, ++ IP_OUI_LSB_EXPECTATION, ++ phyID2)); ++ return; ++ } ++ ++ DRV_PRINT(DRV_DEBUG_PHYSETUP, ++ ("Found PHY enet%d port%d: model 0x%x revision 0x%x\n", ++ ethUnit, ++ phyUnit, ++ (phyID2 & IP_MODEL_NUM_MASK) >> IP_MODEL_NUM_SHIFT, ++ (phyID2 & IP_REV_NUM_MASK) >> IP_REV_NUM_SHIFT)); ++ ++ } ++} ++ ++ ++/****************************************************************************** ++* ++* ip_phySetup - reset and setup the PHY associated with ++* the specified MAC unit number. ++* ++* Resets the associated PHY port. ++* ++* RETURNS: ++* TRUE --> associated PHY is alive ++* FALSE --> no LINKs on this ethernet unit ++*/ ++ ++BOOL ++ip_phySetup(int ethUnit, UINT32 _phyBase) ++{ ++ int phyUnit; ++ UINT16 phyHwStatus; ++ UINT16 timeout; ++ int liveLinks = 0; ++ UINT32 phyBase = 0; ++ BOOL foundPhy = FALSE; ++ UINT32 phyAddr; ++ ++ /* Reset PHYs*/ ++ for (phyUnit=0; phyUnit < IP_PHY_MAX; phyUnit++) { ++ if (!IP_IS_ETHUNIT(phyUnit, ethUnit)) { ++ continue; ++ } ++ ++ phyBase = IP_PHYBASE(phyUnit); ++ phyAddr = IP_PHYADDR(phyUnit); ++ ++ phyRegWrite(phyBase, phyAddr, IP_PHY_CONTROL, ++ IP_CTRL_SOFTWARE_RESET); ++ } ++ /* ++ * After the phy is reset, it takes a little while before ++ * it can respond properly. ++ */ ++ sysMsDelay(300); ++ /* Verify that the switch is what we think it is, and that it's ready */ ++ ip_verifyReady(ethUnit); ++ ++ /* See if there's any configuration data for this enet */ ++ for (phyUnit=0; phyUnit < IP_PHY_MAX; phyUnit++) { ++ if (IP_ETHUNIT(phyUnit) != ethUnit) { ++ continue; ++ } ++ ++ phyBase = IP_PHYBASE(phyUnit); ++ foundPhy = TRUE; ++ break; ++ } ++ ++ if (!foundPhy) { ++ return FALSE; /* No PHY's configured for this ethUnit */ ++ } ++ ++#ifdef COBRA_TODO ++ /* Initialize global switch settings */ ++ ++ /* Initialize the aging time */ ++ ++ /* Set the learning properties */ ++#endif ++ ++ /* start auto negogiation on each phy */ ++ for (phyUnit=0; phyUnit < IP_PHY_MAX; phyUnit++) { ++ if (!IP_IS_ETHUNIT(phyUnit, ethUnit)) { ++ continue; ++ } ++ ++ phyBase = IP_PHYBASE(phyUnit); ++ phyAddr = IP_PHYADDR(phyUnit); ++ ++ phyRegWrite(phyBase, phyAddr, IP_AUTONEG_ADVERT, ++ IP_ADVERTISE_ALL); ++ phyRegWrite(phyBase, phyAddr, IP_PHY_CONTROL, ++ IP_CTRL_AUTONEGOTIATION_ENABLE | IP_CTRL_START_AUTONEGOTIATION); ++ } ++ ++ /* ++ * Wait up to .75 seconds for ALL associated PHYs to finish ++ * autonegotiation. The only way we get out of here sooner is ++ * if ALL PHYs are connected AND finish autonegotiation. ++ */ ++ timeout=5; ++ for (phyUnit=0; (phyUnit < IP_PHY_MAX) /*&& (timeout > 0) */; phyUnit++) { ++ if (!IP_IS_ETHUNIT(phyUnit, ethUnit)) { ++ continue; ++ } ++ for (;;) { ++ phyBase = IP_PHYBASE(phyUnit); ++ phyAddr = IP_PHYADDR(phyUnit); ++ ++ phyHwStatus = phyRegRead(phyBase, phyAddr, IP_PHY_STATUS); ++ ++ if (IP_AUTONEG_DONE(phyHwStatus)) { ++ DRV_PRINT(DRV_DEBUG_PHYSETUP, ++ ("Port %d, Neg Success\n", phyUnit)); ++ break; ++ } ++ if (timeout == 0) { ++ DRV_PRINT(DRV_DEBUG_PHYSETUP, ++ ("Port %d, Negogiation timeout\n", phyUnit)); ++ break; ++ } ++ if (--timeout == 0) { ++ DRV_PRINT(DRV_DEBUG_PHYSETUP, ++ ("Port %d, Negogiation timeout\n", phyUnit)); ++ break; ++ } ++ ++ sysMsDelay(150); ++ } ++ } ++ ++ /* ++ * All PHYs have had adequate time to autonegotiate. ++ * Now initialize software status. ++ * ++ * It's possible that some ports may take a bit longer ++ * to autonegotiate; but we can't wait forever. They'll ++ * get noticed by mv_phyCheckStatusChange during regular ++ * polling activities. ++ */ ++ for (phyUnit=0; phyUnit < IP_PHY_MAX; phyUnit++) { ++ if (!IP_IS_ETHUNIT(phyUnit, ethUnit)) { ++ continue; ++ } ++ ++ if (ip_phyIsLinkAlive(phyUnit)) { ++ liveLinks++; ++ IP_IS_PHY_ALIVE(phyUnit) = TRUE; ++ } else { ++ IP_IS_PHY_ALIVE(phyUnit) = FALSE; ++ } ++ ++ DRV_PRINT(DRV_DEBUG_PHYSETUP, ++ ("eth%d: Phy Status=%4.4x\n", ++ ethUnit, ++ phyRegRead(IP_PHYBASE(phyUnit), ++ IP_PHYADDR(phyUnit), ++ IP_PHY_STATUS))); ++ } ++#if 0 ++ /* XXX Divy. Disable WAN/LAN seggregation. See bug 17866 */ ++ ip_VLANInit(ethUnit); ++#endif ++ return (liveLinks > 0); ++} ++ ++/****************************************************************************** ++* ++* ip_phyIsDuplexFull - Determines whether the phy ports associated with the ++* specified device are FULL or HALF duplex. ++* ++* RETURNS: ++* 1 --> FULL ++* 0 --> HALF ++*/ ++int ++ip_phyIsFullDuplex(int ethUnit) ++{ ++ int phyUnit; ++ UINT32 phyBase; ++ UINT32 phyAddr; ++ UINT16 phyHwStatus; ++ ++ for (phyUnit=0; phyUnit < IP_PHY_MAX; phyUnit++) { ++ if (!IP_IS_ETHUNIT(phyUnit, ethUnit)) { ++ continue; ++ } ++ ++ if (ip_phyIsLinkAlive(phyUnit)) { ++ ++ phyBase = IP_PHYBASE(phyUnit); ++ phyAddr = IP_PHYADDR(phyUnit); ++ ++ phyHwStatus = phyRegRead(phyBase, phyAddr, IP_LINK_PARTNER_ABILITY); ++ printk("ipPhy.c: phyHwStatus 0x%x\n",phyHwStatus); ++ if ((phyHwStatus & IP_LINK_100BASETX_FULL_DUPLEX) || ++ (phyHwStatus & IP_LINK_10BASETX_FULL_DUPLEX)) { ++ return TRUE; ++ } ++ } ++ return -1; ++ } ++ ++ return FALSE; ++ ++} ++ ++ ++/****************************************************************************** ++* ++* ip_phyIsSpeed100 - Determines the speed of phy ports associated with the ++* specified device. ++* ++* RETURNS: ++* TRUE --> 100Mbit ++* FALSE --> 10Mbit ++*/ ++ ++BOOL ++ip_phyIsSpeed100(int ethUnit) ++{ ++ int phyUnit; ++ UINT16 phyHwStatus; ++ UINT32 phyBase; ++ UINT32 phyAddr; ++ ++ for (phyUnit=0; phyUnit < IP_PHY_MAX; phyUnit++) { ++ if (!IP_IS_ETHUNIT(phyUnit, ethUnit)) { ++ continue; ++ } ++ ++ if (ip_phyIsLinkAlive(phyUnit)) { ++ ++ phyBase = IP_PHYBASE(phyUnit); ++ phyAddr = IP_PHYADDR(phyUnit); ++ ++ phyHwStatus = phyRegRead(phyBase, phyAddr, IP_LINK_PARTNER_ABILITY); ++ ++ if (phyHwStatus & IP_LINK_100BASETX) { ++ return TRUE; ++ } ++ } ++ } ++ ++ return FALSE; ++} ++ ++/***************************************************************************** ++* ++* ip_phyCheckStatusChange -- checks for significant changes in PHY state. ++* ++* A "significant change" is: ++* dropped link (e.g. ethernet cable unplugged) OR ++* autonegotiation completed + link (e.g. ethernet cable plugged in) ++* ++* When a PHY is plugged in, phyLinkGained is called. ++* When a PHY is unplugged, phyLinkLost is called. ++*/ ++ ++void ++ip_phyCheckStatusChange(int ethUnit) ++{ ++ ++ int phyUnit; ++ UINT16 phyHwStatus; ++ ipPhyInfo_t *lastStatus; ++ int linkCount = 0; ++ int lostLinks = 0; ++ int gainedLinks = 0; ++ UINT32 phyBase; ++ UINT32 phyAddr; ++ ++ for (phyUnit=0; phyUnit < IP_PHY_MAX; phyUnit++) { ++ if (!IP_IS_ETHUNIT(phyUnit, ethUnit)) { ++ continue; ++ } ++ ++ phyBase = IP_PHYBASE(phyUnit); ++ phyAddr = IP_PHYADDR(phyUnit); ++ ++ lastStatus = &ipPhyInfo[phyUnit]; ++ phyHwStatus = phyRegRead(phyBase, phyAddr, IP_PHY_STATUS); ++ ++ if (lastStatus->isPhyAlive) { /* last known link status was ALIVE */ ++ /* See if we've lost link */ ++ if (phyHwStatus & IP_STATUS_LINK_PASS) { ++ linkCount++; ++ } else { ++ lostLinks++; ++#ifdef COBRA_TODO ++ mv_flushATUDB(phyUnit); ++#endif ++ DRV_PRINT(DRV_DEBUG_PHYCHANGE,("\nenet%d port%d down\n", ++ ethUnit, phyUnit)); ++ lastStatus->isPhyAlive = FALSE; ++ } ++ } else { /* last known link status was DEAD */ ++ /* Check for AutoNegotiation complete */ ++ if (IP_AUTONEG_DONE(phyHwStatus)) { ++ gainedLinks++; ++ linkCount++; ++ DRV_PRINT(DRV_DEBUG_PHYCHANGE,("\nenet%d port%d up\n", ++ ethUnit, phyUnit)); ++ lastStatus->isPhyAlive = TRUE; ++ } ++ } ++ } ++ ++ if (linkCount == 0) { ++ if (lostLinks) { ++ /* We just lost the last link for this MAC */ ++ phyLinkLost(ethUnit); ++ } ++ } else { ++ if (gainedLinks == linkCount) { ++ /* We just gained our first link(s) for this MAC */ ++ phyLinkGained(ethUnit); ++ } ++ } ++ ++} ++ ++#if DEBUG ++ ++/* Define the registers of interest for a phyShow command */ ++typedef struct ipRegisterTableEntry_s { ++ UINT32 regNum; ++ char *regIdString; ++} ipRegisterTableEntry_t; ++ ++ipRegisterTableEntry_t ipPhyRegisterTable[] = { ++ {IP_PHY_CONTROL, "PHY Control "}, ++ {IP_PHY_STATUS, "PHY Status "}, ++ {IP_PHY_ID1, "PHY Identifier 1 "}, ++ {IP_PHY_ID2, "PHY Identifier 2 "}, ++ {IP_AUTONEG_ADVERT, "Auto-Negotiation Advertisement "}, ++ {IP_LINK_PARTNER_ABILITY, "Link Partner Ability "}, ++ {IP_AUTONEG_EXPANSION, "Auto-Negotiation Expansion "}, ++}; ++int ipPhyNumRegs = sizeof(ipPhyRegisterTable) / sizeof(ipPhyRegisterTable[0]); ++ ++ ++ipRegisterTableEntry_t ipPhy29GlobalRegisterTable[] = { ++ {IP_GLOBAL_PHY29_18_REG, "29_18_REG "}, ++ {IP_GLOBAL_PHY29_19_REG, "29_19_REG "}, ++ {IP_GLOBAL_PHY29_20_REG, "29_20_REG "}, ++ {IP_GLOBAL_PHY29_21_REG, "29_21_REG "}, ++ {IP_GLOBAL_PHY29_22_REG, "29_22_REG "}, ++ {IP_GLOBAL_PHY29_23_REG, "29_23_REG "}, ++ {IP_GLOBAL_PHY29_24_REG, "29_24_REG "}, ++ {IP_GLOBAL_PHY29_25_REG, "29_25_REG "}, ++ {IP_GLOBAL_PHY29_26_REG, "29_26_REG "}, ++ {IP_GLOBAL_PHY29_27_REG, "29_27_REG "}, ++ {IP_GLOBAL_PHY29_28_REG, "29_28_REG "}, ++ {IP_GLOBAL_PHY29_29_REG, "29_29_REG "}, ++ {IP_GLOBAL_PHY29_30_REG, "29_30_REG "}, ++ {IP_GLOBAL_PHY29_31_REG, "29_31_REG "}, ++}; ++int ipPhy29GlobalNumRegs = ++ sizeof(ipPhy29GlobalRegisterTable) / sizeof(ipPhy29GlobalRegisterTable[0]); ++ ++ ++ipRegisterTableEntry_t ipPhy30GlobalRegisterTable[] = { ++ {IP_GLOBAL_PHY30_0_REG, "30_0_REG "}, ++ {IP_GLOBAL_PHY30_1_REG, "30_1_REG "}, ++ {IP_GLOBAL_PHY30_2_REG, "30_2_REG "}, ++ {IP_GLOBAL_PHY30_3_REG, "30_3_REG "}, ++ {IP_GLOBAL_PHY30_4_REG, "30_4_REG "}, ++ {IP_GLOBAL_PHY30_5_REG, "30_5_REG "}, ++ {IP_GLOBAL_PHY30_6_REG, "30_6_REG "}, ++ {IP_GLOBAL_PHY30_7_REG, "30_7_REG "}, ++ {IP_GLOBAL_PHY30_8_REG, "30_8_REG "}, ++ {IP_GLOBAL_PHY30_9_REG, "30_9_REG "}, ++ {IP_GLOBAL_PHY30_10_REG, "30_10_REG "}, ++ {IP_GLOBAL_PHY30_11_REG, "30_11_REG "}, ++ {IP_GLOBAL_PHY30_12_REG, "30_12_REG "}, ++ {IP_GLOBAL_PHY30_13_REG, "30_13_REG "}, ++ {IP_GLOBAL_PHY30_16_REG, "30_16_REG "}, ++ {IP_GLOBAL_PHY30_17_REG, "30_17_REG "}, ++ {IP_GLOBAL_PHY30_18_REG, "30_18_REG "}, ++ {IP_GLOBAL_PHY30_20_REG, "30_20_REG "}, ++ {IP_GLOBAL_PHY30_21_REG, "30_21_REG "}, ++ {IP_GLOBAL_PHY30_22_REG, "30_22_REG "}, ++ {IP_GLOBAL_PHY30_23_REG, "30_23_REG "}, ++ {IP_GLOBAL_PHY30_24_REG, "30_24_REG "}, ++ {IP_GLOBAL_PHY30_25_REG, "30_25_REG "}, ++ {IP_GLOBAL_PHY30_26_REG, "30_26_REG "}, ++ {IP_GLOBAL_PHY30_27_REG, "30_27_REG "}, ++ {IP_GLOBAL_PHY30_28_REG, "30_28_REG "}, ++ {IP_GLOBAL_PHY30_29_REG, "30_29_REG "}, ++ {IP_GLOBAL_PHY30_30_REG, "30_30_REG "}, ++ {IP_GLOBAL_PHY30_31_REG, "30_31_REG "}, ++}; ++int ipPhy30GlobalNumRegs = ++ sizeof(ipPhy30GlobalRegisterTable) / sizeof(ipPhy30GlobalRegisterTable[0]); ++ ++ipRegisterTableEntry_t ipPhy31GlobalRegisterTable[] = { ++ {IP_GLOBAL_PHY31_0_REG, "31_0_REG "}, ++ {IP_GLOBAL_PHY31_1_REG, "31_1_REG "}, ++ {IP_GLOBAL_PHY31_2_REG, "31_2_REG "}, ++ {IP_GLOBAL_PHY31_3_REG, "31_3_REG "}, ++ {IP_GLOBAL_PHY31_4_REG, "31_4_REG "}, ++ {IP_GLOBAL_PHY31_5_REG, "31_5_REG "}, ++ {IP_GLOBAL_PHY31_6_REG, "31_6_REG "}, ++}; ++ ++int ipPhy31GlobalNumRegs = ++ sizeof(ipPhy31GlobalRegisterTable) / sizeof(ipPhy31GlobalRegisterTable[0]); ++ ++ ++/***************************************************************************** ++* ++* ip_phyShow - Dump the state of a PHY. ++* There are two sets of registers for each phy port: ++* "phy registers" and ++* "switch port registers" ++* We dump 'em all, plus the switch global registers. ++*/ ++void ++ip_phyShow(int phyUnit) ++{ ++ int i; ++ UINT16 value; ++ UINT32 phyBase; ++ UINT32 phyAddr; ++ ++ if (!ip_validPhyId(phyUnit)) { ++ return; ++ } ++ ++ phyBase = IP_PHYBASE(phyUnit); ++ phyAddr = IP_PHYADDR(phyUnit); ++ ++ printf("PHY state for PHY%d (enet%d, phyBase 0x%8x, phyAddr 0x%x)\n", ++ phyUnit, ++ IP_ETHUNIT(phyUnit), ++ IP_PHYBASE(phyUnit), ++ IP_PHYADDR(phyUnit)); ++ ++ printf("PHY Registers:\n"); ++ for (i=0; i < ipPhyNumRegs; i++) { ++ ++ value = phyRegRead(phyBase, phyAddr, ipPhyRegisterTable[i].regNum); ++ ++ printf("Reg %02d (0x%02x) %s = 0x%08x\n", ++ ipPhyRegisterTable[i].regNum, ++ ipPhyRegisterTable[i].regNum, ++ ipPhyRegisterTable[i].regIdString, ++ value); ++ } ++ ++ phyBase = IP_GLOBALREGBASE; ++ ++ printf("Switch Global Registers:\n"); ++ printf("Phy29 Registers:\n"); ++ for (i=0; i < ipPhy29GlobalNumRegs; i++) { ++ ++ value = phyRegRead(phyBase, IP_GLOBAL_PHY29_ADDR, ++ ipPhy29GlobalRegisterTable[i].regNum); ++ ++ printf("Reg %02d (0x%02x) %s = 0x%08x\n", ++ ipPhy29GlobalRegisterTable[i].regNum, ++ ipPhy29GlobalRegisterTable[i].regNum, ++ ipPhy29GlobalRegisterTable[i].regIdString, ++ value); ++ } ++ ++ printf("Phy30 Registers:\n"); ++ for (i=0; i < ipPhy30GlobalNumRegs; i++) { ++ ++ value = phyRegRead(phyBase, IP_GLOBAL_PHY30_ADDR, ++ ipPhy30GlobalRegisterTable[i].regNum); ++ ++ printf("Reg %02d (0x%02x) %s = 0x%08x\n", ++ ipPhy30GlobalRegisterTable[i].regNum, ++ ipPhy30GlobalRegisterTable[i].regNum, ++ ipPhy30GlobalRegisterTable[i].regIdString, ++ value); ++ } ++ printf("Phy31 Registers:\n"); ++ for (i=0; i < ipPhy31GlobalNumRegs; i++) { ++ ++ value = phyRegRead(phyBase, IP_GLOBAL_PHY31_ADDR, ++ ipPhy31GlobalRegisterTable[i].regNum); ++ ++ printf("Reg %02d (0x%02x) %s = 0x%08x\n", ++ ipPhy31GlobalRegisterTable[i].regNum, ++ ipPhy31GlobalRegisterTable[i].regNum, ++ ipPhy31GlobalRegisterTable[i].regIdString, ++ value); ++ } ++} ++ ++/***************************************************************************** ++* ++* ip_phySet - Modify the value of a PHY register (debug only). ++*/ ++void ++ip_phySet(int phyUnit, UINT32 regnum, UINT32 value) ++{ ++ UINT32 phyBase; ++ UINT32 phyAddr; ++ ++ if (ip_validPhyId(phyUnit)) { ++ ++ phyBase = IP_PHYBASE(phyUnit); ++ phyAddr = IP_PHYADDR(phyUnit); ++ ++ phyRegWrite(phyBase, phyAddr, regnum, value); ++ } ++} ++ ++/***************************************************************************** ++* ++* ip_globalSet - Modify the value of a global register ++* (debug only). ++*/ ++void ++ip_globalSet(UINT32 phyAddr, UINT32 regnum, UINT32 value) ++{ ++ UINT32 phyBase; ++ ++ phyBase = IP_GLOBALREGBASE; ++ ++ phyRegWrite(phyBase, phyAddr, regnum, value); ++} ++ ++ ++#endif +diff -urN linux-mips-orig/drivers/net/ath/ipPhy.h linux-mips-new/drivers/net/ath/ipPhy.h +--- linux-mips-orig/drivers/net/ath/ipPhy.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-mips-new/drivers/net/ath/ipPhy.h 2005-12-31 12:33:57.678538064 +0000 +@@ -0,0 +1,172 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved. ++ */ ++ ++/* ++ * icPhy.h - definitions for the ethernet PHY. ++ * This code supports a simple 1-port ethernet phy, ICPLUS, ++ * All definitions in this file are operating system independent! ++ */ ++ ++#ifndef IPPHY_H ++#define IPPHY_H ++ ++/*****************/ ++/* PHY Registers */ ++/*****************/ ++#define IP_PHY_CONTROL 0 ++#define IP_PHY_STATUS 1 ++#define IP_PHY_ID1 2 ++#define IP_PHY_ID2 3 ++#define IP_AUTONEG_ADVERT 4 ++#define IP_LINK_PARTNER_ABILITY 5 ++#define IP_AUTONEG_EXPANSION 6 ++ ++ ++/* IP_PHY_CONTROL fields */ ++#define IP_CTRL_SOFTWARE_RESET 0x8000 ++#define IP_CTRL_SPEED_100 0x2000 ++#define IP_CTRL_AUTONEGOTIATION_ENABLE 0x1000 ++#define IP_CTRL_START_AUTONEGOTIATION 0x0200 ++#define IP_CTRL_SPEED_FULL_DUPLEX 0x0100 ++ ++/* Phy status fields */ ++#define IP_STATUS_AUTO_NEG_DONE 0x0020 ++#define IP_STATUS_LINK_PASS 0x0004 ++ ++#define IP_AUTONEG_DONE(ip_phy_status) \ ++ (((ip_phy_status) & \ ++ (IP_STATUS_AUTO_NEG_DONE)) == \ ++ (IP_STATUS_AUTO_NEG_DONE)) ++ ++/* ICPLUS_PHY_ID1 fields */ ++#define IP_PHY_ID1_EXPECTATION 0x0243 /* OUI >> 6 */ ++ ++/* ICPLUS_PHY_ID2 fields */ ++#define IP_OUI_LSB_MASK 0xfc00 ++#define IP_OUI_LSB_EXPECTATION 0x0c00 ++#define IP_OUI_LSB_SHIFT 10 ++#define IP_MODEL_NUM_MASK 0x03f0 ++#define IP_MODEL_NUM_SHIFT 4 ++#define IP_REV_NUM_MASK 0x000f ++#define IP_REV_NUM_SHIFT 0 ++ ++/* Link Partner ability */ ++#define IP_LINK_100BASETX_FULL_DUPLEX 0x0100 ++#define IP_LINK_100BASETX 0x0080 ++#define IP_LINK_10BASETX_FULL_DUPLEX 0x0040 ++#define IP_LINK_10BASETX 0x0020 ++ ++/* Advertisement register. */ ++#define IP_ADVERTISE_100FULL 0x0100 ++#define IP_ADVERTISE_100HALF 0x0080 ++#define IP_ADVERTISE_10FULL 0x0040 ++#define IP_ADVERTISE_10HALF 0x0020 ++ ++#define IP_ADVERTISE_ALL (IP_ADVERTISE_10HALF | IP_ADVERTISE_10FULL | \ ++ IP_ADVERTISE_100HALF | IP_ADVERTISE_100FULL) ++ ++ ++#define IP_VLAN_TAG_VALID 0x81 ++#define IP_VLAN_TAG_SIZE 4 ++#define IP_VLAN_TAG_OFFSET 12 /* After DA & SA */ ++#define IP_SPECIAL_TAG_VALID 0x81 ++ ++/****************************/ ++/* Global Control Registers */ ++/****************************/ ++/* IP Global register doesn't have names based on functionality ++ * hence has to live with this names for now */ ++#define IP_GLOBAL_PHY29_18_REG 18 ++#define IP_GLOBAL_PHY29_19_REG 19 ++#define IP_GLOBAL_PHY29_20_REG 20 ++#define IP_GLOBAL_PHY29_21_REG 21 ++#define IP_GLOBAL_PHY29_22_REG 22 ++#define IP_GLOBAL_PHY29_23_REG 23 ++#define IP_GLOBAL_PHY29_24_REG 24 ++#define IP_GLOBAL_PHY29_25_REG 25 ++#define IP_GLOBAL_PHY29_26_REG 26 ++#define IP_GLOBAL_PHY29_27_REG 27 ++#define IP_GLOBAL_PHY29_28_REG 28 ++#define IP_GLOBAL_PHY29_29_REG 29 ++#define IP_GLOBAL_PHY29_30_REG 30 ++#define IP_GLOBAL_PHY29_31_REG 31 ++ ++ ++#define IP_GLOBAL_PHY30_0_REG 0 ++#define IP_GLOBAL_PHY30_1_REG 1 ++#define IP_GLOBAL_PHY30_2_REG 2 ++#define IP_GLOBAL_PHY30_3_REG 3 ++#define IP_GLOBAL_PHY30_4_REG 4 ++#define IP_GLOBAL_PHY30_5_REG 5 ++#define IP_GLOBAL_PHY30_6_REG 6 ++#define IP_GLOBAL_PHY30_7_REG 7 ++#define IP_GLOBAL_PHY30_8_REG 8 ++#define IP_GLOBAL_PHY30_9_REG 9 ++#define IP_GLOBAL_PHY30_10_REG 10 ++#define IP_GLOBAL_PHY30_11_REG 11 ++#define IP_GLOBAL_PHY30_12_REG 12 ++#define IP_GLOBAL_PHY30_13_REG 13 ++#define IP_GLOBAL_PHY30_16_REG 16 ++#define IP_GLOBAL_PHY30_17_REG 17 ++#define IP_GLOBAL_PHY30_18_REG 18 ++#define IP_GLOBAL_PHY30_20_REG 20 ++#define IP_GLOBAL_PHY30_21_REG 21 ++#define IP_GLOBAL_PHY30_22_REG 22 ++#define IP_GLOBAL_PHY30_23_REG 23 ++#define IP_GLOBAL_PHY30_24_REG 24 ++#define IP_GLOBAL_PHY30_25_REG 25 ++#define IP_GLOBAL_PHY30_26_REG 26 ++#define IP_GLOBAL_PHY30_27_REG 27 ++#define IP_GLOBAL_PHY30_28_REG 28 ++#define IP_GLOBAL_PHY30_29_REG 29 ++#define IP_GLOBAL_PHY30_30_REG 30 ++#define IP_GLOBAL_PHY30_31_REG 31 ++ ++#define IP_GLOBAL_PHY31_0_REG 0 ++#define IP_GLOBAL_PHY31_1_REG 1 ++#define IP_GLOBAL_PHY31_2_REG 2 ++#define IP_GLOBAL_PHY31_3_REG 3 ++#define IP_GLOBAL_PHY31_4_REG 4 ++#define IP_GLOBAL_PHY31_5_REG 5 ++#define IP_GLOBAL_PHY31_6_REG 6 ++ ++#define IP_GLOBAL_PHY29_31_REG 31 ++ ++ ++#define IP_VLAN0_OUTPUT_PORT_MASK_S 0 ++#define IP_VLAN1_OUTPUT_PORT_MASK_S 8 ++#define IP_VLAN2_OUTPUT_PORT_MASK_S 0 ++#define IP_VLAN3_OUTPUT_PORT_MASK_S 8 ++ ++/* Masks and shifts for 29.23 register */ ++#define IP_PORTX_ADD_TAG_S 11 ++#define IP_PORTX_REMOVE_TAG_S 6 ++#define IP_PORT5_ADD_TAG_S 1 ++#define IP_PORT5_REMOVE_TAG_S 0 ++ ++/* ++ * 30.9 Definitions ++ */ ++#define TAG_VLAN_ENABLE 0x0080 ++#define VID_INDX_SEL_M 0x0070 ++#define VID_INDX_SEL_S 4 ++ ++ ++/* PHY Addresses */ ++#define IP_PHY0_ADDR 0 ++#define IP_PHY1_ADDR 1 ++#define IP_PHY2_ADDR 2 ++#define IP_PHY3_ADDR 3 ++#define IP_PHY4_ADDR 4 ++ ++#define IP_GLOBAL_PHY29_ADDR 29 ++#define IP_GLOBAL_PHY30_ADDR 30 ++#define IP_GLOBAL_PHY31_ADDR 31 ++ ++ ++#endif +diff -urN linux-mips-orig/drivers/net/ath/kendSwitchPhy.c linux-mips-new/drivers/net/ath/kendSwitchPhy.c +--- linux-mips-orig/drivers/net/ath/kendSwitchPhy.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-mips-new/drivers/net/ath/kendSwitchPhy.c 2005-12-31 12:33:57.678538064 +0000 +@@ -0,0 +1,286 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved. ++ */ ++ ++/* ++ * Manage the ethernet PHY. ++ * This code supports a simple 1-port ethernet phy, Realtek RTL8201BL, ++ * and compatible PHYs, such as the Kendin KS8721B. ++ * All definitions in this file are operating system independent! ++ */ ++ ++#if defined(linux) ++#include ++#include ++#include ++#include ++#include ++ ++#include "ar531xlnx.h" ++#endif ++ ++#if defined(__ECOS) ++#include "ae531xecos.h" ++#endif ++ ++ ++#include "ae531xmac.h" ++#include "ae531xreg.h" ++#include "rtPhy.h" ++ ++#define RT_MAX_PORTS 5 /* max addressable ports per MIIM */ ++ ++#if /* DEBUG */ 1 ++#define RT_DEBUG_ERROR 0x00000001 ++#define RT_DEBUG_PHYSETUP 0x00000002 ++#define RT_DEBUG_PHYCHANGE 0x00000004 ++ ++/* XXX: must hardcode this since same MIIM for all ethUnits */ ++const UINT32 phyBase = 0xb8100000; ++ ++int rtPhyDebug = RT_DEBUG_ERROR; ++ ++#define RT_PRINT(FLG, X) \ ++{ \ ++ if (rtPhyDebug & (FLG)) { \ ++ DEBUG_PRINTF X; \ ++ } \ ++} ++#else ++#define RT_PRINT(FLG, X) ++#endif ++ ++/* ++ * Track per-PHY state. ++ */ ++static BOOL rtPhyAlive[RT_MAX_PORTS]; ++ ++ ++/****************************************************************************** ++* ++* rt_phySetup - reset and setup the PHY associated with ++* the specified MAC unit number. ++* ++* Resets the associated PHY port. ++* ++* RETURNS: ++* TRUE --> associated PHY is alive ++* FALSE --> no LINKs on this ethernet unit ++*/ ++ ++BOOL ++rt_phySetup(int ethUnit, UINT32 phyBaseIgnored) ++{ ++ BOOL linkAlive = FALSE; ++ ++ /* Reset phy */ ++ if (ethUnit == 0) { ++ int i; ++ for (i=1; i<5; i++) { ++ phyRegWrite(phyBase, i, GEN_ctl, AUTONEGENA); ++ sysMsDelay(200); ++ if (phyRegRead(phyBase, i, GEN_sts) & (AUTOCMPLT | LINK)) { ++ rtPhyAlive[i] = TRUE; ++ } ++ else { ++ rtPhyAlive[i] = FALSE; ++ } ++ } ++ } ++ else { ++ phyRegWrite(phyBase, 5, GEN_ctl, AUTONEGENA); ++ sysMsDelay(200); ++ if (phyRegRead(phyBase, 5, GEN_sts) & (AUTOCMPLT | LINK)) { ++ rtPhyAlive[5] = TRUE; ++ } ++ else { ++ rtPhyAlive[5] = FALSE; ++ } ++ } ++ ++ return linkAlive; ++} ++ ++/****************************************************************************** ++* ++* rt_phyIsDuplexFull - Determines whether the phy ports associated with the ++* specified device are FULL or HALF duplex. ++* ++* RETURNS: ++* 1 --> FULL ++* 0 --> HALF ++*/ ++int ++rt_phyIsFullDuplex(int ethUnit) ++{ ++ UINT16 phyLpa = 0; ++ ++ if (ethUnit == 0) { ++ int i; ++ /* 4 ports connected. If any are half-duplex report half. */ ++ for (i=1; i<5; i++) { ++ phyLpa = phyRegRead(phyBase, i, AN_lpa); ++ if ( (!(phyLpa & (LPA_TXFD | LPA_10FD))) && ++ (phyLpa & (LPA_TX | LPA_10)) ) { ++ return 0; ++ } ++ } ++ return 1; ++ } ++ else { ++ phyLpa = phyRegRead(phyBase, 5, AN_lpa); ++ if (phyLpa & (LPA_TXFD | LPA_10FD) ) { ++ return 1; ++ } ++ else { ++ return 0; ++ } ++ } ++} ++ ++/****************************************************************************** ++* ++* rt_phyIsSpeed100 - Determines the speed of phy ports associated with the ++* specified device. ++* ++* RETURNS: ++* TRUE --> 100Mbit ++* FALSE --> 10Mbit ++*/ ++BOOL ++rt_phyIsSpeed100(int ethUnit) ++{ ++ UINT16 phyLpa; ++ ++ if (ethUnit == 0) { ++ int i; ++ /* 4 ports connected. If any are not 100 report 10. */ ++ for (i=1; i<5; i++) { ++ phyLpa = phyRegRead(phyBase, i, AN_lpa); ++ if ( (!(phyLpa & (LPA_TXFD | LPA_TX))) && ++ (phyLpa & (LPA_10FD | LPA_10)) ) { ++ printk("10\n"); ++ return FALSE; ++ } ++ } ++ printk("100\n"); ++ return TRUE; ++ } ++ else { ++ phyLpa = phyRegRead(phyBase, 5, AN_lpa); ++ if (phyLpa & (LPA_TXFD | LPA_TX) ) { ++ printk("100\n"); ++ return TRUE; ++ } ++ else { ++ printk("10\n"); ++ return FALSE; ++ } ++ } ++} ++ ++/***************************************************************************** ++* ++* rt_phyCheckStatusChange -- checks for significant changes in PHY state. ++* ++* A "significant change" is: ++* dropped link (e.g. ethernet cable unplugged) OR ++* autonegotiation completed + link (e.g. ethernet cable plugged in) ++* ++* When a PHY is plugged in, phyLinkGained is called. ++* When a PHY is unplugged, phyLinkLost is called. ++*/ ++void ++rt_phyCheckStatusChange(int ethUnit) ++{ ++ UINT16 phyHwStatus; ++ int i, loopLower, loopUpper; ++ ++ if (ethUnit == 0) { ++ loopLower = 1; ++ loopUpper = 4; ++ } ++ else { ++ loopLower = 5; ++ loopUpper = 5; ++ } ++ ++ for (i=loopLower; i<=loopUpper; i++) { ++ phyHwStatus = phyRegRead(phyBase, i, GEN_sts); ++ ++ if (rtPhyAlive[i]) { /* last known status was ALIVE */ ++ /* See if we've lost link */ ++ if (!(phyHwStatus & LINK)) { ++ RT_PRINT(RT_DEBUG_PHYCHANGE,("\nethmac%d link down\n", ethUnit)); ++ rtPhyAlive[i] = FALSE; ++ phyLinkLost(ethUnit); ++ } ++ } else { /* last known status was DEAD */ ++ /* Check for AN complete */ ++ if ((phyHwStatus & (AUTOCMPLT | LINK)) == (AUTOCMPLT | LINK)) { ++ RT_PRINT(RT_DEBUG_PHYCHANGE,("\nethmac%d link up\n", ethUnit)); ++ rtPhyAlive[i] = TRUE; ++ phyLinkGained(ethUnit); ++ } ++ } ++ } ++} ++ ++#if DEBUG ++ ++/* Define the PHY registers of interest for a phyShow command */ ++struct rtRegisterTable_s { ++ UINT32 regNum; ++ char *regIdString; ++} rtRegisterTable[] = ++{ ++ {GEN_ctl, "Basic Mode Control (GEN_ctl) "}, ++ {GEN_sts, "Basic Mode Status (GEN_sts) "}, ++ {GEN_id_hi, "PHY Identifier 1 (GET_id_hi) "}, ++ {GEN_id_lo, "PHY Identifier 2 (GET_id_lo) "}, ++ {AN_adv, "Auto-Neg Advertisement (AN_adv) "}, ++ {AN_lpa, "Auto-Neg Link Partner Ability "}, ++ {AN_exp, "Auto-Neg Expansion "}, ++}; ++ ++int rtNumRegs = sizeof(rtRegisterTable) / sizeof(rtRegisterTable[0]); ++ ++/* ++ * Dump the state of a PHY. ++ */ ++void ++rt_phyShow(int phyUnit) ++{ ++ int i; ++ UINT16 value; ++ int j, loopLower, loopUpper; ++ ++ printf("PHY state for ethphy%d\n", phyUnit); ++ ++ if (phyUnit == 0) { ++ loopLower = 1; ++ loopUpper = 4; ++ } ++ else { ++ loopLower = 5; ++ loopUpper = 5; ++ } ++ ++ for (j=loopLower; j<=loopUpper; j++) { ++ printk("PHY port %d:\n", j); ++ for (i=0; i link is alive ++* FALSE --> link is down ++*/ ++BOOL ++mv_phyIsLinkAlive(int phyUnit) ++{ ++ UINT16 phyHwStatus; ++ UINT32 phyBase; ++ UINT32 phyAddr; ++ ++ phyBase = MV_PHYBASE(phyUnit); ++ phyAddr = MV_PHYADDR(phyUnit); ++ ++ phyHwStatus = phyRegRead(phyBase, phyAddr, MV_PHY_SPECIFIC_STATUS); ++ ++ if (phyHwStatus & MV_STATUS_REAL_TIME_LINK_UP) { ++ return TRUE; ++ } else { ++ return FALSE; ++ } ++} ++ ++/****************************************************************************** ++* ++* mv_VLANInit - initialize "port-based VLANs" for the specified enet unit. ++*/ ++LOCAL void ++mv_VLANInit(int ethUnit) ++{ ++ int phyUnit; ++ UINT32 phyBase; ++ UINT32 switchPortAddr; ++ ++ for (phyUnit=0; phyUnit < MV_PHY_MAX; phyUnit++) { ++ if (MV_ETHUNIT(phyUnit) != ethUnit) { ++ continue; ++ } ++ ++ phyBase = MV_PHYBASE(phyUnit); ++ switchPortAddr = MV_SWITCH_PORT_ADDR(phyUnit); ++ ++ phyRegWrite(phyBase, switchPortAddr, MV_PORT_BASED_VLAN_MAP, ++ MV_VLAN_TABLE_SETTING(phyUnit)); ++ } ++} ++ ++#define phyPortConfigured(phyUnit) TRUE /* TBDFREEDOM2 */ ++ ++/****************************************************************************** ++* ++* mv_enableConfiguredPorts - enable whichever PHY ports are supposed ++* to be enabled according to administrative configuration. ++*/ ++LOCAL void ++mv_enableConfiguredPorts(int ethUnit) ++{ ++ int phyUnit; ++ UINT32 phyBase; ++ UINT32 switchPortAddr; ++ UINT16 portControl; ++ UINT16 portAssociationVector; ++ ++ for (phyUnit=0; phyUnit < MV_PHY_MAX; phyUnit++) { ++ if (MV_ETHUNIT(phyUnit) != ethUnit) { ++ continue; ++ } ++ ++ phyBase = MV_PHYBASE(phyUnit); ++ switchPortAddr = MV_SWITCH_PORT_ADDR(phyUnit); ++ ++ if (phyPortConfigured(phyUnit)) { ++ ++ portControl = MV_PORT_CONTROL_PORT_STATE_FORWARDING; ++#if CONFIG_VENETDEV ++ if (!MV_IS_ENET_PORT(phyUnit)) { /* CPU port */ ++ portControl |= MV_PORT_CONTROL_INGRESS_TRAILER ++ | MV_PORT_CONTROL_EGRESS_MODE; ++ } ++#endif ++ phyRegWrite(phyBase, switchPortAddr, MV_PORT_CONTROL, portControl); ++ ++ portAssociationVector = 1 << phyUnit; ++ ++ phyRegWrite(phyBase, switchPortAddr, ++ MV_PORT_ASSOCIATION_VECTOR, portAssociationVector); ++ } ++ } ++} ++ ++/****************************************************************************** ++* ++* mv_verifyReady - validates that we're dealing with the device ++* we think we're dealing with, and that it's ready. ++*/ ++LOCAL void ++mv_verifyReady(int ethUnit) ++{ ++ int phyUnit; ++ UINT16 globalStatus; ++ UINT32 phyBase = 0; ++ UINT32 phyAddr; ++ UINT32 switchPortAddr; ++ UINT16 phyID1; ++ UINT16 phyID2; ++ UINT16 switchID; ++ ++ /* ++ * The first read to the Phy port registers always fails and ++ * returns 0. So get things started with a bogus read. ++ */ ++ for (phyUnit=0; phyUnit < MV_PHY_MAX; phyUnit++) { ++ if (!MV_IS_ETHUNIT(phyUnit, ethUnit)) { ++ continue; ++ } ++ phyBase = MV_PHYBASE(phyUnit); ++ phyAddr = MV_PHYADDR(phyUnit); ++ ++ (void)phyRegRead(phyBase, phyAddr, MV_PHY_ID1); /* returns 0 */ ++ break; ++ } ++ ++ for (phyUnit=0; phyUnit < MV_PHY_MAX; phyUnit++) { ++ if (!MV_IS_ETHUNIT(phyUnit, ethUnit)) { ++ continue; ++ } ++ ++ /*******************/ ++ /* Verify phy port */ ++ /*******************/ ++ phyBase = MV_PHYBASE(phyUnit); ++ phyAddr = MV_PHYADDR(phyUnit); ++ ++ phyID1 = phyRegRead(phyBase, phyAddr, MV_PHY_ID1); ++ if (phyID1 != MV_PHY_ID1_EXPECTATION) { ++ MV_PRINT(MV_DEBUG_PHYSETUP, ++ ("Invalid PHY ID1 for ethmac%d port%d. Expected 0x%04x, read 0x%04x\n", ++ ethUnit, ++ phyUnit, ++ MV_PHY_ID1_EXPECTATION, ++ phyID1)); ++ return; ++ } ++ ++ phyID2 = phyRegRead(phyBase, phyAddr, MV_PHY_ID2); ++ if ((phyID2 & MV_OUI_LSB_MASK) != MV_OUI_LSB_EXPECTATION) { ++ MV_PRINT(MV_DEBUG_PHYSETUP, ++ ("Invalid PHY ID2 for ethmac%d port %d. Expected 0x%04x, read 0x%04x\n", ++ ethUnit, ++ phyUnit, ++ MV_OUI_LSB_EXPECTATION, ++ phyID2)); ++ return; ++ } ++ ++ MV_PRINT(MV_DEBUG_PHYSETUP, ++ ("Found PHY ethmac%d port%d: model 0x%x revision 0x%x\n", ++ ethUnit, ++ phyUnit, ++ (phyID2 & MV_MODEL_NUM_MASK) >> MV_MODEL_NUM_SHIFT, ++ (phyID2 & MV_REV_NUM_MASK) >> MV_REV_NUM_SHIFT)); ++ ++ ++ /**********************/ ++ /* Verify switch port */ ++ /**********************/ ++ switchPortAddr = MV_SWITCH_PORT_ADDR(phyUnit); ++ ++ switchID = phyRegRead(phyBase, switchPortAddr, MV_SWITCH_ID); ++ if ((switchID & MV_SWITCH_ID_DEV_MASK) != ++ MV_SWITCH_ID_DEV_EXPECTATION) { ++ ++ MV_PRINT(MV_DEBUG_PHYSETUP, ++ ("Invalid switch ID for ethmac%d port %d. Expected 0x%04x, read 0x%04x\n", ++ ethUnit, ++ phyUnit, ++ MV_SWITCH_ID_DEV_EXPECTATION, ++ switchID)); ++ return; ++ } ++ ++ MV_PRINT(MV_DEBUG_PHYSETUP, ++ ("Found PHY switch for enet %d port %d deviceID 0x%x revision 0x%x\n", ++ ethUnit, ++ phyUnit, ++ (switchID & MV_SWITCH_ID_DEV_MASK) >> MV_SWITCH_ID_DEV_SHIFT, ++ (switchID & MV_SWITCH_ID_REV_MASK) >> MV_SWITCH_ID_REV_SHIFT)) ++ } ++ ++ /*******************************/ ++ /* Verify that switch is ready */ ++ /*******************************/ ++ if (phyBase) { ++ globalStatus = phyRegRead(phyBase, MV_SWITCH_GLOBAL_ADDR, ++ MV_SWITCH_GLOBAL_STATUS); ++ ++ if (!(globalStatus & MV_SWITCH_STATUS_READY_MASK)) { ++ MV_PRINT(MV_DEBUG_PHYSETUP, ++ ("PHY switch for ethmac%d NOT ready!\n", ++ ethUnit)); ++ } ++ } else { ++ MV_PRINT(MV_DEBUG_PHYSETUP, ++ ("No ports configured for ethmac%d\n", ethUnit)); ++ } ++} ++ ++/****************************************************************************** ++* ++* mv_phySetup - reset and setup the PHY switch. ++* ++* Resets each PHY port. ++* ++* RETURNS: ++* TRUE --> at least 1 PHY with LINK ++* FALSE --> no LINKs on this ethernet unit ++*/ ++BOOL ++mv_phySetup(int ethUnit, UINT32 phyBase) ++{ ++ int phyUnit; ++ int liveLinks = 0; ++ BOOL foundPhy = FALSE; ++ UINT32 phyAddr; ++ UINT16 atuControl; ++ ++ /* ++ * Allow platform-specific code to determine the default Ethernet MAC ++ * at run-time. If phyEthMacDefault returns a negative value, use the ++ * static mvPhyInfo table "as is". But if phyEthMacDefault returns a ++ * non-negative value, use it as the default ethernet unit. ++ */ ++ { ++ int ethMacDefault = phyEthMacDefault(); ++ ++ if (ethMacDefault >= 0) { ++ for (phyUnit=0; phyUnit < MV_PHY_MAX; phyUnit++) { ++ MV_ETHUNIT(phyUnit)=ethMacDefault; ++ } ++ } ++ } ++ ++ /* ++ * See if there's any configuration data for this enet, ++ * and set up phyBase in table. ++ */ ++ for (phyUnit=0; phyUnit < MV_PHY_MAX; phyUnit++) { ++ if (MV_ETHUNIT(phyUnit) != ethUnit) { ++ continue; ++ } ++ ++ MV_PHYBASE(phyUnit) = phyBase; ++ foundPhy = TRUE; ++ } ++ ++ if (!foundPhy) { ++ return FALSE; /* No PHY's configured for this ethUnit */ ++ } ++ ++ /* Verify that the switch is what we think it is, and that it's ready */ ++ mv_verifyReady(ethUnit); ++ ++ /* Initialize global switch settings */ ++ atuControl = MV_ATUCTRL_AGE_TIME_DEFAULT << MV_ATUCTRL_AGE_TIME_SHIFT; ++ atuControl |= MV_ATUCTRL_ATU_SIZE_DEFAULT << MV_ATUCTRL_ATU_SIZE_SHIFT; ++ phyRegWrite(phyBase, MV_SWITCH_GLOBAL_ADDR, MV_ATU_CONTROL, atuControl); ++ ++ /* Reset PHYs and start autonegoation on each. */ ++ for (phyUnit=0; phyUnit < MV_PHY_MAX; phyUnit++) { ++ if (MV_ETHUNIT(phyUnit) != ethUnit) { ++ continue; ++ } ++ ++ phyBase = MV_PHYBASE(phyUnit); ++ phyAddr = MV_PHYADDR(phyUnit); ++ ++ phyRegWrite(phyBase, phyAddr, MV_PHY_CONTROL, ++ MV_CTRL_SOFTWARE_RESET | MV_CTRL_AUTONEGOTIATION_ENABLE); ++ } ++ ++#if 0 /* Don't wait -- we'll detect shortly after the link comes up */ ++{ ++ int timeout; ++ UINT16 phyHwStatus; ++ ++ /* ++ * Wait 5 seconds for ALL associated PHYs to finish autonegotiation. ++ */ ++ timeout=50; ++ for (phyUnit=0; (phyUnit < MV_PHY_MAX) && (timeout > 0); phyUnit++) { ++ if (!MV_IS_ETHUNIT(phyUnit, ethUnit)) { ++ continue; ++ } ++ for (;;) { ++ phyBase = MV_PHYBASE(phyUnit); ++ phyAddr = MV_PHYADDR(phyUnit); ++ ++ phyHwStatus = phyRegRead(phyBase, phyAddr, MV_PHY_SPECIFIC_STATUS); ++ ++ if (MV_AUTONEG_DONE(phyHwStatus)) { ++ break; ++ } ++ ++ if (--timeout == 0) { ++ break; ++ } ++ ++ sysMsDelay(100); ++ } ++ } ++} ++#endif ++ ++ /* ++ * All PHYs have had adequate time to autonegotiate. ++ * Now initialize software status. ++ * ++ * It's possible that some ports may take a bit longer ++ * to autonegotiate; but we can't wait forever. They'll ++ * get noticed by mv_phyCheckStatusChange during regular ++ * polling activities. ++ */ ++ for (phyUnit=0; phyUnit < MV_PHY_MAX; phyUnit++) { ++ if (!MV_IS_ETHUNIT(phyUnit, ethUnit)) { ++ continue; ++ } ++ ++ if (mv_phyIsLinkAlive(phyUnit)) { ++ liveLinks++; ++ MV_IS_PHY_ALIVE(phyUnit) = TRUE; ++ } else { ++ MV_IS_PHY_ALIVE(phyUnit) = FALSE; ++ } ++ ++ MV_PRINT(MV_DEBUG_PHYSETUP, ++ ("ethmac%d: Phy Status=%4.4x\n", ++ ethUnit, ++ phyRegRead(MV_PHYBASE(phyUnit), ++ MV_PHYADDR(phyUnit), ++ MV_PHY_SPECIFIC_STATUS))); ++ } ++ ++ mv_VLANInit(ethUnit); ++ ++ mv_enableConfiguredPorts(ethUnit); ++ ++ return (liveLinks > 0); ++} ++ ++ ++/****************************************************************************** ++* ++* mv_phyIsDuplexFull - Determines whether the phy ports associated with the ++* specified device are FULL or HALF duplex. ++* ++* RETURNS: ++* 1 --> at least one associated PHY in FULL DUPLEX ++* 0 --> all half duplex ++* -1 --> No links ++*/ ++int ++mv_phyIsFullDuplex(int ethUnit) ++{ ++ int phyUnit; ++ UINT32 phyBase; ++ UINT32 phyAddr; ++ UINT16 phyHwStatus; ++ int oneIsReady=0; ++ ++ for (phyUnit=0; phyUnit < MV_PHY_MAX; phyUnit++) { ++ if (!MV_IS_ETHUNIT(phyUnit, ethUnit)) { ++ continue; ++ } ++ ++ if (mv_phyIsLinkAlive(phyUnit)) { ++ oneIsReady = 1; ++ ++ phyBase = MV_PHYBASE(phyUnit); ++ phyAddr = MV_PHYADDR(phyUnit); ++ ++ phyHwStatus = phyRegRead(phyBase, phyAddr, MV_PHY_SPECIFIC_STATUS); ++ ++ if (phyHwStatus & MV_STATUS_RESOLVED_DUPLEX_FULL) { ++ return 1; ++ } ++ } ++ } ++ if (oneIsReady) ++ return 0; ++ else ++ return -1; ++} ++ ++/****************************************************************************** ++* ++* mv_phyIsSpeed100 - Determines the speed of a phy port ++* ++* RETURNS: ++* TRUE --> PHY operating at 100 Mbit ++* FALSE --> link down, or not operating at 100 Mbit ++*/ ++BOOL ++mv_phyIsSpeed100(int phyUnit) ++{ ++ UINT16 phyHwStatus; ++ UINT32 phyBase; ++ UINT32 phyAddr; ++ ++ if (MV_IS_ENET_PORT(phyUnit)) { ++ if (mv_phyIsLinkAlive(phyUnit)) { ++ ++ phyBase = MV_PHYBASE(phyUnit); ++ phyAddr = MV_PHYADDR(phyUnit); ++ ++ phyHwStatus = phyRegRead(phyBase, phyAddr, MV_PHY_SPECIFIC_STATUS); ++ ++ if (phyHwStatus & MV_STATUS_RESOLVED_SPEED_100) { ++ return TRUE; ++ } ++ } ++ } ++ ++ return FALSE; ++} ++ ++#if CONFIG_VENETDEV ++/****************************************************************************** ++* ++* mv_phyDetermineSource - Examine a received frame's Egress Trailer ++* to determine whether it came from a LAN or WAN port. ++* ++* RETURNS: ++* Sets *pFromLAN: 1-->LAN, 0-->WAN ++* Modifies *pLen to remove PHY trailer from frame ++*/ ++void ++mv_phyDetermineSource(char *data, int len, int *pFromLAN) ++{ ++ unsigned char *phyTrailer; ++ unsigned char incomingPort; ++ ++ phyTrailer = &data[len - MV_PHY_TRAILER_SIZE]; ++ ASSERT(phyTrailer[0] == MV_EGRESS_TRAILER_VALID); ++ ++ incomingPort = phyTrailer[1]; ++ if (MV_IS_LAN_PORT(incomingPort)) { ++ *pFromLAN = 1; ++ } else { ++ ASSERT(MV_IS_WAN_PORT(incomingPort)); ++ *pFromLAN = 0; ++ } ++} ++ ++ ++/****************************************************************************** ++* ++* mv_phySetDestinationPort - Set the Ingress Trailer to force the ++* frame to be sent to LAN or WAN, as specified. ++* ++*/ ++void ++mv_phySetDestinationPort(char *data, int len, int fromLAN) ++{ ++ char *phyTrailer; ++ ++ phyTrailer = &data[len]; ++ if (fromLAN) { ++ /* LAN ports: Use default settings, as per mvPhyInfo */ ++ phyTrailer[0] = 0x00; ++ phyTrailer[1] = 0x00; ++ } else { ++ /* WAN port: Direct to WAN port */ ++ phyTrailer[0] = MV_INGRESS_TRAILER_OVERRIDE; ++ phyTrailer[1] = 1 << MV_WAN_PORT; ++ } ++ phyTrailer[2] = 0x00; ++ phyTrailer[3] = 0x00; ++} ++#endif ++ ++ ++/***************************************************************************** ++* ++* Validate that the specified PHY unit number is a valid PHY ID. ++* Print a message if it is invalid. ++* RETURNS ++* TRUE --> valid ++* FALSE --> invalid ++*/ ++LOCAL BOOL ++mv_validPhyId(int phyUnit) ++{ ++ if ((phyUnit >= MV_ID_MIN) && (phyUnit <= MV_ID_MAX)) { ++ return TRUE; ++ } else { ++ PRINTF("PHY unit number must be in the range [%d..%d]\n", ++ MV_ID_MIN, MV_ID_MAX); ++ return FALSE; ++ } ++} ++ ++ ++/***************************************************************************** ++* ++* mv_waitWhileATUBusy - spins until the ATU completes ++* its previous operation. ++*/ ++LOCAL void ++mv_waitWhileATUBusy(UINT32 phyBase) ++{ ++ BOOL isBusy; ++ UINT16 ATUOperation; ++ ++ do { ++ ++ ATUOperation = phyRegRead(phyBase, MV_SWITCH_GLOBAL_ADDR, ++ MV_ATU_OPERATION); ++ ++ isBusy = (ATUOperation & MV_ATU_BUSY_MASK) == MV_ATU_IS_BUSY; ++ ++ } while(isBusy); ++} ++ ++/***************************************************************************** ++* ++* mv_flushATUDB - flushes ALL entries in the Address Translation Unit ++* DataBase associated with phyUnit. [Since we use a single DB for ++* all PHYs, this flushes the entire shared DataBase.] ++* ++* The current implementation flushes even more than absolutely needed -- ++* it flushes all entries for all phyUnits on the same ethernet as the ++* specified phyUnit. ++* ++* It is called only when a link failure is detected on a port that was ++* previously working. In other words, when the cable is unplugged. ++*/ ++void ++mv_flushATUDB(int phyUnit) ++{ ++ UINT32 phyBase; ++ ++ if (!mv_validPhyId(phyUnit)) { ++ PRINTF("Invalid port number: %d\n", phyUnit); ++ return; ++ } ++ ++ phyBase = MV_PHYBASE(phyUnit); ++ ++ /* Wait for previous operation (if any) to complete */ ++ mv_waitWhileATUBusy(phyBase); ++ ++ /* Tell hardware to flush all entries */ ++ phyRegWrite(phyBase, MV_SWITCH_GLOBAL_ADDR, MV_ATU_OPERATION, ++ MV_ATU_OP_FLUSH_ALL | MV_ATU_IS_BUSY); ++ ++ mv_waitWhileATUBusy(phyBase); ++} ++ ++/***************************************************************************** ++* ++* mv_phyCheckStatusChange -- checks for significant changes in PHY state. ++* ++* A "significant change" is: ++* dropped link (e.g. ethernet cable unplugged) OR ++* autonegotiation completed + link (e.g. ethernet cable plugged in) ++*/ ++void ++mv_phyCheckStatusChange(int ethUnit) ++{ ++ int phyUnit; ++ UINT16 phyHwStatus; ++ mvPhyInfo_t *lastStatus; ++ int linkCount = 0; ++ int lostLinks = 0; ++ int gainedLinks = 0; ++ UINT32 phyBase; ++ UINT32 phyAddr; ++ ++ for (phyUnit=0; phyUnit < MV_PHY_MAX; phyUnit++) { ++ if (!MV_IS_ETHUNIT(phyUnit, ethUnit)) { ++ continue; ++ } ++ ++ phyBase = MV_PHYBASE(phyUnit); ++ phyAddr = MV_PHYADDR(phyUnit); ++ ++ lastStatus = &mvPhyInfo[phyUnit]; ++ phyHwStatus = phyRegRead(phyBase, phyAddr, MV_PHY_SPECIFIC_STATUS); ++ ++ if (lastStatus->isPhyAlive) { /* last known link status was ALIVE */ ++ /* See if we've lost link */ ++ if (phyHwStatus & MV_STATUS_REAL_TIME_LINK_UP) { ++ linkCount++; ++ } else { ++ lostLinks++; ++ mv_flushATUDB(phyUnit); ++ MV_PRINT(MV_DEBUG_PHYCHANGE,("\nethmac%d port%d down\n", ++ ethUnit, phyUnit)); ++ lastStatus->isPhyAlive = FALSE; ++ } ++ } else { /* last known link status was DEAD */ ++ /* Check for AutoNegotiation complete */ ++ if (MV_AUTONEG_DONE(phyHwStatus)) { ++ gainedLinks++; ++ linkCount++; ++ MV_PRINT(MV_DEBUG_PHYCHANGE,("\nethmac%d port%d up\n", ++ ethUnit, phyUnit)); ++ lastStatus->isPhyAlive = TRUE; ++ } ++ } ++ } ++ ++ if (linkCount == 0) { ++ if (lostLinks) { ++ /* We just lost the last link for this MAC */ ++ phyLinkLost(ethUnit); ++ } ++ } else { ++ if (gainedLinks == linkCount) { ++ /* We just gained our first link(s) for this MAC */ ++ phyLinkGained(ethUnit); ++ } ++ } ++} ++ ++#if DEBUG ++ ++/* Define the registers of interest for a phyShow command */ ++typedef struct mvRegisterTableEntry_s { ++ UINT32 regNum; ++ char *regIdString; ++} mvRegisterTableEntry_t; ++ ++mvRegisterTableEntry_t mvPhyRegisterTable[] = { ++ {MV_PHY_CONTROL, "PHY Control "}, ++ {MV_PHY_STATUS, "PHY Status "}, ++ {MV_PHY_ID1, "PHY Identifier 1 "}, ++ {MV_PHY_ID2, "PHY Identifier 2 "}, ++ {MV_AUTONEG_ADVERT, "Auto-Negotiation Advertisement "}, ++ {MV_LINK_PARTNER_ABILITY, "Link Partner Ability "}, ++ {MV_AUTONEG_EXPANSION, "Auto-Negotiation Expansion "}, ++ {MV_NEXT_PAGE_TRANSMIT, "Next Page Transmit "}, ++ {MV_LINK_PARTNER_NEXT_PAGE, "Link Partner Next Page "}, ++ {MV_PHY_SPECIFIC_CONTROL_1, "PHY-Specific Control Register 1 "}, ++ {MV_PHY_SPECIFIC_STATUS, "PHY-Specific Status "}, ++ {MV_PHY_INTERRUPT_ENABLE, "PHY Interrupt Enable "}, ++ {MV_PHY_INTERRUPT_STATUS, "PHY Interrupt Status "}, ++ {MV_PHY_INTERRUPT_PORT_SUMMARY, "PHY Interrupt Port Summary "}, ++ {MV_RECEIVE_ERROR_COUNTER, "Receive Error Counter "}, ++ {MV_LED_PARALLEL_SELECT, "LED Parallel Select "}, ++ {MV_LED_STREAM_SELECT_LEDS, "LED Stream Select "}, ++ {MV_PHY_LED_CONTROL, "PHY LED Control "}, ++ {MV_PHY_MANUAL_LED_OVERRIDE, "PHY Manual LED Override "}, ++ {MV_VCT_CONTROL, "VCT Control "}, ++ {MV_VCT_STATUS, "VCT Status "}, ++ {MV_PHY_SPECIFIC_CONTROL_2, "PHY-Specific Control Register 2 "}, ++}; ++int mvPhyNumRegs = sizeof(mvPhyRegisterTable) / sizeof(mvPhyRegisterTable[0]); ++ ++ ++mvRegisterTableEntry_t mvSwitchPortRegisterTable[] = { ++ {MV_PORT_STATUS, "Port Status "}, ++ {MV_SWITCH_ID, "Switch ID "}, ++ {MV_PORT_CONTROL, "Port Control "}, ++ {MV_PORT_BASED_VLAN_MAP, "Port-Based VLAN Map "}, ++ {MV_PORT_ASSOCIATION_VECTOR, "Port Association Vector "}, ++ {MV_RX_COUNTER, "RX Counter "}, ++ {MV_TX_COUNTER, "TX Counter "}, ++}; ++int mvSwitchPortNumRegs = ++ sizeof(mvSwitchPortRegisterTable) / sizeof(mvSwitchPortRegisterTable[0]); ++ ++ ++mvRegisterTableEntry_t mvSwitchGlobalRegisterTable[] = { ++ {MV_SWITCH_GLOBAL_STATUS, "Switch Global Status "}, ++ {MV_SWITCH_MAC_ADDR0, "Switch MAC Addr 0 & 1 "}, ++ {MV_SWITCH_MAC_ADDR2, "Switch MAC Addr 2 & 3 "}, ++ {MV_SWITCH_MAC_ADDR4, "Switch MAC Addr 4 & 5 "}, ++ {MV_SWITCH_GLOBAL_CONTROL, "Switch Global Control "}, ++ {MV_ATU_CONTROL, "ATU Control "}, ++ {MV_ATU_OPERATION, "ATU Operation "}, ++ {MV_ATU_DATA, "ATU Data "}, ++ {MV_ATU_MAC_ADDR0, "ATU MAC Addr 0 & 1 "}, ++ {MV_ATU_MAC_ADDR2, "ATU MAC Addr 2 & 3 "}, ++ {MV_ATU_MAC_ADDR4, "ATU MAC Addr 4 & 5 "}, ++}; ++int mvSwitchGlobalNumRegs = ++ sizeof(mvSwitchGlobalRegisterTable) / sizeof(mvSwitchGlobalRegisterTable[0]); ++ ++void my_mvPhyShow(int ethUnit) ++{ ++ int phyUnit; ++ for (phyUnit=0; (phyUnit < MV_PHY_MAX); phyUnit++) { ++ if (!MV_IS_ETHUNIT(phyUnit, ethUnit)) { ++ continue; ++ } ++ mv_phyShow(phyUnit); ++ } ++} ++ ++/***************************************************************************** ++* ++* mv_phyShow - Dump the state of a PHY. ++* There are two sets of registers for each phy port: ++* "phy registers" and ++* "switch port registers" ++* We dump 'em all, plus the switch global registers. ++*/ ++void ++mv_phyShow(int phyUnit) ++{ ++ int i; ++ UINT16 value; ++ UINT32 phyBase; ++ UINT32 phyAddr; ++ UINT32 switchPortAddr; ++ ++ if (!mv_validPhyId(phyUnit)) { ++ return; ++ } ++ ++ phyBase = MV_PHYBASE(phyUnit); ++ phyAddr = MV_PHYADDR(phyUnit); ++ switchPortAddr = MV_SWITCH_PORT_ADDR(phyUnit); ++ ++ printk("PHY state for PHY%d (ethmac%d, phyBase 0x%8x, phyAddr 0x%x, switchAddr 0x%x)\n", ++ phyUnit, ++ MV_ETHUNIT(phyUnit), ++ MV_PHYBASE(phyUnit), ++ MV_PHYADDR(phyUnit), ++ MV_SWITCH_PORT_ADDR(phyUnit)); ++ ++ printk("PHY Registers:\n"); ++ for (i=0; i < mvPhyNumRegs; i++) { ++ ++ value = phyRegRead(phyBase, phyAddr, mvPhyRegisterTable[i].regNum); ++ ++ printk("Reg %02d (0x%02x) %s = 0x%08x\n", ++ mvPhyRegisterTable[i].regNum, ++ mvPhyRegisterTable[i].regNum, ++ mvPhyRegisterTable[i].regIdString, ++ value); ++ } ++ ++ printk("Switch Port Registers:\n"); ++ for (i=0; i < mvSwitchPortNumRegs; i++) { ++ ++ value = phyRegRead(phyBase, switchPortAddr, ++ mvSwitchPortRegisterTable[i].regNum); ++ ++ printk("Reg %02d (0x%02x) %s = 0x%08x\n", ++ mvSwitchPortRegisterTable[i].regNum, ++ mvSwitchPortRegisterTable[i].regNum, ++ mvSwitchPortRegisterTable[i].regIdString, ++ value); ++ } ++ ++ printk("Switch Global Registers:\n"); ++ for (i=0; i < mvSwitchGlobalNumRegs; i++) { ++ ++ value = phyRegRead(phyBase, MV_SWITCH_GLOBAL_ADDR, ++ mvSwitchGlobalRegisterTable[i].regNum); ++ ++ printk("Reg %02d (0x%02x) %s = 0x%08x\n", ++ mvSwitchGlobalRegisterTable[i].regNum, ++ mvSwitchGlobalRegisterTable[i].regNum, ++ mvSwitchGlobalRegisterTable[i].regIdString, ++ value); ++ } ++} ++ ++/***************************************************************************** ++* ++* mv_phySet - Modify the value of a PHY register (debug only). ++*/ ++void ++mv_phySet(int phyUnit, UINT32 regnum, UINT32 value) ++{ ++ UINT32 phyBase; ++ UINT32 phyAddr; ++ ++ if (mv_validPhyId(phyUnit)) { ++ ++ phyBase = MV_PHYBASE(phyUnit); ++ phyAddr = MV_PHYADDR(phyUnit); ++ ++ phyRegWrite(phyBase, phyAddr, regnum, value); ++ } ++} ++ ++ ++/***************************************************************************** ++* ++* mv_switchPortSet - Modify the value of a switch port register (debug only). ++*/ ++void ++mv_switchPortSet(int phyUnit, UINT32 regnum, UINT32 value) ++{ ++ UINT32 phyBase; ++ UINT32 switchPortAddr; ++ ++ if (mv_validPhyId(phyUnit)) { ++ ++ phyBase = MV_PHYBASE(phyUnit); ++ switchPortAddr = MV_SWITCH_PORT_ADDR(phyUnit); ++ ++ phyRegWrite(phyBase, switchPortAddr, regnum, value); ++ } ++} ++ ++/***************************************************************************** ++* ++* mv_switchGlobalSet - Modify the value of a switch global register ++* (debug only). ++*/ ++void ++mv_switchGlobalSet(int phyUnit, UINT32 regnum, UINT32 value) ++{ ++ UINT32 phyBase; ++ ++ if (mv_validPhyId(phyUnit)) { ++ ++ phyBase = MV_PHYBASE(phyUnit); ++ ++ phyRegWrite(phyBase, MV_SWITCH_GLOBAL_ADDR, regnum, value); ++ } ++} ++ ++/***************************************************************************** ++* ++* mv_showATUDB - Dump the contents of the Address Translation Unit DataBase ++* for the PHY switch associated with the specified phy. ++*/ ++void ++mv_showATUDB(int phyUnit) ++{ ++ UINT32 phyBase; ++ UINT16 ATUData; ++ UINT16 ATUMac0; ++ UINT16 ATUMac2; ++ UINT16 ATUMac4; ++ int portVec; ++ int entryState; ++ ++ if (!mv_validPhyId(phyUnit)) { ++ printk("Invalid port number: %d\n", phyUnit); ++ return; ++ } ++ ++ phyBase = MV_PHYBASE(phyUnit); ++ ++ /* Wait for previous operation (if any) to complete */ ++ mv_waitWhileATUBusy(phyBase); ++ ++ /* Initialize ATU MAC to all 1's */ ++ phyRegWrite(phyBase, MV_SWITCH_GLOBAL_ADDR, MV_ATU_MAC_ADDR0, 0xffff); ++ phyRegWrite(phyBase, MV_SWITCH_GLOBAL_ADDR, MV_ATU_MAC_ADDR2, 0xffff); ++ phyRegWrite(phyBase, MV_SWITCH_GLOBAL_ADDR, MV_ATU_MAC_ADDR4, 0xffff); ++ ++ printk(" MAC ADDRESS EntryState PortVector\n"); ++ ++ for(;;) { ++ /* Tell hardware to get next MAC info */ ++ phyRegWrite(phyBase, MV_SWITCH_GLOBAL_ADDR, MV_ATU_OPERATION, ++ MV_ATU_OP_GET_NEXT | MV_ATU_IS_BUSY); ++ ++ mv_waitWhileATUBusy(phyBase); ++ ++ ATUData = phyRegRead(phyBase, MV_SWITCH_GLOBAL_ADDR, MV_ATU_DATA); ++ entryState = (ATUData & MV_ENTRYSTATE_MASK) >> MV_ENTRYSTATE_SHIFT; ++ ++ if (entryState == 0) { ++ /* We've hit the end of the list */ ++ break; ++ } ++ ++ ATUMac0 = phyRegRead(phyBase, MV_SWITCH_GLOBAL_ADDR, MV_ATU_MAC_ADDR0); ++ ATUMac2 = phyRegRead(phyBase, MV_SWITCH_GLOBAL_ADDR, MV_ATU_MAC_ADDR2); ++ ATUMac4 = phyRegRead(phyBase, MV_SWITCH_GLOBAL_ADDR, MV_ATU_MAC_ADDR4); ++ ++ portVec = (ATUData & MV_PORTVEC_MASK) >> MV_PORTVEC_SHIFT; ++ ++ printk("%02x:%02x:%02x:%02x:%02x:%02x 0x%02x 0x%02x\n", ++ ATUMac0 >> 8, /* MAC byte 0 */ ++ ATUMac0 & 0xff, /* MAC byte 1 */ ++ ATUMac2 >> 8, /* MAC byte 2 */ ++ ATUMac2 & 0xff, /* MAC byte 3 */ ++ ATUMac4 >> 8, /* MAC byte 4 */ ++ ATUMac4 & 0xff, /* MAC byte 5 */ ++ entryState, ++ portVec); ++ } ++} ++ ++LOCAL BOOL countingGoodFrames; ++ ++/***************************************************************************** ++* ++* mv_countGoodFrames - starts counting GOOD RX/TX frames per port ++*/ ++void ++mv_countGoodFrames(int phyUnit) ++{ ++ UINT32 phyBase; ++ UINT16 globalControl; ++ ++ if (mv_validPhyId(phyUnit)) { ++ /* ++ * Guarantee that counters are cleared by ++ * forcing CtrMode to toggle and end on GOODFRAMES. ++ */ ++ ++ phyBase = MV_PHYBASE(phyUnit); ++ ++ /* Read current Switch Global Control Register */ ++ globalControl = phyRegRead(phyBase, MV_SWITCH_GLOBAL_ADDR, ++ MV_SWITCH_GLOBAL_CONTROL); ++ ++ /* Set CtrMode to count BAD frames */ ++ globalControl = ((globalControl & ~MV_CTRMODE_MASK) | ++ MV_CTRMODE_BADFRAMES); ++ ++ /* Push new value out to hardware */ ++ phyRegWrite(phyBase, MV_SWITCH_GLOBAL_ADDR, ++ MV_SWITCH_GLOBAL_CONTROL, globalControl); ++ ++ /* Now toggle CtrMode to count GOOD frames */ ++ globalControl = ((globalControl & ~MV_CTRMODE_MASK) | ++ MV_CTRMODE_GOODFRAMES); ++ ++ /* Push new value out to hardware */ ++ phyRegWrite(phyBase, MV_SWITCH_GLOBAL_ADDR, ++ MV_SWITCH_GLOBAL_CONTROL, globalControl); ++ ++ countingGoodFrames = TRUE; ++ } ++} ++ ++/***************************************************************************** ++* ++* mv_countBadFrames - starts counting BAD RX/TX frames per port ++*/ ++void ++mv_countBadFrames(int phyUnit) ++{ ++ UINT32 phyBase; ++ UINT16 globalControl; ++ ++ if (mv_validPhyId(phyUnit)) { ++ /* ++ * Guarantee that counters are cleared by ++ * forcing CtrMode to toggle and end on BADFRAMES. ++ */ ++ ++ phyBase = MV_PHYBASE(phyUnit); ++ ++ /* Read current Switch Global Control Register */ ++ globalControl = phyRegRead(phyBase, MV_SWITCH_GLOBAL_ADDR, ++ MV_SWITCH_GLOBAL_CONTROL); ++ ++ /* Set CtrMode to count GOOD frames */ ++ globalControl = ((globalControl & ~MV_CTRMODE_MASK) | ++ MV_CTRMODE_GOODFRAMES); ++ ++ /* Push new value out to hardware */ ++ phyRegWrite(phyBase, MV_SWITCH_GLOBAL_ADDR, ++ MV_SWITCH_GLOBAL_CONTROL, globalControl); ++ ++ /* Now toggle CtrMode to count BAD frames */ ++ globalControl = ((globalControl & ~MV_CTRMODE_MASK) | ++ MV_CTRMODE_BADFRAMES); ++ ++ /* Push new value out to hardware */ ++ phyRegWrite(phyBase, MV_SWITCH_GLOBAL_ADDR, ++ MV_SWITCH_GLOBAL_CONTROL, globalControl); ++ ++ countingGoodFrames = FALSE; ++ } ++} ++ ++/***************************************************************************** ++* ++* mv_showFrameCounts - shows current GOOD/BAD Frame counts ++*/ ++void ++mv_showFrameCounts(int phyUnit) ++{ ++ UINT16 rxCounter; ++ UINT16 txCounter; ++ UINT32 phyBase; ++ UINT32 switchPortAddr; ++ ++ if (!mv_validPhyId(phyUnit)) { ++ return; ++ } ++ ++ phyBase = MV_PHYBASE(phyUnit); ++ switchPortAddr = MV_SWITCH_PORT_ADDR(phyUnit); ++ ++ rxCounter = phyRegRead(phyBase, switchPortAddr, MV_RX_COUNTER); ++ ++ txCounter = phyRegRead(phyBase, switchPortAddr, MV_TX_COUNTER); ++ ++ printk("port%d %s frames: receive: %05d transmit: %05d\n", ++ phyUnit, ++ (countingGoodFrames ? "good" : "error"), ++ rxCounter, ++ txCounter); ++} ++#endif +diff -urN linux-mips-orig/drivers/net/ath/mvPhy.h linux-mips-new/drivers/net/ath/mvPhy.h +--- linux-mips-orig/drivers/net/ath/mvPhy.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-mips-new/drivers/net/ath/mvPhy.h 2005-12-31 12:33:57.727530616 +0000 +@@ -0,0 +1,162 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved. ++ */ ++ ++/* ++ * mvPhy.h - definitions for the ethernet PHY -- Marvell 88E6060 ++ * All definitions in this file are operating system independent! ++ */ ++ ++#ifndef MVPHY_H ++#define MVPHY_H ++ ++/*****************/ ++/* PHY Registers */ ++/*****************/ ++#define MV_PHY_CONTROL 0 ++#define MV_PHY_STATUS 1 ++#define MV_PHY_ID1 2 ++#define MV_PHY_ID2 3 ++#define MV_AUTONEG_ADVERT 4 ++#define MV_LINK_PARTNER_ABILITY 5 ++#define MV_AUTONEG_EXPANSION 6 ++#define MV_NEXT_PAGE_TRANSMIT 7 ++#define MV_LINK_PARTNER_NEXT_PAGE 8 ++#define MV_PHY_SPECIFIC_CONTROL_1 16 ++#define MV_PHY_SPECIFIC_STATUS 17 ++#define MV_PHY_INTERRUPT_ENABLE 18 ++#define MV_PHY_INTERRUPT_STATUS 19 ++#define MV_PHY_INTERRUPT_PORT_SUMMARY 20 ++#define MV_RECEIVE_ERROR_COUNTER 21 ++#define MV_LED_PARALLEL_SELECT 22 ++#define MV_LED_STREAM_SELECT_LEDS 23 ++#define MV_PHY_LED_CONTROL 24 ++#define MV_PHY_MANUAL_LED_OVERRIDE 25 ++ ++#define MV_VCT_CONTROL 26 ++#define MV_VCT_STATUS 27 ++#define MV_PHY_SPECIFIC_CONTROL_2 28 ++ ++/* MV_PHY_CONTROL fields */ ++#define MV_CTRL_SOFTWARE_RESET 0x8000 ++#define MV_CTRL_AUTONEGOTIATION_ENABLE 0x1000 ++#define MV_CTRL_FULL_DUPLEX 0x0100 ++#define MV_CTRL_100_MBPS 0x2000 ++ ++/* MV_PHY_ID1 fields */ ++#define MV_PHY_ID1_EXPECTATION 0x0141 /* OUI >> 6 */ ++ ++/* MV_PHY_ID2 fields */ ++#define MV_OUI_LSB_MASK 0xfc00 ++#define MV_OUI_LSB_EXPECTATION 0x0c00 ++#define MV_OUI_LSB_SHIFT 10 ++#define MV_MODEL_NUM_MASK 0x03f0 ++#define MV_MODEL_NUM_SHIFT 4 ++#define MV_REV_NUM_MASK 0x000f ++#define MV_REV_NUM_SHIFT 0 ++ ++/* MV_PHY_SPECIFIC_STATUS fields */ ++#define MV_STATUS_RESOLVED_SPEED_100 0x4000 ++#define MV_STATUS_RESOLVED_DUPLEX_FULL 0x2000 ++#define MV_STATUS_RESOLVED 0x0800 ++#define MV_STATUS_REAL_TIME_LINK_UP 0x0400 ++ ++/* Check if autonegotiation is complete and link is up */ ++#define MV_AUTONEG_DONE(mv_phy_specific_status) \ ++ (((mv_phy_specific_status) & \ ++ (MV_STATUS_RESOLVED | MV_STATUS_REAL_TIME_LINK_UP)) == \ ++ (MV_STATUS_RESOLVED | MV_STATUS_REAL_TIME_LINK_UP)) ++ ++ ++/*************************/ ++/* Switch Port Registers */ ++/*************************/ ++#define MV_PORT_STATUS 0 ++#define MV_SWITCH_ID 3 ++#define MV_PORT_CONTROL 4 ++#define MV_PORT_BASED_VLAN_MAP 6 ++#define MV_PORT_ASSOCIATION_VECTOR 11 ++#define MV_RX_COUNTER 16 ++#define MV_TX_COUNTER 17 ++ ++/* MV_SWITCH_ID fields */ ++#define MV_SWITCH_ID_DEV_MASK 0xfff0 ++#define MV_SWITCH_ID_DEV_EXPECTATION 0x0600 ++#define MV_SWITCH_ID_DEV_SHIFT 4 ++#define MV_SWITCH_ID_REV_MASK 0x000f ++#define MV_SWITCH_ID_REV_SHIFT 0 ++ ++/* MV_PORT_CONTROL fields */ ++#define MV_PORT_CONTROL_PORT_STATE_MASK 0x0003 ++#define MV_PORT_CONTROL_PORT_STATE_DISABLED 0x0000 ++#define MV_PORT_CONTROL_PORT_STATE_FORWARDING 0x0003 ++ ++#define MV_PORT_CONTROL_EGRESS_MODE 0x0100 /* Receive */ ++#define MV_PORT_CONTROL_INGRESS_TRAILER 0x4000 /* Transmit */ ++ ++#define MV_EGRESS_TRAILER_VALID 0x80 ++#define MV_INGRESS_TRAILER_OVERRIDE 0x80 ++ ++#define MV_PHY_TRAILER_SIZE 4 ++ ++ ++/***************************/ ++/* Switch Global Registers */ ++/***************************/ ++#define MV_SWITCH_GLOBAL_STATUS 0 ++#define MV_SWITCH_MAC_ADDR0 1 ++#define MV_SWITCH_MAC_ADDR2 2 ++#define MV_SWITCH_MAC_ADDR4 3 ++#define MV_SWITCH_GLOBAL_CONTROL 4 ++#define MV_ATU_CONTROL 10 ++#define MV_ATU_OPERATION 11 ++#define MV_ATU_DATA 12 ++#define MV_ATU_MAC_ADDR0 13 ++#define MV_ATU_MAC_ADDR2 14 ++#define MV_ATU_MAC_ADDR4 15 ++ ++/* MV_SWITCH_GLOBAL_STATUS fields */ ++#define MV_SWITCH_STATUS_READY_MASK 0x0800 ++ ++/* MV_SWITCH_GLOBAL_CONTROL fields */ ++#define MV_CTRMODE_MASK 0x0100 ++#define MV_CTRMODE_GOODFRAMES 0x0000 ++#define MV_CTRMODE_BADFRAMES 0x0100 ++ ++/* MV_ATU_CONTROL fields */ ++#define MV_ATUCTRL_ATU_SIZE_MASK 0x3000 ++#define MV_ATUCTRL_ATU_SIZE_SHIFT 12 ++#define MV_ATUCTRL_ATU_SIZE_DEFAULT 2 /* 1024 entry database */ ++#define MV_ATUCTRL_AGE_TIME_MASK 0x0ff0 ++#define MV_ATUCTRL_AGE_TIME_SHIFT 4 ++#define MV_ATUCTRL_AGE_TIME_DEFAULT 19 /* 19 * 16 = 304 seconds */ ++ ++/* MV_ATU_OPERATION fields */ ++#define MV_ATU_BUSY_MASK 0x8000 ++#define MV_ATU_IS_BUSY 0x8000 ++#define MV_ATU_IS_FREE 0x0000 ++#define MV_ATU_OP_MASK 0x7000 ++#define MV_ATU_OP_FLUSH_ALL 0x1000 ++#define MV_ATU_OP_GET_NEXT 0x4000 ++ ++/* MV_ATU_DATA fields */ ++#define MV_ENTRYPRI_MASK 0xc000 ++#define MV_ENTRYPRI_SHIFT 14 ++#define MV_PORTVEC_MASK 0x03f0 ++#define MV_PORTVEC_SHIFT 4 ++#define MV_ENTRYSTATE_MASK 0x000f ++#define MV_ENTRYSTATE_SHIFT 0 ++ ++/* PHY Address for the switch itself */ ++#define MV_SWITCH_GLOBAL_ADDR 0x1f ++ ++BOOL mv_phySetup(int ethUnit, UINT32 phyBase); ++void mv_phyCheckStatusChange(int ethUnit); ++BOOL mv_phyIsSpeed100(int ethUnit); ++int mv_phyIsFullDuplex(int ethUnit); ++ ++#endif /* MVPHY_H */ +diff -urN linux-mips-orig/drivers/net/ath/rtPhy.c linux-mips-new/drivers/net/ath/rtPhy.c +--- linux-mips-orig/drivers/net/ath/rtPhy.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-mips-new/drivers/net/ath/rtPhy.c 2005-12-31 12:33:57.727530616 +0000 +@@ -0,0 +1,272 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright © 2003 Atheros Communications, Inc., All Rights Reserved. ++ */ ++ ++/* ++ * Manage the ethernet PHY. ++ * This code supports a simple 1-port ethernet phy, Realtek RTL8201BL, ++ * and compatible PHYs, such as the Kendin KS8721B. ++ * All definitions in this file are operating system independent! ++ */ ++ ++#if defined(linux) ++#include ++#include ++#include ++#include ++#include ++ ++#include "ar531xlnx.h" ++#endif ++ ++#if defined(__ECOS) ++#include "ae531xecos.h" ++#endif ++ ++ ++#include "ae531xmac.h" ++#include "ae531xreg.h" ++#include "rtPhy.h" ++ ++#if /* DEBUG */ 1 ++#define RT_DEBUG_ERROR 0x00000001 ++#define RT_DEBUG_PHYSETUP 0x00000002 ++#define RT_DEBUG_PHYCHANGE 0x00000004 ++ ++int rtPhyDebug = RT_DEBUG_ERROR; ++ ++#define RT_PRINT(FLG, X) \ ++{ \ ++ if (rtPhyDebug & (FLG)) { \ ++ DEBUG_PRINTF X; \ ++ } \ ++} ++#else ++#define RT_PRINT(FLG, X) ++#endif ++ ++/* ++ * Track per-PHY port information. ++ */ ++typedef struct { ++ BOOL phyAlive; /* last known state of link */ ++ UINT32 phyBase; ++ UINT32 phyAddr; ++} rtPhyInfo_t; ++ ++#define ETH_PHY_ADDR 1 ++ ++/* ++ * This table defines the mapping from phy units to ++ * per-PHY information. ++ * ++ * This table is somewhat board-dependent. ++ */ ++rtPhyInfo_t rtPhyInfo[] = { ++ {phyAlive: FALSE, /* PHY 0 */ ++ phyBase: 0, /* filled in by rt_phySetup */ ++ phyAddr: ETH_PHY_ADDR}, ++ ++ {phyAlive: FALSE, /* PHY 1 */ ++ phyBase: 0, /* filled in by rt_phySetup */ ++ phyAddr: ETH_PHY_ADDR} ++}; ++ ++/* Convert from phy unit# to (phyBase, phyAddr) pair */ ++#define RT_PHYBASE(phyUnit) (rtPhyInfo[phyUnit].phyBase) ++#define RT_PHYADDR(phyUnit) (rtPhyInfo[phyUnit].phyAddr) ++ ++ ++/****************************************************************************** ++* ++* rt_phySetup - reset and setup the PHY associated with ++* the specified MAC unit number. ++* ++* Resets the associated PHY port. ++* ++* RETURNS: ++* TRUE --> associated PHY is alive ++* FALSE --> no LINKs on this ethernet unit ++*/ ++ ++BOOL ++rt_phySetup(int ethUnit, UINT32 phyBase) ++{ ++ BOOL linkAlive = FALSE; ++ UINT32 phyAddr; ++ ++ RT_PHYBASE(ethUnit) = phyBase; ++ ++ phyAddr = RT_PHYADDR(ethUnit); ++ ++ /* Reset phy */ ++ phyRegWrite(phyBase, phyAddr, GEN_ctl, PHY_SW_RST | AUTONEGENA); ++ ++ sysMsDelay(1500); ++ ++ return linkAlive; ++} ++ ++/****************************************************************************** ++* ++* rt_phyIsDuplexFull - Determines whether the phy ports associated with the ++* specified device are FULL or HALF duplex. ++* ++* RETURNS: ++* 1 --> FULL ++* 0 --> HALF ++*/ ++int ++rt_phyIsFullDuplex(int ethUnit) ++{ ++ UINT16 phyCtl; ++ UINT32 phyBase; ++ UINT32 phyAddr; ++ ++ phyBase = RT_PHYBASE(ethUnit); ++ phyAddr = RT_PHYADDR(ethUnit); ++ ++ phyCtl = phyRegRead(phyBase, phyAddr, GEN_ctl); ++ ++ if (phyCtl & DUPLEX) { ++ return 1; ++ } else { ++ return 0; ++ } ++} ++ ++/****************************************************************************** ++* ++* rt_phyIsSpeed100 - Determines the speed of phy ports associated with the ++* specified device. ++* ++* RETURNS: ++* TRUE --> 100Mbit ++* FALSE --> 10Mbit ++*/ ++BOOL ++rt_phyIsSpeed100(int phyUnit) ++{ ++ UINT16 phyLpa; ++ UINT32 phyBase; ++ UINT32 phyAddr; ++ ++ phyBase = RT_PHYBASE(phyUnit); ++ phyAddr = RT_PHYADDR(phyUnit); ++ ++ phyLpa = phyRegRead(phyBase, phyAddr, AN_lpa); ++ ++ if (phyLpa & (LPA_TXFD | LPA_TX)) { ++ return TRUE; ++ } else { ++ return FALSE; ++ } ++} ++ ++/***************************************************************************** ++* ++* rt_phyCheckStatusChange -- checks for significant changes in PHY state. ++* ++* A "significant change" is: ++* dropped link (e.g. ethernet cable unplugged) OR ++* autonegotiation completed + link (e.g. ethernet cable plugged in) ++* ++* On AR5311, there is a 1-to-1 mapping of ethernet units to PHYs. ++* When a PHY is plugged in, phyLinkGained is called. ++* When a PHY is unplugged, phyLinkLost is called. ++*/ ++void ++rt_phyCheckStatusChange(int ethUnit) ++{ ++ UINT16 phyHwStatus; ++ rtPhyInfo_t *lastStatus = &rtPhyInfo[ethUnit]; ++ UINT32 phyBase; ++ UINT32 phyAddr; ++ ++ phyBase = RT_PHYBASE(ethUnit); ++ phyAddr = RT_PHYADDR(ethUnit); ++ ++ phyHwStatus = phyRegRead(phyBase, phyAddr, GEN_sts); ++ ++ if (lastStatus->phyAlive) { /* last known status was ALIVE */ ++ /* See if we've lost link */ ++ if (!(phyHwStatus & LINK)) { ++ RT_PRINT(RT_DEBUG_PHYCHANGE,("\nethmac%d link down\n", ethUnit)); ++ lastStatus->phyAlive = FALSE; ++ phyLinkLost(ethUnit); ++ } ++ } else { /* last known status was DEAD */ ++ /* Check for AN complete */ ++ if ((phyHwStatus & (AUTOCMPLT | LINK)) == (AUTOCMPLT | LINK)) { ++ RT_PRINT(RT_DEBUG_PHYCHANGE,("\nethmac%d link up\n", ethUnit)); ++ lastStatus->phyAlive = TRUE; ++ phyLinkGained(ethUnit); ++ } ++ } ++} ++ ++#if DEBUG ++ ++/* Define the PHY registers of interest for a phyShow command */ ++struct rtRegisterTable_s { ++ UINT32 regNum; ++ char *regIdString; ++} rtRegisterTable[] = ++{ ++ {GEN_ctl, "Basic Mode Control (GEN_ctl) "}, ++ {GEN_sts, "Basic Mode Status (GEN_sts) "}, ++ {GEN_id_hi, "PHY Identifier 1 (GET_id_hi) "}, ++ {GEN_id_lo, "PHY Identifier 2 (GET_id_lo) "}, ++ {AN_adv, "Auto-Neg Advertisement (AN_adv) "}, ++ {AN_lpa, "Auto-Neg Link Partner Ability "}, ++ {AN_exp, "Auto-Neg Expansion "}, ++}; ++ ++int rtNumRegs = sizeof(rtRegisterTable) / sizeof(rtRegisterTable[0]); ++ ++/* ++ * Dump the state of a PHY. ++ */ ++void ++rt_phyShow(int phyUnit) ++{ ++ int i; ++ UINT16 value; ++ UINT32 phyBase; ++ UINT32 phyAddr; ++ ++ phyBase = RT_PHYBASE(phyUnit); ++ phyAddr = RT_PHYADDR(phyUnit); ++ ++ printf("PHY state for ethphy%d\n", phyUnit); ++ ++ for (i=0; i