X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fsvn-archive%2Farchive.git;a=blobdiff_plain;f=target%2Flinux%2Fadm5120%2Ffiles%2Farch%2Fmips%2Fadm5120%2Finfineon%2Finfineon.c;fp=target%2Flinux%2Fadm5120%2Ffiles%2Farch%2Fmips%2Fadm5120%2Finfineon%2Finfineon.c;h=0000000000000000000000000000000000000000;hp=5c441da90ebcdcd424fab9e5a164c67783c81b45;hb=b44dd7a0361eb8295166161788f0d824a265e955;hpb=e8968a9b93d9ea8600e701ac38fc6f00266876c7

diff --git a/target/linux/adm5120/files/arch/mips/adm5120/infineon/infineon.c b/target/linux/adm5120/files/arch/mips/adm5120/infineon/infineon.c
deleted file mode 100644
index 5c441da90e..0000000000
--- a/target/linux/adm5120/files/arch/mips/adm5120/infineon/infineon.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- *  Infineon Reference Boards
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "infineon.h"
-
-#include <prom/admboot.h>
-
-#define EASY_CONFIG_OFFSET	0x10000
-#define EASY_CONFIG_SIZE	0x1000
-
-static struct mtd_partition easy_partitions[] = {
-	{
-		.name	= "admboot",
-		.offset	= 0,
-		.size	= 64*1024,
-		.mask_flags = MTD_WRITEABLE,
-	} , {
-		.name	= "boardcfg",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= 64*1024,
-	} , {
-		.name	= "firmware",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-static __init void easy_setup_mac(void)
-{
-	u8 mac_base[6];
-	int err;
-
-	err = admboot_get_mac_base(EASY_CONFIG_OFFSET,
-				   EASY_CONFIG_SIZE, mac_base);
-
-	if ((err) || !is_valid_ether_addr(mac_base))
-		random_ether_addr(mac_base);
-
-	adm5120_setup_eth_macs(mac_base);
-}
-
-static void switch_bank_gpio3(unsigned bank)
-{
-	switch (bank) {
-	case 0:
-		gpio_set_value(ADM5120_GPIO_PIN3, 0);
-		break;
-	case 1:
-		gpio_set_value(ADM5120_GPIO_PIN3, 1);
-		break;
-	}
-}
-
-void __init easy_setup_pqfp(void)
-{
-	/* setup flash A20 line */
-	gpio_request(ADM5120_GPIO_PIN3, NULL);
-	gpio_direction_output(ADM5120_GPIO_PIN3, 0);
-	adm5120_flash0_data.switch_bank = switch_bank_gpio3;
-
-	adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions);
-	adm5120_flash0_data.parts = easy_partitions;
-
-	adm5120_add_device_uart(0);
-	adm5120_add_device_uart(1);
-
-	adm5120_add_device_flash(0);
-
-	easy_setup_mac();
-}
-
-static void switch_bank_gpio5(unsigned bank)
-{
-	switch (bank) {
-	case 0:
-		gpio_set_value(ADM5120_GPIO_PIN5, 0);
-		break;
-	case 1:
-		gpio_set_value(ADM5120_GPIO_PIN5, 1);
-		break;
-	}
-}
-
-void __init easy_setup_bga(void)
-{
-	/* setup flash A20 line */
-	gpio_request(ADM5120_GPIO_PIN5, NULL);
-	gpio_direction_output(ADM5120_GPIO_PIN5, 0);
-	adm5120_flash0_data.switch_bank = switch_bank_gpio5;
-
-	adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions);
-	adm5120_flash0_data.parts = easy_partitions;
-
-	adm5120_add_device_uart(0);
-	adm5120_add_device_uart(1);
-
-	adm5120_add_device_flash(0);
-
-	easy_setup_mac();
-}