X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fsvn-archive%2Farchive.git;a=blobdiff_plain;f=target%2Flinux%2Far7%2Fpatches-2.6.32%2F120-gpio_chrdev.patch;fp=target%2Flinux%2Far7%2Fpatches-2.6.32%2F120-gpio_chrdev.patch;h=d648d08c8df4d2786ff8af70a1ab1e84f4c7f4d3;hp=0000000000000000000000000000000000000000;hb=4ac390d76f36c7c4c96bc87f0c0ee3bed10c1d8c;hpb=df34bee08211660688568aa31ca15dc7b692e491

diff --git a/target/linux/ar7/patches-2.6.32/120-gpio_chrdev.patch b/target/linux/ar7/patches-2.6.32/120-gpio_chrdev.patch
new file mode 100644
index 0000000000..d648d08c8d
--- /dev/null
+++ b/target/linux/ar7/patches-2.6.32/120-gpio_chrdev.patch
@@ -0,0 +1,28 @@
+--- a/drivers/char/Kconfig
++++ b/drivers/char/Kconfig
+@@ -987,6 +987,15 @@ config MWAVE
+ 	  To compile this driver as a module, choose M here: the
+ 	  module will be called mwave.
+ 
++config AR7_GPIO
++	tristate "TI AR7 GPIO Support"
++	depends on AR7
++	help
++	  Give userspace access to the GPIO pins on the Texas Instruments AR7 
++	  processors.
++
++	  If compiled as a module, it will be called ar7_gpio.
++
+ config SCx200_GPIO
+ 	tristate "NatSemi SCx200 GPIO Support"
+ 	depends on SCx200
+--- a/drivers/char/Makefile
++++ b/drivers/char/Makefile
+@@ -92,6 +92,7 @@ obj-$(CONFIG_HW_RANDOM)		+= hw_random/
+ obj-$(CONFIG_PPDEV)		+= ppdev.o
+ obj-$(CONFIG_NWBUTTON)		+= nwbutton.o
+ obj-$(CONFIG_NWFLASH)		+= nwflash.o
++obj-$(CONFIG_AR7_GPIO)		+= ar7_gpio.o
+ obj-$(CONFIG_SCx200_GPIO)	+= scx200_gpio.o
+ obj-$(CONFIG_PC8736x_GPIO)	+= pc8736x_gpio.o
+ obj-$(CONFIG_NSC_GPIO)		+= nsc_gpio.o