X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fsvn-archive%2Farchive.git;a=blobdiff_plain;f=target%2Flinux%2Fbrcm63xx%2Fpatches-3.18%2F535-board_rta770w.patch;fp=target%2Flinux%2Fbrcm63xx%2Fpatches-3.18%2F535-board_rta770w.patch;h=0000000000000000000000000000000000000000;hp=06972998c8c0dfa42614ffd1adbf6408fa2f8da5;hb=9fdac9b579e6f5dc989e020990a065599434d134;hpb=9a2c2d63e8159543004a8a757ea97325a75e0bc4

diff --git a/target/linux/brcm63xx/patches-3.18/535-board_rta770w.patch b/target/linux/brcm63xx/patches-3.18/535-board_rta770w.patch
deleted file mode 100644
index 06972998c8..0000000000
--- a/target/linux/brcm63xx/patches-3.18/535-board_rta770w.patch
+++ /dev/null
@@ -1,46 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -545,6 +545,27 @@ static struct board_info __initdata boar
- 		.force_duplex_full	= 1,
- 	},
- };
-+
-+// Actually this board is the very same as the rta770bw,
-+// where the additional 'b' within the name just
-+// just indicates 'Annex B'. The ADSL Modem itself is able
-+// to handle both Annex A as well as Annex B -
-+// the loaded firmware makes the only difference
-+static struct board_info __initdata board_rta770w = {
-+	.name				= "RTA770W",
-+	.expected_cpu_id		= 0x6345,
-+
-+	.has_uart0			= 1,
-+
-+	.has_enet0			= 1,
-+
-+	.enet0 = {
-+		.has_phy		= 1,
-+		.phy_id			= 0,
-+		.force_speed_100	= 1,
-+		.force_duplex_full	= 1,
-+	},
-+};
- #endif /* CONFIG_BCM63XX_CPU_6345 */
- 
- /*
-@@ -1796,6 +1817,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6345
- 	&board_96345gw2,
- 	&board_rta770bw,
-+	&board_rta770w,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6348
- 	&board_96348r,
-@@ -1870,6 +1892,7 @@ static struct of_device_id const bcm963x
- #ifdef CONFIG_BCM63XX_CPU_6345
- 	{ .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, },
- 	{ .compatible = "dynalink,rta770bw", .data = &board_rta770bw, },
-+	{ .compatible = "dynalink,rta770w", .data = &board_rta770w, },
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6348
- 	{ .compatible = "belkin,f5d7633", .data = &board_96348gw_10, },