X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fsvn-archive%2Farchive.git;a=blobdiff_plain;f=target%2Flinux%2Fgeneric%2Ffiles%2Fcrypto%2Focf%2Fkirkwood%2FmvHal%2Fmv_hal%2Ftwsi%2FmvTwsi.c;fp=target%2Flinux%2Fgeneric%2Ffiles%2Fcrypto%2Focf%2Fkirkwood%2FmvHal%2Fmv_hal%2Ftwsi%2FmvTwsi.c;h=0bf8b7571b1e1909e73b16f1a4c8d5c548632b57;hp=0000000000000000000000000000000000000000;hb=c6ab1b23be796c1bbe1915ac566fe3377ae8109f;hpb=01131f5dd9f61be5a5c857152ca079f316fd7538 diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvTwsi.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvTwsi.c new file mode 100644 index 0000000000..0bf8b7571b --- /dev/null +++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvTwsi.c @@ -0,0 +1,1023 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + + +#include "mvTwsi.h" +#include "mvTwsiSpec.h" +#include "cpu/mvCpu.h" + + +/*#define MV_DEBUG*/ +#ifdef MV_DEBUG +#define DB(x) x +#else +#define DB(x) +#endif + +static MV_VOID twsiIntFlgClr(MV_U8 chanNum); +static MV_BOOL twsiMainIntGet(MV_U8 chanNum); +static MV_VOID twsiAckBitSet(MV_U8 chanNum); +static MV_U32 twsiStsGet(MV_U8 chanNum); +static MV_VOID twsiReset(MV_U8 chanNum); +static MV_STATUS twsiAddr7BitSet(MV_U8 chanNum, MV_U32 deviceAddress,MV_TWSI_CMD command); +static MV_STATUS twsiAddr10BitSet(MV_U8 chanNum, MV_U32 deviceAddress,MV_TWSI_CMD command); +static MV_STATUS twsiDataTransmit(MV_U8 chanNum, MV_U8 *pBlock, MV_U32 blockSize); +static MV_STATUS twsiDataReceive(MV_U8 chanNum, MV_U8 *pBlock, MV_U32 blockSize); +static MV_STATUS twsiTargetOffsSet(MV_U8 chanNum, MV_U32 offset,MV_BOOL moreThen256); + + +static MV_BOOL twsiTimeoutChk(MV_U32 timeout, const MV_8 *pString) +{ + if(timeout >= TWSI_TIMEOUT_VALUE) + { + DB(mvOsPrintf("%s",pString)); + return MV_TRUE; + } + return MV_FALSE; + +} +/******************************************************************************* +* mvTwsiStartBitSet - Set start bit on the bus +* +* DESCRIPTION: +* This routine sets the start bit on the TWSI bus. +* The routine first checks for interrupt flag condition, then it sets +* the start bit in the TWSI Control register. +* If the interrupt flag condition check previously was set, the function +* will clear it. +* The function then wait for the start bit to be cleared by the HW. +* Then it waits for the interrupt flag to be set and eventually, the +* TWSI status is checked to be 0x8 or 0x10(repeated start bit). +* +* INPUT: +* chanNum - TWSI channel. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_OK is start bit was set successfuly on the bus. +* MV_FAIL if interrupt flag was set before setting start bit. +* +*******************************************************************************/ +MV_STATUS mvTwsiStartBitSet(MV_U8 chanNum) +{ + MV_BOOL isIntFlag = MV_FALSE; + MV_U32 timeout, temp; + + DB(mvOsPrintf("TWSI: mvTwsiStartBitSet \n")); + /* check Int flag */ + if(twsiMainIntGet(chanNum)) + isIntFlag = MV_TRUE; + /* set start Bit */ + temp = MV_REG_READ(TWSI_CONTROL_REG(chanNum)); + MV_REG_WRITE(TWSI_CONTROL_REG(chanNum), temp | TWSI_CONTROL_START_BIT); + + /* in case that the int flag was set before i.e. repeated start bit */ + if(isIntFlag){ + DB(mvOsPrintf("TWSI: mvTwsiStartBitSet repeated start Bit\n")); + twsiIntFlgClr(chanNum); + } + + /* wait for interrupt */ + timeout = 0; + while(!twsiMainIntGet(chanNum) && (timeout++ < TWSI_TIMEOUT_VALUE)); + + /* check for timeout */ + if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: mvTwsiStartBitSet ERROR - Start Clear bit TimeOut .\n")) + return MV_TIMEOUT; + + + /* check that start bit went down */ + if((MV_REG_READ(TWSI_CONTROL_REG(chanNum)) & TWSI_CONTROL_START_BIT) != 0) + { + mvOsPrintf("TWSI: mvTwsiStartBitSet ERROR - start bit didn't went down\n"); + return MV_FAIL; + } + + /* check the status */ + temp = twsiStsGet(chanNum); + if(( temp != TWSI_START_CON_TRA ) && ( temp != TWSI_REPEATED_START_CON_TRA )) + { + mvOsPrintf("TWSI: mvTwsiStartBitSet ERROR - status %x after Set Start Bit. \n",temp); + return MV_FAIL; + } + + return MV_OK; + +} + +/******************************************************************************* +* mvTwsiStopBitSet - Set stop bit on the bus +* +* DESCRIPTION: +* This routine set the stop bit on the TWSI bus. +* The function then wait for the stop bit to be cleared by the HW. +* Finally the function checks for status of 0xF8. +* +* INPUT: +* chanNum - TWSI channel +* +* OUTPUT: +* None. +* +* RETURN: +* MV_TRUE is stop bit was set successfuly on the bus. +* +*******************************************************************************/ +MV_STATUS mvTwsiStopBitSet(MV_U8 chanNum) +{ + MV_U32 timeout, temp; + + /* Generate stop bit */ + temp = MV_REG_READ(TWSI_CONTROL_REG(chanNum)); + MV_REG_WRITE(TWSI_CONTROL_REG(chanNum), temp | TWSI_CONTROL_STOP_BIT); + + twsiIntFlgClr(chanNum); + + /* wait for stop bit to come down */ + timeout = 0; + while( ((MV_REG_READ(TWSI_CONTROL_REG(chanNum)) & TWSI_CONTROL_STOP_BIT) != 0) && (timeout++ < TWSI_TIMEOUT_VALUE)); + + /* check for timeout */ + if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: mvTwsiStopBitSet ERROR - Stop bit TimeOut .\n")) + return MV_TIMEOUT; + + /* check that the stop bit went down */ + if((MV_REG_READ(TWSI_CONTROL_REG(chanNum)) & TWSI_CONTROL_STOP_BIT) != 0) + { + mvOsPrintf("TWSI: mvTwsiStopBitSet ERROR - stop bit didn't went down. \n"); + return MV_FAIL; + } + + /* check the status */ + temp = twsiStsGet(chanNum); + if( temp != TWSI_NO_REL_STS_INT_FLAG_IS_KEPT_0){ + mvOsPrintf("TWSI: mvTwsiStopBitSet ERROR - status %x after Stop Bit. \n", temp); + return MV_FAIL; + } + + return MV_OK; +} + +/******************************************************************************* +* twsiMainIntGet - Get twsi bit from main Interrupt cause. +* +* DESCRIPTION: +* This routine returns the twsi interrupt flag value. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_TRUE is interrupt flag is set, MV_FALSE otherwise. +* +*******************************************************************************/ +static MV_BOOL twsiMainIntGet(MV_U8 chanNum) +{ + MV_U32 temp; + + /* get the int flag bit */ + + temp = MV_REG_READ(TWSI_CPU_MAIN_INT_CAUSE_REG); + if (temp & (TWSI0_CPU_MAIN_INT_BIT << chanNum)) + return MV_TRUE; + + return MV_FALSE; +} +/******************************************************************************* +* twsiIntFlgClr - Clear Interrupt flag. +* +* DESCRIPTION: +* This routine clears the interrupt flag. It does NOT poll the interrupt +* to make sure the clear. After clearing the interrupt, it waits for at +* least 1 miliseconds. +* +* INPUT: +* chanNum - TWSI channel +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ +static MV_VOID twsiIntFlgClr(MV_U8 chanNum) +{ + MV_U32 temp; + + /* wait for 1 mili to prevent TWSI register write after write problems */ + mvOsDelay(1); + /* clear the int flag bit */ + temp = MV_REG_READ(TWSI_CONTROL_REG(chanNum)); + MV_REG_WRITE(TWSI_CONTROL_REG(chanNum),temp & ~(TWSI_CONTROL_INT_FLAG_SET)); + + /* wait for 1 mili sec for the clear to take effect */ + mvOsDelay(1); + + return; +} + + +/******************************************************************************* +* twsiAckBitSet - Set acknowledge bit on the bus +* +* DESCRIPTION: +* This routine set the acknowledge bit on the TWSI bus. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ +static MV_VOID twsiAckBitSet(MV_U8 chanNum) +{ + MV_U32 temp; + + /*Set the Ack bit */ + temp = MV_REG_READ(TWSI_CONTROL_REG(chanNum)); + MV_REG_WRITE(TWSI_CONTROL_REG(chanNum), temp | TWSI_CONTROL_ACK); + + /* Add delay of 1ms */ + mvOsDelay(1); + return; +} + + +/******************************************************************************* +* twsiInit - Initialize TWSI interface +* +* DESCRIPTION: +* This routine: +* -Reset the TWSI. +* -Initialize the TWSI clock baud rate according to given frequancy +* parameter based on Tclk frequancy and enables TWSI slave. +* -Set the ack bit. +* -Assign the TWSI slave address according to the TWSI address Type. +* +* +* INPUT: +* chanNum - TWSI channel +* frequancy - TWSI frequancy in KHz. (up to 100KHZ) +* +* OUTPUT: +* None. +* +* RETURN: +* Actual frequancy. +* +*******************************************************************************/ +MV_U32 mvTwsiInit(MV_U8 chanNum, MV_HZ frequancy, MV_U32 Tclk, MV_TWSI_ADDR *pTwsiAddr, MV_BOOL generalCallEnable) +{ + MV_U32 n,m,freq,margin,minMargin = 0xffffffff; + MV_U32 power; + MV_U32 actualFreq = 0,actualN = 0,actualM = 0,val; + + if(frequancy > 100000) + { + mvOsPrintf("Warning TWSI frequancy is too high, please use up tp 100Khz. \n"); + } + + DB(mvOsPrintf("TWSI: mvTwsiInit - Tclk = %d freq = %d\n",Tclk,frequancy)); + /* Calucalte N and M for the TWSI clock baud rate */ + for(n = 0 ; n < 8 ; n++) + { + for(m = 0 ; m < 16 ; m++) + { + power = 2 << n; /* power = 2^(n+1) */ + freq = Tclk/(10*(m+1)*power); + margin = MV_ABS(frequancy - freq); + if(margin < minMargin) + { + minMargin = margin; + actualFreq = freq; + actualN = n; + actualM = m; + } + } + } + DB(mvOsPrintf("TWSI: mvTwsiInit - actN %d actM %d actFreq %d\n",actualN , actualM, actualFreq)); + /* Reset the TWSI logic */ + twsiReset(chanNum); + + /* Set the baud rate */ + val = ((actualM<< TWSI_BAUD_RATE_M_OFFS) | actualN << TWSI_BAUD_RATE_N_OFFS); + MV_REG_WRITE(TWSI_STATUS_BAUDE_RATE_REG(chanNum),val); + + /* Enable the TWSI and slave */ + MV_REG_WRITE(TWSI_CONTROL_REG(chanNum), TWSI_CONTROL_ENA | TWSI_CONTROL_ACK); + + /* set the TWSI slave address */ + if( pTwsiAddr->type == ADDR10_BIT )/* 10 Bit deviceAddress */ + { + /* writing the 2 most significant bits of the 10 bit address*/ + val = ((pTwsiAddr->address & TWSI_SLAVE_ADDR_10BIT_MASK) >> TWSI_SLAVE_ADDR_10BIT_OFFS ); + /* bits 7:3 must be 0x11110 */ + val |= TWSI_SLAVE_ADDR_10BIT_CONST; + /* set GCE bit */ + if(generalCallEnable) + val |= TWSI_SLAVE_ADDR_GCE_ENA; + /* write slave address */ + MV_REG_WRITE(TWSI_SLAVE_ADDR_REG(chanNum),val); + + /* writing the 8 least significant bits of the 10 bit address*/ + val = (pTwsiAddr->address << TWSI_EXTENDED_SLAVE_OFFS) & TWSI_EXTENDED_SLAVE_MASK; + MV_REG_WRITE(TWSI_EXTENDED_SLAVE_ADDR_REG(chanNum), val); + } + else /*7 bit address*/ + { + /* set the 7 Bits address */ + MV_REG_WRITE(TWSI_EXTENDED_SLAVE_ADDR_REG(chanNum),0x0); + val = (pTwsiAddr->address << TWSI_SLAVE_ADDR_7BIT_OFFS) & TWSI_SLAVE_ADDR_7BIT_MASK; + MV_REG_WRITE(TWSI_SLAVE_ADDR_REG(chanNum), val); + } + + /* unmask twsi int */ + val = MV_REG_READ(TWSI_CONTROL_REG(chanNum)); + MV_REG_WRITE(TWSI_CONTROL_REG(chanNum), val | TWSI_CONTROL_INT_ENA); + /* Add delay of 1ms */ + mvOsDelay(1); + + return actualFreq; +} + + +/******************************************************************************* +* twsiStsGet - Get the TWSI status value. +* +* DESCRIPTION: +* This routine returns the TWSI status value. +* +* INPUT: +* chanNum - TWSI channel +* +* OUTPUT: +* None. +* +* RETURN: +* MV_U32 - the TWSI status. +* +*******************************************************************************/ +static MV_U32 twsiStsGet(MV_U8 chanNum) +{ + return MV_REG_READ(TWSI_STATUS_BAUDE_RATE_REG(chanNum)); + +} + +/******************************************************************************* +* twsiReset - Reset the TWSI. +* +* DESCRIPTION: +* Resets the TWSI logic and sets all TWSI registers to their reset values. +* +* INPUT: +* chanNum - TWSI channel +* +* OUTPUT: +* None. +* +* RETURN: +* None +* +*******************************************************************************/ +static MV_VOID twsiReset(MV_U8 chanNum) +{ + /* Reset the TWSI logic */ + MV_REG_WRITE(TWSI_SOFT_RESET_REG(chanNum),0); + + /* wait for 2 mili sec */ + mvOsDelay(2); + + return; +} + + + + +/******************************* POLICY ****************************************/ + + + +/******************************************************************************* +* mvTwsiAddrSet - Set address on TWSI bus. +* +* DESCRIPTION: +* This function Set address (7 or 10 Bit address) on the Twsi Bus. +* +* INPUT: +* chanNum - TWSI channel +* pTwsiAddr - twsi address. +* command - read / write . +* +* OUTPUT: +* None. +* +* RETURN: +* MV_OK - if setting the address completed succesfully. +* MV_FAIL otherwmise. +* +*******************************************************************************/ +MV_STATUS mvTwsiAddrSet(MV_U8 chanNum, MV_TWSI_ADDR *pTwsiAddr, MV_TWSI_CMD command) +{ + DB(mvOsPrintf("TWSI: mvTwsiAddr7BitSet addr %x , type %d, cmd is %s\n",pTwsiAddr->address,\ + pTwsiAddr->type, ((command==MV_TWSI_WRITE)?"Write":"Read") )); + /* 10 Bit address */ + if(pTwsiAddr->type == ADDR10_BIT) + { + return twsiAddr10BitSet(chanNum, pTwsiAddr->address,command); + } + /* 7 Bit address */ + else + { + return twsiAddr7BitSet(chanNum, pTwsiAddr->address,command); + } + +} + +/******************************************************************************* +* twsiAddr10BitSet - Set 10 Bit address on TWSI bus. +* +* DESCRIPTION: +* There are two address phases: +* 1) Write '11110' to data register bits [7:3] and 10-bit address MSB +* (bits [9:8]) to data register bits [2:1] plus a write(0) or read(1) bit +* to the Data register. Then it clears interrupt flag which drive +* the address on the TWSI bus. The function then waits for interrupt +* flag to be active and status 0x18 (write) or 0x40 (read) to be set. +* 2) write the rest of 10-bit address to data register and clears +* interrupt flag which drive the address on the TWSI bus. The +* function then waits for interrupt flag to be active and status +* 0xD0 (write) or 0xE0 (read) to be set. +* +* INPUT: +* chanNum - TWSI channel +* deviceAddress - twsi address. +* command - read / write . +* +* OUTPUT: +* None. +* +* RETURN: +* MV_OK - if setting the address completed succesfully. +* MV_FAIL otherwmise. +* +*******************************************************************************/ +static MV_STATUS twsiAddr10BitSet(MV_U8 chanNum, MV_U32 deviceAddress,MV_TWSI_CMD command) +{ + MV_U32 val,timeout; + + /* writing the 2 most significant bits of the 10 bit address*/ + val = ((deviceAddress & TWSI_DATA_ADDR_10BIT_MASK) >> TWSI_DATA_ADDR_10BIT_OFFS ); + /* bits 7:3 must be 0x11110 */ + val |= TWSI_DATA_ADDR_10BIT_CONST; + /* set command */ + val |= command; + MV_REG_WRITE(TWSI_DATA_REG(chanNum), val); + /* WA add a delay */ + mvOsDelay(1); + + /* clear Int flag */ + twsiIntFlgClr(chanNum); + + /* wait for Int to be Set */ + timeout = 0; + while( !twsiMainIntGet(chanNum) && (timeout++ < TWSI_TIMEOUT_VALUE)); + + /* check for timeout */ + if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: twsiAddr10BitSet ERROR - 1st addr (10Bit) Int TimeOut.\n")) + return MV_TIMEOUT; + + /* check the status */ + val = twsiStsGet(chanNum); + if(( (val != TWSI_AD_PLS_RD_BIT_TRA_ACK_REC) && (command == MV_TWSI_READ ) ) || + ( (val != TWSI_AD_PLS_WR_BIT_TRA_ACK_REC) && (command == MV_TWSI_WRITE) )) + { + mvOsPrintf("TWSI: twsiAddr10BitSet ERROR - status %x 1st addr (10 Bit) in %s mode.\n"\ + ,val, ((command==MV_TWSI_WRITE)?"Write":"Read") ); + return MV_FAIL; + } + + /* set 8 LSB of the address */ + val = (deviceAddress << TWSI_DATA_ADDR_7BIT_OFFS) & TWSI_DATA_ADDR_7BIT_MASK; + MV_REG_WRITE(TWSI_DATA_REG(chanNum), val); + + /* clear Int flag */ + twsiIntFlgClr(chanNum); + + /* wait for Int to be Set */ + timeout = 0; + while( !twsiMainIntGet(chanNum) && (timeout++ < TWSI_TIMEOUT_VALUE)); + + /* check for timeout */ + if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: twsiAddr10BitSet ERROR - 2nd (10 Bit) Int TimOut.\n")) + return MV_TIMEOUT; + + /* check the status */ + val = twsiStsGet(chanNum); + if(( (val != TWSI_SEC_AD_PLS_RD_BIT_TRA_ACK_REC) && (command == MV_TWSI_READ ) ) || + ( (val != TWSI_SEC_AD_PLS_WR_BIT_TRA_ACK_REC) && (command == MV_TWSI_WRITE) )) + { + mvOsPrintf("TWSI: twsiAddr10BitSet ERROR - status %x 2nd addr(10 Bit) in %s mode.\n"\ + ,val, ((command==MV_TWSI_WRITE)?"Write":"Read") ); + return MV_FAIL; + } + + return MV_OK; +} + +/******************************************************************************* +* twsiAddr7BitSet - Set 7 Bit address on TWSI bus. +* +* DESCRIPTION: +* This function writes 7 bit address plus a write or read bit to the +* Data register. Then it clears interrupt flag which drive the address on +* the TWSI bus. The function then waits for interrupt flag to be active +* and status 0x18 (write) or 0x40 (read) to be set. +* +* INPUT: +* chanNum - TWSI channel +* deviceAddress - twsi address. +* command - read / write . +* +* OUTPUT: +* None. +* +* RETURN: +* MV_OK - if setting the address completed succesfully. +* MV_FAIL otherwmise. +* +*******************************************************************************/ +static MV_STATUS twsiAddr7BitSet(MV_U8 chanNum, MV_U32 deviceAddress,MV_TWSI_CMD command) +{ + MV_U32 val,timeout; + + /* set the address */ + val = (deviceAddress << TWSI_DATA_ADDR_7BIT_OFFS) & TWSI_DATA_ADDR_7BIT_MASK; + /* set command */ + val |= command; + MV_REG_WRITE(TWSI_DATA_REG(chanNum), val); + /* WA add a delay */ + mvOsDelay(1); + + /* clear Int flag */ + twsiIntFlgClr(chanNum); + + /* wait for Int to be Set */ + timeout = 0; + while( !twsiMainIntGet(chanNum) && (timeout++ < TWSI_TIMEOUT_VALUE)); + + /* check for timeout */ + if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: twsiAddr7BitSet ERROR - Addr (7 Bit) int TimeOut.\n")) + return MV_TIMEOUT; + + /* check the status */ + val = twsiStsGet(chanNum); + if(( (val != TWSI_AD_PLS_RD_BIT_TRA_ACK_REC) && (command == MV_TWSI_READ ) ) || + ( (val != TWSI_AD_PLS_WR_BIT_TRA_ACK_REC) && (command == MV_TWSI_WRITE) )) + { + /* only in debug, since in boot we try to read the SPD of both DRAM, and we don't + want error messeges in case DIMM doesn't exist. */ + DB(mvOsPrintf("TWSI: twsiAddr7BitSet ERROR - status %x addr (7 Bit) in %s mode.\n"\ + ,val,((command==MV_TWSI_WRITE)?"Write":"Read") )); + return MV_FAIL; + } + + return MV_OK; +} + +/******************************************************************************* +* twsiDataWrite - Trnasmit a data block over TWSI bus. +* +* DESCRIPTION: +* This function writes a given data block to TWSI bus in 8 bit granularity. +* first The function waits for interrupt flag to be active then +* For each 8-bit data: +* The function writes data to data register. It then clears +* interrupt flag which drives the data on the TWSI bus. +* The function then waits for interrupt flag to be active and status +* 0x28 to be set. +* +* +* INPUT: +* chanNum - TWSI channel +* pBlock - Data block. +* blockSize - number of chars in pBlock. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_OK - if transmiting the block completed succesfully, +* MV_BAD_PARAM - if pBlock is NULL, +* MV_FAIL otherwmise. +* +*******************************************************************************/ +static MV_STATUS twsiDataTransmit(MV_U8 chanNum, MV_U8 *pBlock, MV_U32 blockSize) +{ + MV_U32 timeout, temp, blockSizeWr = blockSize; + + if(NULL == pBlock) + return MV_BAD_PARAM; + + /* wait for Int to be Set */ + timeout = 0; + while( !twsiMainIntGet(chanNum) && (timeout++ < TWSI_TIMEOUT_VALUE)); + + /* check for timeout */ + if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: twsiDataTransmit ERROR - Read Data Int TimeOut.\n")) + return MV_TIMEOUT; + + while(blockSizeWr) + { + /* write the data*/ + MV_REG_WRITE(TWSI_DATA_REG(chanNum),(MV_U32)*pBlock); + DB(mvOsPrintf("TWSI: twsiDataTransmit place = %d write %x \n",\ + blockSize - blockSizeWr, *pBlock)); + pBlock++; + blockSizeWr--; + + twsiIntFlgClr(chanNum); + + /* wait for Int to be Set */ + timeout = 0; + while( !twsiMainIntGet(chanNum) && (timeout++ < TWSI_TIMEOUT_VALUE)); + + /* check for timeout */ + if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: twsiDataTransmit ERROR - Read Data Int TimeOut.\n")) + return MV_TIMEOUT; + + /* check the status */ + temp = twsiStsGet(chanNum); + if(temp != TWSI_M_TRAN_DATA_BYTE_ACK_REC) + { + mvOsPrintf("TWSI: twsiDataTransmit ERROR - status %x in write trans\n",temp); + return MV_FAIL; + } + + } + + return MV_OK; +} + +/******************************************************************************* +* twsiDataReceive - Receive data block from TWSI bus. +* +* DESCRIPTION: +* This function receive data block from TWSI bus in 8bit granularity +* into pBlock buffer. +* first The function waits for interrupt flag to be active then +* For each 8-bit data: +* It clears the interrupt flag which allows the next data to be +* received from TWSI bus. +* The function waits for interrupt flag to be active, +* and status reg is 0x50. +* Then the function reads data from data register, and copies it to +* the given buffer. +* +* INPUT: +* chanNum - TWSI channel +* blockSize - number of bytes to read. +* +* OUTPUT: +* pBlock - Data block. +* +* RETURN: +* MV_OK - if receive transaction completed succesfully, +* MV_BAD_PARAM - if pBlock is NULL, +* MV_FAIL otherwmise. +* +*******************************************************************************/ +static MV_STATUS twsiDataReceive(MV_U8 chanNum, MV_U8 *pBlock, MV_U32 blockSize) +{ + MV_U32 timeout, temp, blockSizeRd = blockSize; + if(NULL == pBlock) + return MV_BAD_PARAM; + + /* wait for Int to be Set */ + timeout = 0; + while( !twsiMainIntGet(chanNum) && (timeout++ < TWSI_TIMEOUT_VALUE)); + + /* check for timeout */ + if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: twsiDataReceive ERROR - Read Data int Time out .\n")) + return MV_TIMEOUT; + + while(blockSizeRd) + { + if(blockSizeRd == 1) + { + /* clear ack and Int flag */ + temp = MV_REG_READ(TWSI_CONTROL_REG(chanNum)); + temp &= ~(TWSI_CONTROL_ACK); + MV_REG_WRITE(TWSI_CONTROL_REG(chanNum), temp); + } + twsiIntFlgClr(chanNum); + /* wait for Int to be Set */ + timeout = 0; + while( (!twsiMainIntGet(chanNum)) && (timeout++ < TWSI_TIMEOUT_VALUE)); + + /* check for timeout */ + if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: twsiDataReceive ERROR - Read Data Int Time out .\n")) + return MV_TIMEOUT; + + /* check the status */ + temp = twsiStsGet(chanNum); + if((temp != TWSI_M_REC_RD_DATA_ACK_TRA) && (blockSizeRd !=1)) + { + mvOsPrintf("TWSI: twsiDataReceive ERROR - status %x in read trans \n",temp); + return MV_FAIL; + } + else if((temp != TWSI_M_REC_RD_DATA_ACK_NOT_TRA) && (blockSizeRd ==1)) + { + mvOsPrintf("TWSI: twsiDataReceive ERROR - status %x in Rd Terminate\n",temp); + return MV_FAIL; + } + + /* read the data*/ + *pBlock = (MV_U8)MV_REG_READ(TWSI_DATA_REG(chanNum)); + DB(mvOsPrintf("TWSI: twsiDataReceive place %d read %x \n",\ + blockSize - blockSizeRd,*pBlock)); + pBlock++; + blockSizeRd--; + } + + return MV_OK; +} + + + +/******************************************************************************* +* twsiTargetOffsSet - Set TWST target offset on TWSI bus. +* +* DESCRIPTION: +* The function support TWSI targets that have inside address space (for +* example EEPROMs). The function: +* 1) Convert the given offset into pBlock and size. +* in case the offset should be set to a TWSI slave which support +* more then 256 bytes offset, the offset setting will be done +* in 2 transactions. +* 2) Use twsiDataTransmit to place those on the bus. +* +* INPUT: +* chanNum - TWSI channel +* offset - offset to be set on the EEPROM device. +* moreThen256 - whether the EEPROM device support more then 256 byte offset. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_OK - if setting the offset completed succesfully. +* MV_FAIL otherwmise. +* +*******************************************************************************/ +static MV_STATUS twsiTargetOffsSet(MV_U8 chanNum, MV_U32 offset, MV_BOOL moreThen256) +{ + MV_U8 offBlock[2]; + MV_U32 offSize; + + if(moreThen256 == MV_TRUE) + { + offBlock[0] = (offset >> 8) & 0xff; + offBlock[1] = offset & 0xff; + offSize = 2; + } + else + { + offBlock[0] = offset & 0xff; + offSize = 1; + } + DB(mvOsPrintf("TWSI: twsiTargetOffsSet offSize = %x addr1 = %x addr2 = %x\n",\ + offSize,offBlock[0],offBlock[1])); + return twsiDataTransmit(chanNum, offBlock, offSize); + +} + +/******************************************************************************* +* mvTwsiRead - Read data block from a TWSI Slave. +* +* DESCRIPTION: +* The function calls the following functions: +* -) mvTwsiStartBitSet(); +* if(EEPROM device) +* -) mvTwsiAddrSet(w); +* -) twsiTargetOffsSet(); +* -) mvTwsiStartBitSet(); +* -) mvTwsiAddrSet(r); +* -) twsiDataReceive(); +* -) mvTwsiStopBitSet(); +* +* INPUT: +* chanNum - TWSI channel +* pTwsiSlave - Twsi Slave structure. +* blockSize - number of bytes to read. +* +* OUTPUT: +* pBlock - Data block. +* +* RETURN: +* MV_OK - if EEPROM read transaction completed succesfully, +* MV_BAD_PARAM - if pBlock is NULL, +* MV_FAIL otherwmise. +* +*******************************************************************************/ +MV_STATUS mvTwsiRead(MV_U8 chanNum, MV_TWSI_SLAVE *pTwsiSlave, MV_U8 *pBlock, MV_U32 blockSize) +{ + if((NULL == pBlock) || (NULL == pTwsiSlave)) + return MV_BAD_PARAM; + if(MV_OK != mvTwsiStartBitSet(chanNum)) + { + mvTwsiStopBitSet(chanNum); + return MV_FAIL; + } + + DB(mvOsPrintf("TWSI: mvTwsiEepromRead after mvTwsiStartBitSet\n")); + + /* in case offset exsist (i.e. eeprom ) */ + if(MV_TRUE == pTwsiSlave->validOffset) + { + if(MV_OK != mvTwsiAddrSet(chanNum, &(pTwsiSlave->slaveAddr), MV_TWSI_WRITE)) + { + mvTwsiStopBitSet(chanNum); + return MV_FAIL; + } + DB(mvOsPrintf("TWSI: mvTwsiEepromRead after mvTwsiAddrSet\n")); + if(MV_OK != twsiTargetOffsSet(chanNum, pTwsiSlave->offset, pTwsiSlave->moreThen256)) + { + mvTwsiStopBitSet(chanNum); + return MV_FAIL; + } + DB(mvOsPrintf("TWSI: mvTwsiEepromRead after twsiTargetOffsSet\n")); + if(MV_OK != mvTwsiStartBitSet(chanNum)) + { + mvTwsiStopBitSet(chanNum); + return MV_FAIL; + } + DB(mvOsPrintf("TWSI: mvTwsiEepromRead after mvTwsiStartBitSet\n")); + } + if(MV_OK != mvTwsiAddrSet(chanNum, &(pTwsiSlave->slaveAddr), MV_TWSI_READ)) + { + mvTwsiStopBitSet(chanNum); + return MV_FAIL; + } + DB(mvOsPrintf("TWSI: mvTwsiEepromRead after mvTwsiAddrSet\n")); + if(MV_OK != twsiDataReceive(chanNum, pBlock, blockSize)) + { + mvTwsiStopBitSet(chanNum); + return MV_FAIL; + } + DB(mvOsPrintf("TWSI: mvTwsiEepromRead after twsiDataReceive\n")); + + if(MV_OK != mvTwsiStopBitSet(chanNum)) + { + return MV_FAIL; + } + + twsiAckBitSet(chanNum); + + DB(mvOsPrintf("TWSI: mvTwsiEepromRead after mvTwsiStopBitSet\n")); + + return MV_OK; +} + +/******************************************************************************* +* mvTwsiWrite - Write data block to a TWSI Slave. +* +* DESCRIPTION: +* The function calls the following functions: +* -) mvTwsiStartBitSet(); +* -) mvTwsiAddrSet(); +* -)if(EEPROM device) +* -) twsiTargetOffsSet(); +* -) twsiDataTransmit(); +* -) mvTwsiStopBitSet(); +* +* INPUT: +* chanNum - TWSI channel +* eepromAddress - eeprom address. +* blockSize - number of bytes to write. +* pBlock - Data block. +* +* OUTPUT: +* None +* +* RETURN: +* MV_OK - if EEPROM read transaction completed succesfully. +* MV_BAD_PARAM - if pBlock is NULL, +* MV_FAIL otherwmise. +* +* NOTE: Part of the EEPROM, required that the offset will be aligned to the +* max write burst supported. +*******************************************************************************/ +MV_STATUS mvTwsiWrite(MV_U8 chanNum, MV_TWSI_SLAVE *pTwsiSlave, MV_U8 *pBlock, MV_U32 blockSize) +{ + if((NULL == pBlock) || (NULL == pTwsiSlave)) + return MV_BAD_PARAM; + + if(MV_OK != mvTwsiStartBitSet(chanNum)) + { + mvTwsiStopBitSet(chanNum); + return MV_FAIL; + } + + DB(mvOsPrintf("TWSI: mvTwsiEepromWrite after mvTwsiStartBitSet\n")); + if(MV_OK != mvTwsiAddrSet(chanNum, &(pTwsiSlave->slaveAddr), MV_TWSI_WRITE)) + { + mvTwsiStopBitSet(chanNum); + return MV_FAIL; + } + DB(mvOsPrintf("TWSI :mvTwsiEepromWrite after mvTwsiAddrSet\n")); + + /* in case offset exsist (i.e. eeprom ) */ + if(MV_TRUE == pTwsiSlave->validOffset) + { + if(MV_OK != twsiTargetOffsSet(chanNum, pTwsiSlave->offset, pTwsiSlave->moreThen256)) + { + mvTwsiStopBitSet(chanNum); + return MV_FAIL; + } + DB(mvOsPrintf("TWSI: mvTwsiEepromWrite after twsiTargetOffsSet\n")); + } + if(MV_OK != twsiDataTransmit(chanNum, pBlock, blockSize)) + { + mvTwsiStopBitSet(chanNum); + return MV_FAIL; + } + DB(mvOsPrintf("TWSI: mvTwsiEepromWrite after twsiDataTransmit\n")); + if(MV_OK != mvTwsiStopBitSet(chanNum)) + { + return MV_FAIL; + } + DB(mvOsPrintf("TWSI: mvTwsiEepromWrite after mvTwsiStopBitSet\n")); + + return MV_OK; +}