X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fsvn-archive%2Farchive.git;a=blobdiff_plain;f=target%2Flinux%2Fs3c24xx%2Ffiles-2.6.31%2Fdrivers%2Far6000%2Finclude%2Fwmix.h;fp=target%2Flinux%2Fs3c24xx%2Ffiles-2.6.31%2Fdrivers%2Far6000%2Finclude%2Fwmix.h;h=0000000000000000000000000000000000000000;hp=8f12b5e5586e186a7483eddc905f116d482a712f;hb=882e36ca7f56ba2427d7f2791b26501f2e4669f4;hpb=851d953350108e427064a344da1407c96621fdf8 diff --git a/target/linux/s3c24xx/files-2.6.31/drivers/ar6000/include/wmix.h b/target/linux/s3c24xx/files-2.6.31/drivers/ar6000/include/wmix.h deleted file mode 100644 index 8f12b5e558..0000000000 --- a/target/linux/s3c24xx/files-2.6.31/drivers/ar6000/include/wmix.h +++ /dev/null @@ -1,233 +0,0 @@ -/* - * Copyright (c) 2004-2005 Atheros Communications Inc. - * All rights reserved. - * - * - * $ATH_LICENSE_HOSTSDK0_C$ - * - * This file contains extensions of the WMI protocol specified in the - * Wireless Module Interface (WMI). It includes definitions of all - * extended commands and events. Extensions include useful commands - * that are not directly related to wireless activities. They may - * be hardware-specific, and they might not be supported on all - * implementations. - * - * Extended WMIX commands are encapsulated in a WMI message with - * cmd=WMI_EXTENSION_CMD. - * - */ - -#ifndef _WMIX_H_ -#define _WMIX_H_ - -#ifdef __cplusplus -extern "C" { -#endif - -#ifndef ATH_TARGET -#include "athstartpack.h" -#endif - -#include "dbglog.h" - -/* - * Extended WMI commands are those that are needed during wireless - * operation, but which are not really wireless commands. This allows, - * for instance, platform-specific commands. Extended WMI commands are - * embedded in a WMI command message with WMI_COMMAND_ID=WMI_EXTENSION_CMDID. - * Extended WMI events are similarly embedded in a WMI event message with - * WMI_EVENT_ID=WMI_EXTENSION_EVENTID. - */ -typedef PREPACK struct { - A_UINT32 commandId; -} POSTPACK WMIX_CMD_HDR; - -typedef enum { - WMIX_DSETOPEN_REPLY_CMDID = 0x2001, - WMIX_DSETDATA_REPLY_CMDID, - WMIX_GPIO_OUTPUT_SET_CMDID, - WMIX_GPIO_INPUT_GET_CMDID, - WMIX_GPIO_REGISTER_SET_CMDID, - WMIX_GPIO_REGISTER_GET_CMDID, - WMIX_GPIO_INTR_ACK_CMDID, - WMIX_HB_CHALLENGE_RESP_CMDID, - WMIX_DBGLOG_CFG_MODULE_CMDID, -} WMIX_COMMAND_ID; - -typedef enum { - WMIX_DSETOPENREQ_EVENTID = 0x3001, - WMIX_DSETCLOSE_EVENTID, - WMIX_DSETDATAREQ_EVENTID, - WMIX_GPIO_INTR_EVENTID, - WMIX_GPIO_DATA_EVENTID, - WMIX_GPIO_ACK_EVENTID, - WMIX_HB_CHALLENGE_RESP_EVENTID, - WMIX_DBGLOG_EVENTID, -} WMIX_EVENT_ID; - -/* - * =============DataSet support================= - */ - -/* - * WMIX_DSETOPENREQ_EVENTID - * DataSet Open Request Event - */ -typedef PREPACK struct { - A_UINT32 dset_id; - A_UINT32 targ_dset_handle; /* echo'ed, not used by Host, */ - A_UINT32 targ_reply_fn; /* echo'ed, not used by Host, */ - A_UINT32 targ_reply_arg; /* echo'ed, not used by Host, */ -} POSTPACK WMIX_DSETOPENREQ_EVENT; - -/* - * WMIX_DSETCLOSE_EVENTID - * DataSet Close Event - */ -typedef PREPACK struct { - A_UINT32 access_cookie; -} POSTPACK WMIX_DSETCLOSE_EVENT; - -/* - * WMIX_DSETDATAREQ_EVENTID - * DataSet Data Request Event - */ -typedef PREPACK struct { - A_UINT32 access_cookie; - A_UINT32 offset; - A_UINT32 length; - A_UINT32 targ_buf; /* echo'ed, not used by Host, */ - A_UINT32 targ_reply_fn; /* echo'ed, not used by Host, */ - A_UINT32 targ_reply_arg; /* echo'ed, not used by Host, */ -} POSTPACK WMIX_DSETDATAREQ_EVENT; - -typedef PREPACK struct { - A_UINT32 status; - A_UINT32 targ_dset_handle; - A_UINT32 targ_reply_fn; - A_UINT32 targ_reply_arg; - A_UINT32 access_cookie; - A_UINT32 size; - A_UINT32 version; -} POSTPACK WMIX_DSETOPEN_REPLY_CMD; - -typedef PREPACK struct { - A_UINT32 status; - A_UINT32 targ_buf; - A_UINT32 targ_reply_fn; - A_UINT32 targ_reply_arg; - A_UINT32 length; - A_UINT8 buf[1]; -} POSTPACK WMIX_DSETDATA_REPLY_CMD; - - -/* - * =============GPIO support================= - * All masks are 18-bit masks with bit N operating on GPIO pin N. - */ - -#include "gpio.h" - -/* - * Set GPIO pin output state. - * In order for output to be driven, a pin must be enabled for output. - * This can be done during initialization through the GPIO Configuration - * DataSet, or during operation with the enable_mask. - * - * If a request is made to simultaneously set/clear or set/disable or - * clear/disable or disable/enable, results are undefined. - */ -typedef PREPACK struct { - A_UINT32 set_mask; /* pins to set */ - A_UINT32 clear_mask; /* pins to clear */ - A_UINT32 enable_mask; /* pins to enable for output */ - A_UINT32 disable_mask; /* pins to disable/tristate */ -} POSTPACK WMIX_GPIO_OUTPUT_SET_CMD; - -/* - * Set a GPIO register. For debug/exceptional cases. - * Values for gpioreg_id are GPIO_REGISTER_IDs, defined in a - * platform-dependent header. - */ -typedef PREPACK struct { - A_UINT32 gpioreg_id; /* GPIO register ID */ - A_UINT32 value; /* value to write */ -} POSTPACK WMIX_GPIO_REGISTER_SET_CMD; - -/* Get a GPIO register. For debug/exceptional cases. */ -typedef PREPACK struct { - A_UINT32 gpioreg_id; /* GPIO register to read */ -} POSTPACK WMIX_GPIO_REGISTER_GET_CMD; - -/* - * Host acknowledges and re-arms GPIO interrupts. A single - * message should be used to acknowledge all interrupts that - * were delivered in an earlier WMIX_GPIO_INTR_EVENT message. - */ -typedef PREPACK struct { - A_UINT32 ack_mask; /* interrupts to acknowledge */ -} POSTPACK WMIX_GPIO_INTR_ACK_CMD; - -/* - * Target informs Host of GPIO interrupts that have ocurred since the - * last WMIX_GIPO_INTR_ACK_CMD was received. Additional information -- - * the current GPIO input values is provided -- in order to support - * use of a GPIO interrupt as a Data Valid signal for other GPIO pins. - */ -typedef PREPACK struct { - A_UINT32 intr_mask; /* pending GPIO interrupts */ - A_UINT32 input_values; /* recent GPIO input values */ -} POSTPACK WMIX_GPIO_INTR_EVENT; - -/* - * Target responds to Host's earlier WMIX_GPIO_INPUT_GET_CMDID request - * using a GPIO_DATA_EVENT with - * value set to the mask of GPIO pin inputs and - * reg_id set to GPIO_ID_NONE - * - * - * Target responds to Hosts's earlier WMIX_GPIO_REGISTER_GET_CMDID request - * using a GPIO_DATA_EVENT with - * value set to the value of the requested register and - * reg_id identifying the register (reflects the original request) - * NB: reg_id supports the future possibility of unsolicited - * WMIX_GPIO_DATA_EVENTs (for polling GPIO input), and it may - * simplify Host GPIO support. - */ -typedef PREPACK struct { - A_UINT32 value; - A_UINT32 reg_id; -} POSTPACK WMIX_GPIO_DATA_EVENT; - -/* - * =============Error Detection support================= - */ - -/* - * WMIX_HB_CHALLENGE_RESP_CMDID - * Heartbeat Challenge Response command - */ -typedef PREPACK struct { - A_UINT32 cookie; - A_UINT32 source; -} POSTPACK WMIX_HB_CHALLENGE_RESP_CMD; - -/* - * WMIX_HB_CHALLENGE_RESP_EVENTID - * Heartbeat Challenge Response Event - */ -#define WMIX_HB_CHALLENGE_RESP_EVENT WMIX_HB_CHALLENGE_RESP_CMD - -typedef PREPACK struct { - struct dbglog_config_s config; -} POSTPACK WMIX_DBGLOG_CFG_MODULE_CMD; - -#ifndef ATH_TARGET -#include "athendpack.h" -#endif - -#ifdef __cplusplus -} -#endif - -#endif /* _WMIX_H_ */