From 31d675cf4cf35f4cc5a1e68d7f5d8c43500591b0 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 19 Mar 2006 05:20:55 +0000 Subject: [PATCH] clean up brcm-2.4 system code SVN-Revision: 3410 --- .../linux/brcm-2.4/patches/001-bcm47xx.patch | 7268 ++++------------- 1 file changed, 1607 insertions(+), 5661 deletions(-) diff --git a/openwrt/target/linux/brcm-2.4/patches/001-bcm47xx.patch b/openwrt/target/linux/brcm-2.4/patches/001-bcm47xx.patch index 9d919156b6..2e64b0fc3e 100644 --- a/openwrt/target/linux/brcm-2.4/patches/001-bcm47xx.patch +++ b/openwrt/target/linux/brcm-2.4/patches/001-bcm47xx.patch @@ -1194,433 +1194,6 @@ diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/bcmendian.h linux-2.4.32-brcm/ +) + +#endif /* _BCMENDIAN_H_ */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/bcmenet47xx.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/bcmenet47xx.h ---- linux-2.4.32/arch/mips/bcm947xx/include/bcmenet47xx.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/bcmenet47xx.h 2005-12-16 23:39:10.700821500 +0100 -@@ -0,0 +1,229 @@ -+/* -+ * Hardware-specific definitions for -+ * Broadcom BCM47XX 10/100 Mbps Ethernet cores. -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation; -+ * the contents of this file may not be disclosed to third parties, copied -+ * or duplicated in any form, in whole or in part, without the prior -+ * written permission of Broadcom Corporation. -+ * $Id$ -+ */ -+ -+#ifndef _bcmenet_47xx_h_ -+#define _bcmenet_47xx_h_ -+ -+#include -+#include -+#include -+ -+#define BCMENET_NFILTERS 64 /* # ethernet address filter entries */ -+#define BCMENET_MCHASHBASE 0x200 /* multicast hash filter base address */ -+#define BCMENET_MCHASHSIZE 256 /* multicast hash filter size in bytes */ -+#define BCMENET_MAX_DMA 4096 /* chip has 12 bits of DMA addressing */ -+ -+/* power management event wakeup pattern constants */ -+#define BCMENET_NPMP 4 /* chip supports 4 wakeup patterns */ -+#define BCMENET_PMPBASE 0x400 /* wakeup pattern base address */ -+#define BCMENET_PMPSIZE 0x80 /* 128bytes each pattern */ -+#define BCMENET_PMMBASE 0x600 /* wakeup mask base address */ -+#define BCMENET_PMMSIZE 0x10 /* 128bits each mask */ -+ -+/* cpp contortions to concatenate w/arg prescan */ -+#ifndef PAD -+#define _PADLINE(line) pad ## line -+#define _XSTR(line) _PADLINE(line) -+#define PAD _XSTR(__LINE__) -+#endif /* PAD */ -+ -+/* -+ * Host Interface Registers -+ */ -+typedef volatile struct _bcmenettregs { -+ /* Device and Power Control */ -+ uint32 devcontrol; -+ uint32 PAD[2]; -+ uint32 biststatus; -+ uint32 wakeuplength; -+ uint32 PAD[3]; -+ -+ /* Interrupt Control */ -+ uint32 intstatus; -+ uint32 intmask; -+ uint32 gptimer; -+ uint32 PAD[23]; -+ -+ /* Ethernet MAC Address Filtering Control */ -+ uint32 PAD[2]; -+ uint32 enetftaddr; -+ uint32 enetftdata; -+ uint32 PAD[2]; -+ -+ /* Ethernet MAC Control */ -+ uint32 emactxmaxburstlen; -+ uint32 emacrxmaxburstlen; -+ uint32 emaccontrol; -+ uint32 emacflowcontrol; -+ -+ uint32 PAD[20]; -+ -+ /* DMA Lazy Interrupt Control */ -+ uint32 intrecvlazy; -+ uint32 PAD[63]; -+ -+ /* DMA engine */ -+ dma32regp_t dmaregs; -+ dma32diag_t dmafifo; -+ uint32 PAD[116]; -+ -+ /* EMAC Registers */ -+ uint32 rxconfig; -+ uint32 rxmaxlength; -+ uint32 txmaxlength; -+ uint32 PAD; -+ uint32 mdiocontrol; -+ uint32 mdiodata; -+ uint32 emacintmask; -+ uint32 emacintstatus; -+ uint32 camdatalo; -+ uint32 camdatahi; -+ uint32 camcontrol; -+ uint32 enetcontrol; -+ uint32 txcontrol; -+ uint32 txwatermark; -+ uint32 mibcontrol; -+ uint32 PAD[49]; -+ -+ /* EMAC MIB counters */ -+ bcmenetmib_t mib; -+ -+ uint32 PAD[585]; -+ -+ /* Sonics SiliconBackplane config registers */ -+ sbconfig_t sbconfig; -+} bcmenetregs_t; -+ -+/* device control */ -+#define DC_PM ((uint32)1 << 7) /* pattern filtering enable */ -+#define DC_IP ((uint32)1 << 10) /* internal ephy present (rev >= 1) */ -+#define DC_ER ((uint32)1 << 15) /* ephy reset */ -+#define DC_MP ((uint32)1 << 16) /* mii phy mode enable */ -+#define DC_CO ((uint32)1 << 17) /* mii phy mode: enable clocks */ -+#define DC_PA_MASK 0x7c0000 /* mii phy mode: mdc/mdio phy address */ -+#define DC_PA_SHIFT 18 -+#define DC_FS_MASK 0x03800000 /* fifo size (rev >= 8) */ -+#define DC_FS_SHIFT 23 -+#define DC_FS_4K 0 /* 4Kbytes */ -+#define DC_FS_512 1 /* 512bytes */ -+ -+/* wakeup length */ -+#define WL_P0_MASK 0x7f /* pattern 0 */ -+#define WL_D0 ((uint32)1 << 7) -+#define WL_P1_MASK 0x7f00 /* pattern 1 */ -+#define WL_P1_SHIFT 8 -+#define WL_D1 ((uint32)1 << 15) -+#define WL_P2_MASK 0x7f0000 /* pattern 2 */ -+#define WL_P2_SHIFT 16 -+#define WL_D2 ((uint32)1 << 23) -+#define WL_P3_MASK 0x7f000000 /* pattern 3 */ -+#define WL_P3_SHIFT 24 -+#define WL_D3 ((uint32)1 << 31) -+ -+/* intstatus and intmask */ -+#define I_PME ((uint32)1 << 6) /* power management event */ -+#define I_TO ((uint32)1 << 7) /* general purpose timeout */ -+#define I_PC ((uint32)1 << 10) /* descriptor error */ -+#define I_PD ((uint32)1 << 11) /* data error */ -+#define I_DE ((uint32)1 << 12) /* descriptor protocol error */ -+#define I_RU ((uint32)1 << 13) /* receive descriptor underflow */ -+#define I_RO ((uint32)1 << 14) /* receive fifo overflow */ -+#define I_XU ((uint32)1 << 15) /* transmit fifo underflow */ -+#define I_RI ((uint32)1 << 16) /* receive interrupt */ -+#define I_XI ((uint32)1 << 24) /* transmit interrupt */ -+#define I_EM ((uint32)1 << 26) /* emac interrupt */ -+#define I_MW ((uint32)1 << 27) /* mii write */ -+#define I_MR ((uint32)1 << 28) /* mii read */ -+ -+/* emaccontrol */ -+#define EMC_CG ((uint32)1 << 0) /* crc32 generation enable */ -+#define EMC_EP ((uint32)1 << 2) /* onchip ephy: powerdown (rev >= 1) */ -+#define EMC_ED ((uint32)1 << 3) /* onchip ephy: energy detected (rev >= 1) */ -+#define EMC_LC_MASK 0xe0 /* onchip ephy: led control (rev >= 1) */ -+#define EMC_LC_SHIFT 5 -+ -+/* emacflowcontrol */ -+#define EMF_RFH_MASK 0xff /* rx fifo hi water mark */ -+#define EMF_PG ((uint32)1 << 15) /* enable pause frame generation */ -+ -+/* interrupt receive lazy */ -+#define IRL_TO_MASK 0x00ffffff /* timeout */ -+#define IRL_FC_MASK 0xff000000 /* frame count */ -+#define IRL_FC_SHIFT 24 /* frame count */ -+ -+/* emac receive config */ -+#define ERC_DB ((uint32)1 << 0) /* disable broadcast */ -+#define ERC_AM ((uint32)1 << 1) /* accept all multicast */ -+#define ERC_RDT ((uint32)1 << 2) /* receive disable while transmitting */ -+#define ERC_PE ((uint32)1 << 3) /* promiscuous enable */ -+#define ERC_LE ((uint32)1 << 4) /* loopback enable */ -+#define ERC_FE ((uint32)1 << 5) /* enable flow control */ -+#define ERC_UF ((uint32)1 << 6) /* accept unicast flow control frame */ -+#define ERC_RF ((uint32)1 << 7) /* reject filter */ -+#define ERC_CA ((uint32)1 << 8) /* cam absent */ -+ -+/* emac mdio control */ -+#define MC_MF_MASK 0x7f /* mdc frequency */ -+#define MC_PE ((uint32)1 << 7) /* mii preamble enable */ -+ -+/* emac mdio data */ -+#define MD_DATA_MASK 0xffff /* r/w data */ -+#define MD_TA_MASK 0x30000 /* turnaround value */ -+#define MD_TA_SHIFT 16 -+#define MD_TA_VALID (2 << MD_TA_SHIFT) /* valid ta */ -+#define MD_RA_MASK 0x7c0000 /* register address */ -+#define MD_RA_SHIFT 18 -+#define MD_PMD_MASK 0xf800000 /* physical media device */ -+#define MD_PMD_SHIFT 23 -+#define MD_OP_MASK 0x30000000 /* opcode */ -+#define MD_OP_SHIFT 28 -+#define MD_OP_WRITE (1 << MD_OP_SHIFT) /* write op */ -+#define MD_OP_READ (2 << MD_OP_SHIFT) /* read op */ -+#define MD_SB_MASK 0xc0000000 /* start bits */ -+#define MD_SB_SHIFT 30 -+#define MD_SB_START (0x1 << MD_SB_SHIFT) /* start of frame */ -+ -+/* emac intstatus and intmask */ -+#define EI_MII ((uint32)1 << 0) /* mii mdio interrupt */ -+#define EI_MIB ((uint32)1 << 1) /* mib interrupt */ -+#define EI_FLOW ((uint32)1 << 2) /* flow control interrupt */ -+ -+/* emac cam data high */ -+#define CD_V ((uint32)1 << 16) /* valid bit */ -+ -+/* emac cam control */ -+#define CC_CE ((uint32)1 << 0) /* cam enable */ -+#define CC_MS ((uint32)1 << 1) /* mask select */ -+#define CC_RD ((uint32)1 << 2) /* read */ -+#define CC_WR ((uint32)1 << 3) /* write */ -+#define CC_INDEX_MASK 0x3f0000 /* index */ -+#define CC_INDEX_SHIFT 16 -+#define CC_CB ((uint32)1 << 31) /* cam busy */ -+ -+/* emac ethernet control */ -+#define EC_EE ((uint32)1 << 0) /* emac enable */ -+#define EC_ED ((uint32)1 << 1) /* emac disable */ -+#define EC_ES ((uint32)1 << 2) /* emac soft reset */ -+#define EC_EP ((uint32)1 << 3) /* external phy select */ -+ -+/* emac transmit control */ -+#define EXC_FD ((uint32)1 << 0) /* full duplex */ -+#define EXC_FM ((uint32)1 << 1) /* flowmode */ -+#define EXC_SB ((uint32)1 << 2) /* single backoff enable */ -+#define EXC_SS ((uint32)1 << 3) /* small slottime */ -+ -+/* emac mib control */ -+#define EMC_RZ ((uint32)1 << 0) /* autoclear on read */ -+ -+#endif /* _bcmenet_47xx_h_ */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/bcmenetmib.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/bcmenetmib.h ---- linux-2.4.32/arch/mips/bcm947xx/include/bcmenetmib.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/bcmenetmib.h 2005-12-16 23:39:10.700821500 +0100 -@@ -0,0 +1,81 @@ -+/* -+ * Hardware-specific MIB definition for -+ * Broadcom Home Networking Division -+ * BCM44XX and BCM47XX 10/100 Mbps Ethernet cores. -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation; -+ * the contents of this file may not be disclosed to third parties, copied -+ * or duplicated in any form, in whole or in part, without the prior -+ * written permission of Broadcom Corporation. -+ * $Id$ -+ */ -+ -+#ifndef _bcmenetmib_h_ -+#define _bcmenetmib_h_ -+ -+/* cpp contortions to concatenate w/arg prescan */ -+#ifndef PAD -+#define _PADLINE(line) pad ## line -+#define _XSTR(line) _PADLINE(line) -+#define PAD _XSTR(__LINE__) -+#endif /* PAD */ -+ -+/* -+ * EMAC MIB Registers -+ */ -+typedef volatile struct { -+ uint32 tx_good_octets; -+ uint32 tx_good_pkts; -+ uint32 tx_octets; -+ uint32 tx_pkts; -+ uint32 tx_broadcast_pkts; -+ uint32 tx_multicast_pkts; -+ uint32 tx_len_64; -+ uint32 tx_len_65_to_127; -+ uint32 tx_len_128_to_255; -+ uint32 tx_len_256_to_511; -+ uint32 tx_len_512_to_1023; -+ uint32 tx_len_1024_to_max; -+ uint32 tx_jabber_pkts; -+ uint32 tx_oversize_pkts; -+ uint32 tx_fragment_pkts; -+ uint32 tx_underruns; -+ uint32 tx_total_cols; -+ uint32 tx_single_cols; -+ uint32 tx_multiple_cols; -+ uint32 tx_excessive_cols; -+ uint32 tx_late_cols; -+ uint32 tx_defered; -+ uint32 tx_carrier_lost; -+ uint32 tx_pause_pkts; -+ uint32 PAD[8]; -+ -+ uint32 rx_good_octets; -+ uint32 rx_good_pkts; -+ uint32 rx_octets; -+ uint32 rx_pkts; -+ uint32 rx_broadcast_pkts; -+ uint32 rx_multicast_pkts; -+ uint32 rx_len_64; -+ uint32 rx_len_65_to_127; -+ uint32 rx_len_128_to_255; -+ uint32 rx_len_256_to_511; -+ uint32 rx_len_512_to_1023; -+ uint32 rx_len_1024_to_max; -+ uint32 rx_jabber_pkts; -+ uint32 rx_oversize_pkts; -+ uint32 rx_fragment_pkts; -+ uint32 rx_missed_pkts; -+ uint32 rx_crc_align_errs; -+ uint32 rx_undersize; -+ uint32 rx_crc_errs; -+ uint32 rx_align_errs; -+ uint32 rx_symbol_errs; -+ uint32 rx_pause_pkts; -+ uint32 rx_nonpause_pkts; -+} bcmenetmib_t; -+ -+#endif /* _bcmenetmib_h_ */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/bcmenetphy.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/bcmenetphy.h ---- linux-2.4.32/arch/mips/bcm947xx/include/bcmenetphy.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/bcmenetphy.h 2005-12-16 23:39:10.700821500 +0100 -@@ -0,0 +1,58 @@ -+/* -+ * Misc Broadcom BCM47XX MDC/MDIO enet phy definitions. -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation; -+ * the contents of this file may not be disclosed to third parties, copied -+ * or duplicated in any form, in whole or in part, without the prior -+ * written permission of Broadcom Corporation. -+ * $Id$ -+ */ -+ -+#ifndef _bcmenetphy_h_ -+#define _bcmenetphy_h_ -+ -+/* phy address */ -+#define MAXEPHY 32 /* mdio phy addresses are 5bit quantities */ -+#define EPHY_MASK 0x1f -+#define EPHY_NONE 31 /* nvram: no phy present at all */ -+#define EPHY_NOREG 30 /* nvram: no local phy regs */ -+ -+/* just a few phy registers */ -+#define CTL_RESET (1 << 15) /* reset */ -+#define CTL_LOOP (1 << 14) /* loopback */ -+#define CTL_SPEED (1 << 13) /* speed selection 0=10, 1=100 */ -+#define CTL_ANENAB (1 << 12) /* autonegotiation enable */ -+#define CTL_RESTART (1 << 9) /* restart autonegotiation */ -+#define CTL_DUPLEX (1 << 8) /* duplex mode 0=half, 1=full */ -+ -+#define ADV_10FULL (1 << 6) /* autonegotiate advertise 10full */ -+#define ADV_10HALF (1 << 5) /* autonegotiate advertise 10half */ -+#define ADV_100FULL (1 << 8) /* autonegotiate advertise 100full */ -+#define ADV_100HALF (1 << 7) /* autonegotiate advertise 100half */ -+ -+/* link partner ability register */ -+#define LPA_SLCT 0x001f /* same as advertise selector */ -+#define LPA_10HALF 0x0020 /* can do 10mbps half-duplex */ -+#define LPA_10FULL 0x0040 /* can do 10mbps full-duplex */ -+#define LPA_100HALF 0x0080 /* can do 100mbps half-duplex */ -+#define LPA_100FULL 0x0100 /* can do 100mbps full-duplex */ -+#define LPA_100BASE4 0x0200 /* can do 100mbps 4k packets */ -+#define LPA_RESV 0x1c00 /* unused */ -+#define LPA_RFAULT 0x2000 /* link partner faulted */ -+#define LPA_LPACK 0x4000 /* link partner acked us */ -+#define LPA_NPAGE 0x8000 /* next page bit */ -+ -+#define LPA_DUPLEX (LPA_10FULL | LPA_100FULL) -+#define LPA_100 (LPA_100FULL | LPA_100HALF | LPA_100BASE4) -+ -+#define STAT_REMFAULT (1 << 4) /* remote fault */ -+#define STAT_LINK (1 << 2) /* link status */ -+#define STAT_JAB (1 << 1) /* jabber detected */ -+#define AUX_FORCED (1 << 2) /* forced 10/100 */ -+#define AUX_SPEED (1 << 1) /* speed 0=10mbps 1=100mbps */ -+#define AUX_DUPLEX (1 << 0) /* duplex 0=half 1=full */ -+ -+#endif /* _bcmenetphy_h_ */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/bcmenetrxh.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/bcmenetrxh.h ---- linux-2.4.32/arch/mips/bcm947xx/include/bcmenetrxh.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/bcmenetrxh.h 2005-12-16 23:39:10.700821500 +0100 -@@ -0,0 +1,43 @@ -+/* -+ * Hardware-specific Receive Data Header for the -+ * Broadcom Home Networking Division -+ * BCM44XX and BCM47XX 10/100 Mbps Ethernet cores. -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation; -+ * the contents of this file may not be disclosed to third parties, copied -+ * or duplicated in any form, in whole or in part, without the prior -+ * written permission of Broadcom Corporation. -+ * $Id$ -+ */ -+ -+#ifndef _bcmenetrxh_h_ -+#define _bcmenetrxh_h_ -+ -+/* -+ * The Ethernet MAC core returns an 8-byte Receive Frame Data Header -+ * with every frame consisting of -+ * 16bits of frame length, followed by -+ * 16bits of EMAC rx descriptor info, followed by 32bits of undefined. -+ */ -+typedef volatile struct { -+ uint16 len; -+ uint16 flags; -+ uint16 pad[12]; -+} bcmenetrxh_t; -+ -+#define RXHDR_LEN 28 -+ -+#define RXF_L ((uint16)1 << 11) /* last buffer in a frame */ -+#define RXF_MISS ((uint16)1 << 7) /* received due to promisc mode */ -+#define RXF_BRDCAST ((uint16)1 << 6) /* dest is broadcast address */ -+#define RXF_MULT ((uint16)1 << 5) /* dest is multicast address */ -+#define RXF_LG ((uint16)1 << 4) /* frame length > rxmaxlength */ -+#define RXF_NO ((uint16)1 << 3) /* odd number of nibbles */ -+#define RXF_RXER ((uint16)1 << 2) /* receive symbol error */ -+#define RXF_CRC ((uint16)1 << 1) /* crc error */ -+#define RXF_OV ((uint16)1 << 0) /* fifo overflow */ -+ -+#endif /* _bcmenetrxh_h_ */ diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/bcmnvram.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/bcmnvram.h --- linux-2.4.32/arch/mips/bcm947xx/include/bcmnvram.h 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/bcmnvram.h 2005-12-16 23:39:10.700821500 +0100 @@ -1766,35 +1339,6 @@ diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/bcmnvram.h linux-2.4.32-brcm/a +#define NVRAM_MAX_PARAM_LEN 64 + +#endif /* _bcmnvram_h_ */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/bcmparams.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/bcmparams.h ---- linux-2.4.32/arch/mips/bcm947xx/include/bcmparams.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/bcmparams.h 2005-12-16 23:39:10.700821500 +0100 -@@ -0,0 +1,25 @@ -+/* -+ * Misc system wide parameters. -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id$ -+ */ -+ -+#ifndef _bcmparams_h_ -+#define _bcmparams_h_ -+ -+#define VLAN_MAXVID 15 /* Max. VLAN ID supported/allowed */ -+ -+#define VLAN_NUMPRIS 8 /* # of prio, start from 0 */ -+ -+#define DEV_NUMIFS 16 /* Max. # of devices/interfaces supported */ -+ -+#define WL_MAXBSSCFG 16 /* maximum number of BSS Configs we can configure */ -+ -+#endif diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/bcmsrom.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/bcmsrom.h --- linux-2.4.32/arch/mips/bcm947xx/include/bcmsrom.h 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/bcmsrom.h 2005-12-16 23:39:10.704821750 +0100 @@ -2139,505 +1683,483 @@ diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/bcmutils.h linux-2.4.32-brcm/a +extern uint bcm_mkiovar(char *name, char *data, uint datalen, char *buf, uint len); + +#endif /* _bcmutils_h_ */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/bitfuncs.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/bitfuncs.h ---- linux-2.4.32/arch/mips/bcm947xx/include/bitfuncs.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/bitfuncs.h 2005-12-16 23:39:10.704821750 +0100 -@@ -0,0 +1,85 @@ +diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/hnddma.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/hnddma.h +--- linux-2.4.32/arch/mips/bcm947xx/include/hnddma.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/hnddma.h 2005-12-16 23:39:10.708822000 +0100 +@@ -0,0 +1,71 @@ +/* -+ * bit manipulation utility functions ++ * Generic Broadcom Home Networking Division (HND) DMA engine SW interface ++ * This supports the following chips: BCM42xx, 44xx, 47xx . + * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * $Id$ + */ + -+#ifndef _BITFUNCS_H -+#define _BITFUNCS_H -+ -+#include ++#ifndef _hnddma_h_ ++#define _hnddma_h_ + -+/* local prototypes */ -+static INLINE uint32 find_msbit(uint32 x); ++/* export structure */ ++typedef volatile struct { ++ /* rx error counters */ ++ uint rxgiants; /* rx giant frames */ ++ uint rxnobuf; /* rx out of dma descriptors */ ++ /* tx error counters */ ++ uint txnobuf; /* tx out of dma descriptors */ ++} hnddma_t; + ++#ifndef di_t ++#define di_t void ++#endif + -+/* -+ * find_msbit: returns index of most significant set bit in x, with index -+ * range defined as 0-31. NOTE: returns zero if input is zero. -+ */ ++#ifndef osl_t ++#define osl_t void ++#endif + -+#if defined(USE_PENTIUM_BSR) && defined(__GNUC__) ++/* externs */ ++extern void * dma_attach(osl_t *osh, char *name, sb_t *sbh, void *dmaregstx, void *dmaregsrx, ++ uint ntxd, uint nrxd, uint rxbufsize, uint nrxpost, uint rxoffset, uint *msg_level); ++extern void dma_detach(di_t *di); ++extern void dma_txreset(di_t *di); ++extern void dma_rxreset(di_t *di); ++extern void dma_txinit(di_t *di); ++extern bool dma_txenabled(di_t *di); ++extern void dma_rxinit(di_t *di); ++extern void dma_rxenable(di_t *di); ++extern bool dma_rxenabled(di_t *di); ++extern void dma_txsuspend(di_t *di); ++extern void dma_txresume(di_t *di); ++extern bool dma_txsuspended(di_t *di); ++extern bool dma_txsuspendedidle(di_t *di); ++extern bool dma_txstopped(di_t *di); ++extern bool dma_rxstopped(di_t *di); ++extern int dma_txfast(di_t *di, void *p, uint32 coreflags); ++extern void dma_fifoloopbackenable(di_t *di); ++extern void *dma_rx(di_t *di); ++extern void dma_rxfill(di_t *di); ++extern void dma_txreclaim(di_t *di, bool forceall); ++extern void dma_rxreclaim(di_t *di); ++extern uintptr dma_getvar(di_t *di, char *name); ++extern void *dma_getnexttxp(di_t *di, bool forceall); ++extern void *dma_peeknexttxp(di_t *di); ++extern void *dma_getnextrxp(di_t *di, bool forceall); ++extern void dma_txblock(di_t *di); ++extern void dma_txunblock(di_t *di); ++extern uint dma_txactive(di_t *di); ++extern void dma_txrotate(di_t *di); + -+/* -+ * Implementation for Pentium processors and gcc. Note that this -+ * instruction is actually very slow on some processors (e.g., family 5, -+ * model 2, stepping 12, "Pentium 75 - 200"), so we use the generic -+ * implementation instead. -+ */ -+static INLINE uint32 find_msbit(uint32 x) -+{ -+ uint msbit; -+ __asm__("bsrl %1,%0" -+ :"=r" (msbit) -+ :"r" (x)); -+ return msbit; -+} ++extern void dma_rxpiomode(dma32regs_t *); ++extern void dma_txpioloopback(dma32regs_t *); + -+#else + ++#endif /* _hnddma_h_ */ +diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/hndmips.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/hndmips.h +--- linux-2.4.32/arch/mips/bcm947xx/include/hndmips.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/hndmips.h 2005-12-16 23:39:10.708822000 +0100 +@@ -0,0 +1,16 @@ +/* -+ * Generic Implementation ++ * Alternate include file for HND sbmips.h since CFE also ships with ++ * a sbmips.h. ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ + */ + -+#define DB_POW_MASK16 0xffff0000 -+#define DB_POW_MASK8 0x0000ff00 -+#define DB_POW_MASK4 0x000000f0 -+#define DB_POW_MASK2 0x0000000c -+#define DB_POW_MASK1 0x00000002 -+ -+static INLINE uint32 find_msbit(uint32 x) -+{ -+ uint32 temp_x = x; -+ uint msbit = 0; -+ if (temp_x & DB_POW_MASK16) { -+ temp_x >>= 16; -+ msbit = 16; -+ } -+ if (temp_x & DB_POW_MASK8) { -+ temp_x >>= 8; -+ msbit += 8; -+ } -+ if (temp_x & DB_POW_MASK4) { -+ temp_x >>= 4; -+ msbit += 4; -+ } -+ if (temp_x & DB_POW_MASK2) { -+ temp_x >>= 2; -+ msbit += 2; -+ } -+ if (temp_x & DB_POW_MASK1) { -+ msbit += 1; -+ } -+ return(msbit); -+} -+ -+#endif -+ -+#endif /* _BITFUNCS_H */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/cfe_osl.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/cfe_osl.h ---- linux-2.4.32/arch/mips/bcm947xx/include/cfe_osl.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/cfe_osl.h 2005-12-16 23:39:10.704821750 +0100 -@@ -0,0 +1,191 @@ ++#include "sbmips.h" +diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/linux_osl.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/linux_osl.h +--- linux-2.4.32/arch/mips/bcm947xx/include/linux_osl.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/linux_osl.h 2005-12-16 23:39:10.708822000 +0100 +@@ -0,0 +1,371 @@ +/* -+ * CFE boot loader OS Abstraction Layer. ++ * Linux OS Independent Layer + * + * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation; -+ * the contents of this file may not be disclosed to third parties, copied -+ * or duplicated in any form, in whole or in part, without the prior -+ * written permission of Broadcom Corporation. ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + -+#ifndef _cfe_osl_h_ -+#define _cfe_osl_h_ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include ++#ifndef _linux_osl_h_ ++#define _linux_osl_h_ + +#include + -+/* dump string */ -+extern int (*xprinthook)(const char *str); -+#define puts(str) do { if (xprinthook) xprinthook(str); } while (0) ++/* use current 2.4.x calling conventions */ ++#include + +/* assert and panic */ ++#ifdef __GNUC__ ++#define GCC_VERSION (__GNUC__ * 10000 + __GNUC_MINOR__ * 100 + __GNUC_PATCHLEVEL__) ++#if GCC_VERSION > 30100 +#define ASSERT(exp) do {} while (0) ++#else ++/* ASSERT could causes segmentation fault on GCC3.1, use empty instead*/ ++#define ASSERT(exp) ++#endif ++#endif ++ ++/* microsecond delay */ ++#define OSL_DELAY(usec) osl_delay(usec) ++extern void osl_delay(uint usec); + +/* PCMCIA attribute space access macros */ ++#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE) ++struct pcmcia_dev { ++ dev_link_t link; /* PCMCIA device pointer */ ++ dev_node_t node; /* PCMCIA node structure */ ++ void *base; /* Mapped attribute memory window */ ++ size_t size; /* Size of window */ ++ void *drv; /* Driver data */ ++}; ++#endif +#define OSL_PCMCIA_READ_ATTR(osh, offset, buf, size) \ -+ bzero(buf, size) ++ osl_pcmcia_read_attr((osh), (offset), (buf), (size)) +#define OSL_PCMCIA_WRITE_ATTR(osh, offset, buf, size) \ -+ do {} while (0) ++ osl_pcmcia_write_attr((osh), (offset), (buf), (size)) ++extern void osl_pcmcia_read_attr(osl_t *osh, uint offset, void *buf, int size); ++extern void osl_pcmcia_write_attr(osl_t *osh, uint offset, void *buf, int size); + +/* PCI configuration space access macros */ -+#define OSL_PCI_READ_CONFIG(loc, offset, size) \ -+ (offset == 8 ? 0 : 0xffffffff) -+#define OSL_PCI_WRITE_CONFIG(loc, offset, size, val) \ -+ do {} while (0) ++#define OSL_PCI_READ_CONFIG(osh, offset, size) \ ++ osl_pci_read_config((osh), (offset), (size)) ++#define OSL_PCI_WRITE_CONFIG(osh, offset, size, val) \ ++ osl_pci_write_config((osh), (offset), (size), (val)) ++extern uint32 osl_pci_read_config(osl_t *osh, uint size, uint offset); ++extern void osl_pci_write_config(osl_t *osh, uint offset, uint size, uint val); + +/* PCI device bus # and slot # */ -+#define OSL_PCI_BUS(osh) (0) -+#define OSL_PCI_SLOT(osh) (0) ++#define OSL_PCI_BUS(osh) osl_pci_bus(osh) ++#define OSL_PCI_SLOT(osh) osl_pci_slot(osh) ++extern uint osl_pci_bus(osl_t *osh); ++extern uint osl_pci_slot(osl_t *osh); + -+/* register access macros */ -+#define wreg32(r, v) (*(volatile uint32*)(r) = (uint32)(v)) -+#define rreg32(r) (*(volatile uint32*)(r)) -+#ifdef IL_BIGENDIAN -+#define wreg16(r, v) (*(volatile uint16*)((ulong)(r)^2) = (uint16)(v)) -+#define rreg16(r) (*(volatile uint16*)((ulong)(r)^2)) -+#define wreg8(r, v) (*(volatile uint8*)((ulong)(r)^3) = (uint8)(v)) -+#define rreg8(r) (*(volatile uint8*)((ulong)(r)^3)) -+#else -+#define wreg16(r, v) (*(volatile uint16*)(r) = (uint16)(v)) -+#define rreg16(r) (*(volatile uint16*)(r)) -+#define wreg8(r, v) (*(volatile uint8*)(r) = (uint8)(v)) -+#define rreg8(r) (*(volatile uint8*)(r)) -+#endif -+#define R_REG(r) ({ \ -+ __typeof(*(r)) __osl_v; \ -+ switch (sizeof(*(r))) { \ -+ case sizeof(uint8): __osl_v = rreg8((r)); break; \ -+ case sizeof(uint16): __osl_v = rreg16((r)); break; \ -+ case sizeof(uint32): __osl_v = rreg32((r)); break; \ -+ } \ -+ __osl_v; \ -+}) -+#define W_REG(r, v) do { \ -+ switch (sizeof(*(r))) { \ -+ case sizeof(uint8): wreg8((r), (v)); break; \ -+ case sizeof(uint16): wreg16((r), (v)); break; \ -+ case sizeof(uint32): wreg32((r), (v)); break; \ -+ } \ -+} while (0) -+#define AND_REG(r, v) W_REG((r), R_REG(r) & (v)) -+#define OR_REG(r, v) W_REG((r), R_REG(r) | (v)) -+ -+/* bcopy, bcmp, and bzero */ -+#define bcmp(b1, b2, len) lib_memcmp((b1), (b2), (len)) ++/* OSL initialization */ ++extern osl_t *osl_attach(void *pdev); ++extern void osl_detach(osl_t *osh); + -+#define osl_attach(pdev) ((osl_t*)pdev) -+#define osl_detach(osh) ++/* host/bus architecture-specific byte swap */ ++#define BUS_SWAP32(v) (v) + +/* general purpose memory allocation */ -+#define MALLOC(osh, size) KMALLOC((size),0) -+#define MFREE(osh, addr, size) KFREE((addr)) -+#define MALLOCED(osh) (0) -+#define MALLOC_DUMP(osh, buf, sz) -+#define MALLOC_FAILED(osh) (0) + -+/* uncached virtual address */ -+#define OSL_UNCACHED(va) ((void*)UNCADDR((ulong)(va))) ++#if defined(BCMDBG_MEM) + -+/* host/bus architecture-specific address byte swap */ -+#define BUS_SWAP32(v) (v) ++#define MALLOC(osh, size) osl_debug_malloc((osh), (size), __LINE__, __FILE__) ++#define MFREE(osh, addr, size) osl_debug_mfree((osh), (addr), (size), __LINE__, __FILE__) ++#define MALLOCED(osh) osl_malloced((osh)) ++#define MALLOC_DUMP(osh, buf, sz) osl_debug_memdump((osh), (buf), (sz)) ++extern void *osl_debug_malloc(osl_t *osh, uint size, int line, char* file); ++extern void osl_debug_mfree(osl_t *osh, void *addr, uint size, int line, char* file); ++extern char *osl_debug_memdump(osl_t *osh, char *buf, uint sz); + -+/* get processor cycle count */ -+#define OSL_GETCYCLES(x) ((x) = 0) ++#else + -+/* microsecond delay */ -+#define OSL_DELAY(usec) cfe_usleep((cfe_cpu_speed/CPUCFG_CYCLESPERCPUTICK/1000000*(usec))) ++#define MALLOC(osh, size) osl_malloc((osh), (size)) ++#define MFREE(osh, addr, size) osl_mfree((osh), (addr), (size)) ++#define MALLOCED(osh) osl_malloced((osh)) + -+#define OSL_ERROR(bcmerror) osl_error(bcmerror) ++#endif /* BCMDBG_MEM */ + -+/* map/unmap physical to virtual I/O */ -+#define REG_MAP(pa, size) ((void*)UNCADDR((ulong)(pa))) -+#define REG_UNMAP(va) do {} while (0) ++#define MALLOC_FAILED(osh) osl_malloc_failed((osh)) + -+/* dereference an address that may cause a bus exception */ -+#define BUSPROBE(val, addr) osl_busprobe(&(val), (uint32)(addr)) -+extern int osl_busprobe(uint32 *val, uint32 addr); ++extern void *osl_malloc(osl_t *osh, uint size); ++extern void osl_mfree(osl_t *osh, void *addr, uint size); ++extern uint osl_malloced(osl_t *osh); ++extern uint osl_malloc_failed(osl_t *osh); + -+/* allocate/free shared (dma-able) consistent (uncached) memory */ -+#define DMA_CONSISTENT_ALIGN 4096 ++/* allocate/free shared (dma-able) consistent memory */ ++#define DMA_CONSISTENT_ALIGN PAGE_SIZE +#define DMA_ALLOC_CONSISTENT(osh, size, pap) \ -+ osl_dma_alloc_consistent((size), (pap)) ++ osl_dma_alloc_consistent((osh), (size), (pap)) +#define DMA_FREE_CONSISTENT(osh, va, size, pa) \ -+ osl_dma_free_consistent((void*)(va)) -+extern void *osl_dma_alloc_consistent(uint size, ulong *pap); -+extern void osl_dma_free_consistent(void *va); ++ osl_dma_free_consistent((osh), (void*)(va), (size), (pa)) ++extern void *osl_dma_alloc_consistent(osl_t *osh, uint size, ulong *pap); ++extern void osl_dma_free_consistent(osl_t *osh, void *va, uint size, ulong pa); + +/* map/unmap direction */ -+#define DMA_TX 1 -+#define DMA_RX 2 ++#define DMA_TX 1 ++#define DMA_RX 2 + +/* map/unmap shared (dma-able) memory */ -+#define DMA_MAP(osh, va, size, direction, lb) ({ \ -+ cfe_flushcache(CFE_CACHE_FLUSH_D); \ -+ PHYSADDR((ulong)(va)); \ -+}) ++#define DMA_MAP(osh, va, size, direction, p) \ ++ osl_dma_map((osh), (va), (size), (direction)) +#define DMA_UNMAP(osh, pa, size, direction, p) \ -+ do {} while (0) -+ -+/* shared (dma-able) memory access macros */ -+#define R_SM(r) *(r) -+#define W_SM(r, v) (*(r) = (v)) -+#define BZERO_SM(r, len) lib_memset((r), '\0', (len)) -+ -+/* generic packet structure */ -+#define LBUFSZ 4096 -+#define LBDATASZ (LBUFSZ - sizeof(struct lbuf)) -+struct lbuf { -+ struct lbuf *next; /* pointer to next lbuf if in a chain */ -+ struct lbuf *link; /* pointer to next lbuf if in a list */ -+ uchar *head; /* start of buffer */ -+ uchar *end; /* end of buffer */ -+ uchar *data; /* start of data */ -+ uchar *tail; /* end of data */ -+ uint len; /* nbytes of data */ -+ void *cookie; /* generic cookie */ -+}; -+ -+/* the largest reasonable packet buffer driver uses for ethernet MTU in bytes */ -+#define PKTBUFSZ 2048 ++ osl_dma_unmap((osh), (pa), (size), (direction)) ++extern uint osl_dma_map(osl_t *osh, void *va, uint size, int direction); ++extern void osl_dma_unmap(osl_t *osh, uint pa, uint size, int direction); + -+/* packet primitives */ -+#define PKTGET(osh, len, send) ((void*)osl_pktget((len))) -+#define PKTFREE(osh, lb, send) osl_pktfree((struct lbuf*)(lb)) -+#define PKTDATA(osh, lb) (((struct lbuf*)(lb))->data) -+#define PKTLEN(osh, lb) (((struct lbuf*)(lb))->len) -+#define PKTHEADROOM(osh, lb) (PKTDATA(osh,lb)-(((struct lbuf*)(lb))->head)) -+#define PKTTAILROOM(osh, lb) ((((struct lbuf*)(lb))->end)-(((struct lbuf*)(lb))->tail)) -+#define PKTNEXT(osh, lb) (((struct lbuf*)(lb))->next) -+#define PKTSETNEXT(lb, x) (((struct lbuf*)(lb))->next = (struct lbuf*)(x)) -+#define PKTSETLEN(osh, lb, len) osl_pktsetlen((struct lbuf*)(lb), (len)) -+#define PKTPUSH(osh, lb, bytes) osl_pktpush((struct lbuf*)(lb), (bytes)) -+#define PKTPULL(osh, lb, bytes) osl_pktpull((struct lbuf*)(lb), (bytes)) -+#define PKTDUP(osh, lb) osl_pktdup((struct lbuf*)(lb)) -+#define PKTCOOKIE(lb) (((struct lbuf*)(lb))->cookie) -+#define PKTSETCOOKIE(lb, x) (((struct lbuf*)(lb))->cookie = (void*)(x)) -+#define PKTLINK(lb) (((struct lbuf*)(lb))->link) -+#define PKTSETLINK(lb, x) (((struct lbuf*)(lb))->link = (struct lbuf*)(x)) -+#define PKTPRIO(lb) (0) -+#define PKTSETPRIO(lb, x) do {} while (0) -+extern struct lbuf *osl_pktget(uint len); -+extern void osl_pktfree(struct lbuf *lb); -+extern void osl_pktsetlen(struct lbuf *lb, uint len); -+extern uchar *osl_pktpush(struct lbuf *lb, uint bytes); -+extern uchar *osl_pktpull(struct lbuf *lb, uint bytes); -+extern struct lbuf *osl_pktdup(struct lbuf *lb); -+extern int osl_error(int bcmerror); ++/* register access macros */ ++#if defined(BCMJTAG) ++#include ++#define R_REG(r) bcmjtag_read(NULL, (uint32)(r), sizeof (*(r))) ++#define W_REG(r, v) bcmjtag_write(NULL, (uint32)(r), (uint32)(v), sizeof (*(r))) ++#endif + -+#endif /* _cfe_osl_h_ */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/epivers.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/epivers.h ---- linux-2.4.32/arch/mips/bcm947xx/include/epivers.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/epivers.h 2005-12-16 23:39:10.704821750 +0100 -@@ -0,0 +1,69 @@ +/* -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ -+ * -+*/ ++ * BINOSL selects the slightly slower function-call-based binary compatible osl. ++ * Macros expand to calls to functions defined in linux_osl.c . ++ */ ++#ifndef BINOSL + -+#ifndef _epivers_h_ -+#define _epivers_h_ ++/* string library, kernel mode */ ++#define printf(fmt, args...) printk(fmt, ## args) ++#include ++#include + -+#ifdef linux -+#include ++/* register access macros */ ++#if !defined(BCMJTAG) ++#ifndef IL_BIGENDIAN ++#define R_REG(r) ( \ ++ sizeof(*(r)) == sizeof(uint8) ? readb((volatile uint8*)(r)) : \ ++ sizeof(*(r)) == sizeof(uint16) ? readw((volatile uint16*)(r)) : \ ++ readl((volatile uint32*)(r)) \ ++) ++#define W_REG(r, v) do { \ ++ switch (sizeof(*(r))) { \ ++ case sizeof(uint8): writeb((uint8)(v), (volatile uint8*)(r)); break; \ ++ case sizeof(uint16): writew((uint16)(v), (volatile uint16*)(r)); break; \ ++ case sizeof(uint32): writel((uint32)(v), (volatile uint32*)(r)); break; \ ++ } \ ++} while (0) ++#else /* IL_BIGENDIAN */ ++#define R_REG(r) ({ \ ++ __typeof(*(r)) __osl_v; \ ++ switch (sizeof(*(r))) { \ ++ case sizeof(uint8): __osl_v = readb((volatile uint8*)((uint32)r^3)); break; \ ++ case sizeof(uint16): __osl_v = readw((volatile uint16*)((uint32)r^2)); break; \ ++ case sizeof(uint32): __osl_v = readl((volatile uint32*)(r)); break; \ ++ } \ ++ __osl_v; \ ++}) ++#define W_REG(r, v) do { \ ++ switch (sizeof(*(r))) { \ ++ case sizeof(uint8): writeb((uint8)(v), (volatile uint8*)((uint32)r^3)); break; \ ++ case sizeof(uint16): writew((uint16)(v), (volatile uint16*)((uint32)r^2)); break; \ ++ case sizeof(uint32): writel((uint32)(v), (volatile uint32*)(r)); break; \ ++ } \ ++} while (0) +#endif -+ -+/* Vendor Name, ASCII, 32 chars max */ -+#ifdef COMPANYNAME -+#define HPNA_VENDOR COMPANYNAME -+#else -+#define HPNA_VENDOR "Broadcom Corporation" +#endif + -+/* Driver Date, ASCII, 32 chars max */ -+#define HPNA_DRV_BUILD_DATE __DATE__ -+ -+/* Hardware Manufacture Date, ASCII, 32 chars max */ -+#define HPNA_HW_MFG_DATE "Not Specified" -+ -+/* See documentation for Device Type values, 32 values max */ -+#ifndef HPNA_DEV_TYPE -+ -+#if defined(CONFIG_BRCM_VJ) -+#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_DISPLAY } ++#define AND_REG(r, v) W_REG((r), R_REG(r) & (v)) ++#define OR_REG(r, v) W_REG((r), R_REG(r) | (v)) + -+#elif defined(CONFIG_BCRM_93725) -+#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_CM_BRIDGE, CDCF_V0_DEVICE_DISPLAY } ++/* bcopy, bcmp, and bzero */ ++#define bcopy(src, dst, len) memcpy((dst), (src), (len)) ++#define bcmp(b1, b2, len) memcmp((b1), (b2), (len)) ++#define bzero(b, len) memset((b), '\0', (len)) + ++/* uncached virtual address */ ++#ifdef mips ++#define OSL_UNCACHED(va) KSEG1ADDR((va)) ++#include +#else -+#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_PCINIC } -+ ++#define OSL_UNCACHED(va) (va) +#endif + -+#endif /* !HPNA_DEV_TYPE */ -+ -+ -+#define EPI_MAJOR_VERSION 3 -+ -+#define EPI_MINOR_VERSION 130 -+ -+#define EPI_RC_NUMBER 20 -+ -+#define EPI_INCREMENTAL_NUMBER 0 -+ -+#define EPI_BUILD_NUMBER 0 -+ -+#define EPI_VERSION 3,130,20,0 -+ -+#define EPI_VERSION_NUM 0x03821400 -+ -+/* Driver Version String, ASCII, 32 chars max */ -+#define EPI_VERSION_STR "3.130.20.0" -+#define EPI_ROUTER_VERSION_STR "3.131.20.0" -+ -+#endif /* _epivers_h_ */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/epivers.h.in linux-2.4.32-brcm/arch/mips/bcm947xx/include/epivers.h.in ---- linux-2.4.32/arch/mips/bcm947xx/include/epivers.h.in 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/epivers.h.in 2005-12-16 23:39:10.704821750 +0100 -@@ -0,0 +1,69 @@ -+/* -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ -+ * -+*/ -+ -+#ifndef _epivers_h_ -+#define _epivers_h_ -+ -+#ifdef linux -+#include ++/* get processor cycle count */ ++#if defined(mips) ++#define OSL_GETCYCLES(x) ((x) = read_c0_count() * 2) ++#elif defined(__i386__) ++#define OSL_GETCYCLES(x) rdtscl((x)) ++#else ++#define OSL_GETCYCLES(x) ((x) = 0) +#endif + -+/* Vendor Name, ASCII, 32 chars max */ -+#ifdef COMPANYNAME -+#define HPNA_VENDOR COMPANYNAME ++/* dereference an address that may cause a bus exception */ ++#ifdef mips ++#if defined(MODULE) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,17)) ++#define BUSPROBE(val, addr) panic("get_dbe() will not fixup a bus exception when compiled into a module") +#else -+#define HPNA_VENDOR "Broadcom Corporation" ++#define BUSPROBE(val, addr) get_dbe((val), (addr)) ++#include +#endif -+ -+/* Driver Date, ASCII, 32 chars max */ -+#define HPNA_DRV_BUILD_DATE __DATE__ -+ -+/* Hardware Manufacture Date, ASCII, 32 chars max */ -+#define HPNA_HW_MFG_DATE "Not Specified" -+ -+/* See documentation for Device Type values, 32 values max */ -+#ifndef HPNA_DEV_TYPE -+ -+#if defined(CONFIG_BRCM_VJ) -+#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_DISPLAY } -+ -+#elif defined(CONFIG_BCRM_93725) -+#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_CM_BRIDGE, CDCF_V0_DEVICE_DISPLAY } -+ +#else -+#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_PCINIC } -+ ++#define BUSPROBE(val, addr) ({ (val) = R_REG((addr)); 0; }) +#endif + -+#endif /* !HPNA_DEV_TYPE */ -+ -+ -+#define EPI_MAJOR_VERSION @EPI_MAJOR_VERSION@ -+ -+#define EPI_MINOR_VERSION @EPI_MINOR_VERSION@ -+ -+#define EPI_RC_NUMBER @EPI_RC_NUMBER@ ++/* map/unmap physical to virtual I/O */ ++#define REG_MAP(pa, size) ioremap_nocache((unsigned long)(pa), (unsigned long)(size)) ++#define REG_UNMAP(va) iounmap((void *)(va)) + -+#define EPI_INCREMENTAL_NUMBER @EPI_INCREMENTAL_NUMBER@ ++/* shared (dma-able) memory access macros */ ++#define R_SM(r) *(r) ++#define W_SM(r, v) (*(r) = (v)) ++#define BZERO_SM(r, len) memset((r), '\0', (len)) + -+#define EPI_BUILD_NUMBER @EPI_BUILD_NUMBER@ ++/* packet primitives */ ++#define PKTGET(osh, len, send) osl_pktget((osh), (len), (send)) ++#define PKTFREE(osh, skb, send) osl_pktfree((skb)) ++#define PKTDATA(osh, skb) (((struct sk_buff*)(skb))->data) ++#define PKTLEN(osh, skb) (((struct sk_buff*)(skb))->len) ++#define PKTHEADROOM(osh, skb) (PKTDATA(osh,skb)-(((struct sk_buff*)(skb))->head)) ++#define PKTTAILROOM(osh, skb) ((((struct sk_buff*)(skb))->end)-(((struct sk_buff*)(skb))->tail)) ++#define PKTNEXT(osh, skb) (((struct sk_buff*)(skb))->next) ++#define PKTSETNEXT(skb, x) (((struct sk_buff*)(skb))->next = (struct sk_buff*)(x)) ++#define PKTSETLEN(osh, skb, len) __skb_trim((struct sk_buff*)(skb), (len)) ++#define PKTPUSH(osh, skb, bytes) skb_push((struct sk_buff*)(skb), (bytes)) ++#define PKTPULL(osh, skb, bytes) skb_pull((struct sk_buff*)(skb), (bytes)) ++#define PKTDUP(osh, skb) skb_clone((struct sk_buff*)(skb), GFP_ATOMIC) ++#define PKTCOOKIE(skb) ((void*)((struct sk_buff*)(skb))->csum) ++#define PKTSETCOOKIE(skb, x) (((struct sk_buff*)(skb))->csum = (uint)(x)) ++#define PKTLINK(skb) (((struct sk_buff*)(skb))->prev) ++#define PKTSETLINK(skb, x) (((struct sk_buff*)(skb))->prev = (struct sk_buff*)(x)) ++#define PKTPRIO(skb) (((struct sk_buff*)(skb))->priority) ++#define PKTSETPRIO(skb, x) (((struct sk_buff*)(skb))->priority = (x)) ++extern void *osl_pktget(osl_t *osh, uint len, bool send); ++extern void osl_pktfree(void *skb); + -+#define EPI_VERSION @EPI_VERSION@ ++#else /* BINOSL */ + -+#define EPI_VERSION_NUM @EPI_VERSION_NUM@ ++/* string library */ ++#ifndef LINUX_OSL ++#undef printf ++#define printf(fmt, args...) osl_printf((fmt), ## args) ++#undef sprintf ++#define sprintf(buf, fmt, args...) osl_sprintf((buf), (fmt), ## args) ++#undef strcmp ++#define strcmp(s1, s2) osl_strcmp((s1), (s2)) ++#undef strncmp ++#define strncmp(s1, s2, n) osl_strncmp((s1), (s2), (n)) ++#undef strlen ++#define strlen(s) osl_strlen((s)) ++#undef strcpy ++#define strcpy(d, s) osl_strcpy((d), (s)) ++#undef strncpy ++#define strncpy(d, s, n) osl_strncpy((d), (s), (n)) ++#endif ++extern int osl_printf(const char *format, ...); ++extern int osl_sprintf(char *buf, const char *format, ...); ++extern int osl_strcmp(const char *s1, const char *s2); ++extern int osl_strncmp(const char *s1, const char *s2, uint n); ++extern int osl_strlen(const char *s); ++extern char* osl_strcpy(char *d, const char *s); ++extern char* osl_strncpy(char *d, const char *s, uint n); + -+/* Driver Version String, ASCII, 32 chars max */ -+#define EPI_VERSION_STR "@EPI_VERSION_STR@" -+#define EPI_ROUTER_VERSION_STR "@EPI_ROUTER_VERSION_STR@" ++/* register access macros */ ++#if !defined(BCMJTAG) ++#define R_REG(r) ( \ ++ sizeof(*(r)) == sizeof(uint8) ? osl_readb((volatile uint8*)(r)) : \ ++ sizeof(*(r)) == sizeof(uint16) ? osl_readw((volatile uint16*)(r)) : \ ++ osl_readl((volatile uint32*)(r)) \ ++) ++#define W_REG(r, v) do { \ ++ switch (sizeof(*(r))) { \ ++ case sizeof(uint8): osl_writeb((uint8)(v), (volatile uint8*)(r)); break; \ ++ case sizeof(uint16): osl_writew((uint16)(v), (volatile uint16*)(r)); break; \ ++ case sizeof(uint32): osl_writel((uint32)(v), (volatile uint32*)(r)); break; \ ++ } \ ++} while (0) ++#endif + -+#endif /* _epivers_h_ */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/etsockio.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/etsockio.h ---- linux-2.4.32/arch/mips/bcm947xx/include/etsockio.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/etsockio.h 2005-12-16 23:39:10.704821750 +0100 -@@ -0,0 +1,59 @@ -+/* -+ * Driver-specific socket ioctls -+ * used by BSD, Linux, and PSOS -+ * Broadcom BCM44XX 10/100Mbps Ethernet Device Driver -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ -+ */ ++#define AND_REG(r, v) W_REG((r), R_REG(r) & (v)) ++#define OR_REG(r, v) W_REG((r), R_REG(r) | (v)) ++extern uint8 osl_readb(volatile uint8 *r); ++extern uint16 osl_readw(volatile uint16 *r); ++extern uint32 osl_readl(volatile uint32 *r); ++extern void osl_writeb(uint8 v, volatile uint8 *r); ++extern void osl_writew(uint16 v, volatile uint16 *r); ++extern void osl_writel(uint32 v, volatile uint32 *r); + -+#ifndef _etsockio_h_ -+#define _etsockio_h_ ++/* bcopy, bcmp, and bzero */ ++extern void bcopy(const void *src, void *dst, int len); ++extern int bcmp(const void *b1, const void *b2, int len); ++extern void bzero(void *b, int len); + -+/* THESE MUST BE CONTIGUOUS AND CONSISTENT WITH VALUES IN ETC.H */ ++/* uncached virtual address */ ++#define OSL_UNCACHED(va) osl_uncached((va)) ++extern void *osl_uncached(void *va); + ++/* get processor cycle count */ ++#define OSL_GETCYCLES(x) ((x) = osl_getcycles()) ++extern uint osl_getcycles(void); + -+#if defined(linux) -+#define SIOCSETCUP (SIOCDEVPRIVATE + 0) -+#define SIOCSETCDOWN (SIOCDEVPRIVATE + 1) -+#define SIOCSETCLOOP (SIOCDEVPRIVATE + 2) -+#define SIOCGETCDUMP (SIOCDEVPRIVATE + 3) -+#define SIOCSETCSETMSGLEVEL (SIOCDEVPRIVATE + 4) -+#define SIOCSETCPROMISC (SIOCDEVPRIVATE + 5) -+#define SIOCSETCTXDOWN (SIOCDEVPRIVATE + 6) /* obsolete */ -+#define SIOCSETCSPEED (SIOCDEVPRIVATE + 7) -+#define SIOCTXGEN (SIOCDEVPRIVATE + 8) -+#define SIOCGETCPHYRD (SIOCDEVPRIVATE + 9) -+#define SIOCSETCPHYWR (SIOCDEVPRIVATE + 10) -+#define SIOCSETCQOS (SIOCDEVPRIVATE + 11) -+ -+#else /* !linux */ -+ -+#define SIOCSETCUP _IOWR('e', 130 + 0, struct ifreq) -+#define SIOCSETCDOWN _IOWR('e', 130 + 1, struct ifreq) -+#define SIOCSETCLOOP _IOWR('e', 130 + 2, struct ifreq) -+#define SIOCGETCDUMP _IOWR('e', 130 + 3, struct ifreq) -+#define SIOCSETCSETMSGLEVEL _IOWR('e', 130 + 4, struct ifreq) -+#define SIOCSETCPROMISC _IOWR('e', 130 + 5, struct ifreq) -+#define SIOCSETCTXDOWN _IOWR('e', 130 + 6, struct ifreq) /* obsolete */ -+#define SIOCSETCSPEED _IOWR('e', 130 + 7, struct ifreq) -+#define SIOCTXGEN _IOWR('e', 130 + 8, struct ifreq) ++/* dereference an address that may target abort */ ++#define BUSPROBE(val, addr) osl_busprobe(&(val), (addr)) ++extern int osl_busprobe(uint32 *val, uint32 addr); + -+#endif ++/* map/unmap physical to virtual */ ++#define REG_MAP(pa, size) osl_reg_map((pa), (size)) ++#define REG_UNMAP(va) osl_reg_unmap((va)) ++extern void *osl_reg_map(uint32 pa, uint size); ++extern void osl_reg_unmap(void *va); + -+/* arg to SIOCTXGEN */ -+struct txg { -+ uint32 num; /* number of frames to send */ -+ uint32 delay; /* delay in microseconds between sending each */ -+ uint32 size; /* size of ether frame to send */ -+ uchar buf[1514]; /* starting ether frame data */ -+}; ++/* shared (dma-able) memory access macros */ ++#define R_SM(r) *(r) ++#define W_SM(r, v) (*(r) = (v)) ++#define BZERO_SM(r, len) bzero((r), (len)) + -+#endif -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/flash.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/flash.h ---- linux-2.4.32/arch/mips/bcm947xx/include/flash.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/flash.h 2005-12-16 23:39:10.704821750 +0100 -@@ -0,0 +1,188 @@ ++/* packet primitives */ ++#define PKTGET(osh, len, send) osl_pktget((osh), (len), (send)) ++#define PKTFREE(osh, skb, send) osl_pktfree((skb)) ++#define PKTDATA(osh, skb) osl_pktdata((osh), (skb)) ++#define PKTLEN(osh, skb) osl_pktlen((osh), (skb)) ++#define PKTHEADROOM(osh, skb) osl_pktheadroom((osh), (skb)) ++#define PKTTAILROOM(osh, skb) osl_pkttailroom((osh), (skb)) ++#define PKTNEXT(osh, skb) osl_pktnext((osh), (skb)) ++#define PKTSETNEXT(skb, x) osl_pktsetnext((skb), (x)) ++#define PKTSETLEN(osh, skb, len) osl_pktsetlen((osh), (skb), (len)) ++#define PKTPUSH(osh, skb, bytes) osl_pktpush((osh), (skb), (bytes)) ++#define PKTPULL(osh, skb, bytes) osl_pktpull((osh), (skb), (bytes)) ++#define PKTDUP(osh, skb) osl_pktdup((osh), (skb)) ++#define PKTCOOKIE(skb) osl_pktcookie((skb)) ++#define PKTSETCOOKIE(skb, x) osl_pktsetcookie((skb), (x)) ++#define PKTLINK(skb) osl_pktlink((skb)) ++#define PKTSETLINK(skb, x) osl_pktsetlink((skb), (x)) ++#define PKTPRIO(skb) osl_pktprio((skb)) ++#define PKTSETPRIO(skb, x) osl_pktsetprio((skb), (x)) ++extern void *osl_pktget(osl_t *osh, uint len, bool send); ++extern void osl_pktfree(void *skb); ++extern uchar *osl_pktdata(osl_t *osh, void *skb); ++extern uint osl_pktlen(osl_t *osh, void *skb); ++extern uint osl_pktheadroom(osl_t *osh, void *skb); ++extern uint osl_pkttailroom(osl_t *osh, void *skb); ++extern void *osl_pktnext(osl_t *osh, void *skb); ++extern void osl_pktsetnext(void *skb, void *x); ++extern void osl_pktsetlen(osl_t *osh, void *skb, uint len); ++extern uchar *osl_pktpush(osl_t *osh, void *skb, int bytes); ++extern uchar *osl_pktpull(osl_t *osh, void *skb, int bytes); ++extern void *osl_pktdup(osl_t *osh, void *skb); ++extern void *osl_pktcookie(void *skb); ++extern void osl_pktsetcookie(void *skb, void *x); ++extern void *osl_pktlink(void *skb); ++extern void osl_pktsetlink(void *skb, void *x); ++extern uint osl_pktprio(void *skb); ++extern void osl_pktsetprio(void *skb, uint x); ++ ++#endif /* BINOSL */ ++ ++#define OSL_ERROR(bcmerror) osl_error(bcmerror) ++extern int osl_error(int bcmerror); ++ ++/* the largest reasonable packet buffer driver uses for ethernet MTU in bytes */ ++#define PKTBUFSZ 2048 ++ ++#endif /* _linux_osl_h_ */ +diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/linuxver.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/linuxver.h +--- linux-2.4.32/arch/mips/bcm947xx/include/linuxver.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/linuxver.h 2005-12-16 23:39:10.748824500 +0100 +@@ -0,0 +1,411 @@ +/* -+ * flash.h: Common definitions for flash access. ++ * Linux-specific abstractions to gain some independence from linux kernel versions. ++ * Pave over some 2.2 versus 2.4 versus 2.6 kernel differences. + * + * Copyright 2005, Broadcom Corporation + * All Rights Reserved. @@ -2646,2481 +2168,969 @@ diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/flash.h linux-2.4.32-brcm/arch + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * ++ * + * $Id$ + */ + -+/* Types of flashes we know about */ -+typedef enum _flash_type {OLD, BSC, SCS, AMD, SST, SFLASH} flash_type_t; -+ -+/* Commands to write/erase the flases */ -+typedef struct _flash_cmds{ -+ flash_type_t type; -+ bool need_unlock; -+ uint16 pre_erase; -+ uint16 erase_block; -+ uint16 erase_chip; -+ uint16 write_word; -+ uint16 write_buf; -+ uint16 clear_csr; -+ uint16 read_csr; -+ uint16 read_id; -+ uint16 confirm; -+ uint16 read_array; -+} flash_cmds_t; -+ -+#define UNLOCK_CMD_WORDS 2 -+ -+typedef struct _unlock_cmd { -+ uint addr[UNLOCK_CMD_WORDS]; -+ uint16 cmd[UNLOCK_CMD_WORDS]; -+} unlock_cmd_t; -+ -+/* Flash descriptors */ -+typedef struct _flash_desc { -+ uint16 mfgid; /* Manufacturer Id */ -+ uint16 devid; /* Device Id */ -+ uint size; /* Total size in bytes */ -+ uint width; /* Device width in bytes */ -+ flash_type_t type; /* Device type old, S, J */ -+ uint bsize; /* Block size */ -+ uint nb; /* Number of blocks */ -+ uint ff; /* First full block */ -+ uint lf; /* Last full block */ -+ uint nsub; /* Number of subblocks */ -+ uint *subblocks; /* Offsets for subblocks */ -+ char *desc; /* Description */ -+} flash_desc_t; -+ -+ -+#ifdef DECLARE_FLASHES -+flash_cmds_t sflash_cmd_t = -+ { SFLASH, 0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; -+ -+flash_cmds_t flash_cmds[] = { -+/* type needu preera eraseb erasech write wbuf clcsr rdcsr rdid confrm read */ -+ { BSC, 0, 0x00, 0x20, 0x00, 0x40, 0x00, 0x50, 0x70, 0x90, 0xd0, 0xff }, -+ { SCS, 0, 0x00, 0x20, 0x00, 0x40, 0xe8, 0x50, 0x70, 0x90, 0xd0, 0xff }, -+ { AMD, 1, 0x80, 0x30, 0x10, 0xa0, 0x00, 0x00, 0x00, 0x90, 0x00, 0xf0 }, -+ { SST, 1, 0x80, 0x50, 0x10, 0xa0, 0x00, 0x00, 0x00, 0x90, 0x00, 0xf0 }, -+ { 0 } -+}; ++#ifndef _linuxver_h_ ++#define _linuxver_h_ + -+unlock_cmd_t unlock_cmd_amd = { -+#ifdef MIPSEB -+/* addr: */ { 0x0aa8, 0x0556}, -+#else -+/* addr: */ { 0x0aaa, 0x0554}, -+#endif -+/* data: */ { 0xaa, 0x55} -+}; ++#include ++#include + -+unlock_cmd_t unlock_cmd_sst = { -+#ifdef MIPSEB -+/* addr: */ { 0xaaa8, 0x5556}, ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,0)) ++/* __NO_VERSION__ must be defined for all linkables except one in 2.2 */ ++#ifdef __UNDEF_NO_VERSION__ ++#undef __NO_VERSION__ +#else -+/* addr: */ { 0xaaaa, 0x5554}, ++#define __NO_VERSION__ ++#endif +#endif -+/* data: */ { 0xaa, 0x55} -+}; -+ -+#define AMD_CMD 0xaaa -+#define SST_CMD 0xaaaa + -+/* intel unlock block cmds */ -+#define INTEL_UNLOCK1 0x60 -+#define INTEL_UNLOCK2 0xD0 ++#if defined(MODULE) && defined(MODVERSIONS) ++#include ++#endif + -+/* Just eight blocks of 8KB byte each */ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) ++#include ++#endif + -+uint blk8x8k[] = { 0x00000000, -+ 0x00002000, -+ 0x00004000, -+ 0x00006000, -+ 0x00008000, -+ 0x0000a000, -+ 0x0000c000, -+ 0x0000e000, -+ 0x00010000 -+}; + -+/* Funky AMD arrangement for 29xx800's */ -+uint amd800[] = { 0x00000000, /* 16KB */ -+ 0x00004000, /* 32KB */ -+ 0x0000c000, /* 8KB */ -+ 0x0000e000, /* 8KB */ -+ 0x00010000, /* 8KB */ -+ 0x00012000, /* 8KB */ -+ 0x00014000, /* 32KB */ -+ 0x0001c000, /* 16KB */ -+ 0x00020000 -+}; ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) ++#define module_param(_name_, _type_, _perm_) MODULE_PARM(_name_, "i") ++#define module_param_string(_name_, _string_, _size_, _perm_) MODULE_PARM(_string_, "c" __MODULE_STRING(_size_)) ++#endif + -+/* AMD arrangement for 29xx160's */ -+uint amd4112[] = { 0x00000000, /* 32KB */ -+ 0x00008000, /* 8KB */ -+ 0x0000a000, /* 8KB */ -+ 0x0000c000, /* 16KB */ -+ 0x00010000 -+}; -+uint amd2114[] = { 0x00000000, /* 16KB */ -+ 0x00004000, /* 8KB */ -+ 0x00006000, /* 8KB */ -+ 0x00008000, /* 32KB */ -+ 0x00010000 -+}; ++/* linux/malloc.h is deprecated, use linux/slab.h instead. */ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,9)) ++#include ++#else ++#include ++#endif + ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include + -+flash_desc_t sflash_desc = -+ { 0, 0, 0, 0, SFLASH, 0, 0, 0, 0, 0, NULL, "SFLASH" }; -+ -+flash_desc_t flashes[] = { -+ { 0x00b0, 0x00d0, 0x0200000, 2, SCS, 0x10000, 32, 0, 31, 0, NULL, "Intel 28F160S3/5 1Mx16" }, -+ { 0x00b0, 0x00d4, 0x0400000, 2, SCS, 0x10000, 64, 0, 63, 0, NULL, "Intel 28F320S3/5 2Mx16" }, -+ { 0x0089, 0x8890, 0x0200000, 2, BSC, 0x10000, 32, 0, 30, 8, blk8x8k, "Intel 28F160B3 1Mx16 TopB" }, -+ { 0x0089, 0x8891, 0x0200000, 2, BSC, 0x10000, 32, 1, 31, 8, blk8x8k, "Intel 28F160B3 1Mx16 BotB" }, -+ { 0x0089, 0x8896, 0x0400000, 2, BSC, 0x10000, 64, 0, 62, 8, blk8x8k, "Intel 28F320B3 2Mx16 TopB" }, -+ { 0x0089, 0x8897, 0x0400000, 2, BSC, 0x10000, 64, 1, 63, 8, blk8x8k, "Intel 28F320B3 2Mx16 BotB" }, -+ { 0x0089, 0x8898, 0x0800000, 2, BSC, 0x10000, 128, 0, 126, 8, blk8x8k, "Intel 28F640B3 4Mx16 TopB" }, -+ { 0x0089, 0x8899, 0x0800000, 2, BSC, 0x10000, 128, 1, 127, 8, blk8x8k, "Intel 28F640B3 4Mx16 BotB" }, -+ { 0x0089, 0x88C2, 0x0200000, 2, BSC, 0x10000, 32, 0, 30, 8, blk8x8k, "Intel 28F160C3 1Mx16 TopB" }, -+ { 0x0089, 0x88C3, 0x0200000, 2, BSC, 0x10000, 32, 1, 31, 8, blk8x8k, "Intel 28F160C3 1Mx16 BotB" }, -+ { 0x0089, 0x88C4, 0x0400000, 2, BSC, 0x10000, 64, 0, 62, 8, blk8x8k, "Intel 28F320C3 2Mx16 TopB" }, -+ { 0x0089, 0x88C5, 0x0400000, 2, BSC, 0x10000, 64, 1, 63, 8, blk8x8k, "Intel 28F320C3 2Mx16 BotB" }, -+ { 0x0089, 0x88CC, 0x0800000, 2, BSC, 0x10000, 128, 0, 126, 8, blk8x8k, "Intel 28F640C3 4Mx16 TopB" }, -+ { 0x0089, 0x88CD, 0x0800000, 2, BSC, 0x10000, 128, 1, 127, 8, blk8x8k, "Intel 28F640C3 4Mx16 BotB" }, -+ { 0x0089, 0x0014, 0x0400000, 2, SCS, 0x20000, 32, 0, 31, 0, NULL, "Intel 28F320J5 2Mx16" }, -+ { 0x0089, 0x0015, 0x0800000, 2, SCS, 0x20000, 64, 0, 63, 0, NULL, "Intel 28F640J5 4Mx16" }, -+ { 0x0089, 0x0016, 0x0400000, 2, SCS, 0x20000, 32, 0, 31, 0, NULL, "Intel 28F320J3 2Mx16" }, -+ { 0x0089, 0x0017, 0x0800000, 2, SCS, 0x20000, 64, 0, 63, 0, NULL, "Intel 28F640J3 4Mx16" }, -+ { 0x0089, 0x0018, 0x1000000, 2, SCS, 0x20000, 128, 0, 127, 0, NULL, "Intel 28F128J3 8Mx16" }, -+ { 0x00b0, 0x00e3, 0x0400000, 2, BSC, 0x10000, 64, 1, 63, 8, blk8x8k, "Sharp 28F320BJE 2Mx16 BotB" }, -+ { 0x0001, 0x224a, 0x0100000, 2, AMD, 0x10000, 16, 0, 13, 8, amd800, "AMD 29DL800BT 512Kx16 TopB" }, -+ { 0x0001, 0x22cb, 0x0100000, 2, AMD, 0x10000, 16, 2, 15, 8, amd800, "AMD 29DL800BB 512Kx16 BotB" }, -+ { 0x0001, 0x22c4, 0x0200000, 2, AMD, 0x10000, 32, 0, 30, 4, amd2114, "AMD 29lv160DT 1Mx16 TopB" }, -+ { 0x0001, 0x2249, 0x0200000, 2, AMD, 0x10000, 32, 1, 31, 4, amd4112, "AMD 29lv160DB 1Mx16 BotB" }, -+ { 0x0001, 0x22f6, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 8, blk8x8k, "AMD 29lv320DT 2Mx16 TopB" }, -+ { 0x0001, 0x22f9, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 8, blk8x8k, "AMD 29lv320DB 2Mx16 BotB" }, -+ { 0x0001, 0x227e, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 8, blk8x8k, "AMD 29lv320MT 2Mx16 TopB" }, -+ { 0x0001, 0x2200, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 8, blk8x8k, "AMD 29lv320MB 2Mx16 BotB" }, -+ { 0x0020, 0x22CA, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "ST 29w320DT 2Mx16 TopB" }, -+ { 0x0020, 0x22CB, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "ST 29w320DB 2Mx16 BotB" }, -+ { 0x00C2, 0x00A7, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "MX29LV320T 2Mx16 TopB" }, -+ { 0x00C2, 0x00A8, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "MX29LV320B 2Mx16 BotB" }, -+ { 0x0004, 0x22F6, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "MBM29LV320TE 2Mx16 TopB" }, -+ { 0x0004, 0x22F9, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "MBM29LV320BE 2Mx16 BotB" }, -+ { 0x0098, 0x009A, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "TC58FVT321 2Mx16 TopB" }, -+ { 0x0098, 0x009C, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "TC58FVB321 2Mx16 BotB" }, -+ { 0x00C2, 0x22A7, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "MX29LV320T 2Mx16 TopB" }, -+ { 0x00C2, 0x22A8, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "MX29LV320B 2Mx16 BotB" }, -+ { 0x00BF, 0x2783, 0x0400000, 2, SST, 0x10000, 64, 0, 63, 0, NULL, "SST39VF320 2Mx16" }, -+ { 0, 0, 0, 0, OLD, 0, 0, 0, 0, 0, NULL, NULL }, -+}; ++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,41)) ++#include ++#else ++#include ++#ifndef work_struct ++#define work_struct tq_struct ++#endif ++#ifndef INIT_WORK ++#define INIT_WORK(_work, _func, _data) INIT_TQUEUE((_work), (_func), (_data)) ++#endif ++#ifndef schedule_work ++#define schedule_work(_work) schedule_task((_work)) ++#endif ++#ifndef flush_scheduled_work ++#define flush_scheduled_work() flush_scheduled_tasks() ++#endif ++#endif + ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)) ++/* Some distributions have their own 2.6.x compatibility layers */ ++#ifndef IRQ_NONE ++typedef void irqreturn_t; ++#define IRQ_NONE ++#define IRQ_HANDLED ++#define IRQ_RETVAL(x) ++#endif +#else ++typedef irqreturn_t (*FN_ISR) (int irq, void *dev_id, struct pt_regs *ptregs); ++#endif + -+extern flash_cmds_t flash_cmds[]; -+extern unlock_cmd_t unlock_cmd; -+extern flash_desc_t flashes[]; ++#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE) + -+#endif -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/flashutl.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/flashutl.h ---- linux-2.4.32/arch/mips/bcm947xx/include/flashutl.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/flashutl.h 2005-12-16 23:39:10.708822000 +0100 -@@ -0,0 +1,27 @@ -+/* -+ * BCM47XX FLASH driver interface -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id$ -+ */ ++#include ++#include ++#include ++#include ++#include ++#include + -+#ifndef _flashutl_h_ -+#define _flashutl_h_ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,69)) ++/* In 2.5 (as of 2.5.69 at least) there is a cs_error exported which ++ * does this, but it's not in 2.4 so we do our own for now. */ ++static inline void ++cs_error(client_handle_t handle, int func, int ret) ++{ ++ error_info_t err = { func, ret }; ++ CardServices(ReportError, handle, &err); ++} ++#endif + ++#endif /* CONFIG_PCMCIA */ + -+#ifndef _LANGUAGE_ASSEMBLY ++#ifndef __exit ++#define __exit ++#endif ++#ifndef __devexit ++#define __devexit ++#endif ++#ifndef __devinit ++#define __devinit __init ++#endif ++#ifndef __devinitdata ++#define __devinitdata ++#endif ++#ifndef __devexit_p ++#define __devexit_p(x) x ++#endif + -+int sysFlashInit(char *flash_str); -+int sysFlashRead(uint off, uchar *dst, uint bytes); -+int sysFlashWrite(uint off, uchar *src, uint bytes); -+void nvWrite(unsigned short *data, unsigned int len); ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0)) + -+#endif /* _LANGUAGE_ASSEMBLY */ ++#define pci_get_drvdata(dev) (dev)->sysdata ++#define pci_set_drvdata(dev, value) (dev)->sysdata=(value) + -+#endif /* _flashutl_h_ */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/hnddma.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/hnddma.h ---- linux-2.4.32/arch/mips/bcm947xx/include/hnddma.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/hnddma.h 2005-12-16 23:39:10.708822000 +0100 -@@ -0,0 +1,71 @@ +/* -+ * Generic Broadcom Home Networking Division (HND) DMA engine SW interface -+ * This supports the following chips: BCM42xx, 44xx, 47xx . -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id$ ++ * New-style (2.4.x) PCI/hot-pluggable PCI/CardBus registration + */ + -+#ifndef _hnddma_h_ -+#define _hnddma_h_ -+ -+/* export structure */ -+typedef volatile struct { -+ /* rx error counters */ -+ uint rxgiants; /* rx giant frames */ -+ uint rxnobuf; /* rx out of dma descriptors */ -+ /* tx error counters */ -+ uint txnobuf; /* tx out of dma descriptors */ -+} hnddma_t; ++struct pci_device_id { ++ unsigned int vendor, device; /* Vendor and device ID or PCI_ANY_ID */ ++ unsigned int subvendor, subdevice; /* Subsystem ID's or PCI_ANY_ID */ ++ unsigned int class, class_mask; /* (class,subclass,prog-if) triplet */ ++ unsigned long driver_data; /* Data private to the driver */ ++}; + -+#ifndef di_t -+#define di_t void ++struct pci_driver { ++ struct list_head node; ++ char *name; ++ const struct pci_device_id *id_table; /* NULL if wants all devices */ ++ int (*probe)(struct pci_dev *dev, const struct pci_device_id *id); /* New device inserted */ ++ void (*remove)(struct pci_dev *dev); /* Device removed (NULL if not a hot-plug capable driver) */ ++ void (*suspend)(struct pci_dev *dev); /* Device suspended */ ++ void (*resume)(struct pci_dev *dev); /* Device woken up */ ++}; ++ ++#define MODULE_DEVICE_TABLE(type, name) ++#define PCI_ANY_ID (~0) ++ ++/* compatpci.c */ ++#define pci_module_init pci_register_driver ++extern int pci_register_driver(struct pci_driver *drv); ++extern void pci_unregister_driver(struct pci_driver *drv); ++ ++#endif /* PCI registration */ ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,2,18)) ++#ifdef MODULE ++#define module_init(x) int init_module(void) { return x(); } ++#define module_exit(x) void cleanup_module(void) { x(); } ++#else ++#define module_init(x) __initcall(x); ++#define module_exit(x) __exitcall(x); ++#endif +#endif + -+#ifndef osl_t -+#define osl_t void ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,48)) ++#define list_for_each(pos, head) \ ++ for (pos = (head)->next; pos != (head); pos = pos->next) +#endif + -+/* externs */ -+extern void * dma_attach(osl_t *osh, char *name, sb_t *sbh, void *dmaregstx, void *dmaregsrx, -+ uint ntxd, uint nrxd, uint rxbufsize, uint nrxpost, uint rxoffset, uint *msg_level); -+extern void dma_detach(di_t *di); -+extern void dma_txreset(di_t *di); -+extern void dma_rxreset(di_t *di); -+extern void dma_txinit(di_t *di); -+extern bool dma_txenabled(di_t *di); -+extern void dma_rxinit(di_t *di); -+extern void dma_rxenable(di_t *di); -+extern bool dma_rxenabled(di_t *di); -+extern void dma_txsuspend(di_t *di); -+extern void dma_txresume(di_t *di); -+extern bool dma_txsuspended(di_t *di); -+extern bool dma_txsuspendedidle(di_t *di); -+extern bool dma_txstopped(di_t *di); -+extern bool dma_rxstopped(di_t *di); -+extern int dma_txfast(di_t *di, void *p, uint32 coreflags); -+extern void dma_fifoloopbackenable(di_t *di); -+extern void *dma_rx(di_t *di); -+extern void dma_rxfill(di_t *di); -+extern void dma_txreclaim(di_t *di, bool forceall); -+extern void dma_rxreclaim(di_t *di); -+extern uintptr dma_getvar(di_t *di, char *name); -+extern void *dma_getnexttxp(di_t *di, bool forceall); -+extern void *dma_peeknexttxp(di_t *di); -+extern void *dma_getnextrxp(di_t *di, bool forceall); -+extern void dma_txblock(di_t *di); -+extern void dma_txunblock(di_t *di); -+extern uint dma_txactive(di_t *di); -+extern void dma_txrotate(di_t *di); ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,13)) ++#define pci_resource_start(dev, bar) ((dev)->base_address[(bar)]) ++#elif (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,44)) ++#define pci_resource_start(dev, bar) ((dev)->resource[(bar)].start) ++#endif + -+extern void dma_rxpiomode(dma32regs_t *); -+extern void dma_txpioloopback(dma32regs_t *); ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,23)) ++#define pci_enable_device(dev) do { } while (0) ++#endif + ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,14)) ++#define net_device device ++#endif + -+#endif /* _hnddma_h_ */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/hndmips.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/hndmips.h ---- linux-2.4.32/arch/mips/bcm947xx/include/hndmips.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/hndmips.h 2005-12-16 23:39:10.708822000 +0100 -@@ -0,0 +1,16 @@ -+/* -+ * Alternate include file for HND sbmips.h since CFE also ships with -+ * a sbmips.h. -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ -+ */ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,42)) + -+#include "sbmips.h" -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/linux_osl.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/linux_osl.h ---- linux-2.4.32/arch/mips/bcm947xx/include/linux_osl.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/linux_osl.h 2005-12-16 23:39:10.708822000 +0100 -@@ -0,0 +1,371 @@ +/* -+ * Linux OS Independent Layer -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * DMA mapping + * -+ * $Id$ ++ * See linux/Documentation/DMA-mapping.txt + */ + -+#ifndef _linux_osl_h_ -+#define _linux_osl_h_ ++#ifndef PCI_DMA_TODEVICE ++#define PCI_DMA_TODEVICE 1 ++#define PCI_DMA_FROMDEVICE 2 ++#endif + -+#include ++typedef u32 dma_addr_t; + -+/* use current 2.4.x calling conventions */ -+#include ++/* Pure 2^n version of get_order */ ++static inline int get_order(unsigned long size) ++{ ++ int order; + -+/* assert and panic */ -+#ifdef __GNUC__ -+#define GCC_VERSION (__GNUC__ * 10000 + __GNUC_MINOR__ * 100 + __GNUC_PATCHLEVEL__) -+#if GCC_VERSION > 30100 -+#define ASSERT(exp) do {} while (0) -+#else -+/* ASSERT could causes segmentation fault on GCC3.1, use empty instead*/ -+#define ASSERT(exp) -+#endif -+#endif ++ size = (size-1) >> (PAGE_SHIFT-1); ++ order = -1; ++ do { ++ size >>= 1; ++ order++; ++ } while (size); ++ return order; ++} + -+/* microsecond delay */ -+#define OSL_DELAY(usec) osl_delay(usec) -+extern void osl_delay(uint usec); ++static inline void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, ++ dma_addr_t *dma_handle) ++{ ++ void *ret; ++ int gfp = GFP_ATOMIC | GFP_DMA; + -+/* PCMCIA attribute space access macros */ -+#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE) -+struct pcmcia_dev { -+ dev_link_t link; /* PCMCIA device pointer */ -+ dev_node_t node; /* PCMCIA node structure */ -+ void *base; /* Mapped attribute memory window */ -+ size_t size; /* Size of window */ -+ void *drv; /* Driver data */ -+}; -+#endif -+#define OSL_PCMCIA_READ_ATTR(osh, offset, buf, size) \ -+ osl_pcmcia_read_attr((osh), (offset), (buf), (size)) -+#define OSL_PCMCIA_WRITE_ATTR(osh, offset, buf, size) \ -+ osl_pcmcia_write_attr((osh), (offset), (buf), (size)) -+extern void osl_pcmcia_read_attr(osl_t *osh, uint offset, void *buf, int size); -+extern void osl_pcmcia_write_attr(osl_t *osh, uint offset, void *buf, int size); ++ ret = (void *)__get_free_pages(gfp, get_order(size)); + -+/* PCI configuration space access macros */ -+#define OSL_PCI_READ_CONFIG(osh, offset, size) \ -+ osl_pci_read_config((osh), (offset), (size)) -+#define OSL_PCI_WRITE_CONFIG(osh, offset, size, val) \ -+ osl_pci_write_config((osh), (offset), (size), (val)) -+extern uint32 osl_pci_read_config(osl_t *osh, uint size, uint offset); -+extern void osl_pci_write_config(osl_t *osh, uint offset, uint size, uint val); ++ if (ret != NULL) { ++ memset(ret, 0, size); ++ *dma_handle = virt_to_bus(ret); ++ } ++ return ret; ++} ++static inline void pci_free_consistent(struct pci_dev *hwdev, size_t size, ++ void *vaddr, dma_addr_t dma_handle) ++{ ++ free_pages((unsigned long)vaddr, get_order(size)); ++} ++#ifdef ILSIM ++extern uint pci_map_single(void *dev, void *va, uint size, int direction); ++extern void pci_unmap_single(void *dev, uint pa, uint size, int direction); ++#else ++#define pci_map_single(cookie, address, size, dir) virt_to_bus(address) ++#define pci_unmap_single(cookie, address, size, dir) ++#endif + -+/* PCI device bus # and slot # */ -+#define OSL_PCI_BUS(osh) osl_pci_bus(osh) -+#define OSL_PCI_SLOT(osh) osl_pci_slot(osh) -+extern uint osl_pci_bus(osl_t *osh); -+extern uint osl_pci_slot(osl_t *osh); ++#endif /* DMA mapping */ + -+/* OSL initialization */ -+extern osl_t *osl_attach(void *pdev); -+extern void osl_detach(osl_t *osh); ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,43)) + -+/* host/bus architecture-specific byte swap */ -+#define BUS_SWAP32(v) (v) ++#define dev_kfree_skb_any(a) dev_kfree_skb(a) ++#define netif_down(dev) do { (dev)->start = 0; } while(0) + -+/* general purpose memory allocation */ ++/* pcmcia-cs provides its own netdevice compatibility layer */ ++#ifndef _COMPAT_NETDEVICE_H + -+#if defined(BCMDBG_MEM) ++/* ++ * SoftNet ++ * ++ * For pre-softnet kernels we need to tell the upper layer not to ++ * re-enter start_xmit() while we are in there. However softnet ++ * guarantees not to enter while we are in there so there is no need ++ * to do the netif_stop_queue() dance unless the transmit queue really ++ * gets stuck. This should also improve performance according to tests ++ * done by Aman Singla. ++ */ + -+#define MALLOC(osh, size) osl_debug_malloc((osh), (size), __LINE__, __FILE__) -+#define MFREE(osh, addr, size) osl_debug_mfree((osh), (addr), (size), __LINE__, __FILE__) -+#define MALLOCED(osh) osl_malloced((osh)) -+#define MALLOC_DUMP(osh, buf, sz) osl_debug_memdump((osh), (buf), (sz)) -+extern void *osl_debug_malloc(osl_t *osh, uint size, int line, char* file); -+extern void osl_debug_mfree(osl_t *osh, void *addr, uint size, int line, char* file); -+extern char *osl_debug_memdump(osl_t *osh, char *buf, uint sz); ++#define dev_kfree_skb_irq(a) dev_kfree_skb(a) ++#define netif_wake_queue(dev) do { clear_bit(0, &(dev)->tbusy); mark_bh(NET_BH); } while(0) ++#define netif_stop_queue(dev) set_bit(0, &(dev)->tbusy) + -+#else ++static inline void netif_start_queue(struct net_device *dev) ++{ ++ dev->tbusy = 0; ++ dev->interrupt = 0; ++ dev->start = 1; ++} + -+#define MALLOC(osh, size) osl_malloc((osh), (size)) -+#define MFREE(osh, addr, size) osl_mfree((osh), (addr), (size)) -+#define MALLOCED(osh) osl_malloced((osh)) ++#define netif_queue_stopped(dev) (dev)->tbusy ++#define netif_running(dev) (dev)->start + -+#endif /* BCMDBG_MEM */ ++#endif /* _COMPAT_NETDEVICE_H */ + -+#define MALLOC_FAILED(osh) osl_malloc_failed((osh)) ++#define netif_device_attach(dev) netif_start_queue(dev) ++#define netif_device_detach(dev) netif_stop_queue(dev) + -+extern void *osl_malloc(osl_t *osh, uint size); -+extern void osl_mfree(osl_t *osh, void *addr, uint size); -+extern uint osl_malloced(osl_t *osh); -+extern uint osl_malloc_failed(osl_t *osh); ++/* 2.4.x renamed bottom halves to tasklets */ ++#define tasklet_struct tq_struct ++static inline void tasklet_schedule(struct tasklet_struct *tasklet) ++{ ++ queue_task(tasklet, &tq_immediate); ++ mark_bh(IMMEDIATE_BH); ++} + -+/* allocate/free shared (dma-able) consistent memory */ -+#define DMA_CONSISTENT_ALIGN PAGE_SIZE -+#define DMA_ALLOC_CONSISTENT(osh, size, pap) \ -+ osl_dma_alloc_consistent((osh), (size), (pap)) -+#define DMA_FREE_CONSISTENT(osh, va, size, pa) \ -+ osl_dma_free_consistent((osh), (void*)(va), (size), (pa)) -+extern void *osl_dma_alloc_consistent(osl_t *osh, uint size, ulong *pap); -+extern void osl_dma_free_consistent(osl_t *osh, void *va, uint size, ulong pa); ++static inline void tasklet_init(struct tasklet_struct *tasklet, ++ void (*func)(unsigned long), ++ unsigned long data) ++{ ++ tasklet->next = NULL; ++ tasklet->sync = 0; ++ tasklet->routine = (void (*)(void *))func; ++ tasklet->data = (void *)data; ++} ++#define tasklet_kill(tasklet) {do{} while(0);} + -+/* map/unmap direction */ -+#define DMA_TX 1 -+#define DMA_RX 2 ++/* 2.4.x introduced del_timer_sync() */ ++#define del_timer_sync(timer) del_timer(timer) + -+/* map/unmap shared (dma-able) memory */ -+#define DMA_MAP(osh, va, size, direction, p) \ -+ osl_dma_map((osh), (va), (size), (direction)) -+#define DMA_UNMAP(osh, pa, size, direction, p) \ -+ osl_dma_unmap((osh), (pa), (size), (direction)) -+extern uint osl_dma_map(osl_t *osh, void *va, uint size, int direction); -+extern void osl_dma_unmap(osl_t *osh, uint pa, uint size, int direction); ++#else + -+/* register access macros */ -+#if defined(BCMJTAG) -+#include -+#define R_REG(r) bcmjtag_read(NULL, (uint32)(r), sizeof (*(r))) -+#define W_REG(r, v) bcmjtag_write(NULL, (uint32)(r), (uint32)(v), sizeof (*(r))) -+#endif ++#define netif_down(dev) ++ ++#endif /* SoftNet */ ++ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,3)) + +/* -+ * BINOSL selects the slightly slower function-call-based binary compatible osl. -+ * Macros expand to calls to functions defined in linux_osl.c . ++ * Emit code to initialise a tq_struct's routine and data pointers + */ -+#ifndef BINOSL ++#define PREPARE_TQUEUE(_tq, _routine, _data) \ ++ do { \ ++ (_tq)->routine = _routine; \ ++ (_tq)->data = _data; \ ++ } while (0) + -+/* string library, kernel mode */ -+#define printf(fmt, args...) printk(fmt, ## args) -+#include -+#include ++/* ++ * Emit code to initialise all of a tq_struct ++ */ ++#define INIT_TQUEUE(_tq, _routine, _data) \ ++ do { \ ++ INIT_LIST_HEAD(&(_tq)->list); \ ++ (_tq)->sync = 0; \ ++ PREPARE_TQUEUE((_tq), (_routine), (_data)); \ ++ } while (0) + -+/* register access macros */ -+#if !defined(BCMJTAG) -+#ifndef IL_BIGENDIAN -+#define R_REG(r) ( \ -+ sizeof(*(r)) == sizeof(uint8) ? readb((volatile uint8*)(r)) : \ -+ sizeof(*(r)) == sizeof(uint16) ? readw((volatile uint16*)(r)) : \ -+ readl((volatile uint32*)(r)) \ -+) -+#define W_REG(r, v) do { \ -+ switch (sizeof(*(r))) { \ -+ case sizeof(uint8): writeb((uint8)(v), (volatile uint8*)(r)); break; \ -+ case sizeof(uint16): writew((uint16)(v), (volatile uint16*)(r)); break; \ -+ case sizeof(uint32): writel((uint32)(v), (volatile uint32*)(r)); break; \ -+ } \ -+} while (0) -+#else /* IL_BIGENDIAN */ -+#define R_REG(r) ({ \ -+ __typeof(*(r)) __osl_v; \ -+ switch (sizeof(*(r))) { \ -+ case sizeof(uint8): __osl_v = readb((volatile uint8*)((uint32)r^3)); break; \ -+ case sizeof(uint16): __osl_v = readw((volatile uint16*)((uint32)r^2)); break; \ -+ case sizeof(uint32): __osl_v = readl((volatile uint32*)(r)); break; \ -+ } \ -+ __osl_v; \ -+}) -+#define W_REG(r, v) do { \ -+ switch (sizeof(*(r))) { \ -+ case sizeof(uint8): writeb((uint8)(v), (volatile uint8*)((uint32)r^3)); break; \ -+ case sizeof(uint16): writew((uint16)(v), (volatile uint16*)((uint32)r^2)); break; \ -+ case sizeof(uint32): writel((uint32)(v), (volatile uint32*)(r)); break; \ -+ } \ -+} while (0) -+#endif +#endif + -+#define AND_REG(r, v) W_REG((r), R_REG(r) & (v)) -+#define OR_REG(r, v) W_REG((r), R_REG(r) | (v)) ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,6)) + -+/* bcopy, bcmp, and bzero */ -+#define bcopy(src, dst, len) memcpy((dst), (src), (len)) -+#define bcmp(b1, b2, len) memcmp((b1), (b2), (len)) -+#define bzero(b, len) memset((b), '\0', (len)) ++/* Power management related routines */ + -+/* uncached virtual address */ -+#ifdef mips -+#define OSL_UNCACHED(va) KSEG1ADDR((va)) -+#include -+#else -+#define OSL_UNCACHED(va) (va) ++static inline int ++pci_save_state(struct pci_dev *dev, u32 *buffer) ++{ ++ int i; ++ if (buffer) { ++ for (i = 0; i < 16; i++) ++ pci_read_config_dword(dev, i * 4,&buffer[i]); ++ } ++ return 0; ++} ++ ++static inline int ++pci_restore_state(struct pci_dev *dev, u32 *buffer) ++{ ++ int i; ++ ++ if (buffer) { ++ for (i = 0; i < 16; i++) ++ pci_write_config_dword(dev,i * 4, buffer[i]); ++ } ++ /* ++ * otherwise, write the context information we know from bootup. ++ * This works around a problem where warm-booting from Windows ++ * combined with a D3(hot)->D0 transition causes PCI config ++ * header data to be forgotten. ++ */ ++ else { ++ for (i = 0; i < 6; i ++) ++ pci_write_config_dword(dev, ++ PCI_BASE_ADDRESS_0 + (i * 4), ++ pci_resource_start(dev, i)); ++ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); ++ } ++ return 0; ++} ++ ++#endif /* PCI power management */ ++ ++/* Old cp0 access macros deprecated in 2.4.19 */ ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,19)) ++#define read_c0_count() read_32bit_cp0_register(CP0_COUNT) +#endif + -+/* get processor cycle count */ -+#if defined(mips) -+#define OSL_GETCYCLES(x) ((x) = read_c0_count() * 2) -+#elif defined(__i386__) -+#define OSL_GETCYCLES(x) rdtscl((x)) ++/* Module refcount handled internally in 2.6.x */ ++#ifndef SET_MODULE_OWNER ++#define SET_MODULE_OWNER(dev) do {} while (0) ++#define OLD_MOD_INC_USE_COUNT MOD_INC_USE_COUNT ++#define OLD_MOD_DEC_USE_COUNT MOD_DEC_USE_COUNT +#else -+#define OSL_GETCYCLES(x) ((x) = 0) ++#define OLD_MOD_INC_USE_COUNT do {} while (0) ++#define OLD_MOD_DEC_USE_COUNT do {} while (0) +#endif + -+/* dereference an address that may cause a bus exception */ -+#ifdef mips -+#if defined(MODULE) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,17)) -+#define BUSPROBE(val, addr) panic("get_dbe() will not fixup a bus exception when compiled into a module") -+#else -+#define BUSPROBE(val, addr) get_dbe((val), (addr)) -+#include ++#ifndef SET_NETDEV_DEV ++#define SET_NETDEV_DEV(net, pdev) do {} while (0) +#endif -+#else -+#define BUSPROBE(val, addr) ({ (val) = R_REG((addr)); 0; }) ++ ++#ifndef HAVE_FREE_NETDEV ++#define free_netdev(dev) kfree(dev) +#endif + -+/* map/unmap physical to virtual I/O */ -+#define REG_MAP(pa, size) ioremap_nocache((unsigned long)(pa), (unsigned long)(size)) -+#define REG_UNMAP(va) iounmap((void *)(va)) ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)) ++/* struct packet_type redefined in 2.6.x */ ++#define af_packet_priv data ++#endif + -+/* shared (dma-able) memory access macros */ -+#define R_SM(r) *(r) -+#define W_SM(r, v) (*(r) = (v)) -+#define BZERO_SM(r, len) memset((r), '\0', (len)) ++#endif /* _linuxver_h_ */ +diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/mipsinc.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/mipsinc.h +--- linux-2.4.32/arch/mips/bcm947xx/include/mipsinc.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/mipsinc.h 2005-12-16 23:39:10.748824500 +0100 +@@ -0,0 +1,552 @@ ++/* ++ * HND Run Time Environment for standalone MIPS programs. ++ * ++ * Copyright 2005, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY ++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM ++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS ++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. ++ * ++ * $Id$ ++ */ + -+/* packet primitives */ -+#define PKTGET(osh, len, send) osl_pktget((osh), (len), (send)) -+#define PKTFREE(osh, skb, send) osl_pktfree((skb)) -+#define PKTDATA(osh, skb) (((struct sk_buff*)(skb))->data) -+#define PKTLEN(osh, skb) (((struct sk_buff*)(skb))->len) -+#define PKTHEADROOM(osh, skb) (PKTDATA(osh,skb)-(((struct sk_buff*)(skb))->head)) -+#define PKTTAILROOM(osh, skb) ((((struct sk_buff*)(skb))->end)-(((struct sk_buff*)(skb))->tail)) -+#define PKTNEXT(osh, skb) (((struct sk_buff*)(skb))->next) -+#define PKTSETNEXT(skb, x) (((struct sk_buff*)(skb))->next = (struct sk_buff*)(x)) -+#define PKTSETLEN(osh, skb, len) __skb_trim((struct sk_buff*)(skb), (len)) -+#define PKTPUSH(osh, skb, bytes) skb_push((struct sk_buff*)(skb), (bytes)) -+#define PKTPULL(osh, skb, bytes) skb_pull((struct sk_buff*)(skb), (bytes)) -+#define PKTDUP(osh, skb) skb_clone((struct sk_buff*)(skb), GFP_ATOMIC) -+#define PKTCOOKIE(skb) ((void*)((struct sk_buff*)(skb))->csum) -+#define PKTSETCOOKIE(skb, x) (((struct sk_buff*)(skb))->csum = (uint)(x)) -+#define PKTLINK(skb) (((struct sk_buff*)(skb))->prev) -+#define PKTSETLINK(skb, x) (((struct sk_buff*)(skb))->prev = (struct sk_buff*)(x)) -+#define PKTPRIO(skb) (((struct sk_buff*)(skb))->priority) -+#define PKTSETPRIO(skb, x) (((struct sk_buff*)(skb))->priority = (x)) -+extern void *osl_pktget(osl_t *osh, uint len, bool send); -+extern void osl_pktfree(void *skb); ++#ifndef _MISPINC_H ++#define _MISPINC_H + -+#else /* BINOSL */ + -+/* string library */ -+#ifndef LINUX_OSL -+#undef printf -+#define printf(fmt, args...) osl_printf((fmt), ## args) -+#undef sprintf -+#define sprintf(buf, fmt, args...) osl_sprintf((buf), (fmt), ## args) -+#undef strcmp -+#define strcmp(s1, s2) osl_strcmp((s1), (s2)) -+#undef strncmp -+#define strncmp(s1, s2, n) osl_strncmp((s1), (s2), (n)) -+#undef strlen -+#define strlen(s) osl_strlen((s)) -+#undef strcpy -+#define strcpy(d, s) osl_strcpy((d), (s)) -+#undef strncpy -+#define strncpy(d, s, n) osl_strncpy((d), (s), (n)) -+#endif -+extern int osl_printf(const char *format, ...); -+extern int osl_sprintf(char *buf, const char *format, ...); -+extern int osl_strcmp(const char *s1, const char *s2); -+extern int osl_strncmp(const char *s1, const char *s2, uint n); -+extern int osl_strlen(const char *s); -+extern char* osl_strcpy(char *d, const char *s); -+extern char* osl_strncpy(char *d, const char *s, uint n); -+ -+/* register access macros */ -+#if !defined(BCMJTAG) -+#define R_REG(r) ( \ -+ sizeof(*(r)) == sizeof(uint8) ? osl_readb((volatile uint8*)(r)) : \ -+ sizeof(*(r)) == sizeof(uint16) ? osl_readw((volatile uint16*)(r)) : \ -+ osl_readl((volatile uint32*)(r)) \ -+) -+#define W_REG(r, v) do { \ -+ switch (sizeof(*(r))) { \ -+ case sizeof(uint8): osl_writeb((uint8)(v), (volatile uint8*)(r)); break; \ -+ case sizeof(uint16): osl_writew((uint16)(v), (volatile uint16*)(r)); break; \ -+ case sizeof(uint32): osl_writel((uint32)(v), (volatile uint32*)(r)); break; \ -+ } \ -+} while (0) -+#endif -+ -+#define AND_REG(r, v) W_REG((r), R_REG(r) & (v)) -+#define OR_REG(r, v) W_REG((r), R_REG(r) | (v)) -+extern uint8 osl_readb(volatile uint8 *r); -+extern uint16 osl_readw(volatile uint16 *r); -+extern uint32 osl_readl(volatile uint32 *r); -+extern void osl_writeb(uint8 v, volatile uint8 *r); -+extern void osl_writew(uint16 v, volatile uint16 *r); -+extern void osl_writel(uint32 v, volatile uint32 *r); -+ -+/* bcopy, bcmp, and bzero */ -+extern void bcopy(const void *src, void *dst, int len); -+extern int bcmp(const void *b1, const void *b2, int len); -+extern void bzero(void *b, int len); -+ -+/* uncached virtual address */ -+#define OSL_UNCACHED(va) osl_uncached((va)) -+extern void *osl_uncached(void *va); -+ -+/* get processor cycle count */ -+#define OSL_GETCYCLES(x) ((x) = osl_getcycles()) -+extern uint osl_getcycles(void); -+ -+/* dereference an address that may target abort */ -+#define BUSPROBE(val, addr) osl_busprobe(&(val), (addr)) -+extern int osl_busprobe(uint32 *val, uint32 addr); -+ -+/* map/unmap physical to virtual */ -+#define REG_MAP(pa, size) osl_reg_map((pa), (size)) -+#define REG_UNMAP(va) osl_reg_unmap((va)) -+extern void *osl_reg_map(uint32 pa, uint size); -+extern void osl_reg_unmap(void *va); ++/* MIPS defines */ + -+/* shared (dma-able) memory access macros */ -+#define R_SM(r) *(r) -+#define W_SM(r, v) (*(r) = (v)) -+#define BZERO_SM(r, len) bzero((r), (len)) ++#ifdef _LANGUAGE_ASSEMBLY + -+/* packet primitives */ -+#define PKTGET(osh, len, send) osl_pktget((osh), (len), (send)) -+#define PKTFREE(osh, skb, send) osl_pktfree((skb)) -+#define PKTDATA(osh, skb) osl_pktdata((osh), (skb)) -+#define PKTLEN(osh, skb) osl_pktlen((osh), (skb)) -+#define PKTHEADROOM(osh, skb) osl_pktheadroom((osh), (skb)) -+#define PKTTAILROOM(osh, skb) osl_pkttailroom((osh), (skb)) -+#define PKTNEXT(osh, skb) osl_pktnext((osh), (skb)) -+#define PKTSETNEXT(skb, x) osl_pktsetnext((skb), (x)) -+#define PKTSETLEN(osh, skb, len) osl_pktsetlen((osh), (skb), (len)) -+#define PKTPUSH(osh, skb, bytes) osl_pktpush((osh), (skb), (bytes)) -+#define PKTPULL(osh, skb, bytes) osl_pktpull((osh), (skb), (bytes)) -+#define PKTDUP(osh, skb) osl_pktdup((osh), (skb)) -+#define PKTCOOKIE(skb) osl_pktcookie((skb)) -+#define PKTSETCOOKIE(skb, x) osl_pktsetcookie((skb), (x)) -+#define PKTLINK(skb) osl_pktlink((skb)) -+#define PKTSETLINK(skb, x) osl_pktsetlink((skb), (x)) -+#define PKTPRIO(skb) osl_pktprio((skb)) -+#define PKTSETPRIO(skb, x) osl_pktsetprio((skb), (x)) -+extern void *osl_pktget(osl_t *osh, uint len, bool send); -+extern void osl_pktfree(void *skb); -+extern uchar *osl_pktdata(osl_t *osh, void *skb); -+extern uint osl_pktlen(osl_t *osh, void *skb); -+extern uint osl_pktheadroom(osl_t *osh, void *skb); -+extern uint osl_pkttailroom(osl_t *osh, void *skb); -+extern void *osl_pktnext(osl_t *osh, void *skb); -+extern void osl_pktsetnext(void *skb, void *x); -+extern void osl_pktsetlen(osl_t *osh, void *skb, uint len); -+extern uchar *osl_pktpush(osl_t *osh, void *skb, int bytes); -+extern uchar *osl_pktpull(osl_t *osh, void *skb, int bytes); -+extern void *osl_pktdup(osl_t *osh, void *skb); -+extern void *osl_pktcookie(void *skb); -+extern void osl_pktsetcookie(void *skb, void *x); -+extern void *osl_pktlink(void *skb); -+extern void osl_pktsetlink(void *skb, void *x); -+extern uint osl_pktprio(void *skb); -+extern void osl_pktsetprio(void *skb, uint x); ++/* ++ * Symbolic register names for 32 bit ABI ++ */ ++#define zero $0 /* wired zero */ ++#define AT $1 /* assembler temp - uppercase because of ".set at" */ ++#define v0 $2 /* return value */ ++#define v1 $3 ++#define a0 $4 /* argument registers */ ++#define a1 $5 ++#define a2 $6 ++#define a3 $7 ++#define t0 $8 /* caller saved */ ++#define t1 $9 ++#define t2 $10 ++#define t3 $11 ++#define t4 $12 ++#define t5 $13 ++#define t6 $14 ++#define t7 $15 ++#define s0 $16 /* callee saved */ ++#define s1 $17 ++#define s2 $18 ++#define s3 $19 ++#define s4 $20 ++#define s5 $21 ++#define s6 $22 ++#define s7 $23 ++#define t8 $24 /* caller saved */ ++#define t9 $25 ++#define jp $25 /* PIC jump register */ ++#define k0 $26 /* kernel scratch */ ++#define k1 $27 ++#define gp $28 /* global pointer */ ++#define sp $29 /* stack pointer */ ++#define fp $30 /* frame pointer */ ++#define s8 $30 /* same like fp! */ ++#define ra $31 /* return address */ + -+#endif /* BINOSL */ + -+#define OSL_ERROR(bcmerror) osl_error(bcmerror) -+extern int osl_error(int bcmerror); ++/* ++ * CP0 Registers ++ */ + -+/* the largest reasonable packet buffer driver uses for ethernet MTU in bytes */ -+#define PKTBUFSZ 2048 ++#define C0_INX $0 ++#define C0_RAND $1 ++#define C0_TLBLO0 $2 ++#define C0_TLBLO C0_TLBLO0 ++#define C0_TLBLO1 $3 ++#define C0_CTEXT $4 ++#define C0_PGMASK $5 ++#define C0_WIRED $6 ++#define C0_BADVADDR $8 ++#define C0_COUNT $9 ++#define C0_TLBHI $10 ++#define C0_COMPARE $11 ++#define C0_SR $12 ++#define C0_STATUS C0_SR ++#define C0_CAUSE $13 ++#define C0_EPC $14 ++#define C0_PRID $15 ++#define C0_CONFIG $16 ++#define C0_LLADDR $17 ++#define C0_WATCHLO $18 ++#define C0_WATCHHI $19 ++#define C0_XCTEXT $20 ++#define C0_DIAGNOSTIC $22 ++#define C0_BROADCOM C0_DIAGNOSTIC ++#define C0_PERFORMANCE $25 ++#define C0_ECC $26 ++#define C0_CACHEERR $27 ++#define C0_TAGLO $28 ++#define C0_TAGHI $29 ++#define C0_ERREPC $30 ++#define C0_DESAVE $31 + -+#endif /* _linux_osl_h_ */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/linuxver.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/linuxver.h ---- linux-2.4.32/arch/mips/bcm947xx/include/linuxver.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/linuxver.h 2005-12-16 23:39:10.748824500 +0100 -@@ -0,0 +1,411 @@ +/* -+ * Linux-specific abstractions to gain some independence from linux kernel versions. -+ * Pave over some 2.2 versus 2.4 versus 2.6 kernel differences. -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ ++ * LEAF - declare leaf routine + */ ++#define LEAF(symbol) \ ++ .globl symbol; \ ++ .align 2; \ ++ .type symbol,@function; \ ++ .ent symbol,0; \ ++symbol: .frame sp,0,ra + -+#ifndef _linuxver_h_ -+#define _linuxver_h_ ++/* ++ * END - mark end of function ++ */ ++#define END(function) \ ++ .end function; \ ++ .size function,.-function + -+#include -+#include ++#define _ULCAST_ + -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,0)) -+/* __NO_VERSION__ must be defined for all linkables except one in 2.2 */ -+#ifdef __UNDEF_NO_VERSION__ -+#undef __NO_VERSION__ +#else -+#define __NO_VERSION__ -+#endif -+#endif + -+#if defined(MODULE) && defined(MODVERSIONS) -+#include ++/* ++ * The following macros are especially useful for __asm__ ++ * inline assembler. ++ */ ++#ifndef __STR ++#define __STR(x) #x +#endif -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) -+#include ++#ifndef STR ++#define STR(x) __STR(x) +#endif + ++#define _ULCAST_ (unsigned long) + -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -+#define module_param(_name_, _type_, _perm_) MODULE_PARM(_name_, "i") -+#define module_param_string(_name_, _string_, _size_, _perm_) MODULE_PARM(_string_, "c" __MODULE_STRING(_size_)) -+#endif -+ -+/* linux/malloc.h is deprecated, use linux/slab.h instead. */ -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,9)) -+#include -+#else -+#include -+#endif + -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include ++/* ++ * CP0 Registers ++ */ + -+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,41)) -+#include -+#else -+#include -+#ifndef work_struct -+#define work_struct tq_struct -+#endif -+#ifndef INIT_WORK -+#define INIT_WORK(_work, _func, _data) INIT_TQUEUE((_work), (_func), (_data)) -+#endif -+#ifndef schedule_work -+#define schedule_work(_work) schedule_task((_work)) -+#endif -+#ifndef flush_scheduled_work -+#define flush_scheduled_work() flush_scheduled_tasks() -+#endif -+#endif -+ -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)) -+/* Some distributions have their own 2.6.x compatibility layers */ -+#ifndef IRQ_NONE -+typedef void irqreturn_t; -+#define IRQ_NONE -+#define IRQ_HANDLED -+#define IRQ_RETVAL(x) -+#endif -+#else -+typedef irqreturn_t (*FN_ISR) (int irq, void *dev_id, struct pt_regs *ptregs); -+#endif -+ -+#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE) -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,69)) -+/* In 2.5 (as of 2.5.69 at least) there is a cs_error exported which -+ * does this, but it's not in 2.4 so we do our own for now. */ -+static inline void -+cs_error(client_handle_t handle, int func, int ret) -+{ -+ error_info_t err = { func, ret }; -+ CardServices(ReportError, handle, &err); -+} -+#endif -+ -+#endif /* CONFIG_PCMCIA */ -+ -+#ifndef __exit -+#define __exit -+#endif -+#ifndef __devexit -+#define __devexit -+#endif -+#ifndef __devinit -+#define __devinit __init -+#endif -+#ifndef __devinitdata -+#define __devinitdata -+#endif -+#ifndef __devexit_p -+#define __devexit_p(x) x -+#endif -+ -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0)) ++#define C0_INX 0 /* CP0: TLB Index */ ++#define C0_RAND 1 /* CP0: TLB Random */ ++#define C0_TLBLO0 2 /* CP0: TLB EntryLo0 */ ++#define C0_TLBLO C0_TLBLO0 /* CP0: TLB EntryLo0 */ ++#define C0_TLBLO1 3 /* CP0: TLB EntryLo1 */ ++#define C0_CTEXT 4 /* CP0: Context */ ++#define C0_PGMASK 5 /* CP0: TLB PageMask */ ++#define C0_WIRED 6 /* CP0: TLB Wired */ ++#define C0_BADVADDR 8 /* CP0: Bad Virtual Address */ ++#define C0_COUNT 9 /* CP0: Count */ ++#define C0_TLBHI 10 /* CP0: TLB EntryHi */ ++#define C0_COMPARE 11 /* CP0: Compare */ ++#define C0_SR 12 /* CP0: Processor Status */ ++#define C0_STATUS C0_SR /* CP0: Processor Status */ ++#define C0_CAUSE 13 /* CP0: Exception Cause */ ++#define C0_EPC 14 /* CP0: Exception PC */ ++#define C0_PRID 15 /* CP0: Processor Revision Indentifier */ ++#define C0_CONFIG 16 /* CP0: Config */ ++#define C0_LLADDR 17 /* CP0: LLAddr */ ++#define C0_WATCHLO 18 /* CP0: WatchpointLo */ ++#define C0_WATCHHI 19 /* CP0: WatchpointHi */ ++#define C0_XCTEXT 20 /* CP0: XContext */ ++#define C0_DIAGNOSTIC 22 /* CP0: Diagnostic */ ++#define C0_BROADCOM C0_DIAGNOSTIC /* CP0: Broadcom Register */ ++#define C0_PERFORMANCE 25 /* CP0: Performance Counter/Control Registers */ ++#define C0_ECC 26 /* CP0: ECC */ ++#define C0_CACHEERR 27 /* CP0: CacheErr */ ++#define C0_TAGLO 28 /* CP0: TagLo */ ++#define C0_TAGHI 29 /* CP0: TagHi */ ++#define C0_ERREPC 30 /* CP0: ErrorEPC */ ++#define C0_DESAVE 31 /* CP0: DebugSave */ + -+#define pci_get_drvdata(dev) (dev)->sysdata -+#define pci_set_drvdata(dev, value) (dev)->sysdata=(value) ++#endif /* _LANGUAGE_ASSEMBLY */ + +/* -+ * New-style (2.4.x) PCI/hot-pluggable PCI/CardBus registration ++ * Memory segments (32bit kernel mode addresses) + */ ++#undef KUSEG ++#undef KSEG0 ++#undef KSEG1 ++#undef KSEG2 ++#undef KSEG3 ++#define KUSEG 0x00000000 ++#define KSEG0 0x80000000 ++#define KSEG1 0xa0000000 ++#define KSEG2 0xc0000000 ++#define KSEG3 0xe0000000 ++#define PHYSADDR_MASK 0x1fffffff + -+struct pci_device_id { -+ unsigned int vendor, device; /* Vendor and device ID or PCI_ANY_ID */ -+ unsigned int subvendor, subdevice; /* Subsystem ID's or PCI_ANY_ID */ -+ unsigned int class, class_mask; /* (class,subclass,prog-if) triplet */ -+ unsigned long driver_data; /* Data private to the driver */ -+}; -+ -+struct pci_driver { -+ struct list_head node; -+ char *name; -+ const struct pci_device_id *id_table; /* NULL if wants all devices */ -+ int (*probe)(struct pci_dev *dev, const struct pci_device_id *id); /* New device inserted */ -+ void (*remove)(struct pci_dev *dev); /* Device removed (NULL if not a hot-plug capable driver) */ -+ void (*suspend)(struct pci_dev *dev); /* Device suspended */ -+ void (*resume)(struct pci_dev *dev); /* Device woken up */ -+}; -+ -+#define MODULE_DEVICE_TABLE(type, name) -+#define PCI_ANY_ID (~0) -+ -+/* compatpci.c */ -+#define pci_module_init pci_register_driver -+extern int pci_register_driver(struct pci_driver *drv); -+extern void pci_unregister_driver(struct pci_driver *drv); ++/* ++ * Map an address to a certain kernel segment ++ */ ++#undef PHYSADDR ++#undef KSEG0ADDR ++#undef KSEG1ADDR ++#undef KSEG2ADDR ++#undef KSEG3ADDR + -+#endif /* PCI registration */ ++#define PHYSADDR(a) (_ULCAST_(a) & PHYSADDR_MASK) ++#define KSEG0ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG0) ++#define KSEG1ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG1) ++#define KSEG2ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG2) ++#define KSEG3ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG3) + -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,2,18)) -+#ifdef MODULE -+#define module_init(x) int init_module(void) { return x(); } -+#define module_exit(x) void cleanup_module(void) { x(); } -+#else -+#define module_init(x) __initcall(x); -+#define module_exit(x) __exitcall(x); -+#endif -+#endif + -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,48)) -+#define list_for_each(pos, head) \ -+ for (pos = (head)->next; pos != (head); pos = pos->next) ++#ifndef Index_Invalidate_I ++/* ++ * Cache Operations ++ */ ++#define Index_Invalidate_I 0x00 ++#define Index_Writeback_Inv_D 0x01 ++#define Index_Invalidate_SI 0x02 ++#define Index_Writeback_Inv_SD 0x03 ++#define Index_Load_Tag_I 0x04 ++#define Index_Load_Tag_D 0x05 ++#define Index_Load_Tag_SI 0x06 ++#define Index_Load_Tag_SD 0x07 ++#define Index_Store_Tag_I 0x08 ++#define Index_Store_Tag_D 0x09 ++#define Index_Store_Tag_SI 0x0A ++#define Index_Store_Tag_SD 0x0B ++#define Create_Dirty_Excl_D 0x0d ++#define Create_Dirty_Excl_SD 0x0f ++#define Hit_Invalidate_I 0x10 ++#define Hit_Invalidate_D 0x11 ++#define Hit_Invalidate_SI 0x12 ++#define Hit_Invalidate_SD 0x13 ++#define Fill_I 0x14 ++#define Hit_Writeback_Inv_D 0x15 ++ /* 0x16 is unused */ ++#define Hit_Writeback_Inv_SD 0x17 ++#define R5K_Page_Invalidate_S 0x17 ++#define Hit_Writeback_I 0x18 ++#define Hit_Writeback_D 0x19 ++ /* 0x1a is unused */ ++#define Hit_Writeback_SD 0x1b ++ /* 0x1c is unused */ ++ /* 0x1e is unused */ ++#define Hit_Set_Virtual_SI 0x1e ++#define Hit_Set_Virtual_SD 0x1f +#endif + -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,13)) -+#define pci_resource_start(dev, bar) ((dev)->base_address[(bar)]) -+#elif (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,44)) -+#define pci_resource_start(dev, bar) ((dev)->resource[(bar)].start) -+#endif + -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,23)) -+#define pci_enable_device(dev) do { } while (0) -+#endif ++/* ++ * R4x00 interrupt enable / cause bits ++ */ ++#define IE_SW0 (_ULCAST_(1) << 8) ++#define IE_SW1 (_ULCAST_(1) << 9) ++#define IE_IRQ0 (_ULCAST_(1) << 10) ++#define IE_IRQ1 (_ULCAST_(1) << 11) ++#define IE_IRQ2 (_ULCAST_(1) << 12) ++#define IE_IRQ3 (_ULCAST_(1) << 13) ++#define IE_IRQ4 (_ULCAST_(1) << 14) ++#define IE_IRQ5 (_ULCAST_(1) << 15) + -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,14)) -+#define net_device device ++#ifndef ST0_UM ++/* ++ * Bitfields in the mips32 cp0 status register ++ */ ++#define ST0_IE 0x00000001 ++#define ST0_EXL 0x00000002 ++#define ST0_ERL 0x00000004 ++#define ST0_UM 0x00000010 ++#define ST0_SWINT0 0x00000100 ++#define ST0_SWINT1 0x00000200 ++#define ST0_HWINT0 0x00000400 ++#define ST0_HWINT1 0x00000800 ++#define ST0_HWINT2 0x00001000 ++#define ST0_HWINT3 0x00002000 ++#define ST0_HWINT4 0x00004000 ++#define ST0_HWINT5 0x00008000 ++#define ST0_IM 0x0000ff00 ++#define ST0_NMI 0x00080000 ++#define ST0_SR 0x00100000 ++#define ST0_TS 0x00200000 ++#define ST0_BEV 0x00400000 ++#define ST0_RE 0x02000000 ++#define ST0_RP 0x08000000 ++#define ST0_CU 0xf0000000 ++#define ST0_CU0 0x10000000 ++#define ST0_CU1 0x20000000 ++#define ST0_CU2 0x40000000 ++#define ST0_CU3 0x80000000 +#endif + -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,42)) + +/* -+ * DMA mapping -+ * -+ * See linux/Documentation/DMA-mapping.txt ++ * Bitfields in the mips32 cp0 cause register + */ ++#define C_EXC 0x0000007c ++#define C_EXC_SHIFT 2 ++#define C_INT 0x0000ff00 ++#define C_INT_SHIFT 8 ++#define C_SW0 (_ULCAST_(1) << 8) ++#define C_SW1 (_ULCAST_(1) << 9) ++#define C_IRQ0 (_ULCAST_(1) << 10) ++#define C_IRQ1 (_ULCAST_(1) << 11) ++#define C_IRQ2 (_ULCAST_(1) << 12) ++#define C_IRQ3 (_ULCAST_(1) << 13) ++#define C_IRQ4 (_ULCAST_(1) << 14) ++#define C_IRQ5 (_ULCAST_(1) << 15) ++#define C_WP 0x00400000 ++#define C_IV 0x00800000 ++#define C_CE 0x30000000 ++#define C_CE_SHIFT 28 ++#define C_BD 0x80000000 + -+#ifndef PCI_DMA_TODEVICE -+#define PCI_DMA_TODEVICE 1 -+#define PCI_DMA_FROMDEVICE 2 -+#endif -+ -+typedef u32 dma_addr_t; -+ -+/* Pure 2^n version of get_order */ -+static inline int get_order(unsigned long size) -+{ -+ int order; -+ -+ size = (size-1) >> (PAGE_SHIFT-1); -+ order = -1; -+ do { -+ size >>= 1; -+ order++; -+ } while (size); -+ return order; -+} -+ -+static inline void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, -+ dma_addr_t *dma_handle) -+{ -+ void *ret; -+ int gfp = GFP_ATOMIC | GFP_DMA; -+ -+ ret = (void *)__get_free_pages(gfp, get_order(size)); -+ -+ if (ret != NULL) { -+ memset(ret, 0, size); -+ *dma_handle = virt_to_bus(ret); -+ } -+ return ret; -+} -+static inline void pci_free_consistent(struct pci_dev *hwdev, size_t size, -+ void *vaddr, dma_addr_t dma_handle) -+{ -+ free_pages((unsigned long)vaddr, get_order(size)); -+} -+#ifdef ILSIM -+extern uint pci_map_single(void *dev, void *va, uint size, int direction); -+extern void pci_unmap_single(void *dev, uint pa, uint size, int direction); -+#else -+#define pci_map_single(cookie, address, size, dir) virt_to_bus(address) -+#define pci_unmap_single(cookie, address, size, dir) -+#endif -+ -+#endif /* DMA mapping */ -+ -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,43)) -+ -+#define dev_kfree_skb_any(a) dev_kfree_skb(a) -+#define netif_down(dev) do { (dev)->start = 0; } while(0) -+ -+/* pcmcia-cs provides its own netdevice compatibility layer */ -+#ifndef _COMPAT_NETDEVICE_H -+ -+/* -+ * SoftNet -+ * -+ * For pre-softnet kernels we need to tell the upper layer not to -+ * re-enter start_xmit() while we are in there. However softnet -+ * guarantees not to enter while we are in there so there is no need -+ * to do the netif_stop_queue() dance unless the transmit queue really -+ * gets stuck. This should also improve performance according to tests -+ * done by Aman Singla. -+ */ -+ -+#define dev_kfree_skb_irq(a) dev_kfree_skb(a) -+#define netif_wake_queue(dev) do { clear_bit(0, &(dev)->tbusy); mark_bh(NET_BH); } while(0) -+#define netif_stop_queue(dev) set_bit(0, &(dev)->tbusy) -+ -+static inline void netif_start_queue(struct net_device *dev) -+{ -+ dev->tbusy = 0; -+ dev->interrupt = 0; -+ dev->start = 1; -+} -+ -+#define netif_queue_stopped(dev) (dev)->tbusy -+#define netif_running(dev) (dev)->start -+ -+#endif /* _COMPAT_NETDEVICE_H */ -+ -+#define netif_device_attach(dev) netif_start_queue(dev) -+#define netif_device_detach(dev) netif_stop_queue(dev) -+ -+/* 2.4.x renamed bottom halves to tasklets */ -+#define tasklet_struct tq_struct -+static inline void tasklet_schedule(struct tasklet_struct *tasklet) -+{ -+ queue_task(tasklet, &tq_immediate); -+ mark_bh(IMMEDIATE_BH); -+} -+ -+static inline void tasklet_init(struct tasklet_struct *tasklet, -+ void (*func)(unsigned long), -+ unsigned long data) -+{ -+ tasklet->next = NULL; -+ tasklet->sync = 0; -+ tasklet->routine = (void (*)(void *))func; -+ tasklet->data = (void *)data; -+} -+#define tasklet_kill(tasklet) {do{} while(0);} -+ -+/* 2.4.x introduced del_timer_sync() */ -+#define del_timer_sync(timer) del_timer(timer) -+ -+#else -+ -+#define netif_down(dev) -+ -+#endif /* SoftNet */ -+ -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,3)) -+ -+/* -+ * Emit code to initialise a tq_struct's routine and data pointers -+ */ -+#define PREPARE_TQUEUE(_tq, _routine, _data) \ -+ do { \ -+ (_tq)->routine = _routine; \ -+ (_tq)->data = _data; \ -+ } while (0) -+ -+/* -+ * Emit code to initialise all of a tq_struct -+ */ -+#define INIT_TQUEUE(_tq, _routine, _data) \ -+ do { \ -+ INIT_LIST_HEAD(&(_tq)->list); \ -+ (_tq)->sync = 0; \ -+ PREPARE_TQUEUE((_tq), (_routine), (_data)); \ -+ } while (0) -+ -+#endif -+ -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,6)) -+ -+/* Power management related routines */ -+ -+static inline int -+pci_save_state(struct pci_dev *dev, u32 *buffer) -+{ -+ int i; -+ if (buffer) { -+ for (i = 0; i < 16; i++) -+ pci_read_config_dword(dev, i * 4,&buffer[i]); -+ } -+ return 0; -+} -+ -+static inline int -+pci_restore_state(struct pci_dev *dev, u32 *buffer) -+{ -+ int i; -+ -+ if (buffer) { -+ for (i = 0; i < 16; i++) -+ pci_write_config_dword(dev,i * 4, buffer[i]); -+ } -+ /* -+ * otherwise, write the context information we know from bootup. -+ * This works around a problem where warm-booting from Windows -+ * combined with a D3(hot)->D0 transition causes PCI config -+ * header data to be forgotten. -+ */ -+ else { -+ for (i = 0; i < 6; i ++) -+ pci_write_config_dword(dev, -+ PCI_BASE_ADDRESS_0 + (i * 4), -+ pci_resource_start(dev, i)); -+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); -+ } -+ return 0; -+} -+ -+#endif /* PCI power management */ -+ -+/* Old cp0 access macros deprecated in 2.4.19 */ -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,19)) -+#define read_c0_count() read_32bit_cp0_register(CP0_COUNT) -+#endif -+ -+/* Module refcount handled internally in 2.6.x */ -+#ifndef SET_MODULE_OWNER -+#define SET_MODULE_OWNER(dev) do {} while (0) -+#define OLD_MOD_INC_USE_COUNT MOD_INC_USE_COUNT -+#define OLD_MOD_DEC_USE_COUNT MOD_DEC_USE_COUNT -+#else -+#define OLD_MOD_INC_USE_COUNT do {} while (0) -+#define OLD_MOD_DEC_USE_COUNT do {} while (0) -+#endif -+ -+#ifndef SET_NETDEV_DEV -+#define SET_NETDEV_DEV(net, pdev) do {} while (0) -+#endif -+ -+#ifndef HAVE_FREE_NETDEV -+#define free_netdev(dev) kfree(dev) -+#endif -+ -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)) -+/* struct packet_type redefined in 2.6.x */ -+#define af_packet_priv data -+#endif -+ -+#endif /* _linuxver_h_ */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/min_osl.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/min_osl.h ---- linux-2.4.32/arch/mips/bcm947xx/include/min_osl.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/min_osl.h 2005-12-16 23:39:10.748824500 +0100 -@@ -0,0 +1,126 @@ -+/* -+ * HND Minimal OS Abstraction Layer. -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ -+ */ -+ -+#ifndef _min_osl_h_ -+#define _min_osl_h_ -+ -+#include -+#include -+#include -+ -+/* Cache support */ -+extern void caches_on(void); -+extern void blast_dcache(void); -+extern void blast_icache(void); -+ -+/* uart output */ -+extern void putc(int c); -+ -+/* lib functions */ -+extern int printf(const char *fmt, ...); -+extern int sprintf(char *buf, const char *fmt, ...); -+extern int strcmp(const char *s1, const char *s2); -+extern int strncmp(const char *s1, const char *s2, uint n); -+extern char *strcpy(char *dest, const char *src); -+extern char *strncpy(char *dest, const char *src, uint n); -+extern uint strlen(const char *s); -+extern char *strchr(const char *str,int c); -+extern char *strrchr(const char *str, int c); -+extern char *strcat(char *d, const char *s); -+extern void *memset(void *dest, int c, uint n); -+extern void *memcpy(void *dest, const void *src, uint n); -+extern int memcmp(const void *s1, const void *s2, uint n); -+#define bcopy(src, dst, len) memcpy((dst), (src), (len)) -+#define bcmp(b1, b2, len) memcmp((b1), (b2), (len)) -+#define bzero(b, len) memset((b), '\0', (len)) -+ -+/* assert & debugging */ -+#define ASSERT(exp) do {} while (0) -+ -+/* PCMCIA attribute space access macros */ -+#define OSL_PCMCIA_READ_ATTR(osh, offset, buf, size) \ -+ ASSERT(0) -+#define OSL_PCMCIA_WRITE_ATTR(osh, offset, buf, size) \ -+ ASSERT(0) -+ -+/* PCI configuration space access macros */ -+#define OSL_PCI_READ_CONFIG(loc, offset, size) \ -+ (offset == 8 ? 0 : 0xffffffff) -+#define OSL_PCI_WRITE_CONFIG(loc, offset, size, val) \ -+ do {} while (0) -+ -+/* PCI device bus # and slot # */ -+#define OSL_PCI_BUS(osh) (0) -+#define OSL_PCI_SLOT(osh) (0) -+ -+/* register access macros */ -+#define wreg32(r, v) (*(volatile uint32*)(r) = (uint32)(v)) -+#define rreg32(r) (*(volatile uint32*)(r)) -+#define wreg16(r, v) (*(volatile uint16*)(r) = (uint16)(v)) -+#define rreg16(r) (*(volatile uint16*)(r)) -+#define wreg8(r, v) (*(volatile uint8*)(r) = (uint8)(v)) -+#define rreg8(r) (*(volatile uint8*)(r)) -+#define R_REG(r) ({ \ -+ __typeof(*(r)) __osl_v; \ -+ switch (sizeof(*(r))) { \ -+ case sizeof(uint8): __osl_v = rreg8((r)); break; \ -+ case sizeof(uint16): __osl_v = rreg16((r)); break; \ -+ case sizeof(uint32): __osl_v = rreg32((r)); break; \ -+ } \ -+ __osl_v; \ -+}) -+#define W_REG(r, v) do { \ -+ switch (sizeof(*(r))) { \ -+ case sizeof(uint8): wreg8((r), (v)); break; \ -+ case sizeof(uint16): wreg16((r), (v)); break; \ -+ case sizeof(uint32): wreg32((r), (v)); break; \ -+ } \ -+} while (0) -+#define AND_REG(r, v) W_REG((r), R_REG(r) & (v)) -+#define OR_REG(r, v) W_REG((r), R_REG(r) | (v)) -+ -+/* general purpose memory allocation */ -+#define MALLOC(osh, size) malloc(size) -+#define MFREE(osh, addr, size) free(addr) -+#define MALLOCED(osh) 0 -+#define MALLOC_FAILED(osh) 0 -+#define MALLOC_DUMP(osh, buf, sz) -+extern int free(void *ptr); -+extern void *malloc(uint size); -+ -+/* uncached virtual address */ -+#define OSL_UNCACHED(va) ((void*)KSEG1ADDR((ulong)(va))) -+ -+/* host/bus architecture-specific address byte swap */ -+#define BUS_SWAP32(v) (v) -+ -+/* microsecond delay */ -+#define OSL_DELAY(usec) udelay(usec) -+extern void udelay(uint32 usec); -+ -+/* map/unmap physical to virtual I/O */ -+#define REG_MAP(pa, size) ((void*)KSEG1ADDR((ulong)(pa))) -+#define REG_UNMAP(va) do {} while (0) -+ -+/* dereference an address that may cause a bus exception */ -+#define BUSPROBE(val, addr) (uint32 *)(addr) = (val) -+ -+/* Misc stubs */ -+#define osl_attach(pdev) ((osl_t*)pdev) -+#define osl_detach(osh) -+extern void *osl_init(void); -+#define OSL_ERROR(bcmerror) osl_error(bcmerror) -+extern int osl_error(int); -+ -+#endif /* _min_osl_h_ */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/mipsinc.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/mipsinc.h ---- linux-2.4.32/arch/mips/bcm947xx/include/mipsinc.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/mipsinc.h 2005-12-16 23:39:10.748824500 +0100 -@@ -0,0 +1,552 @@ -+/* -+ * HND Run Time Environment for standalone MIPS programs. -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ -+ */ -+ -+#ifndef _MISPINC_H -+#define _MISPINC_H -+ -+ -+/* MIPS defines */ -+ -+#ifdef _LANGUAGE_ASSEMBLY -+ -+/* -+ * Symbolic register names for 32 bit ABI -+ */ -+#define zero $0 /* wired zero */ -+#define AT $1 /* assembler temp - uppercase because of ".set at" */ -+#define v0 $2 /* return value */ -+#define v1 $3 -+#define a0 $4 /* argument registers */ -+#define a1 $5 -+#define a2 $6 -+#define a3 $7 -+#define t0 $8 /* caller saved */ -+#define t1 $9 -+#define t2 $10 -+#define t3 $11 -+#define t4 $12 -+#define t5 $13 -+#define t6 $14 -+#define t7 $15 -+#define s0 $16 /* callee saved */ -+#define s1 $17 -+#define s2 $18 -+#define s3 $19 -+#define s4 $20 -+#define s5 $21 -+#define s6 $22 -+#define s7 $23 -+#define t8 $24 /* caller saved */ -+#define t9 $25 -+#define jp $25 /* PIC jump register */ -+#define k0 $26 /* kernel scratch */ -+#define k1 $27 -+#define gp $28 /* global pointer */ -+#define sp $29 /* stack pointer */ -+#define fp $30 /* frame pointer */ -+#define s8 $30 /* same like fp! */ -+#define ra $31 /* return address */ -+ -+ -+/* -+ * CP0 Registers -+ */ -+ -+#define C0_INX $0 -+#define C0_RAND $1 -+#define C0_TLBLO0 $2 -+#define C0_TLBLO C0_TLBLO0 -+#define C0_TLBLO1 $3 -+#define C0_CTEXT $4 -+#define C0_PGMASK $5 -+#define C0_WIRED $6 -+#define C0_BADVADDR $8 -+#define C0_COUNT $9 -+#define C0_TLBHI $10 -+#define C0_COMPARE $11 -+#define C0_SR $12 -+#define C0_STATUS C0_SR -+#define C0_CAUSE $13 -+#define C0_EPC $14 -+#define C0_PRID $15 -+#define C0_CONFIG $16 -+#define C0_LLADDR $17 -+#define C0_WATCHLO $18 -+#define C0_WATCHHI $19 -+#define C0_XCTEXT $20 -+#define C0_DIAGNOSTIC $22 -+#define C0_BROADCOM C0_DIAGNOSTIC -+#define C0_PERFORMANCE $25 -+#define C0_ECC $26 -+#define C0_CACHEERR $27 -+#define C0_TAGLO $28 -+#define C0_TAGHI $29 -+#define C0_ERREPC $30 -+#define C0_DESAVE $31 -+ -+/* -+ * LEAF - declare leaf routine -+ */ -+#define LEAF(symbol) \ -+ .globl symbol; \ -+ .align 2; \ -+ .type symbol,@function; \ -+ .ent symbol,0; \ -+symbol: .frame sp,0,ra -+ -+/* -+ * END - mark end of function -+ */ -+#define END(function) \ -+ .end function; \ -+ .size function,.-function -+ -+#define _ULCAST_ -+ -+#else -+ -+/* -+ * The following macros are especially useful for __asm__ -+ * inline assembler. -+ */ -+#ifndef __STR -+#define __STR(x) #x -+#endif -+#ifndef STR -+#define STR(x) __STR(x) -+#endif -+ -+#define _ULCAST_ (unsigned long) -+ -+ -+/* -+ * CP0 Registers -+ */ -+ -+#define C0_INX 0 /* CP0: TLB Index */ -+#define C0_RAND 1 /* CP0: TLB Random */ -+#define C0_TLBLO0 2 /* CP0: TLB EntryLo0 */ -+#define C0_TLBLO C0_TLBLO0 /* CP0: TLB EntryLo0 */ -+#define C0_TLBLO1 3 /* CP0: TLB EntryLo1 */ -+#define C0_CTEXT 4 /* CP0: Context */ -+#define C0_PGMASK 5 /* CP0: TLB PageMask */ -+#define C0_WIRED 6 /* CP0: TLB Wired */ -+#define C0_BADVADDR 8 /* CP0: Bad Virtual Address */ -+#define C0_COUNT 9 /* CP0: Count */ -+#define C0_TLBHI 10 /* CP0: TLB EntryHi */ -+#define C0_COMPARE 11 /* CP0: Compare */ -+#define C0_SR 12 /* CP0: Processor Status */ -+#define C0_STATUS C0_SR /* CP0: Processor Status */ -+#define C0_CAUSE 13 /* CP0: Exception Cause */ -+#define C0_EPC 14 /* CP0: Exception PC */ -+#define C0_PRID 15 /* CP0: Processor Revision Indentifier */ -+#define C0_CONFIG 16 /* CP0: Config */ -+#define C0_LLADDR 17 /* CP0: LLAddr */ -+#define C0_WATCHLO 18 /* CP0: WatchpointLo */ -+#define C0_WATCHHI 19 /* CP0: WatchpointHi */ -+#define C0_XCTEXT 20 /* CP0: XContext */ -+#define C0_DIAGNOSTIC 22 /* CP0: Diagnostic */ -+#define C0_BROADCOM C0_DIAGNOSTIC /* CP0: Broadcom Register */ -+#define C0_PERFORMANCE 25 /* CP0: Performance Counter/Control Registers */ -+#define C0_ECC 26 /* CP0: ECC */ -+#define C0_CACHEERR 27 /* CP0: CacheErr */ -+#define C0_TAGLO 28 /* CP0: TagLo */ -+#define C0_TAGHI 29 /* CP0: TagHi */ -+#define C0_ERREPC 30 /* CP0: ErrorEPC */ -+#define C0_DESAVE 31 /* CP0: DebugSave */ -+ -+#endif /* _LANGUAGE_ASSEMBLY */ -+ -+/* -+ * Memory segments (32bit kernel mode addresses) -+ */ -+#undef KUSEG -+#undef KSEG0 -+#undef KSEG1 -+#undef KSEG2 -+#undef KSEG3 -+#define KUSEG 0x00000000 -+#define KSEG0 0x80000000 -+#define KSEG1 0xa0000000 -+#define KSEG2 0xc0000000 -+#define KSEG3 0xe0000000 -+#define PHYSADDR_MASK 0x1fffffff -+ -+/* -+ * Map an address to a certain kernel segment -+ */ -+#undef PHYSADDR -+#undef KSEG0ADDR -+#undef KSEG1ADDR -+#undef KSEG2ADDR -+#undef KSEG3ADDR -+ -+#define PHYSADDR(a) (_ULCAST_(a) & PHYSADDR_MASK) -+#define KSEG0ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG0) -+#define KSEG1ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG1) -+#define KSEG2ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG2) -+#define KSEG3ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG3) -+ -+ -+#ifndef Index_Invalidate_I -+/* -+ * Cache Operations -+ */ -+#define Index_Invalidate_I 0x00 -+#define Index_Writeback_Inv_D 0x01 -+#define Index_Invalidate_SI 0x02 -+#define Index_Writeback_Inv_SD 0x03 -+#define Index_Load_Tag_I 0x04 -+#define Index_Load_Tag_D 0x05 -+#define Index_Load_Tag_SI 0x06 -+#define Index_Load_Tag_SD 0x07 -+#define Index_Store_Tag_I 0x08 -+#define Index_Store_Tag_D 0x09 -+#define Index_Store_Tag_SI 0x0A -+#define Index_Store_Tag_SD 0x0B -+#define Create_Dirty_Excl_D 0x0d -+#define Create_Dirty_Excl_SD 0x0f -+#define Hit_Invalidate_I 0x10 -+#define Hit_Invalidate_D 0x11 -+#define Hit_Invalidate_SI 0x12 -+#define Hit_Invalidate_SD 0x13 -+#define Fill_I 0x14 -+#define Hit_Writeback_Inv_D 0x15 -+ /* 0x16 is unused */ -+#define Hit_Writeback_Inv_SD 0x17 -+#define R5K_Page_Invalidate_S 0x17 -+#define Hit_Writeback_I 0x18 -+#define Hit_Writeback_D 0x19 -+ /* 0x1a is unused */ -+#define Hit_Writeback_SD 0x1b -+ /* 0x1c is unused */ -+ /* 0x1e is unused */ -+#define Hit_Set_Virtual_SI 0x1e -+#define Hit_Set_Virtual_SD 0x1f -+#endif -+ -+ -+/* -+ * R4x00 interrupt enable / cause bits -+ */ -+#define IE_SW0 (_ULCAST_(1) << 8) -+#define IE_SW1 (_ULCAST_(1) << 9) -+#define IE_IRQ0 (_ULCAST_(1) << 10) -+#define IE_IRQ1 (_ULCAST_(1) << 11) -+#define IE_IRQ2 (_ULCAST_(1) << 12) -+#define IE_IRQ3 (_ULCAST_(1) << 13) -+#define IE_IRQ4 (_ULCAST_(1) << 14) -+#define IE_IRQ5 (_ULCAST_(1) << 15) -+ -+#ifndef ST0_UM -+/* -+ * Bitfields in the mips32 cp0 status register -+ */ -+#define ST0_IE 0x00000001 -+#define ST0_EXL 0x00000002 -+#define ST0_ERL 0x00000004 -+#define ST0_UM 0x00000010 -+#define ST0_SWINT0 0x00000100 -+#define ST0_SWINT1 0x00000200 -+#define ST0_HWINT0 0x00000400 -+#define ST0_HWINT1 0x00000800 -+#define ST0_HWINT2 0x00001000 -+#define ST0_HWINT3 0x00002000 -+#define ST0_HWINT4 0x00004000 -+#define ST0_HWINT5 0x00008000 -+#define ST0_IM 0x0000ff00 -+#define ST0_NMI 0x00080000 -+#define ST0_SR 0x00100000 -+#define ST0_TS 0x00200000 -+#define ST0_BEV 0x00400000 -+#define ST0_RE 0x02000000 -+#define ST0_RP 0x08000000 -+#define ST0_CU 0xf0000000 -+#define ST0_CU0 0x10000000 -+#define ST0_CU1 0x20000000 -+#define ST0_CU2 0x40000000 -+#define ST0_CU3 0x80000000 -+#endif -+ -+ -+/* -+ * Bitfields in the mips32 cp0 cause register -+ */ -+#define C_EXC 0x0000007c -+#define C_EXC_SHIFT 2 -+#define C_INT 0x0000ff00 -+#define C_INT_SHIFT 8 -+#define C_SW0 (_ULCAST_(1) << 8) -+#define C_SW1 (_ULCAST_(1) << 9) -+#define C_IRQ0 (_ULCAST_(1) << 10) -+#define C_IRQ1 (_ULCAST_(1) << 11) -+#define C_IRQ2 (_ULCAST_(1) << 12) -+#define C_IRQ3 (_ULCAST_(1) << 13) -+#define C_IRQ4 (_ULCAST_(1) << 14) -+#define C_IRQ5 (_ULCAST_(1) << 15) -+#define C_WP 0x00400000 -+#define C_IV 0x00800000 -+#define C_CE 0x30000000 -+#define C_CE_SHIFT 28 -+#define C_BD 0x80000000 -+ -+/* Values in C_EXC */ -+#define EXC_INT 0 -+#define EXC_TLBM 1 -+#define EXC_TLBL 2 -+#define EXC_TLBS 3 -+#define EXC_AEL 4 -+#define EXC_AES 5 -+#define EXC_IBE 6 -+#define EXC_DBE 7 -+#define EXC_SYS 8 -+#define EXC_BPT 9 -+#define EXC_RI 10 -+#define EXC_CU 11 -+#define EXC_OV 12 -+#define EXC_TR 13 -+#define EXC_WATCH 23 -+#define EXC_MCHK 24 -+ -+ -+/* -+ * Bits in the cp0 config register. -+ */ -+#define CONF_CM_CACHABLE_NO_WA 0 -+#define CONF_CM_CACHABLE_WA 1 -+#define CONF_CM_UNCACHED 2 -+#define CONF_CM_CACHABLE_NONCOHERENT 3 -+#define CONF_CM_CACHABLE_CE 4 -+#define CONF_CM_CACHABLE_COW 5 -+#define CONF_CM_CACHABLE_CUW 6 -+#define CONF_CM_CACHABLE_ACCELERATED 7 -+#define CONF_CM_CMASK 7 -+#define CONF_CU (_ULCAST_(1) << 3) -+#define CONF_DB (_ULCAST_(1) << 4) -+#define CONF_IB (_ULCAST_(1) << 5) -+#define CONF_SE (_ULCAST_(1) << 12) -+#define CONF_SC (_ULCAST_(1) << 17) -+#define CONF_AC (_ULCAST_(1) << 23) -+#define CONF_HALT (_ULCAST_(1) << 25) -+ -+ -+/* -+ * Bits in the cp0 config register select 1. -+ */ -+#define CONF1_FP 0x00000001 /* FPU present */ -+#define CONF1_EP 0x00000002 /* EJTAG present */ -+#define CONF1_CA 0x00000004 /* mips16 implemented */ -+#define CONF1_WR 0x00000008 /* Watch registers present */ -+#define CONF1_PC 0x00000010 /* Performance counters present */ -+#define CONF1_DA_SHIFT 7 /* D$ associativity */ -+#define CONF1_DA_MASK 0x00000380 -+#define CONF1_DA_BASE 1 -+#define CONF1_DL_SHIFT 10 /* D$ line size */ -+#define CONF1_DL_MASK 0x00001c00 -+#define CONF1_DL_BASE 2 -+#define CONF1_DS_SHIFT 13 /* D$ sets/way */ -+#define CONF1_DS_MASK 0x0000e000 -+#define CONF1_DS_BASE 64 -+#define CONF1_IA_SHIFT 16 /* I$ associativity */ -+#define CONF1_IA_MASK 0x00070000 -+#define CONF1_IA_BASE 1 -+#define CONF1_IL_SHIFT 19 /* I$ line size */ -+#define CONF1_IL_MASK 0x00380000 -+#define CONF1_IL_BASE 2 -+#define CONF1_IS_SHIFT 22 /* Instruction cache sets/way */ -+#define CONF1_IS_MASK 0x01c00000 -+#define CONF1_IS_BASE 64 -+#define CONF1_MS_MASK 0x7e000000 /* Number of tlb entries */ -+#define CONF1_MS_SHIFT 25 -+ -+/* PRID register */ -+#define PRID_COPT_MASK 0xff000000 -+#define PRID_COMP_MASK 0x00ff0000 -+#define PRID_IMP_MASK 0x0000ff00 -+#define PRID_REV_MASK 0x000000ff -+ -+#define PRID_COMP_LEGACY 0x000000 -+#define PRID_COMP_MIPS 0x010000 -+#define PRID_COMP_BROADCOM 0x020000 -+#define PRID_COMP_ALCHEMY 0x030000 -+#define PRID_COMP_SIBYTE 0x040000 -+#define PRID_IMP_BCM4710 0x4000 -+#define PRID_IMP_BCM3302 0x9000 -+#define PRID_IMP_BCM3303 0x9100 -+ -+#define PRID_IMP_UNKNOWN 0xff00 -+ -+#define BCM330X(id) \ -+ (((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == (PRID_COMP_BROADCOM | PRID_IMP_BCM3302)) \ -+ || ((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == (PRID_COMP_BROADCOM | PRID_IMP_BCM3303))) -+ -+/* Bits in C0_BROADCOM */ -+#define BRCM_PFC_AVAIL 0x20000000 /* PFC is available */ -+#define BRCM_DC_ENABLE 0x40000000 /* Enable Data $ */ -+#define BRCM_IC_ENABLE 0x80000000 /* Enable Instruction $ */ -+#define BRCM_PFC_ENABLE 0x00400000 /* Obsolete? Enable PFC (at least on 4310) */ -+ -+/* PreFetch Cache aka Read Ahead Cache */ -+ -+#define PFC_CR0 0xff400000 /* control reg 0 */ -+#define PFC_CR1 0xff400004 /* control reg 1 */ -+ -+/* PFC operations */ -+#define PFC_I 0x00000001 /* Enable PFC use for instructions */ -+#define PFC_D 0x00000002 /* Enable PFC use for data */ -+#define PFC_PFI 0x00000004 /* Enable seq. prefetch for instructions */ -+#define PFC_PFD 0x00000008 /* Enable seq. prefetch for data */ -+#define PFC_CINV 0x00000010 /* Enable selective (i/d) cacheop flushing */ -+#define PFC_NCH 0x00000020 /* Disable flushing based on cacheops */ -+#define PFC_DPF 0x00000040 /* Enable directional prefetching */ -+#define PFC_FLUSH 0x00000100 /* Flush the PFC */ -+#define PFC_BRR 0x40000000 /* Bus error indication */ -+#define PFC_PWR 0x80000000 /* Disable power saving (clock gating) */ -+ -+/* Handy defaults */ -+#define PFC_DISABLED 0 -+#define PFC_AUTO 0xffffffff /* auto select the default mode */ -+#define PFC_INST (PFC_I | PFC_PFI | PFC_CINV) -+#define PFC_INST_NOPF (PFC_I | PFC_CINV) -+#define PFC_DATA (PFC_D | PFC_PFD | PFC_CINV) -+#define PFC_DATA_NOPF (PFC_D | PFC_CINV) -+#define PFC_I_AND_D (PFC_INST | PFC_DATA) -+#define PFC_I_AND_D_NOPF (PFC_INST_NOPF | PFC_DATA_NOPF) -+ -+ -+/* -+ * These are the UART port assignments, expressed as offsets from the base -+ * register. These assignments should hold for any serial port based on -+ * a 8250, 16450, or 16550(A). -+ */ -+ -+#define UART_RX 0 /* In: Receive buffer (DLAB=0) */ -+#define UART_TX 0 /* Out: Transmit buffer (DLAB=0) */ -+#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */ -+#define UART_DLM 1 /* Out: Divisor Latch High (DLAB=1) */ -+#define UART_LCR 3 /* Out: Line Control Register */ -+#define UART_MCR 4 /* Out: Modem Control Register */ -+#define UART_LSR 5 /* In: Line Status Register */ -+#define UART_MSR 6 /* In: Modem Status Register */ -+#define UART_SCR 7 /* I/O: Scratch Register */ -+#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ -+#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ -+#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ -+#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */ -+#define UART_LSR_RXRDY 0x01 /* Receiver ready */ -+ -+ -+#ifndef _LANGUAGE_ASSEMBLY -+ -+/* -+ * Macros to access the system control coprocessor -+ */ -+ -+#define MFC0(source, sel) \ -+({ \ -+ int __res; \ -+ __asm__ __volatile__( \ -+ ".set\tnoreorder\n\t" \ -+ ".set\tnoat\n\t" \ -+ ".word\t"STR(0x40010000 | ((source)<<11) | (sel))"\n\t" \ -+ "move\t%0,$1\n\t" \ -+ ".set\tat\n\t" \ -+ ".set\treorder" \ -+ :"=r" (__res) \ -+ : \ -+ :"$1"); \ -+ __res; \ -+}) -+ -+#define MTC0(source, sel, value) \ -+do { \ -+ __asm__ __volatile__( \ -+ ".set\tnoreorder\n\t" \ -+ ".set\tnoat\n\t" \ -+ "move\t$1,%z0\n\t" \ -+ ".word\t"STR(0x40810000 | ((source)<<11) | (sel))"\n\t" \ -+ ".set\tat\n\t" \ -+ ".set\treorder" \ -+ : \ -+ :"jr" (value) \ -+ :"$1"); \ -+} while (0) -+ -+#define get_c0_count() \ -+({ \ -+ int __res; \ -+ __asm__ __volatile__( \ -+ ".set\tnoreorder\n\t" \ -+ ".set\tnoat\n\t" \ -+ "mfc0\t%0,$9\n\t" \ -+ ".set\tat\n\t" \ -+ ".set\treorder" \ -+ :"=r" (__res)); \ -+ __res; \ -+}) -+ -+static INLINE void icache_probe(uint32 config1, uint *size, uint *lsize) -+{ -+ uint lsz, sets, ways; -+ -+ /* Instruction Cache Size = Associativity * Line Size * Sets Per Way */ -+ if ((lsz = ((config1 & CONF1_IL_MASK) >> CONF1_IL_SHIFT))) -+ lsz = CONF1_IL_BASE << lsz; -+ sets = CONF1_IS_BASE << ((config1 & CONF1_IS_MASK) >> CONF1_IS_SHIFT); -+ ways = CONF1_IA_BASE + ((config1 & CONF1_IA_MASK) >> CONF1_IA_SHIFT); -+ *size = lsz * sets * ways; -+ *lsize = lsz; -+} -+ -+static INLINE void dcache_probe(uint32 config1, uint *size, uint *lsize) -+{ -+ uint lsz, sets, ways; -+ -+ /* Data Cache Size = Associativity * Line Size * Sets Per Way */ -+ if ((lsz = ((config1 & CONF1_DL_MASK) >> CONF1_DL_SHIFT))) -+ lsz = CONF1_DL_BASE << lsz; -+ sets = CONF1_DS_BASE << ((config1 & CONF1_DS_MASK) >> CONF1_DS_SHIFT); -+ ways = CONF1_DA_BASE + ((config1 & CONF1_DA_MASK) >> CONF1_DA_SHIFT); -+ *size = lsz * sets * ways; -+ *lsize = lsz; -+} -+ -+#define cache_op(base, op) \ -+ __asm__ __volatile__(" \ -+ .set noreorder; \ -+ .set mips3; \ -+ cache %1, (%0); \ -+ .set mips0; \ -+ .set reorder" \ -+ : \ -+ : "r" (base), \ -+ "i" (op)); -+ -+#define cache_unroll4(base, delta, op) \ -+ __asm__ __volatile__(" \ -+ .set noreorder; \ -+ .set mips3; \ -+ cache %1,0(%0); \ -+ cache %1,delta(%0); \ -+ cache %1,(2 * delta)(%0); \ -+ cache %1,(3 * delta)(%0); \ -+ .set mips0; \ -+ .set reorder" \ -+ : \ -+ : "r" (base), \ -+ "i" (op)); -+ -+#endif /* !_LANGUAGE_ASSEMBLY */ -+ -+#endif /* _MISPINC_H */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/nvports.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/nvports.h ---- linux-2.4.32/arch/mips/bcm947xx/include/nvports.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/nvports.h 2005-12-16 23:39:10.748824500 +0100 -@@ -0,0 +1,55 @@ -+/* -+ * BCM53xx RoboSwitch utility functions -+ * -+ * Copyright (C) 2002 Broadcom Corporation -+ * $Id$ -+ */ -+ -+#ifndef _nvports_h_ -+#define _nvports_h_ -+ -+#define uint32 unsigned long -+#define uint16 unsigned short -+#define uint unsigned int -+#define uint8 unsigned char -+#define uint64 unsigned long long -+ -+enum FORCE_PORT { -+ FORCE_OFF, -+ FORCE_10H, -+ FORCE_10F, -+ FORCE_100H, -+ FORCE_100F, -+ FORCE_DOWN, -+ POWER_OFF -+}; -+ -+typedef struct _PORT_ATTRIBS -+{ -+ uint autoneg; -+ uint force; -+ uint native; -+} PORT_ATTRIBS; -+ -+extern uint -+nvExistsPortAttrib(char *attrib, uint portno); -+ -+extern int -+nvExistsAnyForcePortAttrib(uint portno); -+ -+extern void -+nvSetPortAttrib(char *attrib, uint portno); -+ -+extern void -+nvUnsetPortAttrib(char *attrib, uint portno); -+ -+extern void -+nvUnsetAllForcePortAttrib(uint portno); -+ -+extern PORT_ATTRIBS -+nvGetSwitchPortAttribs(uint portno); -+ -+#endif /* _nvports_h_ */ -+ -+ -+ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/osl.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/osl.h ---- linux-2.4.32/arch/mips/bcm947xx/include/osl.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/osl.h 2005-12-16 23:39:10.748824500 +0100 -@@ -0,0 +1,42 @@ -+/* -+ * OS Abstraction Layer -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * $Id$ -+ */ -+ -+#ifndef _osl_h_ -+#define _osl_h_ -+ -+/* osl handle type forward declaration */ -+typedef struct os_handle osl_t; -+ -+#if defined(linux) -+#include -+#elif defined(NDIS) -+#include -+#elif defined(_CFE_) -+#include -+#elif defined(_HNDRTE_) -+#include -+#elif defined(_MINOSL_) -+#include -+#elif PMON -+#include -+#elif defined(MACOSX) -+#include -+#else -+#error "Unsupported OSL requested" -+#endif -+ -+/* handy */ -+#define SET_REG(r, mask, val) W_REG((r), ((R_REG(r) & ~(mask)) | (val))) -+#define MAXPRIO 7 /* 0-7 */ -+ -+#endif /* _osl_h_ */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/pcicfg.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/pcicfg.h ---- linux-2.4.32/arch/mips/bcm947xx/include/pcicfg.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/pcicfg.h 2005-12-16 23:39:10.752824750 +0100 -@@ -0,0 +1,451 @@ -+/* -+ * pcicfg.h: PCI configuration constants and structures. -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ -+ */ -+ -+#ifndef _h_pci_ -+#define _h_pci_ -+ -+/* The following inside ifndef's so we don't collide with NTDDK.H */ -+#ifndef PCI_MAX_BUS -+#define PCI_MAX_BUS 0x100 -+#endif -+#ifndef PCI_MAX_DEVICES -+#define PCI_MAX_DEVICES 0x20 -+#endif -+#ifndef PCI_MAX_FUNCTION -+#define PCI_MAX_FUNCTION 0x8 -+#endif -+ -+#ifndef PCI_INVALID_VENDORID -+#define PCI_INVALID_VENDORID 0xffff -+#endif -+#ifndef PCI_INVALID_DEVICEID -+#define PCI_INVALID_DEVICEID 0xffff -+#endif -+ -+ -+/* Convert between bus-slot-function-register and config addresses */ -+ -+#define PCICFG_BUS_SHIFT 16 /* Bus shift */ -+#define PCICFG_SLOT_SHIFT 11 /* Slot shift */ -+#define PCICFG_FUN_SHIFT 8 /* Function shift */ -+#define PCICFG_OFF_SHIFT 0 /* Register shift */ -+ -+#define PCICFG_BUS_MASK 0xff /* Bus mask */ -+#define PCICFG_SLOT_MASK 0x1f /* Slot mask */ -+#define PCICFG_FUN_MASK 7 /* Function mask */ -+#define PCICFG_OFF_MASK 0xff /* Bus mask */ -+ -+#define PCI_CONFIG_ADDR(b, s, f, o) \ -+ ((((b) & PCICFG_BUS_MASK) << PCICFG_BUS_SHIFT) \ -+ | (((s) & PCICFG_SLOT_MASK) << PCICFG_SLOT_SHIFT) \ -+ | (((f) & PCICFG_FUN_MASK) << PCICFG_FUN_SHIFT) \ -+ | (((o) & PCICFG_OFF_MASK) << PCICFG_OFF_SHIFT)) -+ -+#define PCI_CONFIG_BUS(a) (((a) >> PCICFG_BUS_SHIFT) & PCICFG_BUS_MASK) -+#define PCI_CONFIG_SLOT(a) (((a) >> PCICFG_SLOT_SHIFT) & PCICFG_SLOT_MASK) -+#define PCI_CONFIG_FUN(a) (((a) >> PCICFG_FUN_SHIFT) & PCICFG_FUN_MASK) -+#define PCI_CONFIG_OFF(a) (((a) >> PCICFG_OFF_SHIFT) & PCICFG_OFF_MASK) -+ -+/* PCIE Config space accessing MACROS*/ -+ -+#define PCIECFG_BUS_SHIFT 24 /* Bus shift */ -+#define PCIECFG_SLOT_SHIFT 19 /* Slot/Device shift */ -+#define PCIECFG_FUN_SHIFT 16 /* Function shift */ -+#define PCIECFG_OFF_SHIFT 0 /* Register shift */ -+ -+#define PCIECFG_BUS_MASK 0xff /* Bus mask */ -+#define PCIECFG_SLOT_MASK 0x1f /* Slot/Device mask */ -+#define PCIECFG_FUN_MASK 7 /* Function mask */ -+#define PCIECFG_OFF_MASK 0x3ff /* Register mask */ -+ -+#define PCIE_CONFIG_ADDR(b, s, f, o) \ -+ ((((b) & PCIECFG_BUS_MASK) << PCIECFG_BUS_SHIFT) \ -+ | (((s) & PCIECFG_SLOT_MASK) << PCIECFG_SLOT_SHIFT) \ -+ | (((f) & PCIECFG_FUN_MASK) << PCIECFG_FUN_SHIFT) \ -+ | (((o) & PCIECFG_OFF_MASK) << PCIECFG_OFF_SHIFT)) -+ -+#define PCIE_CONFIG_BUS(a) (((a) >> PCIECFG_BUS_SHIFT) & PCIECFG_BUS_MASK) -+#define PCIE_CONFIG_SLOT(a) (((a) >> PCIECFG_SLOT_SHIFT) & PCIECFG_SLOT_MASK) -+#define PCIE_CONFIG_FUN(a) (((a) >> PCIECFG_FUN_SHIFT) & PCIECFG_FUN_MASK) -+#define PCIE_CONFIG_OFF(a) (((a) >> PCIECFG_OFF_SHIFT) & PCIECFG_OFF_MASK) -+ -+ -+/* The actual config space */ -+ -+#define PCI_BAR_MAX 6 -+ -+#define PCI_ROM_BAR 8 -+ -+#define PCR_RSVDA_MAX 2 -+ -+/* pci config status reg has a bit to indicate that capability ptr is present*/ -+ -+#define PCI_CAPPTR_PRESENT 0x0010 -+ -+typedef struct _pci_config_regs { -+ unsigned short vendor; -+ unsigned short device; -+ unsigned short command; -+ unsigned short status; -+ unsigned char rev_id; -+ unsigned char prog_if; -+ unsigned char sub_class; -+ unsigned char base_class; -+ unsigned char cache_line_size; -+ unsigned char latency_timer; -+ unsigned char header_type; -+ unsigned char bist; -+ unsigned long base[PCI_BAR_MAX]; -+ unsigned long cardbus_cis; -+ unsigned short subsys_vendor; -+ unsigned short subsys_id; -+ unsigned long baserom; -+ unsigned long rsvd_a[PCR_RSVDA_MAX]; -+ unsigned char int_line; -+ unsigned char int_pin; -+ unsigned char min_gnt; -+ unsigned char max_lat; -+ unsigned char dev_dep[192]; -+} pci_config_regs; -+ -+#define SZPCR (sizeof (pci_config_regs)) -+#define MINSZPCR 64 /* offsetof (dev_dep[0] */ -+ -+/* A structure for the config registers is nice, but in most -+ * systems the config space is not memory mapped, so we need -+ * filed offsetts. :-( -+ */ -+#define PCI_CFG_VID 0 -+#define PCI_CFG_DID 2 -+#define PCI_CFG_CMD 4 -+#define PCI_CFG_STAT 6 -+#define PCI_CFG_REV 8 -+#define PCI_CFG_PROGIF 9 -+#define PCI_CFG_SUBCL 0xa -+#define PCI_CFG_BASECL 0xb -+#define PCI_CFG_CLSZ 0xc -+#define PCI_CFG_LATTIM 0xd -+#define PCI_CFG_HDR 0xe -+#define PCI_CFG_BIST 0xf -+#define PCI_CFG_BAR0 0x10 -+#define PCI_CFG_BAR1 0x14 -+#define PCI_CFG_BAR2 0x18 -+#define PCI_CFG_BAR3 0x1c -+#define PCI_CFG_BAR4 0x20 -+#define PCI_CFG_BAR5 0x24 -+#define PCI_CFG_CIS 0x28 -+#define PCI_CFG_SVID 0x2c -+#define PCI_CFG_SSID 0x2e -+#define PCI_CFG_ROMBAR 0x30 -+#define PCI_CFG_CAPPTR 0x34 -+#define PCI_CFG_INT 0x3c -+#define PCI_CFG_PIN 0x3d -+#define PCI_CFG_MINGNT 0x3e -+#define PCI_CFG_MAXLAT 0x3f -+ -+/* Classes and subclasses */ -+ -+typedef enum { -+ PCI_CLASS_OLD = 0, -+ PCI_CLASS_DASDI, -+ PCI_CLASS_NET, -+ PCI_CLASS_DISPLAY, -+ PCI_CLASS_MMEDIA, -+ PCI_CLASS_MEMORY, -+ PCI_CLASS_BRIDGE, -+ PCI_CLASS_COMM, -+ PCI_CLASS_BASE, -+ PCI_CLASS_INPUT, -+ PCI_CLASS_DOCK, -+ PCI_CLASS_CPU, -+ PCI_CLASS_SERIAL, -+ PCI_CLASS_INTELLIGENT = 0xe, -+ PCI_CLASS_SATELLITE, -+ PCI_CLASS_CRYPT, -+ PCI_CLASS_DSP, -+ PCI_CLASS_MAX -+} pci_classes; -+ -+typedef enum { -+ PCI_DASDI_SCSI, -+ PCI_DASDI_IDE, -+ PCI_DASDI_FLOPPY, -+ PCI_DASDI_IPI, -+ PCI_DASDI_RAID, -+ PCI_DASDI_OTHER = 0x80 -+} pci_dasdi_subclasses; -+ -+typedef enum { -+ PCI_NET_ETHER, -+ PCI_NET_TOKEN, -+ PCI_NET_FDDI, -+ PCI_NET_ATM, -+ PCI_NET_OTHER = 0x80 -+} pci_net_subclasses; -+ -+typedef enum { -+ PCI_DISPLAY_VGA, -+ PCI_DISPLAY_XGA, -+ PCI_DISPLAY_3D, -+ PCI_DISPLAY_OTHER = 0x80 -+} pci_display_subclasses; -+ -+typedef enum { -+ PCI_MMEDIA_VIDEO, -+ PCI_MMEDIA_AUDIO, -+ PCI_MMEDIA_PHONE, -+ PCI_MEDIA_OTHER = 0x80 -+} pci_mmedia_subclasses; -+ -+typedef enum { -+ PCI_MEMORY_RAM, -+ PCI_MEMORY_FLASH, -+ PCI_MEMORY_OTHER = 0x80 -+} pci_memory_subclasses; -+ -+typedef enum { -+ PCI_BRIDGE_HOST, -+ PCI_BRIDGE_ISA, -+ PCI_BRIDGE_EISA, -+ PCI_BRIDGE_MC, -+ PCI_BRIDGE_PCI, -+ PCI_BRIDGE_PCMCIA, -+ PCI_BRIDGE_NUBUS, -+ PCI_BRIDGE_CARDBUS, -+ PCI_BRIDGE_RACEWAY, -+ PCI_BRIDGE_OTHER = 0x80 -+} pci_bridge_subclasses; -+ -+typedef enum { -+ PCI_COMM_UART, -+ PCI_COMM_PARALLEL, -+ PCI_COMM_MULTIUART, -+ PCI_COMM_MODEM, -+ PCI_COMM_OTHER = 0x80 -+} pci_comm_subclasses; -+ -+typedef enum { -+ PCI_BASE_PIC, -+ PCI_BASE_DMA, -+ PCI_BASE_TIMER, -+ PCI_BASE_RTC, -+ PCI_BASE_PCI_HOTPLUG, -+ PCI_BASE_OTHER = 0x80 -+} pci_base_subclasses; -+ -+typedef enum { -+ PCI_INPUT_KBD, -+ PCI_INPUT_PEN, -+ PCI_INPUT_MOUSE, -+ PCI_INPUT_SCANNER, -+ PCI_INPUT_GAMEPORT, -+ PCI_INPUT_OTHER = 0x80 -+} pci_input_subclasses; -+ -+typedef enum { -+ PCI_DOCK_GENERIC, -+ PCI_DOCK_OTHER = 0x80 -+} pci_dock_subclasses; -+ -+typedef enum { -+ PCI_CPU_386, -+ PCI_CPU_486, -+ PCI_CPU_PENTIUM, -+ PCI_CPU_ALPHA = 0x10, -+ PCI_CPU_POWERPC = 0x20, -+ PCI_CPU_MIPS = 0x30, -+ PCI_CPU_COPROC = 0x40, -+ PCI_CPU_OTHER = 0x80 -+} pci_cpu_subclasses; -+ -+typedef enum { -+ PCI_SERIAL_IEEE1394, -+ PCI_SERIAL_ACCESS, -+ PCI_SERIAL_SSA, -+ PCI_SERIAL_USB, -+ PCI_SERIAL_FIBER, -+ PCI_SERIAL_SMBUS, -+ PCI_SERIAL_OTHER = 0x80 -+} pci_serial_subclasses; -+ -+typedef enum { -+ PCI_INTELLIGENT_I2O, -+} pci_intelligent_subclasses; -+ -+typedef enum { -+ PCI_SATELLITE_TV, -+ PCI_SATELLITE_AUDIO, -+ PCI_SATELLITE_VOICE, -+ PCI_SATELLITE_DATA, -+ PCI_SATELLITE_OTHER = 0x80 -+} pci_satellite_subclasses; -+ -+typedef enum { -+ PCI_CRYPT_NETWORK, -+ PCI_CRYPT_ENTERTAINMENT, -+ PCI_CRYPT_OTHER = 0x80 -+} pci_crypt_subclasses; -+ -+typedef enum { -+ PCI_DSP_DPIO, -+ PCI_DSP_OTHER = 0x80 -+} pci_dsp_subclasses; -+ -+/* Header types */ -+typedef enum { -+ PCI_HEADER_NORMAL, -+ PCI_HEADER_BRIDGE, -+ PCI_HEADER_CARDBUS -+} pci_header_types; -+ -+ -+/* Overlay for a PCI-to-PCI bridge */ -+ -+#define PPB_RSVDA_MAX 2 -+#define PPB_RSVDD_MAX 8 -+ -+typedef struct _ppb_config_regs { -+ unsigned short vendor; -+ unsigned short device; -+ unsigned short command; -+ unsigned short status; -+ unsigned char rev_id; -+ unsigned char prog_if; -+ unsigned char sub_class; -+ unsigned char base_class; -+ unsigned char cache_line_size; -+ unsigned char latency_timer; -+ unsigned char header_type; -+ unsigned char bist; -+ unsigned long rsvd_a[PPB_RSVDA_MAX]; -+ unsigned char prim_bus; -+ unsigned char sec_bus; -+ unsigned char sub_bus; -+ unsigned char sec_lat; -+ unsigned char io_base; -+ unsigned char io_lim; -+ unsigned short sec_status; -+ unsigned short mem_base; -+ unsigned short mem_lim; -+ unsigned short pf_mem_base; -+ unsigned short pf_mem_lim; -+ unsigned long pf_mem_base_hi; -+ unsigned long pf_mem_lim_hi; -+ unsigned short io_base_hi; -+ unsigned short io_lim_hi; -+ unsigned short subsys_vendor; -+ unsigned short subsys_id; -+ unsigned long rsvd_b; -+ unsigned char rsvd_c; -+ unsigned char int_pin; -+ unsigned short bridge_ctrl; -+ unsigned char chip_ctrl; -+ unsigned char diag_ctrl; -+ unsigned short arb_ctrl; -+ unsigned long rsvd_d[PPB_RSVDD_MAX]; -+ unsigned char dev_dep[192]; -+} ppb_config_regs; -+ -+ -+/* PCI CAPABILITY DEFINES */ -+#define PCI_CAP_POWERMGMTCAP_ID 0x01 -+#define PCI_CAP_MSICAP_ID 0x05 -+#define PCI_CAP_PCIECAP_ID 0x10 ++/* Values in C_EXC */ ++#define EXC_INT 0 ++#define EXC_TLBM 1 ++#define EXC_TLBL 2 ++#define EXC_TLBS 3 ++#define EXC_AEL 4 ++#define EXC_AES 5 ++#define EXC_IBE 6 ++#define EXC_DBE 7 ++#define EXC_SYS 8 ++#define EXC_BPT 9 ++#define EXC_RI 10 ++#define EXC_CU 11 ++#define EXC_OV 12 ++#define EXC_TR 13 ++#define EXC_WATCH 23 ++#define EXC_MCHK 24 + -+/* Data structure to define the Message Signalled Interrupt facility -+ * Valid for PCI and PCIE configurations */ -+typedef struct _pciconfig_cap_msi { -+ unsigned char capID; -+ unsigned char nextptr; -+ unsigned short msgctrl; -+ unsigned int msgaddr; -+} pciconfig_cap_msi; + -+/* Data structure to define the Power managment facility -+ * Valid for PCI and PCIE configurations */ -+typedef struct _pciconfig_cap_pwrmgmt { -+ unsigned char capID; -+ unsigned char nextptr; -+ unsigned short pme_cap; -+ unsigned short pme_sts_ctrl; -+ unsigned char pme_bridge_ext; -+ unsigned char data; -+} pciconfig_cap_pwrmgmt; ++/* ++ * Bits in the cp0 config register. ++ */ ++#define CONF_CM_CACHABLE_NO_WA 0 ++#define CONF_CM_CACHABLE_WA 1 ++#define CONF_CM_UNCACHED 2 ++#define CONF_CM_CACHABLE_NONCOHERENT 3 ++#define CONF_CM_CACHABLE_CE 4 ++#define CONF_CM_CACHABLE_COW 5 ++#define CONF_CM_CACHABLE_CUW 6 ++#define CONF_CM_CACHABLE_ACCELERATED 7 ++#define CONF_CM_CMASK 7 ++#define CONF_CU (_ULCAST_(1) << 3) ++#define CONF_DB (_ULCAST_(1) << 4) ++#define CONF_IB (_ULCAST_(1) << 5) ++#define CONF_SE (_ULCAST_(1) << 12) ++#define CONF_SC (_ULCAST_(1) << 17) ++#define CONF_AC (_ULCAST_(1) << 23) ++#define CONF_HALT (_ULCAST_(1) << 25) + -+/* Data structure to define the PCIE capability */ -+typedef struct _pciconfig_cap_pcie { -+ unsigned char capID; -+ unsigned char nextptr; -+ unsigned short pcie_cap; -+ unsigned int dev_cap; -+ unsigned short dev_ctrl; -+ unsigned short dev_status; -+ unsigned int link_cap; -+ unsigned short link_ctrl; -+ unsigned short link_status; -+} pciconfig_cap_pcie; + -+/* PCIE Enhanced CAPABILITY DEFINES */ -+#define PCIE_EXTCFG_OFFSET 0x100 -+#define PCIE_ADVERRREP_CAPID 0x0001 -+#define PCIE_VC_CAPID 0x0002 -+#define PCIE_DEVSNUM_CAPID 0x0003 -+#define PCIE_PWRBUDGET_CAPID 0x0004 ++/* ++ * Bits in the cp0 config register select 1. ++ */ ++#define CONF1_FP 0x00000001 /* FPU present */ ++#define CONF1_EP 0x00000002 /* EJTAG present */ ++#define CONF1_CA 0x00000004 /* mips16 implemented */ ++#define CONF1_WR 0x00000008 /* Watch registers present */ ++#define CONF1_PC 0x00000010 /* Performance counters present */ ++#define CONF1_DA_SHIFT 7 /* D$ associativity */ ++#define CONF1_DA_MASK 0x00000380 ++#define CONF1_DA_BASE 1 ++#define CONF1_DL_SHIFT 10 /* D$ line size */ ++#define CONF1_DL_MASK 0x00001c00 ++#define CONF1_DL_BASE 2 ++#define CONF1_DS_SHIFT 13 /* D$ sets/way */ ++#define CONF1_DS_MASK 0x0000e000 ++#define CONF1_DS_BASE 64 ++#define CONF1_IA_SHIFT 16 /* I$ associativity */ ++#define CONF1_IA_MASK 0x00070000 ++#define CONF1_IA_BASE 1 ++#define CONF1_IL_SHIFT 19 /* I$ line size */ ++#define CONF1_IL_MASK 0x00380000 ++#define CONF1_IL_BASE 2 ++#define CONF1_IS_SHIFT 22 /* Instruction cache sets/way */ ++#define CONF1_IS_MASK 0x01c00000 ++#define CONF1_IS_BASE 64 ++#define CONF1_MS_MASK 0x7e000000 /* Number of tlb entries */ ++#define CONF1_MS_SHIFT 25 + -+/* Header to define the PCIE specific capabilities in the extended config space */ -+typedef struct _pcie_enhanced_caphdr { -+ unsigned short capID; -+ unsigned short cap_ver : 4; -+ unsigned short next_ptr : 12; -+} pcie_enhanced_caphdr; ++/* PRID register */ ++#define PRID_COPT_MASK 0xff000000 ++#define PRID_COMP_MASK 0x00ff0000 ++#define PRID_IMP_MASK 0x0000ff00 ++#define PRID_REV_MASK 0x000000ff + ++#define PRID_COMP_LEGACY 0x000000 ++#define PRID_COMP_MIPS 0x010000 ++#define PRID_COMP_BROADCOM 0x020000 ++#define PRID_COMP_ALCHEMY 0x030000 ++#define PRID_COMP_SIBYTE 0x040000 ++#define PRID_IMP_BCM4710 0x4000 ++#define PRID_IMP_BCM3302 0x9000 ++#define PRID_IMP_BCM3303 0x9100 + -+/* Everything below is BRCM HND proprietary */ ++#define PRID_IMP_UNKNOWN 0xff00 + -+#define PCI_BAR0_WIN 0x80 /* backplane addres space accessed by BAR0 */ -+#define PCI_BAR1_WIN 0x84 /* backplane addres space accessed by BAR1 */ -+#define PCI_SPROM_CONTROL 0x88 /* sprom property control */ -+#define PCI_BAR1_CONTROL 0x8c /* BAR1 region burst control */ -+#define PCI_INT_STATUS 0x90 /* PCI and other cores interrupts */ -+#define PCI_INT_MASK 0x94 /* mask of PCI and other cores interrupts */ -+#define PCI_TO_SB_MB 0x98 /* signal backplane interrupts */ -+#define PCI_BACKPLANE_ADDR 0xA0 /* address an arbitrary location on the system backplane */ -+#define PCI_BACKPLANE_DATA 0xA4 /* data at the location specified by above address register */ -+#define PCI_GPIO_IN 0xb0 /* pci config space gpio input (>=rev3) */ -+#define PCI_GPIO_OUT 0xb4 /* pci config space gpio output (>=rev3) */ -+#define PCI_GPIO_OUTEN 0xb8 /* pci config space gpio output enable (>=rev3) */ ++#define BCM330X(id) \ ++ (((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == (PRID_COMP_BROADCOM | PRID_IMP_BCM3302)) \ ++ || ((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == (PRID_COMP_BROADCOM | PRID_IMP_BCM3303))) + -+#define PCI_BAR0_SPROM_OFFSET (4 * 1024) /* bar0 + 4K accesses external sprom */ -+#define PCI_BAR0_PCIREGS_OFFSET (6 * 1024) /* bar0 + 6K accesses pci core registers */ ++/* Bits in C0_BROADCOM */ ++#define BRCM_PFC_AVAIL 0x20000000 /* PFC is available */ ++#define BRCM_DC_ENABLE 0x40000000 /* Enable Data $ */ ++#define BRCM_IC_ENABLE 0x80000000 /* Enable Instruction $ */ ++#define BRCM_PFC_ENABLE 0x00400000 /* Obsolete? Enable PFC (at least on 4310) */ + -+/* PCI_INT_STATUS */ -+#define PCI_SBIM_STATUS_SERR 0x4 /* backplane SBErr interrupt status */ ++/* PreFetch Cache aka Read Ahead Cache */ + -+/* PCI_INT_MASK */ -+#define PCI_SBIM_SHIFT 8 /* backplane core interrupt mask bits offset */ -+#define PCI_SBIM_MASK 0xff00 /* backplane core interrupt mask */ -+#define PCI_SBIM_MASK_SERR 0x4 /* backplane SBErr interrupt mask */ ++#define PFC_CR0 0xff400000 /* control reg 0 */ ++#define PFC_CR1 0xff400004 /* control reg 1 */ + -+/* PCI_SPROM_CONTROL */ -+#define SPROM_BLANK 0x04 /* indicating a blank sprom */ -+#define SPROM_WRITEEN 0x10 /* sprom write enable */ -+#define SPROM_BOOTROM_WE 0x20 /* external bootrom write enable */ ++/* PFC operations */ ++#define PFC_I 0x00000001 /* Enable PFC use for instructions */ ++#define PFC_D 0x00000002 /* Enable PFC use for data */ ++#define PFC_PFI 0x00000004 /* Enable seq. prefetch for instructions */ ++#define PFC_PFD 0x00000008 /* Enable seq. prefetch for data */ ++#define PFC_CINV 0x00000010 /* Enable selective (i/d) cacheop flushing */ ++#define PFC_NCH 0x00000020 /* Disable flushing based on cacheops */ ++#define PFC_DPF 0x00000040 /* Enable directional prefetching */ ++#define PFC_FLUSH 0x00000100 /* Flush the PFC */ ++#define PFC_BRR 0x40000000 /* Bus error indication */ ++#define PFC_PWR 0x80000000 /* Disable power saving (clock gating) */ + -+#define SPROM_SIZE 256 /* sprom size in 16-bit */ -+#define SPROM_CRC_RANGE 64 /* crc cover range in 16-bit */ ++/* Handy defaults */ ++#define PFC_DISABLED 0 ++#define PFC_AUTO 0xffffffff /* auto select the default mode */ ++#define PFC_INST (PFC_I | PFC_PFI | PFC_CINV) ++#define PFC_INST_NOPF (PFC_I | PFC_CINV) ++#define PFC_DATA (PFC_D | PFC_PFD | PFC_CINV) ++#define PFC_DATA_NOPF (PFC_D | PFC_CINV) ++#define PFC_I_AND_D (PFC_INST | PFC_DATA) ++#define PFC_I_AND_D_NOPF (PFC_INST_NOPF | PFC_DATA_NOPF) + -+/* PCI_CFG_CMD_STAT */ -+#define PCI_CFG_CMD_STAT_TA 0x08000000 /* target abort status */ + -+#endif -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/pmon_osl.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/pmon_osl.h ---- linux-2.4.32/arch/mips/bcm947xx/include/pmon_osl.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/pmon_osl.h 2005-12-16 23:39:10.752824750 +0100 -@@ -0,0 +1,126 @@ -+/* -+ * MIPS PMON boot loader OS Abstraction Layer. -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation; -+ * the contents of this file may not be disclosed to third parties, copied -+ * or duplicated in any form, in whole or in part, without the prior -+ * written permission of Broadcom Corporation. -+ * $Id$ ++/* ++ * These are the UART port assignments, expressed as offsets from the base ++ * register. These assignments should hold for any serial port based on ++ * a 8250, 16450, or 16550(A). + */ + -+#ifndef _pmon_osl_h_ -+#define _pmon_osl_h_ ++#define UART_RX 0 /* In: Receive buffer (DLAB=0) */ ++#define UART_TX 0 /* Out: Transmit buffer (DLAB=0) */ ++#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */ ++#define UART_DLM 1 /* Out: Divisor Latch High (DLAB=1) */ ++#define UART_LCR 3 /* Out: Line Control Register */ ++#define UART_MCR 4 /* Out: Modem Control Register */ ++#define UART_LSR 5 /* In: Line Status Register */ ++#define UART_MSR 6 /* In: Modem Status Register */ ++#define UART_SCR 7 /* I/O: Scratch Register */ ++#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ ++#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ ++#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ ++#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */ ++#define UART_LSR_RXRDY 0x01 /* Receiver ready */ + -+#include -+#include -+#include -+#include + -+extern int printf(char *fmt,...); -+extern int sprintf(char *dst,char *fmt,...); ++#ifndef _LANGUAGE_ASSEMBLY + -+#define OSL_UNCACHED(va) phy2k1(log2phy((va))) -+#define REG_MAP(pa, size) phy2k1((pa)) -+#define REG_UNMAP(va) /* nop */ ++/* ++ * Macros to access the system control coprocessor ++ */ + -+/* Common macros */ ++#define MFC0(source, sel) \ ++({ \ ++ int __res; \ ++ __asm__ __volatile__( \ ++ ".set\tnoreorder\n\t" \ ++ ".set\tnoat\n\t" \ ++ ".word\t"STR(0x40010000 | ((source)<<11) | (sel))"\n\t" \ ++ "move\t%0,$1\n\t" \ ++ ".set\tat\n\t" \ ++ ".set\treorder" \ ++ :"=r" (__res) \ ++ : \ ++ :"$1"); \ ++ __res; \ ++}) + -+#define BUSPROBE(val, addr) ((val) = *(addr)) ++#define MTC0(source, sel, value) \ ++do { \ ++ __asm__ __volatile__( \ ++ ".set\tnoreorder\n\t" \ ++ ".set\tnoat\n\t" \ ++ "move\t$1,%z0\n\t" \ ++ ".word\t"STR(0x40810000 | ((source)<<11) | (sel))"\n\t" \ ++ ".set\tat\n\t" \ ++ ".set\treorder" \ ++ : \ ++ :"jr" (value) \ ++ :"$1"); \ ++} while (0) + -+#define ASSERT(exp) ++#define get_c0_count() \ ++({ \ ++ int __res; \ ++ __asm__ __volatile__( \ ++ ".set\tnoreorder\n\t" \ ++ ".set\tnoat\n\t" \ ++ "mfc0\t%0,$9\n\t" \ ++ ".set\tat\n\t" \ ++ ".set\treorder" \ ++ :"=r" (__res)); \ ++ __res; \ ++}) + -+#define OSL_PCMCIA_READ_ATTR(osh, offset, buf, size) bzero(buf, size) -+#define OSL_PCMCIA_WRITE_ATTR(osh, offset, buf, size) ++static INLINE void icache_probe(uint32 config1, uint *size, uint *lsize) ++{ ++ uint lsz, sets, ways; + -+/* kludge */ -+#define OSL_PCI_READ_CONFIG(loc, offset, size) ((offset == 8)? 0: 0xffffffff) -+#define OSL_PCI_WRITE_CONFIG(loc, offset, size, val) ASSERT(0) ++ /* Instruction Cache Size = Associativity * Line Size * Sets Per Way */ ++ if ((lsz = ((config1 & CONF1_IL_MASK) >> CONF1_IL_SHIFT))) ++ lsz = CONF1_IL_BASE << lsz; ++ sets = CONF1_IS_BASE << ((config1 & CONF1_IS_MASK) >> CONF1_IS_SHIFT); ++ ways = CONF1_IA_BASE + ((config1 & CONF1_IA_MASK) >> CONF1_IA_SHIFT); ++ *size = lsz * sets * ways; ++ *lsize = lsz; ++} + -+#define wreg32(r,v) (*(volatile uint32 *)(r) = (v)) -+#define rreg32(r) (*(volatile uint32 *)(r)) -+#ifdef IL_BIGENDIAN -+#define wreg16(r,v) (*(volatile uint16 *)((uint32)r^2) = (v)) -+#define rreg16(r) (*(volatile uint16 *)((uint32)r^2)) -+#else -+#define wreg16(r,v) (*(volatile uint16 *)(r) = (v)) -+#define rreg16(r) (*(volatile uint16 *)(r)) -+#endif ++static INLINE void dcache_probe(uint32 config1, uint *size, uint *lsize) ++{ ++ uint lsz, sets, ways; + -+#include -+#define bcopy(src, dst, len) memcpy(dst, src, len) -+#define bcmp(b1, b2, len) memcmp(b1, b2, len) -+#define bzero(b, len) memset(b, '\0', len) ++ /* Data Cache Size = Associativity * Line Size * Sets Per Way */ ++ if ((lsz = ((config1 & CONF1_DL_MASK) >> CONF1_DL_SHIFT))) ++ lsz = CONF1_DL_BASE << lsz; ++ sets = CONF1_DS_BASE << ((config1 & CONF1_DS_MASK) >> CONF1_DS_SHIFT); ++ ways = CONF1_DA_BASE + ((config1 & CONF1_DA_MASK) >> CONF1_DA_SHIFT); ++ *size = lsz * sets * ways; ++ *lsize = lsz; ++} + -+/* register access macros */ -+#define R_REG(r) ((sizeof *(r) == sizeof (uint32))? rreg32(r): rreg16(r)) -+#define W_REG(r,v) ((sizeof *(r) == sizeof (uint32))? wreg32(r,(uint32)v): wreg16(r,(uint16)v)) -+#define AND_REG(r, v) W_REG((r), R_REG(r) & (v)) -+#define OR_REG(r, v) W_REG((r), R_REG(r) | (v)) ++#define cache_op(base, op) \ ++ __asm__ __volatile__(" \ ++ .set noreorder; \ ++ .set mips3; \ ++ cache %1, (%0); \ ++ .set mips0; \ ++ .set reorder" \ ++ : \ ++ : "r" (base), \ ++ "i" (op)); + -+#define R_SM(r) *(r) -+#define W_SM(r, v) (*(r) = (v)) -+#define BZERO_SM(r, len) memset(r, '\0', len) -+ -+/* Host/Bus architecture specific swap. Noop for little endian systems, possible swap on big endian */ -+#define BUS_SWAP32(v) (v) -+ -+#define OSL_DELAY(usec) delay_us(usec) -+extern void delay_us(uint usec); -+ -+#define OSL_GETCYCLES(x) ((x) = 0) -+ -+#define osl_attach(pdev) (pdev) -+#define osl_detach(osh) -+ -+#define MALLOC(osh, size) malloc(size) -+#define MFREE(osh, addr, size) free(addr) -+#define MALLOCED(osh) (0) -+#define MALLOC_DUMP(osh, buf, sz) -+#define MALLOC_FAILED(osh) -+extern void *malloc(); -+extern void free(void *addr); -+ -+#define DMA_CONSISTENT_ALIGN sizeof (int) -+#define DMA_ALLOC_CONSISTENT(osh, size, pap) et_dma_alloc_consistent(osh, size, pap) -+#define DMA_FREE_CONSISTENT(osh, va, size, pa) -+extern void* et_dma_alloc_consistent(void *osh, uint size, ulong *pap); -+#define DMA_TX 0 -+#define DMA_RX 1 -+ -+#define DMA_MAP(osh, va, size, direction, p) osl_dma_map(osh, (void*)va, size, direction) -+#define DMA_UNMAP(osh, pa, size, direction, p) /* nop */ -+extern void* osl_dma_map(void *osh, void *va, uint size, uint direction); -+ -+struct lbuf { -+ struct lbuf *next; /* pointer to next lbuf on freelist */ -+ uchar *buf; /* pointer to buffer */ -+ uint len; /* nbytes of data */ -+}; ++#define cache_unroll4(base, delta, op) \ ++ __asm__ __volatile__(" \ ++ .set noreorder; \ ++ .set mips3; \ ++ cache %1,0(%0); \ ++ cache %1,delta(%0); \ ++ cache %1,(2 * delta)(%0); \ ++ cache %1,(3 * delta)(%0); \ ++ .set mips0; \ ++ .set reorder" \ ++ : \ ++ : "r" (base), \ ++ "i" (op)); + -+/* the largest reasonable packet buffer driver uses for ethernet MTU in bytes */ -+#define PKTBUFSZ 2048 ++#endif /* !_LANGUAGE_ASSEMBLY */ + -+/* packet primitives */ -+#define PKTGET(drv, len, send) et_pktget(drv, len, send) -+#define PKTFREE(drv, lb, send) et_pktfree(drv, (struct lbuf*)lb, send) -+#define PKTDATA(drv, lb) ((uchar*)OSL_UNCACHED(((struct lbuf*)lb)->buf)) -+#define PKTLEN(drv, lb) ((struct lbuf*)lb)->len -+#define PKTHEADROOM(drv, lb) (0) -+#define PKTTAILROOM(drv, lb) (0) -+#define PKTNEXT(drv, lb) NULL -+#define PKTSETNEXT(lb, x) ASSERT(0) -+#define PKTSETLEN(drv, lb, bytes) ((struct lbuf*)lb)->len = bytes -+#define PKTPUSH(drv, lb, bytes) ASSERT(0) -+#define PKTPULL(drv, lb, bytes) ASSERT(0) -+#define PKTDUP(drv, lb) ASSERT(0) -+#define PKTLINK(lb) ((struct lbuf*)lb)->next -+#define PKTSETLINK(lb, x) ((struct lbuf*)lb)->next = (struct lbuf*)x -+#define PKTPRIO(lb) (0) -+#define PKTSETPRIO(lb, x) do {} while (0) -+extern void *et_pktget(void *drv, uint len, bool send); -+extern void et_pktfree(void *drv, struct lbuf *lb, bool send); -+ -+#endif /* _pmon_osl_h_ */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/proto/802.11.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/proto/802.11.h ---- linux-2.4.32/arch/mips/bcm947xx/include/proto/802.11.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/proto/802.11.h 2005-12-16 23:39:10.752824750 +0100 -@@ -0,0 +1,930 @@ ++#endif /* _MISPINC_H */ +diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/osl.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/osl.h +--- linux-2.4.32/arch/mips/bcm947xx/include/osl.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/osl.h 2005-12-16 23:39:10.748824500 +0100 +@@ -0,0 +1,42 @@ +/* ++ * OS Abstraction Layer ++ * + * Copyright 2005, Broadcom Corporation + * All Rights Reserved. + * @@ -5128,934 +3138,44 @@ diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/proto/802.11.h linux-2.4.32-br + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * Fundamental types and constants relating to 802.11 -+ * + * $Id$ + */ + -+#ifndef _802_11_H_ -+#define _802_11_H_ -+ -+#ifndef _TYPEDEFS_H_ -+#include -+#endif -+ -+#ifndef _NET_ETHERNET_H_ -+#include -+#endif -+ -+#include ++#ifndef _osl_h_ ++#define _osl_h_ + ++/* osl handle type forward declaration */ ++typedef struct os_handle osl_t; + -+/* enable structure packing */ -+#if defined(__GNUC__) -+#define PACKED __attribute__((packed)) ++#if defined(linux) ++#include ++#elif defined(NDIS) ++#include ++#elif defined(_CFE_) ++#include ++#elif defined(_HNDRTE_) ++#include ++#elif defined(_MINOSL_) ++#include ++#elif PMON ++#include ++#elif defined(MACOSX) ++#include +#else -+#pragma pack(1) -+#define PACKED ++#error "Unsupported OSL requested" +#endif + -+#define DOT11_TU_TO_US 1024 /* 802.11 Time Unit is 1024 microseconds */ -+ -+/* Generic 802.11 frame constants */ -+#define DOT11_A3_HDR_LEN 24 -+#define DOT11_A4_HDR_LEN 30 -+#define DOT11_MAC_HDR_LEN DOT11_A3_HDR_LEN -+#define DOT11_FCS_LEN 4 -+#define DOT11_ICV_LEN 4 -+#define DOT11_ICV_AES_LEN 8 -+#define DOT11_QOS_LEN 2 -+ -+#define DOT11_KEY_INDEX_SHIFT 6 -+#define DOT11_IV_LEN 4 -+#define DOT11_IV_TKIP_LEN 8 -+#define DOT11_IV_AES_OCB_LEN 4 -+#define DOT11_IV_AES_CCM_LEN 8 -+ -+/* Includes MIC */ -+#define DOT11_MAX_MPDU_BODY_LEN 2304 -+/* A4 header + QoS + CCMP + PDU + ICV + FCS = 2352 */ -+#define DOT11_MAX_MPDU_LEN (DOT11_A4_HDR_LEN + \ -+ DOT11_QOS_LEN + \ -+ DOT11_IV_AES_CCM_LEN + \ -+ DOT11_MAX_MPDU_BODY_LEN + \ -+ DOT11_ICV_LEN + \ -+ DOT11_FCS_LEN) -+ -+#define DOT11_MAX_SSID_LEN 32 -+ -+/* dot11RTSThreshold */ -+#define DOT11_DEFAULT_RTS_LEN 2347 -+#define DOT11_MAX_RTS_LEN 2347 -+ -+/* dot11FragmentationThreshold */ -+#define DOT11_MIN_FRAG_LEN 256 -+#define DOT11_MAX_FRAG_LEN 2346 /* Max frag is also limited by aMPDUMaxLength of the attached PHY */ -+#define DOT11_DEFAULT_FRAG_LEN 2346 -+ -+/* dot11BeaconPeriod */ -+#define DOT11_MIN_BEACON_PERIOD 1 -+#define DOT11_MAX_BEACON_PERIOD 0xFFFF -+ -+/* dot11DTIMPeriod */ -+#define DOT11_MIN_DTIM_PERIOD 1 -+#define DOT11_MAX_DTIM_PERIOD 0xFF -+ -+/* 802.2 LLC/SNAP header used by 802.11 per 802.1H */ -+#define DOT11_LLC_SNAP_HDR_LEN 8 -+#define DOT11_OUI_LEN 3 -+struct dot11_llc_snap_header { -+ uint8 dsap; /* always 0xAA */ -+ uint8 ssap; /* always 0xAA */ -+ uint8 ctl; /* always 0x03 */ -+ uint8 oui[DOT11_OUI_LEN]; /* RFC1042: 0x00 0x00 0x00 -+ Bridge-Tunnel: 0x00 0x00 0xF8 */ -+ uint16 type; /* ethertype */ -+} PACKED; -+ -+/* RFC1042 header used by 802.11 per 802.1H */ -+#define RFC1042_HDR_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN) -+ -+/* Generic 802.11 MAC header */ -+/* -+ * N.B.: This struct reflects the full 4 address 802.11 MAC header. -+ * The fields are defined such that the shorter 1, 2, and 3 -+ * address headers just use the first k fields. -+ */ -+struct dot11_header { -+ uint16 fc; /* frame control */ -+ uint16 durid; /* duration/ID */ -+ struct ether_addr a1; /* address 1 */ -+ struct ether_addr a2; /* address 2 */ -+ struct ether_addr a3; /* address 3 */ -+ uint16 seq; /* sequence control */ -+ struct ether_addr a4; /* address 4 */ -+} PACKED; -+ -+/* Control frames */ -+ -+struct dot11_rts_frame { -+ uint16 fc; /* frame control */ -+ uint16 durid; /* duration/ID */ -+ struct ether_addr ra; /* receiver address */ -+ struct ether_addr ta; /* transmitter address */ -+} PACKED; -+#define DOT11_RTS_LEN 16 -+ -+struct dot11_cts_frame { -+ uint16 fc; /* frame control */ -+ uint16 durid; /* duration/ID */ -+ struct ether_addr ra; /* receiver address */ -+} PACKED; -+#define DOT11_CTS_LEN 10 -+ -+struct dot11_ack_frame { -+ uint16 fc; /* frame control */ -+ uint16 durid; /* duration/ID */ -+ struct ether_addr ra; /* receiver address */ -+} PACKED; -+#define DOT11_ACK_LEN 10 -+ -+struct dot11_ps_poll_frame { -+ uint16 fc; /* frame control */ -+ uint16 durid; /* AID */ -+ struct ether_addr bssid; /* receiver address, STA in AP */ -+ struct ether_addr ta; /* transmitter address */ -+} PACKED; -+#define DOT11_PS_POLL_LEN 16 -+ -+struct dot11_cf_end_frame { -+ uint16 fc; /* frame control */ -+ uint16 durid; /* duration/ID */ -+ struct ether_addr ra; /* receiver address */ -+ struct ether_addr bssid; /* transmitter address, STA in AP */ -+} PACKED; -+#define DOT11_CS_END_LEN 16 -+ -+/* Management frame header */ -+struct dot11_management_header { -+ uint16 fc; /* frame control */ -+ uint16 durid; /* duration/ID */ -+ struct ether_addr da; /* receiver address */ -+ struct ether_addr sa; /* transmitter address */ -+ struct ether_addr bssid; /* BSS ID */ -+ uint16 seq; /* sequence control */ -+} PACKED; -+#define DOT11_MGMT_HDR_LEN 24 -+ -+/* Management frame payloads */ -+ -+struct dot11_bcn_prb { -+ uint32 timestamp[2]; -+ uint16 beacon_interval; -+ uint16 capability; -+} PACKED; -+#define DOT11_BCN_PRB_LEN 12 -+ -+struct dot11_auth { -+ uint16 alg; /* algorithm */ -+ uint16 seq; /* sequence control */ -+ uint16 status; /* status code */ -+} PACKED; -+#define DOT11_AUTH_FIXED_LEN 6 /* length of auth frame without challenge info elt */ -+ -+struct dot11_assoc_req { -+ uint16 capability; /* capability information */ -+ uint16 listen; /* listen interval */ -+} PACKED; -+#define DOT11_ASSOC_REQ_FIXED_LEN 4 /* length of assoc frame without info elts */ -+ -+struct dot11_reassoc_req { -+ uint16 capability; /* capability information */ -+ uint16 listen; /* listen interval */ -+ struct ether_addr ap; /* Current AP address */ -+} PACKED; -+#define DOT11_REASSOC_REQ_FIXED_LEN 10 /* length of assoc frame without info elts */ -+ -+struct dot11_assoc_resp { -+ uint16 capability; /* capability information */ -+ uint16 status; /* status code */ -+ uint16 aid; /* association ID */ -+} PACKED; -+ -+struct dot11_action_measure { -+ uint8 category; -+ uint8 action; -+ uint8 token; -+ uint8 data[1]; -+} PACKED; -+#define DOT11_ACTION_MEASURE_LEN 3 -+ -+struct dot11_action_switch_channel { -+ uint8 category; -+ uint8 action; -+ uint8 data[5]; /* for switch IE */ -+} PACKED; -+ -+/************** -+ 802.11h related definitions. -+**************/ -+typedef struct { -+ uint8 id; -+ uint8 len; -+ uint8 power; -+} dot11_power_cnst_t; -+ -+typedef struct { -+ uint8 min; -+ uint8 max; -+} dot11_power_cap_t; -+ -+typedef struct { -+ uint8 id; -+ uint8 len; -+ uint8 tx_pwr; -+ uint8 margin; -+} dot11_tpc_rep_t; -+#define DOT11_MNG_IE_TPC_REPORT_LEN 2 /* length of IE data, not including 2 byte header */ -+ -+typedef struct { -+ uint8 id; -+ uint8 len; -+ uint8 first_channel; -+ uint8 num_channels; -+} dot11_supp_channels_t; -+ -+/* csa mode type */ -+#define DOT11_CSA_MODE_ADVISORY 0 -+#define DOT11_CSA_MODE_NO_TX 1 -+struct dot11_channel_switch { -+ uint8 id; -+ uint8 len; -+ uint8 mode; -+ uint8 channel; -+ uint8 count; -+} PACKED; -+typedef struct dot11_channel_switch dot11_channel_switch_t; -+ -+/* length of IE data, not including 2 byte header */ -+#define DOT11_SWITCH_IE_LEN 3 -+ -+/* 802.11h Measurement Request/Report IEs */ -+/* Measurement Type field */ -+#define DOT11_MEASURE_TYPE_BASIC 0 -+#define DOT11_MEASURE_TYPE_CCA 1 -+#define DOT11_MEASURE_TYPE_RPI 2 -+ -+/* Measurement Mode field */ -+ -+/* Measurement Request Modes */ -+#define DOT11_MEASURE_MODE_ENABLE (1<<1) -+#define DOT11_MEASURE_MODE_REQUEST (1<<2) -+#define DOT11_MEASURE_MODE_REPORT (1<<3) -+/* Measurement Report Modes */ -+#define DOT11_MEASURE_MODE_LATE (1<<0) -+#define DOT11_MEASURE_MODE_INCAPABLE (1<<1) -+#define DOT11_MEASURE_MODE_REFUSED (1<<2) -+/* Basic Measurement Map bits */ -+#define DOT11_MEASURE_BASIC_MAP_BSS ((uint8)(1<<0)) -+#define DOT11_MEASURE_BASIC_MAP_OFDM ((uint8)(1<<1)) -+#define DOT11_MEASURE_BASIC_MAP_UKNOWN ((uint8)(1<<2)) -+#define DOT11_MEASURE_BASIC_MAP_RADAR ((uint8)(1<<3)) -+#define DOT11_MEASURE_BASIC_MAP_UNMEAS ((uint8)(1<<4)) -+ -+typedef struct { -+ uint8 id; -+ uint8 len; -+ uint8 token; -+ uint8 mode; -+ uint8 type; -+ uint8 channel; -+ uint8 start_time[8]; -+ uint16 duration; -+} dot11_meas_req_t; -+#define DOT11_MNG_IE_MREQ_LEN 14 -+/* length of Measure Request IE data not including variable len */ -+#define DOT11_MNG_IE_MREQ_FIXED_LEN 3 -+ -+struct dot11_meas_rep { -+ uint8 id; -+ uint8 len; -+ uint8 token; -+ uint8 mode; -+ uint8 type; -+ union -+ { -+ struct { -+ uint8 channel; -+ uint8 start_time[8]; -+ uint16 duration; -+ uint8 map; -+ } PACKED basic; -+ uint8 data[1]; -+ } PACKED rep; -+} PACKED; -+typedef struct dot11_meas_rep dot11_meas_rep_t; -+ -+/* length of Measure Report IE data not including variable len */ -+#define DOT11_MNG_IE_MREP_FIXED_LEN 3 -+ -+struct dot11_meas_rep_basic { -+ uint8 channel; -+ uint8 start_time[8]; -+ uint16 duration; -+ uint8 map; -+} PACKED; -+typedef struct dot11_meas_rep_basic dot11_meas_rep_basic_t; -+#define DOT11_MEASURE_BASIC_REP_LEN 12 -+ -+struct dot11_quiet { -+ uint8 id; -+ uint8 len; -+ uint8 count; /* TBTTs until beacon interval in quiet starts */ -+ uint8 period; /* Beacon intervals between periodic quiet periods ? */ -+ uint16 duration;/* Length of quiet period, in TU's */ -+ uint16 offset; /* TU's offset from TBTT in Count field */ -+} PACKED; -+typedef struct dot11_quiet dot11_quiet_t; -+ -+typedef struct { -+ uint8 channel; -+ uint8 map; -+} chan_map_tuple_t; -+ -+typedef struct { -+ uint8 id; -+ uint8 len; -+ uint8 eaddr[ETHER_ADDR_LEN]; -+ uint8 interval; -+ chan_map_tuple_t map[1]; -+} dot11_ibss_dfs_t; -+ -+/* WME Elements */ -+#define WME_OUI "\x00\x50\xf2" -+#define WME_VER 1 -+#define WME_TYPE 2 -+#define WME_SUBTYPE_IE 0 /* Information Element */ -+#define WME_SUBTYPE_PARAM_IE 1 /* Parameter Element */ -+#define WME_SUBTYPE_TSPEC 2 /* Traffic Specification */ -+ -+/* WME Access Category Indices (ACIs) */ -+#define AC_BE 0 /* Best Effort */ -+#define AC_BK 1 /* Background */ -+#define AC_VI 2 /* Video */ -+#define AC_VO 3 /* Voice */ -+#define AC_MAX 4 -+ -+/* WME Information Element (IE) */ -+struct wme_ie { -+ uint8 oui[3]; -+ uint8 type; -+ uint8 subtype; -+ uint8 version; -+ uint8 acinfo; -+} PACKED; -+typedef struct wme_ie wme_ie_t; -+#define WME_IE_LEN 7 -+ -+struct wme_acparam { -+ uint8 ACI; -+ uint8 ECW; -+ uint16 TXOP; /* stored in network order (ls octet first) */ -+} PACKED; -+typedef struct wme_acparam wme_acparam_t; -+ -+/* WME Parameter Element (PE) */ -+struct wme_params { -+ uint8 oui[3]; -+ uint8 type; -+ uint8 subtype; -+ uint8 version; -+ uint8 acinfo; -+ uint8 rsvd; -+ wme_acparam_t acparam[4]; -+} PACKED; -+typedef struct wme_params wme_params_t; -+#define WME_PARAMS_IE_LEN 24 -+ -+/* acinfo */ -+#define WME_COUNT_MASK 0x0f -+/* ACI */ -+#define WME_AIFS_MASK 0x0f -+#define WME_ACM_MASK 0x10 -+#define WME_ACI_MASK 0x60 -+#define WME_ACI_SHIFT 5 -+/* ECW */ -+#define WME_CWMIN_MASK 0x0f -+#define WME_CWMAX_MASK 0xf0 -+#define WME_CWMAX_SHIFT 4 -+ -+#define WME_TXOP_UNITS 32 -+ -+/* AP: default params to be announced in the Beacon Frames/Probe Responses Table 12 WME Draft*/ -+/* AP: default params to be Used in the AP Side Table 14 WME Draft January 2004 802.11-03-504r5 */ -+#define WME_AC_BK_ACI_STA 0x27 -+#define WME_AC_BK_ECW_STA 0xA4 -+#define WME_AC_BK_TXOP_STA 0x0000 -+#define WME_AC_BE_ACI_STA 0x03 -+#define WME_AC_BE_ECW_STA 0xA4 -+#define WME_AC_BE_TXOP_STA 0x0000 -+#define WME_AC_VI_ACI_STA 0x42 -+#define WME_AC_VI_ECW_STA 0x43 -+#define WME_AC_VI_TXOP_STA 0x005e -+#define WME_AC_VO_ACI_STA 0x62 -+#define WME_AC_VO_ECW_STA 0x32 -+#define WME_AC_VO_TXOP_STA 0x002f -+ -+#define WME_AC_BK_ACI_AP 0x27 -+#define WME_AC_BK_ECW_AP 0xA4 -+#define WME_AC_BK_TXOP_AP 0x0000 -+#define WME_AC_BE_ACI_AP 0x03 -+#define WME_AC_BE_ECW_AP 0x64 -+#define WME_AC_BE_TXOP_AP 0x0000 -+#define WME_AC_VI_ACI_AP 0x41 -+#define WME_AC_VI_ECW_AP 0x43 -+#define WME_AC_VI_TXOP_AP 0x005e -+#define WME_AC_VO_ACI_AP 0x61 -+#define WME_AC_VO_ECW_AP 0x32 -+#define WME_AC_VO_TXOP_AP 0x002f -+ -+/* WME Traffic Specification (TSPEC) element */ -+#define WME_SUBTYPE_TSPEC 2 -+#define WME_TSPEC_HDR_LEN 2 -+#define WME_TSPEC_BODY_OFF 2 -+struct wme_tspec { -+ uint8 oui[DOT11_OUI_LEN]; /* WME_OUI */ -+ uint8 type; /* WME_TYPE */ -+ uint8 subtype; /* WME_SUBTYPE_TSPEC */ -+ uint8 version; /* WME_VERSION */ -+ uint16 ts_info; /* TS Info */ -+ uint16 nom_msdu_size; /* (Nominal or fixed) MSDU Size (bytes) */ -+ uint16 max_msdu_size; /* Maximum MSDU Size (bytes) */ -+ uint32 min_service_interval; /* Minimum Service Interval (us) */ -+ uint32 max_service_interval; /* Maximum Service Interval (us) */ -+ uint32 inactivity_interval; /* Inactivity Interval (us) */ -+ uint32 service_start; /* Service Start Time (us) */ -+ uint32 min_rate; /* Minimum Data Rate (bps) */ -+ uint32 mean_rate; /* Mean Data Rate (bps) */ -+ uint32 max_burst_size; /* Maximum Burst Size (bytes) */ -+ uint32 min_phy_rate; /* Minimum PHY Rate (bps) */ -+ uint32 peak_rate; /* Peak Data Rate (bps) */ -+ uint32 delay_bound; /* Delay Bound (us) */ -+ uint16 surplus_bandwidth; /* Surplus Bandwidth Allowance Factor */ -+ uint16 medium_time; /* Medium Time (32 us/s periods) */ -+} PACKED; -+typedef struct wme_tspec wme_tspec_t; -+#define WME_TSPEC_LEN 56 /* not including 2-byte header */ -+ -+/* ts_info */ -+/* 802.1D priority is duplicated - bits 13-11 AND bits 3-1 */ -+#define TS_INFO_PRIO_SHIFT_HI 11 -+#define TS_INFO_PRIO_MASK_HI (0x7 << TS_INFO_PRIO_SHIFT_HI) -+#define TS_INFO_PRIO_SHIFT_LO 1 -+#define TS_INFO_PRIO_MASK_LO (0x7 << TS_INFO_PRIO_SHIFT_LO) -+#define TS_INFO_CONTENTION_SHIFT 7 -+#define TS_INFO_CONTENTION_MASK (0x1 << TS_INFO_CONTENTION_SHIFT) -+#define TS_INFO_DIRECTION_SHIFT 5 -+#define TS_INFO_DIRECTION_MASK (0x3 << TS_INFO_DIRECTION_SHIFT) -+#define TS_INFO_UPLINK (0 << TS_INFO_DIRECTION_SHIFT) -+#define TS_INFO_DOWNLINK (1 << TS_INFO_DIRECTION_SHIFT) -+#define TS_INFO_BIDIRECTIONAL (3 << TS_INFO_DIRECTION_SHIFT) -+ -+/* nom_msdu_size */ -+#define FIXED_MSDU_SIZE 0x8000 /* MSDU size is fixed */ -+#define MSDU_SIZE_MASK 0x7fff /* (Nominal or fixed) MSDU size */ -+ -+/* surplus_bandwidth */ -+/* Represented as 3 bits of integer, binary point, 13 bits fraction */ -+#define INTEGER_SHIFT 13 -+#define FRACTION_MASK 0x1FFF -+ -+/* Management Notification Frame */ -+struct dot11_management_notification { -+ uint8 category; /* DOT11_ACTION_NOTIFICATION */ -+ uint8 action; -+ uint8 token; -+ uint8 status; -+ uint8 data[1]; /* Elements */ -+} PACKED; -+#define DOT11_MGMT_NOTIFICATION_LEN 4 /* Fixed length */ -+ -+/* WME Action Codes */ -+#define WME_SETUP_REQUEST 0 -+#define WME_SETUP_RESPONSE 1 -+#define WME_TEARDOWN 2 -+ -+/* WME Setup Response Status Codes */ -+#define WME_ADMISSION_ACCEPTED 0 -+#define WME_INVALID_PARAMETERS 1 -+#define WME_ADMISSION_REFUSED 3 -+ -+/* Macro to take a pointer to a beacon or probe response -+ * header and return the char* pointer to the SSID info element -+ */ -+#define BCN_PRB_SSID(hdr) ((char*)(hdr) + DOT11_MGMT_HDR_LEN + DOT11_BCN_PRB_LEN) -+ -+/* Authentication frame payload constants */ -+#define DOT11_OPEN_SYSTEM 0 -+#define DOT11_SHARED_KEY 1 -+#define DOT11_CHALLENGE_LEN 128 -+ -+/* Frame control macros */ -+#define FC_PVER_MASK 0x3 -+#define FC_PVER_SHIFT 0 -+#define FC_TYPE_MASK 0xC -+#define FC_TYPE_SHIFT 2 -+#define FC_SUBTYPE_MASK 0xF0 -+#define FC_SUBTYPE_SHIFT 4 -+#define FC_TODS 0x100 -+#define FC_TODS_SHIFT 8 -+#define FC_FROMDS 0x200 -+#define FC_FROMDS_SHIFT 9 -+#define FC_MOREFRAG 0x400 -+#define FC_MOREFRAG_SHIFT 10 -+#define FC_RETRY 0x800 -+#define FC_RETRY_SHIFT 11 -+#define FC_PM 0x1000 -+#define FC_PM_SHIFT 12 -+#define FC_MOREDATA 0x2000 -+#define FC_MOREDATA_SHIFT 13 -+#define FC_WEP 0x4000 -+#define FC_WEP_SHIFT 14 -+#define FC_ORDER 0x8000 -+#define FC_ORDER_SHIFT 15 -+ -+/* sequence control macros */ -+#define SEQNUM_SHIFT 4 -+#define FRAGNUM_MASK 0xF -+ -+/* Frame Control type/subtype defs */ -+ -+/* FC Types */ -+#define FC_TYPE_MNG 0 -+#define FC_TYPE_CTL 1 -+#define FC_TYPE_DATA 2 -+ -+/* Management Subtypes */ -+#define FC_SUBTYPE_ASSOC_REQ 0 -+#define FC_SUBTYPE_ASSOC_RESP 1 -+#define FC_SUBTYPE_REASSOC_REQ 2 -+#define FC_SUBTYPE_REASSOC_RESP 3 -+#define FC_SUBTYPE_PROBE_REQ 4 -+#define FC_SUBTYPE_PROBE_RESP 5 -+#define FC_SUBTYPE_BEACON 8 -+#define FC_SUBTYPE_ATIM 9 -+#define FC_SUBTYPE_DISASSOC 10 -+#define FC_SUBTYPE_AUTH 11 -+#define FC_SUBTYPE_DEAUTH 12 -+#define FC_SUBTYPE_ACTION 13 -+ -+/* Control Subtypes */ -+#define FC_SUBTYPE_PS_POLL 10 -+#define FC_SUBTYPE_RTS 11 -+#define FC_SUBTYPE_CTS 12 -+#define FC_SUBTYPE_ACK 13 -+#define FC_SUBTYPE_CF_END 14 -+#define FC_SUBTYPE_CF_END_ACK 15 -+ -+/* Data Subtypes */ -+#define FC_SUBTYPE_DATA 0 -+#define FC_SUBTYPE_DATA_CF_ACK 1 -+#define FC_SUBTYPE_DATA_CF_POLL 2 -+#define FC_SUBTYPE_DATA_CF_ACK_POLL 3 -+#define FC_SUBTYPE_NULL 4 -+#define FC_SUBTYPE_CF_ACK 5 -+#define FC_SUBTYPE_CF_POLL 6 -+#define FC_SUBTYPE_CF_ACK_POLL 7 -+#define FC_SUBTYPE_QOS_DATA 8 -+#define FC_SUBTYPE_QOS_NULL 12 -+ -+/* type-subtype combos */ -+#define FC_KIND_MASK (FC_TYPE_MASK | FC_SUBTYPE_MASK) -+ -+#define FC_KIND(t, s) (((t) << FC_TYPE_SHIFT) | ((s) << FC_SUBTYPE_SHIFT)) -+ -+#define FC_ASSOC_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_REQ) -+#define FC_ASSOC_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_RESP) -+#define FC_REASSOC_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_REQ) -+#define FC_REASSOC_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_RESP) -+#define FC_PROBE_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_REQ) -+#define FC_PROBE_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_RESP) -+#define FC_BEACON FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_BEACON) -+#define FC_DISASSOC FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DISASSOC) -+#define FC_AUTH FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_AUTH) -+#define FC_DEAUTH FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DEAUTH) -+#define FC_ACTION FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ACTION) -+ -+#define FC_PS_POLL FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_PS_POLL) -+#define FC_RTS FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_RTS) -+#define FC_CTS FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CTS) -+#define FC_ACK FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_ACK) -+#define FC_CF_END FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END) -+#define FC_CF_END_ACK FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END_ACK) -+ -+#define FC_DATA FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA) -+#define FC_NULL_DATA FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_NULL) -+#define FC_DATA_CF_ACK FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA_CF_ACK) -+#define FC_QOS_DATA FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_QOS_DATA) -+#define FC_QOS_NULL FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_QOS_NULL) -+ -+/* QoS Control Field */ -+ -+/* 802.1D Tag */ -+#define QOS_PRIO_SHIFT 0 -+#define QOS_PRIO_MASK 0x0007 -+#define QOS_PRIO(qos) (((qos) & QOS_PRIO_MASK) >> QOS_PRIO_SHIFT) -+ -+#define QOS_TID_SHIFT 0 -+#define QOS_TID_MASK 0x000f -+#define QOS_TID(qos) (((qos) & QOS_TID_MASK) >> QOS_TID_SHIFT) -+ -+/* Ack Policy (0 means Acknowledge) */ -+#define QOS_ACK_SHIFT 5 -+#define QOS_ACK_MASK 0x0060 -+#define QOS_ACK(qos) (((qos) & QOS_ACK_MASK) >> QOS_ACK_SHIFT) -+ -+/* Management Frames */ -+ -+/* Management Frame Constants */ -+ -+/* Fixed fields */ -+#define DOT11_MNG_AUTH_ALGO_LEN 2 -+#define DOT11_MNG_AUTH_SEQ_LEN 2 -+#define DOT11_MNG_BEACON_INT_LEN 2 -+#define DOT11_MNG_CAP_LEN 2 -+#define DOT11_MNG_AP_ADDR_LEN 6 -+#define DOT11_MNG_LISTEN_INT_LEN 2 -+#define DOT11_MNG_REASON_LEN 2 -+#define DOT11_MNG_AID_LEN 2 -+#define DOT11_MNG_STATUS_LEN 2 -+#define DOT11_MNG_TIMESTAMP_LEN 8 -+ -+/* DUR/ID field in assoc resp is 0xc000 | AID */ -+#define DOT11_AID_MASK 0x3fff -+ -+/* Reason Codes */ -+#define DOT11_RC_RESERVED 0 -+#define DOT11_RC_UNSPECIFIED 1 /* Unspecified reason */ -+#define DOT11_RC_AUTH_INVAL 2 /* Previous authentication no longer valid */ -+#define DOT11_RC_DEAUTH_LEAVING 3 /* Deauthenticated because sending station is -+ leaving (or has left) IBSS or ESS */ -+#define DOT11_RC_INACTIVITY 4 /* Disassociated due to inactivity */ -+#define DOT11_RC_BUSY 5 /* Disassociated because AP is unable to handle -+ all currently associated stations */ -+#define DOT11_RC_INVAL_CLASS_2 6 /* Class 2 frame received from -+ nonauthenticated station */ -+#define DOT11_RC_INVAL_CLASS_3 7 /* Class 3 frame received from -+ nonassociated station */ -+#define DOT11_RC_DISASSOC_LEAVING 8 /* Disassociated because sending station is -+ leaving (or has left) BSS */ -+#define DOT11_RC_NOT_AUTH 9 /* Station requesting (re)association is -+ not authenticated with responding station */ -+#define DOT11_RC_MAX 23 /* Reason codes > 23 are reserved */ -+ -+/* Status Codes */ -+#define DOT11_STATUS_SUCCESS 0 /* Successful */ -+#define DOT11_STATUS_FAILURE 1 /* Unspecified failure */ -+#define DOT11_STATUS_CAP_MISMATCH 10 /* Cannot support all requested capabilities -+ in the Capability Information field */ -+#define DOT11_STATUS_REASSOC_FAIL 11 /* Reassociation denied due to inability to -+ confirm that association exists */ -+#define DOT11_STATUS_ASSOC_FAIL 12 /* Association denied due to reason outside -+ the scope of this standard */ -+#define DOT11_STATUS_AUTH_MISMATCH 13 /* Responding station does not support the -+ specified authentication algorithm */ -+#define DOT11_STATUS_AUTH_SEQ 14 /* Received an Authentication frame with -+ authentication transaction sequence number -+ out of expected sequence */ -+#define DOT11_STATUS_AUTH_CHALLENGE_FAIL 15 /* Authentication rejected because of challenge failure */ -+#define DOT11_STATUS_AUTH_TIMEOUT 16 /* Authentication rejected due to timeout waiting -+ for next frame in sequence */ -+#define DOT11_STATUS_ASSOC_BUSY_FAIL 17 /* Association denied because AP is unable to -+ handle additional associated stations */ -+#define DOT11_STATUS_ASSOC_RATE_MISMATCH 18 /* Association denied due to requesting station -+ not supporting all of the data rates in the -+ BSSBasicRateSet parameter */ -+#define DOT11_STATUS_ASSOC_SHORT_REQUIRED 19 /* Association denied due to requesting station -+ not supporting the Short Preamble option */ -+#define DOT11_STATUS_ASSOC_PBCC_REQUIRED 20 /* Association denied due to requesting station -+ not supporting the PBCC Modulation option */ -+#define DOT11_STATUS_ASSOC_AGILITY_REQUIRED 21 /* Association denied due to requesting station -+ not supporting the Channel Agility option */ -+#define DOT11_STATUS_ASSOC_SPECTRUM_REQUIRED 22 /* Association denied because Spectrum Management -+ capability is required. */ -+#define DOT11_STATUS_ASSOC_BAD_POWER_CAP 23 /* Association denied because the info in the -+ Power Cap element is unacceptable. */ -+#define DOT11_STATUS_ASSOC_BAD_SUP_CHANNELS 24 /* Association denied because the info in the -+ Supported Channel element is unacceptable */ -+#define DOT11_STATUS_ASSOC_SHORTSLOT_REQUIRED 25 /* Association denied due to requesting station -+ not supporting the Short Slot Time option */ -+#define DOT11_STATUS_ASSOC_ERPBCC_REQUIRED 26 /* Association denied due to requesting station -+ not supporting the ER-PBCC Modulation option */ -+#define DOT11_STATUS_ASSOC_DSSOFDM_REQUIRED 27 /* Association denied due to requesting station -+ not supporting the DSS-OFDM option */ -+ -+/* Info Elts, length of INFORMATION portion of Info Elts */ -+#define DOT11_MNG_DS_PARAM_LEN 1 -+#define DOT11_MNG_IBSS_PARAM_LEN 2 -+ -+/* TIM Info element has 3 bytes fixed info in INFORMATION field, -+ * followed by 1 to 251 bytes of Partial Virtual Bitmap */ -+#define DOT11_MNG_TIM_FIXED_LEN 3 -+#define DOT11_MNG_TIM_DTIM_COUNT 0 -+#define DOT11_MNG_TIM_DTIM_PERIOD 1 -+#define DOT11_MNG_TIM_BITMAP_CTL 2 -+#define DOT11_MNG_TIM_PVB 3 -+ -+/* TLV defines */ -+#define TLV_TAG_OFF 0 -+#define TLV_LEN_OFF 1 -+#define TLV_HDR_LEN 2 -+#define TLV_BODY_OFF 2 -+ -+/* Management Frame Information Element IDs */ -+#define DOT11_MNG_SSID_ID 0 -+#define DOT11_MNG_RATES_ID 1 -+#define DOT11_MNG_FH_PARMS_ID 2 -+#define DOT11_MNG_DS_PARMS_ID 3 -+#define DOT11_MNG_CF_PARMS_ID 4 -+#define DOT11_MNG_TIM_ID 5 -+#define DOT11_MNG_IBSS_PARMS_ID 6 -+#define DOT11_MNG_COUNTRY_ID 7 -+#define DOT11_MNG_HOPPING_PARMS_ID 8 -+#define DOT11_MNG_HOPPING_TABLE_ID 9 -+#define DOT11_MNG_REQUEST_ID 10 -+#define DOT11_MNG_CHALLENGE_ID 16 -+#define DOT11_MNG_PWR_CONSTRAINT_ID 32 /* 11H PowerConstraint */ -+#define DOT11_MNG_PWR_CAP_ID 33 /* 11H PowerCapability */ -+#define DOT11_MNG_TPC_REQUEST_ID 34 /* 11H TPC Request */ -+#define DOT11_MNG_TPC_REPORT_ID 35 /* 11H TPC Report */ -+#define DOT11_MNG_SUPP_CHANNELS_ID 36 /* 11H Supported Channels */ -+#define DOT11_MNG_CHANNEL_SWITCH_ID 37 /* 11H ChannelSwitch Announcement*/ -+#define DOT11_MNG_MEASURE_REQUEST_ID 38 /* 11H MeasurementRequest */ -+#define DOT11_MNG_MEASURE_REPORT_ID 39 /* 11H MeasurementReport */ -+#define DOT11_MNG_QUIET_ID 40 /* 11H Quiet */ -+#define DOT11_MNG_IBSS_DFS_ID 41 /* 11H IBSS_DFS */ -+#define DOT11_MNG_ERP_ID 42 -+#define DOT11_MNG_NONERP_ID 47 -+#ifdef BCMWPA2 -+#define DOT11_MNG_RSN_ID 48 -+#endif /* BCMWPA2 */ -+#define DOT11_MNG_EXT_RATES_ID 50 -+#define DOT11_MNG_WPA_ID 221 -+#define DOT11_MNG_PROPR_ID 221 -+ -+/* ERP info element bit values */ -+#define DOT11_MNG_ERP_LEN 1 /* ERP is currently 1 byte long */ -+#define DOT11_MNG_NONERP_PRESENT 0x01 /* NonERP (802.11b) STAs are present in the BSS */ -+#define DOT11_MNG_USE_PROTECTION 0x02 /* Use protection mechanisms for ERP-OFDM frames */ -+#define DOT11_MNG_BARKER_PREAMBLE 0x04 /* Short Preambles: 0 == allowed, 1 == not allowed */ -+ -+/* Capability Information Field */ -+#define DOT11_CAP_ESS 0x0001 -+#define DOT11_CAP_IBSS 0x0002 -+#define DOT11_CAP_POLLABLE 0x0004 -+#define DOT11_CAP_POLL_RQ 0x0008 -+#define DOT11_CAP_PRIVACY 0x0010 -+#define DOT11_CAP_SHORT 0x0020 -+#define DOT11_CAP_PBCC 0x0040 -+#define DOT11_CAP_AGILITY 0x0080 -+#define DOT11_CAP_SPECTRUM 0x0100 -+#define DOT11_CAP_SHORTSLOT 0x0400 -+#define DOT11_CAP_CCK_OFDM 0x2000 -+ -+/* Action Frame Constants */ -+#define DOT11_ACTION_CAT_ERR_MASK 0x80 -+#define DOT11_ACTION_CAT_SPECT_MNG 0x00 -+#define DOT11_ACTION_NOTIFICATION 0x11 /* 17 */ -+ -+#define DOT11_ACTION_ID_M_REQ 0 -+#define DOT11_ACTION_ID_M_REP 1 -+#define DOT11_ACTION_ID_TPC_REQ 2 -+#define DOT11_ACTION_ID_TPC_REP 3 -+#define DOT11_ACTION_ID_CHANNEL_SWITCH 4 -+ -+/* MLME Enumerations */ -+#define DOT11_BSSTYPE_INFRASTRUCTURE 0 -+#define DOT11_BSSTYPE_INDEPENDENT 1 -+#define DOT11_BSSTYPE_ANY 2 -+#define DOT11_SCANTYPE_ACTIVE 0 -+#define DOT11_SCANTYPE_PASSIVE 1 -+ -+/* 802.11 A PHY constants */ -+#define APHY_SLOT_TIME 9 -+#define APHY_SIFS_TIME 16 -+#define APHY_DIFS_TIME (APHY_SIFS_TIME + (2 * APHY_SLOT_TIME)) -+#define APHY_PREAMBLE_TIME 16 -+#define APHY_SIGNAL_TIME 4 -+#define APHY_SYMBOL_TIME 4 -+#define APHY_SERVICE_NBITS 16 -+#define APHY_TAIL_NBITS 6 -+#define APHY_CWMIN 15 -+ -+/* 802.11 B PHY constants */ -+#define BPHY_SLOT_TIME 20 -+#define BPHY_SIFS_TIME 10 -+#define BPHY_DIFS_TIME 50 -+#define BPHY_PLCP_TIME 192 -+#define BPHY_PLCP_SHORT_TIME 96 -+#define BPHY_CWMIN 31 -+ -+/* 802.11 G constants */ -+#define DOT11_OFDM_SIGNAL_EXTENSION 6 -+ -+#define PHY_CWMAX 1023 -+ -+#define DOT11_MAXNUMFRAGS 16 /* max # fragments per MSDU */ -+ -+/* dot11Counters Table - 802.11 spec., Annex D */ -+typedef struct d11cnt { -+ uint32 txfrag; /* dot11TransmittedFragmentCount */ -+ uint32 txmulti; /* dot11MulticastTransmittedFrameCount */ -+ uint32 txfail; /* dot11FailedCount */ -+ uint32 txretry; /* dot11RetryCount */ -+ uint32 txretrie; /* dot11MultipleRetryCount */ -+ uint32 rxdup; /* dot11FrameduplicateCount */ -+ uint32 txrts; /* dot11RTSSuccessCount */ -+ uint32 txnocts; /* dot11RTSFailureCount */ -+ uint32 txnoack; /* dot11ACKFailureCount */ -+ uint32 rxfrag; /* dot11ReceivedFragmentCount */ -+ uint32 rxmulti; /* dot11MulticastReceivedFrameCount */ -+ uint32 rxcrc; /* dot11FCSErrorCount */ -+ uint32 txfrmsnt; /* dot11TransmittedFrameCount */ -+ uint32 rxundec; /* dot11WEPUndecryptableCount */ -+} d11cnt_t; -+ -+/* BRCM OUI */ -+#define BRCM_OUI "\x00\x10\x18" -+ -+/* BRCM info element */ -+struct brcm_ie { -+ uchar id; /* 221, DOT11_MNG_PROPR_ID */ -+ uchar len; -+ uchar oui[3]; -+ uchar ver; -+ uchar assoc; /* # of assoc STAs */ -+ uchar flags; /* misc flags */ -+} PACKED; -+#define BRCM_IE_LEN 8 -+typedef struct brcm_ie brcm_ie_t; -+#define BRCM_IE_VER 2 -+#define BRCM_IE_LEGACY_AES_VER 1 -+ -+/* brcm_ie flags */ -+#define BRF_ABCAP 0x1 /* afterburner capable */ -+#define BRF_ABRQRD 0x2 /* afterburner requested */ -+#define BRF_LZWDS 0x4 /* lazy wds enabled */ -+#define BRF_ABCOUNTER_MASK 0xf0 /* afterburner wds "state" counter */ -+#define BRF_ABCOUNTER_SHIFT 4 -+ -+#define AB_WDS_TIMEOUT_MAX 15 /* afterburner wds Max count indicating not locally capable */ -+#define AB_WDS_TIMEOUT_MIN 1 /* afterburner wds, use zero count as indicating "downrev" */ -+ -+ -+/* OUI for BRCM proprietary IE */ -+#define BRCM_PROP_OUI "\x00\x90\x4C" -+ -+/* Vendor IE structure */ -+struct vndr_ie { -+ uchar id; -+ uchar len; -+ uchar oui [3]; -+ uchar data [1]; /* Variable size data */ -+}PACKED; -+typedef struct vndr_ie vndr_ie_t; -+ -+#define VNDR_IE_HDR_LEN 2 /* id + len field */ -+#define VNDR_IE_MIN_LEN 3 /* size of the oui field */ -+#define VNDR_IE_MAX_LEN 256 -+ -+/* WPA definitions */ -+#define WPA_VERSION 1 -+#define WPA_OUI "\x00\x50\xF2" -+ -+#ifdef BCMWPA2 -+#define WPA2_VERSION 1 -+#define WPA2_VERSION_LEN 2 -+#define WPA2_OUI "\x00\x0F\xAC" -+#endif /* BCMWPA2 */ -+ -+#define WPA_OUI_LEN 3 -+ -+/* RSN authenticated key managment suite */ -+#define RSN_AKM_NONE 0 /* None (IBSS) */ -+#define RSN_AKM_UNSPECIFIED 1 /* Over 802.1x */ -+#define RSN_AKM_PSK 2 /* Pre-shared Key */ -+ -+ -+/* Key related defines */ -+#define DOT11_MAX_DEFAULT_KEYS 4 /* number of default keys */ -+#define DOT11_MAX_KEY_SIZE 32 /* max size of any key */ -+#define DOT11_MAX_IV_SIZE 16 /* max size of any IV */ -+#define DOT11_EXT_IV_FLAG (1<<5) /* flag to indicate IV is > 4 bytes */ -+ -+#define WEP1_KEY_SIZE 5 /* max size of any WEP key */ -+#define WEP1_KEY_HEX_SIZE 10 /* size of WEP key in hex. */ -+#define WEP128_KEY_SIZE 13 /* max size of any WEP key */ -+#define WEP128_KEY_HEX_SIZE 26 /* size of WEP key in hex. */ -+#define TKIP_MIC_SIZE 8 /* size of TKIP MIC */ -+#define TKIP_EOM_SIZE 7 /* max size of TKIP EOM */ -+#define TKIP_EOM_FLAG 0x5a /* TKIP EOM flag byte */ -+#define TKIP_KEY_SIZE 32 /* size of any TKIP key */ -+#define TKIP_MIC_AUTH_TX 16 /* offset to Authenticator MIC TX key */ -+#define TKIP_MIC_AUTH_RX 24 /* offset to Authenticator MIC RX key */ -+#define TKIP_MIC_SUP_RX 16 /* offset to Supplicant MIC RX key */ -+#define TKIP_MIC_SUP_TX 24 /* offset to Supplicant MIC TX key */ -+#define AES_KEY_SIZE 16 /* size of AES key */ -+ -+#undef PACKED -+#if !defined(__GNUC__) -+#pragma pack() -+#endif ++/* handy */ ++#define SET_REG(r, mask, val) W_REG((r), ((R_REG(r) & ~(mask)) | (val))) ++#define MAXPRIO 7 /* 0-7 */ + -+#endif /* _802_11_H_ */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/proto/bcmeth.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/proto/bcmeth.h ---- linux-2.4.32/arch/mips/bcm947xx/include/proto/bcmeth.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/proto/bcmeth.h 2005-12-16 23:39:10.756825000 +0100 -@@ -0,0 +1,103 @@ ++#endif /* _osl_h_ */ +diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/pcicfg.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/pcicfg.h +--- linux-2.4.32/arch/mips/bcm947xx/include/pcicfg.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/pcicfg.h 2005-12-16 23:39:10.752824750 +0100 +@@ -0,0 +1,451 @@ +/* -+ * Broadcom Ethernettype protocol definitions ++ * pcicfg.h: PCI configuration constants and structures. + * + * Copyright 2005, Broadcom Corporation + * All Rights Reserved. @@ -6065,588 +3185,446 @@ diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/proto/bcmeth.h linux-2.4.32-br + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * ++ * $Id$ + */ + -+/* -+ * Broadcom Ethernet protocol defines -+ * -+ */ -+ -+#ifndef _BCMETH_H_ -+#define _BCMETH_H_ ++#ifndef _h_pci_ ++#define _h_pci_ + -+/* enable structure packing */ -+#if defined(__GNUC__) -+#define PACKED __attribute__((packed)) -+#else -+#pragma pack(1) -+#define PACKED ++/* The following inside ifndef's so we don't collide with NTDDK.H */ ++#ifndef PCI_MAX_BUS ++#define PCI_MAX_BUS 0x100 +#endif -+ -+/* ETHER_TYPE_BRCM is defined in ethernet.h */ -+ -+/* -+ * Following the 2byte BRCM ether_type is a 16bit BRCM subtype field -+ * in one of two formats: (only subtypes 32768-65535 are in use now) -+ * -+ * subtypes 0-32767: -+ * 8 bit subtype (0-127) -+ * 8 bit length in bytes (0-255) -+ * -+ * subtypes 32768-65535: -+ * 16 bit big-endian subtype -+ * 16 bit big-endian length in bytes (0-65535) -+ * -+ * length is the number of additional bytes beyond the 4 or 6 byte header -+ * -+ * Reserved values: -+ * 0 reserved -+ * 5-15 reserved for iLine protocol assignments -+ * 17-126 reserved, assignable -+ * 127 reserved -+ * 32768 reserved -+ * 32769-65534 reserved, assignable -+ * 65535 reserved -+ */ -+ -+/* -+ * While adding the subtypes and their specific processing code make sure -+ * bcmeth_bcm_hdr_t is the first data structure in the user specific data structure definition -+ */ -+ -+#define BCMILCP_SUBTYPE_RATE 1 -+#define BCMILCP_SUBTYPE_LINK 2 -+#define BCMILCP_SUBTYPE_CSA 3 -+#define BCMILCP_SUBTYPE_LARQ 4 -+#define BCMILCP_SUBTYPE_VENDOR 5 -+#define BCMILCP_SUBTYPE_FLH 17 -+ -+#define BCMILCP_SUBTYPE_VENDOR_LONG 32769 -+#define BCMILCP_SUBTYPE_CERT 32770 -+#define BCMILCP_SUBTYPE_SES 32771 -+ -+ -+#define BCMILCP_BCM_SUBTYPE_RESERVED 0 -+#define BCMILCP_BCM_SUBTYPE_EVENT 1 -+#define BCMILCP_BCM_SUBTYPE_SES 2 -+/* -+The EAPOL type is not used anymore. Instead EAPOL messages are now embedded -+within BCMILCP_BCM_SUBTYPE_EVENT type messages -+*/ -+/*#define BCMILCP_BCM_SUBTYPE_EAPOL 3*/ -+ -+#define BCMILCP_BCM_SUBTYPEHDR_MINLENGTH 8 -+#define BCMILCP_BCM_SUBTYPEHDR_VERSION 0 -+ -+/* These fields are stored in network order */ -+typedef struct bcmeth_hdr -+{ -+ uint16 subtype; /* Vendor specific..32769*/ -+ uint16 length; -+ uint8 version; /* Version is 0*/ -+ uint8 oui[3]; /* Broadcom OUI*/ -+ /* user specific Data */ -+ uint16 usr_subtype; -+} PACKED bcmeth_hdr_t; -+ -+ -+ -+#undef PACKED -+#if !defined(__GNUC__) -+#pragma pack() ++#ifndef PCI_MAX_DEVICES ++#define PCI_MAX_DEVICES 0x20 +#endif -+ ++#ifndef PCI_MAX_FUNCTION ++#define PCI_MAX_FUNCTION 0x8 +#endif -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/proto/bcmip.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/proto/bcmip.h ---- linux-2.4.32/arch/mips/bcm947xx/include/proto/bcmip.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/proto/bcmip.h 2005-12-16 23:39:10.756825000 +0100 -@@ -0,0 +1,42 @@ -+/* -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation; -+ * the contents of this file may not be disclosed to third parties, copied -+ * or duplicated in any form, in whole or in part, without the prior -+ * written permission of Broadcom Corporation. -+ * -+ * Fundamental constants relating to IP Protocol -+ * -+ * $Id$ -+ */ -+ -+#ifndef _bcmip_h_ -+#define _bcmip_h_ -+ -+/* IP header */ -+#define IPV4_VERIHL_OFFSET 0 /* version and ihl byte offset */ -+#define IPV4_TOS_OFFSET 1 /* TOS offset */ -+#define IPV4_PROT_OFFSET 9 /* protocol type offset */ -+#define IPV4_CHKSUM_OFFSET 10 /* IP header checksum offset */ -+#define IPV4_SRC_IP_OFFSET 12 /* src IP addr offset */ -+#define IPV4_DEST_IP_OFFSET 16 /* dest IP addr offset */ -+ -+#define IPV4_VER_MASK 0xf0 -+#define IPV4_IHL_MASK 0x0f + -+#define IPV4_PROT_UDP 17 /* UDP protocol type */ -+ -+#define IPV4_ADDR_LEN 4 /* IP v4 address length */ ++#ifndef PCI_INVALID_VENDORID ++#define PCI_INVALID_VENDORID 0xffff ++#endif ++#ifndef PCI_INVALID_DEVICEID ++#define PCI_INVALID_DEVICEID 0xffff ++#endif + -+#define IPV4_VER_NUM 0x40 /* IP v4 version number */ + -+/* NULL IP address check */ -+#define IPV4_ISNULLADDR(a) ((((uint8 *)(a))[0] + ((uint8 *)(a))[1] + \ -+ ((uint8 *)(a))[2] + ((uint8 *)(a))[3]) == 0) ++/* Convert between bus-slot-function-register and config addresses */ + -+#define IPV4_ADDR_STR_LEN 16 ++#define PCICFG_BUS_SHIFT 16 /* Bus shift */ ++#define PCICFG_SLOT_SHIFT 11 /* Slot shift */ ++#define PCICFG_FUN_SHIFT 8 /* Function shift */ ++#define PCICFG_OFF_SHIFT 0 /* Register shift */ + -+#endif /* #ifndef _bcmip_h_ */ ++#define PCICFG_BUS_MASK 0xff /* Bus mask */ ++#define PCICFG_SLOT_MASK 0x1f /* Slot mask */ ++#define PCICFG_FUN_MASK 7 /* Function mask */ ++#define PCICFG_OFF_MASK 0xff /* Bus mask */ + -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/proto/ethernet.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/proto/ethernet.h ---- linux-2.4.32/arch/mips/bcm947xx/include/proto/ethernet.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/proto/ethernet.h 2005-12-16 23:39:10.756825000 +0100 -@@ -0,0 +1,169 @@ -+/******************************************************************************* -+ * $Id$ -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * From FreeBSD 2.2.7: Fundamental constants relating to ethernet. -+ ******************************************************************************/ ++#define PCI_CONFIG_ADDR(b, s, f, o) \ ++ ((((b) & PCICFG_BUS_MASK) << PCICFG_BUS_SHIFT) \ ++ | (((s) & PCICFG_SLOT_MASK) << PCICFG_SLOT_SHIFT) \ ++ | (((f) & PCICFG_FUN_MASK) << PCICFG_FUN_SHIFT) \ ++ | (((o) & PCICFG_OFF_MASK) << PCICFG_OFF_SHIFT)) + -+#ifndef _NET_ETHERNET_H_ /* use native BSD ethernet.h when available */ -+#define _NET_ETHERNET_H_ ++#define PCI_CONFIG_BUS(a) (((a) >> PCICFG_BUS_SHIFT) & PCICFG_BUS_MASK) ++#define PCI_CONFIG_SLOT(a) (((a) >> PCICFG_SLOT_SHIFT) & PCICFG_SLOT_MASK) ++#define PCI_CONFIG_FUN(a) (((a) >> PCICFG_FUN_SHIFT) & PCICFG_FUN_MASK) ++#define PCI_CONFIG_OFF(a) (((a) >> PCICFG_OFF_SHIFT) & PCICFG_OFF_MASK) + -+#ifndef _TYPEDEFS_H_ -+#include "typedefs.h" -+#endif ++/* PCIE Config space accessing MACROS*/ + -+/* enable structure packing */ -+#if defined(__GNUC__) -+#define PACKED __attribute__((packed)) -+#else -+#pragma pack(1) -+#define PACKED -+#endif ++#define PCIECFG_BUS_SHIFT 24 /* Bus shift */ ++#define PCIECFG_SLOT_SHIFT 19 /* Slot/Device shift */ ++#define PCIECFG_FUN_SHIFT 16 /* Function shift */ ++#define PCIECFG_OFF_SHIFT 0 /* Register shift */ + -+/* -+ * The number of bytes in an ethernet (MAC) address. -+ */ -+#define ETHER_ADDR_LEN 6 ++#define PCIECFG_BUS_MASK 0xff /* Bus mask */ ++#define PCIECFG_SLOT_MASK 0x1f /* Slot/Device mask */ ++#define PCIECFG_FUN_MASK 7 /* Function mask */ ++#define PCIECFG_OFF_MASK 0x3ff /* Register mask */ + -+/* -+ * The number of bytes in the type field. -+ */ -+#define ETHER_TYPE_LEN 2 ++#define PCIE_CONFIG_ADDR(b, s, f, o) \ ++ ((((b) & PCIECFG_BUS_MASK) << PCIECFG_BUS_SHIFT) \ ++ | (((s) & PCIECFG_SLOT_MASK) << PCIECFG_SLOT_SHIFT) \ ++ | (((f) & PCIECFG_FUN_MASK) << PCIECFG_FUN_SHIFT) \ ++ | (((o) & PCIECFG_OFF_MASK) << PCIECFG_OFF_SHIFT)) + -+/* -+ * The number of bytes in the trailing CRC field. -+ */ -+#define ETHER_CRC_LEN 4 ++#define PCIE_CONFIG_BUS(a) (((a) >> PCIECFG_BUS_SHIFT) & PCIECFG_BUS_MASK) ++#define PCIE_CONFIG_SLOT(a) (((a) >> PCIECFG_SLOT_SHIFT) & PCIECFG_SLOT_MASK) ++#define PCIE_CONFIG_FUN(a) (((a) >> PCIECFG_FUN_SHIFT) & PCIECFG_FUN_MASK) ++#define PCIE_CONFIG_OFF(a) (((a) >> PCIECFG_OFF_SHIFT) & PCIECFG_OFF_MASK) + -+/* -+ * The length of the combined header. -+ */ -+#define ETHER_HDR_LEN (ETHER_ADDR_LEN*2+ETHER_TYPE_LEN) ++ ++/* The actual config space */ + -+/* -+ * The minimum packet length. -+ */ -+#define ETHER_MIN_LEN 64 ++#define PCI_BAR_MAX 6 + -+/* -+ * The minimum packet user data length. -+ */ -+#define ETHER_MIN_DATA 46 ++#define PCI_ROM_BAR 8 + -+/* -+ * The maximum packet length. -+ */ -+#define ETHER_MAX_LEN 1518 ++#define PCR_RSVDA_MAX 2 + -+/* -+ * The maximum packet user data length. -+ */ -+#define ETHER_MAX_DATA 1500 ++/* pci config status reg has a bit to indicate that capability ptr is present*/ + -+/* ether types */ -+#define ETHER_TYPE_IP 0x0800 /* IP */ -+#define ETHER_TYPE_ARP 0x0806 /* ARP */ -+#define ETHER_TYPE_8021Q 0x8100 /* 802.1Q */ -+#define ETHER_TYPE_BRCM 0x886c /* Broadcom Corp. */ -+#define ETHER_TYPE_802_1X 0x888e /* 802.1x */ -+#define ETHER_TYPE_802_1X_PREAUTH 0x88c7 /* 802.1x preauthentication*/ ++#define PCI_CAPPTR_PRESENT 0x0010 + -+/* Broadcom subtype follows ethertype; First 2 bytes are reserved; Next 2 are subtype; */ -+#define ETHER_BRCM_SUBTYPE_LEN 4 /* Broadcom 4 byte subtype */ -+#define ETHER_BRCM_CRAM 0x1 /* Broadcom subtype cram protocol */ ++typedef struct _pci_config_regs { ++ unsigned short vendor; ++ unsigned short device; ++ unsigned short command; ++ unsigned short status; ++ unsigned char rev_id; ++ unsigned char prog_if; ++ unsigned char sub_class; ++ unsigned char base_class; ++ unsigned char cache_line_size; ++ unsigned char latency_timer; ++ unsigned char header_type; ++ unsigned char bist; ++ unsigned long base[PCI_BAR_MAX]; ++ unsigned long cardbus_cis; ++ unsigned short subsys_vendor; ++ unsigned short subsys_id; ++ unsigned long baserom; ++ unsigned long rsvd_a[PCR_RSVDA_MAX]; ++ unsigned char int_line; ++ unsigned char int_pin; ++ unsigned char min_gnt; ++ unsigned char max_lat; ++ unsigned char dev_dep[192]; ++} pci_config_regs; + -+/* ether header */ -+#define ETHER_DEST_OFFSET 0 /* dest address offset */ -+#define ETHER_SRC_OFFSET 6 /* src address offset */ -+#define ETHER_TYPE_OFFSET 12 /* ether type offset */ ++#define SZPCR (sizeof (pci_config_regs)) ++#define MINSZPCR 64 /* offsetof (dev_dep[0] */ + -+/* -+ * A macro to validate a length with ++/* A structure for the config registers is nice, but in most ++ * systems the config space is not memory mapped, so we need ++ * filed offsetts. :-( + */ -+#define ETHER_IS_VALID_LEN(foo) \ -+ ((foo) >= ETHER_MIN_LEN && (foo) <= ETHER_MAX_LEN) ++#define PCI_CFG_VID 0 ++#define PCI_CFG_DID 2 ++#define PCI_CFG_CMD 4 ++#define PCI_CFG_STAT 6 ++#define PCI_CFG_REV 8 ++#define PCI_CFG_PROGIF 9 ++#define PCI_CFG_SUBCL 0xa ++#define PCI_CFG_BASECL 0xb ++#define PCI_CFG_CLSZ 0xc ++#define PCI_CFG_LATTIM 0xd ++#define PCI_CFG_HDR 0xe ++#define PCI_CFG_BIST 0xf ++#define PCI_CFG_BAR0 0x10 ++#define PCI_CFG_BAR1 0x14 ++#define PCI_CFG_BAR2 0x18 ++#define PCI_CFG_BAR3 0x1c ++#define PCI_CFG_BAR4 0x20 ++#define PCI_CFG_BAR5 0x24 ++#define PCI_CFG_CIS 0x28 ++#define PCI_CFG_SVID 0x2c ++#define PCI_CFG_SSID 0x2e ++#define PCI_CFG_ROMBAR 0x30 ++#define PCI_CFG_CAPPTR 0x34 ++#define PCI_CFG_INT 0x3c ++#define PCI_CFG_PIN 0x3d ++#define PCI_CFG_MINGNT 0x3e ++#define PCI_CFG_MAXLAT 0x3f + ++/* Classes and subclasses */ + -+#ifndef __INCif_etherh /* Quick and ugly hack for VxWorks */ -+/* -+ * Structure of a 10Mb/s Ethernet header. -+ */ -+struct ether_header { -+ uint8 ether_dhost[ETHER_ADDR_LEN]; -+ uint8 ether_shost[ETHER_ADDR_LEN]; -+ uint16 ether_type; -+} PACKED; ++typedef enum { ++ PCI_CLASS_OLD = 0, ++ PCI_CLASS_DASDI, ++ PCI_CLASS_NET, ++ PCI_CLASS_DISPLAY, ++ PCI_CLASS_MMEDIA, ++ PCI_CLASS_MEMORY, ++ PCI_CLASS_BRIDGE, ++ PCI_CLASS_COMM, ++ PCI_CLASS_BASE, ++ PCI_CLASS_INPUT, ++ PCI_CLASS_DOCK, ++ PCI_CLASS_CPU, ++ PCI_CLASS_SERIAL, ++ PCI_CLASS_INTELLIGENT = 0xe, ++ PCI_CLASS_SATELLITE, ++ PCI_CLASS_CRYPT, ++ PCI_CLASS_DSP, ++ PCI_CLASS_MAX ++} pci_classes; + -+/* -+ * Structure of a 48-bit Ethernet address. -+ */ -+struct ether_addr { -+ uint8 octet[ETHER_ADDR_LEN]; -+} PACKED; -+#endif ++typedef enum { ++ PCI_DASDI_SCSI, ++ PCI_DASDI_IDE, ++ PCI_DASDI_FLOPPY, ++ PCI_DASDI_IPI, ++ PCI_DASDI_RAID, ++ PCI_DASDI_OTHER = 0x80 ++} pci_dasdi_subclasses; + -+/* -+ * Takes a pointer, sets locally admininistered -+ * address bit in the 48-bit Ethernet address. -+ */ -+#define ETHER_SET_LOCALADDR(ea) ( ((uint8 *)(ea))[0] = \ -+ (((uint8 *)(ea))[0] | 2) ) ++typedef enum { ++ PCI_NET_ETHER, ++ PCI_NET_TOKEN, ++ PCI_NET_FDDI, ++ PCI_NET_ATM, ++ PCI_NET_OTHER = 0x80 ++} pci_net_subclasses; + -+/* -+ * Takes a pointer, returns true if a 48-bit multicast address -+ * (including broadcast, since it is all ones) -+ */ -+#define ETHER_ISMULTI(ea) (((uint8 *)(ea))[0] & 1) ++typedef enum { ++ PCI_DISPLAY_VGA, ++ PCI_DISPLAY_XGA, ++ PCI_DISPLAY_3D, ++ PCI_DISPLAY_OTHER = 0x80 ++} pci_display_subclasses; + ++typedef enum { ++ PCI_MMEDIA_VIDEO, ++ PCI_MMEDIA_AUDIO, ++ PCI_MMEDIA_PHONE, ++ PCI_MEDIA_OTHER = 0x80 ++} pci_mmedia_subclasses; + -+/* compare two ethernet addresses - assumes the pointers can be referenced as shorts */ -+#define ether_cmp(a, b) ( \ -+ !(((short*)a)[0] == ((short*)b)[0]) | \ -+ !(((short*)a)[1] == ((short*)b)[1]) | \ -+ !(((short*)a)[2] == ((short*)b)[2])) ++typedef enum { ++ PCI_MEMORY_RAM, ++ PCI_MEMORY_FLASH, ++ PCI_MEMORY_OTHER = 0x80 ++} pci_memory_subclasses; + -+/* copy an ethernet address - assumes the pointers can be referenced as shorts */ -+#define ether_copy(s, d) { \ -+ ((short*)d)[0] = ((short*)s)[0]; \ -+ ((short*)d)[1] = ((short*)s)[1]; \ -+ ((short*)d)[2] = ((short*)s)[2]; } ++typedef enum { ++ PCI_BRIDGE_HOST, ++ PCI_BRIDGE_ISA, ++ PCI_BRIDGE_EISA, ++ PCI_BRIDGE_MC, ++ PCI_BRIDGE_PCI, ++ PCI_BRIDGE_PCMCIA, ++ PCI_BRIDGE_NUBUS, ++ PCI_BRIDGE_CARDBUS, ++ PCI_BRIDGE_RACEWAY, ++ PCI_BRIDGE_OTHER = 0x80 ++} pci_bridge_subclasses; + -+/* -+ * Takes a pointer, returns true if a 48-bit broadcast (all ones) -+ */ -+#define ETHER_ISBCAST(ea) ((((uint8 *)(ea))[0] & \ -+ ((uint8 *)(ea))[1] & \ -+ ((uint8 *)(ea))[2] & \ -+ ((uint8 *)(ea))[3] & \ -+ ((uint8 *)(ea))[4] & \ -+ ((uint8 *)(ea))[5]) == 0xff) ++typedef enum { ++ PCI_COMM_UART, ++ PCI_COMM_PARALLEL, ++ PCI_COMM_MULTIUART, ++ PCI_COMM_MODEM, ++ PCI_COMM_OTHER = 0x80 ++} pci_comm_subclasses; + -+static const struct ether_addr ether_bcast = {{255, 255, 255, 255, 255, 255}}; ++typedef enum { ++ PCI_BASE_PIC, ++ PCI_BASE_DMA, ++ PCI_BASE_TIMER, ++ PCI_BASE_RTC, ++ PCI_BASE_PCI_HOTPLUG, ++ PCI_BASE_OTHER = 0x80 ++} pci_base_subclasses; + -+/* -+ * Takes a pointer, returns true if a 48-bit null address (all zeros) -+ */ -+#define ETHER_ISNULLADDR(ea) ((((uint8 *)(ea))[0] | \ -+ ((uint8 *)(ea))[1] | \ -+ ((uint8 *)(ea))[2] | \ -+ ((uint8 *)(ea))[3] | \ -+ ((uint8 *)(ea))[4] | \ -+ ((uint8 *)(ea))[5]) == 0) -+ -+/* Differentiated Services Codepoint - upper 6 bits of tos in iphdr */ -+#define DSCP_MASK 0xFC /* upper 6 bits */ -+#define DSCP_SHIFT 2 -+#define DSCP_WME_PRI_MASK 0xE0 /* upper 3 bits */ -+#define DSCP_WME_PRI_SHIFT 5 -+ -+#undef PACKED -+#if !defined(__GNUC__) -+#pragma pack() -+#endif ++typedef enum { ++ PCI_INPUT_KBD, ++ PCI_INPUT_PEN, ++ PCI_INPUT_MOUSE, ++ PCI_INPUT_SCANNER, ++ PCI_INPUT_GAMEPORT, ++ PCI_INPUT_OTHER = 0x80 ++} pci_input_subclasses; + -+#endif /* _NET_ETHERNET_H_ */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/proto/vlan.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/proto/vlan.h ---- linux-2.4.32/arch/mips/bcm947xx/include/proto/vlan.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/proto/vlan.h 2005-12-16 23:39:10.756825000 +0100 -@@ -0,0 +1,50 @@ -+/* -+ * 802.1Q VLAN protocol definitions -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ -+ */ ++typedef enum { ++ PCI_DOCK_GENERIC, ++ PCI_DOCK_OTHER = 0x80 ++} pci_dock_subclasses; + -+#ifndef _vlan_h_ -+#define _vlan_h_ ++typedef enum { ++ PCI_CPU_386, ++ PCI_CPU_486, ++ PCI_CPU_PENTIUM, ++ PCI_CPU_ALPHA = 0x10, ++ PCI_CPU_POWERPC = 0x20, ++ PCI_CPU_MIPS = 0x30, ++ PCI_CPU_COPROC = 0x40, ++ PCI_CPU_OTHER = 0x80 ++} pci_cpu_subclasses; + -+/* enable structure packing */ -+#if defined(__GNUC__) -+#define PACKED __attribute__((packed)) -+#else -+#pragma pack(1) -+#define PACKED -+#endif ++typedef enum { ++ PCI_SERIAL_IEEE1394, ++ PCI_SERIAL_ACCESS, ++ PCI_SERIAL_SSA, ++ PCI_SERIAL_USB, ++ PCI_SERIAL_FIBER, ++ PCI_SERIAL_SMBUS, ++ PCI_SERIAL_OTHER = 0x80 ++} pci_serial_subclasses; + -+#define VLAN_VID_MASK 0xfff /* low 12 bits are vlan id */ -+#define VLAN_CFI_SHIFT 12 /* canonical format indicator bit */ -+#define VLAN_PRI_SHIFT 13 /* user priority */ ++typedef enum { ++ PCI_INTELLIGENT_I2O, ++} pci_intelligent_subclasses; + -+#define VLAN_PRI_MASK 7 /* 3 bits of priority */ ++typedef enum { ++ PCI_SATELLITE_TV, ++ PCI_SATELLITE_AUDIO, ++ PCI_SATELLITE_VOICE, ++ PCI_SATELLITE_DATA, ++ PCI_SATELLITE_OTHER = 0x80 ++} pci_satellite_subclasses; + -+#define VLAN_TAG_LEN 4 -+#define VLAN_TAG_OFFSET (2 * ETHER_ADDR_LEN) ++typedef enum { ++ PCI_CRYPT_NETWORK, ++ PCI_CRYPT_ENTERTAINMENT, ++ PCI_CRYPT_OTHER = 0x80 ++} pci_crypt_subclasses; + -+struct ethervlan_header { -+ uint8 ether_dhost[ETHER_ADDR_LEN]; -+ uint8 ether_shost[ETHER_ADDR_LEN]; -+ uint16 vlan_type; /* 0x8100 */ -+ uint16 vlan_tag; /* priority, cfi and vid */ -+ uint16 ether_type; -+}; ++typedef enum { ++ PCI_DSP_DPIO, ++ PCI_DSP_OTHER = 0x80 ++} pci_dsp_subclasses; + -+#define ETHERVLAN_HDR_LEN (ETHER_HDR_LEN + VLAN_TAG_LEN) ++/* Header types */ ++typedef enum { ++ PCI_HEADER_NORMAL, ++ PCI_HEADER_BRIDGE, ++ PCI_HEADER_CARDBUS ++} pci_header_types; + -+#undef PACKED -+#if !defined(__GNUC__) -+#pragma pack() -+#endif + -+#endif /* _vlan_h_ */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/proto/wpa.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/proto/wpa.h ---- linux-2.4.32/arch/mips/bcm947xx/include/proto/wpa.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/proto/wpa.h 2005-12-16 23:39:10.756825000 +0100 -@@ -0,0 +1,140 @@ -+/* -+ * Fundamental types and constants relating to WPA -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ -+ */ ++/* Overlay for a PCI-to-PCI bridge */ + -+#ifndef _proto_wpa_h_ -+#define _proto_wpa_h_ ++#define PPB_RSVDA_MAX 2 ++#define PPB_RSVDD_MAX 8 + -+#include -+#include ++typedef struct _ppb_config_regs { ++ unsigned short vendor; ++ unsigned short device; ++ unsigned short command; ++ unsigned short status; ++ unsigned char rev_id; ++ unsigned char prog_if; ++ unsigned char sub_class; ++ unsigned char base_class; ++ unsigned char cache_line_size; ++ unsigned char latency_timer; ++ unsigned char header_type; ++ unsigned char bist; ++ unsigned long rsvd_a[PPB_RSVDA_MAX]; ++ unsigned char prim_bus; ++ unsigned char sec_bus; ++ unsigned char sub_bus; ++ unsigned char sec_lat; ++ unsigned char io_base; ++ unsigned char io_lim; ++ unsigned short sec_status; ++ unsigned short mem_base; ++ unsigned short mem_lim; ++ unsigned short pf_mem_base; ++ unsigned short pf_mem_lim; ++ unsigned long pf_mem_base_hi; ++ unsigned long pf_mem_lim_hi; ++ unsigned short io_base_hi; ++ unsigned short io_lim_hi; ++ unsigned short subsys_vendor; ++ unsigned short subsys_id; ++ unsigned long rsvd_b; ++ unsigned char rsvd_c; ++ unsigned char int_pin; ++ unsigned short bridge_ctrl; ++ unsigned char chip_ctrl; ++ unsigned char diag_ctrl; ++ unsigned short arb_ctrl; ++ unsigned long rsvd_d[PPB_RSVDD_MAX]; ++ unsigned char dev_dep[192]; ++} ppb_config_regs; + -+/* enable structure packing */ -+#if defined(__GNUC__) -+#define PACKED __attribute__((packed)) -+#else -+#pragma pack(1) -+#define PACKED -+#endif + -+/* Reason Codes */ -+ -+/* 10 and 11 are from TGh. */ -+#define DOT11_RC_BAD_PC 10 /* Unacceptable power capability element */ -+#define DOT11_RC_BAD_CHANNELS 11 /* Unacceptable supported channels element */ -+/* 12 is unused */ -+/* 13 through 23 taken from P802.11i/D3.0, November 2002 */ -+#define DOT11_RC_INVALID_WPA_IE 13 /* Invalid info. element */ -+#define DOT11_RC_MIC_FAILURE 14 /* Michael failure */ -+#define DOT11_RC_4WH_TIMEOUT 15 /* 4-way handshake timeout */ -+#define DOT11_RC_GTK_UPDATE_TIMEOUT 16 /* Group key update timeout */ -+#define DOT11_RC_WPA_IE_MISMATCH 17 /* WPA IE in 4-way handshake differs from (re-)assoc. request/probe response */ -+#define DOT11_RC_INVALID_MC_CIPHER 18 /* Invalid multicast cipher */ -+#define DOT11_RC_INVALID_UC_CIPHER 19 /* Invalid unicast cipher */ -+#define DOT11_RC_INVALID_AKMP 20 /* Invalid authenticated key management protocol */ -+#define DOT11_RC_BAD_WPA_VERSION 21 /* Unsupported WPA version */ -+#define DOT11_RC_INVALID_WPA_CAP 22 /* Invalid WPA IE capabilities */ -+#define DOT11_RC_8021X_AUTH_FAIL 23 /* 802.1X authentication failure */ -+ -+#define WPA2_PMKID_LEN 16 -+ -+/* WPA IE fixed portion */ -+typedef struct -+{ -+ uint8 tag; /* TAG */ -+ uint8 length; /* TAG length */ -+ uint8 oui[3]; /* IE OUI */ -+ uint8 oui_type; /* OUI type */ -+ struct { -+ uint8 low; -+ uint8 high; -+ } PACKED version; /* IE version */ -+} PACKED wpa_ie_fixed_t; -+#define WPA_IE_OUITYPE_LEN 4 -+#define WPA_IE_FIXED_LEN 8 -+#define WPA_IE_TAG_FIXED_LEN 6 ++/* PCI CAPABILITY DEFINES */ ++#define PCI_CAP_POWERMGMTCAP_ID 0x01 ++#define PCI_CAP_MSICAP_ID 0x05 ++#define PCI_CAP_PCIECAP_ID 0x10 + -+typedef struct { -+ uint8 tag; /* TAG */ -+ uint8 length; /* TAG length */ -+ struct { -+ uint8 low; -+ uint8 high; -+ } PACKED version; /* IE version */ -+} PACKED wpa_rsn_ie_fixed_t; -+#define WPA_RSN_IE_FIXED_LEN 4 -+#define WPA_RSN_IE_TAG_FIXED_LEN 2 -+typedef uint8 wpa_pmkid_t[WPA2_PMKID_LEN]; -+ -+/* WPA suite/multicast suite */ -+typedef struct -+{ -+ uint8 oui[3]; -+ uint8 type; -+} PACKED wpa_suite_t, wpa_suite_mcast_t; -+#define WPA_SUITE_LEN 4 -+ -+/* WPA unicast suite list/key management suite list */ -+typedef struct -+{ -+ struct { -+ uint8 low; -+ uint8 high; -+ } PACKED count; -+ wpa_suite_t list[1]; -+} PACKED wpa_suite_ucast_t, wpa_suite_auth_key_mgmt_t; -+#define WPA_IE_SUITE_COUNT_LEN 2 -+typedef struct -+{ -+ struct { -+ uint8 low; -+ uint8 high; -+ } PACKED count; -+ wpa_pmkid_t list[1]; -+} PACKED wpa_pmkid_list_t; -+ -+/* WPA cipher suites */ -+#define WPA_CIPHER_NONE 0 /* None */ -+#define WPA_CIPHER_WEP_40 1 /* WEP (40-bit) */ -+#define WPA_CIPHER_TKIP 2 /* TKIP: default for WPA */ -+#define WPA_CIPHER_AES_OCB 3 /* AES (OCB) */ -+#define WPA_CIPHER_AES_CCM 4 /* AES (CCM) */ -+#define WPA_CIPHER_WEP_104 5 /* WEP (104-bit) */ -+ -+#define IS_WPA_CIPHER(cipher) ((cipher) == WPA_CIPHER_NONE || \ -+ (cipher) == WPA_CIPHER_WEP_40 || \ -+ (cipher) == WPA_CIPHER_WEP_104 || \ -+ (cipher) == WPA_CIPHER_TKIP || \ -+ (cipher) == WPA_CIPHER_AES_OCB || \ -+ (cipher) == WPA_CIPHER_AES_CCM) -+ -+/* WPA TKIP countermeasures parameters */ -+#define WPA_TKIP_CM_DETECT 60 /* multiple MIC failure window (seconds) */ -+#define WPA_TKIP_CM_BLOCK 60 /* countermeasures active window (seconds) */ -+ -+/* WPA capabilities defined in 802.11i */ -+#define WPA_CAP_4_REPLAY_CNTRS 2 -+#define WPA_CAP_16_REPLAY_CNTRS 3 -+#define WPA_CAP_REPLAY_CNTR_SHIFT 2 -+#define WPA_CAP_REPLAY_CNTR_MASK 0x000c -+ -+/* WPA Specific defines */ -+#define WPA_CAP_LEN 2 -+ -+#define WPA_CAP_WPA2_PREAUTH 1 -+ -+#undef PACKED -+#if !defined(__GNUC__) -+#pragma pack() -+#endif ++/* Data structure to define the Message Signalled Interrupt facility ++ * Valid for PCI and PCIE configurations */ ++typedef struct _pciconfig_cap_msi { ++ unsigned char capID; ++ unsigned char nextptr; ++ unsigned short msgctrl; ++ unsigned int msgaddr; ++} pciconfig_cap_msi; + -+#endif /* _proto_wpa_h_ */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/rts/crc.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/rts/crc.h ---- linux-2.4.32/arch/mips/bcm947xx/include/rts/crc.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/rts/crc.h 2005-12-16 23:39:10.928835750 +0100 -@@ -0,0 +1,69 @@ -+/******************************************************************************* -+ * $Id$ -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * crc.h - a function to compute crc for iLine10 headers -+ ******************************************************************************/ ++/* Data structure to define the Power managment facility ++ * Valid for PCI and PCIE configurations */ ++typedef struct _pciconfig_cap_pwrmgmt { ++ unsigned char capID; ++ unsigned char nextptr; ++ unsigned short pme_cap; ++ unsigned short pme_sts_ctrl; ++ unsigned char pme_bridge_ext; ++ unsigned char data; ++} pciconfig_cap_pwrmgmt; + -+#ifndef _RTS_CRC_H_ -+#define _RTS_CRC_H_ 1 ++/* Data structure to define the PCIE capability */ ++typedef struct _pciconfig_cap_pcie { ++ unsigned char capID; ++ unsigned char nextptr; ++ unsigned short pcie_cap; ++ unsigned int dev_cap; ++ unsigned short dev_ctrl; ++ unsigned short dev_status; ++ unsigned int link_cap; ++ unsigned short link_ctrl; ++ unsigned short link_status; ++} pciconfig_cap_pcie; + -+#include "typedefs.h" ++/* PCIE Enhanced CAPABILITY DEFINES */ ++#define PCIE_EXTCFG_OFFSET 0x100 ++#define PCIE_ADVERRREP_CAPID 0x0001 ++#define PCIE_VC_CAPID 0x0002 ++#define PCIE_DEVSNUM_CAPID 0x0003 ++#define PCIE_PWRBUDGET_CAPID 0x0004 + -+#ifdef __cplusplus -+extern "C" { -+#endif ++/* Header to define the PCIE specific capabilities in the extended config space */ ++typedef struct _pcie_enhanced_caphdr { ++ unsigned short capID; ++ unsigned short cap_ver : 4; ++ unsigned short next_ptr : 12; ++} pcie_enhanced_caphdr; + + -+#define CRC8_INIT_VALUE 0xff /* Initial CRC8 checksum value */ -+#define CRC8_GOOD_VALUE 0x9f /* Good final CRC8 checksum value */ -+#define HCS_GOOD_VALUE 0x39 /* Good final header checksum value */ ++/* Everything below is BRCM HND proprietary */ + -+#define CRC16_INIT_VALUE 0xffff /* Initial CRC16 checksum value */ -+#define CRC16_GOOD_VALUE 0xf0b8 /* Good final CRC16 checksum value */ ++#define PCI_BAR0_WIN 0x80 /* backplane addres space accessed by BAR0 */ ++#define PCI_BAR1_WIN 0x84 /* backplane addres space accessed by BAR1 */ ++#define PCI_SPROM_CONTROL 0x88 /* sprom property control */ ++#define PCI_BAR1_CONTROL 0x8c /* BAR1 region burst control */ ++#define PCI_INT_STATUS 0x90 /* PCI and other cores interrupts */ ++#define PCI_INT_MASK 0x94 /* mask of PCI and other cores interrupts */ ++#define PCI_TO_SB_MB 0x98 /* signal backplane interrupts */ ++#define PCI_BACKPLANE_ADDR 0xA0 /* address an arbitrary location on the system backplane */ ++#define PCI_BACKPLANE_DATA 0xA4 /* data at the location specified by above address register */ ++#define PCI_GPIO_IN 0xb0 /* pci config space gpio input (>=rev3) */ ++#define PCI_GPIO_OUT 0xb4 /* pci config space gpio output (>=rev3) */ ++#define PCI_GPIO_OUTEN 0xb8 /* pci config space gpio output enable (>=rev3) */ + -+#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */ -+#define CRC32_GOOD_VALUE 0xdebb20e3 /* Good final CRC32 checksum value */ ++#define PCI_BAR0_SPROM_OFFSET (4 * 1024) /* bar0 + 4K accesses external sprom */ ++#define PCI_BAR0_PCIREGS_OFFSET (6 * 1024) /* bar0 + 6K accesses pci core registers */ + -+void hcs(uint8 *, uint); -+uint8 crc8(uint8 *, uint, uint8); -+uint16 crc16(uint8 *, uint, uint16); -+uint32 crc32(uint8 *, uint, uint32); ++/* PCI_INT_STATUS */ ++#define PCI_SBIM_STATUS_SERR 0x4 /* backplane SBErr interrupt status */ + -+/* macros for common usage */ ++/* PCI_INT_MASK */ ++#define PCI_SBIM_SHIFT 8 /* backplane core interrupt mask bits offset */ ++#define PCI_SBIM_MASK 0xff00 /* backplane core interrupt mask */ ++#define PCI_SBIM_MASK_SERR 0x4 /* backplane SBErr interrupt mask */ + -+#define APPEND_CRC8(pbytes, nbytes) \ -+do { \ -+ uint8 tmp = crc8(pbytes, nbytes, CRC8_INIT_VALUE) ^ 0xff; \ -+ (pbytes)[(nbytes)] = tmp; \ -+ (nbytes) += 1; \ -+} while (0) ++/* PCI_SPROM_CONTROL */ ++#define SPROM_BLANK 0x04 /* indicating a blank sprom */ ++#define SPROM_WRITEEN 0x10 /* sprom write enable */ ++#define SPROM_BOOTROM_WE 0x20 /* external bootrom write enable */ + -+#define APPEND_CRC16(pbytes, nbytes) \ -+do { \ -+ uint16 tmp = crc16(pbytes, nbytes, CRC16_INIT_VALUE) ^ 0xffff; \ -+ (pbytes)[(nbytes) + 0] = (tmp >> 0) & 0xff; \ -+ (pbytes)[(nbytes) + 1] = (tmp >> 8) & 0xff; \ -+ (nbytes) += 2; \ -+} while (0) ++#define SPROM_SIZE 256 /* sprom size in 16-bit */ ++#define SPROM_CRC_RANGE 64 /* crc cover range in 16-bit */ + -+#define APPEND_CRC32(pbytes, nbytes) \ -+do { \ -+ uint32 tmp = crc32(pbytes, nbytes, CRC32_INIT_VALUE) ^ 0xffffffff; \ -+ (pbytes)[(nbytes) + 0] = (tmp >> 0) & 0xff; \ -+ (pbytes)[(nbytes) + 1] = (tmp >> 8) & 0xff; \ -+ (pbytes)[(nbytes) + 2] = (tmp >> 16) & 0xff; \ -+ (pbytes)[(nbytes) + 3] = (tmp >> 24) & 0xff; \ -+ (nbytes) += 4; \ -+} while (0) ++/* PCI_CFG_CMD_STAT */ ++#define PCI_CFG_CMD_STAT_TA 0x08000000 /* target abort status */ + -+#ifdef __cplusplus -+} +#endif -+ -+#endif /* _RTS_CRC_H_ */ diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/sbchipc.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/sbchipc.h --- linux-2.4.32/arch/mips/bcm947xx/include/sbchipc.h 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/sbchipc.h 2005-12-16 23:39:10.932836000 +0100 @@ -9367,1040 +6345,6 @@ diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/typedefs.h linux-2.4.32-brcm/a +#endif /* USE_TYPEDEF_DEFAULTS */ + +#endif /* _TYPEDEFS_H_ */ -diff -Nur linux-2.4.32/arch/mips/bcm947xx/include/wlioctl.h linux-2.4.32-brcm/arch/mips/bcm947xx/include/wlioctl.h ---- linux-2.4.32/arch/mips/bcm947xx/include/wlioctl.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.32-brcm/arch/mips/bcm947xx/include/wlioctl.h 2005-12-16 23:39:10.940836500 +0100 -@@ -0,0 +1,1030 @@ -+/* -+ * Custom OID/ioctl definitions for -+ * Broadcom 802.11abg Networking Device Driver -+ * -+ * Definitions subject to change without notice. -+ * -+ * Copyright 2005, Broadcom Corporation -+ * All Rights Reserved. -+ * -+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -+ * -+ * $Id$ -+ */ -+ -+#ifndef _wlioctl_h_ -+#define _wlioctl_h_ -+ -+#include -+#include -+#include -+#include -+#include -+ -+/* require default structure packing */ -+#if !defined(__GNUC__) -+#pragma pack(push,8) -+#endif -+ -+#define WL_NUMRATES 255 /* max # of rates in a rateset */ -+ -+typedef struct wl_rateset { -+ uint32 count; /* # rates in this set */ -+ uint8 rates[WL_NUMRATES]; /* rates in 500kbps units w/hi bit set if basic */ -+} wl_rateset_t; -+ -+#define WL_CHANSPEC_CHAN_MASK 0x0fff -+#define WL_CHANSPEC_BAND_MASK 0xf000 -+#define WL_CHANSPEC_BAND_SHIFT 12 -+#define WL_CHANSPEC_BAND_A 0x1000 -+#define WL_CHANSPEC_BAND_B 0x2000 -+ -+/* -+ * Per-bss information structure. -+ */ -+ -+#define WL_BSS_INFO_VERSION 107 /* current version of wl_bss_info struct */ -+ -+typedef struct wl_bss_info { -+ uint32 version; /* version field */ -+ uint32 length; /* byte length of data in this record, starting at version and including IEs */ -+ struct ether_addr BSSID; -+ uint16 beacon_period; /* units are Kusec */ -+ uint16 capability; /* Capability information */ -+ uint8 SSID_len; -+ uint8 SSID[32]; -+ struct { -+ uint count; /* # rates in this set */ -+ uint8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */ -+ } rateset; /* supported rates */ -+ uint8 channel; /* Channel no. */ -+ uint16 atim_window; /* units are Kusec */ -+ uint8 dtim_period; /* DTIM period */ -+ int16 RSSI; /* receive signal strength (in dBm) */ -+ int8 phy_noise; /* noise (in dBm) */ -+ uint32 ie_length; /* byte length of Information Elements */ -+ /* variable length Information Elements */ -+} wl_bss_info_t; -+ -+typedef struct wlc_ssid { -+ uint32 SSID_len; -+ uchar SSID[32]; -+} wlc_ssid_t; -+ -+typedef struct wl_scan_params { -+ wlc_ssid_t ssid; /* default is {0, ""} */ -+ struct ether_addr bssid;/* default is bcast */ -+ int8 bss_type; /* default is any, DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT */ -+ int8 scan_type; /* -1 use default, DOT11_SCANTYPE_ACTIVE/PASSIVE */ -+ int32 nprobes; /* -1 use default, number of probes per channel */ -+ int32 active_time; /* -1 use default, dwell time per channel for active scanning */ -+ int32 passive_time; /* -1 use default, dwell time per channel for passive scanning */ -+ int32 home_time; /* -1 use default, dwell time for the home channel between channel scans */ -+ int32 channel_num; /* 0 use default (all available channels), count of channels in channel_list */ -+ uint16 channel_list[1]; /* list of chanspecs */ -+} wl_scan_params_t; -+/* size of wl_scan_params not including variable length array */ -+#define WL_SCAN_PARAMS_FIXED_SIZE 64 -+ -+typedef struct wl_scan_results { -+ uint32 buflen; -+ uint32 version; -+ uint32 count; -+ wl_bss_info_t bss_info[1]; -+} wl_scan_results_t; -+/* size of wl_scan_results not including variable length array */ -+#define WL_SCAN_RESULTS_FIXED_SIZE 12 -+ -+/* uint32 list */ -+typedef struct wl_uint32_list { -+ /* in - # of elements, out - # of entries */ -+ uint32 count; -+ /* variable length uint32 list */ -+ uint32 element[1]; -+} wl_uint32_list_t; -+ -+#define WLC_CNTRY_BUF_SZ 4 /* Country string is 3 bytes + NULL */ -+ -+typedef struct wl_channels_in_country { -+ uint32 buflen; -+ uint32 band; -+ char country_abbrev[WLC_CNTRY_BUF_SZ]; -+ uint32 count; -+ uint32 channel[1]; -+} wl_channels_in_country_t; -+ -+typedef struct wl_country_list { -+ uint32 buflen; -+ uint32 band_set; -+ uint32 band; -+ uint32 count; -+ char country_abbrev[1]; -+} wl_country_list_t; -+ -+#define WL_RM_TYPE_BASIC 1 -+#define WL_RM_TYPE_CCA 2 -+#define WL_RM_TYPE_RPI 3 -+ -+#define WL_RM_FLAG_PARALLEL (1<<0) -+ -+#define WL_RM_FLAG_LATE (1<<1) -+#define WL_RM_FLAG_INCAPABLE (1<<2) -+#define WL_RM_FLAG_REFUSED (1<<3) -+ -+typedef struct wl_rm_req_elt { -+ int8 type; -+ int8 flags; -+ uint16 chanspec; -+ uint32 token; /* token for this measurement */ -+ uint32 tsf_h; /* TSF high 32-bits of Measurement start time */ -+ uint32 tsf_l; /* TSF low 32-bits */ -+ uint32 dur; /* TUs */ -+} wl_rm_req_elt_t; -+ -+typedef struct wl_rm_req { -+ uint32 token; /* overall measurement set token */ -+ uint32 count; /* number of measurement reqests */ -+ wl_rm_req_elt_t req[1]; /* variable length block of requests */ -+} wl_rm_req_t; -+#define WL_RM_REQ_FIXED_LEN 8 -+ -+typedef struct wl_rm_rep_elt { -+ int8 type; -+ int8 flags; -+ uint16 chanspec; -+ uint32 token; /* token for this measurement */ -+ uint32 tsf_h; /* TSF high 32-bits of Measurement start time */ -+ uint32 tsf_l; /* TSF low 32-bits */ -+ uint32 dur; /* TUs */ -+ uint32 len; /* byte length of data block */ -+ uint8 data[1]; /* variable length data block */ -+} wl_rm_rep_elt_t; -+#define WL_RM_REP_ELT_FIXED_LEN 24 /* length excluding data block */ -+ -+#define WL_RPI_REP_BIN_NUM 8 -+typedef struct wl_rm_rpi_rep { -+ uint8 rpi[WL_RPI_REP_BIN_NUM]; -+ int8 rpi_max[WL_RPI_REP_BIN_NUM]; -+} wl_rm_rpi_rep_t; -+ -+typedef struct wl_rm_rep { -+ uint32 token; /* overall measurement set token */ -+ uint32 len; /* length of measurement report block */ -+ wl_rm_rep_elt_t rep[1]; /* variable length block of reports */ -+} wl_rm_rep_t; -+#define WL_RM_REP_FIXED_LEN 8 -+ -+ -+#if defined(BCMSUP_PSK) -+typedef enum sup_auth_status { -+ WLC_SUP_DISCONNECTED = 0, -+ WLC_SUP_CONNECTING, -+ WLC_SUP_IDREQUIRED, -+ WLC_SUP_AUTHENTICATING, -+ WLC_SUP_AUTHENTICATED, -+ WLC_SUP_KEYXCHANGE, -+ WLC_SUP_KEYED, -+ WLC_SUP_TIMEOUT -+} sup_auth_status_t; -+#endif /* BCMCCX | BCMSUP_PSK */ -+ -+/* Enumerate crypto algorithms */ -+#define CRYPTO_ALGO_OFF 0 -+#define CRYPTO_ALGO_WEP1 1 -+#define CRYPTO_ALGO_TKIP 2 -+#define CRYPTO_ALGO_WEP128 3 -+#define CRYPTO_ALGO_AES_CCM 4 -+#define CRYPTO_ALGO_AES_OCB_MSDU 5 -+#define CRYPTO_ALGO_AES_OCB_MPDU 6 -+#define CRYPTO_ALGO_NALG 7 -+ -+#define WSEC_GEN_MIC_ERROR 0x0001 -+#define WSEC_GEN_REPLAY 0x0002 -+ -+#define WL_SOFT_KEY (1 << 0) /* Indicates this key is using soft encrypt */ -+#define WL_PRIMARY_KEY (1 << 1) /* Indicates this key is the primary (ie tx) key */ -+#define WL_KF_RES_4 (1 << 4) /* Reserved for backward compat */ -+#define WL_KF_RES_5 (1 << 5) /* Reserved for backward compat */ -+ -+typedef struct wl_wsec_key { -+ uint32 index; /* key index */ -+ uint32 len; /* key length */ -+ uint8 data[DOT11_MAX_KEY_SIZE]; /* key data */ -+ uint32 pad_1[18]; -+ uint32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */ -+ uint32 flags; /* misc flags */ -+ uint32 pad_2[2]; -+ int pad_3; -+ int iv_initialized; /* has IV been initialized already? */ -+ int pad_4; -+ /* Rx IV */ -+ struct { -+ uint32 hi; /* upper 32 bits of IV */ -+ uint16 lo; /* lower 16 bits of IV */ -+ } rxiv; -+ uint32 pad_5[2]; -+ struct ether_addr ea; /* per station */ -+} wl_wsec_key_t; -+ -+ -+#define WSEC_MIN_PSK_LEN 8 -+#define WSEC_MAX_PSK_LEN 64 -+ -+/* Flag for key material needing passhash'ing */ -+#define WSEC_PASSPHRASE (1<<0) -+ -+/* recepticle for WLC_SET_WSEC_PMK parameter */ -+typedef struct { -+ ushort key_len; /* octets in key material */ -+ ushort flags; /* key handling qualification */ -+ uint8 key[WSEC_MAX_PSK_LEN]; /* PMK material */ -+} wsec_pmk_t; -+ -+/* wireless security bitvec */ -+#define WEP_ENABLED 0x0001 -+#define TKIP_ENABLED 0x0002 -+#define AES_ENABLED 0x0004 -+#define WSEC_SWFLAG 0x0008 -+#define SES_OW_ENABLED 0x0040 /* to go into transition mode without setting wep */ -+ -+/* WPA authentication mode bitvec */ -+#define WPA_AUTH_DISABLED 0x0000 /* Legacy (i.e., non-WPA) */ -+#define WPA_AUTH_NONE 0x0001 /* none (IBSS) */ -+#define WPA_AUTH_UNSPECIFIED 0x0002 /* over 802.1x */ -+#define WPA_AUTH_PSK 0x0004 /* Pre-shared key */ -+/*#define WPA_AUTH_8021X 0x0020*/ /* 802.1x, reserved */ -+ -+#define WPA2_AUTH_UNSPECIFIED 0x0040 /* over 802.1x */ -+#define WPA2_AUTH_PSK 0x0080 /* Pre-shared key */ -+ -+ -+ -+/* pmkid */ -+#define MAXPMKID 16 -+ -+typedef struct _pmkid -+{ -+ struct ether_addr BSSID; -+ uint8 PMKID[WPA2_PMKID_LEN]; -+} pmkid_t; -+ -+typedef struct _pmkid_list -+{ -+ uint32 npmkid; -+ pmkid_t pmkid[1]; -+} pmkid_list_t; -+ -+typedef struct _pmkid_cand { -+ struct ether_addr BSSID; -+ uint8 preauth; -+} pmkid_cand_t; -+ -+typedef struct _pmkid_cand_list { -+ uint32 npmkid_cand; -+ pmkid_cand_t pmkid_cand[1]; -+} pmkid_cand_list_t; -+ -+ -+typedef struct wl_led_info { -+ uint32 index; /* led index */ -+ uint32 behavior; -+ bool activehi; -+} wl_led_info_t; -+ -+typedef struct wlc_assoc_info { -+ uint32 req_len; -+ uint32 resp_len; -+ uint32 flags; -+ struct dot11_assoc_req req; -+ struct ether_addr reassoc_bssid; /* used in reassoc's */ -+ struct dot11_assoc_resp resp; -+} wl_assoc_info_t; -+/* flags */ -+#define WLC_ASSOC_REQ_IS_REASSOC 0x01 /* assoc req was actually a reassoc */ -+/* srom read/write struct passed through ioctl */ -+typedef struct { -+ uint byteoff; /* byte offset */ -+ uint nbytes; /* number of bytes */ -+ uint16 buf[1]; -+} srom_rw_t; -+ -+/* R_REG and W_REG struct passed through ioctl */ -+typedef struct { -+ uint32 byteoff; /* byte offset of the field in d11regs_t */ -+ uint32 val; /* read/write value of the field */ -+ uint32 size; /* sizeof the field */ -+ uint band; /* band (optional) */ -+} rw_reg_t; -+ -+/* Structure used by GET/SET_ATTEN ioctls */ -+typedef struct { -+ uint16 auto_ctrl; /* 1: Automatic control, 0: overriden */ -+ uint16 bb; /* Baseband attenuation */ -+ uint16 radio; /* Radio attenuation */ -+ uint16 txctl1; /* Radio TX_CTL1 value */ -+} atten_t; -+ -+/* Used to get specific STA parameters */ -+typedef struct { -+ uint32 val; -+ struct ether_addr ea; -+} scb_val_t; -+ -+ -+/* Event data type */ -+typedef struct wlc_event { -+ wl_event_msg_t event; /* encapsulated event */ -+ struct ether_addr *addr; /* used to keep a trace of the potential present of -+ an address in wlc_event_msg_t */ -+ void *data; /* used to hang additional data on an event */ -+ struct wlc_event *next; /* enables ordered list of pending events */ -+} wlc_event_t; -+ -+#define BCM_MAC_STATUS_INDICATION (0x40010200L) -+ -+typedef struct { -+ uint16 ver; /* version of this struct */ -+ uint16 len; /* length in bytes of this structure */ -+ uint16 cap; /* sta's advertized capabilities */ -+ uint32 flags; /* flags defined below */ -+ uint32 idle; /* time since data pkt rx'd from sta */ -+ struct ether_addr ea; /* Station address */ -+ wl_rateset_t rateset; /* rateset in use */ -+ uint32 in; /* seconds elapsed since associated */ -+ uint32 listen_interval_inms; /* Min Listen interval in ms for this STA*/ -+} sta_info_t; -+ -+#define WL_STA_VER 2 -+ -+/* flags fields */ -+#define WL_STA_BRCM 0x01 -+#define WL_STA_WME 0x02 -+#define WL_STA_ABCAP 0x04 -+#define WL_STA_AUTHE 0x08 -+#define WL_STA_ASSOC 0x10 -+#define WL_STA_AUTHO 0x20 -+#define WL_STA_WDS 0x40 -+#define WL_WDS_LINKUP 0x80 -+ -+ -+/* -+ * Country locale determines which channels are available to us. -+ */ -+typedef enum _wlc_locale { -+ WLC_WW = 0, /* Worldwide */ -+ WLC_THA, /* Thailand */ -+ WLC_ISR, /* Israel */ -+ WLC_JDN, /* Jordan */ -+ WLC_PRC, /* China */ -+ WLC_JPN, /* Japan */ -+ WLC_FCC, /* USA */ -+ WLC_EUR, /* Europe */ -+ WLC_USL, /* US Low Band only */ -+ WLC_JPH, /* Japan High Band only */ -+ WLC_ALL, /* All the channels in this band */ -+ WLC_11D, /* Represents locale recieved by 11d beacons */ -+ WLC_LAST_LOCALE, -+ WLC_UNDEFINED_LOCALE = 0xf -+} wlc_locale_t; -+ -+/* channel encoding */ -+typedef struct channel_info { -+ int hw_channel; -+ int target_channel; -+ int scan_channel; -+} channel_info_t; -+ -+/* For ioctls that take a list of MAC addresses */ -+struct maclist { -+ uint count; /* number of MAC addresses */ -+ struct ether_addr ea[1]; /* variable length array of MAC addresses */ -+}; -+ -+/* get pkt count struct passed through ioctl */ -+typedef struct get_pktcnt { -+ uint rx_good_pkt; -+ uint rx_bad_pkt; -+ uint tx_good_pkt; -+ uint tx_bad_pkt; -+} get_pktcnt_t; -+ -+/* Linux network driver ioctl encoding */ -+typedef struct wl_ioctl { -+ uint cmd; /* common ioctl definition */ -+ void *buf; /* pointer to user buffer */ -+ uint len; /* length of user buffer */ -+ bool set; /* get or set request (optional) */ -+ uint used; /* bytes read or written (optional) */ -+ uint needed; /* bytes needed (optional) */ -+} wl_ioctl_t; -+ -+/* -+ * Structure for passing hardware and software -+ * revision info up from the driver. -+ */ -+typedef struct wlc_rev_info { -+ uint vendorid; /* PCI vendor id */ -+ uint deviceid; /* device id of chip */ -+ uint radiorev; /* radio revision */ -+ uint chiprev; /* chip revision */ -+ uint corerev; /* core revision */ -+ uint boardid; /* board identifier (usu. PCI sub-device id) */ -+ uint boardvendor; /* board vendor (usu. PCI sub-vendor id) */ -+ uint boardrev; /* board revision */ -+ uint driverrev; /* driver version */ -+ uint ucoderev; /* microcode version */ -+ uint bus; /* bus type */ -+ uint chipnum; /* chip number */ -+} wlc_rev_info_t; -+ -+#define WL_BRAND_MAX 10 -+typedef struct wl_instance_info { -+ uint instance; -+ char brand[WL_BRAND_MAX]; -+} wl_instance_info_t; -+ -+/* check this magic number */ -+#define WLC_IOCTL_MAGIC 0x14e46c77 -+ -+/* bump this number if you change the ioctl interface */ -+#define WLC_IOCTL_VERSION 1 -+ -+#define WLC_IOCTL_MAXLEN 8192 /* max length ioctl buffer required */ -+#define WLC_IOCTL_SMLEN 256 /* "small" length ioctl buffer required */ -+ -+/* common ioctl definitions */ -+#define WLC_GET_MAGIC 0 -+#define WLC_GET_VERSION 1 -+#define WLC_UP 2 -+#define WLC_DOWN 3 -+#define WLC_DUMP 6 -+#define WLC_GET_MSGLEVEL 7 -+#define WLC_SET_MSGLEVEL 8 -+#define WLC_GET_PROMISC 9 -+#define WLC_SET_PROMISC 10 -+#define WLC_GET_RATE 12 -+/* #define WLC_SET_RATE 13 */ /* no longer supported */ -+#define WLC_GET_INSTANCE 14 -+/* #define WLC_GET_FRAG 15 */ /* no longer supported */ -+/* #define WLC_SET_FRAG 16 */ /* no longer supported */ -+/* #define WLC_GET_RTS 17 */ /* no longer supported */ -+/* #define WLC_SET_RTS 18 */ /* no longer supported */ -+#define WLC_GET_INFRA 19 -+#define WLC_SET_INFRA 20 -+#define WLC_GET_AUTH 21 -+#define WLC_SET_AUTH 22 -+#define WLC_GET_BSSID 23 -+#define WLC_SET_BSSID 24 -+#define WLC_GET_SSID 25 -+#define WLC_SET_SSID 26 -+#define WLC_RESTART 27 -+#define WLC_GET_CHANNEL 29 -+#define WLC_SET_CHANNEL 30 -+#define WLC_GET_SRL 31 -+#define WLC_SET_SRL 32 -+#define WLC_GET_LRL 33 -+#define WLC_SET_LRL 34 -+#define WLC_GET_PLCPHDR 35 -+#define WLC_SET_PLCPHDR 36 -+#define WLC_GET_RADIO 37 -+#define WLC_SET_RADIO 38 -+#define WLC_GET_PHYTYPE 39 -+/* #define WLC_GET_WEP 42 */ /* no longer supported */ -+/* #define WLC_SET_WEP 43 */ /* no longer supported */ -+#define WLC_GET_KEY 44 -+#define WLC_SET_KEY 45 -+#define WLC_GET_REGULATORY 46 -+#define WLC_SET_REGULATORY 47 -+#define WLC_SCAN 50 -+#define WLC_SCAN_RESULTS 51 -+#define WLC_DISASSOC 52 -+#define WLC_REASSOC 53 -+#define WLC_GET_ROAM_TRIGGER 54 -+#define WLC_SET_ROAM_TRIGGER 55 -+#define WLC_GET_TXANT 61 -+#define WLC_SET_TXANT 62 -+#define WLC_GET_ANTDIV 63 -+#define WLC_SET_ANTDIV 64 -+/* #define WLC_GET_TXPWR 65 */ /* no longer supported */ -+/* #define WLC_SET_TXPWR 66 */ /* no longer supported */ -+#define WLC_GET_CLOSED 67 -+#define WLC_SET_CLOSED 68 -+#define WLC_GET_MACLIST 69 -+#define WLC_SET_MACLIST 70 -+#define WLC_GET_RATESET 71 -+#define WLC_SET_RATESET 72 -+#define WLC_GET_LOCALE 73 -+#define WLC_LONGTRAIN 74 -+#define WLC_GET_BCNPRD 75 -+#define WLC_SET_BCNPRD 76 -+#define WLC_GET_DTIMPRD 77 -+#define WLC_SET_DTIMPRD 78 -+#define WLC_GET_SROM 79 -+#define WLC_SET_SROM 80 -+#define WLC_GET_WEP_RESTRICT 81 -+#define WLC_SET_WEP_RESTRICT 82 -+#define WLC_GET_COUNTRY 83 -+#define WLC_SET_COUNTRY 84 -+#define WLC_GET_REVINFO 98 -+#define WLC_GET_MACMODE 105 -+#define WLC_SET_MACMODE 106 -+#define WLC_GET_GMODE 109 -+#define WLC_SET_GMODE 110 -+#define WLC_GET_CURR_RATESET 114 /* current rateset */ -+#define WLC_GET_SCANSUPPRESS 115 -+#define WLC_SET_SCANSUPPRESS 116 -+#define WLC_GET_AP 117 -+#define WLC_SET_AP 118 -+#define WLC_GET_EAP_RESTRICT 119 -+#define WLC_SET_EAP_RESTRICT 120 -+#define WLC_GET_WDSLIST 123 -+#define WLC_SET_WDSLIST 124 -+#define WLC_GET_RSSI 127 -+#define WLC_GET_WSEC 133 -+#define WLC_SET_WSEC 134 -+#define WLC_GET_BSS_INFO 136 -+#define WLC_GET_LAZYWDS 138 -+#define WLC_SET_LAZYWDS 139 -+#define WLC_GET_BANDLIST 140 -+#define WLC_GET_BAND 141 -+#define WLC_SET_BAND 142 -+#define WLC_GET_SHORTSLOT 144 -+#define WLC_GET_SHORTSLOT_OVERRIDE 145 -+#define WLC_SET_SHORTSLOT_OVERRIDE 146 -+#define WLC_GET_SHORTSLOT_RESTRICT 147 -+#define WLC_SET_SHORTSLOT_RESTRICT 148 -+#define WLC_GET_GMODE_PROTECTION 149 -+#define WLC_GET_GMODE_PROTECTION_OVERRIDE 150 -+#define WLC_SET_GMODE_PROTECTION_OVERRIDE 151 -+#define WLC_UPGRADE 152 -+/* #define WLC_GET_MRATE 153 */ /* no longer supported */ -+/* #define WLC_SET_MRATE 154 */ /* no longer supported */ -+#define WLC_GET_ASSOCLIST 159 -+#define WLC_GET_CLK 160 -+#define WLC_SET_CLK 161 -+#define WLC_GET_UP 162 -+#define WLC_OUT 163 -+#define WLC_GET_WPA_AUTH 164 -+#define WLC_SET_WPA_AUTH 165 -+#define WLC_GET_GMODE_PROTECTION_CONTROL 178 -+#define WLC_SET_GMODE_PROTECTION_CONTROL 179 -+#define WLC_GET_PHYLIST 180 -+#define WLC_GET_KEY_SEQ 183 -+#define WLC_GET_GMODE_PROTECTION_CTS 198 -+#define WLC_SET_GMODE_PROTECTION_CTS 199 -+#define WLC_GET_PIOMODE 203 -+#define WLC_SET_PIOMODE 204 -+#define WLC_SET_LED 209 -+#define WLC_GET_LED 210 -+#define WLC_GET_CHANNEL_SEL 215 -+#define WLC_START_CHANNEL_SEL 216 -+#define WLC_GET_VALID_CHANNELS 217 -+#define WLC_GET_FAKEFRAG 218 -+#define WLC_SET_FAKEFRAG 219 -+#define WLC_GET_WET 230 -+#define WLC_SET_WET 231 -+#define WLC_GET_KEY_PRIMARY 235 -+#define WLC_SET_KEY_PRIMARY 236 -+#define WLC_GET_RADAR 242 -+#define WLC_SET_RADAR 243 -+#define WLC_SET_SPECT_MANAGMENT 244 -+#define WLC_GET_SPECT_MANAGMENT 245 -+#define WLC_WDS_GET_REMOTE_HWADDR 246 /* currently handled in wl_linux.c/wl_vx.c */ -+#define WLC_SET_CS_SCAN_TIMER 248 -+#define WLC_GET_CS_SCAN_TIMER 249 -+#define WLC_SEND_PWR_CONSTRAINT 254 -+#define WLC_CURRENT_PWR 256 -+#define WLC_GET_CHANNELS_IN_COUNTRY 260 -+#define WLC_GET_COUNTRY_LIST 261 -+#define WLC_GET_VAR 262 /* get value of named variable */ -+#define WLC_SET_VAR 263 /* set named variable to value */ -+#define WLC_NVRAM_GET 264 -+#define WLC_NVRAM_SET 265 -+#define WLC_SET_WSEC_PMK 268 -+#define WLC_GET_AUTH_MODE 269 -+#define WLC_SET_AUTH_MODE 270 -+#define WLC_NDCONFIG_ITEM 273 /* currently handled in wl_oid.c */ -+#define WLC_NVOTPW 274 -+/* #define WLC_OTPW 275 */ /* no longer supported */ -+#define WLC_SET_LOCALE 278 -+#define WLC_LAST 279 /* do not change - use get_var/set_var */ -+ -+/* -+ * Minor kludge alert: -+ * Duplicate a few definitions that irelay requires from epiioctl.h here -+ * so caller doesn't have to include this file and epiioctl.h . -+ * If this grows any more, it would be time to move these irelay-specific -+ * definitions out of the epiioctl.h and into a separate driver common file. -+ */ -+#ifndef EPICTRL_COOKIE -+#define EPICTRL_COOKIE 0xABADCEDE -+#endif -+ -+/* vx wlc ioctl's offset */ -+#define CMN_IOCTL_OFF 0x180 -+ -+/* -+ * custom OID support -+ * -+ * 0xFF - implementation specific OID -+ * 0xE4 - first byte of Broadcom PCI vendor ID -+ * 0x14 - second byte of Broadcom PCI vendor ID -+ * 0xXX - the custom OID number -+ */ -+ -+/* begin 0x1f values beyond the start of the ET driver range. */ -+#define WL_OID_BASE 0xFFE41420 -+ -+/* NDIS overrides */ -+#define OID_WL_GETINSTANCE (WL_OID_BASE + WLC_GET_INSTANCE) -+#define OID_WL_NDCONFIG_ITEM (WL_OID_BASE + WLC_NDCONFIG_ITEM) -+ -+#define WL_DECRYPT_STATUS_SUCCESS 1 -+#define WL_DECRYPT_STATUS_FAILURE 2 -+#define WL_DECRYPT_STATUS_UNKNOWN 3 -+ -+/* allows user-mode app to poll the status of USB image upgrade */ -+#define WLC_UPGRADE_SUCCESS 0 -+#define WLC_UPGRADE_PENDING 1 -+ -+#ifdef CONFIG_USBRNDIS_RETAIL -+/* struct passed in for WLC_NDCONFIG_ITEM */ -+typedef struct { -+ char *name; -+ void *param; -+} ndconfig_item_t; -+#endif -+ -+/* Bit masks for radio disabled status - returned by WL_GET_RADIO */ -+#define WL_RADIO_SW_DISABLE (1<<0) -+#define WL_RADIO_HW_DISABLE (1<<1) -+#define WL_RADIO_MPC_DISABLE (1<<2) -+#define WL_RADIO_COUNTRY_DISABLE (1<<3) /* some countries don't support any 802.11 channel */ -+ -+/* Override bit for WLC_SET_TXPWR. if set, ignore other level limits */ -+#define WL_TXPWR_OVERRIDE (1<<31) -+ -+/* "diag" iovar argument and error code */ -+#define WL_DIAG_INTERRUPT 1 /* d11 loopback interrupt test */ -+#define WL_DIAG_MEMORY 3 /* d11 memory test */ -+#define WL_DIAG_LED 4 /* LED test */ -+#define WL_DIAG_REG 5 /* d11/phy register test */ -+#define WL_DIAG_SROM 6 /* srom read/crc test */ -+#define WL_DIAG_DMA 7 /* DMA test */ -+ -+#define WL_DIAGERR_SUCCESS 0 -+#define WL_DIAGERR_FAIL_TO_RUN 1 /* unable to run requested diag */ -+#define WL_DIAGERR_NOT_SUPPORTED 2 /* diag requested is not supported */ -+#define WL_DIAGERR_INTERRUPT_FAIL 3 /* loopback interrupt test failed */ -+#define WL_DIAGERR_LOOPBACK_FAIL 4 /* loopback data test failed */ -+#define WL_DIAGERR_SROM_FAIL 5 /* srom read failed */ -+#define WL_DIAGERR_SROM_BADCRC 6 /* srom crc failed */ -+#define WL_DIAGERR_REG_FAIL 7 /* d11/phy register test failed */ -+#define WL_DIAGERR_MEMORY_FAIL 8 /* d11 memory test failed */ -+#define WL_DIAGERR_NOMEM 9 /* diag test failed due to no memory */ -+#define WL_DIAGERR_DMA_FAIL 10 /* DMA test failed */ -+ -+/* Bus types */ -+#define WL_SB_BUS 0 /* Silicon Backplane */ -+#define WL_PCI_BUS 1 /* PCI target */ -+#define WL_PCMCIA_BUS 2 /* PCMCIA target */ -+ -+/* band types */ -+#define WLC_BAND_AUTO 0 /* auto-select */ -+#define WLC_BAND_A 1 /* "a" band (5 Ghz) */ -+#define WLC_BAND_B 2 /* "b" band (2.4 Ghz) */ -+#define WLC_BAND_ALL 3 /* all bands */ -+ -+/* phy types (returned by WLC_GET_PHYTPE) */ -+#define WLC_PHY_TYPE_A 0 -+#define WLC_PHY_TYPE_B 1 -+#define WLC_PHY_TYPE_G 2 -+#define WLC_PHY_TYPE_NULL 0xf -+ -+/* MAC list modes */ -+#define WLC_MACMODE_DISABLED 0 /* MAC list disabled */ -+#define WLC_MACMODE_DENY 1 /* Deny specified (i.e. allow unspecified) */ -+#define WLC_MACMODE_ALLOW 2 /* Allow specified (i.e. deny unspecified) */ -+ -+/* -+ * -+ */ -+#define GMODE_LEGACY_B 0 -+#define GMODE_AUTO 1 -+#define GMODE_ONLY 2 -+#define GMODE_B_DEFERRED 3 -+#define GMODE_PERFORMANCE 4 -+#define GMODE_LRS 5 -+#define GMODE_MAX 6 -+ -+/* values for PLCPHdr_override */ -+#define WLC_PLCP_AUTO -1 -+#define WLC_PLCP_SHORT 0 -+#define WLC_PLCP_LONG 1 -+ -+/* values for g_protection_override */ -+#define WLC_G_PROTECTION_AUTO -1 -+#define WLC_G_PROTECTION_OFF 0 -+#define WLC_G_PROTECTION_ON 1 -+ -+/* values for g_protection_control */ -+#define WLC_G_PROTECTION_CTL_OFF 0 -+#define WLC_G_PROTECTION_CTL_LOCAL 1 -+#define WLC_G_PROTECTION_CTL_OVERLAP 2 -+ -+/* Values for PM */ -+#define PM_OFF 0 -+#define PM_MAX 1 -+#define PM_FAST 2 -+ -+ -+ -+typedef struct { -+ int npulses; /* required number of pulses at n * t_int */ -+ int ncontig; /* required number of pulses at t_int */ -+ int min_pw; /* minimum pulse width (20 MHz clocks) */ -+ int max_pw; /* maximum pulse width (20 MHz clocks) */ -+ uint16 thresh0; /* Radar detection, thresh 0 */ -+ uint16 thresh1; /* Radar detection, thresh 1 */ -+} wl_radar_args_t; -+ -+/* radar iovar SET defines */ -+#define WL_RADRA_DETECTOR_OFF 0 /* radar dector off */ -+#define WL_RADAR_DETECTOR_ON 1 /* radar detector on */ -+#define WL_RADAR_SIMULATED 2 /* force radar detector to declare detection once */ -+ -+/* dfs_status iovar-related defines */ -+ -+/* cac - channel availability check, -+ * ism - in-service monitoring -+ * csa - channel switching anouncement -+ */ -+ -+/* cac state values */ -+#define WL_DFS_CACSTATE_IDLE 0 /* state for operating in non-radar channel */ -+#define WL_DFS_CACSTATE_PREISM_CAC 1 /* CAC in progress */ -+#define WL_DFS_CACSTATE_ISM 2 /* ISM in progress */ -+#define WL_DFS_CACSTATE_CSA 3 /* csa */ -+#define WL_DFS_CACSTATE_POSTISM_CAC 4 /* ISM CAC */ -+#define WL_DFS_CACSTATE_PREISM_OOC 5 /* PREISM OOC */ -+#define WL_DFS_CACSTATE_POSTISM_OOC 6 /* POSTISM OOC */ -+#define WL_DFS_CACSTATES 7 /* this many states exist */ -+ -+/* data structure used in 'dfs_status' wl interface, which is used to query dfs status */ -+typedef struct { -+ uint state; /* noted by WL_DFS_CACSTATE_XX. */ -+ uint duration; /* time spent in ms in state. */ -+ /* as dfs enters ISM state, it removes the operational channel from quiet channel list -+ * and notes the channel in channel_cleared. set to 0 if no channel is cleared -+ */ -+ uint channel_cleared; -+} wl_dfs_status_t; -+ -+#define NUM_PWRCTRL_RATES 12 -+ -+ -+/* 802.11h enforcement levels */ -+#define SPECT_MNGMT_OFF 0 /* 11h disabled */ -+#define SPECT_MNGMT_LOOSE 1 /* allow scan lists to contain non-11h AP */ -+#define SPECT_MNGMT_STRICT 2 /* prune out non-11h APs from scan list */ -+#define SPECT_MNGMT_11D 3 /* switch to 802.11D mode */ -+ -+#define WL_CHAN_VALID_HW (1 << 0) /* valid with current HW */ -+#define WL_CHAN_VALID_SW (1 << 1) /* valid with current country setting */ -+#define WL_CHAN_BAND_A (1 << 2) /* A-band channel */ -+#define WL_CHAN_RADAR (1 << 3) /* radar sensitive channel */ -+#define WL_CHAN_INACTIVE (1 << 4) /* temporarily out of service due to radar */ -+#define WL_CHAN_RADAR_PASSIVE (1 << 5) /* radar channel is in passive mode */ -+ -+#define WL_MPC_VAL 0x00400000 -+#define WL_APSTA_VAL 0x00800000 -+#define WL_DFS_VAL 0x01000000 -+ -+/* max # of leds supported by GPIO (gpio pin# == led index#) */ -+#define WL_LED_NUMGPIO 16 /* gpio 0-15 */ -+ -+/* led per-pin behaviors */ -+#define WL_LED_OFF 0 /* always off */ -+#define WL_LED_ON 1 /* always on */ -+#define WL_LED_ACTIVITY 2 /* activity */ -+#define WL_LED_RADIO 3 /* radio enabled */ -+#define WL_LED_ARADIO 4 /* 5 Ghz radio enabled */ -+#define WL_LED_BRADIO 5 /* 2.4Ghz radio enabled */ -+#define WL_LED_BGMODE 6 /* on if gmode, off if bmode */ -+#define WL_LED_WI1 7 -+#define WL_LED_WI2 8 -+#define WL_LED_WI3 9 -+#define WL_LED_ASSOC 10 /* associated state indicator */ -+#define WL_LED_INACTIVE 11 /* null behavior (clears default behavior) */ -+#define WL_LED_NUMBEHAVIOR 12 -+ -+/* led behavior numeric value format */ -+#define WL_LED_BEH_MASK 0x7f /* behavior mask */ -+#define WL_LED_AL_MASK 0x80 /* activelow (polarity) bit */ -+ -+ -+/* WDS link local endpoint WPA role */ -+#define WL_WDS_WPA_ROLE_AUTH 0 /* authenticator */ -+#define WL_WDS_WPA_ROLE_SUP 1 /* supplicant */ -+#define WL_WDS_WPA_ROLE_AUTO 255 /* auto, based on mac addr value */ -+ -+/* number of bytes needed to define a 128-bit mask for MAC event reporting */ -+#define WL_EVENTING_MASK_LEN 16 -+ -+/* Structures and constants used for "vndr_ie" IOVar interface */ -+#define VNDR_IE_CMD_LEN 4 /* length of the set command string: "add", "del" (+ NULL) */ -+ -+/* 802.11 Mgmt Packet flags */ -+#define VNDR_IE_BEACON_FLAG 0x1 -+#define VNDR_IE_PRBRSP_FLAG 0x2 -+#define VNDR_IE_ASSOCRSP_FLAG 0x4 -+#define VNDR_IE_AUTHRSP_FLAG 0x8 -+ -+typedef struct { -+ uint32 pktflag; /* bitmask indicating which packet(s) contain this IE */ -+ vndr_ie_t vndr_ie_data; /* vendor IE data */ -+} vndr_ie_info_t; -+ -+typedef struct { -+ int iecount; /* number of entries in the vndr_ie_list[] array */ -+ vndr_ie_info_t vndr_ie_list[1]; /* variable size list of vndr_ie_info_t structs */ -+} vndr_ie_buf_t; -+ -+typedef struct { -+ char cmd[VNDR_IE_CMD_LEN]; /* vndr_ie IOVar set command : "add", "del" + NULL */ -+ vndr_ie_buf_t vndr_ie_buffer; /* buffer containing Vendor IE list information */ -+} vndr_ie_setbuf_t; -+ -+/* join target preference types */ -+#define WL_JOIN_PREF_RSSI 1 /* by RSSI, mandatory */ -+#define WL_JOIN_PREF_WPA 2 /* by akm and ciphers, optional, RSN and WPA as values */ -+#define WL_JOIN_PREF_BAND 3 /* by 802.11 band, optional, WLC_BAND_XXXX as values */ -+ -+/* band preference */ -+#define WLJP_BAND_ASSOC_PREF 255 /* use assoc preference settings */ -+ /* others use WLC_BAND_XXXX as values */ -+ -+/* any multicast cipher suite */ -+#define WL_WPA_ACP_MCS_ANY "\x00\x00\x00\x00" -+ -+#if !defined(__GNUC__) -+#pragma pack(pop) -+#endif -+ -+#define NFIFO 6 /* # tx/rx fifopairs */ -+ -+#define WL_CNT_T_VERSION 1 /* current version of wl_cnt_t struct */ -+ -+typedef struct { -+ uint16 version; /* see definition of WL_CNT_T_VERSION */ -+ uint16 length; /* length of entire structure */ -+ -+ /* transmit stat counters */ -+ uint32 txframe; /* tx data frames */ -+ uint32 txbyte; /* tx data bytes */ -+ uint32 txretrans; /* tx mac retransmits */ -+ uint32 txerror; /* tx data errors */ -+ uint32 txctl; /* tx management frames */ -+ uint32 txprshort; /* tx short preamble frames */ -+ uint32 txserr; /* tx status errors */ -+ uint32 txnobuf; /* tx out of buffers errors */ -+ uint32 txnoassoc; /* tx discard because we're not associated */ -+ uint32 txrunt; /* tx runt frames */ -+ uint32 txchit; /* tx header cache hit (fastpath) */ -+ uint32 txcmiss; /* tx header cache miss (slowpath) */ -+ -+ /* transmit chip error counters */ -+ uint32 txuflo; /* tx fifo underflows */ -+ uint32 txphyerr; /* tx phy errors (indicated in tx status) */ -+ uint32 txphycrs; -+ -+ /* receive stat counters */ -+ uint32 rxframe; /* rx data frames */ -+ uint32 rxbyte; /* rx data bytes */ -+ uint32 rxerror; /* rx data errors */ -+ uint32 rxctl; /* rx management frames */ -+ uint32 rxnobuf; /* rx out of buffers errors */ -+ uint32 rxnondata; /* rx non data frames in the data channel errors */ -+ uint32 rxbadds; /* rx bad DS errors */ -+ uint32 rxbadcm; /* rx bad control or management frames */ -+ uint32 rxfragerr; /* rx fragmentation errors */ -+ uint32 rxrunt; /* rx runt frames */ -+ uint32 rxgiant; /* rx giant frames */ -+ uint32 rxnoscb; /* rx no scb error */ -+ uint32 rxbadproto; /* rx invalid frames */ -+ uint32 rxbadsrcmac; /* rx frames with Invalid Src Mac*/ -+ uint32 rxbadda; /* rx frames tossed for invalid da */ -+ uint32 rxfilter; /* rx frames filtered out */ -+ -+ /* receive chip error counters */ -+ uint32 rxoflo; /* rx fifo overflow errors */ -+ uint32 rxuflo[NFIFO]; /* rx dma descriptor underflow errors */ -+ -+ uint32 d11cnt_txrts_off; /* d11cnt txrts value when reset d11cnt */ -+ uint32 d11cnt_rxcrc_off; /* d11cnt rxcrc value when reset d11cnt */ -+ uint32 d11cnt_txnocts_off; /* d11cnt txnocts value when reset d11cnt */ -+ -+ /* misc counters */ -+ uint32 dmade; /* tx/rx dma descriptor errors */ -+ uint32 dmada; /* tx/rx dma data errors */ -+ uint32 dmape; /* tx/rx dma descriptor protocol errors */ -+ uint32 reset; /* reset count */ -+ uint32 tbtt; /* cnts the TBTT int's */ -+ uint32 txdmawar; -+ -+ /* MAC counters: 32-bit version of d11.h's macstat_t */ -+ uint32 txallfrm; /* total number of frames sent, incl. Data, ACK, RTS, CTS, -+ Control Management (includes retransmissions) */ -+ uint32 txrtsfrm; /* number of RTS sent out by the MAC */ -+ uint32 txctsfrm; /* number of CTS sent out by the MAC */ -+ uint32 txackfrm; /* number of ACK frames sent out */ -+ uint32 txdnlfrm; /* Not used */ -+ uint32 txbcnfrm; /* beacons transmitted */ -+ uint32 txfunfl[8]; /* per-fifo tx underflows */ -+ uint32 txtplunfl; /* Template underflows (mac was too slow to transmit ACK/CTS or BCN) */ -+ uint32 txphyerror; /* Transmit phy error, type of error is reported in tx-status for -+ driver enqueued frames*/ -+ uint32 rxfrmtoolong; /* Received frame longer than legal limit (2346 bytes) */ -+ uint32 rxfrmtooshrt; /* Received frame did not contain enough bytes for its frame type */ -+ uint32 rxinvmachdr; /* Either the protocol version != 0 or frame type not -+ data/control/management*/ -+ uint32 rxbadfcs; /* number of frames for which the CRC check failed in the MAC */ -+ uint32 rxbadplcp; /* parity check of the PLCP header failed */ -+ uint32 rxcrsglitch; /* PHY was able to correlate the preamble but not the header */ -+ uint32 rxstrt; /* Number of received frames with a good PLCP (i.e. passing parity check) */ -+ uint32 rxdfrmucastmbss; /* Number of received DATA frames with good FCS and matching RA */ -+ uint32 rxmfrmucastmbss; /* number of received mgmt frames with good FCS and matching RA */ -+ uint32 rxcfrmucast; /* number of received CNTRL frames with good FCS and matching RA */ -+ uint32 rxrtsucast; /* number of unicast RTS addressed to the MAC (good FCS) */ -+ uint32 rxctsucast; /* number of unicast CTS addressed to the MAC (good FCS)*/ -+ uint32 rxackucast; /* number of ucast ACKS received (good FCS)*/ -+ uint32 rxdfrmocast; /* number of received DATA frames with good FCS and not matching RA */ -+ uint32 rxmfrmocast; /* number of received MGMT frames with good FCS and not matching RA */ -+ uint32 rxcfrmocast; /* number of received CNTRL frame with good FCS and not matching RA */ -+ uint32 rxrtsocast; /* number of received RTS not addressed to the MAC */ -+ uint32 rxctsocast; /* number of received CTS not addressed to the MAC */ -+ uint32 rxdfrmmcast; /* number of RX Data multicast frames received by the MAC */ -+ uint32 rxmfrmmcast; /* number of RX Management multicast frames received by the MAC */ -+ uint32 rxcfrmmcast; /* number of RX Control multicast frames received by the MAC (unlikely -+ to see these) */ -+ uint32 rxbeaconmbss; /* beacons received from member of BSS */ -+ uint32 rxdfrmucastobss; /* number of unicast frames addressed to the MAC from other BSS (WDS FRAME) */ -+ uint32 rxbeaconobss; /* beacons received from other BSS */ -+ uint32 rxrsptmout; /* Number of response timeouts for transmitted frames expecting a -+ response */ -+ uint32 bcntxcancl; /* transmit beacons cancelled due to receipt of beacon (IBSS) */ -+ uint32 rxf0ovfl; /* Number of receive fifo 0 overflows */ -+ uint32 rxf1ovfl; /* Number of receive fifo 1 overflows (obsolete) */ -+ uint32 rxf2ovfl; /* Number of receive fifo 2 overflows (obsolete) */ -+ uint32 txsfovfl; /* Number of transmit status fifo overflows (obsolete) */ -+ uint32 pmqovfl; /* Number of PMQ overflows */ -+ uint32 rxcgprqfrm; /* Number of received Probe requests that made it into the PRQ fifo */ -+ uint32 rxcgprsqovfl; /* Rx Probe Request Que overflow in the AP */ -+ uint32 txcgprsfail; /* Tx Probe Response Fail. AP sent probe response but did not get ACK */ -+ uint32 txcgprssuc; /* Tx Probe Rresponse Success (ACK was received) */ -+ uint32 prs_timeout; /* Number of probe requests that were dropped from the PRQ fifo because -+ a probe response could not be sent out within the time limit defined -+ in M_PRS_MAXTIME */ -+ uint32 rxnack; /* Number of NACKS received (Afterburner) */ -+ uint32 frmscons; /* Number of frames completed without transmission because of an -+ Afterburner re-queue */ -+ uint32 txnack; /* Number of NACKs transmtitted (Afterburner) */ -+ uint32 txglitch_nack; /* obsolete */ -+ uint32 txburst; /* obsolete */ -+ uint32 rxburst; /* obsolete */ -+ -+ /* 802.11 MIB counters, pp. 614 of 802.11 reaff doc. */ -+ uint32 txfrag; /* dot11TransmittedFragmentCount */ -+ uint32 txmulti; /* dot11MulticastTransmittedFrameCount */ -+ uint32 txfail; /* dot11FailedCount */ -+ uint32 txretry; /* dot11RetryCount */ -+ uint32 txretrie; /* dot11MultipleRetryCount */ -+ uint32 rxdup; /* dot11FrameduplicateCount */ -+ uint32 txrts; /* dot11RTSSuccessCount */ -+ uint32 txnocts; /* dot11RTSFailureCount */ -+ uint32 txnoack; /* dot11ACKFailureCount */ -+ uint32 rxfrag; /* dot11ReceivedFragmentCount */ -+ uint32 rxmulti; /* dot11MulticastReceivedFrameCount */ -+ uint32 rxcrc; /* dot11FCSErrorCount */ -+ uint32 txfrmsnt; /* dot11TransmittedFrameCount (bogus MIB?) */ -+ uint32 rxundec; /* dot11WEPUndecryptableCount */ -+ -+ /* WPA2 counters (see rxundec for DecryptFailureCount) */ -+ uint32 tkipmicfaill; /* TKIPLocalMICFailures */ -+ uint32 tkipcntrmsr; /* TKIPCounterMeasuresInvoked */ -+ uint32 tkipreplay; /* TKIPReplays */ -+ uint32 ccmpfmterr; /* CCMPFormatErrors */ -+ uint32 ccmpreplay; /* CCMPReplays */ -+ uint32 ccmpundec; /* CCMPDecryptErrors */ -+ uint32 fourwayfail; /* FourWayHandshakeFailures */ -+ uint32 wepundec; /* dot11WEPUndecryptableCount */ -+ uint32 wepicverr; /* dot11WEPICVErrorCount */ -+ uint32 decsuccess; /* DecryptSuccessCount */ -+ uint32 tkipicverr; /* TKIPICVErrorCount */ -+ uint32 wepexcluded; /* dot11WEPExcludedCount */ -+} wl_cnt_t; -+ -+#endif /* _wlioctl_h_ */ diff -Nur linux-2.4.32/arch/mips/bcm947xx/Makefile linux-2.4.32-brcm/arch/mips/bcm947xx/Makefile --- linux-2.4.32/arch/mips/bcm947xx/Makefile 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.4.32-brcm/arch/mips/bcm947xx/Makefile 2005-12-19 01:56:51.733868750 +0100 @@ -14676,7 +10620,7 @@ diff -Nur linux-2.4.32/drivers/net/Config.in linux-2.4.32-brcm/drivers/net/Confi diff -Nur linux-2.4.32/drivers/net/hnd/bcmsrom.c linux-2.4.32-brcm/drivers/net/hnd/bcmsrom.c --- linux-2.4.32/drivers/net/hnd/bcmsrom.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.4.32-brcm/drivers/net/hnd/bcmsrom.c 2005-12-16 23:39:11.284858000 +0100 -@@ -0,0 +1,936 @@ +@@ -0,0 +1,938 @@ +/* + * Misc useful routines to access NIC SROM/OTP . + * @@ -14701,7 +10645,9 @@ diff -Nur linux-2.4.32/drivers/net/hnd/bcmsrom.c linux-2.4.32-brcm/drivers/net/h +#include +#include + -+#include /* for sprom content groking */ ++struct ether_addr { ++ uint8 octet[6]; ++} PACKED; + +#define VARS_MAX 4096 /* should be reduced */ + @@ -14895,7 +10841,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/bcmsrom.c linux-2.4.32-brcm/drivers/net/h + + case CISTPL_FUNCE: + if (cis[i] == LAN_NID) { -+ ASSERT(cis[i + 1] == ETHER_ADDR_LEN); ++ ASSERT(cis[i + 1] == 6); + bcm_ether_ntoa((uchar*)&cis[i + 2], eabuf); + vp += sprintf(vp, "il0macaddr=%s", eabuf); + vp++; @@ -15414,7 +11360,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/bcmsrom.c linux-2.4.32-brcm/drivers/net/h + ea.octet[3] = b[woff+1] & 0xff; + ea.octet[4] = (b[woff+2] >> 8) & 0xff; + ea.octet[5] = b[woff+2] & 0xff; -+ woff += ETHER_ADDR_LEN/2 ; ++ woff += 3; + bcm_ether_ntoa((uchar*)&ea, eabuf); + vp += sprintf(vp, "il0macaddr=%s", eabuf); + vp++; @@ -15426,7 +11372,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/bcmsrom.c linux-2.4.32-brcm/drivers/net/h + ea.octet[3] = b[woff+1] & 0xff; + ea.octet[4] = (b[woff+2] >> 8) & 0xff; + ea.octet[5] = b[woff+2] & 0xff; -+ woff += ETHER_ADDR_LEN/2 ; ++ woff += 3; + bcm_ether_ntoa((uchar*)&ea, eabuf); + vp += sprintf(vp, "et0macaddr=%s", eabuf); + vp++; @@ -15438,7 +11384,7 @@ diff -Nur linux-2.4.32/drivers/net/hnd/bcmsrom.c linux-2.4.32-brcm/drivers/net/h + ea.octet[3] = b[woff+1] & 0xff; + ea.octet[4] = (b[woff+2] >> 8) & 0xff; + ea.octet[5] = b[woff+2] & 0xff; -+ woff += ETHER_ADDR_LEN/2 ; ++ woff += 3; + bcm_ether_ntoa((uchar*)&ea, eabuf); + vp += sprintf(vp, "et1macaddr=%s", eabuf); + vp++; -- 2.30.2