+++ /dev/null
---[[
-LuCI - Lua Configuration Interface
-
-Copyright 2010 Jo-Philipp Wich <xm@subsignal.org>
-
-Licensed under the Apache License, Version 2.0 (the "License");
-you may not use this file except in compliance with the License.
-You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
-$Id$
-
-]]--
-
-local util = require "luci.util"
-local ip = require "luci.ip"
-
-function write_float(self, section, value)
- local n = tonumber(value)
- if n ~= nil then
- return Value.write(self, section, "%.1f" % n)
- end
-end
-
-m = Map("olsrd", translate("OLSR Daemon - Interface"),
- translate("The OLSR daemon is an implementation of the Optimized Link State Routing protocol. "..
- "As such it allows mesh routing for any network equipment. "..
- "It runs on any wifi card that supports ad-hoc mode and of course on any ethernet device. "..
- "Visit <a href='http://www.olsr.org'>olsrd.org</a> for help and documentation."))
-
-m.redirect = luci.dispatcher.build_url("admin/services/olsrd")
-
-if not arg[1] or m.uci:get("olsrd", arg[1]) ~= "Interface" then
- luci.http.redirect(m.redirect)
- return
-end
-
-i = m:section(NamedSection, arg[1], "Interface", translate("Interface"))
-i.anonymous = true
-i.addremove = false
-
-i:tab("general", translate("General Settings"))
-i:tab("addrs", translate("IP Addresses"))
-i:tab("timing", translate("Timing and Validity"))
-
-ign = i:taboption("general", Flag, "ignore", translate("Enable"),
- translate("Enable this interface."))
-ign.enabled = "0"
-ign.disabled = "1"
-ign.rmempty = false
-function ign.cfgvalue(self, section)
- return Flag.cfgvalue(self, section) or "0"
-end
-
-network = i:taboption("general", Value, "interface", translate("Network"),
- translate("The interface OLSRd should serve."))
-
-network.template = "cbi/network_netlist"
-network.widget = "radio"
-network.nocreate = true
-
-mode = i:taboption("general", ListValue, "Mode", translate("Mode"),
- translate("Interface Mode is used to prevent unnecessary packet forwarding on switched ethernet interfaces. "..
- "valid Modes are \"mesh\" and \"ether\". Default is \"mesh\"."))
-mode:value("mesh")
-mode:value("ether")
-mode.optional = true
-mode.rmempty = true
-
-
-weight = i:taboption("general", Value, "Weight", translate("Weight"),
- translate("When multiple links exist between hosts the weight of interface is used to determine the link to use. "..
- "Normally the weight is automatically calculated by olsrd based on the characteristics of the interface, "..
- "but here you can specify a fixed value. Olsrd will choose links with the lowest value.<br />"..
- "<b>Note:</b> Interface weight is used only when LinkQualityLevel is set to 0. "..
- "For any other value of LinkQualityLevel, the interface ETX value is used instead."))
-weight.optional = true
-weight.datatype = "uinteger"
-weight.placeholder = "0"
-
-lqmult = i:taboption("general", DynamicList, "LinkQualityMult", translate("LinkQuality Multiplicator"),
- translate("Multiply routes with the factor given here. Allowed values are between 0.01 and 1.0. "..
- "It is only used when LQ-Level is greater than 0. Examples:<br />"..
- "reduce LQ to 192.168.0.1 by half: 192.168.0.1 0.5<br />"..
- "reduce LQ to all nodes on this interface by 20%: default 0.8"))
-lqmult.optional = true
-lqmult.rmempty = true
-lqmult.cast = "table"
-lqmult.placeholder = "default 1.0"
-
-function lqmult.validate(self, value)
- for _, v in pairs(value) do
- if v ~= "" then
- local val = util.split(v, " ")
- local host = val[1]
- local mult = val[2]
- if not host or not mult then
- return nil, translate("LQMult requires two values (IP address or 'default' and multiplicator) seperated by space.")
- end
- if not (host == "default" or ip.IPv4(host) or ip.IPv6(host)) then
- return nil, translate("Can only be a valid IPv4 or IPv6 address or 'default'")
- end
- if not tonumber(mult) or tonumber(mult) > 1 or tonumber(mult) < 0.01 then
- return nil, translate("Invalid Value for LQMult-Value. Must be between 0.01 and 1.0.")
- end
- if not mult:match("[0-1]%.[0-9]+") then
- return nil, translate("Invalid Value for LQMult-Value. You must use a decimal number between 0.01 and 1.0 here.")
- end
- end
- end
- return value
-end
-
-ip4b = i:taboption("addrs", Value, "Ip4Broadcast", translate("IPv4 broadcast"),
- translate("IPv4 broadcast address for outgoing OLSR packets. One useful example would be 255.255.255.255. "..
- "Default is \"0.0.0.0\", which triggers the usage of the interface broadcast IP."))
-ip4b.optional = true
-ip4b.datatype = "ip4addr"
-ip4b.placeholder = "0.0.0.0"
-
-ip6m = i:taboption("addrs", Value, "IPv6Multicast", translate("IPv6 multicast"),
- translate("IPv6 multicast address. Default is \"FF02::6D\", the manet-router linklocal multicast."))
-ip6m.optional = true
-ip6m.datatype = "ip6addr"
-ip6m.placeholder = "FF02::6D"
-
-ip4s = i:taboption("addrs", Value, "IPv4Src", translate("IPv4 source"),
- translate("IPv4 src address for outgoing OLSR packages. Default is \"0.0.0.0\", which triggers usage of the interface IP."))
-ip4s.optional = true
-ip4s.datatype = "ip4addr"
-ip4s.placeholder = "0.0.0.0"
-
-ip6s = i:taboption("addrs", Value, "IPv6Src", translate("IPv6 source"),
- translate("IPv6 src prefix. OLSRd will choose one of the interface IPs which matches the prefix of this parameter. "..
- "Default is \"0::/0\", which triggers the usage of a not-linklocal interface IP."))
-ip6s.optional = true
-ip6s.datatype = "ip6addr"
-ip6s.placeholder = "0::/0"
-
-hi = i:taboption("timing", Value, "HelloInterval", translate("Hello interval"))
-hi.optional = true
-hi.datatype = "ufloat"
-hi.placeholder = "5.0"
-hi.write = write_float
-
-hv = i:taboption("timing", Value, "HelloValidityTime", translate("Hello validity time"))
-hv.optional = true
-hv.datatype = "ufloat"
-hv.placeholder = "40.0"
-hv.write = write_float
-
-ti = i:taboption("timing", Value, "TcInterval", translate("TC interval"))
-ti.optional = true
-ti.datatype = "ufloat"
-ti.placeholder = "2.0"
-ti.write = write_float
-
-tv = i:taboption("timing", Value, "TcValidityTime", translate("TC validity time"))
-tv.optional = true
-tv.datatype = "ufloat"
-tv.placeholder = "256.0"
-tv.write = write_float
-
-mi = i:taboption("timing", Value, "MidInterval", translate("MID interval"))
-mi.optional = true
-mi.datatype = "ufloat"
-mi.placeholder = "18.0"
-mi.write = write_float
-
-mv = i:taboption("timing", Value, "MidValidityTime", translate("MID validity time"))
-mv.optional = true
-mv.datatype = "ufloat"
-mv.placeholder = "324.0"
-mv.write = write_float
-
-ai = i:taboption("timing", Value, "HnaInterval", translate("HNA interval"))
-ai.optional = true
-ai.datatype = "ufloat"
-ai.placeholder = "18.0"
-ai.write = write_float
-
-av = i:taboption("timing", Value, "HnaValidityTime", translate("HNA validity time"))
-av.optional = true
-av.datatype = "ufloat"
-av.placeholder = "108.0"
-av.write = write_float
-
-return m
projects / project / luci.git / blobdiff