--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+. /lib/functions/uci-defaults.sh
+. /lib/functions.sh
+. /lib/functions/system.sh
+
+board_config_update
+board=$(board_name)
+
+wg_set_opt_interface() {
+ local device="$1"
+ local offset="$2"
+
+ ucidef_set_interface "$device" device "$device" protocol static ipaddr "10.0.${offset}.1" netmask 255.255.255.0
+}
+
+case "$board" in
+watchguard,firebox-m300)
+ ucidef_set_interfaces_lan_wan "eth1" "eth0"
+ wg_set_opt_interface "eth2" "2"
+
+ sweth_mac_offset=0x186d
+
+ for sweth in /sys/class/net/sweth*; do
+ device="$(basename "$sweth")"
+ mac="$(mtd_get_mac_text wg_cfg0 "$sweth_mac_offset")"
+ switchports="$switchports $device"
+ ucidef_set_network_device_mac "$device" "$mac"
+ wg_set_opt_interface "$device" "${device#sweth}"
+ sweth_mac_offset=$(printf "0x%X\n" $(( $sweth_mac_offset + 0x14)))
+ done
+
+ ;;
+esac
+
+board_config_flush
+
+exit 0
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+PART_NAME=firmware
+REQUIRE_IMAGE_METADATA=1
+
+platform_check_image() {
+ case "$(board_name)" in
+ watchguard,firebox-m300)
+ legacy_sdcard_check_image "$1"
+ ;;
+ *)
+ return 0
+ ;;
+ esac
+}
+
+platform_copy_config() {
+ case "$(board_name)" in
+ watchguard,firebox-m300)
+ legacy_sdcard_copy_config "$1"
+ ;;
+ *)
+ return 0
+ esac
+}
+
+platform_do_upgrade() {
+ case "$(board_name)" in
+ watchguard,firebox-m300)
+ legacy_sdcard_do_upgrade "$1"
+ ;;
+ *)
+ default_do_upgrade "$1"
+ ;;
+ esac
+}
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later
+/*
+ * WatchGuard Firebox M300 Device Tree Source
+ * Based on t2081qds.dts from Linux 5.10
+ *
+ * Copyright 2013 - 2015 Freescale Semiconductor Inc.
+ * Copyright 2020 - 2021 Stijn Tintel <stijn@linux-ipv6.be>
+ */
+
+/include/ "t208xsi-pre.dtsi"
+/include/ "t208xqds.dtsi"
+
+/ {
+ model = "WatchGuard Firebox M300";
+ compatible = "watchguard,firebox-m300", "fsl,T2081QDS";
+
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ /delete-property/ ethernet0;
+ /delete-property/ ethernet1;
+ /delete-property/ ethernet2;
+ /delete-property/ ethernet3;
+ /delete-property/ ethernet4;
+ /delete-property/ ethernet5;
+ /delete-property/ ethernet6;
+ /delete-property/ ethernet7;
+
+ ethernet0 = &enet7;
+ ethernet1 = &enet0;
+ ethernet2 = &enet1;
+ ethernet3 = &enet2;
+ ethernet4 = &enet3;
+ };
+};
+
+&soc {
+// Include first to make this the first interface
+/include/ "qoriq-fman3-0-10g-1.dtsi"
+};
+
+// mdio-mux under &boardctrl + its aliases removed. causes crash:
+// Oops: Machine check, sig: 7 [#1]
+
+/include/ "t2081si-post.dtsi"
+
+// add stuff below the include to make sure we override whatever is there
+
+&enet0 {
+ phy-connection-type = "sgmii";
+ phy-handle = <&phy1>;
+};
+
+&enet1 {
+ phy-connection-type = "sgmii";
+ phy-handle = <&phy2>;
+};
+
+&enet2 {
+ phy-connection-type = "rgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&enet3 {
+ phy-connection-type = "rgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&enet4 {
+ status = "disabled";
+};
+
+&enet5 {
+ status = "disabled";
+};
+
+&enet6 {
+ status = "disabled";
+};
+
+&enet7 {
+ phy-connection-type = "sgmii";
+ phy-handle = <&phy0>;
+};
+
+&ifc {
+ ranges = <0x00 0x00 0x0f 0xefc00000 0x400000>;
+
+ nor@0,0 {
+ reg = <0x00 0x00 0x400000>;
+
+ partition@0{
+ reg = <0x0 0x10000>;
+ label = "qoriq-rcw";
+ read-only;
+ };
+
+ partition@10000 {
+ reg = <0x10000 0x20000>;
+ label = "wg_cfg0";
+ read-only;
+ };
+
+ partition@30000 {
+ reg = <0x30000 0x10000>;
+ label = "wg_cfg1";
+ read-only;
+ };
+
+ partition@40000 {
+ reg = <0x40000 0x10000>;
+ label = "wg_mfg_data";
+ read-only;
+ };
+
+ partition@50000 {
+ reg = <0x50000 0xb0000>;
+ label = "wg_bootopt_data_and_reserved";
+ read-only;
+ };
+
+ partition@100000 {
+ reg = <0x100000 0xb0000>;
+ label = "wg_extra_reserved_1";
+ read-only;
+ };
+
+ partition@1B0000 {
+ reg = <0x1b0000 0xb0000>;
+ label = "wg_extra_reserved_2";
+ read-only;
+ };
+
+ partition@260000 {
+ reg = <0x260000 0xc0000>;
+ label = "wg_u-boot_failsafe";
+ read-only;
+ };
+
+ partition@320000 {
+ reg = <0x320000 0x10000>;
+ label = "qoriq-fman";
+ read-only;
+ };
+
+ partition@330000 {
+ reg = <0x330000 0x10000>;
+ label = "u-boot-env";
+ };
+
+ partition@340000 {
+ reg = <0x340000 0xc0000>;
+ label = "u-boot";
+ read-only;
+ };
+ };
+
+ nand@2,0 {
+ status = "disabled";
+ };
+};
+
+&mdio0 {
+ // m300 ethernet port 0
+ phy0: ethernet-phy@0 {
+ reg = <0x00>;
+ };
+
+ // m300 ethernet port 1
+ phy1: ethernet-phy@1 {
+ reg = <0x01>;
+ };
+
+ phy2: ethernet-phy@2 {
+ reg = <0x02>;
+ };
+
+ phy3: ethernet-phy@3 {
+ reg = <0x03>;
+ };
+
+ switch0: switch@10 {
+ compatible = "marvell,mv88e6085";
+ reg = <0x10>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch0phy0: switch0phy0@0 {
+ reg = <0x00>;
+ interrupt-parent = <&switch0>;
+ };
+
+ switch0phy1: switch0phy1@1 {
+ reg = <0x01>;
+ interrupt-parent = <&switch0>;
+ };
+
+ switch0phy2: switch0phy2@2 {
+ reg = <0x02>;
+ interrupt-parent = <&switch0>;
+ };
+
+ switch0phy3: switch0phy3@3 {
+ reg = <0x03>;
+ interrupt-parent = <&switch0>;
+ };
+
+ switch0phy4: switch0phy4@4 {
+ reg = <0x04>;
+ interrupt-parent = <&switch0>;
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "sweth3";
+ phy-handle = <&switch0phy0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "sweth4";
+ phy-handle = <&switch0phy1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "sweth5";
+ phy-handle = <&switch0phy2>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "sweth6";
+ phy-handle = <&switch0phy3>;
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "sweth7";
+ phy-handle = <&switch0phy4>;
+ };
+
+ // OEM bootlog suggests multiple ports are attached to switch
+ // Keep this until OEM supplies GPL sources
+ port@5 {
+ status = "disabled";
+
+ reg = "<5>";
+ label = "cpu";
+ ethernet = <&enet2>;
+ phy-mode = "rgmii-id";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&enet3>;
+ phy-mode = "rgmii-id";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+};
+
+&soc {
+ i2c@118000 {
+ tpm@29 {
+ compatible = "tpm,tpm_i2c_atmel";
+ reg = <0x29>;
+ };
+ hwmon@2c {
+ compatible = "winbond,w83793";
+ reg = <0x2c>;
+ };
+ hwmon@2d {
+ compatible = "winbond,w83793";
+ reg = <0x2d>;
+ };
+ rtc@32 {
+ compatible = "ricoh,rs5c372a";
+ reg = <0x32>;
+ };
+ pca9547@77 {
+ status = "disabled";
+ };
+ };
+
+ spi@110000 {
+ // DTS decompiled from OEM DTB contains flash@0 but doesn't work
+ // spi-nor spi0.0: unrecognized JEDEC id bytes: ff ff ff ff ff ff
+ // disable for now
+ flash@0 {
+ status = "disabled";
+ };
+
+ flash@1 {
+ status = "disabled";
+ };
+
+ flash@2 {
+ status = "disabled";
+ };
+ };
+};
projects / openwrt / openwrt.git / commitdiff