include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
-DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
-DEVICE_VARS += TPLINK_BOARD_ID
-
-define Build/buffalo-rootfs-cksum
- ( \
- echo -ne "\x$$(od -A n -t u1 $@ | tr -s ' ' '\n' | \
- $(STAGING_DIR_HOST)/bin/awk '{s+=$$0}END{printf "%x", 255-s%256}')"; \
- ) >> $@
-endef
-
-define Build/edimax-header
- $(eval edimax_model=$(word 1,$(1)))
-
- $(STAGING_DIR_HOST)/bin/mkedimaximg \
- -b -s CSYS -m $(edimax_model) \
- -f 0x70000 -S 0x1200000 \
- -i $@ -o $@.new
- @mv $@.new $@
-endef
-
define Device/Default
PROFILES := Default
KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata
endef
-define Device/DniImage
- KERNEL_SUFFIX := -uImage
- KERNEL = kernel-bin | append-dtb | uImage none
- KERNEL_NAME := zImage
- NETGEAR_BOARD_ID :=
- NETGEAR_HW_ID :=
- UBINIZE_OPTS := -E 5
- IMAGES += factory.img
- IMAGE/factory.img := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | netgear-dni
- IMAGE/sysupgrade.bin := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakehdr filesystem | sysupgrade-tar kernel=$$$$@ | append-metadata
-endef
-
-define Device/TpSafeImage
- KERNEL_SUFFIX := -uImage
- KERNEL = kernel-bin | append-dtb | uImage none
- KERNEL_NAME := zImage
- TPLINK_BOARD_ID :=
- IMAGES += factory.bin
- IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
- IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | append-metadata
-endef
-
-define Device/ZyXELImage
- KERNEL_SUFFIX := -uImage
- KERNEL = kernel-bin | append-dtb | uImage none | pad-to $$(KERNEL_SIZE)
- KERNEL_NAME := zImage
- IMAGES += factory.bin
- IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to $$$$(BLOCKSIZE) | zyxel-ras-image separate-kernel
- IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to $$$$(BLOCKSIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
-endef
-
-define Device/askey_rt4230w-rev6
- $(call Device/LegacyImage)
- DEVICE_VENDOR := Askey
- DEVICE_MODEL := RT4230W
- DEVICE_VARIANT := REV6
- SOC := qcom-ipq8065
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
- KERNEL_IN_UBI := 1
-endef
-TARGET_DEVICES += askey_rt4230w-rev6
-
-define Device/asrock_g10
- $(call Device/FitImage)
- $(call Device/UbiFit)
- SOC := qcom-ipq8064
- DEVICE_VENDOR := ASRock
- DEVICE_MODEL := G10
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_SIZE := 5332k
- DEVICE_PACKAGES := kmod-i2c-gpio ath10k-firmware-qca99x0-ct
- IMAGE/nand-factory.bin := append-ubi | edimax-header RN67
-endef
-TARGET_DEVICES += asrock_g10
-
-define Device/buffalo_wxr-2533dhp
- $(call Device/LegacyImage)
- SOC := qcom-ipq8064
- DEVICE_VENDOR := Buffalo
- DEVICE_MODEL := WXR-2533DHP
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- IMAGE_SIZE := 65536k
- KERNEL_IN_UBI := 1
- IMAGE/sysupgrade.bin := append-rootfs | buffalo-rootfs-cksum | \
- sysupgrade-tar rootfs=$$$$@ | append-metadata
- DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
-endef
-TARGET_DEVICES += buffalo_wxr-2533dhp
-
-define Device/compex_wpq864
- $(call Device/FitImage)
- $(call Device/UbiFit)
- DEVICE_VENDOR := Compex
- DEVICE_MODEL := WPQ864
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- SOC := qcom-ipq8064
- DEVICE_PACKAGES := kmod-gpio-beeper
-endef
-TARGET_DEVICES += compex_wpq864
-
-define Device/edgecore_ecw5410
- $(call Device/FitImage)
- $(call Device/UbiFit)
- DEVICE_VENDOR := Edgecore
- DEVICE_MODEL := ECW5410
- SOC := qcom-ipq8068
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- DEVICE_DTS_CONFIG := config@v2.0-ap160
- DEVICE_PACKAGES := ath10k-firmware-qca9984-ct ipq-wifi-edgecore_ecw5410
-endef
-TARGET_DEVICES += edgecore_ecw5410
-
-define Device/linksys_ea7500-v1
- $(call Device/LegacyImage)
- DEVICE_VENDOR := Linksys
- DEVICE_MODEL := EA7500
- DEVICE_VARIANT := v1
- SOC := qcom-ipq8064
- PAGESIZE := 2048
- BLOCKSIZE := 128k
- KERNEL_SIZE := 3072k
- KERNEL = kernel-bin | append-dtb | uImage none | append-uImage-fakehdr filesystem
- UBINIZE_OPTS := -E 5
- IMAGES := factory.bin sysupgrade.bin
- IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | pad-to $$$$(PAGESIZE)
- DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
-endef
-TARGET_DEVICES += linksys_ea7500-v1
-
-define Device/linksys_ea8500
- $(call Device/LegacyImage)
- DEVICE_VENDOR := Linksys
- DEVICE_MODEL := EA8500
- SOC := qcom-ipq8064
- PAGESIZE := 2048
- BLOCKSIZE := 128k
- KERNEL_SIZE := 3072k
- KERNEL = kernel-bin | append-dtb | uImage none | append-uImage-fakehdr filesystem
- BOARD_NAME := ea8500
- SUPPORTED_DEVICES += ea8500
- UBINIZE_OPTS := -E 5
- IMAGES += factory.bin
- IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
- DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
-endef
-TARGET_DEVICES += linksys_ea8500
-
-define Device/meraki_mr42
- $(call Device/FitImage)
- DEVICE_VENDOR := Cisco Meraki
- DEVICE_MODEL := MR42
- SOC := qcom-ipq8068
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_LOADADDR = 0x44208000
- DEVICE_PACKAGES := -swconfig -kmod-ata-ahci -kmod-ata-ahci-platform \
- -kmod-usb-ohci -kmod-usb2 -kmod-usb-ledtrig-usbport \
- -kmod-phy-qcom-ipq806x-usb -kmod-usb3 -kmod-usb-dwc3-qcom \
- -uboot-envtools ath10k-firmware-qca9887-ct \
- ath10k-firmware-qca99x0-ct kmod-eeprom-at24 kmod-hwmon-ina2xx \
- kmod-leds-tlc591xx
-endef
-TARGET_DEVICES += meraki_mr42
-
-define Device/meraki_mr52
- $(call Device/FitImage)
- DEVICE_VENDOR := Cisco Meraki
- DEVICE_MODEL := MR52
- SOC := qcom-ipq8068
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- KERNEL_LOADADDR = 0x44208000
- DEVICE_DTS_CONFIG := config@2
- DEVICE_PACKAGES := -swconfig -kmod-ata-ahci -kmod-ata-ahci-platform \
- -kmod-usb-ohci -kmod-usb2 -kmod-usb-ledtrig-usbport \
- -kmod-phy-qcom-ipq806x-usb -kmod-usb3 -kmod-usb-dwc3-qcom \
- -uboot-envtools ath10k-firmware-qca9887-ct \
- ath10k-firmware-qca9984-ct kmod-eeprom-at24 kmod-hwmon-ina2xx \
- kmod-leds-tlc591xx
-endef
-TARGET_DEVICES += meraki_mr52
-
-define Device/nec_wg2600hp
- $(call Device/LegacyImage)
- DEVICE_VENDOR := NEC
- DEVICE_MODEL := Aterm WG2600HP
- SOC := qcom-ipq8064
- BLOCKSIZE := 64k
- BOARD_NAME := wg2600hp
- IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
- DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
-endef
-TARGET_DEVICES += nec_wg2600hp
-
-define Device/nec_wg2600hp3
- $(call Device/LegacyImage)
- DEVICE_VENDOR := NEC Platforms
- DEVICE_MODEL := Aterm WG2600HP3
- SOC := qcom-ipq8062
- BLOCKSIZE := 64k
- IMAGES := sysupgrade.bin
- IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
- DEVICE_PACKAGES := -kmod-ata-ahci -kmod-ata-ahci-platform -kmod-usb-ohci -kmod-usb2 \
- -kmod-usb-ledtrig-usbport -kmod-usb-phy-qcom-dwc3 -kmod-usb3 -kmod-usb-dwc3-qcom \
- ath10k-firmware-qca9984-ct ipq-wifi-nec_wg2600hp3
-endef
-TARGET_DEVICES += nec_wg2600hp3
-
-define Device/netgear_d7800
- $(call Device/DniImage)
- DEVICE_VENDOR := NETGEAR
- DEVICE_MODEL := Nighthawk X4 D7800
- SOC := qcom-ipq8064
- KERNEL_SIZE := 4096k
- NETGEAR_BOARD_ID := D7800
- NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- BOARD_NAME := d7800
- SUPPORTED_DEVICES += d7800
- DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
-endef
-TARGET_DEVICES += netgear_d7800
-
-define Device/netgear_r7500
- $(call Device/DniImage)
- DEVICE_VENDOR := NETGEAR
- DEVICE_MODEL := Nighthawk X4 R7500
- DEVICE_VARIANT := v1
- SOC := qcom-ipq8064
- KERNEL_SIZE := 4096k
- NETGEAR_BOARD_ID := R7500
- NETGEAR_HW_ID := 29764841+0+128+256+3x3+4x4
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- BOARD_NAME := r7500
- SUPPORTED_DEVICES += r7500
- DEVICE_PACKAGES := ath10k-firmware-qca988x-ct
-endef
-TARGET_DEVICES += netgear_r7500
-
-define Device/netgear_r7500v2
- $(call Device/DniImage)
- DEVICE_VENDOR := NETGEAR
- DEVICE_MODEL := Nighthawk X4 R7500
- DEVICE_VARIANT := v2
- SOC := qcom-ipq8064
- KERNEL_SIZE := 4096k
- NETGEAR_BOARD_ID := R7500v2
- NETGEAR_HW_ID := 29764958+0+128+512+3x3+4x4
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- BOARD_NAME := r7500v2
- SUPPORTED_DEVICES += r7500v2
- DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct ath10k-firmware-qca988x-ct
-endef
-TARGET_DEVICES += netgear_r7500v2
-
-define Device/netgear_r7800
- $(call Device/DniImage)
- DEVICE_VENDOR := NETGEAR
- DEVICE_MODEL := Nighthawk X4S R7800
- SOC := qcom-ipq8065
- KERNEL_SIZE := 4096k
- NETGEAR_BOARD_ID := R7800
- NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4+cascade
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- BOARD_NAME := r7800
- SUPPORTED_DEVICES += r7800
- DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
-endef
-TARGET_DEVICES += netgear_r7800
-
-define Device/netgear_xr500
- $(call Device/DniImage)
- DEVICE_VENDOR := NETGEAR
- DEVICE_MODEL := Nighthawk XR500
- SOC := qcom-ipq8065
- KERNEL_SIZE := 4096k
- NETGEAR_BOARD_ID := XR500
- NETGEAR_HW_ID := 29764958+0+256+512+4x4+4x4+cascade
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
-endef
-TARGET_DEVICES += netgear_xr500
-
-define Device/qcom_ipq8064-ap148
- $(call Device/FitImage)
- $(call Device/UbiFit)
- DEVICE_VENDOR := Qualcomm
- DEVICE_MODEL := AP148
- DEVICE_VARIANT := standard
- SOC := qcom-ipq8064
- DEVICE_DTS := qcom-ipq8064-ap148
- KERNEL_INSTALL := 1
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- BOARD_NAME := ap148
- SUPPORTED_DEVICES += ap148
- DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
-endef
-TARGET_DEVICES += qcom_ipq8064-ap148
-
-define Device/qcom_ipq8064-ap148-legacy
- $(call Device/LegacyImage)
- $(call Device/UbiFit)
- DEVICE_VENDOR := Qualcomm
- DEVICE_MODEL := AP148
- DEVICE_VARIANT := legacy
- SOC := qcom-ipq8064
- DEVICE_DTS := qcom-ipq8064-ap148
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- BOARD_NAME := ap148
- SUPPORTED_DEVICES := qcom,ipq8064-ap148 ap148
- DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
-endef
-TARGET_DEVICES += qcom_ipq8064-ap148-legacy
-
-define Device/qcom_ipq8064-ap161
- $(call Device/FitImage)
- $(call Device/UbiFit)
- DEVICE_VENDOR := Qualcomm
- DEVICE_MODEL := AP161
- SOC := qcom-ipq8064
- DEVICE_DTS := qcom-ipq8064-ap161
- KERNEL_INSTALL := 1
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- BOARD_NAME := ap161
- DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
-endef
-TARGET_DEVICES += qcom_ipq8064-ap161
-
-define Device/qcom_ipq8064-db149
- $(call Device/FitImage)
- DEVICE_VENDOR := Qualcomm
- DEVICE_MODEL := DB149
- SOC := qcom-ipq8064
- DEVICE_DTS := qcom-ipq8064-db149
- KERNEL_INSTALL := 1
- BOARD_NAME := db149
- DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
-endef
-TARGET_DEVICES += qcom_ipq8064-db149
-
-define Device/tplink_ad7200
- $(call Device/TpSafeImage)
- DEVICE_VENDOR := TP-Link
- DEVICE_MODEL := AD7200
- DEVICE_VARIANT := v1/v2
- DEVICE_ALT0_VENDOR := TP-Link
- DEVICE_ALT0_MODEL := Talon AD7200
- DEVICE_ALT0_VARIANT := v1/v2
- SOC := qcom-ipq8064
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- TPLINK_BOARD_ID := AD7200
- DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct kmod-wil6210
-endef
-TARGET_DEVICES += tplink_ad7200
-
-define Device/tplink_c2600
- $(call Device/TpSafeImage)
- DEVICE_VENDOR := TP-Link
- DEVICE_MODEL := Archer C2600
- DEVICE_VARIANT := v1
- SOC := qcom-ipq8064
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- BOARD_NAME := c2600
- SUPPORTED_DEVICES += c2600
- TPLINK_BOARD_ID := C2600
- DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
-endef
-TARGET_DEVICES += tplink_c2600
-
-define Device/tplink_vr2600v
- DEVICE_VENDOR := TP-Link
- DEVICE_MODEL := Archer VR2600v
- DEVICE_VARIANT := v1
- KERNEL_SUFFIX := -uImage
- KERNEL = kernel-bin | append-dtb | uImage none
- KERNEL_NAME := zImage
- KERNEL_SIZE := 3072k
- SOC := qcom-ipq8064
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- BOARD_NAME := vr2600v
- SUPPORTED_DEVICES += vr2600v
- DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
- IMAGE/sysupgrade.bin := pad-extra 512 | append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
-endef
-TARGET_DEVICES += tplink_vr2600v
-
-define Device/ubnt_unifi-ac-hd
- $(call Device/FitImageLzma)
- DEVICE_VENDOR := Ubiquiti
- DEVICE_MODEL := UniFi AC HD
- SOC := qcom-ipq8064
- BLOCKSIZE := 64k
- IMAGE_SIZE := 14784k
- DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata
-endef
-TARGET_DEVICES += ubnt_unifi-ac-hd
-
-define Device/zyxel_nbg6817
- DEVICE_VENDOR := ZyXEL
- DEVICE_MODEL := NBG6817
- SOC := qcom-ipq8065
- KERNEL_SIZE := 4096k
- BLOCKSIZE := 64k
- BOARD_NAME := nbg6817
- RAS_BOARD := NBG6817
- RAS_ROOTFS_SIZE := 20934k
- RAS_VERSION := "V1.99(OWRT.9999)C0"
- SUPPORTED_DEVICES += nbg6817
- DEVICE_PACKAGES := ath10k-firmware-qca9984-ct e2fsprogs kmod-fs-ext4 losetup
- $(call Device/ZyXELImage)
-endef
-TARGET_DEVICES += zyxel_nbg6817
+include $(SUBTARGET).mk
$(eval $(call BuildImage))
--- /dev/null
+DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
+DEVICE_VARS += TPLINK_BOARD_ID
+
+define Build/buffalo-rootfs-cksum
+ ( \
+ echo -ne "\x$$(od -A n -t u1 $@ | tr -s ' ' '\n' | \
+ $(STAGING_DIR_HOST)/bin/awk '{s+=$$0}END{printf "%x", 255-s%256}')"; \
+ ) >> $@
+endef
+
+define Build/edimax-header
+ $(eval edimax_model=$(word 1,$(1)))
+
+ $(STAGING_DIR_HOST)/bin/mkedimaximg \
+ -b -s CSYS -m $(edimax_model) \
+ -f 0x70000 -S 0x1200000 \
+ -i $@ -o $@.new
+ @mv $@.new $@
+endef
+
+define Device/DniImage
+ KERNEL_SUFFIX := -uImage
+ KERNEL = kernel-bin | append-dtb | uImage none
+ KERNEL_NAME := zImage
+ NETGEAR_BOARD_ID :=
+ NETGEAR_HW_ID :=
+ UBINIZE_OPTS := -E 5
+ IMAGES += factory.img
+ IMAGE/factory.img := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | netgear-dni
+ IMAGE/sysupgrade.bin := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakehdr filesystem | sysupgrade-tar kernel=$$$$@ | append-metadata
+endef
+
+define Device/TpSafeImage
+ KERNEL_SUFFIX := -uImage
+ KERNEL = kernel-bin | append-dtb | uImage none
+ KERNEL_NAME := zImage
+ TPLINK_BOARD_ID :=
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
+ IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | append-metadata
+endef
+
+define Device/ZyXELImage
+ KERNEL_SUFFIX := -uImage
+ KERNEL = kernel-bin | append-dtb | uImage none | pad-to $$(KERNEL_SIZE)
+ KERNEL_NAME := zImage
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to $$$$(BLOCKSIZE) | zyxel-ras-image separate-kernel
+ IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to $$$$(BLOCKSIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
+endef
+
+define Device/askey_rt4230w-rev6
+ $(call Device/LegacyImage)
+ DEVICE_VENDOR := Askey
+ DEVICE_MODEL := RT4230W
+ DEVICE_VARIANT := REV6
+ SOC := qcom-ipq8065
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
+ KERNEL_IN_UBI := 1
+endef
+TARGET_DEVICES += askey_rt4230w-rev6
+
+define Device/asrock_g10
+ $(call Device/FitImage)
+ $(call Device/UbiFit)
+ SOC := qcom-ipq8064
+ DEVICE_VENDOR := ASRock
+ DEVICE_MODEL := G10
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_SIZE := 5332k
+ DEVICE_PACKAGES := kmod-i2c-gpio ath10k-firmware-qca99x0-ct
+ IMAGE/nand-factory.bin := append-ubi | edimax-header RN67
+endef
+TARGET_DEVICES += asrock_g10
+
+define Device/buffalo_wxr-2533dhp
+ $(call Device/LegacyImage)
+ SOC := qcom-ipq8064
+ DEVICE_VENDOR := Buffalo
+ DEVICE_MODEL := WXR-2533DHP
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ IMAGE_SIZE := 65536k
+ KERNEL_IN_UBI := 1
+ IMAGE/sysupgrade.bin := append-rootfs | buffalo-rootfs-cksum | \
+ sysupgrade-tar rootfs=$$$$@ | append-metadata
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
+endef
+TARGET_DEVICES += buffalo_wxr-2533dhp
+
+define Device/compex_wpq864
+ $(call Device/FitImage)
+ $(call Device/UbiFit)
+ DEVICE_VENDOR := Compex
+ DEVICE_MODEL := WPQ864
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ SOC := qcom-ipq8064
+ DEVICE_PACKAGES := kmod-gpio-beeper
+endef
+TARGET_DEVICES += compex_wpq864
+
+define Device/edgecore_ecw5410
+ $(call Device/FitImage)
+ $(call Device/UbiFit)
+ DEVICE_VENDOR := Edgecore
+ DEVICE_MODEL := ECW5410
+ SOC := qcom-ipq8068
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ DEVICE_DTS_CONFIG := config@v2.0-ap160
+ DEVICE_PACKAGES := ath10k-firmware-qca9984-ct ipq-wifi-edgecore_ecw5410
+endef
+TARGET_DEVICES += edgecore_ecw5410
+
+define Device/linksys_ea7500-v1
+ $(call Device/LegacyImage)
+ DEVICE_VENDOR := Linksys
+ DEVICE_MODEL := EA7500
+ DEVICE_VARIANT := v1
+ SOC := qcom-ipq8064
+ PAGESIZE := 2048
+ BLOCKSIZE := 128k
+ KERNEL_SIZE := 3072k
+ KERNEL = kernel-bin | append-dtb | uImage none | append-uImage-fakehdr filesystem
+ UBINIZE_OPTS := -E 5
+ IMAGES := factory.bin sysupgrade.bin
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | pad-to $$$$(PAGESIZE)
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
+endef
+TARGET_DEVICES += linksys_ea7500-v1
+
+define Device/linksys_ea8500
+ $(call Device/LegacyImage)
+ DEVICE_VENDOR := Linksys
+ DEVICE_MODEL := EA8500
+ SOC := qcom-ipq8064
+ PAGESIZE := 2048
+ BLOCKSIZE := 128k
+ KERNEL_SIZE := 3072k
+ KERNEL = kernel-bin | append-dtb | uImage none | append-uImage-fakehdr filesystem
+ BOARD_NAME := ea8500
+ SUPPORTED_DEVICES += ea8500
+ UBINIZE_OPTS := -E 5
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
+endef
+TARGET_DEVICES += linksys_ea8500
+
+define Device/meraki_mr42
+ $(call Device/FitImage)
+ DEVICE_VENDOR := Cisco Meraki
+ DEVICE_MODEL := MR42
+ SOC := qcom-ipq8068
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_LOADADDR = 0x44208000
+ DEVICE_PACKAGES := -swconfig -kmod-ata-ahci -kmod-ata-ahci-platform \
+ -kmod-usb-ohci -kmod-usb2 -kmod-usb-ledtrig-usbport \
+ -kmod-phy-qcom-ipq806x-usb -kmod-usb3 -kmod-usb-dwc3-qcom \
+ -uboot-envtools ath10k-firmware-qca9887-ct \
+ ath10k-firmware-qca99x0-ct kmod-eeprom-at24 kmod-hwmon-ina2xx \
+ kmod-leds-tlc591xx
+endef
+TARGET_DEVICES += meraki_mr42
+
+define Device/meraki_mr52
+ $(call Device/FitImage)
+ DEVICE_VENDOR := Cisco Meraki
+ DEVICE_MODEL := MR52
+ SOC := qcom-ipq8068
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_LOADADDR = 0x44208000
+ DEVICE_DTS_CONFIG := config@2
+ DEVICE_PACKAGES := -swconfig -kmod-ata-ahci -kmod-ata-ahci-platform \
+ -kmod-usb-ohci -kmod-usb2 -kmod-usb-ledtrig-usbport \
+ -kmod-phy-qcom-ipq806x-usb -kmod-usb3 -kmod-usb-dwc3-qcom \
+ -uboot-envtools ath10k-firmware-qca9887-ct \
+ ath10k-firmware-qca9984-ct kmod-eeprom-at24 kmod-hwmon-ina2xx \
+ kmod-leds-tlc591xx
+endef
+TARGET_DEVICES += meraki_mr52
+
+define Device/nec_wg2600hp
+ $(call Device/LegacyImage)
+ DEVICE_VENDOR := NEC
+ DEVICE_MODEL := Aterm WG2600HP
+ SOC := qcom-ipq8064
+ BLOCKSIZE := 64k
+ BOARD_NAME := wg2600hp
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
+endef
+TARGET_DEVICES += nec_wg2600hp
+
+define Device/nec_wg2600hp3
+ $(call Device/LegacyImage)
+ DEVICE_VENDOR := NEC Platforms
+ DEVICE_MODEL := Aterm WG2600HP3
+ SOC := qcom-ipq8062
+ BLOCKSIZE := 64k
+ IMAGES := sysupgrade.bin
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+ DEVICE_PACKAGES := -kmod-ata-ahci -kmod-ata-ahci-platform -kmod-usb-ohci -kmod-usb2 \
+ -kmod-usb-ledtrig-usbport -kmod-usb-phy-qcom-dwc3 -kmod-usb3 -kmod-usb-dwc3-qcom \
+ ath10k-firmware-qca9984-ct ipq-wifi-nec_wg2600hp3
+endef
+TARGET_DEVICES += nec_wg2600hp3
+
+define Device/netgear_d7800
+ $(call Device/DniImage)
+ DEVICE_VENDOR := NETGEAR
+ DEVICE_MODEL := Nighthawk X4 D7800
+ SOC := qcom-ipq8064
+ KERNEL_SIZE := 4096k
+ NETGEAR_BOARD_ID := D7800
+ NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ BOARD_NAME := d7800
+ SUPPORTED_DEVICES += d7800
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
+endef
+TARGET_DEVICES += netgear_d7800
+
+define Device/netgear_r7500
+ $(call Device/DniImage)
+ DEVICE_VENDOR := NETGEAR
+ DEVICE_MODEL := Nighthawk X4 R7500
+ DEVICE_VARIANT := v1
+ SOC := qcom-ipq8064
+ KERNEL_SIZE := 4096k
+ NETGEAR_BOARD_ID := R7500
+ NETGEAR_HW_ID := 29764841+0+128+256+3x3+4x4
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ BOARD_NAME := r7500
+ SUPPORTED_DEVICES += r7500
+ DEVICE_PACKAGES := ath10k-firmware-qca988x-ct
+endef
+TARGET_DEVICES += netgear_r7500
+
+define Device/netgear_r7500v2
+ $(call Device/DniImage)
+ DEVICE_VENDOR := NETGEAR
+ DEVICE_MODEL := Nighthawk X4 R7500
+ DEVICE_VARIANT := v2
+ SOC := qcom-ipq8064
+ KERNEL_SIZE := 4096k
+ NETGEAR_BOARD_ID := R7500v2
+ NETGEAR_HW_ID := 29764958+0+128+512+3x3+4x4
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ BOARD_NAME := r7500v2
+ SUPPORTED_DEVICES += r7500v2
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct ath10k-firmware-qca988x-ct
+endef
+TARGET_DEVICES += netgear_r7500v2
+
+define Device/netgear_r7800
+ $(call Device/DniImage)
+ DEVICE_VENDOR := NETGEAR
+ DEVICE_MODEL := Nighthawk X4S R7800
+ SOC := qcom-ipq8065
+ KERNEL_SIZE := 4096k
+ NETGEAR_BOARD_ID := R7800
+ NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4+cascade
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ BOARD_NAME := r7800
+ SUPPORTED_DEVICES += r7800
+ DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
+endef
+TARGET_DEVICES += netgear_r7800
+
+define Device/netgear_xr500
+ $(call Device/DniImage)
+ DEVICE_VENDOR := NETGEAR
+ DEVICE_MODEL := Nighthawk XR500
+ SOC := qcom-ipq8065
+ KERNEL_SIZE := 4096k
+ NETGEAR_BOARD_ID := XR500
+ NETGEAR_HW_ID := 29764958+0+256+512+4x4+4x4+cascade
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
+endef
+TARGET_DEVICES += netgear_xr500
+
+define Device/qcom_ipq8064-ap148
+ $(call Device/FitImage)
+ $(call Device/UbiFit)
+ DEVICE_VENDOR := Qualcomm
+ DEVICE_MODEL := AP148
+ DEVICE_VARIANT := standard
+ SOC := qcom-ipq8064
+ DEVICE_DTS := qcom-ipq8064-ap148
+ KERNEL_INSTALL := 1
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ BOARD_NAME := ap148
+ SUPPORTED_DEVICES += ap148
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
+endef
+TARGET_DEVICES += qcom_ipq8064-ap148
+
+define Device/qcom_ipq8064-ap148-legacy
+ $(call Device/LegacyImage)
+ $(call Device/UbiFit)
+ DEVICE_VENDOR := Qualcomm
+ DEVICE_MODEL := AP148
+ DEVICE_VARIANT := legacy
+ SOC := qcom-ipq8064
+ DEVICE_DTS := qcom-ipq8064-ap148
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ BOARD_NAME := ap148
+ SUPPORTED_DEVICES := qcom,ipq8064-ap148 ap148
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
+endef
+TARGET_DEVICES += qcom_ipq8064-ap148-legacy
+
+define Device/qcom_ipq8064-ap161
+ $(call Device/FitImage)
+ $(call Device/UbiFit)
+ DEVICE_VENDOR := Qualcomm
+ DEVICE_MODEL := AP161
+ SOC := qcom-ipq8064
+ DEVICE_DTS := qcom-ipq8064-ap161
+ KERNEL_INSTALL := 1
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ BOARD_NAME := ap161
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
+endef
+TARGET_DEVICES += qcom_ipq8064-ap161
+
+define Device/qcom_ipq8064-db149
+ $(call Device/FitImage)
+ DEVICE_VENDOR := Qualcomm
+ DEVICE_MODEL := DB149
+ SOC := qcom-ipq8064
+ DEVICE_DTS := qcom-ipq8064-db149
+ KERNEL_INSTALL := 1
+ BOARD_NAME := db149
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
+endef
+TARGET_DEVICES += qcom_ipq8064-db149
+
+define Device/tplink_ad7200
+ $(call Device/TpSafeImage)
+ DEVICE_VENDOR := TP-Link
+ DEVICE_MODEL := AD7200
+ DEVICE_VARIANT := v1/v2
+ DEVICE_ALT0_VENDOR := TP-Link
+ DEVICE_ALT0_MODEL := Talon AD7200
+ DEVICE_ALT0_VARIANT := v1/v2
+ SOC := qcom-ipq8064
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ TPLINK_BOARD_ID := AD7200
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct kmod-wil6210
+endef
+TARGET_DEVICES += tplink_ad7200
+
+define Device/tplink_c2600
+ $(call Device/TpSafeImage)
+ DEVICE_VENDOR := TP-Link
+ DEVICE_MODEL := Archer C2600
+ DEVICE_VARIANT := v1
+ SOC := qcom-ipq8064
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ BOARD_NAME := c2600
+ SUPPORTED_DEVICES += c2600
+ TPLINK_BOARD_ID := C2600
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
+endef
+TARGET_DEVICES += tplink_c2600
+
+define Device/tplink_vr2600v
+ DEVICE_VENDOR := TP-Link
+ DEVICE_MODEL := Archer VR2600v
+ DEVICE_VARIANT := v1
+ KERNEL_SUFFIX := -uImage
+ KERNEL = kernel-bin | append-dtb | uImage none
+ KERNEL_NAME := zImage
+ KERNEL_SIZE := 3072k
+ SOC := qcom-ipq8064
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ BOARD_NAME := vr2600v
+ SUPPORTED_DEVICES += vr2600v
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
+ IMAGE/sysupgrade.bin := pad-extra 512 | append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
+endef
+TARGET_DEVICES += tplink_vr2600v
+
+define Device/ubnt_unifi-ac-hd
+ $(call Device/FitImageLzma)
+ DEVICE_VENDOR := Ubiquiti
+ DEVICE_MODEL := UniFi AC HD
+ SOC := qcom-ipq8064
+ BLOCKSIZE := 64k
+ IMAGE_SIZE := 14784k
+ DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata
+endef
+TARGET_DEVICES += ubnt_unifi-ac-hd
+
+define Device/zyxel_nbg6817
+ DEVICE_VENDOR := ZyXEL
+ DEVICE_MODEL := NBG6817
+ SOC := qcom-ipq8065
+ KERNEL_SIZE := 4096k
+ BLOCKSIZE := 64k
+ BOARD_NAME := nbg6817
+ RAS_BOARD := NBG6817
+ RAS_ROOTFS_SIZE := 20934k
+ RAS_VERSION := "V1.99(OWRT.9999)C0"
+ SUPPORTED_DEVICES += nbg6817
+ DEVICE_PACKAGES := ath10k-firmware-qca9984-ct e2fsprogs kmod-fs-ext4 losetup
+ $(call Device/ZyXELImage)
+endef
+TARGET_DEVICES += zyxel_nbg6817
projects / openwrt / openwrt.git / commitdiff