MTS WG430223 is a wireless AC1300 (WiFi 5) router manufactured by
Arcadyan company. It's very similar to Beeline Smartbox Flash (Arcadyan
WG443223).
Device specification
--------------------
SoC Type: MediaTek MT7621AT
RAM: 128 MiB
Flash: 128 MiB (Winbond W29N01HV)
Wireless 2.4 GHz (MT7615DN): b/g/n, 2x2
Wireless 5 GHz (MT7615DN): a/n/ac, 2x2
Ethernet: 3xGbE (WAN, LAN1, LAN2)
USB ports: No
Button: 1 (Reset/WPS)
LEDs: 2 (Red, Green)
Power: 12 VDC, 1 A
Connector type: Barrel
Bootloader: U-Boot (Ralink UBoot Version: 5.0.0.2)
OEM: Arcadyan WG430223
Installation
------------
1. Login to the router web interface (superadmin:serial number)
2. Navigate to Administration -> Miscellaneous -> Access control lists &
enable telnet & enable "Remote control from any IP address"
3. Connect to the router using telnet (default admin:admin)
4. Place *factory.trx on any web server (192.168.1.2 in this example)
5. Connect to the router using telnet shell (no password required)
6. Save MAC adresses to U-Boot environment:
uboot_env --set --name eth2macaddr --value $(ifconfig | grep eth2 | \
awk '{print $5}')
uboot_env --set --name eth3macaddr --value $(ifconfig | grep eth3 | \
awk '{print $5}')
uboot_env --set --name ra0macaddr --value $(ifconfig | grep ra0 | \
awk '{print $5}')
uboot_env --set --name rax0macaddr --value $(ifconfig | grep rax0 | \
awk '{print $5}')
7. Ensure that MACs were saved correctly:
uboot_env --get --name eth2macaddr
uboot_env --get --name eth3macaddr
uboot_env --get --name ra0macaddr
uboot_env --get --name rax0macaddr
8. Download and write the OpenWrt images:
cd /tmp
wget http://192.168.1.2/factory.trx
mtd_write erase /dev/mtd4
mtd_write write factory.trx /dev/mtd4
9. Set 1st boot partition and reboot:
uboot_env --set --name bootpartition --value 0
Back to Stock
-------------
1. Run in the OpenWrt shell:
fw_setenv bootpartition 1
reboot
2. Optional step. Upgrade the stock firmware with any version to
overwrite the OpenWrt in Slot 1.
MAC addresses
-------------
+-----------+-------------------+----------------+
| Interface | MAC | Source |
+-----------+-------------------+----------------+
| label | A4:xx:xx:51:xx:F4 | No MACs was |
| LAN | A4:xx:xx:51:xx:F6 | found on Flash |
| WAN | A4:xx:xx:51:xx:F4 | [1] |
| WLAN_2g | A4:xx:xx:51:xx:F5 | |
| WLAN_5g | A6:xx:xx:21:xx:F5 | |
+-----------+-------------------+----------------+
[1]:
a. Label wasb't found neither in factory nor in other places.
b. MAC addresses are stored in encrypted partition "glbcfg". Encryption
key hasn't known yet. To ensure the correct MACs in OpenWrt, a hack
with saving of the MACs to u-boot-env during the installation was
applied.
c. Default Ralink ethernet MAC address (00:0C:43:28:80:A0) was found in
"Factory" 0xfff0. It's the same for all MTS WG430223 devices. OEM
firmware also uses this MAC when initialazes ethernet driver. In
OpenWrt we use it only as internal GMAC (eth0), all other MACs are
unique. Therefore, there is no any barriers to the operation of several
MTS WG430223 devices even within the same broadcast domain.
Stock firmware image format
---------------------------
The same as Beeline Smartbox Flash but with another trx magic
+--------------+---------------+----------------------------------------+
| Offset | | Description |
+==============+===============+========================================+
| 0x0 | 31 52 48 53 | TRX magic "1RHS" |
+--------------+---------------+----------------------------------------+
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
linksys,ea7500-v2|\
linksys,ea8100-v1|\
linksys,ea8100-v2|\
+mts,wg430223|\
xiaomi,mi-router-3g|\
xiaomi,mi-router-3-pro|\
xiaomi,mi-router-4|\
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621_arcadyan_wg4xx223.dtsi"
+
+/ {
+ compatible = "mts,wg430223", "mediatek,mt7621-soc";
+ model = "MTS WG430223";
+};
endef
TARGET_DEVICES += mtc_wr1201
+define Device/mts_wg430223
+ $(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
+ DEVICE_VENDOR := MTS
+ DEVICE_MODEL := WG430223
+ IMAGE_SIZE := 32768k
+ KERNEL_SIZE := 4352k
+ UBINIZE_OPTS := -E 5
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | \
+ uImage none | arcadyan-trx 0x53485231 | pad-to $$(KERNEL_SIZE)
+ KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-kernel | \
+ uImage none
+ IMAGES += factory.trx
+ IMAGE/factory.trx := append-kernel | append-ubi | check-size
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware uboot-envtools
+endef
+TARGET_DEVICES += mts_wg430223
+
define Device/netgear_ex6150
$(Device/dsa-migration)
DEVICE_VENDOR := NETGEAR
jcg,q20|\
lenovo,newifi-d1|\
mikrotik,routerboard-m33g|\
+ mts,wg430223|\
oraybox,x3a|\
renkforce,ws-wn530hp3-a|\
xiaomi,mi-router-3g|\
wan_mac=$(mtd_get_mac_ascii u-boot-env et1macaddr)
label_mac=$(mtd_get_mac_binary factory 0x4)
;;
- beeline,smartbox-flash)
+ beeline,smartbox-flash|\
+ mts,wg430223)
lan_mac=$(mtd_get_mac_ascii u-boot-env eth2macaddr)
wan_mac=$(mtd_get_mac_ascii u-boot-env eth3macaddr)
label_mac=$lan_mac
board=$(board_name)
case "$board" in
- beeline,smartbox-flash)
+ beeline,smartbox-flash|\
+ mts,wg430223)
hw_mac_addr_ra0="$(mtd_get_mac_ascii u-boot-env ra0macaddr)"
hw_mac_addr_rax0="$(mtd_get_mac_ascii u-boot-env rax0macaddr)"
[ "$PHYNBR" = "0" ] && echo -n $hw_mac_addr_ra0 > /sys${DEVPATH}/macaddress
linksys,ea7500-v2|\
linksys,ea8100-v1|\
linksys,ea8100-v2|\
+ mts,wg430223|\
netgear,r6220|\
netgear,r6260|\
netgear,r6350|\
projects / openwrt / openwrt.git / commitdiff