1 Intel Stratix 10 SoCFPGA
2 ========================
4 Stratix 10 SoCFPGA is a FPGA with integrated quad-core 64-bit Arm Cortex A53 processor.
6 Upon boot, Boot ROM loads bl2 into OCRAM. Bl2 subsequently initializes
7 the hardware, then loads bl31 and bl33 (UEFI) into DDR and boots to bl33.
11 Boot ROM --> Trusted Firmware-A --> UEFI
20 `link <https://github.com/ARM-software/arm-trusted-firmware>`__
22 - UEFI (to be updated with new upstreamed UEFI):
23 `link <https://github.com/altera-opensource/uefi-socfpga>`__
28 - Fetch all the above 2 repositories into local host.
29 Make all the repositories in the same ${BUILD\_PATH}.
31 - Prepare the AARCH64 toolchain.
33 - Build UEFI using Stratix 10 platform as configuration
34 This will be updated to use an updated UEFI using the latest EDK2 source
38 make CROSS_COMPILE=aarch64-linux-gnu- device=s10
40 - Build atf providing the previously generated UEFI as the BL33 image
44 make CROSS_COMPILE=aarch64-linux-gnu- bl2 fip PLAT=stratix10
50 - dd fip.bin to a A2 partition on the MMC drive to be booted in Stratix 10
53 - Generate a SOF containing bl2
57 aarch64-linux-gnu-objcopy -I binary -O ihex --change-addresses 0xffe00000 bl2.bin bl2.hex
58 quartus_cpf --bootloader bl2.hex <quartus_generated_sof> <output_sof_with_bl2>
60 - Configure SOF to board
64 nios2-configure-sof <output_sof_with_bl2>
70 INFO: DDR: DRAM calibration success.
71 INFO: ECC is disabled.
72 INFO: Init HPS NOC's DDR Scheduler.
73 NOTICE: BL2: v2.0(debug):v2.0-809-g7f8474a-dirty
74 NOTICE: BL2: Built : 17:38:19, Feb 18 2019
75 INFO: BL2: Doing platform setup
76 INFO: BL2: Loading image id 3
77 INFO: Loading image id=3 at address 0xffe1c000
78 INFO: Image id=3 loaded: 0xffe1c000 - 0xffe24034
79 INFO: BL2: Loading image id 5
80 INFO: Loading image id=5 at address 0x50000
81 INFO: Image id=5 loaded: 0x50000 - 0x550000
82 NOTICE: BL2: Booting BL31
83 INFO: Entry point address = 0xffe1c000
85 NOTICE: BL31: v2.0(debug):v2.0-810-g788c436-dirty
86 NOTICE: BL31: Built : 15:17:16, Feb 20 2019
87 INFO: ARM GICv2 driver initialized
88 INFO: BL31: Initializing runtime services
89 WARNING: BL31: cortex_a53: CPU workaround for 855873 was missing!
90 INFO: BL31: Preparing for EL3 exit to normal world
91 INFO: Entry point address = 0x50000
93 UEFI firmware (version 1.0 built at 11:26:18 on Nov 7 2018)