drivers/spi/Kconfig

   1 menuconfig SPI
   2         bool "SPI Support"
   3
   4 if SPI
   5
   6 config DM_SPI
   7         bool "Enable Driver Model for SPI drivers"
   8         depends on DM
   9         help
  10           Enable driver model for SPI. The SPI slave interface
  11           (spi_setup_slave(), spi_xfer(), etc.) is then implemented by
  12           the SPI uclass. Drivers provide methods to access the SPI
  13           buses that they control. The uclass interface is defined in
  14           include/spi.h. The existing spi_slave structure is attached
  15           as 'parent data' to every slave on each bus. Slaves
  16           typically use driver-private data instead of extending the
  17           spi_slave structure.
  18
  19 config SPI_MEM
  20         bool "SPI memory extension"
  21         help
  22           Enable this option if you want to enable the SPI memory extension.
  23           This extension is meant to simplify interaction with SPI memories
  24           by providing an high-level interface to send memory-like commands.
  25
  26 if DM_SPI
  27
  28 config ALTERA_SPI
  29         bool "Altera SPI driver"
  30         help
  31           Enable the Altera SPI driver. This driver can be used to
  32           access the SPI NOR flash on platforms embedding this Altera
  33           IP core. Please find details on the "Embedded Peripherals IP
  34           User Guide" of Altera.
  35
  36 config ATCSPI200_SPI
  37         bool "Andestech ATCSPI200 SPI driver"
  38         help
  39           Enable the Andestech ATCSPI200 SPI driver. This driver can be
  40           used to access the SPI flash on AE3XX and AE250 platforms embedding
  41           this Andestech IP core.
  42
  43 config ATH79_SPI
  44         bool "Atheros SPI driver"
  45         depends on ARCH_ATH79
  46         help
  47           Enable the Atheros ar7xxx/ar9xxx SoC SPI driver, it was used
  48           to access SPI NOR flash and other SPI peripherals. This driver
  49           uses driver model and requires a device tree binding to operate.
  50           please refer to doc/device-tree-bindings/spi/spi-ath79.txt.
  51
  52 config ATMEL_SPI
  53         bool "Atmel SPI driver"
  54         default y if ARCH_AT91
  55         help
  56           This enables driver for the Atmel SPI Controller, present on
  57           many AT91 (ARM) chips. This driver can be used to access
  58           the SPI Flash, such as AT25DF321.
  59
  60 config BCM63XX_HSSPI
  61         bool "BCM63XX HSSPI driver"
  62         depends on ARCH_BMIPS
  63         help
  64           Enable the BCM6328 HSSPI driver. This driver can be used to
  65           access the SPI NOR flash on platforms embedding this Broadcom
  66           SPI core.
  67
  68 config BCM63XX_SPI
  69         bool "BCM6348 SPI driver"
  70         depends on ARCH_BMIPS
  71         help
  72           Enable the BCM6348/BCM6358 SPI driver. This driver can be used to
  73           access the SPI NOR flash on platforms embedding these Broadcom
  74           SPI cores.
  75
  76 config BCMSTB_SPI
  77         bool "BCMSTB SPI driver"
  78         help
  79           Enable the Broadcom set-top box SPI driver. This driver can
  80           be used to access the SPI flash on platforms embedding this
  81           Broadcom SPI core.
  82
  83 config CADENCE_QSPI
  84         bool "Cadence QSPI driver"
  85         help
  86           Enable the Cadence Quad-SPI (QSPI) driver. This driver can be
  87           used to access the SPI NOR flash on platforms embedding this
  88           Cadence IP core.
  89
  90 config CF_SPI
  91         bool "ColdFire SPI driver"
  92         help
  93           Enable the ColdFire SPI driver. This driver can be used on
  94           some m68k SoCs.
  95
  96 config DESIGNWARE_SPI
  97         bool "Designware SPI driver"
  98         help
  99           Enable the Designware SPI driver. This driver can be used to
 100           access the SPI NOR flash on platforms embedding this Designware
 101           IP core.
 102
 103 config EXYNOS_SPI
 104         bool "Samsung Exynos SPI driver"
 105         help
 106           Enable the Samsung Exynos SPI driver. This driver can be used to
 107           access the SPI NOR flash on platforms embedding this Samsung
 108           Exynos IP core.
 109
 110 config FSL_DSPI
 111         bool "Freescale DSPI driver"
 112         help
 113           Enable the Freescale DSPI driver. This driver can be used to
 114           access the SPI NOR flash and SPI Data flash on platforms embedding
 115           this Freescale DSPI IP core. LS102xA and Colibri VF50/VF61 platforms
 116           use this driver.
 117
 118 config ICH_SPI
 119         bool "Intel ICH SPI driver"
 120         imply SPI_FLASH_BAR
 121         help
 122           Enable the Intel ICH SPI driver. This driver can be used to
 123           access the SPI NOR flash on platforms embedding this Intel
 124           ICH IP core.
 125
 126 config MESON_SPIFC
 127         bool "Amlogic Meson SPI Flash Controller driver"
 128         depends on ARCH_MESON
 129         help
 130           Enable the Amlogic Meson SPI Flash Controller SPIFC) driver.
 131           This driver can be used to access the SPI NOR flash chips on
 132           Amlogic Meson SoCs.
 133
 134 config MPC8XX_SPI
 135         bool "MPC8XX SPI Driver"
 136         depends on MPC8xx
 137         help
 138           Enable support for SPI on MPC8XX
 139
 140 config MPC8XXX_SPI
 141         bool "MPC8XXX SPI Driver"
 142         help
 143           Enable support for SPI on the MPC8XXX PowerPC SoCs.
 144
 145 config MT7621_SPI
 146         bool "MediaTek MT7621 SPI driver"
 147         depends on SOC_MT7628
 148         help
 149           Enable the MT7621 SPI driver. This driver can be used to access
 150           the SPI NOR flash on platforms embedding this Ralink / MediaTek
 151           SPI core, like MT7621/7628/7688.
 152
 153 config MTK_QSPI
 154         bool "Mediatek QSPI driver"
 155         imply SPI_FLASH_BAR
 156         help
 157           Enable the Mediatek QSPI driver. This driver can be
 158           used to access the SPI NOR flash on platforms embedding this
 159           Mediatek QSPI IP core.
 160
 161 config MVEBU_A3700_SPI
 162         bool "Marvell Armada 3700 SPI driver"
 163         select CLK_ARMADA_3720
 164         help
 165           Enable the Marvell Armada 3700 SPI driver. This driver can be
 166           used to access the SPI NOR flash on platforms embedding this
 167           Marvell IP core.
 168
 169 config PIC32_SPI
 170         bool "Microchip PIC32 SPI driver"
 171         depends on MACH_PIC32
 172         help
 173           Enable the Microchip PIC32 SPI driver. This driver can be used
 174           to access the SPI NOR flash, MMC-over-SPI on platforms based on
 175           Microchip PIC32 family devices.
 176
 177 config PL022_SPI
 178         bool "ARM AMBA PL022 SSP controller driver"
 179         depends on ARM
 180         help
 181           This selects the ARM(R) AMBA(R) PrimeCell PL022 SSP
 182           controller. If you have an embedded system with an AMBA(R)
 183           bus and a PL022 controller, say Y or M here.
 184
 185 config RENESAS_RPC_SPI
 186         bool "Renesas RPC SPI driver"
 187         depends on RCAR_GEN3 || RZA1
 188         imply SPI_FLASH_BAR
 189         help
 190           Enable the Renesas RPC SPI driver, used to access SPI NOR flash
 191           on Renesas RCar Gen3 SoCs. This uses driver model and requires a
 192           device tree binding to operate.
 193
 194 config ROCKCHIP_SPI
 195         bool "Rockchip SPI driver"
 196         help
 197           Enable the Rockchip SPI driver, used to access SPI NOR flash and
 198           other SPI peripherals (such as the Chrome OS EC) on Rockchip SoCs.
 199           This uses driver model and requires a device tree binding to
 200           operate.
 201
 202 config SANDBOX_SPI
 203         bool "Sandbox SPI driver"
 204         depends on SANDBOX && DM
 205         help
 206           Enable SPI support for sandbox. This is an emulation of a real SPI
 207           bus. Devices can be attached to the bus using the device tree
 208           which specifies the driver to use. As an example, see this device
 209           tree fragment from sandbox.dts. It shows that the SPI bus has a
 210           single flash device on chip select 0 which is emulated by the driver
 211           for "sandbox,spi-flash", which is in drivers/mtd/spi/sandbox.c.
 212
 213           spi@0 {
 214                 #address-cells = <1>;
 215                 #size-cells = <0>;
 216                 reg = <0>;
 217                 compatible = "sandbox,spi";
 218                 cs-gpios = <0>, <&gpio_a 0>;
 219                 flash@0 {
 220                         reg = <0>;
 221                         compatible = "spansion,m25p16", "sandbox,spi-flash";
 222                         spi-max-frequency = <40000000>;
 223                         sandbox,filename = "spi.bin";
 224                 };
 225           };
 226
 227 config SPI_SUNXI
 228         bool "Allwinner SoC SPI controllers"
 229         help
 230           Enable the Allwinner SoC SPi controller driver.
 231
 232           Same controller driver can reuse in all Allwinner SoC variants.
 233
 234 config STM32_QSPI
 235         bool "STM32F7 QSPI driver"
 236         depends on STM32F4 || STM32F7 || ARCH_STM32MP
 237         help
 238           Enable the STM32F7 Quad-SPI (QSPI) driver. This driver can be
 239           used to access the SPI NOR flash chips on platforms embedding
 240           this ST IP core.
 241
 242 config STM32_SPI
 243         bool "STM32 SPI driver"
 244         depends on ARCH_STM32MP
 245         help
 246           Enable the STM32 Serial Peripheral Interface (SPI) driver for STM32MP
 247           SoCs. This uses driver model and requires a device tree binding to
 248           operate.
 249
 250 config TEGRA114_SPI
 251         bool "nVidia Tegra114 SPI driver"
 252         help
 253           Enable the nVidia Tegra114 SPI driver. This driver can be used to
 254           access the SPI NOR flash on platforms embedding this nVidia Tegra114
 255           IP core.
 256
 257           This controller is different than the older SoCs SPI controller and
 258           also register interface get changed with this controller.
 259
 260 config TEGRA20_SFLASH
 261         bool "nVidia Tegra20 Serial Flash controller driver"
 262         help
 263           Enable the nVidia Tegra20 Serial Flash controller driver. This driver
 264           can be used to access the SPI NOR flash on platforms embedding this
 265           nVidia Tegra20 IP core.
 266
 267 config TEGRA20_SLINK
 268         bool "nVidia Tegra20/Tegra30 SLINK driver"
 269         help
 270           Enable the nVidia Tegra20/Tegra30 SLINK driver. This driver can
 271           be used to access the SPI NOR flash on platforms embedding this
 272           nVidia Tegra20/Tegra30 IP cores.
 273
 274 config TEGRA210_QSPI
 275         bool "nVidia Tegra210 QSPI driver"
 276         help
 277           Enable the Tegra Quad-SPI (QSPI) driver for T210. This driver
 278           be used to access SPI chips on platforms embedding this
 279           NVIDIA Tegra210 IP core.
 280
 281 config TI_QSPI
 282         bool "TI QSPI driver"
 283         imply TI_EDMA3
 284         help
 285           Enable the TI Quad-SPI (QSPI) driver for DRA7xx and AM43xx evms.
 286           This driver support spi flash single, quad and memory reads.
 287
 288 config XILINX_SPI
 289         bool "Xilinx SPI driver"
 290         help
 291           Enable the Xilinx SPI driver from the Xilinx EDK. This SPI
 292           controller support 8 bit SPI transfers only, with or w/o FIFO.
 293           For more info on Xilinx SPI Register Definitions and Overview
 294           see driver file - drivers/spi/xilinx_spi.c
 295
 296 config ZYNQ_SPI
 297         bool "Zynq SPI driver"
 298         depends on ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL
 299         help
 300           Enable the Zynq SPI driver. This driver can be used to
 301           access the SPI NOR flash on platforms embedding this Zynq
 302           SPI IP core.
 303
 304 config ZYNQ_QSPI
 305         bool "Zynq QSPI driver"
 306         depends on ARCH_ZYNQ
 307         imply SPI_FLASH_BAR
 308         help
 309           Enable the Zynq Quad-SPI (QSPI) driver. This driver can be
 310           used to access the SPI NOR flash on platforms embedding this
 311           Zynq QSPI IP core. This IP is used to connect the flash in
 312           4-bit qspi, 8-bit dual stacked and shared 4-bit dual parallel.
 313
 314 config ZYNQMP_GQSPI
 315         bool "Configure ZynqMP Generic QSPI"
 316         depends on ARCH_ZYNQMP || ARCH_VERSAL
 317         help
 318           This option is used to enable ZynqMP QSPI controller driver which
 319           is used to communicate with qspi flash devices.
 320
 321 endif # if DM_SPI
 322
 323 config SOFT_SPI
 324         bool "Soft SPI driver"
 325         help
 326          Enable Soft SPI driver. This driver is to use GPIO simulate
 327          the SPI protocol.
 328
 329 config MSCC_BB_SPI
 330         bool "MSCC bitbang SPI driver"
 331         depends on SOC_VCOREIII
 332         help
 333           Enable MSCC bitbang SPI driver. This driver can be used on
 334           MSCC SOCs.
 335
 336 config CF_SPI
 337         bool "ColdFire SPI driver"
 338         help
 339           Enable the ColdFire SPI driver. This driver can be used on
 340           some m68k SoCs.
 341
 342 config FSL_ESPI
 343         bool "Freescale eSPI driver"
 344         help
 345           Enable the Freescale eSPI driver. This driver can be used to
 346           access the SPI interface and SPI NOR flash on platforms embedding
 347           this Freescale eSPI IP core.
 348
 349 config FSL_QSPI
 350         bool "Freescale QSPI driver"
 351         imply SPI_FLASH_BAR
 352         help
 353           Enable the Freescale Quad-SPI (QSPI) driver. This driver can be
 354           used to access the SPI NOR flash on platforms embedding this
 355           Freescale IP core.
 356
 357 config DAVINCI_SPI
 358         bool "Davinci & Keystone SPI driver"
 359         depends on ARCH_DAVINCI || ARCH_KEYSTONE
 360         help
 361           Enable the Davinci SPI driver
 362
 363 config SH_SPI
 364         bool "SuperH SPI driver"
 365         help
 366           Enable the SuperH SPI controller driver. This driver can be used
 367           on various SuperH SoCs, such as SH7757.
 368
 369 config SH_QSPI
 370         bool "Renesas Quad SPI driver"
 371         help
 372           Enable the Renesas Quad SPI controller driver. This driver can be
 373           used on Renesas SoCs.
 374
 375 config KIRKWOOD_SPI
 376         bool "Marvell Kirkwood SPI Driver"
 377         help
 378           Enable support for SPI on various Marvell SoCs, such as
 379           Kirkwood and Armada 375.
 380
 381 config LPC32XX_SSP
 382         bool "LPC32XX SPI Driver"
 383         help
 384           Enable support for SPI on LPC32xx
 385
 386 config MXC_SPI
 387         bool "MXC SPI Driver"
 388         help
 389           Enable the MXC SPI controller driver. This driver can be used
 390           on various i.MX SoCs such as i.MX31/35/51/6/7.
 391
 392 config MXS_SPI
 393         bool "MXS SPI Driver"
 394         help
 395           Enable the MXS SPI controller driver. This driver can be used
 396           on the i.MX23 and i.MX28 SoCs.
 397
 398 config OMAP3_SPI
 399         bool "McSPI driver for OMAP"
 400         help
 401           SPI master controller for OMAP24XX and later Multichannel SPI
 402           (McSPI). This driver be used to access SPI chips on platforms
 403           embedding this OMAP3 McSPI IP core.
 404
 405 endif # menu "SPI Support"