include/configs/P1010RDB.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2010-2011 Freescale Semiconductor, Inc.
   4  */
   5
   6 /*
   7  * P010 RDB board configuration file
   8  */
   9
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #include <asm/config_mpc85xx.h>
  14 #define CONFIG_NAND_FSL_IFC
  15
  16 #ifdef CONFIG_SDCARD
  17 #define CONFIG_SPL_FLUSH_IMAGE
  18 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  19 #define CONFIG_SPL_PAD_TO               0x18000
  20 #define CONFIG_SPL_MAX_SIZE             (96 * 1024)
  21 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (512 << 10)
  22 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x11000000)
  23 #define CONFIG_SYS_MMC_U_BOOT_START     (0x11000000)
  24 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (96 << 10)
  25 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  26 #ifdef CONFIG_SPL_BUILD
  27 #define CONFIG_SPL_COMMON_INIT_DDR
  28 #endif
  29 #endif
  30
  31 #ifdef CONFIG_SPIFLASH
  32 #ifdef CONFIG_SECURE_BOOT
  33 #define CONFIG_RAMBOOT_SPIFLASH
  34 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
  35 #else
  36 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  37 #define CONFIG_SPL_FLUSH_IMAGE
  38 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  39 #define CONFIG_SPL_PAD_TO                       0x18000
  40 #define CONFIG_SPL_MAX_SIZE                     (96 * 1024)
  41 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (512 << 10)
  42 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x11000000)
  43 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x11000000)
  44 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (96 << 10)
  45 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  46 #ifdef CONFIG_SPL_BUILD
  47 #define CONFIG_SPL_COMMON_INIT_DDR
  48 #endif
  49 #endif
  50 #endif
  51
  52 #ifdef CONFIG_NAND
  53 #ifdef CONFIG_SECURE_BOOT
  54 #define CONFIG_SPL_INIT_MINIMAL
  55 #define CONFIG_SPL_FLUSH_IMAGE
  56 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  57
  58 #define CONFIG_SPL_MAX_SIZE             8192
  59 #define CONFIG_SPL_RELOC_TEXT_BASE      0x00100000
  60 #define CONFIG_SPL_RELOC_STACK          0x00100000
  61 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((768 << 10) - 0x2000)
  62 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x00200000 - CONFIG_SPL_MAX_SIZE)
  63 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  64 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0
  65 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  66 #else
  67 #ifdef CONFIG_TPL_BUILD
  68 #define CONFIG_SPL_FLUSH_IMAGE
  69 #define CONFIG_SPL_NAND_INIT
  70 #define CONFIG_SPL_COMMON_INIT_DDR
  71 #define CONFIG_SPL_MAX_SIZE             (128 << 10)
  72 #define CONFIG_TPL_TEXT_BASE            0xD0001000
  73 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  74 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (576 << 10)
  75 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x11000000)
  76 #define CONFIG_SYS_NAND_U_BOOT_START    (0x11000000)
  77 #define CONFIG_SYS_NAND_U_BOOT_OFFS     ((128 + 128) << 10)
  78 #elif defined(CONFIG_SPL_BUILD)
  79 #define CONFIG_SPL_INIT_MINIMAL
  80 #define CONFIG_SPL_NAND_MINIMAL
  81 #define CONFIG_SPL_FLUSH_IMAGE
  82 #define CONFIG_SPL_MAX_SIZE             8192
  83 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (128 << 10)
  84 #define CONFIG_SYS_NAND_U_BOOT_DST      0xD0000000
  85 #define CONFIG_SYS_NAND_U_BOOT_START    0xD0000000
  86 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (128 << 10)
  87 #endif
  88 #define CONFIG_SPL_PAD_TO       0x20000
  89 #define CONFIG_TPL_PAD_TO       0x20000
  90 #define CONFIG_SPL_TARGET       "u-boot-with-spl.bin"
  91 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  92 #endif
  93 #endif
  94
  95 #ifdef CONFIG_NAND_SECBOOT      /* NAND Boot */
  96 #define CONFIG_RAMBOOT_NAND
  97 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
  98 #endif
  99
 100 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 101 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 102 #endif
 103
 104 #ifdef CONFIG_TPL_BUILD
 105 #define CONFIG_SYS_MONITOR_BASE CONFIG_TPL_TEXT_BASE
 106 #elif defined(CONFIG_SPL_BUILD)
 107 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 108 #else
 109 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 110 #endif
 111
 112 /* High Level Configuration Options */
 113 #define CONFIG_SYS_HAS_SERDES           /* common SERDES init code */
 114
 115 #if defined(CONFIG_PCI)
 116 #define CONFIG_PCIE1                    /* PCIE controller 1 (slot 1) */
 117 #define CONFIG_PCIE2                    /* PCIE controller 2 (slot 2) */
 118 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
 119 #define CONFIG_PCI_INDIRECT_BRIDGE      /* indirect PCI bridge support */
 120 #define CONFIG_FSL_PCIE_RESET           /* need PCIe reset errata */
 121 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
 122
 123 /*
 124  * PCI Windows
 125  * Memory space is mapped 1-1, but I/O space must start from 0.
 126  */
 127 /* controller 1, Slot 1, tgtid 1, Base address a000 */
 128 #define CONFIG_SYS_PCIE1_NAME           "mini PCIe Slot"
 129 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 130 #ifdef CONFIG_PHYS_64BIT
 131 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 132 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 133 #else
 134 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 135 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 136 #endif
 137 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 138 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc00000
 139 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 140 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 141 #ifdef CONFIG_PHYS_64BIT
 142 #define CONFIG_SYS_PCIE1_IO_PHYS        0xfffc00000ull
 143 #else
 144 #define CONFIG_SYS_PCIE1_IO_PHYS        0xffc00000
 145 #endif
 146
 147 /* controller 2, Slot 2, tgtid 2, Base address 9000 */
 148 #if defined(CONFIG_TARGET_P1010RDB_PA)
 149 #define CONFIG_SYS_PCIE2_NAME           "PCIe Slot"
 150 #elif defined(CONFIG_TARGET_P1010RDB_PB)
 151 #define CONFIG_SYS_PCIE2_NAME           "mini PCIe Slot"
 152 #endif
 153 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 154 #ifdef CONFIG_PHYS_64BIT
 155 #define CONFIG_SYS_PCIE2_MEM_BUS        0xc0000000
 156 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 157 #else
 158 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 159 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 160 #endif
 161 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 162 #define CONFIG_SYS_PCIE2_IO_VIRT        0xffc10000
 163 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 164 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 165 #ifdef CONFIG_PHYS_64BIT
 166 #define CONFIG_SYS_PCIE2_IO_PHYS        0xfffc10000ull
 167 #else
 168 #define CONFIG_SYS_PCIE2_IO_PHYS        0xffc10000
 169 #endif
 170
 171 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 172 #endif
 173
 174 #define CONFIG_ENV_OVERWRITE
 175
 176 #define CONFIG_DDR_CLK_FREQ     66666666 /* DDRCLK on P1010 RDB */
 177 #define CONFIG_SYS_CLK_FREQ     66666666 /* SYSCLK for P1010 RDB */
 178
 179 #define CONFIG_HWCONFIG
 180 /*
 181  * These can be toggled for performance analysis, otherwise use default.
 182  */
 183 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
 184 #define CONFIG_BTB                      /* toggle branch predition */
 185
 186
 187 #define CONFIG_ENABLE_36BIT_PHYS
 188
 189 #ifdef CONFIG_PHYS_64BIT
 190 #define CONFIG_ADDR_MAP                 1
 191 #define CONFIG_SYS_NUM_ADDR_MAP         16      /* number of TLB1 entries */
 192 #endif
 193
 194 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 195 #define CONFIG_SYS_MEMTEST_END          0x1fffffff
 196
 197 /* DDR Setup */
 198 #define CONFIG_SYS_DDR_RAW_TIMING
 199 #define CONFIG_DDR_SPD
 200 #define CONFIG_SYS_SPD_BUS_NUM          1
 201 #define SPD_EEPROM_ADDRESS              0x52
 202
 203 #define CONFIG_MEM_INIT_VALUE           0xDeadBeef
 204
 205 #ifndef __ASSEMBLY__
 206 extern unsigned long get_sdram_size(void);
 207 #endif
 208 #define CONFIG_SYS_SDRAM_SIZE           get_sdram_size() /* DDR size */
 209 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 210 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 211
 212 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 213 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
 214
 215 /* DDR3 Controller Settings */
 216 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000003f
 217 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80014302
 218 #define CONFIG_SYS_DDR_CS0_CONFIG_2     0x00000000
 219 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 220 #define CONFIG_SYS_DDR_INIT_ADDR        0x00000000
 221 #define CONFIG_SYS_DDR_INIT_EXT_ADDR    0x00000000
 222 #define CONFIG_SYS_DDR_MODE_CONTROL     0x00000000
 223 #define CONFIG_SYS_DDR_ZQ_CONTROL       0x89080600
 224 #define CONFIG_SYS_DDR_SR_CNTR          0x00000000
 225 #define CONFIG_SYS_DDR_RCW_1            0x00000000
 226 #define CONFIG_SYS_DDR_RCW_2            0x00000000
 227 #define CONFIG_SYS_DDR_CONTROL          0xc70c0008      /* Type = DDR3  */
 228 #define CONFIG_SYS_DDR_CONTROL_2        0x24401000
 229 #define CONFIG_SYS_DDR_TIMING_4         0x00000001
 230 #define CONFIG_SYS_DDR_TIMING_5         0x03402400
 231
 232 #define CONFIG_SYS_DDR_TIMING_3_800     0x00030000
 233 #define CONFIG_SYS_DDR_TIMING_0_800     0x00110104
 234 #define CONFIG_SYS_DDR_TIMING_1_800     0x6f6b8644
 235 #define CONFIG_SYS_DDR_TIMING_2_800     0x0FA888CF
 236 #define CONFIG_SYS_DDR_CLK_CTRL_800     0x03000000
 237 #define CONFIG_SYS_DDR_MODE_1_800       0x00441420
 238 #define CONFIG_SYS_DDR_MODE_2_800       0x00000000
 239 #define CONFIG_SYS_DDR_INTERVAL_800     0x0C300100
 240 #define CONFIG_SYS_DDR_WRLVL_CONTROL_800 0x8675f608
 241
 242 /* settings for DDR3 at 667MT/s */
 243 #define CONFIG_SYS_DDR_TIMING_3_667             0x00010000
 244 #define CONFIG_SYS_DDR_TIMING_0_667             0x00110004
 245 #define CONFIG_SYS_DDR_TIMING_1_667             0x5d59e544
 246 #define CONFIG_SYS_DDR_TIMING_2_667             0x0FA890CD
 247 #define CONFIG_SYS_DDR_CLK_CTRL_667             0x03000000
 248 #define CONFIG_SYS_DDR_MODE_1_667               0x00441210
 249 #define CONFIG_SYS_DDR_MODE_2_667               0x00000000
 250 #define CONFIG_SYS_DDR_INTERVAL_667             0x0a280000
 251 #define CONFIG_SYS_DDR_WRLVL_CONTROL_667        0x8675F608
 252
 253 #define CONFIG_SYS_CCSRBAR                      0xffe00000
 254 #define CONFIG_SYS_CCSRBAR_PHYS_LOW             CONFIG_SYS_CCSRBAR
 255
 256 /* Don't relocate CCSRBAR while in NAND_SPL */
 257 #ifdef CONFIG_SPL_BUILD
 258 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 259 #endif
 260
 261 /*
 262  * Memory map
 263  *
 264  * 0x0000_0000  0x3fff_ffff     DDR                     1G cacheable
 265  * 0x8000_0000  0xbfff_ffff     PCI Express Mem         1.5G non-cacheable
 266  * 0xffc0_0000  0xffc3_ffff     PCI IO range            256k non-cacheable
 267  *
 268  * Localbus non-cacheable
 269  * 0xff80_0000  0xff8f_ffff     NAND Flash              1M non-cacheable
 270  * 0xffb0_0000  0xffbf_ffff     Board CPLD              1M non-cacheable
 271  * 0xffd0_0000  0xffd0_3fff     L1 for stack            16K Cacheable TLB0
 272  * 0xffe0_0000  0xffef_ffff     CCSR                    1M non-cacheable
 273  */
 274
 275 /*
 276  * IFC Definitions
 277  */
 278 /* NOR Flash on IFC */
 279
 280 #define CONFIG_SYS_FLASH_BASE           0xee000000
 281 #define CONFIG_SYS_MAX_FLASH_SECT       256     /* 32M */
 282
 283 #ifdef CONFIG_PHYS_64BIT
 284 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 285 #else
 286 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 287 #endif
 288
 289 #define CONFIG_SYS_NOR_CSPR     (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 290                                 CSPR_PORT_SIZE_16 | \
 291                                 CSPR_MSEL_NOR | \
 292                                 CSPR_V)
 293 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(32*1024*1024)
 294 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(7)
 295 /* NOR Flash Timing Params */
 296 #define CONFIG_SYS_NOR_FTIM0    FTIM0_NOR_TACSE(0x4) | \
 297                                 FTIM0_NOR_TEADC(0x5) | \
 298                                 FTIM0_NOR_TEAHC(0x5)
 299 #define CONFIG_SYS_NOR_FTIM1    FTIM1_NOR_TACO(0x1e) | \
 300                                 FTIM1_NOR_TRAD_NOR(0x0f)
 301 #define CONFIG_SYS_NOR_FTIM2    FTIM2_NOR_TCS(0x4) | \
 302                                 FTIM2_NOR_TCH(0x4) | \
 303                                 FTIM2_NOR_TWP(0x1c)
 304 #define CONFIG_SYS_NOR_FTIM3    0x0
 305
 306 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 307 #define CONFIG_SYS_FLASH_QUIET_TEST
 308 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 309 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 310
 311 #undef CONFIG_SYS_FLASH_CHECKSUM
 312 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 313 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 314
 315 /* CFI for NOR Flash */
 316 #define CONFIG_SYS_FLASH_EMPTY_INFO
 317
 318 /* NAND Flash on IFC */
 319 #define CONFIG_SYS_NAND_BASE            0xff800000
 320 #ifdef CONFIG_PHYS_64BIT
 321 #define CONFIG_SYS_NAND_BASE_PHYS       0xfff800000ull
 322 #else
 323 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 324 #endif
 325
 326 #define CONFIG_MTD_PARTITION
 327
 328 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 329                                 | CSPR_PORT_SIZE_8      \
 330                                 | CSPR_MSEL_NAND        \
 331                                 | CSPR_V)
 332 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 333
 334 #if defined(CONFIG_TARGET_P1010RDB_PA)
 335 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 336                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 337                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 338                                 | CSOR_NAND_RAL_2       /* RAL = 2 Bytes */ \
 339                                 | CSOR_NAND_PGS_512     /* Page Size = 512b */ \
 340                                 | CSOR_NAND_SPRZ_16     /* Spare size = 16 */ \
 341                                 | CSOR_NAND_PB(32))     /* 32 Pages Per Block */
 342 #define CONFIG_SYS_NAND_BLOCK_SIZE      (16 * 1024)
 343
 344 #elif defined(CONFIG_TARGET_P1010RDB_PB)
 345 #define CONFIG_SYS_NAND_ONFI_DETECTION
 346 #define CONFIG_SYS_NAND_CSOR   (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 347                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 348                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 349                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 350                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 351                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 352                                 | CSOR_NAND_PB(128))  /*Pages Per Block = 128 */
 353 #define CONFIG_SYS_NAND_BLOCK_SIZE     (512 * 1024)
 354 #endif
 355
 356 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 357 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 358
 359 #if defined(CONFIG_TARGET_P1010RDB_PA)
 360 /* NAND Flash Timing Params */
 361 #define CONFIG_SYS_NAND_FTIM0           FTIM0_NAND_TCCST(0x01) | \
 362                                         FTIM0_NAND_TWP(0x0C)   | \
 363                                         FTIM0_NAND_TWCHT(0x04) | \
 364                                         FTIM0_NAND_TWH(0x05)
 365 #define CONFIG_SYS_NAND_FTIM1           FTIM1_NAND_TADLE(0x1d) | \
 366                                         FTIM1_NAND_TWBE(0x1d)  | \
 367                                         FTIM1_NAND_TRR(0x07)   | \
 368                                         FTIM1_NAND_TRP(0x0c)
 369 #define CONFIG_SYS_NAND_FTIM2           FTIM2_NAND_TRAD(0x0c) | \
 370                                         FTIM2_NAND_TREH(0x05) | \
 371                                         FTIM2_NAND_TWHRE(0x0f)
 372 #define CONFIG_SYS_NAND_FTIM3           FTIM3_NAND_TWW(0x04)
 373
 374 #elif defined(CONFIG_TARGET_P1010RDB_PB)
 375 /* support MT29F16G08ABABAWP 4k-pagesize 2G-bytes NAND */
 376 /* ONFI NAND Flash mode0 Timing Params */
 377 #define CONFIG_SYS_NAND_FTIM0  (FTIM0_NAND_TCCST(0x07)| \
 378                                         FTIM0_NAND_TWP(0x18)   | \
 379                                         FTIM0_NAND_TWCHT(0x07) | \
 380                                         FTIM0_NAND_TWH(0x0a))
 381 #define CONFIG_SYS_NAND_FTIM1  (FTIM1_NAND_TADLE(0x32)| \
 382                                         FTIM1_NAND_TWBE(0x39)  | \
 383                                         FTIM1_NAND_TRR(0x0e)   | \
 384                                         FTIM1_NAND_TRP(0x18))
 385 #define CONFIG_SYS_NAND_FTIM2  (FTIM2_NAND_TRAD(0x0f) | \
 386                                         FTIM2_NAND_TREH(0x0a)  | \
 387                                         FTIM2_NAND_TWHRE(0x1e))
 388 #define CONFIG_SYS_NAND_FTIM3   0x0
 389 #endif
 390
 391 #define CONFIG_SYS_NAND_DDR_LAW         11
 392
 393 /* Set up IFC registers for boot location NOR/NAND */
 394 #if defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT)
 395 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 396 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 397 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 398 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 399 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 400 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 401 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 402 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 403 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 404 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 405 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 406 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 407 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 408 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 409 #else
 410 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 411 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 412 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 413 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 414 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 415 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 416 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 417 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 418 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 419 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 420 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 421 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 422 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 423 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 424 #endif
 425
 426 /* CPLD on IFC */
 427 #define CONFIG_SYS_CPLD_BASE            0xffb00000
 428
 429 #ifdef CONFIG_PHYS_64BIT
 430 #define CONFIG_SYS_CPLD_BASE_PHYS       0xfffb00000ull
 431 #else
 432 #define CONFIG_SYS_CPLD_BASE_PHYS       CONFIG_SYS_CPLD_BASE
 433 #endif
 434
 435 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 436                                 | CSPR_PORT_SIZE_8 \
 437                                 | CSPR_MSEL_GPCM \
 438                                 | CSPR_V)
 439 #define CONFIG_SYS_AMASK3               IFC_AMASK(64*1024)
 440 #define CONFIG_SYS_CSOR3                0x0
 441 /* CPLD Timing parameters for IFC CS3 */
 442 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 443                                         FTIM0_GPCM_TEADC(0x0e) | \
 444                                         FTIM0_GPCM_TEAHC(0x0e))
 445 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 446                                         FTIM1_GPCM_TRAD(0x1f))
 447 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 448                                         FTIM2_GPCM_TCH(0x8) | \
 449                                         FTIM2_GPCM_TWP(0x1f))
 450 #define CONFIG_SYS_CS3_FTIM3            0x0
 451
 452 #if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH) || \
 453         defined(CONFIG_RAMBOOT_NAND)
 454 #define CONFIG_SYS_RAMBOOT
 455 #else
 456 #undef CONFIG_SYS_RAMBOOT
 457 #endif
 458
 459 #ifdef CONFIG_SYS_FSL_ERRATUM_IFC_A003399
 460 #if !defined(CONFIG_SPL) && !defined(CONFIG_SYS_RAMBOOT)
 461 #define CONFIG_A003399_NOR_WORKAROUND
 462 #endif
 463 #endif
 464
 465 #define CONFIG_SYS_INIT_RAM_LOCK
 466 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000 /* stack in RAM */
 467 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000 /* End of used area in RAM */
 468
 469 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE \
 470                                                 - GENERATED_GBL_DATA_SIZE)
 471 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 472
 473 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 474 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc*/
 475
 476 /*
 477  * Config the L2 Cache as L2 SRAM
 478  */
 479 #if defined(CONFIG_SPL_BUILD)
 480 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
 481 #define CONFIG_SYS_INIT_L2_ADDR         0xD0000000
 482 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 483 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 484 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 485 #define CONFIG_SPL_RELOC_TEXT_BASE      0xD0001000
 486 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
 487 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 128 * 1024)
 488 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (128 << 10)
 489 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 96 * 1024)
 490 #elif defined(CONFIG_NAND)
 491 #ifdef CONFIG_TPL_BUILD
 492 #define CONFIG_SYS_INIT_L2_ADDR         0xD0000000
 493 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 494 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 495 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 496 #define CONFIG_SPL_RELOC_TEXT_BASE      0xD0001000
 497 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024)
 498 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024)
 499 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (48 << 10)
 500 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024)
 501 #else
 502 #define CONFIG_SYS_INIT_L2_ADDR         0xD0000000
 503 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 504 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 505 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 506 #define CONFIG_SPL_RELOC_TEXT_BASE      (CONFIG_SYS_INIT_L2_END - 0x3000)
 507 #define CONFIG_SPL_RELOC_STACK          ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
 508 #endif
 509 #endif
 510 #endif
 511
 512 /* Serial Port */
 513 #undef  CONFIG_SERIAL_SOFTWARE_FIFO
 514 #define CONFIG_SYS_NS16550_SERIAL
 515 #define CONFIG_SYS_NS16550_REG_SIZE     1
 516 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 517 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
 518 #define CONFIG_NS16550_MIN_FUNCTIONS
 519 #endif
 520
 521 #define CONFIG_SYS_BAUDRATE_TABLE       \
 522         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 523
 524 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 525 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 526
 527 /* I2C */
 528 #define CONFIG_SYS_I2C
 529 #define CONFIG_SYS_I2C_FSL
 530 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 531 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 532 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 533 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 534 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 535 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 536 #define I2C_PCA9557_ADDR1               0x18
 537 #define I2C_PCA9557_ADDR2               0x19
 538 #define I2C_PCA9557_BUS_NUM             0
 539
 540 /* I2C EEPROM */
 541 #if defined(CONFIG_TARGET_P1010RDB_PB)
 542 #define CONFIG_ID_EEPROM
 543 #ifdef CONFIG_ID_EEPROM
 544 #define CONFIG_SYS_I2C_EEPROM_NXID
 545 #endif
 546 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 547 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 548 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 549 #define MAX_NUM_PORTS                   9 /* for 128Bytes EEPROM */
 550 #endif
 551 /* enable read and write access to EEPROM */
 552 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 553 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 554 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 555
 556 /* RTC */
 557 #define CONFIG_RTC_PT7C4338
 558 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 559
 560 /*
 561  * SPI interface will not be available in case of NAND boot SPI CS0 will be
 562  * used for SLIC
 563  */
 564 #if !defined(CONFIG_NAND) || !defined(CONFIG_NAND_SECBOOT)
 565 /* eSPI - Enhanced SPI */
 566 #endif
 567
 568 #if defined(CONFIG_TSEC_ENET)
 569 #define CONFIG_MII_DEFAULT_TSEC 1       /* Allow unregistered phys */
 570 #define CONFIG_TSEC1    1
 571 #define CONFIG_TSEC1_NAME       "eTSEC1"
 572 #define CONFIG_TSEC2    1
 573 #define CONFIG_TSEC2_NAME       "eTSEC2"
 574 #define CONFIG_TSEC3    1
 575 #define CONFIG_TSEC3_NAME       "eTSEC3"
 576
 577 #define TSEC1_PHY_ADDR          1
 578 #define TSEC2_PHY_ADDR          0
 579 #define TSEC3_PHY_ADDR          2
 580
 581 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 582 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 583 #define TSEC3_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 584
 585 #define TSEC1_PHYIDX            0
 586 #define TSEC2_PHYIDX            0
 587 #define TSEC3_PHYIDX            0
 588
 589 #define CONFIG_ETHPRIME         "eTSEC1"
 590
 591 /* TBI PHY configuration for SGMII mode */
 592 #define CONFIG_TSEC_TBICR_SETTINGS ( \
 593                 TBICR_PHY_RESET \
 594                 | TBICR_ANEG_ENABLE \
 595                 | TBICR_FULL_DUPLEX \
 596                 | TBICR_SPEED1_SET \
 597                 )
 598
 599 #endif  /* CONFIG_TSEC_ENET */
 600
 601 /* SATA */
 602 #define CONFIG_FSL_SATA_V2
 603
 604 #ifdef CONFIG_FSL_SATA
 605 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 606 #define CONFIG_SATA1
 607 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 608 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 609 #define CONFIG_SATA2
 610 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 611 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 612
 613 #define CONFIG_LBA48
 614 #endif /* #ifdef CONFIG_FSL_SATA  */
 615
 616 #ifdef CONFIG_MMC
 617 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 618 #endif
 619
 620 #define CONFIG_HAS_FSL_DR_USB
 621
 622 #if defined(CONFIG_HAS_FSL_DR_USB)
 623 #ifdef CONFIG_USB_EHCI_HCD
 624 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 625 #define CONFIG_USB_EHCI_FSL
 626 #endif
 627 #endif
 628
 629 /*
 630  * Environment
 631  */
 632 #if defined(CONFIG_SDCARD)
 633 #define CONFIG_FSL_FIXED_MMC_LOCATION
 634 #define CONFIG_SYS_MMC_ENV_DEV          0
 635 #define CONFIG_ENV_SIZE                 0x2000
 636 #elif defined(CONFIG_SPIFLASH)
 637 #define CONFIG_ENV_OFFSET       0x100000        /* 1MB */
 638 #define CONFIG_ENV_SECT_SIZE    0x10000
 639 #define CONFIG_ENV_SIZE         0x2000
 640 #elif defined(CONFIG_NAND)
 641 #ifdef CONFIG_TPL_BUILD
 642 #define CONFIG_ENV_SIZE         0x2000
 643 #define CONFIG_ENV_ADDR         (CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
 644 #else
 645 #if defined(CONFIG_TARGET_P1010RDB_PA)
 646 #define CONFIG_ENV_SIZE         CONFIG_SYS_NAND_BLOCK_SIZE
 647 #define CONFIG_ENV_RANGE        (3 * CONFIG_ENV_SIZE) /* 3*16=48K for env */
 648 #elif defined(CONFIG_TARGET_P1010RDB_PB)
 649 #define CONFIG_ENV_SIZE         (16 * 1024)
 650 #define CONFIG_ENV_RANGE        (32 * CONFIG_ENV_SIZE) /* new block size 512K */
 651 #endif
 652 #endif
 653 #define CONFIG_ENV_OFFSET       (1024 * 1024)
 654 #elif defined(CONFIG_SYS_RAMBOOT)
 655 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_MONITOR_BASE - 0x1000)
 656 #define CONFIG_ENV_SIZE                 0x2000
 657 #else
 658 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 659 #define CONFIG_ENV_SIZE         0x2000
 660 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 661 #endif
 662
 663 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 664 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 665
 666 #undef CONFIG_WATCHDOG                  /* watchdog disabled */
 667
 668 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI_HCD) \
 669                  || defined(CONFIG_FSL_SATA)
 670 #endif
 671
 672 /*
 673  * Miscellaneous configurable options
 674  */
 675 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 676
 677 /*
 678  * For booting Linux, the board info and command line data
 679  * have to be in the first 64 MB of memory, since this is
 680  * the maximum mapped by the Linux kernel during initialization.
 681  */
 682 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20) /* Initial Memory map for Linux */
 683 #define CONFIG_SYS_BOOTM_LEN    (64 << 20) /* Increase max gunzip size */
 684
 685 #if defined(CONFIG_CMD_KGDB)
 686 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 687 #endif
 688
 689 /*
 690  * Environment Configuration
 691  */
 692
 693 #if defined(CONFIG_TSEC_ENET)
 694 #define CONFIG_HAS_ETH0
 695 #define CONFIG_HAS_ETH1
 696 #define CONFIG_HAS_ETH2
 697 #endif
 698
 699 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 700 #define CONFIG_BOOTFILE         "uImage"
 701 #define CONFIG_UBOOTPATH        u-boot.bin/* U-Boot image on TFTP server */
 702
 703 /* default location for tftp and bootm */
 704 #define CONFIG_LOADADDR         1000000
 705
 706 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 707         "hwconfig=" __stringify(CONFIG_DEF_HWCONFIG)  "\0"      \
 708         "netdev=eth0\0"                                         \
 709         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 710         "loadaddr=1000000\0"                    \
 711         "consoledev=ttyS0\0"                            \
 712         "ramdiskaddr=2000000\0"                 \
 713         "ramdiskfile=rootfs.ext2.gz.uboot\0"            \
 714         "fdtaddr=1e00000\0"                             \
 715         "fdtfile=p1010rdb.dtb\0"                \
 716         "bdev=sda1\0"   \
 717         "hwconfig=usb1:dr_mode=host,phy_type=utmi\0"    \
 718         "othbootargs=ramdisk_size=600000\0" \
 719         "usbfatboot=setenv bootargs root=/dev/ram rw "  \
 720         "console=$consoledev,$baudrate $othbootargs; "  \
 721         "usb start;"                    \
 722         "fatload usb 0:2 $loadaddr $bootfile;"          \
 723         "fatload usb 0:2 $fdtaddr $fdtfile;"    \
 724         "fatload usb 0:2 $ramdiskaddr $ramdiskfile;"    \
 725         "bootm $loadaddr $ramdiskaddr $fdtaddr\0"               \
 726         "usbext2boot=setenv bootargs root=/dev/ram rw " \
 727         "console=$consoledev,$baudrate $othbootargs; "  \
 728         "usb start;"                    \
 729         "ext2load usb 0:4 $loadaddr $bootfile;"         \
 730         "ext2load usb 0:4 $fdtaddr $fdtfile;"   \
 731         "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;"   \
 732         "bootm $loadaddr $ramdiskaddr $fdtaddr\0"       \
 733         CONFIG_BOOTMODE
 734
 735 #if defined(CONFIG_TARGET_P1010RDB_PA)
 736 #define CONFIG_BOOTMODE \
 737         "boot_bank0=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \
 738         "mw.b ffb00011 0; mw.b ffb00009 0; reset\0" \
 739         "boot_bank1=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \
 740         "mw.b ffb00011 0; mw.b ffb00009 1; reset\0" \
 741         "boot_nand=i2c dev 0; i2c mw 18 1 f9; i2c mw 18 3 f0;" \
 742         "mw.b ffb00011 0; mw.b ffb00017 1; reset\0"
 743
 744 #elif defined(CONFIG_TARGET_P1010RDB_PB)
 745 #define CONFIG_BOOTMODE \
 746         "boot_bank0=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \
 747         "i2c mw 19 1 2; i2c mw 19 3 e1; reset\0" \
 748         "boot_bank1=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \
 749         "i2c mw 19 1 12; i2c mw 19 3 e1; reset\0" \
 750         "boot_nand=i2c dev 0; i2c mw 18 1 fc; i2c mw 18 3 0;" \
 751         "i2c mw 19 1 8; i2c mw 19 3 f7; reset\0" \
 752         "boot_spi=i2c dev 0; i2c mw 18 1 fa; i2c mw 18 3 0;" \
 753         "i2c mw 19 1 0; i2c mw 19 3 f7; reset\0" \
 754         "boot_sd=i2c dev 0; i2c mw 18 1 f8; i2c mw 18 3 0;" \
 755         "i2c mw 19 1 4; i2c mw 19 3 f3; reset\0"
 756 #endif
 757
 758 #define CONFIG_RAMBOOTCOMMAND           \
 759         "setenv bootargs root=/dev/ram rw "     \
 760         "console=$consoledev,$baudrate $othbootargs; "  \
 761         "tftp $ramdiskaddr $ramdiskfile;"       \
 762         "tftp $loadaddr $bootfile;"             \
 763         "tftp $fdtaddr $fdtfile;"               \
 764         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 765
 766 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
 767
 768 #include <asm/fsl_secure_boot.h>
 769
 770 #endif  /* __CONFIG_H */