include/configs/dragonboard410c.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Board configuration file for Dragonboard 410C
   4  *
   5  * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
   6  */
   7
   8 #ifndef __CONFIGS_DRAGONBOARD410C_H
   9 #define __CONFIGS_DRAGONBOARD410C_H
  10
  11 #include <linux/sizes.h>
  12 #include <asm/arch/sysmap-apq8016.h>
  13
  14 /* Physical Memory Map */
  15 #define PHYS_SDRAM_1                    0x80000000
  16 /* 1008 MB (the last ~30Mb are secured for TrustZone by ATF*/
  17 #define PHYS_SDRAM_1_SIZE               0x3da00000
  18 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
  19 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
  20 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 0x80000)
  21 #define CONFIG_SYS_BOOTM_LEN            SZ_64M
  22
  23 /* UART */
  24
  25 /* Generic Timer Definitions */
  26 #define COUNTER_FREQUENCY               19000000
  27
  28 /* Fixup - in init code we switch from device to host mode,
  29  * it has to be done after each HCD reset */
  30 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  31
  32 /* BOOTP options */
  33 #define CONFIG_BOOTP_BOOTFILESIZE
  34
  35 #define BOOT_TARGET_DEVICES(func) \
  36         func(USB, usb, 0) \
  37         func(MMC, mmc, 1) \
  38         func(MMC, mmc, 0) \
  39         func(DHCP, dhcp, na)
  40
  41 #include <config_distro_bootcmd.h>
  42
  43 /* Does what recovery does */
  44 #define REFLASH(file, part) \
  45 "part start mmc 0 "#part" start && "\
  46 "part size mmc 0 "#part" size && "\
  47 "tftp $loadaddr "#file" && " \
  48 "mmc write $loadaddr $start $size && "
  49
  50 #define CONFIG_ENV_REFLASH \
  51 "mmc dev 0 && "\
  52 "usb start && "\
  53 "dhcp && "\
  54 "tftp $loadaddr dragonboard/rescue/gpt_both0.bin && "\
  55 "mmc write $loadaddr 0 43 && " \
  56 "mmc rescan && "\
  57 REFLASH(dragonboard/rescue/NON-HLOS.bin, 1)\
  58 REFLASH(dragonboard/rescue/sbl1.mbn, 2)\
  59 REFLASH(dragonboard/rescue/rpm.mbn, 3)\
  60 REFLASH(dragonboard/rescue/tz.mbn, 4)\
  61 REFLASH(dragonboard/rescue/hyp.mbn, 5)\
  62 REFLASH(dragonboard/rescue/sec.dat, 6)\
  63 REFLASH(dragonboard/rescue/emmc_appsboot.mbn, 7)\
  64 REFLASH(dragonboard/u-boot.img, 8)\
  65 "usb stop &&"\
  66 "echo Reflash completed"
  67
  68 /* Environment */
  69 #define CONFIG_EXTRA_ENV_SETTINGS \
  70         "reflash="CONFIG_ENV_REFLASH"\0"\
  71         "loadaddr=0x81000000\0" \
  72         "fdt_high=0xffffffffffffffff\0" \
  73         "initrd_high=0xffffffffffffffff\0" \
  74         "linux_image=Image\0" \
  75         "kernel_addr_r=0x81000000\0"\
  76         "fdtfile=qcom/apq8016-sbc.dtb\0" \
  77         "fdt_addr_r=0x83000000\0"\
  78         "ramdisk_addr_r=0x84000000\0"\
  79         "scriptaddr=0x90000000\0"\
  80         "pxefile_addr_r=0x90100000\0"\
  81         BOOTENV
  82
  83 #define CONFIG_ENV_SIZE                 0x2000
  84 #define CONFIG_SYS_MMC_ENV_DEV          0       /* mmc0 = emmc, mmc1 = sd */
  85 #define CONFIG_SYS_MMC_ENV_PART 2 /* Set env partition to BOOT2 partition */
  86
  87 /* Size of malloc() pool */
  88 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + SZ_8M)
  89
  90 /* Monitor Command Prompt */
  91 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
  92 #define CONFIG_SYS_MAXARGS              64      /* max command args */
  93
  94 #endif