include/configs/espt.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Configuation settings for the ESPT-GIGA board
   4  *
   5  * Copyright (C) 2008 Renesas Solutions Corp.
   6  * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
   7  */
   8
   9 #ifndef __ESPT_H
  10 #define __ESPT_H
  11
  12 #define CONFIG_CPU_SH7763       1
  13 #define __LITTLE_ENDIAN         1
  14
  15 #define CONFIG_ENV_OVERWRITE    1
  16
  17 #define CONFIG_DISPLAY_BOARDINFO
  18 #undef  CONFIG_SHOW_BOOT_PROGRESS
  19
  20 /* SCIF */
  21 #define CONFIG_CONS_SCIF0               1
  22
  23 #define CONFIG_SYS_PBSIZE               256     /* Buffer size for Console output */
  24 #define CONFIG_SYS_BAUDRATE_TABLE       { 115200 }      /* List of legal baudrate
  25                                                                                                 settings for this board */
  26
  27 /* SDRAM */
  28 #define CONFIG_SYS_SDRAM_BASE           (0x8C000000)
  29 #define CONFIG_SYS_SDRAM_SIZE           (64 * 1024 * 1024)
  30 #define CONFIG_SYS_MEMTEST_START        (CONFIG_SYS_SDRAM_BASE)
  31 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
  32
  33 /* Flash(NOR) S29JL064H */
  34 #define CONFIG_SYS_FLASH_BASE           (0xA0000000)
  35 #define CONFIG_SYS_FLASH_CFI_WIDTH (FLASH_CFI_16BIT)
  36 #define CONFIG_SYS_MAX_FLASH_BANKS (1)
  37 #define CONFIG_SYS_MAX_FLASH_SECT  (150)
  38
  39 /* U-Boot setting */
  40 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024)
  41 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE)
  42 #define CONFIG_SYS_MONITOR_LEN          (128 * 1024)
  43 /* Size of DRAM reserved for malloc() use */
  44 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)
  45 #define CONFIG_SYS_BOOTMAPSZ            (8 * 1024 * 1024)
  46
  47 #undef  CONFIG_SYS_FLASH_QUIET_TEST
  48 #define CONFIG_SYS_FLASH_EMPTY_INFO     /* print 'E' for empty sector on flinfo */
  49 /* Timeout for Flash erase operations (in ms) */
  50 #define CONFIG_SYS_FLASH_ERASE_TOUT     (3 * 1000)
  51 /* Timeout for Flash write operations (in ms) */
  52 #define CONFIG_SYS_FLASH_WRITE_TOUT     (3 * 1000)
  53 /* Timeout for Flash set sector lock bit operations (in ms) */
  54 #define CONFIG_SYS_FLASH_LOCK_TOUT              (3 * 1000)
  55 /* Timeout for Flash clear lock bit operations (in ms) */
  56 #define CONFIG_SYS_FLASH_UNLOCK_TOUT    (3 * 1000)
  57 /* Use hardware flash sectors protection instead of U-Boot software protection */
  58 #undef  CONFIG_SYS_DIRECT_FLASH_TFTP
  59 #define CONFIG_ENV_SECT_SIZE    (128 * 1024)
  60 #define CONFIG_ENV_SIZE         (CONFIG_ENV_SECT_SIZE)
  61 #define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE + (1 * CONFIG_ENV_SECT_SIZE))
  62 /* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */
  63 #define CONFIG_ENV_OFFSET               (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
  64 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SECT_SIZE)
  65 #define CONFIG_ENV_ADDR_REDUND  (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
  66
  67 /* Clock */
  68 #define CONFIG_SYS_CLK_FREQ     66666666
  69 #define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
  70
  71 /* Ether */
  72 #define CONFIG_SH_ETHER_USE_PORT (1)
  73 #define CONFIG_SH_ETHER_PHY_ADDR (0x00)
  74 #define CONFIG_BITBANGMII
  75 #define CONFIG_BITBANGMII_MULTI
  76 #define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_MII
  77
  78 #endif /* __SH7763RDP_H */