3 local tempfile
=/tmp
/remote-upgrade.img
4 local D2
='\([0-9]\{2\}\)'
5 local D4
='\([0-9]\{4\}\)'
11 opkg list_installed
'base-files-*' | \
12 sed -ne 's/base-files-\([^ ]\+\).*/\1/p'
19 if grep -q '"vmlinux.bin.l7"' /proc
/mtd
; then
20 echo "openwrt-fonera-combined.img"
22 echo "openwrt-ubiquity-combined.img"
26 echo "openwrt-brcm-2.4-squashfs.trx"
33 local file; for file in /lib
/upgrade
/*.sh
; do .
$file; done
34 if platform_check_image
"$1" >/dev
/null
2>/dev
/null
; then
40 find_remote_checksum
()
42 wget
-qO- ${1%/*}/md5sums
2>/dev
/null | \
43 sed -ne '/'$2'/ { s/ .*//p }'
48 set -- $
(md5sum "$tempfile")
54 wget
-qO- "${1%/*}/VERSION.txt" 2>/dev
/null
59 find_remote_info
"$1" | \
60 sed -ne "s!.*$D4/$D2/$D2 $D2:$D2.*!\\1\\2\\3\\4\\5!p;t"
65 if [ -f /rom
/etc
/banner ]; then
66 sed -ne "s!.*$D4/$D2/$D2 $D2:$D2.*!\\1\\2\\3\\4\\5!p;t" \
69 date +"%Y%m%d%H%M" -r /bin
/sh
75 [ -x /etc
/init.d
/$1 ] && {
76 echo -n "Stopping service $1 ... "
77 /etc
/init.d
/$1 stop
>/dev
/null
2>/dev
/null
84 if [ ${1:-0} -gt 0 ]; then
85 echo -n "${2:-Waiting} "
86 for i
in $
(seq 1 $1); do
87 printf "%-2dseconds" $
(($1-$i))
89 echo -en "\b\b\b\b\b\b\b\b\b"
100 while [ -n "$v1" -o -n "$v2" ]; do
101 if [ -z "${v2:0:4}" -o "${v1:0:4}" -gt "${v2:0:4}" ]; then
103 elif [ -z "${v1:0:4}" -o "${v1:0:4}" -lt "${v2:0:4}" ]; then
120 remote-update [-u <update url>] -c
121 remote-update [-v] [-y] [-u <update url>] -w
122 remote-update [-d] [-n] [-v] [-y] [-s <sleep seconds>] [-u <update url>]
125 -h Display this help message and exit.
126 -c Check for firmware update and exit.
127 -w Fetch image and exit, do not perform flash write.
130 -d Do not detach from terminal.
131 -n Do not backup configuration.
132 -v Skip verification of downloaded image.
133 -y Assume defaults for all questions.
136 Sleep given amount of seconds before starting flash write.
137 If ommitted and '-y' is not used, 5 seconds are assumed.
140 Fetch firmware image from given url. A file "md5sums" is expected
141 in the same remote directory. If there is no such file, use -v to
142 suppress verification.
150 while getopts "s:u:cdnvwyh" flag
; do
152 s
) sleeptime
="$OPTARG";;
153 u
) updateurl
="$OPTARG";;
165 local image_url
="$updateurl"
166 local image_name
="${image_url##*/}"
168 [ -z "$image_url" ] && {
169 local arch
=$
(find_architecture
)
170 local image
=$
(find_image
"$arch")
171 local repo
=$
(uci get freifunk.upgrade.repository
2>/dev
/null
)
174 echo "Can not determine the current architecture."
179 echo "No repository configured in 'freifunk.upgrade.repository'."
180 echo "Use the '-u' flag to specify an image location."
185 echo "No suitable image for the '$arch' architecture."
186 echo "Your platform is not supported."
190 echo "Architecture: $arch"
191 echo "Repository: $repo"
194 image_url
="${repo%/}/$arch/$image"
198 if [ "$checkupdate" = 1 ]; then
199 local v1
=$
(find_local_version
)
200 local v2
=$
(find_remote_version
"$image_url")
202 [ -n "$v1" -a -n "$v2" ] && {
203 version_compare
"$v1" "$v2"
205 echo "Update available!${NL}Local: $v1${NL}Remote: $v2${NL}--"
206 find_remote_info
"$image_url"
209 echo "Local version $v1 is up to date"
213 echo "No remote time stamp found."
217 if [ "$noquestions" != 1 ]; then
218 echo -n "${NL}About to download $image_name. Continue? [y] "
225 echo -n "Downloading $image_name ... "
227 wget
-qO $tempfile "$image_url" 2>/dev
/null
228 [ $?
== 0 ] && echo done ||
{
234 if [ "$noverify" != 1 ]; then
235 echo -n "Verifying $image_name ... "
237 local md5_remote
=$
(find_remote_checksum
"$image_url" "$image_name")
238 local md5_local
=$
(find_local_checksum
)
240 check_image
"$tempfile"
243 if [ $image_ok = 0 -a -n "$md5_remote" -a -n "$md5_local" -a "$md5_remote" = "$md5_local" ]; then
246 if [ $image_ok != 0 ]; then
247 echo "unsupported image type"
249 echo "checksum mismatch! (local:${md5_local:-(none)} remote:${md5_remote:-(none)})"
253 if [ "$noquestions" != 1 ]; then
254 echo -n "${NL}Verification failed. Continue anyway? [n] "
269 if [ "$noflash" != 1 ]; then
270 if [ -f "$tempfile" ]; then
271 if [ "$noquestions" == 1 ]; then
272 do_wait
${sleeptime:-5} "${NL}About to start flashing, hit <Ctrl-C> to abort!${NL}${NL}Starting
in"
274 if [ -z "$nobackup" ]; then
275 echo -n "${NL}Keep configuration files?
[y
] "
282 echo -n "${NL}About to start flashing!${NL}Hit <Enter> to continue or <Ctrl-C> to abort.${NL}"
286 for s in lucid collectd; do stop_service $s; done
288 if [ "$nodetach" != 1 ]; then
289 echo -n "Starting sysupgrade
in background ...
"
290 /bin/busybox start-stop-daemon -S -b -x /sbin/sysupgrade -- ${nobackup:+-n} "$tempfile"
293 echo "Executing sysupgrade ...
"
294 exec /sbin/sysupgrade ${nobackup:+-n} "$tempfile"
297 echo "No upgrade image found
!"
301 echo "Image saved
in '$tempfile'"