2 +++ b/configs/mt7986_zyxel_ex5601-t0_defconfig
5 +CONFIG_POSITION_INDEPENDENT=y
6 +CONFIG_ARCH_MEDIATEK=y
7 +CONFIG_TARGET_MT7986=y
8 +CONFIG_TEXT_BASE=0x41e00000
9 +CONFIG_SYS_MALLOC_F_LEN=0x4000
10 +CONFIG_SYS_HAS_NONCACHED_MEMORY=y
11 +CONFIG_NR_DRAM_BANKS=1
12 +CONFIG_DEFAULT_DEVICE_TREE="mt7986a-zyxel_ex5601-t0"
13 +CONFIG_DEFAULT_ENV_FILE="zyxel_ex5601-t0_env"
14 +CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-zyxel_ex5601-t0.dtb"
15 +CONFIG_OF_LIBFDT_OVERLAY=y
16 +CONFIG_DEBUG_UART_BASE=0x11002000
17 +CONFIG_DEBUG_UART_CLOCK=40000000
19 +CONFIG_SYS_LOAD_ADDR=0x46000000
20 +CONFIG_SMBIOS_PRODUCT_NAME=""
21 +CONFIG_AUTOBOOT_KEYED=y
23 +CONFIG_AUTOBOOT_MENU_SHOW=y
24 +CONFIG_CFB_CONSOLE_ANSI=y
25 +CONFIG_BOARD_LATE_INIT=y
29 +CONFIG_CMD_ENV_FLAGS=y
31 +CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
37 +CONFIG_SYS_PROMPT="EX5601> "
38 +CONFIG_CMD_BOOTMENU=y
48 +CONFIG_CMD_ENV_READMEM=y
49 +CONFIG_CMD_ERASEENV=y
53 +CONFIG_CMD_FS_GENERIC=y
61 +CONFIG_CMD_LINK_LOCAL=y
62 +# CONFIG_CMD_MBR is not set
66 +CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
72 +CONFIG_CMD_TFTPBOOT=y
75 +CONFIG_CMD_UBI_RENAME=y
86 +# CONFIG_CMD_FLASH is not set
88 +CONFIG_DISPLAY_CPUINFO=y
90 +CONFIG_DM_REGULATOR=y
91 +CONFIG_DM_REGULATOR_FIXED=y
92 +CONFIG_DM_REGULATOR_GPIO=y
97 +CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
98 +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
99 +CONFIG_VERSION_VARIABLE=y
100 +CONFIG_PARTITION_UUIDS=y
113 +CONFIG_PHY_MTK_TPHY=y
117 +CONFIG_MEDIATEK_ETH=y
120 +CONFIG_PCIE_MEDIATEK=y
121 +# CONFIG_MMC is not set
122 +# CONFIG_DM_MMC is not set
124 +CONFIG_MTD_UBI_FASTMAP=y
125 +# CONFIG_DM_PCI is not set
126 +# CONFIG_PCIE_MEDIATEK is not set
129 +CONFIG_PINCTRL_MT7622=y
130 +CONFIG_POWER_DOMAIN=y
131 +CONFIG_PRE_CONSOLE_BUFFER=y
132 +CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
133 +CONFIG_MTK_POWER_DOMAIN=y
138 +# CONFIG_I2C is not set
140 +CONFIG_MTK_SPI_NAND=y
141 +CONFIG_MTK_SPI_NAND_MTD=y
142 +CONFIG_SYSRESET_WATCHDOG=y
147 +CONFIG_RANDOM_UUID=y
151 +CONFIG_USB_XHCI_HCD=y
152 +CONFIG_USB_XHCI_MTK=y
153 +CONFIG_USB_STORAGE=y
155 +CONFIG_ENV_OVERWRITE=y
156 +CONFIG_ENV_IS_IN_UBI=y
157 +CONFIG_ENV_UBI_PART="ubi"
158 +CONFIG_ENV_SIZE=0x1f000
159 +CONFIG_ENV_SIZE_REDUND=0x1f000
160 +CONFIG_ENV_UBI_VOLUME="ubootenv"
161 +CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
162 +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
163 +CONFIG_NET_RANDOM_ETHADDR=y
169 +CONFIG_MEDIATEK_ETH=y
172 +CONFIG_PINCTRL_MT7986=y
173 +CONFIG_POWER_DOMAIN=y
174 +CONFIG_MTK_POWER_DOMAIN=y
175 +CONFIG_DM_REGULATOR=y
176 +CONFIG_DM_REGULATOR_FIXED=y
180 +CONFIG_USE_DEFAULT_ENV_FILE=y
181 +CONFIG_MTD_SPI_NAND=y
184 +CONFIG_CMD_NAND_TRIMFFS=y
185 +CONFIG_LMB_MAX_REGIONS=64
187 +CONFIG_IPADDR="192.168.1.1"
188 +CONFIG_USE_SERVERIP=y
189 +CONFIG_SERVERIP="192.168.1.254"
191 +++ b/arch/arm/dts/mt7986a-zyxel_ex5601-t0.dts
193 +// SPDX-License-Identifier: GPL-2.0
195 + * Author: Valerio 'ftp21' Mancini <ftp21@ftp21.eu>
196 + * Author: Nicolò Veronese <nicveronese@gmail.com>
200 +#include <dt-bindings/input/linux-event-codes.h>
201 +#include "mt7986.dtsi"
202 +#include <dt-bindings/gpio/gpio.h>
205 + #address-cells = <1>;
207 + model = "Zyxel EX5601-T0 ubootmod";
208 + compatible = "mediatek,mt7986", "mediatek,mt7986-sd-rfb";
211 + stdout-path = &uart0;
212 + tick-timer = &timer0;
216 + device_type = "memory";
217 + reg = <0x40000000 0x20000000>;
221 + compatible = "gpio-keys";
224 + gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
225 + linux,code = <KEY_RESTART>;
230 + gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
231 + linux,code = <KEY_WPS_BUTTON>;
236 + compatible = "gpio-leds";
238 + led_status_green: pwr {
239 + label = "green:status";
240 + gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
241 + default-state = "off";
244 + led_sfp_green: sfp {
245 + label = "green:sfp";
246 + gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
247 + default-state = "off";
253 + mediatek,force-highspeed;
258 + pinctrl-names = "default";
259 + pinctrl-0 = <&uart1_pins>;
260 + status = "disabled";
265 + mediatek,gmac-id = <0>;
266 + phy-mode = "2500base-x";
267 + mediatek,switch = "mt7531";
268 + reset-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
277 + spic_pins: spi1-pins-func-1 {
284 + uart1_pins: spi1-pins-func-3 {
287 + groups = "uart1_2";
291 + spi_flash_pins: spi0-pins-func-1 {
293 + function = "flash";
294 + groups = "spi0", "spi0_wp_hold";
298 + pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
299 + drive-strength = <MTK_DRIVE_8mA>;
300 + bias-pull-up = <MTK_PUPD_SET_R1R0_00>;
304 + pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
305 + drive-strength = <MTK_DRIVE_8mA>;
306 + bias-pull-down = <MTK_PUPD_SET_R1R0_00>;
312 + #address-cells = <1>;
314 + pinctrl-names = "default";
315 + pinctrl-0 = <&spi_flash_pins>;
326 + compatible = "spi-nand";
328 + spi-max-frequency = <20000000>;
329 + spi-tx-buswidth = <4>;
330 + spi-rx-buswidth = <4>;
333 + compatible = "fixed-partitions";
334 + #address-cells = <1>;
339 + reg = <0x0 0x100000>;
343 + label = "u-boot-env";
344 + reg = <0x0100000 0x0080000>;
349 + reg = <0x180000 0x0200000>;
354 + reg = <0x380000 0x0200000>;
359 + reg = <0x540000 0x0040000>;
364 + reg = <0x580000 0x1da80000>;
371 + status = "disabled";
375 +++ b/zyxel_ex5601-t0_env
377 +ethaddr_factory=mtd read Factory 0x40080000 0x0 0x20000 && env readmem -b ethaddr 0x4008002A 0x6 ; setenv ethaddr_factory
379 +serverip=192.168.1.254
381 +console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
382 +bootargs=console=ttyS0,115200n8 console_msg_format=syslog
383 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
386 +bootfile=openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-initramfs-recovery.itb
387 +bootfile_bl2=openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-preloader.bin
388 +bootfile_fip=openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-bl31-uboot.fip
389 +bootfile_upg=openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-squashfs-sysupgrade.itb
390 +bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
393 +bootmenu_title=
\e[0;34m( ( (
\e[1;39mOpenWrt
\e[0;34m ) ) )
394 +bootmenu_0=Initialize environment.=run _firstboot
395 +bootmenu_0d=Run default boot command.=run boot_default
396 +bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
397 +bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
398 +bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
399 +bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
400 +bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
401 +bootmenu_6=
\e[31mLoad BL31+U-Boot FIP via TFTP then write to NAND.
\e[0m=run boot_tftp_write_fip ; run bootmenu_confirm_return
402 +bootmenu_7=
\e[31mLoad BL2 preloader via TFTP then write to NAND.
\e[0m=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
403 +bootmenu_8=Reboot.=reset
404 +bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
405 +boot_first=if button reset ; then run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
406 +boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
407 +boot_production=run ubi_read_production && bootm $loadaddr#$bootconf
408 +boot_recovery=run ubi_read_recovery && bootm $loadaddr#$bootconf
409 +boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever
410 +boot_tftp_forever=while true ; do run boot_tftp_recovery ; sleep 1 ; done
411 +boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
412 +boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
413 +boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
414 +boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
415 +boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
417 +reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
418 +mtd_write_fip=mtd erase fip && mtd write fip $loadaddr
419 +mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr
420 +ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic 0 ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic 1
421 +ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset
422 +ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
423 +ubi_read_production=ubi read $loadaddr $part_fit && iminfo $loadaddr && run ubi_prepare_rootfs
424 +ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
425 +ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
426 +ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize
427 +ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize
428 +_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
429 +_firstboot=setenv _firstboot ; run ethaddr_factory ; run _switch_to_menu ; run _init_env ; run boot_first
430 +_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
431 +_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title
\e[33m$ver
\e[0m"