2 # Copyright (C) 2006-2015 OpenWrt.org
4 # This is free software, licensed under the GNU General Public License v2.
5 # See /LICENSE for more information.
8 OTHER_MENU
:=Other modules
10 WATCHDOG_DIR
:=watchdog
13 define KernelPackage
/6lowpan
14 SUBMENU
:=$(OTHER_MENU
)
15 TITLE
:=6LoWPAN shared code
19 FILES
:=$(LINUX_DIR
)/net
/6lowpan
/6lowpan.ko
20 AUTOLOAD
:=$(call AutoProbe
,6lowpan
)
23 define KernelPackage
/6lowpan
/description
24 Shared
6lowpan code for IEEE
802.15.4 and Bluetooth.
27 $(eval
$(call KernelPackage
,6lowpan
))
30 define KernelPackage
/bluetooth
31 SUBMENU
:=$(OTHER_MENU
)
32 TITLE
:=Bluetooth support
33 DEPENDS
:=@USB_SUPPORT
+kmod-usb-core
+kmod-crypto-hash
+kmod-crypto-ecb
+kmod-lib-crc16
+kmod-hid
+kmod-crypto-cmac
+kmod-regmap-core
+kmod-crypto-ecdh
42 CONFIG_BT_HCIBTUSB_BCM
=n \
44 CONFIG_BT_HCIUART_BCM
=n \
45 CONFIG_BT_HCIUART_INTEL
=n \
46 CONFIG_BT_HCIUART_H4 \
47 CONFIG_BT_HCIUART_NOKIA
=n \
49 $(call AddDepends
/rfkill
)
51 $(LINUX_DIR
)/net
/bluetooth
/bluetooth.ko \
52 $(LINUX_DIR
)/net
/bluetooth
/rfcomm
/rfcomm.ko \
53 $(LINUX_DIR
)/net
/bluetooth
/bnep
/bnep.ko \
54 $(LINUX_DIR
)/net
/bluetooth
/hidp
/hidp.ko \
55 $(LINUX_DIR
)/drivers
/bluetooth
/hci_uart.ko \
56 $(LINUX_DIR
)/drivers
/bluetooth
/btusb.ko \
57 $(LINUX_DIR
)/drivers
/bluetooth
/btintel.ko
58 AUTOLOAD
:=$(call AutoProbe
,bluetooth rfcomm bnep hidp hci_uart btusb
)
61 define KernelPackage
/bluetooth
/description
62 Kernel support for Bluetooth devices
65 $(eval
$(call KernelPackage
,bluetooth
))
67 define KernelPackage
/ath3k
68 SUBMENU
:=$(OTHER_MENU
)
69 TITLE
:=ATH3K Kernel Module support
70 DEPENDS
:=+kmod-bluetooth
+ar3k-firmware
73 CONFIG_BT_HCIUART_ATH3K
=y
74 $(call AddDepends
/bluetooth
)
76 $(LINUX_DIR
)/drivers
/bluetooth
/ath3k.ko
77 AUTOLOAD
:=$(call AutoProbe
,ath3k
)
80 define KernelPackage
/ath3k
/description
81 Kernel support for ATH3K Module
84 $(eval
$(call KernelPackage
,ath3k
))
87 define KernelPackage
/bluetooth-6lowpan
88 SUBMENU
:=$(OTHER_MENU
)
89 TITLE
:=Bluetooth
6LoWPAN support
90 DEPENDS
:=+kmod-6lowpan
+kmod-bluetooth
91 KCONFIG
:=CONFIG_BT_6LOWPAN
92 FILES
:=$(LINUX_DIR
)/net
/bluetooth
/bluetooth_6lowpan.ko
93 AUTOLOAD
:=$(call AutoProbe
,bluetooth_6lowpan
)
96 define KernelPackage
/bluetooth-6lowpan
/description
97 Kernel support for
6LoWPAN over Bluetooth Low Energy devices
100 $(eval
$(call KernelPackage
,bluetooth-6lowpan
))
103 define KernelPackage
/btmrvl
104 SUBMENU
:=$(OTHER_MENU
)
105 TITLE
:=Marvell Bluetooth Kernel Module support
106 DEPENDS
:=+kmod-mmc
+kmod-bluetooth
+mwifiex-sdio-firmware
110 $(call AddDepends
/bluetooth
)
112 $(LINUX_DIR
)/drivers
/bluetooth
/btmrvl.ko \
113 $(LINUX_DIR
)/drivers
/bluetooth
/btmrvl_sdio.ko
114 AUTOLOAD
:=$(call AutoProbe
,btmrvl btmrvl_sdio
)
117 define KernelPackage
/btmrvl
/description
118 Kernel support for Marvell SDIO Bluetooth Module
121 $(eval
$(call KernelPackage
,btmrvl
))
124 define KernelPackage
/dma-buf
125 SUBMENU
:=$(OTHER_MENU
)
126 TITLE
:=DMA shared buffer support
128 KCONFIG
:=CONFIG_DMA_SHARED_BUFFER
129 ifeq ($(strip $(CONFIG_EXTERNAL_KERNEL_TREE
)),"")
130 ifeq ($(strip $(CONFIG_KERNEL_GIT_CLONE_URI
)),"")
131 FILES
:=$(LINUX_DIR
)/drivers
/dma-buf
/dma-shared-buffer.ko
134 AUTOLOAD
:=$(call AutoLoad
,20,dma-shared-buffer
)
136 $(eval
$(call KernelPackage
,dma-buf
))
139 define KernelPackage
/nvmem
140 SUBMENU
:=$(OTHER_MENU
)
141 TITLE
:=Non Volatile Memory support
143 KCONFIG
:=CONFIG_NVMEM
145 FILES
:=$(LINUX_DIR
)/drivers
/nvmem
/nvmem_core.ko
148 define KernelPackage
/nvmem
/description
149 Support for NVMEM
(Non Volatile Memory
) devices like EEPROM
, EFUSES
, etc.
152 $(eval
$(call KernelPackage
,nvmem
))
154 define KernelPackage
/eeprom-93cx6
155 SUBMENU
:=$(OTHER_MENU
)
156 TITLE
:=EEPROM
93CX6 support
157 KCONFIG
:=CONFIG_EEPROM_93CX6
158 FILES
:=$(LINUX_DIR
)/drivers
/misc
/eeprom
/eeprom_93cx6.ko
159 AUTOLOAD
:=$(call AutoLoad
,20,eeprom_93cx6
)
162 define KernelPackage
/eeprom-93cx6
/description
163 Kernel module for EEPROM
93CX6 support
166 $(eval
$(call KernelPackage
,eeprom-93cx6
))
169 define KernelPackage
/eeprom-at24
170 SUBMENU
:=$(OTHER_MENU
)
171 TITLE
:=EEPROM AT24 support
172 KCONFIG
:=CONFIG_EEPROM_AT24
173 DEPENDS
:=+kmod-i2c-core
+!LINUX_5_4
:kmod-nvmem
+!LINUX_4_14
:kmod-regmap-i2c
174 FILES
:=$(LINUX_DIR
)/drivers
/misc
/eeprom
/at24.ko
175 AUTOLOAD
:=$(call AutoProbe
,at24
)
178 define KernelPackage
/eeprom-at24
/description
179 Kernel module for most I2C EEPROMs
182 $(eval
$(call KernelPackage
,eeprom-at24
))
185 define KernelPackage
/eeprom-at25
186 SUBMENU
:=$(OTHER_MENU
)
187 TITLE
:=EEPROM AT25 support
188 KCONFIG
:=CONFIG_EEPROM_AT25
189 DEPENDS
:=+!LINUX_5_4
:kmod-nvmem
190 FILES
:=$(LINUX_DIR
)/drivers
/misc
/eeprom
/at25.ko
191 AUTOLOAD
:=$(call AutoProbe
,at25
)
194 define KernelPackage
/eeprom-at25
/description
195 Kernel module for most SPI EEPROMs
198 $(eval
$(call KernelPackage
,eeprom-at25
))
201 define KernelPackage
/gpio-dev
202 SUBMENU
:=$(OTHER_MENU
)
203 TITLE
:=Generic GPIO char device support
204 DEPENDS
:=@GPIO_SUPPORT
205 KCONFIG
:=CONFIG_GPIO_DEVICE
206 FILES
:=$(LINUX_DIR
)/drivers
/char
/gpio_dev.ko
207 AUTOLOAD
:=$(call AutoLoad
,40,gpio_dev
)
210 define KernelPackage
/gpio-dev
/description
211 Kernel module to allows control of GPIO pins using a character device.
214 $(eval
$(call KernelPackage
,gpio-dev
))
217 define KernelPackage
/gpio-f7188x
218 SUBMENU
:=$(OTHER_MENU
)
219 TITLE
:=Fintek F718xx
/F818xx GPIO Support
220 DEPENDS
:=@GPIO_SUPPORT @TARGET_x86
221 KCONFIG
:=CONFIG_GPIO_F7188X
222 FILES
:=$(LINUX_DIR
)/drivers
/gpio
/gpio-f7188x.ko
223 AUTOLOAD
:=$(call AutoProbe
,gpio-f7188x
)
226 define KernelPackage
/gpio-f7188x
/description
227 Kernel module for the GPIOs found on many Fintek Super-IO chips.
230 $(eval
$(call KernelPackage
,gpio-f7188x
))
233 define KernelPackage
/gpio-mcp23s08
234 SUBMENU
:=$(OTHER_MENU
)
235 TITLE
:=Microchip MCP23xxx I
/O expander
236 DEPENDS
:=@GPIO_SUPPORT
+kmod-i2c-core
+kmod-regmap-i2c
238 CONFIG_GPIO_MCP23S08 \
239 CONFIG_PINCTRL_MCP23S08
241 $(LINUX_DIR
)/drivers
/pinctrl
/pinctrl-mcp23s08.ko
242 AUTOLOAD
:=$(call AutoLoad
,40,pinctrl-mcp23s08
)
245 define KernelPackage
/gpio-mcp23s08
/description
246 Kernel module for Microchip MCP23xxx SPI
/I2C I
/O expander
249 $(eval
$(call KernelPackage
,gpio-mcp23s08
))
252 define KernelPackage
/gpio-nxp-74hc164
253 SUBMENU
:=$(OTHER_MENU
)
254 TITLE
:=NXP
74HC164 GPIO expander support
255 KCONFIG
:=CONFIG_GPIO_74X164
256 FILES
:=$(LINUX_DIR
)/drivers
/gpio
/gpio-74x164.ko
257 AUTOLOAD
:=$(call AutoProbe
,gpio-74x164
)
260 define KernelPackage
/gpio-nxp-74hc164
/description
261 Kernel module for NXP
74HC164 GPIO expander
264 $(eval
$(call KernelPackage
,gpio-nxp-74hc164
))
266 define KernelPackage
/gpio-pca953x
267 SUBMENU
:=$(OTHER_MENU
)
268 DEPENDS
:=@GPIO_SUPPORT
+kmod-i2c-core
+LINUX_5_4
:kmod-regmap-i2c
269 TITLE
:=PCA95xx
, TCA64xx
, and MAX7310 I
/O ports
270 KCONFIG
:=CONFIG_GPIO_PCA953X
271 FILES
:=$(LINUX_DIR
)/drivers
/gpio
/gpio-pca953x.ko
272 AUTOLOAD
:=$(call AutoLoad
,55,gpio-pca953x
)
275 define KernelPackage
/gpio-pca953x
/description
276 Kernel module for MAX731
{0,2,3,5}, PCA6107
, PCA953
{4-9}, PCA955
{4-7},
277 PCA957
{4,5} and TCA64
{08,16} I2C GPIO expanders
280 $(eval
$(call KernelPackage
,gpio-pca953x
))
282 define KernelPackage
/gpio-pcf857x
283 SUBMENU
:=$(OTHER_MENU
)
284 DEPENDS
:=@GPIO_SUPPORT
+kmod-i2c-core
285 TITLE
:=PCX857x
, PCA967x and MAX732X I2C GPIO expanders
286 KCONFIG
:=CONFIG_GPIO_PCF857X
287 FILES
:=$(LINUX_DIR
)/drivers
/gpio
/gpio-pcf857x.ko
288 AUTOLOAD
:=$(call AutoLoad
,55,gpio-pcf857x
)
291 define KernelPackage
/gpio-pcf857x
/description
292 Kernel module for PCF857x
, PCA
{85,96}7x
, and MAX732
[89] I2C GPIO expanders
295 $(eval
$(call KernelPackage
,gpio-pcf857x
))
298 define KernelPackage
/ppdev
299 SUBMENU
:=$(OTHER_MENU
)
300 TITLE
:=Parallel port support
305 $(LINUX_DIR
)/drivers
/parport
/parport.ko \
306 $(LINUX_DIR
)/drivers
/char
/ppdev.ko
307 AUTOLOAD
:=$(call AutoLoad
,50,parport ppdev
)
310 $(eval
$(call KernelPackage
,ppdev
))
313 define KernelPackage
/parport-pc
314 SUBMENU
:=$(OTHER_MENU
)
315 TITLE
:=Parallel port interface
(PC-style
) support
320 CONFIG_PARPORT_1284
=y \
321 CONFIG_PARPORT_PC_FIFO
=y \
322 CONFIG_PARPORT_PC_PCMCIA
=n \
323 CONFIG_PARPORT_PC_SUPERIO
=y \
324 CONFIG_PARPORT_SERIAL
=n \
329 $(LINUX_DIR
)/drivers
/parport
/parport_pc.ko
330 AUTOLOAD
:=$(call AutoLoad
,51,parport_pc
)
333 $(eval
$(call KernelPackage
,parport-pc
))
336 define KernelPackage
/lp
337 SUBMENU
:=$(OTHER_MENU
)
338 TITLE
:=Parallel port line printer device support
343 $(LINUX_DIR
)/drivers
/char
/lp.ko
344 AUTOLOAD
:=$(call AutoLoad
,52,lp
)
347 $(eval
$(call KernelPackage
,lp
))
350 define KernelPackage
/mmc
351 SUBMENU
:=$(OTHER_MENU
)
352 TITLE
:=MMC
/SD Card Support
353 DEPENDS
:=@
!TARGET_uml
358 CONFIG_MMC_UNSAFE_RESUME
=n \
359 CONFIG_MMC_BLOCK_BOUNCE
=y \
360 CONFIG_MMC_TIFM_SD
=n \
364 $(LINUX_DIR
)/drivers
/mmc
/core
/mmc_core.ko \
365 $(LINUX_DIR
)/drivers
/mmc
/core
/mmc_block.ko
366 AUTOLOAD
:=$(call AutoProbe
,mmc_core mmc_block
,1)
369 define KernelPackage
/mmc
/description
370 Kernel support for MMC
/SD cards
373 $(eval
$(call KernelPackage
,mmc
))
376 define KernelPackage
/sdhci
377 SUBMENU
:=$(OTHER_MENU
)
378 TITLE
:=Secure Digital Host Controller Interface support
382 CONFIG_MMC_SDHCI_PLTFM \
383 CONFIG_MMC_SDHCI_PCI
=n
385 $(LINUX_DIR
)/drivers
/mmc
/host
/sdhci.ko \
386 $(LINUX_DIR
)/drivers
/mmc
/host
/sdhci-pltfm.ko
388 AUTOLOAD
:=$(call AutoProbe
,sdhci-pltfm
,1)
391 define KernelPackage
/sdhci
/description
392 Kernel support for SDHCI Hosts
395 $(eval
$(call KernelPackage
,sdhci
))
398 define KernelPackage
/rfkill
399 SUBMENU
:=$(OTHER_MENU
)
400 TITLE
:=RF switch subsystem support
401 DEPENDS
:=@USE_RFKILL
+kmod-input-core
404 CONFIG_RFKILL_INPUT
=y \
407 $(LINUX_DIR
)/net
/rfkill
/rfkill.ko
408 AUTOLOAD
:=$(call AutoLoad
,20,rfkill
)
411 define KernelPackage
/rfkill
/description
412 Say Y here if you want to have control over RF switches
413 found on many WiFi and Bluetooth cards
416 $(eval
$(call KernelPackage
,rfkill
))
419 define KernelPackage
/softdog
420 SUBMENU
:=$(OTHER_MENU
)
421 TITLE
:=Software watchdog driver
422 KCONFIG
:=CONFIG_SOFT_WATCHDOG \
423 CONFIG_SOFT_WATCHDOG_PRETIMEOUT
=n
424 FILES
:=$(LINUX_DIR
)/drivers
/$(WATCHDOG_DIR
)/softdog.ko
425 AUTOLOAD
:=$(call AutoLoad
,50,softdog
,1)
428 define KernelPackage
/softdog
/description
429 Software watchdog driver
432 $(eval
$(call KernelPackage
,softdog
))
435 define KernelPackage
/ssb
436 SUBMENU
:=$(OTHER_MENU
)
437 TITLE
:=Silicon Sonics Backplane glue code
438 DEPENDS
:=@PCI_SUPPORT @
!TARGET_bcm47xx @
!TARGET_bcm63xx
441 CONFIG_SSB_B43_PCI_BRIDGE
=y \
442 CONFIG_SSB_DRIVER_MIPS
=n \
443 CONFIG_SSB_DRIVER_PCICORE
=y \
444 CONFIG_SSB_DRIVER_PCICORE_POSSIBLE
=y \
445 CONFIG_SSB_PCIHOST
=y \
446 CONFIG_SSB_PCIHOST_POSSIBLE
=y \
447 CONFIG_SSB_POSSIBLE
=y \
450 FILES
:=$(LINUX_DIR
)/drivers
/ssb
/ssb.ko
451 AUTOLOAD
:=$(call AutoLoad
,18,ssb
,1)
454 define KernelPackage
/ssb
/description
455 Silicon Sonics Backplane glue code.
458 $(eval
$(call KernelPackage
,ssb
))
461 define KernelPackage
/bcma
462 SUBMENU
:=$(OTHER_MENU
)
464 DEPENDS
:=@PCI_SUPPORT @
!TARGET_bcm47xx @
!TARGET_bcm53xx
467 CONFIG_BCMA_POSSIBLE
=y \
468 CONFIG_BCMA_BLOCKIO
=y \
469 CONFIG_BCMA_HOST_PCI_POSSIBLE
=y \
470 CONFIG_BCMA_HOST_PCI
=y \
471 CONFIG_BCMA_HOST_SOC
=n \
472 CONFIG_BCMA_DRIVER_MIPS
=n \
473 CONFIG_BCMA_DRIVER_PCI_HOSTMODE
=n \
474 CONFIG_BCMA_DRIVER_GMAC_CMN
=n \
476 FILES
:=$(LINUX_DIR
)/drivers
/bcma
/bcma.ko
477 AUTOLOAD
:=$(call AutoLoad
,29,bcma
)
480 define KernelPackage
/bcma
/description
481 Bus driver for Broadcom specific Advanced Microcontroller Bus Architecture
484 $(eval
$(call KernelPackage
,bcma
))
487 define KernelPackage
/rtc-ds1307
488 SUBMENU
:=$(OTHER_MENU
)
489 TITLE
:=Dallas
/Maxim DS1307
(and compatible
) RTC support
490 DEFAULT
:=m if ALL_KMODS
&& RTC_SUPPORT
491 DEPENDS
:=+kmod-i2c-core
+kmod-regmap-i2c
+kmod-hwmon-core
492 KCONFIG
:=CONFIG_RTC_DRV_DS1307 \
494 FILES
:=$(LINUX_DIR
)/drivers
/rtc
/rtc-ds1307.ko
495 AUTOLOAD
:=$(call AutoProbe
,rtc-ds1307
)
498 define KernelPackage
/rtc-ds1307
/description
499 Kernel module for Dallas
/Maxim DS1307
/DS1337
/DS1338
/DS1340
/DS1388
/DS3231
,
500 Epson RX-8025 and various other compatible RTC chips connected via I2C.
503 $(eval
$(call KernelPackage
,rtc-ds1307
))
506 define KernelPackage
/rtc-ds1374
507 SUBMENU
:=$(OTHER_MENU
)
508 TITLE
:=Dallas
/Maxim DS1374 RTC support
509 DEFAULT
:=m if ALL_KMODS
&& RTC_SUPPORT
510 DEPENDS
:=+kmod-i2c-core
511 KCONFIG
:=CONFIG_RTC_DRV_DS1374 \
512 CONFIG_RTC_DRV_DS1374_WDT
=n \
514 FILES
:=$(LINUX_DIR
)/drivers
/rtc
/rtc-ds1374.ko
515 AUTOLOAD
:=$(call AutoProbe
,rtc-ds1374
)
518 define KernelPackage
/rtc-ds1374
/description
519 Kernel module for Dallas
/Maxim DS1374.
522 $(eval
$(call KernelPackage
,rtc-ds1374
))
525 define KernelPackage
/rtc-ds1672
526 SUBMENU
:=$(OTHER_MENU
)
527 TITLE
:=Dallas
/Maxim DS1672 RTC support
528 DEFAULT
:=m if ALL_KMODS
&& RTC_SUPPORT
529 DEPENDS
:=+kmod-i2c-core
530 KCONFIG
:=CONFIG_RTC_DRV_DS1672 \
532 FILES
:=$(LINUX_DIR
)/drivers
/rtc
/rtc-ds1672.ko
533 AUTOLOAD
:=$(call AutoProbe
,rtc-ds1672
)
536 define KernelPackage
/rtc-ds1672
/description
537 Kernel module for Dallas
/Maxim DS1672 RTC.
540 $(eval
$(call KernelPackage
,rtc-ds1672
))
543 define KernelPackage
/rtc-em3027
544 SUBMENU
:=$(OTHER_MENU
)
545 TITLE
:=Microelectronic EM3027 RTC support
546 DEFAULT
:=m if ALL_KMODS
&& RTC_SUPPORT
547 DEPENDS
:=+kmod-i2c-core
548 KCONFIG
:=CONFIG_RTC_DRV_EM3027 \
550 FILES
:=$(LINUX_DIR
)/drivers
/rtc
/rtc-em3027.ko
551 AUTOLOAD
:=$(call AutoProbe
,rtc-em3027
)
554 define KernelPackage
/rtc-em3027
/description
555 Kernel module for Microelectronic EM3027 RTC.
558 $(eval
$(call KernelPackage
,rtc-em3027
))
561 define KernelPackage
/rtc-isl1208
562 SUBMENU
:=$(OTHER_MENU
)
563 TITLE
:=Intersil ISL1208 RTC support
564 DEFAULT
:=m if ALL_KMODS
&& RTC_SUPPORT
565 DEPENDS
:=+kmod-i2c-core
566 KCONFIG
:=CONFIG_RTC_DRV_ISL1208 \
568 FILES
:=$(LINUX_DIR
)/drivers
/rtc
/rtc-isl1208.ko
569 AUTOLOAD
:=$(call AutoProbe
,rtc-isl1208
)
572 define KernelPackage
/rtc-isl1208
/description
573 Kernel module for Intersil ISL1208 RTC.
576 $(eval
$(call KernelPackage
,rtc-isl1208
))
579 define KernelPackage
/rtc-pcf8563
580 SUBMENU
:=$(OTHER_MENU
)
581 TITLE
:=Philips PCF8563
/Epson RTC8564 RTC support
582 DEFAULT
:=m if ALL_KMODS
&& RTC_SUPPORT
583 DEPENDS
:=+kmod-i2c-core
584 KCONFIG
:=CONFIG_RTC_DRV_PCF8563 \
586 FILES
:=$(LINUX_DIR
)/drivers
/rtc
/rtc-pcf8563.ko
587 AUTOLOAD
:=$(call AutoProbe
,rtc-pcf8563
)
590 define KernelPackage
/rtc-pcf8563
/description
591 Kernel module for Philips PCF8563 RTC chip.
592 The Epson RTC8564 should work
as well.
595 $(eval
$(call KernelPackage
,rtc-pcf8563
))
598 define KernelPackage
/rtc-pcf2123
599 SUBMENU
:=$(OTHER_MENU
)
600 TITLE
:=Philips PCF2123 RTC support
601 DEFAULT
:=m if ALL_KMODS
&& RTC_SUPPORT
602 DEPENDS
:=+LINUX_5_4
:kmod-regmap-spi
603 KCONFIG
:=CONFIG_RTC_DRV_PCF2123 \
605 FILES
:=$(LINUX_DIR
)/drivers
/rtc
/rtc-pcf2123.ko
606 AUTOLOAD
:=$(call AutoProbe
,rtc-pcf2123
)
609 define KernelPackage
/rtc-pcf2123
/description
610 Kernel module for Philips PCF2123 RTC chip
613 $(eval
$(call KernelPackage
,rtc-pcf2123
))
615 define KernelPackage
/rtc-pcf2127
616 SUBMENU
:=$(OTHER_MENU
)
617 TITLE
:=NXP PCF2127 and PCF2129 RTC support
618 DEFAULT
:=m if ALL_KMODS
&& RTC_SUPPORT
619 DEPENDS
:=+kmod-i2c-core
+kmod-regmap-spi
620 KCONFIG
:=CONFIG_RTC_DRV_PCF2127 \
622 FILES
:=$(LINUX_DIR
)/drivers
/rtc
/rtc-pcf2127.ko
623 AUTOLOAD
:=$(call AutoProbe
,rtc-pcf2127
)
626 define KernelPackage
/rtc-pcf2127
/description
627 Kernel module for NXP PCF2127 and PCF2129 RTC chip
630 $(eval
$(call KernelPackage
,rtc-pcf2127
))
632 define KernelPackage
/rtc-pt7c4338
633 SUBMENU
:=$(OTHER_MENU
)
634 TITLE
:=Pericom PT7C4338 RTC support
635 DEFAULT
:=m if ALL_KMODS
&& RTC_SUPPORT
636 DEPENDS
:=+kmod-i2c-core
637 KCONFIG
:=CONFIG_RTC_DRV_PT7C4338 \
639 FILES
:=$(LINUX_DIR
)/drivers
/rtc
/rtc-pt7c4338.ko
640 AUTOLOAD
:=$(call AutoProbe
,rtc-pt7c4338
)
643 define KernelPackage
/rtc-pt7c4338
/description
644 Kernel module for Pericom PT7C4338 i2c RTC chip
647 $(eval
$(call KernelPackage
,rtc-pt7c4338
))
649 define KernelPackage
/rtc-rs5c372a
650 SUBMENU
:=$(OTHER_MENU
)
651 TITLE
:=Ricoh R2025S
/D
, RS5C372A
/B
, RV5C386
, RV5C387A
652 DEFAULT
:=m if ALL_KMODS
&& RTC_SUPPORT
653 DEPENDS
:=+kmod-i2c-core
654 KCONFIG
:=CONFIG_RTC_DRV_RS5C372 \
656 FILES
:=$(LINUX_DIR
)/drivers
/rtc
/rtc-rs5c372.ko
657 AUTOLOAD
:=$(call AutoLoad
,50,rtc-rs5c372
,1)
660 define KernelPackage
/rtc-rs5c372a
/description
661 Kernel module for Ricoh R2025S
/D
, RS5C372A
/B
, RV5C386
, RV5C387A RTC on chip module
664 $(eval
$(call KernelPackage
,rtc-rs5c372a
))
666 define KernelPackage
/rtc-rx8025
667 SUBMENU
:=$(OTHER_MENU
)
668 TITLE
:=Epson RX-8025
/ RX-8035
669 DEFAULT
:=m if ALL_KMODS
&& RTC_SUPPORT
670 DEPENDS
:=+kmod-i2c-core
671 KCONFIG
:=CONFIG_RTC_DRV_RX8025 \
673 FILES
:=$(LINUX_DIR
)/drivers
/rtc
/rtc-rx8025.ko
674 AUTOLOAD
:=$(call AutoLoad
,50,rtc-rx8025
,1)
677 define KernelPackage
/rtc-rx8025
/description
678 Kernel module for Epson RX-8025 and RX-8035 I2C RTC chip
681 $(eval
$(call KernelPackage
,rtc-rx8025
))
684 define KernelPackage
/mtdtests
685 SUBMENU
:=$(OTHER_MENU
)
686 TITLE
:=MTD subsystem tests
687 KCONFIG
:=CONFIG_MTD_TESTS
689 $(LINUX_DIR
)/drivers
/mtd
/tests
/mtd_nandecctest.ko \
690 $(LINUX_DIR
)/drivers
/mtd
/tests
/mtd_oobtest.ko \
691 $(LINUX_DIR
)/drivers
/mtd
/tests
/mtd_pagetest.ko \
692 $(LINUX_DIR
)/drivers
/mtd
/tests
/mtd_readtest.ko \
693 $(LINUX_DIR
)/drivers
/mtd
/tests
/mtd_speedtest.ko \
694 $(LINUX_DIR
)/drivers
/mtd
/tests
/mtd_stresstest.ko \
695 $(LINUX_DIR
)/drivers
/mtd
/tests
/mtd_subpagetest.ko \
696 $(LINUX_DIR
)/drivers
/mtd
/tests
/mtd_torturetest.ko
699 define KernelPackage
/mtdtests
/description
700 Kernel modules for MTD subsystem
/driver testing
703 $(eval
$(call KernelPackage
,mtdtests
))
706 define KernelPackage
/mtdoops
707 SUBMENU
:=$(OTHER_MENU
)
708 TITLE
:=Log panic
/oops to an MTD buffer
709 KCONFIG
:=CONFIG_MTD_OOPS
710 FILES
:=$(LINUX_DIR
)/drivers
/mtd
/mtdoops.ko
713 define KernelPackage
/mtdoops
/description
714 Kernel modules for Log panic
/oops to an MTD buffer
717 $(eval
$(call KernelPackage
,mtdoops
))
720 define KernelPackage
/mtdram
721 SUBMENU
:=$(OTHER_MENU
)
722 TITLE
:=Test MTD driver using RAM
723 KCONFIG
:=CONFIG_MTD_MTDRAM \
724 CONFIG_MTDRAM_TOTAL_SIZE
=4096 \
725 CONFIG_MTDRAM_ERASE_SIZE
=128
726 FILES
:=$(LINUX_DIR
)/drivers
/mtd
/devices
/mtdram.ko
729 define KernelPackage
/mtdram
/description
730 Test MTD driver using RAM
733 $(eval
$(call KernelPackage
,mtdram
))
736 define KernelPackage
/serial-8250
737 SUBMENU
:=$(OTHER_MENU
)
739 KCONFIG
:= CONFIG_SERIAL_8250 \
740 CONFIG_SERIAL_8250_PCI \
741 CONFIG_SERIAL_8250_NR_UARTS
=16 \
742 CONFIG_SERIAL_8250_RUNTIME_UARTS
=16 \
743 CONFIG_SERIAL_8250_EXTENDED
=y \
744 CONFIG_SERIAL_8250_MANY_PORTS
=y \
745 CONFIG_SERIAL_8250_SHARE_IRQ
=y \
746 CONFIG_SERIAL_8250_DETECT_IRQ
=n \
747 CONFIG_SERIAL_8250_RSA
=n
749 $(LINUX_DIR
)/drivers
/tty
/serial
/8250/8250.ko \
750 $(LINUX_DIR
)/drivers
/tty
/serial
/8250/8250_base.ko \
751 $(if
$(CONFIG_PCI
),$(LINUX_DIR
)/drivers
/tty
/serial
/8250/8250_pci.ko
) \
752 $(if
$(CONFIG_GPIOLIB
),$(LINUX_DIR
)/drivers
/tty
/serial
/serial_mctrl_gpio.ko@ge5.3
)
753 AUTOLOAD
:=$(call AutoProbe
,8250 8250_base
8250_pci
)
756 define KernelPackage
/serial-8250
/description
757 Kernel module for
8250 UART based serial ports
760 $(eval
$(call KernelPackage
,serial-8250
))
763 define KernelPackage
/serial-8250-exar
764 SUBMENU
:=$(OTHER_MENU
)
765 TITLE
:=Exar
8250 UARTs
766 KCONFIG
:= CONFIG_SERIAL_8250_EXAR
767 FILES
:=$(LINUX_DIR
)/drivers
/tty
/serial
/8250/8250_exar.ko
768 AUTOLOAD
:=$(call AutoProbe
,8250 8250_base
8250_exar
)
769 DEPENDS
:=+kmod-serial-8250
772 define KernelPackage
/serial-8250-exar
/description
773 Kernel module for Exar serial ports
776 $(eval
$(call KernelPackage
,serial-8250-exar
))
779 define KernelPackage
/regmap-core
780 SUBMENU
:=$(OTHER_MENU
)
781 TITLE
:=Generic register map support
783 KCONFIG
:=CONFIG_REGMAP
784 ifneq ($(wildcard $(LINUX_DIR
)/drivers
/base
/regmap
/regmap-core.ko
),)
785 FILES
:=$(LINUX_DIR
)/drivers
/base
/regmap
/regmap-core.ko
789 define KernelPackage
/regmap-core
/description
790 Generic register map support
793 $(eval
$(call KernelPackage
,regmap-core
))
796 define KernelPackage
/regmap-spi
797 SUBMENU
:=$(OTHER_MENU
)
798 TITLE
:=SPI register map support
799 DEPENDS
:=+kmod-regmap-core
801 KCONFIG
:=CONFIG_REGMAP_SPI \
803 FILES
:=$(LINUX_DIR
)/drivers
/base
/regmap
/regmap-spi.ko
806 define KernelPackage
/regmap-spi
/description
807 SPI register map support
810 $(eval
$(call KernelPackage
,regmap-spi
))
813 define KernelPackage
/regmap-i2c
814 SUBMENU
:=$(OTHER_MENU
)
815 TITLE
:=I2C register map support
816 DEPENDS
:=+kmod-regmap-core
+kmod-i2c-core
818 KCONFIG
:=CONFIG_REGMAP_I2C
819 FILES
:=$(LINUX_DIR
)/drivers
/base
/regmap
/regmap-i2c.ko
822 define KernelPackage
/regmap-i2c
/description
823 I2C register map support
826 $(eval
$(call KernelPackage
,regmap-i2c
))
829 define KernelPackage
/regmap-mmio
830 SUBMENU
:=$(OTHER_MENU
)
831 TITLE
:=MMIO register map support
832 DEPENDS
:=+kmod-regmap-core
834 KCONFIG
:=CONFIG_REGMAP_MMIO
835 FILES
:=$(LINUX_DIR
)/drivers
/base
/regmap
/regmap-mmio.ko
838 define KernelPackage
/regmap-mmio
/description
839 MMIO register map support
842 $(eval
$(call KernelPackage
,regmap-mmio
))
845 define KernelPackage
/ikconfig
846 SUBMENU
:=$(OTHER_MENU
)
847 TITLE
:=Kernel configuration via
/proc
/config.gz
848 KCONFIG
:=CONFIG_IKCONFIG \
849 CONFIG_IKCONFIG_PROC
=y
850 FILES
:=$(LINUX_DIR
)/kernel
/configs.ko
851 AUTOLOAD
:=$(call AutoLoad
,70,configs
)
854 define KernelPackage
/ikconfig
/description
855 Kernel configuration via
/proc
/config.gz
858 $(eval
$(call KernelPackage
,ikconfig
))
861 define KernelPackage
/zram
862 SUBMENU
:=$(OTHER_MENU
)
864 DEPENDS
:=+kmod-lib-lzo
+kmod-lib-lz4
868 CONFIG_ZRAM_DEBUG
=n \
869 CONFIG_PGTABLE_MAPPING
=n \
870 CONFIG_ZRAM_WRITEBACK
=n \
871 CONFIG_ZSMALLOC_STAT
=n \
872 CONFIG_ZRAM_LZ4_COMPRESS
=y
874 $(LINUX_DIR
)/mm
/zsmalloc.ko \
875 $(LINUX_DIR
)/drivers
/block
/zram
/zram.ko
876 AUTOLOAD
:=$(call AutoLoad
,20,zsmalloc zram
)
879 define KernelPackage
/zram
/description
880 Compressed RAM block device support
883 $(eval
$(call KernelPackage
,zram
))
886 define KernelPackage
/pps
887 SUBMENU
:=$(OTHER_MENU
)
890 FILES
:=$(LINUX_DIR
)/drivers
/pps
/pps_core.ko
891 AUTOLOAD
:=$(call AutoLoad
,17,pps_core
,1)
894 define KernelPackage
/pps
/description
895 PPS
(Pulse Per Second
) is a special pulse provided by some GPS
896 antennae. Userland can use it to
get a high-precision time
900 $(eval
$(call KernelPackage
,pps
))
903 define KernelPackage
/pps-gpio
904 SUBMENU
:=$(OTHER_MENU
)
905 TITLE
:=PPS client using GPIO
907 KCONFIG
:=CONFIG_PPS_CLIENT_GPIO
908 FILES
:=$(LINUX_DIR
)/drivers
/pps
/clients
/pps-gpio.ko
909 AUTOLOAD
:=$(call AutoLoad
,18,pps-gpio
,1)
912 define KernelPackage
/pps-gpio
/description
913 Support for a PPS source using GPIO. To be useful you must
914 also register a platform device specifying the GPIO pin and
915 other options
, usually in your board setup.
918 $(eval
$(call KernelPackage
,pps-gpio
))
921 define KernelPackage
/pps-ldisc
922 SUBMENU
:=$(OTHER_MENU
)
923 TITLE
:=PPS line discipline
925 KCONFIG
:=CONFIG_PPS_CLIENT_LDISC
926 FILES
:=$(LINUX_DIR
)/drivers
/pps
/clients
/pps-ldisc.ko
927 AUTOLOAD
:=$(call AutoLoad
,18,pps-ldisc
,1)
930 define KernelPackage
/pps-ldisc
/description
931 Support for a PPS source connected with the CD
(Carrier
932 Detect
) pin of your serial port.
935 $(eval
$(call KernelPackage
,pps-ldisc
))
938 define KernelPackage
/ptp
939 SUBMENU
:=$(OTHER_MENU
)
940 TITLE
:=PTP clock support
943 CONFIG_PTP_1588_CLOCK \
944 CONFIG_NET_PTP_CLASSIFY
=y
945 FILES
:=$(LINUX_DIR
)/drivers
/ptp
/ptp.ko
946 AUTOLOAD
:=$(call AutoLoad
,18,ptp
,1)
949 define KernelPackage
/ptp
/description
950 The IEEE
1588 standard defines a method to precisely
951 synchronize distributed clocks over Ethernet networks.
954 $(eval
$(call KernelPackage
,ptp
))
957 define KernelPackage
/ptp-gianfar
958 SUBMENU
:=$(OTHER_MENU
)
959 TITLE
:=Freescale Gianfar PTP support
960 DEPENDS
:=@TARGET_mpc85xx
+kmod-ptp @LINUX_4_14
961 KCONFIG
:=CONFIG_PTP_1588_CLOCK_GIANFAR
962 FILES
:=$(LINUX_DIR
)/drivers
/net
/ethernet
/freescale
/gianfar_ptp.ko
963 AUTOLOAD
:=$(call AutoProbe
,gianfar_ptp
)
966 define KernelPackage
/ptp-gianfar
/description
967 Kernel module for IEEE
1588 support for Freescale
968 Gianfar Ethernet drivers
971 $(eval
$(call KernelPackage
,ptp-gianfar
))
973 define KernelPackage
/ptp-qoriq
974 SUBMENU
:=$(OTHER_MENU
)
975 TITLE
:=Freescale QorIQ PTP support
976 DEPENDS
:=@TARGET_mpc85xx
+kmod-ptp @
!LINUX_4_14
977 KCONFIG
:=CONFIG_PTP_1588_CLOCK_QORIQ
978 FILES
:=$(LINUX_DIR
)/drivers
/ptp
/ptp_qoriq.o
979 AUTOLOAD
:=$(call AutoProbe
,ptp_qoriq
)
983 define KernelPackage
/ptp-qoriq
/description
984 Kernel module for IEEE
1588 support for Freescale
985 QorIQ Ethernet drivers
988 $(eval
$(call KernelPackage
,ptp-qoriq
))
990 define KernelPackage
/random-core
991 SUBMENU
:=$(OTHER_MENU
)
992 TITLE
:=Hardware Random Number Generator Core support
993 KCONFIG
:=CONFIG_HW_RANDOM
994 FILES
:=$(LINUX_DIR
)/drivers
/char
/hw_random
/rng-core.ko
997 define KernelPackage
/random-core
/description
998 Kernel module for the HW random number generator core infrastructure
1001 $(eval
$(call KernelPackage
,random-core
))
1004 define KernelPackage
/random-tpm
1005 SUBMENU
:=$(OTHER_MENU
)
1006 TITLE
:=Hardware Random Number Generator TPM support
1007 KCONFIG
:=CONFIG_HW_RANDOM_TPM
1008 FILES
:=$(LINUX_DIR
)/drivers
/char
/hw_random
/tpm-rng.ko
1009 DEPENDS
:= +kmod-random-core
+kmod-tpm @LINUX_4_14
1010 AUTOLOAD
:=$(call AutoProbe
,tpm-rng
)
1013 define KernelPackage
/random-tpm
/description
1014 Kernel module for the Random Number Generator
1015 in the Trusted Platform Module.
1018 $(eval
$(call KernelPackage
,random-tpm
))
1020 define KernelPackage
/thermal
1021 SUBMENU
:=$(OTHER_MENU
)
1022 TITLE
:=Generic Thermal sysfs driver
1023 DEPENDS
:=+kmod-hwmon-core
1027 CONFIG_THERMAL_OF
=y \
1028 CONFIG_CPU_THERMAL
=y \
1029 CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE
=y \
1030 CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE
=n \
1031 CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE
=n \
1032 CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS
=0 \
1033 CONFIG_THERMAL_GOV_FAIR_SHARE
=n \
1034 CONFIG_THERMAL_GOV_STEP_WISE
=y \
1035 CONFIG_THERMAL_GOV_USER_SPACE
=n \
1036 CONFIG_THERMAL_HWMON
=y \
1037 CONFIG_THERMAL_EMULATION
=n
1038 FILES
:=$(LINUX_DIR
)/drivers
/thermal
/thermal_sys.ko
1039 AUTOLOAD
:=$(call AutoProbe
,thermal_sys
)
1042 define KernelPackage
/thermal
/description
1043 Generic Thermal Sysfs driver offers a generic mechanism for thermal
1044 management. Usually it
's made up of one or more thermal zone and cooling
1048 $(eval $(call KernelPackage,thermal))
1051 define KernelPackage/gpio-beeper
1052 SUBMENU:=$(OTHER_MENU)
1053 TITLE:=GPIO beeper support
1054 DEPENDS:=+kmod-input-core
1056 CONFIG_INPUT_MISC=y \
1057 CONFIG_INPUT_GPIO_BEEPER
1059 $(LINUX_DIR)/drivers/input/misc/gpio-beeper.ko
1060 AUTOLOAD:=$(call AutoLoad,50,gpio-beeper)
1063 define KernelPackage/gpio-beeper/description
1064 This enables playing beeps through an GPIO-connected buzzer
1067 $(eval $(call KernelPackage,gpio-beeper))
1070 define KernelPackage/echo
1071 SUBMENU:=$(OTHER_MENU)
1072 TITLE:=Line Echo Canceller
1073 KCONFIG:=CONFIG_ECHO
1074 FILES:=$(LINUX_DIR)/drivers/misc/echo/echo.ko
1075 AUTOLOAD:=$(call AutoLoad,50,echo)
1078 define KernelPackage/echo/description
1079 This driver provides line echo cancelling support for mISDN and
1083 $(eval $(call KernelPackage,echo))
1086 define KernelPackage/bmp085
1087 SUBMENU:=$(OTHER_MENU)
1088 TITLE:=BMP085/BMP18x pressure sensor
1089 DEPENDS:= +kmod-regmap-core
1090 KCONFIG:= CONFIG_BMP085
1091 FILES:= $(LINUX_DIR)/drivers/misc/bmp085.ko
1094 define KernelPackage/bmp085/description
1095 This driver adds support for Bosch Sensortec's digital pressure
1096 sensors BMP085 and BMP18x.
1099 $(eval
$(call KernelPackage
,bmp085
))
1102 define KernelPackage
/bmp085-i2c
1103 SUBMENU
:=$(OTHER_MENU
)
1104 TITLE
:=BMP085
/BMP18x pressure sensor I2C
1105 DEPENDS
:= +kmod-bmp085
1106 KCONFIG
:= CONFIG_BMP085_I2C
1107 FILES
:= $(LINUX_DIR
)/drivers
/misc
/bmp085-i2c.ko
1108 AUTOLOAD
:=$(call AutoProbe
,bmp085-i2c
)
1110 define KernelPackage
/bmp085-i2c
/description
1111 This driver adds support for Bosch Sensortec
's digital pressure
1112 sensor connected via I2C.
1115 $(eval $(call KernelPackage,bmp085-i2c))
1118 define KernelPackage/bmp085-spi
1119 SUBMENU:=$(OTHER_MENU)
1120 TITLE:=BMP085/BMP18x pressure sensor SPI
1121 DEPENDS:= +kmod-bmp085
1122 KCONFIG:= CONFIG_BMP085_SPI
1123 FILES:= $(LINUX_DIR)/drivers/misc/bmp085-spi.ko
1124 AUTOLOAD:=$(call AutoProbe,bmp085-spi)
1126 define KernelPackage/bmp085-spi/description
1127 This driver adds support for Bosch Sensortec's digital pressure
1128 sensor connected via SPI.
1131 $(eval
$(call KernelPackage
,bmp085-spi
))
1133 define KernelPackage
/tpm
1134 SUBMENU
:=$(OTHER_MENU
)
1135 TITLE
:=TPM Hardware Support
1136 DEPENDS
:= +!LINUX_4_14
:kmod-random-core
1137 KCONFIG
:= CONFIG_TCG_TPM
1138 FILES
:= $(LINUX_DIR
)/drivers
/char
/tpm
/tpm.ko
1139 AUTOLOAD
:=$(call AutoLoad
,10,tpm
,1)
1142 define KernelPackage
/tpm
/description
1143 This enables TPM Hardware Support.
1146 $(eval
$(call KernelPackage
,tpm
))
1148 define KernelPackage
/tpm-tis
1149 SUBMENU
:=$(OTHER_MENU
)
1150 TITLE
:=TPM TIS
1.2 Interface
/ TPM
2.0 FIFO Interface
1151 DEPENDS
:= @TARGET_x86
+kmod-tpm
1152 KCONFIG
:= CONFIG_TCG_TIS
1154 $(LINUX_DIR
)/drivers
/char
/tpm
/tpm_tis.ko \
1155 $(LINUX_DIR
)/drivers
/char
/tpm
/tpm_tis_core.ko
1156 AUTOLOAD
:=$(call AutoLoad
,20,tpm_tis
,1)
1159 define KernelPackage
/tpm-tis
/description
1160 If you have a TPM security chip that is compliant with the
1161 TCG TIS
1.2 TPM specification
(TPM1.2
) or the TCG PTP FIFO
1162 specification
(TPM2.0
) say Yes and it will be accessible from
1166 $(eval
$(call KernelPackage
,tpm-tis
))
1168 define KernelPackage
/tpm-i2c-atmel
1169 SUBMENU
:=$(OTHER_MENU
)
1170 TITLE
:=TPM I2C Atmel Support
1171 DEPENDS
:= +kmod-tpm
+kmod-i2c-core
1172 KCONFIG
:= CONFIG_TCG_TIS_I2C_ATMEL
1173 FILES
:= $(LINUX_DIR
)/drivers
/char
/tpm
/tpm_i2c_atmel.ko
1174 AUTOLOAD
:=$(call AutoLoad
,40,tpm_i2c_atmel
,1)
1177 define KernelPackage
/tpm-i2c-atmel
/description
1178 This enables the TPM Interface Specification
1.2 Interface
(I2C
- Atmel
)
1181 $(eval
$(call KernelPackage
,tpm-i2c-atmel
))
1183 define KernelPackage
/tpm-i2c-infineon
1184 SUBMENU
:=$(OTHER_MENU
)
1185 TITLE
:= TPM I2C Infineon driver
1186 DEPENDS
:= +kmod-tpm
+kmod-i2c-core
1187 KCONFIG
:= CONFIG_TCG_TIS_I2C_INFINEON
1188 FILES
:= $(LINUX_DIR
)/drivers
/char
/tpm
/tpm_i2c_infineon.ko
1189 AUTOLOAD
:= $(call AutoLoad
,40,tpm_i2c_infineon
,1)
1192 define KernelPackage
/tpm-i2c-infineon
/description
1193 This enables the TPM Interface Specification
1.2 Interface
(I2C
- Infineon
)
1196 $(eval
$(call KernelPackage
,tpm-i2c-infineon
))
1199 define KernelPackage
/w83627hf-wdt
1200 SUBMENU
:=$(OTHER_MENU
)
1201 TITLE
:=Winbond
83627HF Watchdog Timer
1202 KCONFIG
:=CONFIG_W83627HF_WDT
1203 FILES
:=$(LINUX_DIR
)/drivers
/$(WATCHDOG_DIR
)/w83627hf_wdt.ko
1204 AUTOLOAD
:=$(call AutoLoad
,50,w83627hf-wdt
,1)
1207 define KernelPackage
/w83627hf-wdt
/description
1208 Kernel module for Winbond
83627HF Watchdog Timer
1211 $(eval
$(call KernelPackage
,w83627hf-wdt
))
1214 define KernelPackage
/itco-wdt
1215 SUBMENU
:=$(OTHER_MENU
)
1216 TITLE
:=Intel iTCO Watchdog Timer
1217 KCONFIG
:=CONFIG_ITCO_WDT \
1218 CONFIG_ITCO_VENDOR_SUPPORT
=y
1219 FILES
:=$(LINUX_DIR
)/drivers
/$(WATCHDOG_DIR
)/iTCO_wdt.ko \
1220 $(LINUX_DIR
)/drivers
/$(WATCHDOG_DIR
)/iTCO_vendor_support.ko
1221 AUTOLOAD
:=$(call AutoLoad
,50,iTCO_vendor_support iTCO_wdt
,1)
1224 define KernelPackage
/itco-wdt
/description
1225 Kernel module for Intel iTCO Watchdog Timer
1228 $(eval
$(call KernelPackage
,itco-wdt
))
1231 define KernelPackage
/it87-wdt
1232 SUBMENU
:=$(OTHER_MENU
)
1233 TITLE
:=ITE IT87 Watchdog Timer
1234 KCONFIG
:=CONFIG_IT87_WDT
1235 FILES
:=$(LINUX_DIR
)/drivers
/$(WATCHDOG_DIR
)/it87_wdt.ko
1236 AUTOLOAD
:=$(call AutoLoad
,50,it87-wdt
,1)
1237 MODPARAMS.it87-wdt
:= \
1242 define KernelPackage
/it87-wdt
/description
1243 Kernel module for ITE IT87 Watchdog Timer
1246 $(eval
$(call KernelPackage
,it87-wdt
))
1249 define KernelPackage
/f71808e-wdt
1250 SUBMENU
:=$(OTHER_MENU
)
1251 TITLE
:=Fintek F718xx
/F818xx Watchdog Timer
1252 DEPENDS
:=@TARGET_x86
1253 KCONFIG
:=CONFIG_F71808E_WDT
1254 FILES
:=$(LINUX_DIR
)/drivers
/$(WATCHDOG_DIR
)/f71808e_wdt.ko
1255 AUTOLOAD
:=$(call AutoProbe
,f71808e-wdt
,1)
1258 define KernelPackage
/f71808e-wdt
/description
1259 Kernel module for the watchdog timer found on many Fintek Super-IO chips.
1262 $(eval
$(call KernelPackage
,f71808e-wdt
))