2 # Copyright (c) 2012 OpenWrt.org
4 .
/lib
/functions
/service.sh
5 .
/lib
/functions
/network.sh
8 local NAT
="ip6tables -t nat"
14 local __value
=$
(cat "/proc/sys/net/ipv6/conf/$device/$option")
15 eval "$__return=$__value"
23 echo "$value" > "/proc/sys/net/ipv6/conf/$device/$option"
32 service_check
"$__exe" && {
34 [ -n "$__return" ] && eval "$__return=1"
36 rm -f "$SERVICE_PID_FILE"
46 SERVICE_PID_FILE
="$pidfile"
51 resolve_network_add
() {
56 network_get_device __cdevice
"$__section"
57 [ "$__cdevice" != "$__device" ] && return
59 eval "$__return"'="'"$__section"'"'
66 config_foreach resolve_network_add interface
"$__device" "$__return"
70 setup_masquerading
() {
72 local chain
="network6_masquerade_$2"
75 $NAT -D POSTROUTING
-j "$chain" 2>/dev
/null
&& {
76 $NAT -F "$chain" 2>/dev
/null
77 $NAT -X "$chain" 2>/dev
/null
80 [ "$cmd" != "stop" ] && {
82 $NAT -A "$chain" -o "$device" -j MASQUERADE
83 $NAT -A POSTROUTING
-j "$chain"
91 local chain
="network6_npt_$network"
93 [ "$cmd" != "start" ] && {
94 $NAT -D POSTROUTING
-j "$chain" 2>/dev
/null
&& {
95 $NAT -D PREROUTING
-j "$chain" 2>/dev
/null
96 $NAT -F "$chain" 2>/dev
/null
97 $NAT -X "$chain" 2>/dev
/null
101 [ "$cmd" != "stop" ] && {
102 $NAT -N "$chain" 2>/dev
/null
&& {
103 $NAT -A PREROUTING
-j "$chain"
104 $NAT -A POSTROUTING
-j "$chain"
116 local addr
=$
(echo "$prefix" | cut
-d/ -f1)
117 local rem
=$
(echo "$prefix" | cut
-d/ -f2)
118 local length
=$
(echo "$rem" | cut
-d, -f1)
122 # If preferred / valid provided
123 [ "$rem" != "$length" ] && {
124 prefer
=$
(echo "$rem" | cut
-d, -f2)
125 valid
=$
(echo "$rem" | cut
-d, -f3)
128 # Get prefix configuration
130 local prefix_action
=""
131 config_get ula global ula_prefix
132 config_get prefix_action
"$network" prefix_action
133 [ -z "$prefix_action" ] && prefix_action
="distribute"
135 # Always announce the ULA when doing NPT
136 [ "$prefix" == "$ula" -a "$prefix_action" == "npt" ] && prefix_action
="distribute"
138 [ "$prefix_action" == "distribute" -o "$prefix_action" == "npt" ] && {
139 local msg
='{"network": "'"$network"'", "prefix": "'"$addr"'", "length": '"$length"
140 [ -n "$valid" ] && msg
="$msg"', "valid": '"$valid"', "preferred": '"$prefer"
141 [ -z "$cmd" ] && cmd
=newprefix
143 [ "$prefix_action" == "npt" ] && msg
="$msg"', "npt": 1'
144 [ "$type" == "secondary" ] && msg
="$msg"', "secondary": 1'
145 ubus call
6distributed
"$cmd" "$msg}"
148 [ "$prefix_action" == "npt" ] && {
149 local chain
="network6_npt_$network"
150 local ula_addr
=$
(echo "$ula" | cut
-d/ -f1)
151 local ula_rem
=$
(echo "$ula" | cut
-d/ -f2)
152 local ula_length
=$
(echo "$ula_rem" | cut
-d, -f1)
155 network_get_device device
"$network"
156 [ "$length" -lt "$ula_length" ] && length
="$ula_length"
157 [ "$cmd" == "delprefix" ] && cmd
="-D $chain" || cmd
="-A $chain"
159 local in="-i $device -d $addr/$length -j NETMAP --to $ula_addr/$ula_length"
160 local out
="-o $device -s $ula_addr/$ula_length -j NETMAP --to $addr/$length"
162 setup_npt_chain start
"$network"
172 # Notify the address distribution daemon
173 ubus call
6distributed deliface
'{"network": "'"$network"'"}'
176 # Start RD & DHCPv6 service
178 config_get router_service global router_service
180 if [ "$router_service" == "dnsmasq" ]; then
181 rm -f "/var/etc/dnsmasq.d/ipv6-router-$network.conf"
182 /etc
/init.d
/dnsmasq restart
184 stop_service
/usr
/sbin
/6relayd
"/var/run/ipv6-router-$network.pid"
189 restart_relay_slave
() {
193 network_is_up
"$__section" ||
return
196 network_get_device __device
"$__section"
199 config_get __cmaster
"$__section" relay_master
201 [ "$__master" == "$__cmaster" ] && {
202 disable_interface
"$__section"
203 enable_interface
"$__section" "$__device"
214 network_is_up
"$__section" ||
return
218 network_get_device __device
"$__section"
220 # Match master network
222 config_get __cmaster
"$__section" relay_master
223 [ "$__master" == "$__cmaster" ] ||
return
227 config_get __cmode
"$__section" mode
228 [ "$__cmode" == "downstream" ] && __cmode
="router"
230 # Don't start fallback interfaces if we are in forced-relay mode
231 [ "$__cmode" == "relay" -o "$__mode" == "fallback" ] ||
return
233 # Don't make non-relay or non-router interfaces slaves
234 [ "$__cmode" == "relay" -o "$__cmode" == "router" ] ||
return
236 # Disable any active distribution
237 [ "$__cmode" == "router" ] && disable_router
"$__section"
239 # Configure interface to accept RA and send RS
240 conf_set
"$__device" accept_ra
2
241 conf_set
"$__device" forwarding
2
243 eval "$__return"'="$'"$__return"' '"$__device"'"'
249 local pid_fallback
="/var/run/ipv6-relay-fallback-$network.pid"
250 local pid_forced
="/var/run/ipv6-relay-forced-$network.pid"
251 local was_fallback
=""
253 stop_service
/usr
/sbin
/6relayd
"$pid_fallback" was_fallback
254 stop_service
/usr
/sbin
/6relayd
"$pid_forced"
256 # Reenable normal distribution on slave interfaces
257 [ -n "$was_fallback" ] && config_foreach restart_relay_slave interface
"$network"
261 detect_forced_relay_mode
() {
266 config_get __cmode
"$__section" mode
267 [ "$__cmode" == "relay" ] && eval "$__mode=forced"
275 # Stop last active relay
276 stop_relay
"$network"
278 # Detect if we have a forced-relay
279 [ -z "$mode" ] && config_foreach detect_forced_relay_mode interface mode
281 # Don't start without a mode
282 [ -z "$mode" ] && return
284 # Detect master device
286 network_get_device device
"$network"
288 # Generate command string
289 local cmd
="/usr/sbin/6relayd -A $device"
291 config_foreach add_relay_slave interface ifaces
"$network" "$mode"
294 local pid
="/var/run/ipv6-relay-$mode-$network.pid"
295 [ -n "$ifaces" ] && start_service
"$cmd $ifaces" "$pid"
297 # There are no slave interface, however indicate that we want to relay
298 [ -z "$ifaces" ] && touch "$pid"
302 setup_prefix_fallback
() {
307 stop_relay
"$network"
308 restart_relay
"$network"
310 setup_masquerading stop
"$network"
312 [ "$cmd" != "stop" ] && {
314 config_get fallback
"$network" prefix_fallback
316 [ "$fallback" == "relay" ] && restart_relay
"$network" fallback
317 [ "$fallback" == "masquerade" ] && setup_masquerading start
"$network" "$device"
322 restart_master_relay
() {
325 local pid_fallback
="/var/run/ipv6-relay-fallback-$network.pid"
326 local pid_forced
="/var/run/ipv6-relay-forced-$network.pid"
328 # Disable active relaying to this interface
329 config_get relay_master
"$network" relay_master
330 [ -z "$relay_master" ] && return
331 network_is_up
"$relay_master" ||
return
333 # Detect running mode
334 [ -z "$mode" && -f "$pid_fallback" ] && mode
="fallback"
335 [ -z "$mode" && -f "$pid_forced" ] && mode
="forced"
337 # Restart relay if running or start requested
338 [ -n "$mode" ] && restart_relay
"$relay_master" "$mode"
342 disable_interface
() {
345 # Delete all prefixes routed to this interface
346 ubus call
6distributed delprefix
'{"network": "'"$network"'"}'
349 restart_master_relay
"$network"
351 # Disable distribution
352 disable_router
"$network"
354 # Disable any active relays, masquerading rules and NPT rules
355 stop_relay
"$network"
356 setup_masquerading stop
"$network"
357 setup_npt_chain stop
"$network"
359 # Disable DHCPv6 client if enabled, state script will take care
360 stop_service
/usr
/sbin
/odhcp6c
"/var/run/ipv6-dhcpv6-$network.pid"
364 enable_ula_prefix
() {
367 [ -z "$ula" ] && ula
="global"
371 config_get ula_prefix
"$ula" ula_prefix
373 # ULA auto configuration (first init)
374 [ "$ula_prefix" == "auto" ] && {
379 # Sometimes results are empty, therefore try until it works...
380 while [ -z "$r1" -o -z "$r2" -o -z "$r3" ]; do
381 r1
=$
(printf "%02x" $
(($
(</dev
/urandom
tr -dc 0-9 |
dd bs
=9 count
=1) % 256)))
382 r2
=$
(printf "%01x" $
(($
(</dev
/urandom
tr -dc 0-9 |
dd bs
=9 count
=1) % 65536)))
383 r3
=$
(printf "%01x" $
(($
(</dev
/urandom
tr -dc 0-9 |
dd bs
=9 count
=1) % 65536)))
386 ula_prefix
="fd$r1:$r2:$r3::/48"
388 # Save prefix so it will be preserved across reboots
389 config_set
"$ula" ula_prefix
"$ula_prefix"
390 uci_set network6
"$ula" ula_prefix
"$ula_prefix"
395 [ -n "$ula_prefix" ] && announce_prefix
"$ula_prefix" "$network" newprefix secondary
403 # Enable global forwarding
405 conf_get global_forward all forwarding
406 [ "$global_forward" != "1" ] && conf_set all forwarding
1
409 conf_set
"$device" accept_ra
1
410 conf_set
"$device" forwarding
1
413 enable_ula_prefix
"$network"
414 # Compatibility (deprecated)
415 enable_ula_prefix
"$network" "$network"
417 # Announce all static prefixes
418 config_list_foreach
"$network" static_prefix announce_prefix
$network
420 # start relay if there are forced relay members
421 restart_relay
"$network"
431 config_get length
"$network" advertise_prefix
432 [ -z "$length" ] && length
=64
433 [ "$length" -ne "0" ] && ubus call
6distributed newiface
'{"network": "'"$network"'", "iface": "'"$device"'", "length": '"$length"'}'
435 # Start RD & DHCPv6 service
437 config_get router_service global router_service
439 if [ "$router_service" == "dnsmasq" ]; then
441 config_get dnsmasq_opts
"$network" dnsmasq_opts
442 [ -z "$dnsmasq_opts" ] && dnsmasq_opts
="ra-names,24h"
444 local conf
="/var/etc/dnsmasq.d/ipv6-router-$network.conf"
445 mkdir
-p $
(dirname $conf)
446 echo "dhcp-range=::00ff,::ffff,constructor:$device,$dnsmasq_opts" > $conf
447 echo "enable-ra" >> $conf
448 /etc
/init.d
/dnsmasq restart
450 local pid
="/var/run/ipv6-router-$network.pid"
451 start_service
"/usr/sbin/6relayd -S . $device" "$pid"
454 # Try relaying if necessary
455 restart_master_relay
"$network"
464 conf_set
"$device" accept_ra
2
465 conf_set
"$device" forwarding
2
468 conf_set
"$device" disable_ipv6
1
469 conf_set
"$device" disable_ipv6
0
471 # Configure DHCPv6-client
472 local dhcp6_opts
="$device"
474 # Configure DHCPv6-client (e.g. requested prefix)
476 config_get request_prefix
"$network" request_prefix
477 [ -z "$request_prefix" ] && request_prefix
="auto"
478 [ "$request_prefix" != "no" ] && {
479 [ "$request_prefix" == "auto" ] && request_prefix
=0
480 dhcp6_opts
="-P$request_prefix $dhcp6_opts"
483 # Start DHCPv6 client
484 local pid
="/var/run/ipv6-dhcpv6-$network.pid"
485 start_service
"/usr/sbin/odhcp6c -s/lib/ipv6/dhcpv6.sh $dhcp6_opts" "$pid"
487 # Refresh RA on all interfaces
488 for pid
in /var
/run
/ipv6-router-
*.pid
; do
489 kill -SIGUSR1 $
(cat "$pid")
500 [ "$mode" == "6rd" ] && {
501 local ip4prefix
=$
(uci_get network
"$network" ip4prefixlen
0)
502 local ip6prefix
=$
(uci_get network
"$network" ip6prefixlen
32)
503 prefixlen
=$
(($ip6prefix + 32 - $ip4prefix))
507 network_get_ipaddr6 prefix
"$network"
509 announce_prefix
"$prefix/$prefixlen" "$network"
519 config_get mode
"$network" mode
520 [ -n "$mode" -a "$mode" != "none" ] ||
return
522 # Compatibility with old mode names
523 [ "$mode" == "downstream" ] && mode
=router
524 [ "$mode" == "upstream" ] && mode
=dhcpv6
526 # Run mode startup code
527 enable_static
"$network" "$device"
528 [ "$mode" == "dhcpv6" ] && enable_dhcpv6
"$network" "$device"
529 [ "$mode" == "router" ] && enable_router
"$network" "$device"
530 [ "$mode" == "6to4" -o "$mode" == "6rd" ] && enable_6to4
"$network" "$device" "$mode"
531 [ "$mode" == "relay" ] && restart_master_relay
"$network" forced