1 # Example hostapd build time configuration
3 # This file lists the configuration options that are used when building the
4 # hostapd binary. All lines starting with # are ignored. Configuration option
5 # lines must be commented out complete, if they are not to be included, i.e.,
6 # just setting VARIABLE=n is not disabling that variable.
8 # This file is included in Makefile, so variables like CFLAGS and LIBS can also
9 # be modified from here. In most cass, these lines should use += in order not
10 # to override previous values of the variables.
12 # Driver interface for Host AP driver
13 #CONFIG_DRIVER_HOSTAP=y
15 # Driver interface for wired authenticator
18 # Driver interface for drivers using the nl80211 kernel interface
19 CONFIG_DRIVER_NL80211=y
21 # QCA vendor extensions to nl80211
22 #CONFIG_DRIVER_NL80211_QCA=y
24 # driver_nl80211.c requires libnl. If you are compiling it yourself
25 # you may need to point hostapd to your version of libnl.
27 #CFLAGS += -I$<path to libnl include files>
28 #LIBS += -L$<path to libnl library files>
30 # Use libnl v2.0 (or 3.0) libraries.
33 # Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
37 # Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
39 #CFLAGS += -I/usr/local/include
40 #LIBS += -L/usr/local/lib
41 #LIBS_p += -L/usr/local/lib
42 #LIBS_c += -L/usr/local/lib
44 # Driver interface for no driver (e.g., RADIUS server only)
50 # WPA2/IEEE 802.11i RSN pre-authentication
53 # IEEE 802.11w (management frame protection)
56 # Support Operating Channel Validation
59 # Integrated EAP server
62 # EAP Re-authentication Protocol (ERP) in integrated EAP server
65 # EAP-MD5 for the integrated EAP server
68 # EAP-TLS for the integrated EAP server
71 # EAP-MSCHAPv2 for the integrated EAP server
72 #CONFIG_EAP_MSCHAPV2=y
74 # EAP-PEAP for the integrated EAP server
77 # EAP-GTC for the integrated EAP server
80 # EAP-TTLS for the integrated EAP server
83 # EAP-SIM for the integrated EAP server
86 # EAP-AKA for the integrated EAP server
89 # EAP-AKA' for the integrated EAP server
90 # This requires CONFIG_EAP_AKA to be enabled, too.
91 #CONFIG_EAP_AKA_PRIME=y
93 # EAP-PAX for the integrated EAP server
96 # EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
99 # EAP-pwd for the integrated EAP server (secure authentication with a password)
102 # EAP-SAKE for the integrated EAP server
105 # EAP-GPSK for the integrated EAP server
107 # Include support for optional SHA256 cipher suite in EAP-GPSK
108 #CONFIG_EAP_GPSK_SHA256=y
110 # EAP-FAST for the integrated EAP server
113 # EAP-TEAP for the integrated EAP server
114 # Note: The current EAP-TEAP implementation is experimental and should not be
115 # enabled for production use. The IETF RFC 7170 that defines EAP-TEAP has number
116 # of conflicting statements and missing details and the implementation has
117 # vendor specific workarounds for those and as such, may not interoperate with
118 # any other implementation. This should not be used for anything else than
119 # experimentation and interoperability testing until those issues has been
123 # Wi-Fi Protected Setup (WPS)
125 # Enable UPnP support for external WPS Registrars
127 # Enable WPS support with NFC config method
133 # Trusted Network Connect (EAP-TNC)
136 # EAP-EKE for the integrated EAP server
139 # PKCS#12 (PFX) support (used to read private key and certificate file from
140 # a file that usually has extension .p12 or .pfx)
143 # RADIUS authentication server. This provides access to the integrated EAP
144 # server from external hosts using RADIUS.
145 #CONFIG_RADIUS_SERVER=y
147 # Build IPv6 support for RADIUS operations
150 # IEEE Std 802.11r-2008 (Fast BSS Transition)
153 # Use the hostapd's IEEE 802.11 authentication (ACL), but without
154 # the IEEE 802.11 Management capability (e.g., FreeBSD/net80211)
155 #CONFIG_DRIVER_RADIUS_ACL=y
157 # IEEE 802.11n (High Throughput) support
160 # Wireless Network Management (IEEE Std 802.11v-2011)
161 # Note: This is experimental and not complete implementation.
164 # IEEE 802.11ac (Very High Throughput) support
167 # IEEE 802.11ax HE support
168 # Note: This is experimental and work in progress. The definitions are still
169 # subject to change and this should not be expected to interoperate with the
170 # final IEEE 802.11ax version.
171 #CONFIG_IEEE80211AX=y
173 # Remove debugging code that is printing out debug messages to stdout.
174 # This can be used to reduce the size of the hostapd considerably if debugging
175 # code is not needed.
176 #CONFIG_NO_STDOUT_DEBUG=y
178 # Add support for writing debug log to a file: -f /tmp/hostapd.log
179 # Disabled by default.
182 # Send debug messages to syslog instead of stdout
183 CONFIG_DEBUG_SYSLOG=y
185 # Add support for sending all debug messages (regardless of debug verbosity)
186 # to the Linux kernel tracing facility. This helps debug the entire stack by
187 # making it easy to record everything happening from the driver up into the
188 # same file, e.g., using trace-cmd.
189 #CONFIG_DEBUG_LINUX_TRACING=y
191 # Remove support for RADIUS accounting
192 CONFIG_NO_ACCOUNTING=y
194 # Remove support for RADIUS
197 # Remove support for VLANs
200 # Enable support for fully dynamic VLANs. This enables hostapd to
201 # automatically create bridge and VLAN interfaces if necessary.
202 #CONFIG_FULL_DYNAMIC_VLAN=y
204 # Use netlink-based kernel API for VLAN operations instead of ioctl()
205 # Note: This requires libnl 3.1 or newer.
206 #CONFIG_VLAN_NETLINK=y
208 # Remove support for dumping internal state through control interface commands
209 # This can be used to reduce binary size at the cost of disabling a debugging
211 CONFIG_NO_DUMP_STATE=y
213 # Enable tracing code for developer debugging
214 # This tracks use of memory allocations and other registrations and reports
215 # incorrect use with a backtrace of call (or allocation) location.
217 # For BSD, comment out these.
219 #LIBS_p += -lexecinfo
220 #LIBS_c += -lexecinfo
222 # Use libbfd to get more details for developer debugging
223 # This enables use of libbfd to get more detailed symbols for the backtraces
224 # generated by CONFIG_WPA_TRACE=y.
225 #CONFIG_WPA_TRACE_BFD=y
226 # For BSD, comment out these.
227 #LIBS += -lbfd -liberty -lz
228 #LIBS_p += -lbfd -liberty -lz
229 #LIBS_c += -lbfd -liberty -lz
231 # hostapd depends on strong random number generation being available from the
232 # operating system. os_get_random() function is used to fetch random data when
233 # needed, e.g., for key generation. On Linux and BSD systems, this works by
234 # reading /dev/urandom. It should be noted that the OS entropy pool needs to be
235 # properly initialized before hostapd is started. This is important especially
236 # on embedded devices that do not have a hardware random number generator and
237 # may by default start up with minimal entropy available for random number
240 # As a safety net, hostapd is by default trying to internally collect
241 # additional entropy for generating random data to mix in with the data
242 # fetched from the OS. This by itself is not considered to be very strong, but
243 # it may help in cases where the system pool is not initialized properly.
244 # However, it is very strongly recommended that the system pool is initialized
245 # with enough entropy either by using hardware assisted random number
246 # generator or by storing state over device reboots.
248 # hostapd can be configured to maintain its own entropy store over restarts to
249 # enhance random number generation. This is not perfect, but it is much more
250 # secure than using the same sequence of random numbers after every reboot.
251 # This can be enabled with -e<entropy file> command line option. The specified
252 # file needs to be readable and writable by hostapd.
254 # If the os_get_random() is known to provide strong random data (e.g., on
255 # Linux/BSD, the board in question is known to have reliable source of random
256 # data from /dev/urandom), the internal hostapd random pool can be disabled.
257 # This will save some in binary size and CPU use. However, this should only be
258 # considered for builds that are known to be used on devices that meet the
259 # requirements described above.
260 CONFIG_NO_RANDOM_POOL=y
262 # Should we attempt to use the getrandom(2) call that provides more reliable
263 # yet secure randomness source than /dev/random on Linux 3.17 and newer.
264 # Requires glibc 2.25 to build, falls back to /dev/random if unavailable.
267 # Should we use poll instead of select? Select is used by default.
270 # Should we use epoll instead of select? Select is used by default.
273 # Should we use kqueue instead of select? Select is used by default.
274 #CONFIG_ELOOP_KQUEUE=y
276 # Select TLS implementation
277 # openssl = OpenSSL (default)
279 # internal = Internal TLSv1 implementation (experimental)
280 # linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental)
281 # none = Empty template
284 # TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
285 # can be enabled to get a stronger construction of messages when block ciphers
289 # TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
290 # can be enabled to enable use of stronger crypto algorithms.
293 # Select which ciphers to use by default with OpenSSL if the user does not
295 #CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT:!EXP:!LOW"
297 # If CONFIG_TLS=internal is used, additional library and include paths are
298 # needed for LibTomMath. Alternatively, an integrated, minimal version of
299 # LibTomMath can be used. See beginning of libtommath.c for details on benefits
300 # and drawbacks of this option.
301 #CONFIG_INTERNAL_LIBTOMMATH=y
302 #ifndef CONFIG_INTERNAL_LIBTOMMATH
303 #LTM_PATH=/usr/src/libtommath-0.39
304 #CFLAGS += -I$(LTM_PATH)
305 #LIBS += -L$(LTM_PATH)
306 #LIBS_p += -L$(LTM_PATH)
308 # At the cost of about 4 kB of additional binary size, the internal LibTomMath
309 # can be configured to include faster routines for exptmod, sqr, and div to
310 # speed up DH and RSA calculation considerably
311 #CONFIG_INTERNAL_LIBTOMMATH_FAST=y
313 # Interworking (IEEE 802.11u)
314 # This can be used to enable functionality to improve interworking with
316 #CONFIG_INTERWORKING=y
321 # Enable SQLite database support in hlr_auc_gw, EAP-SIM DB, and eap_user_file
324 # Enable Fast Session Transfer (FST)
327 # Enable CLI commands for FST testing
331 # This can be used to enable some testing options (see also the example
332 # configuration file) that are really useful only for testing clients that
333 # connect to this hostapd. These options allow, for example, to drop a
334 # certain percentage of probe requests or auth/(re)assoc frames.
336 #CONFIG_TESTING_OPTIONS=y
338 # Automatic Channel Selection
339 # This will allow hostapd to pick the channel automatically when channel is set
340 # to "acs_survey" or "0". Eventually, other ACS algorithms can be added in
343 # Automatic selection is currently only done through initialization, later on
344 # we hope to do background checks to keep us moving to more ideal channels as
345 # time goes by. ACS is currently only supported through the nl80211 driver and
346 # your driver must have survey dump capability that is filled by the driver
349 # You can customize the ACS survey algorithm with the hostapd.conf variable
352 # Supported ACS drivers:
357 # For more details refer to:
358 # http://wireless.kernel.org/en/users/Documentation/acs
362 # Multiband Operation support
363 # These extentions facilitate efficient use of multiple frequency bands
364 # available to the AP and the devices that may associate with it.
368 # Has the AP retain the Probe Request and (Re)Association Request frames from
369 # a client, from which a signature can be produced which can identify the model
370 # of client device like "Nexus 6P" or "iPhone 5s".
373 # Fast Initial Link Setup (FILS) (IEEE 802.11ai)
375 # FILS shared key authentication with PFS
376 #CONFIG_FILS_SK_PFS=y
378 # Include internal line edit mode in hostapd_cli. This can be used to provide
379 # limited command line editing and history support.
380 #CONFIG_WPA_CLI_EDIT=y
382 # Opportunistic Wireless Encryption (OWE)
383 # Experimental implementation of draft-harkins-owe-07.txt
386 # Airtime policy support
387 CONFIG_AIRTIME_POLICY=y
392 # Override default value for the wpa_disable_eapol_key_retries configuration
393 # parameter. See that parameter in hostapd.conf for more details.
394 #CFLAGS += -DDEFAULT_WPA_DISABLE_EAPOL_KEY_RETRIES=1
396 # uBus IPC/RPC System
397 # Services can connect to the bus and provide methods
398 # that can be called by other services or clients.
401 # OpenWrt patch 380-disable-ctrl-iface-mib.patch
402 # leads to the MIB only being compiled in if
403 # CONFIG_CTRL_IFACE_MIB is enabled.
404 #CONFIG_CTRL_IFACE_MIB=y