3 [ -n "$INCLUDE_ONLY" ] ||
{
9 proto_ncm_init_config
() {
12 proto_config_add_string
"device:device"
13 proto_config_add_string apn
14 proto_config_add_string auth
15 proto_config_add_string username
16 proto_config_add_string password
17 proto_config_add_string pincode
18 proto_config_add_string delay
19 proto_config_add_string mode
20 proto_config_add_string pdptype
21 proto_config_add_int profile
22 proto_config_add_defaults
28 local manufacturer initialize setmode connect ifname devname devpath
30 local device apn auth username password pincode delay mode pdptype profile
$PROTO_DEFAULT_OPTIONS
31 json_get_vars device apn auth username password pincode delay mode pdptype profile
$PROTO_DEFAULT_OPTIONS
33 [ "$metric" = "" ] && metric
="0"
35 [ -n "$profile" ] || profile
=1
37 pdptype
=`echo "$pdptype" | awk '{print toupper($0)}'`
38 [ "$pdptype" = "IP" -o "$pdptype" = "IPV6" -o "$pdptype" = "IPV4V6" ] ||
$pdptype="IP"
40 [ -n "$ctl_device" ] && device
=$ctl_device
43 echo "No control device specified"
44 proto_notify_error
"$interface" NO_DEVICE
45 proto_set_available
"$interface" 0
49 echo "Control device not valid"
50 proto_set_available
"$interface" 0
54 devname
="$(basename "$device")"
57 devpath
="$(readlink -f /sys/class/tty/$devname/device)"
58 ifname
="$( ls "$devpath"/../../*/net )"
61 devpath
="$(readlink -f /sys/class/usbmisc/$devname/device/)"
62 ifname
="$( ls "$devpath"/net )"
66 echo "The interface could not be found."
67 proto_notify_error
"$interface" NO_IFACE
68 proto_set_available
"$interface" 0
72 [ -n "$delay" ] && sleep "$delay"
74 manufacturer
=`gcom -d "$device" -s /etc/gcom/getcardinfo.gcom | awk 'NF && $0 !~ /AT\+CGMI/ { sub(/\+CGMI: /,""); print tolower($1); exit; }'`
76 echo "Failed to get modem information"
77 proto_notify_error
"$interface" GETINFO_FAILED
81 json_load
"$(cat /etc/gcom/ncm.json)"
82 json_select
"$manufacturer"
84 echo "Unsupported modem"
85 proto_notify_error
"$interface" UNSUPPORTED_MODEM
86 proto_set_available
"$interface" 0
89 json_get_values initialize initialize
90 for i
in $initialize; do
91 eval COMMAND
="$i" gcom
-d "$device" -s /etc
/gcom
/runcommand.gcom ||
{
92 echo "Failed to initialize modem"
93 proto_notify_error
"$interface" INITIALIZE_FAILED
98 [ -n "$pincode" ] && {
99 PINCODE
="$pincode" gcom
-d "$device" -s /etc
/gcom
/setpin.gcom ||
{
100 echo "Unable to verify PIN"
101 proto_notify_error
"$interface" PIN_FAILED
102 proto_block_restart
"$interface"
108 json_get_var setmode
"$mode"
109 eval COMMAND
="$setmode" gcom
-d "$device" -s /etc
/gcom
/runcommand.gcom ||
{
110 echo "Failed to set operating mode"
111 proto_notify_error
"$interface" SETMODE_FAILED
117 echo "Starting network $interface"
118 json_get_vars connect
119 eval COMMAND
="$connect" gcom
-d "$device" -s /etc
/gcom
/runcommand.gcom ||
{
120 echo "Failed to connect"
121 proto_notify_error
"$interface" CONNECT_FAILED
125 echo "Setting up $ifname"
127 proto_init_update
"$ifname" 1
129 json_add_string
"manufacturer" "$manufacturer"
131 proto_send_update
"$interface"
133 [ "$pdptype" = "IP" -o "$pdptype" = "IPV4V6" ] && {
135 json_add_string name
"${interface}_4"
136 json_add_string ifname
"@$interface"
137 json_add_string proto
"dhcp"
138 proto_add_dynamic_defaults
139 ubus call network add_dynamic
"$(json_dump)"
142 [ "$pdptype" = "IPV6" -o "$pdptype" = "IPV4V6" ] && {
144 json_add_string name
"${interface}_6"
145 json_add_string ifname
"@$interface"
146 json_add_string proto
"dhcpv6"
147 json_add_string extendprefix
1
148 proto_add_dynamic_defaults
149 ubus call network add_dynamic
"$(json_dump)"
153 proto_ncm_teardown
() {
156 local manufacturer disconnect
159 json_get_vars device profile
161 [ -n "$ctl_device" ] && device
=$ctl_device
163 [ -n "$profile" ] || profile
=1
165 echo "Stopping network $interface"
167 json_load
"$(ubus call network.interface.$interface status)"
169 json_get_vars manufacturer
171 json_load
"$(cat /etc/gcom/ncm.json)"
172 json_select
"$manufacturer" ||
{
173 echo "Unsupported modem"
174 proto_notify_error
"$interface" UNSUPPORTED_MODEM
178 json_get_vars disconnect
179 eval COMMAND
="$disconnect" gcom
-d "$device" -s /etc
/gcom
/runcommand.gcom ||
{
180 echo "Failed to disconnect"
181 proto_notify_error
"$interface" DISCONNECT_FAILED
185 proto_init_update
"*" 0
186 proto_send_update
"$interface"
188 [ -n "$INCLUDE_ONLY" ] ||
{