3 [ -n "$INCLUDE_ONLY" ] ||
{
9 proto_ncm_init_config
() {
12 proto_config_add_string
"device:device"
13 proto_config_add_string apn
14 proto_config_add_string auth
15 proto_config_add_string username
16 proto_config_add_string password
17 proto_config_add_string pincode
18 proto_config_add_string delay
19 proto_config_add_string mode
20 proto_config_add_string pdptype
21 proto_config_add_int profile
22 proto_config_add_defaults
28 local manufacturer initialize setmode connect finalize ifname devname devpath
30 local device apn auth username password pincode delay mode pdptype profile
$PROTO_DEFAULT_OPTIONS
31 json_get_vars device apn auth username password pincode delay mode pdptype profile
$PROTO_DEFAULT_OPTIONS
33 [ "$metric" = "" ] && metric
="0"
35 [ -n "$profile" ] || profile
=1
37 pdptype
=$
(echo "$pdptype" |
awk '{print toupper($0)}')
38 [ "$pdptype" = "IP" -o "$pdptype" = "IPV6" -o "$pdptype" = "IPV4V6" ] || pdptype
="IP"
40 [ -n "$ctl_device" ] && device
=$ctl_device
43 echo "No control device specified"
44 proto_notify_error
"$interface" NO_DEVICE
45 proto_set_available
"$interface" 0
49 device
="$(readlink -f $device)"
51 echo "Control device not valid"
52 proto_set_available
"$interface" 0
56 devname
="$(basename "$device")"
59 devpath
="$(readlink -f /sys/class/tty/$devname/device)"
60 ifname
="$( ls "$devpath"/../../*/net )"
63 devpath
="$(readlink -f /sys/class/usbmisc/$devname/device/)"
64 ifname
="$( ls "$devpath"/net )"
68 echo "The interface could not be found."
69 proto_notify_error
"$interface" NO_IFACE
70 proto_set_available
"$interface" 0
74 [ -n "$delay" ] && sleep "$delay"
76 manufacturer
=$
(gcom
-d "$device" -s /etc
/gcom
/getcardinfo.gcom |
awk 'NF && $0 !~ /AT\+CGMI/ { sub(/\+CGMI: /,""); print tolower($1); exit; }')
77 [ $?
-ne 0 -o -z "$manufacturer" ] && {
78 echo "Failed to get modem information"
79 proto_notify_error
"$interface" GETINFO_FAILED
83 json_load
"$(cat /etc/gcom/ncm.json)"
84 json_select
"$manufacturer"
86 echo "Unsupported modem"
87 proto_notify_error
"$interface" UNSUPPORTED_MODEM
88 proto_set_available
"$interface" 0
92 json_get_values initialize initialize
93 for i
in $initialize; do
94 eval COMMAND
="$i" gcom
-d "$device" -s /etc
/gcom
/runcommand.gcom ||
{
95 echo "Failed to initialize modem"
96 proto_notify_error
"$interface" INITIALIZE_FAILED
101 [ -n "$pincode" ] && {
102 PINCODE
="$pincode" gcom
-d "$device" -s /etc
/gcom
/setpin.gcom ||
{
103 echo "Unable to verify PIN"
104 proto_notify_error
"$interface" PIN_FAILED
105 proto_block_restart
"$interface"
110 json_get_values configure configure
111 echo "Configuring modem"
112 for i
in $configure; do
113 eval COMMAND
="$i" gcom
-d "$device" -s /etc
/gcom
/runcommand.gcom ||
{
114 echo "Failed to configure modem"
115 proto_notify_error
"$interface" CONFIGURE_FAILED
122 json_get_var setmode
"$mode"
123 [ -n "$setmode" ] && {
125 eval COMMAND
="$setmode" gcom
-d "$device" -s /etc
/gcom
/runcommand.gcom ||
{
126 echo "Failed to set operating mode"
127 proto_notify_error
"$interface" SETMODE_FAILED
134 echo "Starting network $interface"
135 json_get_vars connect
136 [ -n "$connect" ] && {
137 echo "Connecting modem"
138 eval COMMAND
="$connect" gcom
-d "$device" -s /etc
/gcom
/runcommand.gcom ||
{
139 echo "Failed to connect"
140 proto_notify_error
"$interface" CONNECT_FAILED
145 json_get_vars finalize
147 echo "Setting up $ifname"
148 proto_init_update
"$ifname" 1
150 json_add_string
"manufacturer" "$manufacturer"
152 proto_send_update
"$interface"
154 local zone
="$(fw3 -q network "$interface" 2>/dev/null)"
156 [ "$pdptype" = "IP" -o "$pdptype" = "IPV4V6" ] && {
158 json_add_string name
"${interface}_4"
159 json_add_string ifname
"@$interface"
160 json_add_string proto
"dhcp"
161 proto_add_dynamic_defaults
163 json_add_string zone
"$zone"
166 ubus call network add_dynamic
"$(json_dump)"
169 [ "$pdptype" = "IPV6" -o "$pdptype" = "IPV4V6" ] && {
171 json_add_string name
"${interface}_6"
172 json_add_string ifname
"@$interface"
173 json_add_string proto
"dhcpv6"
174 json_add_string extendprefix
1
175 proto_add_dynamic_defaults
177 json_add_string zone
"$zone"
180 ubus call network add_dynamic
"$(json_dump)"
183 [ -n "$finalize" ] && {
184 eval COMMAND
="$finalize" gcom
-d "$device" -s /etc
/gcom
/runcommand.gcom ||
{
185 echo "Failed to configure modem"
186 proto_notify_error
"$interface" FINALIZE_FAILED
192 proto_ncm_teardown
() {
195 local manufacturer disconnect
198 json_get_vars device profile
200 [ -n "$ctl_device" ] && device
=$ctl_device
202 [ -n "$device" ] ||
{
203 echo "No control device specified"
204 proto_notify_error
"$interface" NO_DEVICE
205 proto_set_available
"$interface" 0
209 device
="$(readlink -f $device)"
210 [ -e "$device" ] ||
{
211 echo "Control device not valid"
212 proto_set_available
"$interface" 0
216 [ -n "$profile" ] || profile
=1
218 echo "Stopping network $interface"
220 json_load
"$(ubus call network.interface.$interface status)"
222 json_get_vars manufacturer
223 [ $?
-ne 0 -o -z "$manufacturer" ] && {
224 # Fallback to direct detect, for proper handle device replug.
225 manufacturer
=$
(gcom
-d "$device" -s /etc
/gcom
/getcardinfo.gcom |
awk 'NF && $0 !~ /AT\+CGMI/ { sub(/\+CGMI: /,""); print tolower($1); exit; }')
226 [ $?
-ne 0 -o -z "$manufacturer" ] && {
227 echo "Failed to get modem information"
228 proto_notify_error
"$interface" GETINFO_FAILED
231 json_add_string
"manufacturer" "$manufacturer"
234 json_load
"$(cat /etc/gcom/ncm.json)"
235 json_select
"$manufacturer" ||
{
236 echo "Unsupported modem"
237 proto_notify_error
"$interface" UNSUPPORTED_MODEM
241 json_get_vars disconnect
242 [ -n "$disconnect" ] && {
243 eval COMMAND
="$disconnect" gcom
-d "$device" -s /etc
/gcom
/runcommand.gcom ||
{
244 echo "Failed to disconnect"
245 proto_notify_error
"$interface" DISCONNECT_FAILED
250 proto_init_update
"*" 0
251 proto_send_update
"$interface"
253 [ -n "$INCLUDE_ONLY" ] ||
{