3 [ -n "$INCLUDE_ONLY" ] ||
{
9 proto_qmi_init_config
() {
12 proto_config_add_string
"device:device"
13 proto_config_add_string apn
14 proto_config_add_string auth
15 proto_config_add_string username
16 proto_config_add_string password
17 proto_config_add_string pincode
18 proto_config_add_int delay
19 proto_config_add_string modes
20 proto_config_add_string pdptype
21 proto_config_add_int profile
22 proto_config_add_boolean dhcp
23 proto_config_add_boolean dhcpv6
24 proto_config_add_boolean autoconnect
25 proto_config_add_int plmn
26 proto_config_add_int timeout
27 proto_config_add_int mtu
28 proto_config_add_defaults
33 local dataformat connstat plmn_mode mcc mnc
34 local device apn auth username password pincode delay modes pdptype
35 local profile dhcp dhcpv6 autoconnect plmn timeout mtu
$PROTO_DEFAULT_OPTIONS
36 local ip4table ip6table
37 local cid_4 pdh_4 cid_6 pdh_6
38 local ip_6 ip_prefix_length gateway_6 dns1_6 dns2_6
40 json_get_vars device apn auth username password pincode delay modes
41 json_get_vars pdptype profile dhcp dhcpv6 autoconnect plmn ip4table
42 json_get_vars ip6table timeout mtu
$PROTO_DEFAULT_OPTIONS
44 [ "$timeout" = "" ] && timeout
="10"
46 [ "$metric" = "" ] && metric
="0"
48 [ -n "$ctl_device" ] && device
=$ctl_device
51 echo "No control device specified"
52 proto_notify_error
"$interface" NO_DEVICE
53 proto_set_available
"$interface" 0
57 [ -n "$delay" ] && sleep "$delay"
59 device
="$(readlink -f $device)"
61 echo "The specified control device does not exist"
62 proto_notify_error
"$interface" NO_DEVICE
63 proto_set_available
"$interface" 0
67 devname
="$(basename "$device")"
68 devpath
="$(readlink -f /sys/class/usbmisc/$devname/device/)"
69 ifname
="$( ls "$devpath"/net )"
71 echo "The interface could not be found."
72 proto_notify_error
"$interface" NO_IFACE
73 proto_set_available
"$interface" 0
78 echo "Setting MTU to $mtu"
79 /sbin
/ip link
set dev
$ifname mtu
$mtu
82 echo "Waiting for SIM initialization"
83 local uninitialized_timeout
=0
84 while uqmi
-s -d "$device" --get-pin-status |
grep '"UIM uninitialized"' > /dev
/null
; do
85 [ -e "$device" ] ||
return 1
86 if [ "$uninitialized_timeout" -lt "$timeout" -o "$timeout" = "0" ]; then
87 let uninitialized_timeout
++
90 echo "SIM not initialized"
91 proto_notify_error
"$interface" SIM_NOT_INITIALIZED
92 proto_block_restart
"$interface"
97 if uqmi
-s -d "$device" --uim-get-sim-state |
grep -q '"Not supported"\|"Invalid QMI command"' &&
98 uqmi
-s -d "$device" --get-pin-status |
grep -q '"Not supported"\|"Invalid QMI command"' ; then
99 [ -n "$pincode" ] && {
100 uqmi
-s -d "$device" --verify-pin1 "$pincode" > /dev
/null || uqmi
-s -d "$device" --uim-verify-pin1 "$pincode" > /dev
/null ||
{
101 echo "Unable to verify PIN"
102 proto_notify_error
"$interface" PIN_FAILED
103 proto_block_restart
"$interface"
108 json_load
"$(uqmi -s -d "$device" --get-pin-status)"
109 json_get_var pin1_status pin1_status
110 if [ -z "$pin1_status" ]; then
111 json_load
"$(uqmi -s -d "$device" --uim-get-sim-state)"
112 json_get_var pin1_status pin1_status
114 json_get_var pin1_verify_tries pin1_verify_tries
116 case "$pin1_status" in
118 echo "PIN verification is disabled"
121 echo "SIM locked PUK required"
122 proto_notify_error
"$interface" PUK_NEEDED
123 proto_block_restart
"$interface"
127 [ "$pin1_verify_tries" -lt "3" ] && {
128 echo "PIN verify count value is $pin1_verify_tries this is below the limit of 3"
129 proto_notify_error
"$interface" PIN_TRIES_BELOW_LIMIT
130 proto_block_restart
"$interface"
133 if [ -n "$pincode" ]; then
134 uqmi
-s -d "$device" --verify-pin1 "$pincode" > /dev
/null
2>&1 || uqmi
-s -d "$device" --uim-verify-pin1 "$pincode" > /dev
/null
2>&1 ||
{
135 echo "Unable to verify PIN"
136 proto_notify_error
"$interface" PIN_FAILED
137 proto_block_restart
"$interface"
141 echo "PIN not specified but required"
142 proto_notify_error
"$interface" PIN_NOT_SPECIFIED
143 proto_block_restart
"$interface"
148 echo "PIN already verified"
151 echo "PIN status failed (${pin1_status:-sim_not_present})"
152 proto_notify_error
"$interface" PIN_STATUS_FAILED
153 proto_block_restart
"$interface"
160 if [ -n "$plmn" ]; then
161 json_load
"$(uqmi -s -d "$device" --get-plmn)"
162 json_get_var plmn_mode mode
163 json_get_vars mcc mnc ||
{
168 if [ "$plmn" = "0" ]; then
169 if [ "$plmn_mode" != "automatic" ]; then
172 echo "Setting PLMN to auto"
174 elif [ "$mcc" -ne "${plmn:0:3}" -o "$mnc" -ne "${plmn:3}" ]; then
177 echo "Setting PLMN to $plmn"
184 if [ -n "$mcc" -a -n "$mnc" ]; then
185 uqmi
-s -d "$device" --set-plmn --mcc "$mcc" --mnc "$mnc" > /dev
/null
2>&1 ||
{
186 echo "Unable to set PLMN"
187 proto_notify_error
"$interface" PLMN_FAILED
188 proto_block_restart
"$interface"
193 # Cleanup current state if any
194 uqmi
-s -d "$device" --stop-network 0xffffffff --autoconnect > /dev
/null
2>&1
197 uqmi
-s -d "$device" --set-device-operating-mode online
> /dev
/null
2>&1
200 uqmi
-s -d "$device" --set-data-format 802.3 > /dev
/null
2>&1
201 uqmi
-s -d "$device" --wda-set-data-format 802.3 > /dev
/null
2>&1
202 dataformat
="$(uqmi -s -d "$device" --wda-get-data-format)"
204 if [ "$dataformat" = '"raw-ip"' ]; then
206 [ -f /sys
/class
/net
/$ifname/qmi
/raw_ip
] ||
{
207 echo "Device only supports raw-ip mode but is missing this required driver attribute: /sys/class/net/$ifname/qmi/raw_ip"
211 echo "Device does not support 802.3 mode. Informing driver of raw-ip only for $ifname .."
212 echo "Y" > /sys
/class
/net
/$ifname/qmi
/raw_ip
215 uqmi
-s -d "$device" --sync > /dev
/null
2>&1
217 uqmi
-s -d "$device" --network-register > /dev
/null
2>&1
219 echo "Waiting for network registration"
221 local registration_timeout
=0
222 local registration_state
=""
224 registration_state
=$
(uqmi
-s -d "$device" --get-serving-system 2>/dev
/null | jsonfilter
-e "@.registration" 2>/dev
/null
)
226 [ "$registration_state" = "registered" ] && break
228 if [ "$registration_state" = "searching" ] ||
[ "$registration_state" = "not_registered" ]; then
229 if [ "$registration_timeout" -lt "$timeout" ] ||
[ "$timeout" = "0" ]; then
230 [ "$registration_state" = "searching" ] ||
{
231 echo "Device stopped network registration. Restart network registration"
232 uqmi
-s -d "$device" --network-register > /dev
/null
2>&1
234 let registration_timeout
++
238 echo "Network registration failed, registration timeout reached"
240 # registration_state is 'registration_denied' or 'unknown' or ''
241 echo "Network registration failed (reason: '$registration_state')"
244 proto_notify_error
"$interface" NETWORK_REGISTRATION_FAILED
245 proto_block_restart
"$interface"
249 [ -n "$modes" ] && uqmi
-s -d "$device" --set-network-modes "$modes" > /dev
/null
2>&1
251 echo "Starting network $interface"
253 pdptype
="$(echo "$pdptype" | awk '{print tolower($0)}')"
255 [ "$pdptype" = "ip" -o "$pdptype" = "ipv6" -o "$pdptype" = "ipv4v6" ] || pdptype
="ip"
257 if [ "$pdptype" = "ip" ]; then
258 [ -z "$autoconnect" ] && autoconnect
=1
259 [ "$autoconnect" = 0 ] && autoconnect
=""
261 [ "$autoconnect" = 1 ] || autoconnect
=""
264 [ "$pdptype" = "ip" -o "$pdptype" = "ipv4v6" ] && {
265 cid_4
=$
(uqmi
-s -d "$device" --get-client-id wds
)
266 if ! [ "$cid_4" -eq "$cid_4" ] 2> /dev
/null
; then
267 echo "Unable to obtain client ID"
268 proto_notify_error
"$interface" NO_CID
272 uqmi
-s -d "$device" --set-client-id wds
,"$cid_4" --set-ip-family ipv4
> /dev
/null
2>&1
274 pdh_4
=$
(uqmi
-s -d "$device" --set-client-id wds
,"$cid_4" \
277 ${profile:+--profile $profile} \
278 ${auth:+--auth-type $auth} \
279 ${username:+--username $username} \
280 ${password:+--password $password} \
281 ${autoconnect:+--autoconnect})
283 # pdh_4 is a numeric value on success
284 if ! [ "$pdh_4" -eq "$pdh_4" ] 2> /dev
/null
; then
285 echo "Unable to connect IPv4"
286 uqmi
-s -d "$device" --set-client-id wds
,"$cid_4" --release-client-id wds
> /dev
/null
2>&1
287 proto_notify_error
"$interface" CALL_FAILED
291 # Check data connection state
292 connstat
=$
(uqmi
-s -d "$device" --set-client-id wds
,"$cid_4" --get-data-status)
293 [ "$connstat" == '"connected"' ] ||
{
295 uqmi
-s -d "$device" --set-client-id wds
,"$cid_4" --release-client-id wds
> /dev
/null
2>&1
296 proto_notify_error
"$interface" CALL_FAILED
301 [ "$pdptype" = "ipv6" -o "$pdptype" = "ipv4v6" ] && {
302 cid_6
=$
(uqmi
-s -d "$device" --get-client-id wds
)
303 if ! [ "$cid_6" -eq "$cid_6" ] 2> /dev
/null
; then
304 echo "Unable to obtain client ID"
305 proto_notify_error
"$interface" NO_CID
309 uqmi
-s -d "$device" --set-client-id wds
,"$cid_6" --set-ip-family ipv6
> /dev
/null
2>&1
311 pdh_6
=$
(uqmi
-s -d "$device" --set-client-id wds
,"$cid_6" \
314 ${profile:+--profile $profile} \
315 ${auth:+--auth-type $auth} \
316 ${username:+--username $username} \
317 ${password:+--password $password} \
318 ${autoconnect:+--autoconnect})
320 # pdh_6 is a numeric value on success
321 if ! [ "$pdh_6" -eq "$pdh_6" ] 2> /dev
/null
; then
322 echo "Unable to connect IPv6"
323 uqmi
-s -d "$device" --set-client-id wds
,"$cid_6" --release-client-id wds
> /dev
/null
2>&1
324 proto_notify_error
"$interface" CALL_FAILED
328 # Check data connection state
329 connstat
=$
(uqmi
-s -d "$device" --set-client-id wds
,"$cid_6" --set-ip-family ipv6
--get-data-status)
330 [ "$connstat" == '"connected"' ] ||
{
332 uqmi
-s -d "$device" --set-client-id wds
,"$cid_6" --release-client-id wds
> /dev
/null
2>&1
333 proto_notify_error
"$interface" CALL_FAILED
338 echo "Setting up $ifname"
339 proto_init_update
"$ifname" 1
343 json_add_string
"cid_4" "$cid_4"
344 json_add_string
"pdh_4" "$pdh_4"
347 json_add_string
"cid_6" "$cid_6"
348 json_add_string
"pdh_6" "$pdh_6"
351 proto_send_update
"$interface"
353 local zone
="$(fw3 -q network "$interface" 2>/dev/null)"
356 if [ -z "$dhcpv6" -o "$dhcpv6" = 0 ]; then
357 json_load
"$(uqmi -s -d $device --set-client-id wds,$cid_6 --get-current-settings)"
360 json_get_var gateway_6 gateway
361 json_get_var dns1_6 dns1
362 json_get_var dns2_6 dns2
363 json_get_var ip_prefix_length ip-prefix-length
365 proto_init_update
"$ifname" 1
367 proto_add_ipv6_address
"$ip_6" "128"
368 proto_add_ipv6_prefix
"${ip_6}/${ip_prefix_length}"
369 proto_add_ipv6_route
"$gateway_6" "128"
370 [ "$defaultroute" = 0 ] || proto_add_ipv6_route
"::0" 0 "$gateway_6" "" "" "${ip_6}/${ip_prefix_length}"
371 [ "$peerdns" = 0 ] ||
{
372 proto_add_dns_server
"$dns1_6"
373 proto_add_dns_server
"$dns2_6"
377 json_add_string zone
"$zone"
380 proto_send_update
"$interface"
383 json_add_string name
"${interface}_6"
384 json_add_string ifname
"@$interface"
385 json_add_string proto
"dhcpv6"
386 [ -n "$ip6table" ] && json_add_string ip6table
"$ip6table"
387 proto_add_dynamic_defaults
388 # RFC 7278: Extend an IPv6 /64 Prefix to LAN
389 json_add_string extendprefix
1
390 [ -n "$zone" ] && json_add_string zone
"$zone"
392 ubus call network add_dynamic
"$(json_dump)"
397 if [ "$dhcp" = 0 ]; then
398 json_load
"$(uqmi -s -d $device --set-client-id wds,$cid_4 --get-current-settings)"
401 json_get_var gateway_4 gateway
402 json_get_var dns1_4 dns1
403 json_get_var dns2_4 dns2
404 json_get_var subnet_4 subnet
406 proto_init_update
"$ifname" 1
408 proto_add_ipv4_address
"$ip_4" "$subnet_4"
409 proto_add_ipv4_route
"$gateway_4" "128"
410 [ "$defaultroute" = 0 ] || proto_add_ipv4_route
"0.0.0.0" 0 "$gateway_4"
411 [ "$peerdns" = 0 ] ||
{
412 proto_add_dns_server
"$dns1_4"
413 proto_add_dns_server
"$dns2_4"
417 json_add_string zone
"$zone"
420 proto_send_update
"$interface"
423 json_add_string name
"${interface}_4"
424 json_add_string ifname
"@$interface"
425 json_add_string proto
"dhcp"
426 [ -n "$ip4table" ] && json_add_string ip4table
"$ip4table"
427 proto_add_dynamic_defaults
428 [ -n "$zone" ] && json_add_string zone
"$zone"
430 ubus call network add_dynamic
"$(json_dump)"
439 [ -n "$cid" ] ||
return
441 uqmi
-s -d "$device" --set-client-id wds
,"$cid" \
442 --stop-network 0xffffffff \
443 --autoconnect > /dev
/null
2>&1
446 uqmi
-s -d "$device" --set-client-id wds
,"$cid" \
447 --stop-network "$pdh" > /dev
/null
2>&1
450 uqmi
-s -d "$device" --set-client-id wds
,"$cid" \
451 --release-client-id wds
> /dev
/null
2>&1
454 proto_qmi_teardown
() {
457 local device cid_4 pdh_4 cid_6 pdh_6
460 [ -n "$ctl_device" ] && device
=$ctl_device
462 echo "Stopping network $interface"
464 json_load
"$(ubus call network.interface.$interface status)"
466 json_get_vars cid_4 pdh_4 cid_6 pdh_6
468 qmi_wds_stop
"$cid_4" "$pdh_4"
469 qmi_wds_stop
"$cid_6" "$pdh_6"
471 proto_init_update
"*" 0
472 proto_send_update
"$interface"
475 [ -n "$INCLUDE_ONLY" ] ||
{