3 [ -n "$INCLUDE_ONLY" ] ||
{
9 proto_qmi_init_config
() {
12 proto_config_add_string
"device:device"
13 proto_config_add_string apn
14 proto_config_add_string v6apn
15 proto_config_add_string auth
16 proto_config_add_string username
17 proto_config_add_string password
18 proto_config_add_string pincode
19 proto_config_add_int delay
20 proto_config_add_string modes
21 proto_config_add_string pdptype
22 proto_config_add_int profile
23 proto_config_add_int v6profile
24 proto_config_add_boolean dhcp
25 proto_config_add_boolean dhcpv6
26 proto_config_add_boolean autoconnect
27 proto_config_add_int plmn
28 proto_config_add_int timeout
29 proto_config_add_int mtu
30 proto_config_add_defaults
35 local dataformat connstat plmn_mode mcc mnc
36 local device apn v6apn auth username password pincode delay modes pdptype
37 local profile v6profile dhcp dhcpv6 autoconnect plmn timeout mtu
$PROTO_DEFAULT_OPTIONS
38 local ip4table ip6table
39 local cid_4 pdh_4 cid_6 pdh_6
40 local ip_6 ip_prefix_length gateway_6 dns1_6 dns2_6
42 json_get_vars device apn v6apn auth username password pincode delay modes
43 json_get_vars pdptype profile v6profile dhcp dhcpv6 autoconnect plmn ip4table
44 json_get_vars ip6table timeout mtu
$PROTO_DEFAULT_OPTIONS
46 [ "$timeout" = "" ] && timeout
="10"
48 [ "$metric" = "" ] && metric
="0"
50 [ -n "$ctl_device" ] && device
=$ctl_device
53 echo "No control device specified"
54 proto_notify_error
"$interface" NO_DEVICE
55 proto_set_available
"$interface" 0
59 [ -n "$delay" ] && sleep "$delay"
61 device
="$(readlink -f $device)"
63 echo "The specified control device does not exist"
64 proto_notify_error
"$interface" NO_DEVICE
65 proto_set_available
"$interface" 0
69 devname
="$(basename "$device")"
70 devpath
="$(readlink -f /sys/class/usbmisc/$devname/device/)"
71 ifname
="$( ls "$devpath"/net )"
73 echo "The interface could not be found."
74 proto_notify_error
"$interface" NO_IFACE
75 proto_set_available
"$interface" 0
80 echo "Setting MTU to $mtu"
81 /sbin
/ip link
set dev
$ifname mtu
$mtu
84 echo "Waiting for SIM initialization"
85 local uninitialized_timeout
=0
86 # timeout 3s for first call to avoid hanging uqmi
87 uqmi
-d "$device" --get-pin-status -t 3000 > /dev
/null
2>&1
88 while uqmi
-s -d "$device" --get-pin-status |
grep '"UIM uninitialized"' > /dev
/null
; do
89 [ -e "$device" ] ||
return 1
90 if [ "$uninitialized_timeout" -lt "$timeout" -o "$timeout" = "0" ]; then
91 let uninitialized_timeout
++
94 echo "SIM not initialized"
95 proto_notify_error
"$interface" SIM_NOT_INITIALIZED
96 proto_block_restart
"$interface"
101 # Check if UIM application is stuck in illegal state
102 local uim_state_timeout
=0
104 json_load
"$(uqmi -s -d "$device" --uim-get-sim-state)"
105 json_get_var card_application_state card_application_state
107 # SIM card is either completely absent or state is labeled as illegal
108 # Try to power-cycle the SIM card to recover from this state
109 if [ -z "$card_application_state" -o "$card_application_state" = "illegal" ]; then
110 echo "SIM in illegal state - Power-cycling SIM"
112 # Try to reset SIM application
113 uqmi
-d "$device" --uim-power-off --uim-slot 1
115 uqmi
-d "$device" --uim-power-on --uim-slot 1
117 if [ "$uim_state_timeout" -lt "$timeout" ] ||
[ "$timeout" = "0" ]; then
118 let uim_state_timeout
++
124 proto_notify_error
"$interface" SIM_ILLEGAL_STATE
125 proto_block_restart
"$interface"
132 if uqmi
-s -d "$device" --uim-get-sim-state |
grep -q '"Not supported"\|"Invalid QMI command"' &&
133 uqmi
-s -d "$device" --get-pin-status |
grep -q '"Not supported"\|"Invalid QMI command"' ; then
134 [ -n "$pincode" ] && {
135 uqmi
-s -d "$device" --verify-pin1 "$pincode" > /dev
/null || uqmi
-s -d "$device" --uim-verify-pin1 "$pincode" > /dev
/null ||
{
136 echo "Unable to verify PIN"
137 proto_notify_error
"$interface" PIN_FAILED
138 proto_block_restart
"$interface"
143 json_load
"$(uqmi -s -d "$device" --get-pin-status)"
144 json_get_var pin1_status pin1_status
145 if [ -z "$pin1_status" ]; then
146 json_load
"$(uqmi -s -d "$device" --uim-get-sim-state)"
147 json_get_var pin1_status pin1_status
149 json_get_var pin1_verify_tries pin1_verify_tries
151 case "$pin1_status" in
153 echo "PIN verification is disabled"
156 echo "SIM locked PUK required"
157 proto_notify_error
"$interface" PUK_NEEDED
158 proto_block_restart
"$interface"
162 [ "$pin1_verify_tries" -lt "3" ] && {
163 echo "PIN verify count value is $pin1_verify_tries this is below the limit of 3"
164 proto_notify_error
"$interface" PIN_TRIES_BELOW_LIMIT
165 proto_block_restart
"$interface"
168 if [ -n "$pincode" ]; then
169 uqmi
-s -d "$device" --verify-pin1 "$pincode" > /dev
/null
2>&1 || uqmi
-s -d "$device" --uim-verify-pin1 "$pincode" > /dev
/null
2>&1 ||
{
170 echo "Unable to verify PIN"
171 proto_notify_error
"$interface" PIN_FAILED
172 proto_block_restart
"$interface"
176 echo "PIN not specified but required"
177 proto_notify_error
"$interface" PIN_NOT_SPECIFIED
178 proto_block_restart
"$interface"
183 echo "PIN already verified"
186 echo "PIN status failed (${pin1_status:-sim_not_present})"
187 proto_notify_error
"$interface" PIN_STATUS_FAILED
188 proto_block_restart
"$interface"
195 if [ -n "$plmn" ]; then
196 json_load
"$(uqmi -s -d "$device" --get-plmn)"
197 json_get_var plmn_mode mode
198 json_get_vars mcc mnc ||
{
203 if [ "$plmn" = "0" ]; then
204 if [ "$plmn_mode" != "automatic" ]; then
207 echo "Setting PLMN to auto"
209 elif [ "$mcc" -ne "${plmn:0:3}" -o "$mnc" -ne "${plmn:3}" ]; then
212 echo "Setting PLMN to $plmn"
219 # Cleanup current state if any
220 uqmi
-s -d "$device" --stop-network 0xffffffff --autoconnect > /dev
/null
2>&1
221 uqmi
-s -d "$device" --set-ip-family ipv6
--stop-network 0xffffffff --autoconnect > /dev
/null
2>&1
224 uqmi
-s -d "$device" --set-device-operating-mode online
> /dev
/null
2>&1
227 uqmi
-s -d "$device" --set-data-format 802.3 > /dev
/null
2>&1
228 uqmi
-s -d "$device" --wda-set-data-format 802.3 > /dev
/null
2>&1
229 dataformat
="$(uqmi -s -d "$device" --wda-get-data-format)"
231 if [ "$dataformat" = '"raw-ip"' ]; then
233 [ -f /sys
/class
/net
/$ifname/qmi
/raw_ip
] ||
{
234 echo "Device only supports raw-ip mode but is missing this required driver attribute: /sys/class/net/$ifname/qmi/raw_ip"
238 echo "Device does not support 802.3 mode. Informing driver of raw-ip only for $ifname .."
239 echo "Y" > /sys
/class
/net
/$ifname/qmi
/raw_ip
242 uqmi
-s -d "$device" --sync > /dev
/null
2>&1
244 uqmi
-s -d "$device" --network-register > /dev
/null
2>&1
246 # PLMN selection must happen after the call to network-register
247 if [ -n "$mcc" -a -n "$mnc" ]; then
248 uqmi
-s -d "$device" --set-plmn --mcc "$mcc" --mnc "$mnc" > /dev
/null
2>&1 ||
{
249 echo "Unable to set PLMN"
250 proto_notify_error
"$interface" PLMN_FAILED
251 proto_block_restart
"$interface"
257 uqmi
-s -d "$device" --set-network-modes "$modes" > /dev
/null
2>&1
259 # Scan network to not rely on registration-timeout after RAT change
260 uqmi
-s -d "$device" --network-scan > /dev
/null
2>&1
263 echo "Waiting for network registration"
265 local registration_timeout
=0
266 local registration_state
=""
268 registration_state
=$
(uqmi
-s -d "$device" --get-serving-system 2>/dev
/null | jsonfilter
-e "@.registration" 2>/dev
/null
)
270 [ "$registration_state" = "registered" ] && break
272 if [ "$registration_state" = "searching" ] ||
[ "$registration_state" = "not_registered" ]; then
273 if [ "$registration_timeout" -lt "$timeout" ] ||
[ "$timeout" = "0" ]; then
274 [ "$registration_state" = "searching" ] ||
{
275 echo "Device stopped network registration. Restart network registration"
276 uqmi
-s -d "$device" --network-register > /dev
/null
2>&1
278 let registration_timeout
++
282 echo "Network registration failed, registration timeout reached"
284 # registration_state is 'registration_denied' or 'unknown' or ''
285 echo "Network registration failed (reason: '$registration_state')"
288 proto_notify_error
"$interface" NETWORK_REGISTRATION_FAILED
293 echo "Starting network $interface"
295 pdptype
="$(echo "$pdptype" | awk '{print tolower($0)}')"
297 [ "$pdptype" = "ip" -o "$pdptype" = "ipv6" -o "$pdptype" = "ipv4v6" ] || pdptype
="ip"
299 if [ "$pdptype" = "ip" ]; then
300 [ -z "$autoconnect" ] && autoconnect
=1
301 [ "$autoconnect" = 0 ] && autoconnect
=""
303 [ "$autoconnect" = 1 ] || autoconnect
=""
306 [ "$pdptype" = "ip" -o "$pdptype" = "ipv4v6" ] && {
307 cid_4
=$
(uqmi
-s -d "$device" --get-client-id wds
)
308 if ! [ "$cid_4" -eq "$cid_4" ] 2> /dev
/null
; then
309 echo "Unable to obtain client ID"
310 proto_notify_error
"$interface" NO_CID
314 uqmi
-s -d "$device" --set-client-id wds
,"$cid_4" --set-ip-family ipv4
> /dev
/null
2>&1
316 pdh_4
=$
(uqmi
-s -d "$device" --set-client-id wds
,"$cid_4" \
319 ${profile:+--profile $profile} \
320 ${auth:+--auth-type $auth} \
321 ${username:+--username $username} \
322 ${password:+--password $password} \
323 ${autoconnect:+--autoconnect})
325 # pdh_4 is a numeric value on success
326 if ! [ "$pdh_4" -eq "$pdh_4" ] 2> /dev
/null
; then
327 echo "Unable to connect IPv4"
328 uqmi
-s -d "$device" --set-client-id wds
,"$cid_4" --release-client-id wds
> /dev
/null
2>&1
329 proto_notify_error
"$interface" CALL_FAILED
333 # Check data connection state
334 connstat
=$
(uqmi
-s -d "$device" --set-client-id wds
,"$cid_4" --get-data-status)
335 [ "$connstat" == '"connected"' ] ||
{
337 uqmi
-s -d "$device" --set-client-id wds
,"$cid_4" --release-client-id wds
> /dev
/null
2>&1
338 proto_notify_error
"$interface" CALL_FAILED
343 [ "$pdptype" = "ipv6" -o "$pdptype" = "ipv4v6" ] && {
344 cid_6
=$
(uqmi
-s -d "$device" --get-client-id wds
)
345 if ! [ "$cid_6" -eq "$cid_6" ] 2> /dev
/null
; then
346 echo "Unable to obtain client ID"
347 proto_notify_error
"$interface" NO_CID
351 uqmi
-s -d "$device" --set-client-id wds
,"$cid_6" --set-ip-family ipv6
> /dev
/null
2>&1
354 : "${v6profile:=${profile}}"
356 pdh_6
=$
(uqmi
-s -d "$device" --set-client-id wds
,"$cid_6" \
358 ${v6apn:+--apn $v6apn} \
359 ${v6profile:+--profile $v6profile} \
360 ${auth:+--auth-type $auth} \
361 ${username:+--username $username} \
362 ${password:+--password $password} \
363 ${autoconnect:+--autoconnect})
365 # pdh_6 is a numeric value on success
366 if ! [ "$pdh_6" -eq "$pdh_6" ] 2> /dev
/null
; then
367 echo "Unable to connect IPv6"
368 uqmi
-s -d "$device" --set-client-id wds
,"$cid_6" --release-client-id wds
> /dev
/null
2>&1
369 proto_notify_error
"$interface" CALL_FAILED
373 # Check data connection state
374 connstat
=$
(uqmi
-s -d "$device" --set-client-id wds
,"$cid_6" --set-ip-family ipv6
--get-data-status)
375 [ "$connstat" == '"connected"' ] ||
{
377 uqmi
-s -d "$device" --set-client-id wds
,"$cid_6" --release-client-id wds
> /dev
/null
2>&1
378 proto_notify_error
"$interface" CALL_FAILED
383 echo "Setting up $ifname"
384 proto_init_update
"$ifname" 1
388 json_add_string
"cid_4" "$cid_4"
389 json_add_string
"pdh_4" "$pdh_4"
392 json_add_string
"cid_6" "$cid_6"
393 json_add_string
"pdh_6" "$pdh_6"
396 proto_send_update
"$interface"
398 local zone
="$(fw3 -q network "$interface" 2>/dev/null)"
401 if [ -z "$dhcpv6" -o "$dhcpv6" = 0 ]; then
402 json_load
"$(uqmi -s -d $device --set-client-id wds,$cid_6 --get-current-settings)"
405 json_get_var gateway_6 gateway
406 json_get_var dns1_6 dns1
407 json_get_var dns2_6 dns2
408 json_get_var ip_prefix_length ip-prefix-length
410 proto_init_update
"$ifname" 1
412 proto_add_ipv6_address
"$ip_6" "128"
413 proto_add_ipv6_prefix
"${ip_6}/${ip_prefix_length}"
414 proto_add_ipv6_route
"$gateway_6" "128"
415 [ "$defaultroute" = 0 ] || proto_add_ipv6_route
"::0" 0 "$gateway_6" "" "" "${ip_6}/${ip_prefix_length}"
416 [ "$peerdns" = 0 ] ||
{
417 proto_add_dns_server
"$dns1_6"
418 proto_add_dns_server
"$dns2_6"
422 json_add_string zone
"$zone"
425 proto_send_update
"$interface"
428 json_add_string name
"${interface}_6"
429 json_add_string ifname
"@$interface"
430 [ "$pdptype" = "ipv4v6" ] && json_add_string iface_464xlat
"0"
431 json_add_string proto
"dhcpv6"
432 [ -n "$ip6table" ] && json_add_string ip6table
"$ip6table"
433 proto_add_dynamic_defaults
434 # RFC 7278: Extend an IPv6 /64 Prefix to LAN
435 json_add_string extendprefix
1
436 [ -n "$zone" ] && json_add_string zone
"$zone"
438 ubus call network add_dynamic
"$(json_dump)"
443 if [ "$dhcp" = 0 ]; then
444 json_load
"$(uqmi -s -d $device --set-client-id wds,$cid_4 --get-current-settings)"
447 json_get_var gateway_4 gateway
448 json_get_var dns1_4 dns1
449 json_get_var dns2_4 dns2
450 json_get_var subnet_4 subnet
452 proto_init_update
"$ifname" 1
454 proto_add_ipv4_address
"$ip_4" "$subnet_4"
455 proto_add_ipv4_route
"$gateway_4" "128"
456 [ "$defaultroute" = 0 ] || proto_add_ipv4_route
"0.0.0.0" 0 "$gateway_4"
457 [ "$peerdns" = 0 ] ||
{
458 proto_add_dns_server
"$dns1_4"
459 proto_add_dns_server
"$dns2_4"
463 json_add_string zone
"$zone"
466 proto_send_update
"$interface"
469 json_add_string name
"${interface}_4"
470 json_add_string ifname
"@$interface"
471 json_add_string proto
"dhcp"
472 [ -n "$ip4table" ] && json_add_string ip4table
"$ip4table"
473 proto_add_dynamic_defaults
474 [ -n "$zone" ] && json_add_string zone
"$zone"
476 ubus call network add_dynamic
"$(json_dump)"
485 [ -n "$cid" ] ||
return
487 uqmi
-s -d "$device" --set-client-id wds
,"$cid" \
488 --stop-network 0xffffffff \
489 --autoconnect > /dev
/null
2>&1
492 uqmi
-s -d "$device" --set-client-id wds
,"$cid" \
493 --stop-network "$pdh" > /dev
/null
2>&1
496 uqmi
-s -d "$device" --set-client-id wds
,"$cid" \
497 --release-client-id wds
> /dev
/null
2>&1
500 proto_qmi_teardown
() {
503 local device cid_4 pdh_4 cid_6 pdh_6
506 [ -n "$ctl_device" ] && device
=$ctl_device
508 echo "Stopping network $interface"
510 json_load
"$(ubus call network.interface.$interface status)"
512 json_get_vars cid_4 pdh_4 cid_6 pdh_6
514 qmi_wds_stop
"$cid_4" "$pdh_4"
515 qmi_wds_stop
"$cid_6" "$pdh_6"
517 proto_init_update
"*" 0
518 proto_send_update
"$interface"
521 [ -n "$INCLUDE_ONLY" ] ||
{