3 [ -n "$INCLUDE_ONLY" ] ||
{
9 proto_qmi_init_config
() {
12 proto_config_add_string
"device:device"
13 proto_config_add_string apn
14 proto_config_add_string auth
15 proto_config_add_string username
16 proto_config_add_string password
17 proto_config_add_string pincode
18 proto_config_add_int delay
19 proto_config_add_string modes
20 proto_config_add_string pdptype
21 proto_config_add_int profile
22 proto_config_add_boolean dhcp
23 proto_config_add_boolean dhcpv6
24 proto_config_add_boolean autoconnect
25 proto_config_add_int plmn
26 proto_config_add_int timeout
27 proto_config_add_int mtu
28 proto_config_add_defaults
33 local dataformat connstat plmn_mode mcc mnc
34 local device apn auth username password pincode delay modes pdptype
35 local profile dhcp dhcpv6 autoconnect plmn timeout mtu
$PROTO_DEFAULT_OPTIONS
36 local ip4table ip6table
37 local cid_4 pdh_4 cid_6 pdh_6
38 local ip_6 ip_prefix_length gateway_6 dns1_6 dns2_6
40 json_get_vars device apn auth username password pincode delay modes
41 json_get_vars pdptype profile dhcp dhcpv6 autoconnect plmn ip4table
42 json_get_vars ip6table timeout mtu
$PROTO_DEFAULT_OPTIONS
44 [ "$timeout" = "" ] && timeout
="10"
46 [ "$metric" = "" ] && metric
="0"
48 [ -n "$ctl_device" ] && device
=$ctl_device
51 echo "No control device specified"
52 proto_notify_error
"$interface" NO_DEVICE
53 proto_set_available
"$interface" 0
57 [ -n "$delay" ] && sleep "$delay"
59 device
="$(readlink -f $device)"
61 echo "The specified control device does not exist"
62 proto_notify_error
"$interface" NO_DEVICE
63 proto_set_available
"$interface" 0
67 devname
="$(basename "$device")"
68 devpath
="$(readlink -f /sys/class/usbmisc/$devname/device/)"
69 ifname
="$( ls "$devpath"/net )"
71 echo "The interface could not be found."
72 proto_notify_error
"$interface" NO_IFACE
73 proto_set_available
"$interface" 0
78 echo "Setting MTU to $mtu"
79 /sbin
/ip link
set dev
$ifname mtu
$mtu
82 echo "Waiting for SIM initialization"
83 local uninitialized_timeout
=0
84 while uqmi
-s -d "$device" --get-pin-status |
grep '"UIM uninitialized"' > /dev
/null
; do
85 [ -e "$device" ] ||
return 1
86 if [ "$uninitialized_timeout" -lt "$timeout" -o "$timeout" = "0" ]; then
87 let uninitialized_timeout
++
90 echo "SIM not initialized"
91 proto_notify_error
"$interface" SIM_NOT_INITIALIZED
92 proto_block_restart
"$interface"
97 if uqmi
-s -d "$device" --get-pin-status |
grep '"Not supported"\|"Invalid QMI command"' > /dev
/null
; then
98 [ -n "$pincode" ] && {
99 uqmi
-s -d "$device" --verify-pin1 "$pincode" > /dev
/null || uqmi
-s -d "$device" --uim-verify-pin1 "$pincode" > /dev
/null ||
{
100 echo "Unable to verify PIN"
101 proto_notify_error
"$interface" PIN_FAILED
102 proto_block_restart
"$interface"
107 .
/usr
/share
/libubox
/jshn.sh
108 json_load
"$(uqmi -s -d "$device" --get-pin-status)"
109 json_get_var pin1_status pin1_status
110 json_get_var pin1_verify_tries pin1_verify_tries
112 case "$pin1_status" in
114 echo "PIN verification is disabled"
117 echo "SIM locked PUK required"
118 proto_notify_error
"$interface" PUK_NEEDED
119 proto_block_restart
"$interface"
123 [ "$pin1_verify_tries" -lt "3" ] && {
124 echo "PIN verify count value is $pin1_verify_tries this is below the limit of 3"
125 proto_notify_error
"$interface" PIN_TRIES_BELOW_LIMIT
126 proto_block_restart
"$interface"
129 if [ -n "$pincode" ]; then
130 uqmi
-s -d "$device" --verify-pin1 "$pincode" > /dev
/null
2>&1 || uqmi
-s -d "$device" --uim-verify-pin1 "$pincode" > /dev
/null
2>&1 ||
{
131 echo "Unable to verify PIN"
132 proto_notify_error
"$interface" PIN_FAILED
133 proto_block_restart
"$interface"
137 echo "PIN not specified but required"
138 proto_notify_error
"$interface" PIN_NOT_SPECIFIED
139 proto_block_restart
"$interface"
144 echo "PIN already verified"
147 echo "PIN status failed ($pin1_status)"
148 proto_notify_error
"$interface" PIN_STATUS_FAILED
149 proto_block_restart
"$interface"
155 if [ -n "$plmn" ]; then
156 json_load
"$(uqmi -s -d "$device" --get-plmn)"
157 json_get_var plmn_mode mode
158 json_get_vars mcc mnc ||
{
163 if [ "$plmn" = "0" ]; then
164 if [ "$plmn_mode" != "automatic" ]; then
167 echo "Setting PLMN to auto"
169 elif [ "$mcc" -ne "${plmn:0:3}" -o "$mnc" -ne "${plmn:3}" ]; then
172 echo "Setting PLMN to $plmn"
179 if [ -n "$mcc" -a -n "$mnc" ]; then
180 uqmi
-s -d "$device" --set-plmn --mcc "$mcc" --mnc "$mnc" > /dev
/null
2>&1 ||
{
181 echo "Unable to set PLMN"
182 proto_notify_error
"$interface" PLMN_FAILED
183 proto_block_restart
"$interface"
188 # Cleanup current state if any
189 uqmi
-s -d "$device" --stop-network 0xffffffff --autoconnect > /dev
/null
2>&1
192 uqmi
-s -d "$device" --set-device-operating-mode online
> /dev
/null
2>&1
195 uqmi
-s -d "$device" --set-data-format 802.3 > /dev
/null
2>&1
196 uqmi
-s -d "$device" --wda-set-data-format 802.3 > /dev
/null
2>&1
197 dataformat
="$(uqmi -s -d "$device" --wda-get-data-format)"
199 if [ "$dataformat" = '"raw-ip"' ]; then
201 [ -f /sys
/class
/net
/$ifname/qmi
/raw_ip
] ||
{
202 echo "Device only supports raw-ip mode but is missing this required driver attribute: /sys/class/net/$ifname/qmi/raw_ip"
206 echo "Device does not support 802.3 mode. Informing driver of raw-ip only for $ifname .."
207 echo "Y" > /sys
/class
/net
/$ifname/qmi
/raw_ip
210 uqmi
-s -d "$device" --sync > /dev
/null
2>&1
212 echo "Waiting for network registration"
213 local registration_timeout
=0
214 while uqmi
-s -d "$device" --get-serving-system |
grep '"searching"' > /dev
/null
; do
215 [ -e "$device" ] ||
return 1
216 if [ "$registration_timeout" -lt "$timeout" -o "$timeout" = "0" ]; then
217 let registration_timeout
++
220 echo "Network registration failed"
221 proto_notify_error
"$interface" NETWORK_REGISTRATION_FAILED
222 proto_block_restart
"$interface"
227 [ -n "$modes" ] && uqmi
-s -d "$device" --set-network-modes "$modes" > /dev
/null
2>&1
229 echo "Starting network $interface"
231 pdptype
=$
(echo "$pdptype" |
awk '{print tolower($0)}')
232 [ "$pdptype" = "ip" -o "$pdptype" = "ipv6" -o "$pdptype" = "ipv4v6" ] || pdptype
="ip"
234 if [ "$pdptype" = "ip" ]; then
235 [ -z "$autoconnect" ] && autoconnect
=1
236 [ "$autoconnect" = 0 ] && autoconnect
=""
238 [ "$autoconnect" = 1 ] || autoconnect
=""
241 [ "$pdptype" = "ip" -o "$pdptype" = "ipv4v6" ] && {
242 cid_4
=$
(uqmi
-s -d "$device" --get-client-id wds
)
243 if ! [ "$cid_4" -eq "$cid_4" ] 2> /dev
/null
; then
244 echo "Unable to obtain client ID"
245 proto_notify_error
"$interface" NO_CID
249 uqmi
-s -d "$device" --set-client-id wds
,"$cid_4" --set-ip-family ipv4
> /dev
/null
2>&1
251 pdh_4
=$
(uqmi
-s -d "$device" --set-client-id wds
,"$cid_4" \
254 ${profile:+--profile $profile} \
255 ${auth:+--auth-type $auth} \
256 ${username:+--username $username} \
257 ${password:+--password $password} \
258 ${autoconnect:+--autoconnect})
260 # pdh_4 is a numeric value on success
261 if ! [ "$pdh_4" -eq "$pdh_4" ] 2> /dev
/null
; then
262 echo "Unable to connect IPv4"
263 uqmi
-s -d "$device" --set-client-id wds
,"$cid_4" --release-client-id wds
> /dev
/null
2>&1
264 proto_notify_error
"$interface" CALL_FAILED
268 # Check data connection state
269 connstat
=$
(uqmi
-s -d "$device" --get-data-status)
270 [ "$connstat" == '"connected"' ] ||
{
272 uqmi
-s -d "$device" --set-client-id wds
,"$cid_4" --release-client-id wds
> /dev
/null
2>&1
273 proto_notify_error
"$interface" CALL_FAILED
278 [ "$pdptype" = "ipv6" -o "$pdptype" = "ipv4v6" ] && {
279 cid_6
=$
(uqmi
-s -d "$device" --get-client-id wds
)
280 if ! [ "$cid_6" -eq "$cid_6" ] 2> /dev
/null
; then
281 echo "Unable to obtain client ID"
282 proto_notify_error
"$interface" NO_CID
286 uqmi
-s -d "$device" --set-client-id wds
,"$cid_6" --set-ip-family ipv6
> /dev
/null
2>&1
288 pdh_6
=$
(uqmi
-s -d "$device" --set-client-id wds
,"$cid_6" \
291 ${profile:+--profile $profile} \
292 ${auth:+--auth-type $auth} \
293 ${username:+--username $username} \
294 ${password:+--password $password} \
295 ${autoconnect:+--autoconnect})
297 # pdh_6 is a numeric value on success
298 if ! [ "$pdh_6" -eq "$pdh_6" ] 2> /dev
/null
; then
299 echo "Unable to connect IPv6"
300 uqmi
-s -d "$device" --set-client-id wds
,"$cid_6" --release-client-id wds
> /dev
/null
2>&1
301 proto_notify_error
"$interface" CALL_FAILED
305 # Check data connection state
306 connstat
=$
(uqmi
-s -d "$device" --get-data-status)
307 [ "$connstat" == '"connected"' ] ||
{
309 uqmi
-s -d "$device" --set-client-id wds
,"$cid_6" --release-client-id wds
> /dev
/null
2>&1
310 proto_notify_error
"$interface" CALL_FAILED
315 echo "Setting up $ifname"
316 proto_init_update
"$ifname" 1
320 json_add_string
"cid_4" "$cid_4"
321 json_add_string
"pdh_4" "$pdh_4"
324 json_add_string
"cid_6" "$cid_6"
325 json_add_string
"pdh_6" "$pdh_6"
328 proto_send_update
"$interface"
330 local zone
="$(fw3 -q network "$interface" 2>/dev/null)"
333 if [ -z "$dhcpv6" -o "$dhcpv6" = 0 ]; then
334 json_load
"$(uqmi -s -d $device --set-client-id wds,$cid_6 --get-current-settings)"
337 json_get_var gateway_6 gateway
338 json_get_var dns1_6 dns1
339 json_get_var dns2_6 dns2
340 json_get_var ip_prefix_length ip-prefix-length
342 proto_init_update
"$ifname" 1
344 proto_add_ipv6_address
"$ip_6" "128"
345 proto_add_ipv6_prefix
"${ip_6}/${ip_prefix_length}"
346 proto_add_ipv6_route
"$gateway_6" "128"
347 [ "$defaultroute" = 0 ] || proto_add_ipv6_route
"::0" 0 "$gateway_6" "" "" "${ip_6}/${ip_prefix_length}"
348 [ "$peerdns" = 0 ] ||
{
349 proto_add_dns_server
"$dns1_6"
350 proto_add_dns_server
"$dns2_6"
354 json_add_string zone
"$zone"
357 proto_send_update
"$interface"
360 json_add_string name
"${interface}_6"
361 json_add_string ifname
"@$interface"
362 json_add_string proto
"dhcpv6"
363 [ -n "$ip6table" ] && json_add_string ip6table
"$ip6table"
364 proto_add_dynamic_defaults
365 # RFC 7278: Extend an IPv6 /64 Prefix to LAN
366 json_add_string extendprefix
1
367 [ -n "$zone" ] && json_add_string zone
"$zone"
369 ubus call network add_dynamic
"$(json_dump)"
374 if [ "$dhcp" = 0 ]; then
375 json_load
"$(uqmi -s -d $device --set-client-id wds,$cid_4 --get-current-settings)"
378 json_get_var gateway_4 gateway
379 json_get_var dns1_4 dns1
380 json_get_var dns2_4 dns2
381 json_get_var subnet_4 subnet
383 proto_init_update
"$ifname" 1
385 proto_add_ipv4_address
"$ip_4" "$subnet_4"
386 proto_add_ipv4_route
"$gateway_4" "128"
387 [ "$defaultroute" = 0 ] || proto_add_ipv4_route
"0.0.0.0" 0 "$gateway_4"
388 [ "$peerdns" = 0 ] ||
{
389 proto_add_dns_server
"$dns1_4"
390 proto_add_dns_server
"$dns2_4"
394 json_add_string zone
"$zone"
397 proto_send_update
"$interface"
400 json_add_string name
"${interface}_4"
401 json_add_string ifname
"@$interface"
402 json_add_string proto
"dhcp"
403 [ -n "$ip4table" ] && json_add_string ip4table
"$ip4table"
404 proto_add_dynamic_defaults
405 [ -n "$zone" ] && json_add_string zone
"$zone"
407 ubus call network add_dynamic
"$(json_dump)"
416 [ -n "$cid" ] ||
return
418 uqmi
-s -d "$device" --set-client-id wds
,"$cid" \
419 --stop-network 0xffffffff \
420 --autoconnect > /dev
/null
2>&1
423 uqmi
-s -d "$device" --set-client-id wds
,"$cid" \
424 --stop-network "$pdh" > /dev
/null
2>&1
427 uqmi
-s -d "$device" --set-client-id wds
,"$cid" \
428 --release-client-id wds
> /dev
/null
2>&1
431 proto_qmi_teardown
() {
434 local device cid_4 pdh_4 cid_6 pdh_6
437 [ -n "$ctl_device" ] && device
=$ctl_device
439 echo "Stopping network $interface"
441 json_load
"$(ubus call network.interface.$interface status)"
443 json_get_vars cid_4 pdh_4 cid_6 pdh_6
445 qmi_wds_stop
"$cid_4" "$pdh_4"
446 qmi_wds_stop
"$cid_6" "$pdh_6"
448 proto_init_update
"*" 0
449 proto_send_update
"$interface"
452 [ -n "$INCLUDE_ONLY" ] ||
{