3 [ -n "$INCLUDE_ONLY" ] ||
{
9 proto_qmi_init_config
() {
12 proto_config_add_string
"device:device"
13 proto_config_add_string apn
14 proto_config_add_string auth
15 proto_config_add_string username
16 proto_config_add_string password
17 proto_config_add_string pincode
18 proto_config_add_int delay
19 proto_config_add_string modes
20 proto_config_add_string pdptype
21 proto_config_add_int profile
22 proto_config_add_boolean dhcpv6
23 proto_config_add_boolean autoconnect
24 proto_config_add_int plmn
25 proto_config_add_int timeout
26 proto_config_add_defaults
31 local dataformat connstat
32 local device apn auth username password pincode delay modes pdptype profile dhcpv6 autoconnect plmn timeout
$PROTO_DEFAULT_OPTIONS
33 local ip4table ip6table
34 local cid_4 pdh_4 cid_6 pdh_6
35 local ip_6 ip_prefix_length gateway_6 dns1_6 dns2_6
36 json_get_vars device apn auth username password pincode delay modes pdptype profile dhcpv6 autoconnect plmn ip4table ip6table timeout
$PROTO_DEFAULT_OPTIONS
38 [ "$timeout" = "" ] && timeout
="10"
40 [ "$metric" = "" ] && metric
="0"
42 [ -n "$ctl_device" ] && device
=$ctl_device
45 echo "No control device specified"
46 proto_notify_error
"$interface" NO_DEVICE
47 proto_set_available
"$interface" 0
51 [ -n "$delay" ] && sleep "$delay"
53 device
="$(readlink -f $device)"
55 echo "The specified control device does not exist"
56 proto_notify_error
"$interface" NO_DEVICE
57 proto_set_available
"$interface" 0
61 devname
="$(basename "$device")"
62 devpath
="$(readlink -f /sys/class/usbmisc/$devname/device/)"
63 ifname
="$( ls "$devpath"/net )"
65 echo "The interface could not be found."
66 proto_notify_error
"$interface" NO_IFACE
67 proto_set_available
"$interface" 0
71 while uqmi
-s -d "$device" --get-pin-status |
grep '"UIM uninitialized"' > /dev
/null
; do
72 [ -e "$device" ] ||
return 1
73 if [ "$uninitialized_timeout" -lt "$timeout" ]; then
74 let uninitialized_timeout
++
77 echo "SIM not initialized"
78 proto_notify_error
"$interface" SIM_NOT_INITIALIZED
79 proto_block_restart
"$interface"
84 [ -n "$pincode" ] && {
85 uqmi
-s -d "$device" --verify-pin1 "$pincode" > /dev
/null || uqmi
-s -d "$device" --uim-verify-pin1 "$pincode" > /dev
/null ||
{
86 echo "Unable to verify PIN"
87 proto_notify_error
"$interface" PIN_FAILED
88 proto_block_restart
"$interface"
95 if [ "$plmn" = 0 ]; then
98 echo "Setting PLMN to auto"
102 echo "Setting PLMN to $plmn"
104 uqmi
-s -d "$device" --set-plmn --mcc "$mcc" --mnc "$mnc" > /dev
/null
2>&1 ||
{
105 echo "Unable to set PLMN"
106 proto_notify_error
"$interface" PLMN_FAILED
107 proto_block_restart
"$interface"
112 # Cleanup current state if any
113 uqmi
-s -d "$device" --stop-network 0xffffffff --autoconnect > /dev
/null
2>&1
116 uqmi
-s -d "$device" --set-data-format 802.3 > /dev
/null
2>&1
117 uqmi
-s -d "$device" --wda-set-data-format 802.3 > /dev
/null
2>&1
118 dataformat
="$(uqmi -s -d "$device" --wda-get-data-format)"
120 if [ "$dataformat" = '"raw-ip"' ]; then
122 [ -f /sys
/class
/net
/$ifname/qmi
/raw_ip
] ||
{
123 echo "Device only supports raw-ip mode but is missing this required driver attribute: /sys/class/net/$ifname/qmi/raw_ip"
127 echo "Device does not support 802.3 mode. Informing driver of raw-ip only for $ifname .."
128 echo "Y" > /sys
/class
/net
/$ifname/qmi
/raw_ip
131 uqmi
-s -d "$device" --sync > /dev
/null
2>&1
133 echo "Waiting for network registration"
134 local registration_timeout
=0
135 while uqmi
-s -d "$device" --get-serving-system |
grep '"searching"' > /dev
/null
; do
136 [ -e "$device" ] ||
return 1
137 if [ "$registration_timeout" -lt "$timeout" ]; then
138 let registration_timeout
++
141 echo "Network registration failed"
142 proto_notify_error
"$interface" NETWORK_REGISTRATION_FAILED
143 proto_block_restart
"$interface"
148 [ -n "$modes" ] && uqmi
-s -d "$device" --set-network-modes "$modes" > /dev
/null
2>&1
150 echo "Starting network $interface"
152 pdptype
=$
(echo "$pdptype" |
awk '{print tolower($0)}')
153 [ "$pdptype" = "ip" -o "$pdptype" = "ipv6" -o "$pdptype" = "ipv4v6" ] || pdptype
="ip"
155 if [ "$pdptype" = "ip" ]; then
156 [ -z "$autoconnect" ] && autoconnect
=1
157 [ "$autoconnect" = 0 ] && autoconnect
=""
159 [ "$autoconnect" = 1 ] || autoconnect
=""
162 [ "$pdptype" = "ip" -o "$pdptype" = "ipv4v6" ] && {
163 cid_4
=$
(uqmi
-s -d "$device" --get-client-id wds
)
164 if ! [ "$cid_4" -eq "$cid_4" ] 2> /dev
/null
; then
165 echo "Unable to obtain client ID"
166 proto_notify_error
"$interface" NO_CID
170 uqmi
-s -d "$device" --set-client-id wds
,"$cid_4" --set-ip-family ipv4
> /dev
/null
2>&1
172 pdh_4
=$
(uqmi
-s -d "$device" --set-client-id wds
,"$cid_4" \
175 ${profile:+--profile $profile} \
176 ${auth:+--auth-type $auth} \
177 ${username:+--username $username} \
178 ${password:+--password $password} \
179 ${autoconnect:+--autoconnect})
181 # pdh_4 is a numeric value on success
182 if ! [ "$pdh_4" -eq "$pdh_4" ] 2> /dev
/null
; then
183 echo "Unable to connect IPv4"
184 uqmi
-s -d "$device" --set-client-id wds
,"$cid_4" --release-client-id wds
> /dev
/null
2>&1
185 proto_notify_error
"$interface" CALL_FAILED
189 # Check data connection state
190 connstat
=$
(uqmi
-s -d "$device" --get-data-status)
191 [ "$connstat" == '"connected"' ] ||
{
193 uqmi
-s -d "$device" --set-client-id wds
,"$cid_4" --release-client-id wds
> /dev
/null
2>&1
194 proto_notify_error
"$interface" CALL_FAILED
199 [ "$pdptype" = "ipv6" -o "$pdptype" = "ipv4v6" ] && {
200 cid_6
=$
(uqmi
-s -d "$device" --get-client-id wds
)
201 if ! [ "$cid_6" -eq "$cid_6" ] 2> /dev
/null
; then
202 echo "Unable to obtain client ID"
203 proto_notify_error
"$interface" NO_CID
207 uqmi
-s -d "$device" --set-client-id wds
,"$cid_6" --set-ip-family ipv6
> /dev
/null
2>&1
209 pdh_6
=$
(uqmi
-s -d "$device" --set-client-id wds
,"$cid_6" \
212 ${profile:+--profile $profile} \
213 ${auth:+--auth-type $auth} \
214 ${username:+--username $username} \
215 ${password:+--password $password} \
216 ${autoconnect:+--autoconnect})
218 # pdh_6 is a numeric value on success
219 if ! [ "$pdh_6" -eq "$pdh_6" ] 2> /dev
/null
; then
220 echo "Unable to connect IPv6"
221 uqmi
-s -d "$device" --set-client-id wds
,"$cid_6" --release-client-id wds
> /dev
/null
2>&1
222 proto_notify_error
"$interface" CALL_FAILED
226 # Check data connection state
227 connstat
=$
(uqmi
-s -d "$device" --get-data-status)
228 [ "$connstat" == '"connected"' ] ||
{
230 uqmi
-s -d "$device" --set-client-id wds
,"$cid_6" --release-client-id wds
> /dev
/null
2>&1
231 proto_notify_error
"$interface" CALL_FAILED
236 echo "Setting up $ifname"
237 proto_init_update
"$ifname" 1
241 json_add_string
"cid_4" "$cid_4"
242 json_add_string
"pdh_4" "$pdh_4"
245 json_add_string
"cid_6" "$cid_6"
246 json_add_string
"pdh_6" "$pdh_6"
249 proto_send_update
"$interface"
251 if [ -z "$dhcpv6" -o "$dhcpv6" = 0 ]; then
252 json_load
"$(uqmi -s -d $device --set-client-id wds,$cid_6 --get-current-settings)"
255 json_get_var gateway_6 gateway
256 json_get_var dns1_6 dns1
257 json_get_var dns2_6 dns2
258 json_get_var ip_prefix_length ip-prefix-length
260 proto_init_update
"$ifname" 1
262 proto_add_ipv6_address
"$ip_6" "128"
263 proto_add_ipv6_prefix
"${ip_6}/${ip_prefix_length}"
264 proto_add_ipv6_route
"$gateway_6" "128"
265 [ "$defaultroute" = 0 ] || proto_add_ipv6_route
"::0" 0 "$gateway_6" "" "" "${ip_6}/${ip_prefix_length}"
266 [ "$peerdns" = 0 ] ||
{
267 proto_add_dns_server
"$dns1_6"
268 proto_add_dns_server
"$dns2_6"
270 proto_send_update
"$interface"
273 json_add_string name
"${interface}_6"
274 json_add_string ifname
"@$interface"
275 json_add_string proto
"dhcpv6"
276 [ -n "$ip6table" ] && json_add_string ip6table
"$ip6table"
277 proto_add_dynamic_defaults
278 # RFC 7278: Extend an IPv6 /64 Prefix to LAN
279 json_add_string extendprefix
1
281 ubus call network add_dynamic
"$(json_dump)"
287 json_add_string name
"${interface}_4"
288 json_add_string ifname
"@$interface"
289 json_add_string proto
"dhcp"
290 [ -n "$ip4table" ] && json_add_string ip4table
"$ip4table"
291 proto_add_dynamic_defaults
293 ubus call network add_dynamic
"$(json_dump)"
301 [ -n "$cid" ] ||
return
303 uqmi
-s -d "$device" --set-client-id wds
,"$cid" \
304 --stop-network 0xffffffff \
305 --autoconnect > /dev
/null
2>&1
308 uqmi
-s -d "$device" --set-client-id wds
,"$cid" \
309 --stop-network "$pdh" > /dev
/null
2>&1
312 uqmi
-s -d "$device" --set-client-id wds
,"$cid" \
313 --release-client-id wds
> /dev
/null
2>&1
316 proto_qmi_teardown
() {
319 local device cid_4 pdh_4 cid_6 pdh_6
322 [ -n "$ctl_device" ] && device
=$ctl_device
324 echo "Stopping network $interface"
326 json_load
"$(ubus call network.interface.$interface status)"
328 json_get_vars cid_4 pdh_4 cid_6 pdh_6
330 qmi_wds_stop
"$cid_4" "$pdh_4"
331 qmi_wds_stop
"$cid_6" "$pdh_6"
333 proto_init_update
"*" 0
334 proto_send_update
"$interface"
337 [ -n "$INCLUDE_ONLY" ] ||
{