3 [ -n "$INCLUDE_ONLY" ] ||
{
9 proto_qmi_init_config
() {
12 proto_config_add_string
"device:device"
13 proto_config_add_string apn
14 proto_config_add_string auth
15 proto_config_add_string username
16 proto_config_add_string password
17 proto_config_add_string pincode
18 proto_config_add_int delay
19 proto_config_add_string modes
20 proto_config_add_string pdptype
21 proto_config_add_int profile
22 proto_config_add_boolean dhcpv6
23 proto_config_add_boolean autoconnect
24 proto_config_add_int plmn
25 proto_config_add_int timeout
26 proto_config_add_defaults
31 local dataformat connstat
32 local device apn auth username password pincode delay modes pdptype profile dhcpv6 autoconnect plmn timeout
$PROTO_DEFAULT_OPTIONS
33 local ip4table ip6table
34 local cid_4 pdh_4 cid_6 pdh_6
35 local ip_6 ip_prefix_length gateway_6 dns1_6 dns2_6
36 json_get_vars device apn auth username password pincode delay modes pdptype profile dhcpv6 autoconnect plmn ip4table ip6table timeout
$PROTO_DEFAULT_OPTIONS
38 [ "$timeout" = "" ] && timeout
="10"
40 [ "$metric" = "" ] && metric
="0"
42 [ -n "$ctl_device" ] && device
=$ctl_device
45 echo "No control device specified"
46 proto_notify_error
"$interface" NO_DEVICE
47 proto_set_available
"$interface" 0
51 [ -n "$delay" ] && sleep "$delay"
53 device
="$(readlink -f $device)"
55 echo "The specified control device does not exist"
56 proto_notify_error
"$interface" NO_DEVICE
57 proto_set_available
"$interface" 0
61 devname
="$(basename "$device")"
62 devpath
="$(readlink -f /sys/class/usbmisc/$devname/device/)"
63 ifname
="$( ls "$devpath"/net )"
65 echo "The interface could not be found."
66 proto_notify_error
"$interface" NO_IFACE
67 proto_set_available
"$interface" 0
71 while uqmi
-s -d "$device" --get-pin-status |
grep '"UIM uninitialized"' > /dev
/null
; do
72 [ -e "$device" ] ||
return 1
73 if [ "$uninitialized_timeout" -lt "$timeout" ]; then
74 let uninitialized_timeout
++
77 echo "SIM not initialized"
78 proto_notify_error
"$interface" SIM_NOT_INITIALIZED
79 proto_block_restart
"$interface"
84 if uqmi
-s -d "$device" --get-pin-status |
grep '"Not supported"' > /dev
/null
; then
85 [ -n "$pincode" ] && {
86 uqmi
-s -d "$device" --verify-pin1 "$pincode" > /dev
/null || uqmi
-s -d "$device" --uim-verify-pin1 "$pincode" > /dev
/null ||
{
87 echo "Unable to verify PIN"
88 proto_notify_error
"$interface" PIN_FAILED
89 proto_block_restart
"$interface"
94 .
/usr
/share
/libubox
/jshn.sh
95 json_load
"$(uqmi -s -d "$device" --get-pin-status)"
96 json_get_var pin1_status pin1_status
97 json_get_var pin1_verify_tries pin1_verify_tries
99 case "$pin1_status" in
101 echo "PIN verification is disabled"
104 echo "SIM locked PUK required"
105 proto_notify_error
"$interface" PUK_NEEDED
106 proto_block_restart
"$interface"
110 [ "$pin1_verify_tries" -lt "3" ] && {
111 echo "PIN verify count value is $pin1_verify_tries this is below the limit of 3"
112 proto_notify_error
"$interface" PIN_TRIES_BELOW_LIMIT
113 proto_block_restart
"$interface"
116 if [ -n "$pincode" ]; then
117 uqmi
-s -d "$device" --verify-pin1 "$pincode" > /dev
/null
2>&1 || uqmi
-s -d "$device" --uim-verify-pin1 "$pincode" > /dev
/null
2>&1 ||
{
118 echo "Unable to verify PIN"
119 proto_notify_error
"$interface" PIN_FAILED
120 proto_block_restart
"$interface"
124 echo "PIN not specified but required"
125 proto_notify_error
"$interface" PIN_NOT_SPECIFIED
126 proto_block_restart
"$interface"
131 echo "PIN already verified"
134 echo "PIN status failed ($pin1_status)"
135 proto_notify_error
"$interface" PIN_STATUS_FAILED
136 proto_block_restart
"$interface"
144 if [ "$plmn" = 0 ]; then
147 echo "Setting PLMN to auto"
151 echo "Setting PLMN to $plmn"
153 uqmi
-s -d "$device" --set-plmn --mcc "$mcc" --mnc "$mnc" > /dev
/null
2>&1 ||
{
154 echo "Unable to set PLMN"
155 proto_notify_error
"$interface" PLMN_FAILED
156 proto_block_restart
"$interface"
161 # Cleanup current state if any
162 uqmi
-s -d "$device" --stop-network 0xffffffff --autoconnect > /dev
/null
2>&1
165 uqmi
-s -d "$device" --set-data-format 802.3 > /dev
/null
2>&1
166 uqmi
-s -d "$device" --wda-set-data-format 802.3 > /dev
/null
2>&1
167 dataformat
="$(uqmi -s -d "$device" --wda-get-data-format)"
169 if [ "$dataformat" = '"raw-ip"' ]; then
171 [ -f /sys
/class
/net
/$ifname/qmi
/raw_ip
] ||
{
172 echo "Device only supports raw-ip mode but is missing this required driver attribute: /sys/class/net/$ifname/qmi/raw_ip"
176 echo "Device does not support 802.3 mode. Informing driver of raw-ip only for $ifname .."
177 echo "Y" > /sys
/class
/net
/$ifname/qmi
/raw_ip
180 uqmi
-s -d "$device" --sync > /dev
/null
2>&1
182 echo "Waiting for network registration"
183 local registration_timeout
=0
184 while uqmi
-s -d "$device" --get-serving-system |
grep '"searching"' > /dev
/null
; do
185 [ -e "$device" ] ||
return 1
186 if [ "$registration_timeout" -lt "$timeout" ]; then
187 let registration_timeout
++
190 echo "Network registration failed"
191 proto_notify_error
"$interface" NETWORK_REGISTRATION_FAILED
192 proto_block_restart
"$interface"
197 [ -n "$modes" ] && uqmi
-s -d "$device" --set-network-modes "$modes" > /dev
/null
2>&1
199 echo "Starting network $interface"
201 pdptype
=$
(echo "$pdptype" |
awk '{print tolower($0)}')
202 [ "$pdptype" = "ip" -o "$pdptype" = "ipv6" -o "$pdptype" = "ipv4v6" ] || pdptype
="ip"
204 if [ "$pdptype" = "ip" ]; then
205 [ -z "$autoconnect" ] && autoconnect
=1
206 [ "$autoconnect" = 0 ] && autoconnect
=""
208 [ "$autoconnect" = 1 ] || autoconnect
=""
211 [ "$pdptype" = "ip" -o "$pdptype" = "ipv4v6" ] && {
212 cid_4
=$
(uqmi
-s -d "$device" --get-client-id wds
)
213 if ! [ "$cid_4" -eq "$cid_4" ] 2> /dev
/null
; then
214 echo "Unable to obtain client ID"
215 proto_notify_error
"$interface" NO_CID
219 uqmi
-s -d "$device" --set-client-id wds
,"$cid_4" --set-ip-family ipv4
> /dev
/null
2>&1
221 pdh_4
=$
(uqmi
-s -d "$device" --set-client-id wds
,"$cid_4" \
224 ${profile:+--profile $profile} \
225 ${auth:+--auth-type $auth} \
226 ${username:+--username $username} \
227 ${password:+--password $password} \
228 ${autoconnect:+--autoconnect})
230 # pdh_4 is a numeric value on success
231 if ! [ "$pdh_4" -eq "$pdh_4" ] 2> /dev
/null
; then
232 echo "Unable to connect IPv4"
233 uqmi
-s -d "$device" --set-client-id wds
,"$cid_4" --release-client-id wds
> /dev
/null
2>&1
234 proto_notify_error
"$interface" CALL_FAILED
238 # Check data connection state
239 connstat
=$
(uqmi
-s -d "$device" --get-data-status)
240 [ "$connstat" == '"connected"' ] ||
{
242 uqmi
-s -d "$device" --set-client-id wds
,"$cid_4" --release-client-id wds
> /dev
/null
2>&1
243 proto_notify_error
"$interface" CALL_FAILED
248 [ "$pdptype" = "ipv6" -o "$pdptype" = "ipv4v6" ] && {
249 cid_6
=$
(uqmi
-s -d "$device" --get-client-id wds
)
250 if ! [ "$cid_6" -eq "$cid_6" ] 2> /dev
/null
; then
251 echo "Unable to obtain client ID"
252 proto_notify_error
"$interface" NO_CID
256 uqmi
-s -d "$device" --set-client-id wds
,"$cid_6" --set-ip-family ipv6
> /dev
/null
2>&1
258 pdh_6
=$
(uqmi
-s -d "$device" --set-client-id wds
,"$cid_6" \
261 ${profile:+--profile $profile} \
262 ${auth:+--auth-type $auth} \
263 ${username:+--username $username} \
264 ${password:+--password $password} \
265 ${autoconnect:+--autoconnect})
267 # pdh_6 is a numeric value on success
268 if ! [ "$pdh_6" -eq "$pdh_6" ] 2> /dev
/null
; then
269 echo "Unable to connect IPv6"
270 uqmi
-s -d "$device" --set-client-id wds
,"$cid_6" --release-client-id wds
> /dev
/null
2>&1
271 proto_notify_error
"$interface" CALL_FAILED
275 # Check data connection state
276 connstat
=$
(uqmi
-s -d "$device" --get-data-status)
277 [ "$connstat" == '"connected"' ] ||
{
279 uqmi
-s -d "$device" --set-client-id wds
,"$cid_6" --release-client-id wds
> /dev
/null
2>&1
280 proto_notify_error
"$interface" CALL_FAILED
285 echo "Setting up $ifname"
286 proto_init_update
"$ifname" 1
290 json_add_string
"cid_4" "$cid_4"
291 json_add_string
"pdh_4" "$pdh_4"
294 json_add_string
"cid_6" "$cid_6"
295 json_add_string
"pdh_6" "$pdh_6"
298 proto_send_update
"$interface"
300 if [ -z "$dhcpv6" -o "$dhcpv6" = 0 ]; then
301 json_load
"$(uqmi -s -d $device --set-client-id wds,$cid_6 --get-current-settings)"
304 json_get_var gateway_6 gateway
305 json_get_var dns1_6 dns1
306 json_get_var dns2_6 dns2
307 json_get_var ip_prefix_length ip-prefix-length
309 proto_init_update
"$ifname" 1
311 proto_add_ipv6_address
"$ip_6" "128"
312 proto_add_ipv6_prefix
"${ip_6}/${ip_prefix_length}"
313 proto_add_ipv6_route
"$gateway_6" "128"
314 [ "$defaultroute" = 0 ] || proto_add_ipv6_route
"::0" 0 "$gateway_6" "" "" "${ip_6}/${ip_prefix_length}"
315 [ "$peerdns" = 0 ] ||
{
316 proto_add_dns_server
"$dns1_6"
317 proto_add_dns_server
"$dns2_6"
319 proto_send_update
"$interface"
322 json_add_string name
"${interface}_6"
323 json_add_string ifname
"@$interface"
324 json_add_string proto
"dhcpv6"
325 [ -n "$ip6table" ] && json_add_string ip6table
"$ip6table"
326 proto_add_dynamic_defaults
327 # RFC 7278: Extend an IPv6 /64 Prefix to LAN
328 json_add_string extendprefix
1
330 ubus call network add_dynamic
"$(json_dump)"
336 json_add_string name
"${interface}_4"
337 json_add_string ifname
"@$interface"
338 json_add_string proto
"dhcp"
339 [ -n "$ip4table" ] && json_add_string ip4table
"$ip4table"
340 proto_add_dynamic_defaults
342 ubus call network add_dynamic
"$(json_dump)"
350 [ -n "$cid" ] ||
return
352 uqmi
-s -d "$device" --set-client-id wds
,"$cid" \
353 --stop-network 0xffffffff \
354 --autoconnect > /dev
/null
2>&1
357 uqmi
-s -d "$device" --set-client-id wds
,"$cid" \
358 --stop-network "$pdh" > /dev
/null
2>&1
361 uqmi
-s -d "$device" --set-client-id wds
,"$cid" \
362 --release-client-id wds
> /dev
/null
2>&1
365 proto_qmi_teardown
() {
368 local device cid_4 pdh_4 cid_6 pdh_6
371 [ -n "$ctl_device" ] && device
=$ctl_device
373 echo "Stopping network $interface"
375 json_load
"$(ubus call network.interface.$interface status)"
377 json_get_vars cid_4 pdh_4 cid_6 pdh_6
379 qmi_wds_stop
"$cid_4" "$pdh_4"
380 qmi_wds_stop
"$cid_6" "$pdh_6"
382 proto_init_update
"*" 0
383 proto_send_update
"$interface"
386 [ -n "$INCLUDE_ONLY" ] ||
{