7 proto_qmi_init_config
() {
10 proto_config_add_string
"device:device"
11 proto_config_add_string apn
12 proto_config_add_string auth
13 proto_config_add_string username
14 proto_config_add_string password
15 proto_config_add_string pincode
16 proto_config_add_string delay
17 proto_config_add_string modes
21 # disable previous autoconnect state using the global handle
22 # do not reuse previous wds client id to prevent hangs caused by stale data
23 uqmi
-s -d "$device" \
24 --stop-network 0xffffffff \
25 --autoconnect > /dev
/null
31 local device apn auth username password pincode delay modes cid pdh
32 json_get_vars device apn auth username password pincode delay modes
35 echo "No control device specified"
36 proto_notify_error
"$interface" NO_DEVICE
37 proto_block_restart
"$interface"
41 echo "The specified control device does not exist"
42 proto_notify_error
"$interface" NO_DEVICE
43 proto_block_restart
"$interface"
47 devname
="$(basename "$device")"
48 devpath
="$(readlink -f /sys/class/usbmisc/$devname/device/)"
49 ifname
="$( ls "$devpath"/net )"
51 echo "The interface could not be found."
52 proto_notify_error
"$interface" NO_IFACE
53 proto_block_restart
"$interface"
57 [ -n "$delay" ] && sleep "$delay"
59 while uqmi
-s -d "$device" --get-pin-status |
grep '"UIM uninitialized"' > /dev
/null
; do
63 [ -n "$pincode" ] && {
64 uqmi
-s -d "$device" --verify-pin1 "$pincode" ||
{
65 echo "Unable to verify PIN"
66 proto_notify_error
"$interface" PIN_FAILED
67 proto_block_restart
"$interface"
73 echo "No APN specified"
74 proto_notify_error
"$interface" NO_APN
75 proto_block_restart
"$interface"
81 echo "Waiting for network registration"
82 while uqmi
-s -d "$device" --get-serving-system |
grep '"searching"' > /dev
/null
; do
86 [ -n "$modes" ] && uqmi
-s -d "$device" --set-network-modes "$modes"
88 echo "Starting network $apn"
89 cid
=`uqmi -s -d "$device" --get-client-id wds`
91 echo "Unable to obtain client ID"
92 proto_notify_error
"$interface" NO_CID
93 proto_block_restart
"$interface"
97 uqmi
-s -d "$device" --set-client-id wds
,"$cid" \
98 --start-network "$apn" \
99 ${auth:+--auth-type $auth} \
100 ${username:+--username $username} \
101 ${password:+--password $password} \
102 --autoconnect > /dev
/null
104 if ! uqmi
-s -d "$device" --get-data-status |
grep '"connected"' > /dev
/null
; then
105 echo "Connection lost"
106 proto_notify_error
"$interface" NOT_CONNECTED
110 echo "Connected, starting DHCP"
111 proto_init_update
"$ifname" 1
112 proto_send_update
"$interface"
115 json_add_string name
"${interface}_dhcp"
116 json_add_string ifname
"@$interface"
117 json_add_string proto
"dhcp"
119 ubus call network add_dynamic
"$(json_dump)"
122 json_add_string name
"${interface}_dhcpv6"
123 json_add_string ifname
"@$interface"
124 json_add_string proto
"dhcpv6"
126 ubus call network add_dynamic
"$(json_dump)"
129 proto_qmi_teardown
() {
134 local cid
=$
(uci_get_state network
$interface cid
)
136 echo "Stopping network"
139 uqmi
-s -d "$device" --set-client-id wds
,"$cid" --release-client-id wds
140 uci_revert_state network
$interface cid
143 proto_init_update
"*" 0
144 proto_send_update
"$interface"