[openwrt/staging/jow.git] / package / utils / busybox / config / networking / Config.in

# DO NOT EDIT. This file is generated from Config.src
#
# For a description of the syntax of this configuration file,
# see docs/Kconfig-language.txt.
#

menu "Networking Utilities"

config BUSYBOX_CONFIG_FEATURE_IPV6
        bool "Enable IPv6 support"
        default BUSYBOX_DEFAULT_FEATURE_IPV6
        help
        Enable IPv6 support in busybox.
        This adds IPv6 support in the networking applets.

config BUSYBOX_CONFIG_FEATURE_UNIX_LOCAL
        bool "Enable Unix domain socket support (usually not needed)"
        default BUSYBOX_DEFAULT_FEATURE_UNIX_LOCAL
        help
        Enable Unix domain socket support in all busybox networking
        applets.  Address of the form local:/path/to/unix/socket
        will be recognized.

        This extension is almost never used in real world usage.
        You most likely want to say N.

config BUSYBOX_CONFIG_FEATURE_PREFER_IPV4_ADDRESS
        bool "Prefer IPv4 addresses from DNS queries"
        default BUSYBOX_DEFAULT_FEATURE_PREFER_IPV4_ADDRESS
        depends on BUSYBOX_CONFIG_FEATURE_IPV6
        help
        Use IPv4 address of network host if it has one.

        If this option is off, the first returned address will be used.
        This may cause problems when your DNS server is IPv6-capable and
        is returning IPv6 host addresses too. If IPv6 address
        precedes IPv4 one in DNS reply, busybox network applets
        (e.g. wget) will use IPv6 address. On an IPv6-incapable host
        or network applets will fail to connect to the host
        using IPv6 address.

config BUSYBOX_CONFIG_VERBOSE_RESOLUTION_ERRORS
        bool "Verbose resolution errors"
        default BUSYBOX_DEFAULT_VERBOSE_RESOLUTION_ERRORS
        help
        Enable if you are not satisfied with simplistic
        "can't resolve 'hostname.com'" and want to know more.
        This may increase size of your executable a bit.

config BUSYBOX_CONFIG_FEATURE_TLS_SHA1
        bool "In TLS code, support ciphers which use deprecated SHA1"
        depends on BUSYBOX_CONFIG_TLS
        default BUSYBOX_DEFAULT_FEATURE_TLS_SHA1
        help
        Selecting this option increases interoperability with very old
        servers, but slightly increases code size.

        Most TLS servers support SHA256 today (2018), since SHA1 is
        considered possibly insecure (although not yet definitely broken).

config BUSYBOX_CONFIG_ARP
        bool "arp (10 kb)"
        default BUSYBOX_DEFAULT_ARP
        help
        Manipulate the system ARP cache.
config BUSYBOX_CONFIG_ARPING
        bool "arping (9 kb)"
        default BUSYBOX_DEFAULT_ARPING
        help
        Ping hosts by ARP packets.
config BUSYBOX_CONFIG_BRCTL
        bool "brctl (4.7 kb)"
        default BUSYBOX_DEFAULT_BRCTL
        help
        Manage ethernet bridges.
        Supports addbr/delbr and addif/delif.

config BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY
        bool "Fancy options"
        default BUSYBOX_DEFAULT_FEATURE_BRCTL_FANCY
        depends on BUSYBOX_CONFIG_BRCTL
        help
        Add support for extended option like:
                setageing, setfd, sethello, setmaxage,
                setpathcost, setportprio, setbridgeprio,
                stp
        This adds about 600 bytes.

config BUSYBOX_CONFIG_FEATURE_BRCTL_SHOW
        bool "Support show"
        default BUSYBOX_DEFAULT_FEATURE_BRCTL_SHOW
        depends on BUSYBOX_CONFIG_BRCTL && BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY
        help
        Add support for option which prints the current config:
                show
config BUSYBOX_CONFIG_DNSD
        bool "dnsd (9.8 kb)"
        default BUSYBOX_DEFAULT_DNSD
        help
        Small and static DNS server daemon.
config BUSYBOX_CONFIG_ETHER_WAKE
        bool "ether-wake (4.9 kb)"
        default BUSYBOX_DEFAULT_ETHER_WAKE
        help
        Send a magic packet to wake up sleeping machines.
config BUSYBOX_CONFIG_FTPD
        bool "ftpd (30 kb)"
        default BUSYBOX_DEFAULT_FTPD
        help
        Simple FTP daemon. You have to run it via inetd.

config BUSYBOX_CONFIG_FEATURE_FTPD_WRITE
        bool "Enable -w (upload commands)"
        default BUSYBOX_DEFAULT_FEATURE_FTPD_WRITE
        depends on BUSYBOX_CONFIG_FTPD
        help
        Enable -w option. "ftpd -w" will accept upload commands
        such as STOR, STOU, APPE, DELE, MKD, RMD, rename commands.

config BUSYBOX_CONFIG_FEATURE_FTPD_ACCEPT_BROKEN_LIST
        bool "Enable workaround for RFC-violating clients"
        default BUSYBOX_DEFAULT_FEATURE_FTPD_ACCEPT_BROKEN_LIST
        depends on BUSYBOX_CONFIG_FTPD
        help
        Some ftp clients (among them KDE's Konqueror) issue illegal
        "LIST -l" requests. This option works around such problems.
        It might prevent you from listing files starting with "-" and
        it increases the code size by ~40 bytes.
        Most other ftp servers seem to behave similar to this.

config BUSYBOX_CONFIG_FEATURE_FTPD_AUTHENTICATION
        bool "Enable authentication"
        default BUSYBOX_DEFAULT_FEATURE_FTPD_AUTHENTICATION
        depends on BUSYBOX_CONFIG_FTPD
        help
        Require login, and change to logged in user's UID:GID before
        accessing any files. Option "-a USER" allows "anonymous"
        logins (treats them as if USER logged in).

        If this option is not selected, ftpd runs with the rights
        of the user it was started under, and does not require login.
        Take care to not launch it under root.
config BUSYBOX_CONFIG_FTPGET
        bool "ftpget (7.8 kb)"
        default BUSYBOX_DEFAULT_FTPGET
        help
        Retrieve a remote file via FTP.

config BUSYBOX_CONFIG_FTPPUT
        bool "ftpput (7.5 kb)"
        default BUSYBOX_DEFAULT_FTPPUT
        help
        Store a remote file via FTP.

config BUSYBOX_CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS
        bool "Enable long options in ftpget/ftpput"
        default BUSYBOX_DEFAULT_FEATURE_FTPGETPUT_LONG_OPTIONS
        depends on BUSYBOX_CONFIG_LONG_OPTS && (BUSYBOX_CONFIG_FTPGET || BUSYBOX_CONFIG_FTPPUT)
config BUSYBOX_CONFIG_HOSTNAME
        bool "hostname (5.5 kb)"
        default BUSYBOX_DEFAULT_HOSTNAME
        help
        Show or set the system's host name.

config BUSYBOX_CONFIG_DNSDOMAINNAME
        bool "dnsdomainname (3.6 kb)"
        default BUSYBOX_DEFAULT_DNSDOMAINNAME
        help
        Alias to "hostname -d".
config BUSYBOX_CONFIG_HTTPD
        bool "httpd (32 kb)"
        default BUSYBOX_DEFAULT_HTTPD
        help
        HTTP server.

config BUSYBOX_CONFIG_FEATURE_HTTPD_RANGES
        bool "Support 'Ranges:' header"
        default BUSYBOX_DEFAULT_FEATURE_HTTPD_RANGES
        depends on BUSYBOX_CONFIG_HTTPD
        help
        Makes httpd emit "Accept-Ranges: bytes" header and understand
        "Range: bytes=NNN-[MMM]" header. Allows for resuming interrupted
        downloads, seeking in multimedia players etc.

config BUSYBOX_CONFIG_FEATURE_HTTPD_SETUID
        bool "Enable -u <user> option"
        default BUSYBOX_DEFAULT_FEATURE_HTTPD_SETUID
        depends on BUSYBOX_CONFIG_HTTPD
        help
        This option allows the server to run as a specific user
        rather than defaulting to the user that starts the server.
        Use of this option requires special privileges to change to a
        different user.

config BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH
        bool "Enable HTTP authentication"
        default BUSYBOX_DEFAULT_FEATURE_HTTPD_BASIC_AUTH
        depends on BUSYBOX_CONFIG_HTTPD
        help
        Utilizes password settings from /etc/httpd.conf for basic
        authentication on a per url basis.
        Example for httpd.conf file:
        /adm:toor:PaSsWd

config BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5
        bool "Support MD5-encrypted passwords in HTTP authentication"
        default BUSYBOX_DEFAULT_FEATURE_HTTPD_AUTH_MD5
        depends on BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH
        help
        Enables encrypted passwords, and wildcard user/passwords
        in httpd.conf file.
        User '*' means 'any system user name is ok',
        password of '*' means 'use system password for this user'
        Examples:
        /adm:toor:$1$P/eKnWXS$aI1aPGxT.dJD5SzqAKWrF0
        /adm:root:*
        /wiki:*:*

config BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
        bool "Support Common Gateway Interface (CGI)"
        default BUSYBOX_DEFAULT_FEATURE_HTTPD_CGI
        depends on BUSYBOX_CONFIG_HTTPD
        help
        This option allows scripts and executables to be invoked
        when specific URLs are requested.

config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR
        bool "Support running scripts through an interpreter"
        default BUSYBOX_DEFAULT_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR
        depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
        help
        This option enables support for running scripts through an
        interpreter. Turn this on if you want PHP scripts to work
        properly. You need to supply an additional line in your
        httpd.conf file:
        *.php:/path/to/your/php

config BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV
        bool "Set REMOTE_PORT environment variable for CGI"
        default BUSYBOX_DEFAULT_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV
        depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
        help
        Use of this option can assist scripts in generating
        references that contain a unique port number.

config BUSYBOX_CONFIG_FEATURE_HTTPD_ENCODE_URL_STR
        bool "Enable -e option (useful for CGIs written as shell scripts)"
        default BUSYBOX_DEFAULT_FEATURE_HTTPD_ENCODE_URL_STR
        depends on BUSYBOX_CONFIG_HTTPD
        help
        This option allows html encoding of arbitrary strings for display
        by the browser. Output goes to stdout.
        For example, httpd -e "<Hello World>" produces
        "&#60Hello&#32World&#62".

config BUSYBOX_CONFIG_FEATURE_HTTPD_ERROR_PAGES
        bool "Support custom error pages"
        default BUSYBOX_DEFAULT_FEATURE_HTTPD_ERROR_PAGES
        depends on BUSYBOX_CONFIG_HTTPD
        help
        This option allows you to define custom error pages in
        the configuration file instead of the default HTTP status
        error pages. For instance, if you add the line:
                E404:/path/e404.html
        in the config file, the server will respond the specified
        '/path/e404.html' file instead of the terse '404 NOT FOUND'
        message.

config BUSYBOX_CONFIG_FEATURE_HTTPD_PROXY
        bool "Support reverse proxy"
        default BUSYBOX_DEFAULT_FEATURE_HTTPD_PROXY
        depends on BUSYBOX_CONFIG_HTTPD
        help
        This option allows you to define URLs that will be forwarded
        to another HTTP server. To setup add the following line to the
        configuration file
                P:/url/:http://hostname[:port]/new/path/
        Then a request to /url/myfile will be forwarded to
        http://hostname[:port]/new/path/myfile.

config BUSYBOX_CONFIG_FEATURE_HTTPD_GZIP
        bool "Support GZIP content encoding"
        default BUSYBOX_DEFAULT_FEATURE_HTTPD_GZIP
        depends on BUSYBOX_CONFIG_HTTPD
        help
        Makes httpd send files using GZIP content encoding if the
        client supports it and a pre-compressed <file>.gz exists.

config BUSYBOX_CONFIG_FEATURE_HTTPD_ETAG
        bool "Support caching via ETag header"
        default BUSYBOX_DEFAULT_FEATURE_HTTPD_ETAG
        depends on BUSYBOX_CONFIG_HTTPD
        help
        If server responds with ETag then next time client (browser)
        resend it via If-None-Match header.
        Then httpd will check if file wasn't modified and if not,
        return 304 Not Modified status code.
        The ETag value is constructed from last modification date
        in unix epoch, and size: "hex(last_mod)-hex(file_size)".
        It's not completely reliable as hash functions but fair enough.

config BUSYBOX_CONFIG_FEATURE_HTTPD_LAST_MODIFIED
        bool "Add Last-Modified header to response"
        default BUSYBOX_DEFAULT_FEATURE_HTTPD_LAST_MODIFIED
        depends on BUSYBOX_CONFIG_HTTPD
        help
        The Last-Modified header is used for cache validation.
        The client sends last seen mtime to server in If-Modified-Since.
        Both headers MUST be an RFC 1123 formatted, which is hard to parse.
        Use ETag header instead.

config BUSYBOX_CONFIG_FEATURE_HTTPD_DATE
        bool "Add Date header to response"
        default BUSYBOX_DEFAULT_FEATURE_HTTPD_DATE
        depends on BUSYBOX_CONFIG_HTTPD
        help
        RFC2616 says that server MUST add Date header to response.
        But it is almost useless and can be omitted.

config BUSYBOX_CONFIG_FEATURE_HTTPD_ACL_IP
        bool "ACL IP"
        default BUSYBOX_DEFAULT_FEATURE_HTTPD_ACL_IP
        depends on BUSYBOX_CONFIG_HTTPD
        help
        Support IP deny/allow rules
config BUSYBOX_CONFIG_IFCONFIG
        bool "ifconfig (12 kb)"
        default BUSYBOX_DEFAULT_IFCONFIG
        help
        Ifconfig is used to configure the kernel-resident network interfaces.

config BUSYBOX_CONFIG_FEATURE_IFCONFIG_STATUS
        bool "Enable status reporting output (+7k)"
        default BUSYBOX_DEFAULT_FEATURE_IFCONFIG_STATUS
        depends on BUSYBOX_CONFIG_IFCONFIG
        help
        If ifconfig is called with no arguments it will display the status
        of the currently active interfaces.

config BUSYBOX_CONFIG_FEATURE_IFCONFIG_SLIP
        bool "Enable slip-specific options \"keepalive\" and \"outfill\""
        default BUSYBOX_DEFAULT_FEATURE_IFCONFIG_SLIP
        depends on BUSYBOX_CONFIG_IFCONFIG
        help
        Allow "keepalive" and "outfill" support for SLIP. If you're not
        planning on using serial lines, leave this unchecked.

config BUSYBOX_CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
        bool "Enable options \"mem_start\", \"io_addr\", and \"irq\""
        default BUSYBOX_DEFAULT_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
        depends on BUSYBOX_CONFIG_IFCONFIG
        help
        Allow the start address for shared memory, start address for I/O,
        and/or the interrupt line used by the specified device.

config BUSYBOX_CONFIG_FEATURE_IFCONFIG_HW
        bool "Enable option \"hw\" (ether only)"
        default BUSYBOX_DEFAULT_FEATURE_IFCONFIG_HW
        depends on BUSYBOX_CONFIG_IFCONFIG
        help
        Set the hardware address of this interface, if the device driver
        supports  this  operation. Currently, we only support the 'ether'
        class.

config BUSYBOX_CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS
        bool "Set the broadcast automatically"
        default BUSYBOX_DEFAULT_FEATURE_IFCONFIG_BROADCAST_PLUS
        depends on BUSYBOX_CONFIG_IFCONFIG
        help
        Setting this will make ifconfig attempt to find the broadcast
        automatically if the value '+' is used.
config BUSYBOX_CONFIG_IFENSLAVE
        bool "ifenslave (13 kb)"
        default BUSYBOX_DEFAULT_IFENSLAVE
        help
        Userspace application to bind several interfaces
        to a logical interface (use with kernel bonding driver).
config BUSYBOX_CONFIG_IFPLUGD
        bool "ifplugd (10 kb)"
        default BUSYBOX_DEFAULT_IFPLUGD
        help
        Network interface plug detection daemon.
config BUSYBOX_CONFIG_IFUP
        bool "ifup (14 kb)"
        default BUSYBOX_DEFAULT_IFUP
        help
        Activate the specified interfaces. This applet makes use
        of either "ifconfig" and "route" or the "ip" command to actually
        configure network interfaces. Therefore, you will probably also want
        to enable either IFCONFIG and ROUTE, or enable
        FEATURE_IFUPDOWN_IP and the various IP options. Of
        course you could use non-busybox versions of these programs, so
        against my better judgement (since this will surely result in plenty
        of support questions on the mailing list), I do not force you to
        enable these additional options. It is up to you to supply either
        "ifconfig", "route" and "run-parts" or the "ip" command, either
        via busybox or via standalone utilities.

config BUSYBOX_CONFIG_IFDOWN
        bool "ifdown (13 kb)"
        default BUSYBOX_DEFAULT_IFDOWN
        help
        Deactivate the specified interfaces.

config BUSYBOX_CONFIG_IFUPDOWN_IFSTATE_PATH
        string "Absolute path to ifstate file"
        default BUSYBOX_DEFAULT_IFUPDOWN_IFSTATE_PATH
        depends on BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN
        help
        ifupdown keeps state information in a file called ifstate.
        Typically it is located in /var/run/ifstate, however
        some distributions tend to put it in other places
        (debian, for example, uses /etc/network/run/ifstate).
        This config option defines location of ifstate.

config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
        bool "Use ip tool (else ifconfig/route is used)"
        default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_IP
        depends on BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN
        help
        Use the iproute "ip" command to implement "ifup" and "ifdown", rather
        than the default of using the older "ifconfig" and "route" utilities.

        If Y: you must install either the full-blown iproute2 package
        or enable "ip" applet in busybox, or the "ifup" and "ifdown" applets
        will not work.

        If N: you must install either the full-blown ifconfig and route
        utilities, or enable these applets in busybox.

config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV4
        bool "Support IPv4"
        default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_IPV4
        depends on BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN
        help
        If you want ifup/ifdown to talk IPv4, leave this on.

config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV6
        bool "Support IPv6"
        default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_IPV6
        depends on (BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN) && BUSYBOX_CONFIG_FEATURE_IPV6
        help
        If you need support for IPv6, turn this option on.


config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_MAPPING
        bool "Enable mapping support"
        default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_MAPPING
        depends on BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN
        help
        This enables support for the "mapping" stanza, unless you have
        a weird network setup you don't need it.

config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP
        bool "Support external DHCP clients"
        default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_EXTERNAL_DHCP
        depends on BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN
        help
        This enables support for the external dhcp clients. Clients are
        tried in the following order: dhcpcd, dhclient, pump and udhcpc.
        Otherwise, if udhcpc applet is enabled, it is used.
        Otherwise, ifup/ifdown will have no support for DHCP.
config BUSYBOX_CONFIG_INETD
        bool "inetd (18 kb)"
        default BUSYBOX_DEFAULT_INETD
        select BUSYBOX_CONFIG_FEATURE_SYSLOG
        help
        Internet superserver daemon

config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO
        bool "Support echo service on port 7"
        default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_ECHO
        depends on BUSYBOX_CONFIG_INETD
        help
        Internal service which echoes data back.
        Activated by configuration lines like these:
                echo stream tcp nowait root internal
                echo dgram  udp wait   root internal

config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD
        bool "Support discard service on port 8"
        default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD
        depends on BUSYBOX_CONFIG_INETD
        help
        Internal service which discards all input.
        Activated by configuration lines like these:
                discard stream tcp nowait root internal
                discard dgram  udp wait   root internal

config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME
        bool "Support time service on port 37"
        default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_TIME
        depends on BUSYBOX_CONFIG_INETD
        help
        Internal service which returns big-endian 32-bit number
        of seconds passed since 1900-01-01. The number wraps around
        on overflow.
        Activated by configuration lines like these:
                time stream tcp nowait root internal
                time dgram  udp wait   root internal

config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME
        bool "Support daytime service on port 13"
        default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME
        depends on BUSYBOX_CONFIG_INETD
        help
        Internal service which returns human-readable time.
        Activated by configuration lines like these:
                daytime stream tcp nowait root internal
                daytime dgram  udp wait   root internal

config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN
        bool "Support chargen service on port 19"
        default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN
        depends on BUSYBOX_CONFIG_INETD
        help
        Internal service which generates endless stream
        of all ASCII chars beetween space and char 126.
        Activated by configuration lines like these:
                chargen stream tcp nowait root internal
                chargen dgram  udp wait   root internal

config BUSYBOX_CONFIG_FEATURE_INETD_RPC
        bool "Support RPC services"
        default BUSYBOX_DEFAULT_FEATURE_INETD_RPC  # very rarely used, and needs Sun RPC support in libc
        depends on BUSYBOX_CONFIG_INETD
        help
        Support Sun-RPC based services
config BUSYBOX_CONFIG_IP
        bool "ip (35 kb)"
        default BUSYBOX_DEFAULT_IP
        help
        The "ip" applet is a TCP/IP interface configuration and routing
        utility.
        Short forms (enabled below) are busybox-specific extensions.
        The standard "ip" utility does not provide them. If you are
        trying to be portable, it's better to use "ip CMD" forms.

config BUSYBOX_CONFIG_IPADDR
        bool "ipaddr (14 kb)"
        default BUSYBOX_DEFAULT_IPADDR
        select BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
        help
        Short form of "ip addr"

config BUSYBOX_CONFIG_IPLINK
        bool "iplink (17 kb)"
        default BUSYBOX_DEFAULT_IPLINK
        select BUSYBOX_CONFIG_FEATURE_IP_LINK
        help
        Short form of "ip link"

config BUSYBOX_CONFIG_IPROUTE
        bool "iproute (15 kb)"
        default BUSYBOX_DEFAULT_IPROUTE
        select BUSYBOX_CONFIG_FEATURE_IP_ROUTE
        help
        Short form of "ip route"

config BUSYBOX_CONFIG_IPTUNNEL
        bool "iptunnel (9.6 kb)"
        default BUSYBOX_DEFAULT_IPTUNNEL
        select BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
        help
        Short form of "ip tunnel"

config BUSYBOX_CONFIG_IPRULE
        bool "iprule (10 kb)"
        default BUSYBOX_DEFAULT_IPRULE
        select BUSYBOX_CONFIG_FEATURE_IP_RULE
        help
        Short form of "ip rule"

config BUSYBOX_CONFIG_IPNEIGH
        bool "ipneigh (8.3 kb)"
        default BUSYBOX_DEFAULT_IPNEIGH
        select BUSYBOX_CONFIG_FEATURE_IP_NEIGH
        help
        Short form of "ip neigh"

config BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
        bool "ip address"
        default BUSYBOX_DEFAULT_FEATURE_IP_ADDRESS
        depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPADDR
        help
        Address manipulation support for the "ip" applet.

config BUSYBOX_CONFIG_FEATURE_IP_LINK
        bool "ip link"
        default BUSYBOX_DEFAULT_FEATURE_IP_LINK
        depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPLINK
        help
        Configure network devices with "ip".

config BUSYBOX_CONFIG_FEATURE_IP_ROUTE
        bool "ip route"
        default BUSYBOX_DEFAULT_FEATURE_IP_ROUTE
        depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPROUTE
        help
        Add support for routing table management to "ip".

config BUSYBOX_CONFIG_FEATURE_IP_ROUTE_DIR
        string "ip route configuration directory"
        default BUSYBOX_DEFAULT_FEATURE_IP_ROUTE_DIR
        depends on BUSYBOX_CONFIG_FEATURE_IP_ROUTE
        help
        Location of the "ip" applet routing configuration.

config BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
        bool "ip tunnel"
        default BUSYBOX_DEFAULT_FEATURE_IP_TUNNEL
        depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPTUNNEL
        help
        Add support for tunneling commands to "ip".

config BUSYBOX_CONFIG_FEATURE_IP_RULE
        bool "ip rule"
        default BUSYBOX_DEFAULT_FEATURE_IP_RULE
        depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPRULE
        help
        Add support for rule commands to "ip".

config BUSYBOX_CONFIG_FEATURE_IP_NEIGH
        bool "ip neighbor"
        default BUSYBOX_DEFAULT_FEATURE_IP_NEIGH
        depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPNEIGH
        help
        Add support for neighbor commands to "ip".

config BUSYBOX_CONFIG_FEATURE_IP_RARE_PROTOCOLS
        bool "Support displaying rarely used link types"
        default BUSYBOX_DEFAULT_FEATURE_IP_RARE_PROTOCOLS
        depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPADDR || BUSYBOX_CONFIG_IPLINK || BUSYBOX_CONFIG_IPROUTE || BUSYBOX_CONFIG_IPTUNNEL || BUSYBOX_CONFIG_IPRULE || BUSYBOX_CONFIG_IPNEIGH
        help
        If you are not going to use links of type "frad", "econet",
        "bif" etc, you probably don't need to enable this.
        Ethernet, wireless, infrared, ppp/slip, ip tunnelling
        link types are supported without this option selected.
config BUSYBOX_CONFIG_IPCALC
        bool "ipcalc (4.4 kb)"
        default BUSYBOX_DEFAULT_IPCALC
        help
        ipcalc takes an IP address and netmask and calculates the
        resulting broadcast, network, and host range.

config BUSYBOX_CONFIG_FEATURE_IPCALC_LONG_OPTIONS
        bool "Enable long options"
        default BUSYBOX_DEFAULT_FEATURE_IPCALC_LONG_OPTIONS
        depends on BUSYBOX_CONFIG_IPCALC && BUSYBOX_CONFIG_LONG_OPTS

config BUSYBOX_CONFIG_FEATURE_IPCALC_FANCY
        bool "Fancy IPCALC, more options, adds 1 kbyte"
        default BUSYBOX_DEFAULT_FEATURE_IPCALC_FANCY
        depends on BUSYBOX_CONFIG_IPCALC
        help
        Adds the options hostname, prefix and silent to the output of
        "ipcalc".
config BUSYBOX_CONFIG_FAKEIDENTD
        bool "fakeidentd (8.7 kb)"
        default BUSYBOX_DEFAULT_FAKEIDENTD
        select BUSYBOX_CONFIG_FEATURE_SYSLOG
        help
        fakeidentd listens on the ident port and returns a predefined
        fake value on any query.
config BUSYBOX_CONFIG_NAMEIF
        bool "nameif (6.6 kb)"
        default BUSYBOX_DEFAULT_NAMEIF
        select BUSYBOX_CONFIG_FEATURE_SYSLOG
        help
        nameif is used to rename network interface by its MAC address.
        Renamed interfaces MUST be in the down state.
        It is possible to use a file (default: /etc/mactab)
        with list of new interface names and MACs.
        Maximum interface name length: IFNAMSIZ = 16
        File fields are separated by space or tab.
        File format:
                # Comment
                new_interface_name  XX:XX:XX:XX:XX:XX

config BUSYBOX_CONFIG_FEATURE_NAMEIF_EXTENDED
        bool "Extended nameif"
        default BUSYBOX_DEFAULT_FEATURE_NAMEIF_EXTENDED
        depends on BUSYBOX_CONFIG_NAMEIF
        help
        This extends the nameif syntax to support the bus_info, driver,
        phyaddr selectors. The syntax is compatible to the normal nameif.
        File format:
                new_interface_name  driver=asix bus=usb-0000:00:08.2-3
                new_interface_name  bus=usb-0000:00:08.2-3 00:80:C8:38:91:B5
                new_interface_name  phy_address=2 00:80:C8:38:91:B5
                new_interface_name  mac=00:80:C8:38:91:B5
                new_interface_name  00:80:C8:38:91:B5
config BUSYBOX_CONFIG_NBDCLIENT
        bool "nbd-client (6 kb)"
        default BUSYBOX_DEFAULT_NBDCLIENT
        help
        Network block device client
config BUSYBOX_CONFIG_NC
        bool "nc (11 kb)"
        default BUSYBOX_DEFAULT_NC
        help
        A simple Unix utility which reads and writes data across network
        connections.

config BUSYBOX_CONFIG_NETCAT
        bool "netcat (11 kb)"
        default BUSYBOX_DEFAULT_NETCAT
        help
        Alias to nc.

config BUSYBOX_CONFIG_NC_SERVER
        bool "Netcat server options (-l)"
        default BUSYBOX_DEFAULT_NC_SERVER
        depends on BUSYBOX_CONFIG_NC || BUSYBOX_CONFIG_NETCAT
        help
        Allow netcat to act as a server.

config BUSYBOX_CONFIG_NC_EXTRA
        bool "Netcat extensions (-eiw and -f FILE)"
        default BUSYBOX_DEFAULT_NC_EXTRA
        depends on BUSYBOX_CONFIG_NC || BUSYBOX_CONFIG_NETCAT
        help
        Add -e (support for executing the rest of the command line after
        making or receiving a successful connection), -i (delay interval for
        lines sent), -w (timeout for initial connection).

config BUSYBOX_CONFIG_NC_110_COMPAT
        bool "Netcat 1.10 compatibility (+2.5k)"
        default BUSYBOX_DEFAULT_NC_110_COMPAT
        depends on BUSYBOX_CONFIG_NC || BUSYBOX_CONFIG_NETCAT
        help
        This option makes nc closely follow original nc-1.10.
        The code is about 2.5k bigger. It enables
        -s ADDR, -n, -u, -v, -o FILE, -z options, but loses
        busybox-specific extensions: -f FILE.
config BUSYBOX_CONFIG_NETMSG
        bool "netmsg"
        default BUSYBOX_DEFAULT_NETMSG
        help
          simple program for sending udp broadcast messages
config BUSYBOX_CONFIG_NETSTAT
        bool "netstat (10 kb)"
        default BUSYBOX_DEFAULT_NETSTAT
        help
        netstat prints information about the Linux networking subsystem.

config BUSYBOX_CONFIG_FEATURE_NETSTAT_WIDE
        bool "Enable wide output"
        default BUSYBOX_DEFAULT_FEATURE_NETSTAT_WIDE
        depends on BUSYBOX_CONFIG_NETSTAT
        help
        Add support for wide columns. Useful when displaying IPv6 addresses
        (-W option).

config BUSYBOX_CONFIG_FEATURE_NETSTAT_PRG
        bool "Enable PID/Program name output"
        default BUSYBOX_DEFAULT_FEATURE_NETSTAT_PRG
        depends on BUSYBOX_CONFIG_NETSTAT
        help
        Add support for -p flag to print out PID and program name.
        +700 bytes of code.
config BUSYBOX_CONFIG_NSLOOKUP
        bool "nslookup (9.7 kb)"
        default BUSYBOX_DEFAULT_NSLOOKUP
        help
        nslookup is a tool to query Internet name servers.

config BUSYBOX_CONFIG_FEATURE_NSLOOKUP_BIG
        bool "Use internal resolver code instead of libc"
        depends on BUSYBOX_CONFIG_NSLOOKUP
        default BUSYBOX_DEFAULT_FEATURE_NSLOOKUP_BIG

config BUSYBOX_CONFIG_FEATURE_NSLOOKUP_LONG_OPTIONS
        bool "Enable long options"
        default BUSYBOX_DEFAULT_FEATURE_NSLOOKUP_LONG_OPTIONS
        depends on BUSYBOX_CONFIG_FEATURE_NSLOOKUP_BIG && BUSYBOX_CONFIG_LONG_OPTS
config BUSYBOX_CONFIG_NSLOOKUP_OPENWRT
        bool "nslookup_openwrt"
        depends on !BUSYBOX_CONFIG_NSLOOKUP
        default BUSYBOX_DEFAULT_NSLOOKUP_OPENWRT
        help
          nslookup is a tool to query Internet name servers (LEDE flavor).

config BUSYBOX_CONFIG_FEATURE_NSLOOKUP_OPENWRT_LONG_OPTIONS
       bool "Enable long options"
       default BUSYBOX_DEFAULT_FEATURE_NSLOOKUP_OPENWRT_LONG_OPTIONS
       depends on BUSYBOX_CONFIG_NSLOOKUP_OPENWRT && BUSYBOX_CONFIG_LONG_OPTS
       help
         Support long options for the nslookup applet.
config BUSYBOX_CONFIG_NTPD
        bool "ntpd (22 kb)"
        default BUSYBOX_DEFAULT_NTPD
        help
        The NTP client/server daemon.

config BUSYBOX_CONFIG_FEATURE_NTPD_SERVER
        bool "Make ntpd usable as a NTP server"
        default BUSYBOX_DEFAULT_FEATURE_NTPD_SERVER
        depends on BUSYBOX_CONFIG_NTPD
        help
        Make ntpd usable as a NTP server. If you disable this option
        ntpd will be usable only as a NTP client.

config BUSYBOX_CONFIG_FEATURE_NTPD_CONF
        bool "Make ntpd understand /etc/ntp.conf"
        default BUSYBOX_DEFAULT_FEATURE_NTPD_CONF
        depends on BUSYBOX_CONFIG_NTPD
        help
        Make ntpd look in /etc/ntp.conf for peers. Only "server address"
        is supported.

config BUSYBOX_CONFIG_FEATURE_NTP_AUTH
        bool "Support md5/sha1 message authentication codes"
        default BUSYBOX_DEFAULT_FEATURE_NTP_AUTH
        depends on BUSYBOX_CONFIG_NTPD
config BUSYBOX_CONFIG_PING
        bool "ping (10 kb)"
        default BUSYBOX_DEFAULT_PING
        help
        ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to
        elicit an ICMP ECHO_RESPONSE from a host or gateway.

config BUSYBOX_CONFIG_PING6
        bool "ping6 (11 kb)"
        default BUSYBOX_DEFAULT_PING6
        depends on BUSYBOX_CONFIG_FEATURE_IPV6
        help
        Alias to "ping -6".

config BUSYBOX_CONFIG_FEATURE_FANCY_PING
        bool "Enable fancy ping output"
        default BUSYBOX_DEFAULT_FEATURE_FANCY_PING
        depends on BUSYBOX_CONFIG_PING || BUSYBOX_CONFIG_PING6
        help
        With this option off, ping will say "HOST is alive!"
        or terminate with SIGALRM in 5 seconds otherwise.
        No command-line options will be recognized.
config BUSYBOX_CONFIG_PSCAN
        bool "pscan (6 kb)"
        default BUSYBOX_DEFAULT_PSCAN
        help
        Simple network port scanner.
config BUSYBOX_CONFIG_ROUTE
        bool "route (8.7 kb)"
        default BUSYBOX_DEFAULT_ROUTE
        help
        Route displays or manipulates the kernel's IP routing tables.
config BUSYBOX_CONFIG_SLATTACH
        bool "slattach (6.2 kb)"
        default BUSYBOX_DEFAULT_SLATTACH
        help
        slattach configures serial line as SLIP network interface.
config BUSYBOX_CONFIG_SSL_CLIENT
        bool "ssl_client (25 kb)"
        default BUSYBOX_DEFAULT_SSL_CLIENT
        select BUSYBOX_CONFIG_TLS
        help
        This tool pipes data to/from a socket, TLS-encrypting it.
config BUSYBOX_CONFIG_TC
        bool "tc (8.3 kb)"
        default BUSYBOX_DEFAULT_TC
        help
        Show / manipulate traffic control settings

config BUSYBOX_CONFIG_FEATURE_TC_INGRESS
        bool "Enable ingress"
        default BUSYBOX_DEFAULT_FEATURE_TC_INGRESS
        depends on BUSYBOX_CONFIG_TC
config BUSYBOX_CONFIG_TCPSVD
        bool "tcpsvd (14 kb)"
        default BUSYBOX_DEFAULT_TCPSVD
        help
        tcpsvd listens on a TCP port and runs a program for each new
        connection.

config BUSYBOX_CONFIG_UDPSVD
        bool "udpsvd (13 kb)"
        default BUSYBOX_DEFAULT_UDPSVD
        help
        udpsvd listens on an UDP port and runs a program for each new
        connection.
config BUSYBOX_CONFIG_TELNET
        bool "telnet (8.8 kb)"
        default BUSYBOX_DEFAULT_TELNET
        help
        Telnet is an interface to the TELNET protocol, but is also commonly
        used to test other simple protocols.

config BUSYBOX_CONFIG_FEATURE_TELNET_TTYPE
        bool "Pass TERM type to remote host"
        default BUSYBOX_DEFAULT_FEATURE_TELNET_TTYPE
        depends on BUSYBOX_CONFIG_TELNET
        help
        Setting this option will forward the TERM environment variable to the
        remote host you are connecting to. This is useful to make sure that
        things like ANSI colors and other control sequences behave.

config BUSYBOX_CONFIG_FEATURE_TELNET_AUTOLOGIN
        bool "Pass USER type to remote host"
        default BUSYBOX_DEFAULT_FEATURE_TELNET_AUTOLOGIN
        depends on BUSYBOX_CONFIG_TELNET
        help
        Setting this option will forward the USER environment variable to the
        remote host you are connecting to. This is useful when you need to
        log into a machine without telling the username (autologin). This
        option enables '-a' and '-l USER' options.

config BUSYBOX_CONFIG_FEATURE_TELNET_WIDTH
        bool "Enable window size autodetection"
        default BUSYBOX_DEFAULT_FEATURE_TELNET_WIDTH
        depends on BUSYBOX_CONFIG_TELNET
config BUSYBOX_CONFIG_TELNETD
        bool "telnetd (12 kb)"
        default BUSYBOX_DEFAULT_TELNETD
        select BUSYBOX_CONFIG_FEATURE_SYSLOG
        help
        A daemon for the TELNET protocol, allowing you to log onto the host
        running the daemon. Please keep in mind that the TELNET protocol
        sends passwords in plain text. If you can't afford the space for an
        SSH daemon and you trust your network, you may say 'y' here. As a
        more secure alternative, you should seriously consider installing the
        very small Dropbear SSH daemon instead:
                http://matt.ucc.asn.au/dropbear/dropbear.html

        Note that for busybox telnetd to work you need several things:
        First of all, your kernel needs:
                  CONFIG_UNIX98_PTYS=y

        Next, you need a /dev/pts directory on your root filesystem:

                  $ ls -ld /dev/pts
                  drwxr-xr-x  2 root root 0 Sep 23 13:21 /dev/pts/

        Next you need the pseudo terminal master multiplexer /dev/ptmx:

                  $ ls -la /dev/ptmx
                  crw-rw-rw-  1 root tty 5, 2 Sep 23 13:55 /dev/ptmx

        Any /dev/ttyp[0-9]* files you may have can be removed.
        Next, you need to mount the devpts filesystem on /dev/pts using:

                  mount -t devpts devpts /dev/pts

        You need to be sure that busybox has LOGIN and
        FEATURE_SUID enabled. And finally, you should make
        certain that busybox has been installed setuid root:

                chown root.root /bin/busybox
                chmod 4755 /bin/busybox

        with all that done, telnetd _should_ work....

config BUSYBOX_CONFIG_FEATURE_TELNETD_STANDALONE
        bool "Support standalone telnetd (not inetd only)"
        default BUSYBOX_DEFAULT_FEATURE_TELNETD_STANDALONE
        depends on BUSYBOX_CONFIG_TELNETD
        help
        Selecting this will make telnetd able to run standalone.

config BUSYBOX_CONFIG_FEATURE_TELNETD_INETD_WAIT
        bool "Support -w SEC option (inetd wait mode)"
        default BUSYBOX_DEFAULT_FEATURE_TELNETD_INETD_WAIT
        depends on BUSYBOX_CONFIG_FEATURE_TELNETD_STANDALONE
        help
        This option allows you to run telnetd in "inet wait" mode.
        Example inetd.conf line (note "wait", not usual "nowait"):

        telnet stream tcp wait root /bin/telnetd telnetd -w10

        In this example, inetd passes _listening_ socket_ as fd 0
        to telnetd when connection appears.
        telnetd will wait for connections until all existing
        connections are closed, and no new connections
        appear during 10 seconds. Then it exits, and inetd continues
        to listen for new connections.

        This option is rarely used. "tcp nowait" is much more usual
        way of running tcp services, including telnetd.
        You most probably want to say N here.
config BUSYBOX_CONFIG_TFTP
        bool "tftp (11 kb)"
        default BUSYBOX_DEFAULT_TFTP
        help
        Trivial File Transfer Protocol client. TFTP is usually used
        for simple, small transfers such as a root image
        for a network-enabled bootloader.

config BUSYBOX_CONFIG_FEATURE_TFTP_PROGRESS_BAR
        bool "Enable progress bar"
        default BUSYBOX_DEFAULT_FEATURE_TFTP_PROGRESS_BAR
        depends on BUSYBOX_CONFIG_TFTP

config BUSYBOX_CONFIG_FEATURE_TFTP_HPA_COMPAT
        bool "tftp-hpa compat (support -c get/put FILE)"
        default BUSYBOX_DEFAULT_FEATURE_TFTP_HPA_COMPAT
        depends on BUSYBOX_CONFIG_TFTP

config BUSYBOX_CONFIG_TFTPD
        bool "tftpd (10 kb)"
        default BUSYBOX_DEFAULT_TFTPD
        help
        Trivial File Transfer Protocol server.
        It expects that stdin is a datagram socket and a packet
        is already pending on it. It will exit after one transfer.
        In other words: it should be run from inetd in nowait mode,
        or from udpsvd. Example: "udpsvd -E 0 69 tftpd DIR"

config BUSYBOX_CONFIG_FEATURE_TFTP_GET
        bool "Enable 'tftp get' and/or tftpd upload code"
        default BUSYBOX_DEFAULT_FEATURE_TFTP_GET
        depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
        help
        Add support for the GET command within the TFTP client. This allows
        a client to retrieve a file from a TFTP server.
        Also enable upload support in tftpd, if tftpd is selected.

        Note: this option does _not_ make tftpd capable of download
        (the usual operation people need from it)!

config BUSYBOX_CONFIG_FEATURE_TFTP_PUT
        bool "Enable 'tftp put' and/or tftpd download code"
        default BUSYBOX_DEFAULT_FEATURE_TFTP_PUT
        depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
        help
        Add support for the PUT command within the TFTP client. This allows
        a client to transfer a file to a TFTP server.
        Also enable download support in tftpd, if tftpd is selected.

config BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE
        bool "Enable 'blksize' and 'tsize' protocol options"
        default BUSYBOX_DEFAULT_FEATURE_TFTP_BLOCKSIZE
        depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
        help
        Allow tftp to specify block size, and tftpd to understand
        "blksize" and "tsize" options.

config BUSYBOX_CONFIG_TFTP_DEBUG
        bool "Enable debug"
        default BUSYBOX_DEFAULT_TFTP_DEBUG
        depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
        help
        Make tftp[d] print debugging messages on stderr.
        This is useful if you are diagnosing a bug in tftp[d].
config BUSYBOX_CONFIG_TLS
        bool #No description makes it a hidden option
        default BUSYBOX_DEFAULT_TLS
config BUSYBOX_CONFIG_TRACEROUTE
        bool "traceroute (11 kb)"
        default BUSYBOX_DEFAULT_TRACEROUTE
        help
        Utility to trace the route of IP packets.

config BUSYBOX_CONFIG_TRACEROUTE6
        bool "traceroute6 (13 kb)"
        default BUSYBOX_DEFAULT_TRACEROUTE6
        depends on BUSYBOX_CONFIG_FEATURE_IPV6
        help
        Utility to trace the route of IPv6 packets.

config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_VERBOSE
        bool "Enable verbose output"
        default BUSYBOX_DEFAULT_FEATURE_TRACEROUTE_VERBOSE
        depends on BUSYBOX_CONFIG_TRACEROUTE || BUSYBOX_CONFIG_TRACEROUTE6
        help
        Add some verbosity to traceroute. This includes among other things
        hostnames and ICMP response types.

config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_USE_ICMP
        bool "Enable -I option (use ICMP instead of UDP)"
        default BUSYBOX_DEFAULT_FEATURE_TRACEROUTE_USE_ICMP
        depends on BUSYBOX_CONFIG_TRACEROUTE || BUSYBOX_CONFIG_TRACEROUTE6
config BUSYBOX_CONFIG_TUNCTL
        bool "tunctl (6.2 kb)"
        default BUSYBOX_DEFAULT_TUNCTL
        help
        tunctl creates or deletes tun devices.

config BUSYBOX_CONFIG_FEATURE_TUNCTL_UG
        bool "Support owner:group assignment"
        default BUSYBOX_DEFAULT_FEATURE_TUNCTL_UG
        depends on BUSYBOX_CONFIG_TUNCTL
        help
        Allow to specify owner and group of newly created interface.
        340 bytes of pure bloat. Say no here.
config BUSYBOX_CONFIG_VCONFIG
        bool "vconfig (2.3 kb)"
        default BUSYBOX_DEFAULT_VCONFIG
        help
        Creates, removes, and configures VLAN interfaces
config BUSYBOX_CONFIG_WGET
        bool "wget (38 kb)"
        default BUSYBOX_DEFAULT_WGET
        help
        wget is a utility for non-interactive download of files from HTTP
        and FTP servers.

config BUSYBOX_CONFIG_FEATURE_WGET_LONG_OPTIONS
        bool "Enable long options"
        default BUSYBOX_DEFAULT_FEATURE_WGET_LONG_OPTIONS
        depends on BUSYBOX_CONFIG_WGET && BUSYBOX_CONFIG_LONG_OPTS

config BUSYBOX_CONFIG_FEATURE_WGET_STATUSBAR
        bool "Enable progress bar (+2k)"
        default BUSYBOX_DEFAULT_FEATURE_WGET_STATUSBAR
        depends on BUSYBOX_CONFIG_WGET

config BUSYBOX_CONFIG_FEATURE_WGET_AUTHENTICATION
        bool "Enable HTTP authentication"
        default BUSYBOX_DEFAULT_FEATURE_WGET_AUTHENTICATION
        depends on BUSYBOX_CONFIG_WGET
        help
        Support authenticated HTTP transfers.

config BUSYBOX_CONFIG_FEATURE_WGET_TIMEOUT
        bool "Enable timeout option -T SEC"
        default BUSYBOX_DEFAULT_FEATURE_WGET_TIMEOUT
        depends on BUSYBOX_CONFIG_WGET
        help
        Supports network read and connect timeouts for wget,
        so that wget will give up and timeout, through the -T
        command line option.

        Currently only connect and network data read timeout are
        supported (i.e., timeout is not applied to the DNS query). When
        FEATURE_WGET_LONG_OPTIONS is also enabled, the --timeout option
        will work in addition to -T.

config BUSYBOX_CONFIG_FEATURE_WGET_HTTPS
        bool "Support HTTPS using internal TLS code"
        default BUSYBOX_DEFAULT_FEATURE_WGET_HTTPS
        depends on BUSYBOX_CONFIG_WGET
        select BUSYBOX_CONFIG_TLS
        help
        wget will use internal TLS code to connect to https:// URLs.
        Note:
        On NOMMU machines, ssl_helper applet should be available
        in the $PATH for this to work. Make sure to select that applet.

        Note: currently, TLS code only makes TLS I/O work, it
        does *not* check that the peer is who it claims to be, etc.
        IOW: it uses peer-supplied public keys to establish encryption
        and signing keys, then encrypts and signs outgoing data and
        decrypts incoming data.
        It does not check signature hashes on the incoming data:
        this means that attackers manipulating TCP packets can
        send altered data and we unknowingly receive garbage.
        (This check might be relatively easy to add).
        It does not check public key's certificate:
        this means that the peer may be an attacker impersonating
        the server we think we are talking to.

        If you think this is unacceptable, consider this. As more and more
        servers switch to HTTPS-only operation, without such "crippled"
        TLS code it is *impossible* to simply download a kernel source
        from kernel.org. Which can in real world translate into
        "my small automatic tooling to build cross-compilers from sources
        no longer works, I need to additionally keep a local copy
        of ~4 megabyte source tarball of a SSL library and ~2 megabyte
        source of wget, need to compile and built both before I can
        download anything. All this despite the fact that the build
        is done in a QEMU sandbox on a machine with absolutely nothing
        worth stealing, so I don't care if someone would go to a lot
        of trouble to intercept my HTTPS download to send me an altered
        kernel tarball".

        If you still think this is unacceptable, send patches.

        If you still think this is unacceptable, do not want to send
        patches, but do want to waste bandwidth expaining how wrong
        it is, you will be ignored.

        FEATURE_WGET_OPENSSL does implement TLS verification
        using the certificates available to OpenSSL.

config BUSYBOX_CONFIG_FEATURE_WGET_OPENSSL
        bool "Try to connect to HTTPS using openssl"
        default BUSYBOX_DEFAULT_FEATURE_WGET_OPENSSL
        depends on BUSYBOX_CONFIG_WGET
        help
        Try to use openssl to handle HTTPS.

        OpenSSL has a simple SSL client for debug purposes.
        If you select this option, wget will effectively run:
        "openssl s_client -quiet -connect hostname:443
        -servername hostname 2>/dev/null" and pipe its data
        through it. -servername is not used if hostname is numeric.
        Note inconvenient API: host resolution is done twice,
        and there is no guarantee openssl's idea of IPv6 address
        format is the same as ours.
        Another problem is that s_client prints debug information
        to stderr, and it needs to be suppressed. This means
        all error messages get suppressed too.
        openssl is also a big binary, often dynamically linked
        against ~15 libraries.

        If openssl can't be executed, internal TLS code will be used
        (if you enabled it); if openssl can be executed but fails later,
        wget can't detect this, and download will fail.

        By default TLS verification is performed, unless
        --no-check-certificate option is passed.
config BUSYBOX_CONFIG_WHOIS
        bool "whois (6.3 kb)"
        default BUSYBOX_DEFAULT_WHOIS
        help
        whois is a client for the whois directory service
config BUSYBOX_CONFIG_ZCIP
        bool "zcip (8.4 kb)"
        default BUSYBOX_DEFAULT_ZCIP
        select BUSYBOX_CONFIG_FEATURE_SYSLOG
        help
        ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927.
        It's a daemon that allocates and defends a dynamically assigned
        address on the 169.254/16 network, requiring no system administrator.

        See http://www.zeroconf.org for further details, and "zcip.script"
        in the busybox examples.

source "udhcp/Config.in"

config BUSYBOX_CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS
        string "ifup udhcpc command line options"
        default BUSYBOX_DEFAULT_IFUPDOWN_UDHCPC_CMD_OPTIONS
        depends on BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN
        help
        Command line options to pass to udhcpc from ifup.
        Intended to alter options not available in /etc/network/interfaces.
        (IE: --syslog --background etc...)

endmenu