package/utils/busybox/config/util-linux/Config.in

   1 # DO NOT EDIT. This file is generated from Config.src
   2 #
   3 # For a description of the syntax of this configuration file,
   4 # see scripts/kbuild/config-language.txt.
   5 #
   6
   7 menu "Linux System Utilities"
   8
   9 config BUSYBOX_CONFIG_ACPID
  10         bool "acpid"
  11         default BUSYBOX_DEFAULT_ACPID
  12         select BUSYBOX_CONFIG_PLATFORM_LINUX
  13         help
  14           acpid listens to ACPI events coming either in textual form from
  15           /proc/acpi/event (though it is marked deprecated it is still widely
  16           used and _is_ a standard) or in binary form from specified evdevs
  17           (just use /dev/input/event*).
  18
  19           It parses the event to retrieve ACTION and a possible PARAMETER.
  20           It then spawns /etc/acpi/<ACTION>[/<PARAMETER>] either via run-parts
  21           (if the resulting path is a directory) or directly as an executable.
  22
  23           N.B. acpid relies on run-parts so have the latter installed.
  24
  25 config BUSYBOX_CONFIG_FEATURE_ACPID_COMPAT
  26         bool "Accept and ignore redundant options"
  27         default BUSYBOX_DEFAULT_FEATURE_ACPID_COMPAT
  28         depends on BUSYBOX_CONFIG_ACPID
  29         help
  30           Accept and ignore compatibility options -g -m -s -S -v.
  31 config BUSYBOX_CONFIG_BLKDISCARD
  32         bool "blkdiscard"
  33         default BUSYBOX_DEFAULT_BLKDISCARD
  34         help
  35           blkdiscard discards sectors on a given device.
  36 config BUSYBOX_CONFIG_BLKID
  37         bool "blkid"
  38         default BUSYBOX_DEFAULT_BLKID
  39         select BUSYBOX_CONFIG_PLATFORM_LINUX
  40         select BUSYBOX_CONFIG_VOLUMEID
  41         help
  42           Lists labels and UUIDs of all filesystems.
  43           WARNING:
  44           With all submodules selected, it will add ~8k to busybox.
  45
  46 config BUSYBOX_CONFIG_FEATURE_BLKID_TYPE
  47         bool "Print filesystem type"
  48         default BUSYBOX_DEFAULT_FEATURE_BLKID_TYPE
  49         depends on BUSYBOX_CONFIG_BLKID
  50         help
  51           Show TYPE="filesystem type"
  52 config BUSYBOX_CONFIG_BLOCKDEV
  53         bool "blockdev"
  54         default BUSYBOX_DEFAULT_BLOCKDEV
  55         help
  56           Performs some ioctls with block devices.
  57 config BUSYBOX_CONFIG_CAL
  58         bool "cal"
  59         default BUSYBOX_DEFAULT_CAL
  60         help
  61           cal is used to display a monthly calendar.
  62 config BUSYBOX_CONFIG_CHRT
  63         bool "chrt"
  64         default BUSYBOX_DEFAULT_CHRT
  65         help
  66           manipulate real-time attributes of a process.
  67           This requires sched_{g,s}etparam support in your libc.
  68 config BUSYBOX_CONFIG_DMESG
  69         bool "dmesg"
  70         default BUSYBOX_DEFAULT_DMESG
  71         select BUSYBOX_CONFIG_PLATFORM_LINUX
  72         help
  73           dmesg is used to examine or control the kernel ring buffer. When the
  74           Linux kernel prints messages to the system log, they are stored in
  75           the kernel ring buffer. You can use dmesg to print the kernel's ring
  76           buffer, clear the kernel ring buffer, change the size of the kernel
  77           ring buffer, and change the priority level at which kernel messages
  78           are also logged to the system console. Enable this option if you
  79           wish to enable the 'dmesg' utility.
  80
  81 config BUSYBOX_CONFIG_FEATURE_DMESG_PRETTY
  82         bool "Pretty output"
  83         default BUSYBOX_DEFAULT_FEATURE_DMESG_PRETTY
  84         depends on BUSYBOX_CONFIG_DMESG
  85         help
  86           If you wish to scrub the syslog level from the output, say 'Y' here.
  87           The syslog level is a string prefixed to every line with the form
  88           "<#>".
  89
  90           With this option you will see:
  91             # dmesg
  92             Linux version 2.6.17.4 .....
  93             BIOS-provided physical RAM map:
  94              BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
  95
  96           Without this option you will see:
  97             # dmesg
  98             <5>Linux version 2.6.17.4 .....
  99             <6>BIOS-provided physical RAM map:
 100             <6> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
 101 config BUSYBOX_CONFIG_EJECT
 102         bool "eject"
 103         default BUSYBOX_DEFAULT_EJECT
 104         select BUSYBOX_CONFIG_PLATFORM_LINUX
 105         help
 106           Used to eject cdroms. (defaults to /dev/cdrom)
 107
 108 config BUSYBOX_CONFIG_FEATURE_EJECT_SCSI
 109         bool "SCSI support"
 110         default BUSYBOX_DEFAULT_FEATURE_EJECT_SCSI
 111         depends on BUSYBOX_CONFIG_EJECT
 112         help
 113           Add the -s option to eject, this allows to eject SCSI-Devices and
 114           usb-storage devices.
 115 config BUSYBOX_CONFIG_FALLOCATE
 116         bool "fallocate"
 117         default BUSYBOX_DEFAULT_FALLOCATE
 118         help
 119           Preallocate space for files.
 120 config BUSYBOX_CONFIG_FATATTR
 121         bool "fatattr"
 122         default BUSYBOX_DEFAULT_FATATTR
 123         select BUSYBOX_CONFIG_PLATFORM_LINUX
 124         help
 125           fatattr lists or changes the file attributes on a fat file system.
 126 config BUSYBOX_CONFIG_FBSET
 127         bool "fbset"
 128         default BUSYBOX_DEFAULT_FBSET
 129         select BUSYBOX_CONFIG_PLATFORM_LINUX
 130         help
 131           fbset is used to show or change the settings of a Linux frame buffer
 132           device. The frame buffer device provides a simple and unique
 133           interface to access a graphics display. Enable this option
 134           if you wish to enable the 'fbset' utility.
 135
 136 config BUSYBOX_CONFIG_FEATURE_FBSET_FANCY
 137         bool "Enable extra options"
 138         default BUSYBOX_DEFAULT_FEATURE_FBSET_FANCY
 139         depends on BUSYBOX_CONFIG_FBSET
 140         help
 141           This option enables extended fbset options, allowing one to set the
 142           framebuffer size, color depth, etc. interface to access a graphics
 143           display. Enable this option if you wish to enable extended fbset
 144           options.
 145
 146 config BUSYBOX_CONFIG_FEATURE_FBSET_READMODE
 147         bool "Enable readmode support"
 148         default BUSYBOX_DEFAULT_FEATURE_FBSET_READMODE
 149         depends on BUSYBOX_CONFIG_FBSET
 150         help
 151           This option allows fbset to read the video mode database stored by
 152           default BUSYBOX_DEFAULT_FEATURE_FBSET_READMODE /etc/fb.modes, which can be used to set frame buffer
 153           device to pre-defined video modes.
 154 config BUSYBOX_CONFIG_FDFORMAT
 155         bool "fdformat"
 156         default BUSYBOX_DEFAULT_FDFORMAT
 157         select BUSYBOX_CONFIG_PLATFORM_LINUX
 158         help
 159           fdformat is used to low-level format a floppy disk.
 160 config BUSYBOX_CONFIG_FDISK
 161         bool "fdisk"
 162         default BUSYBOX_DEFAULT_FDISK
 163         select BUSYBOX_CONFIG_PLATFORM_LINUX
 164         help
 165           The fdisk utility is used to divide hard disks into one or more
 166           logical disks, which are generally called partitions. This utility
 167           can be used to list and edit the set of partitions or BSD style
 168           'disk slices' that are defined on a hard drive.
 169
 170 config BUSYBOX_CONFIG_FDISK_SUPPORT_LARGE_DISKS
 171         bool "Support over 4GB disks"
 172         default BUSYBOX_DEFAULT_FDISK_SUPPORT_LARGE_DISKS
 173         depends on BUSYBOX_CONFIG_FDISK
 174         depends on !BUSYBOX_CONFIG_LFS   # with LFS no special code is needed
 175
 176 config BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
 177         bool "Write support"
 178         default BUSYBOX_DEFAULT_FEATURE_FDISK_WRITABLE
 179         depends on BUSYBOX_CONFIG_FDISK
 180         help
 181           Enabling this option allows you to create or change a partition table
 182           and write those changes out to disk. If you leave this option
 183           disabled, you will only be able to view the partition table.
 184
 185 config BUSYBOX_CONFIG_FEATURE_AIX_LABEL
 186         bool "Support AIX disklabels"
 187         default BUSYBOX_DEFAULT_FEATURE_AIX_LABEL
 188         depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
 189         help
 190           Enabling this option allows you to create or change AIX disklabels.
 191           Most people can safely leave this option disabled.
 192
 193 config BUSYBOX_CONFIG_FEATURE_SGI_LABEL
 194         bool "Support SGI disklabels"
 195         default BUSYBOX_DEFAULT_FEATURE_SGI_LABEL
 196         depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
 197         help
 198           Enabling this option allows you to create or change SGI disklabels.
 199           Most people can safely leave this option disabled.
 200
 201 config BUSYBOX_CONFIG_FEATURE_SUN_LABEL
 202         bool "Support SUN disklabels"
 203         default BUSYBOX_DEFAULT_FEATURE_SUN_LABEL
 204         depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
 205         help
 206           Enabling this option allows you to create or change SUN disklabels.
 207           Most people can safely leave this option disabled.
 208
 209 config BUSYBOX_CONFIG_FEATURE_OSF_LABEL
 210         bool "Support BSD disklabels"
 211         default BUSYBOX_DEFAULT_FEATURE_OSF_LABEL
 212         depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
 213         help
 214           Enabling this option allows you to create or change BSD disklabels
 215           and define and edit BSD disk slices.
 216
 217 config BUSYBOX_CONFIG_FEATURE_GPT_LABEL
 218         bool "Support GPT disklabels"
 219         default BUSYBOX_DEFAULT_FEATURE_GPT_LABEL
 220         depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
 221         help
 222           Enabling this option allows you to view GUID Partition Table
 223           disklabels.
 224
 225 config BUSYBOX_CONFIG_FEATURE_FDISK_ADVANCED
 226         bool "Support expert mode"
 227         default BUSYBOX_DEFAULT_FEATURE_FDISK_ADVANCED
 228         depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
 229         help
 230           Enabling this option allows you to do terribly unsafe things like
 231           define arbitrary drive geometry, move the beginning of data in a
 232           partition, and similarly evil things. Unless you have a very good
 233           reason you would be wise to leave this disabled.
 234 config BUSYBOX_CONFIG_FINDFS
 235         bool "findfs"
 236         default BUSYBOX_DEFAULT_FINDFS
 237         select BUSYBOX_CONFIG_PLATFORM_LINUX
 238         select BUSYBOX_CONFIG_VOLUMEID
 239         help
 240           Prints the name of a filesystem with given label or UUID.
 241           WARNING:
 242           With all submodules selected, it will add ~8k to busybox.
 243 config BUSYBOX_CONFIG_FLOCK
 244         bool "flock"
 245         default BUSYBOX_DEFAULT_FLOCK
 246         help
 247           Manage locks from shell scripts
 248 config BUSYBOX_CONFIG_FDFLUSH
 249         bool "fdflush"
 250         default BUSYBOX_DEFAULT_FDFLUSH
 251         select BUSYBOX_CONFIG_PLATFORM_LINUX
 252         help
 253           fdflush is only needed when changing media on slightly-broken
 254           removable media drives. It is used to make Linux believe that a
 255           hardware disk-change switch has been actuated, which causes Linux to
 256           forget anything it has cached from the previous media. If you have
 257           such a slightly-broken drive, you will need to run fdflush every time
 258           you change a disk. Most people have working hardware and can safely
 259           leave this disabled.
 260
 261 config BUSYBOX_CONFIG_FREERAMDISK
 262         bool "freeramdisk"
 263         default BUSYBOX_DEFAULT_FREERAMDISK
 264         select BUSYBOX_CONFIG_PLATFORM_LINUX
 265         help
 266           Linux allows you to create ramdisks. This utility allows you to
 267           delete them and completely free all memory that was used for the
 268           ramdisk. For example, if you boot Linux into a ramdisk and later
 269           pivot_root, you may want to free the memory that is allocated to the
 270           ramdisk. If you have no use for freeing memory from a ramdisk, leave
 271           this disabled.
 272 config BUSYBOX_CONFIG_FSCK_MINIX
 273         bool "fsck_minix"
 274         default BUSYBOX_DEFAULT_FSCK_MINIX
 275         help
 276           The minix filesystem is a nice, small, compact, read-write filesystem
 277           with little overhead. It is not a journaling filesystem however and
 278           can experience corruption if it is not properly unmounted or if the
 279           power goes off in the middle of a write. This utility allows you to
 280           check for and attempt to repair any corruption that occurs to a minix
 281           filesystem.
 282 config BUSYBOX_CONFIG_FSFREEZE
 283         bool "fsfreeze"
 284         default BUSYBOX_DEFAULT_FSFREEZE
 285         select BUSYBOX_CONFIG_PLATFORM_LINUX
 286         select BUSYBOX_CONFIG_LONG_OPTS
 287         help
 288           Halt new accesses and flush writes on a mounted filesystem.
 289 config BUSYBOX_CONFIG_FSTRIM
 290         bool "fstrim"
 291         default BUSYBOX_DEFAULT_FSTRIM
 292         select BUSYBOX_CONFIG_PLATFORM_LINUX
 293         help
 294           Discard unused blocks on a mounted filesystem.
 295 config BUSYBOX_CONFIG_GETOPT
 296         bool "getopt"
 297         default BUSYBOX_DEFAULT_GETOPT
 298         help
 299           The getopt utility is used to break up (parse) options in command
 300           lines to make it easy to write complex shell scripts that also check
 301           for legal (and illegal) options. If you want to write horribly
 302           complex shell scripts, or use some horribly complex shell script
 303           written by others, this utility may be for you. Most people will
 304           wisely leave this disabled.
 305
 306 config BUSYBOX_CONFIG_FEATURE_GETOPT_LONG
 307         bool "Support option -l"
 308         default BUSYBOX_DEFAULT_FEATURE_GETOPT_LONG if BUSYBOX_CONFIG_LONG_OPTS
 309         depends on BUSYBOX_CONFIG_GETOPT
 310         help
 311           Enable support for long options (option -l).
 312 config BUSYBOX_CONFIG_HEXDUMP
 313         bool "hexdump"
 314         default BUSYBOX_DEFAULT_HEXDUMP
 315         help
 316           The hexdump utility is used to display binary data in a readable
 317           way that is comparable to the output from most hex editors.
 318
 319 config BUSYBOX_CONFIG_FEATURE_HEXDUMP_REVERSE
 320         bool "Support -R, reverse of 'hexdump -Cv'"
 321         default BUSYBOX_DEFAULT_FEATURE_HEXDUMP_REVERSE
 322         depends on BUSYBOX_CONFIG_HEXDUMP
 323         help
 324           The hexdump utility is used to display binary data in an ascii
 325           readable way. This option creates binary data from an ascii input.
 326           NB: this option is non-standard. It's unwise to use it in scripts
 327           aimed to be portable.
 328
 329 config BUSYBOX_CONFIG_HD
 330         bool "hd"
 331         default BUSYBOX_DEFAULT_HD
 332         help
 333           hd is an alias to hexdump -C.
 334 config BUSYBOX_CONFIG_XXD
 335         bool "xxd"
 336         default BUSYBOX_DEFAULT_XXD
 337         help
 338           The xxd utility is used to display binary data in a readable
 339           way that is comparable to the output from most hex editors.
 340 config BUSYBOX_CONFIG_HWCLOCK
 341         bool "hwclock"
 342         default BUSYBOX_DEFAULT_HWCLOCK
 343         select BUSYBOX_CONFIG_PLATFORM_LINUX
 344         help
 345           The hwclock utility is used to read and set the hardware clock
 346           on a system. This is primarily used to set the current time on
 347           shutdown in the hardware clock, so the hardware will keep the
 348           correct time when Linux is _not_ running.
 349
 350 config BUSYBOX_CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS
 351         bool "Support long options (--hctosys,...)"
 352         default BUSYBOX_DEFAULT_FEATURE_HWCLOCK_LONG_OPTIONS
 353         depends on BUSYBOX_CONFIG_HWCLOCK && BUSYBOX_CONFIG_LONG_OPTS
 354
 355 config BUSYBOX_CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS
 356         bool "Use FHS /var/lib/hwclock/adjtime"
 357         default BUSYBOX_DEFAULT_FEATURE_HWCLOCK_ADJTIME_FHS  # util-linux-ng in Fedora 13 still uses /etc/adjtime
 358         depends on BUSYBOX_CONFIG_HWCLOCK
 359         help
 360           Starting with FHS 2.3, the adjtime state file is supposed to exist
 361           at /var/lib/hwclock/adjtime instead of /etc/adjtime. If you wish
 362           to use the FHS behavior, answer Y here, otherwise answer N for the
 363           classic /etc/adjtime path.
 364
 365           pathname.com/fhs/pub/fhs-2.3.html#VARLIBHWCLOCKSTATEDIRECTORYFORHWCLO
 366 config BUSYBOX_CONFIG_IONICE
 367         bool "ionice"
 368         default BUSYBOX_DEFAULT_IONICE
 369         select BUSYBOX_CONFIG_PLATFORM_LINUX
 370         help
 371           Set/set program io scheduling class and priority
 372           Requires kernel >= 2.6.13
 373 config BUSYBOX_CONFIG_IPCRM
 374         bool "ipcrm"
 375         default BUSYBOX_DEFAULT_IPCRM
 376         help
 377           The ipcrm utility allows the removal of System V interprocess
 378           communication (IPC) objects and the associated data structures
 379           from the system.
 380 config BUSYBOX_CONFIG_IPCS
 381         bool "ipcs"
 382         default BUSYBOX_DEFAULT_IPCS
 383         select BUSYBOX_CONFIG_PLATFORM_LINUX
 384         help
 385           The ipcs utility is used to provide information on the currently
 386           allocated System V interprocess (IPC) objects in the system.
 387 config BUSYBOX_CONFIG_LAST
 388         bool "last"
 389         default BUSYBOX_DEFAULT_LAST
 390         depends on BUSYBOX_CONFIG_FEATURE_WTMP
 391         help
 392           'last' displays a list of the last users that logged into the system.
 393
 394 config BUSYBOX_CONFIG_FEATURE_LAST_FANCY
 395         bool "Output extra information"
 396         default BUSYBOX_DEFAULT_FEATURE_LAST_FANCY
 397         depends on BUSYBOX_CONFIG_LAST
 398         help
 399           'last' displays detailed information about the last users that
 400           logged into the system (mimics sysvinit last). +900 bytes.
 401 config BUSYBOX_CONFIG_LOSETUP
 402         bool "losetup"
 403         default BUSYBOX_DEFAULT_LOSETUP
 404         select BUSYBOX_CONFIG_PLATFORM_LINUX
 405         help
 406           losetup is used to associate or detach a loop device with a regular
 407           file or block device, and to query the status of a loop device. This
 408           version does not currently support enabling data encryption.
 409 config BUSYBOX_CONFIG_LSPCI
 410         bool "lspci"
 411         default BUSYBOX_DEFAULT_LSPCI
 412         #select PLATFORM_LINUX
 413         help
 414           lspci is a utility for displaying information about PCI buses in the
 415           system and devices connected to them.
 416
 417           This version uses sysfs (/sys/bus/pci/devices) only.
 418 config BUSYBOX_CONFIG_LSUSB
 419         bool "lsusb"
 420         default BUSYBOX_DEFAULT_LSUSB
 421         #select PLATFORM_LINUX
 422         help
 423           lsusb is a utility for displaying information about USB buses in the
 424           system and devices connected to them.
 425
 426           This version uses sysfs (/sys/bus/usb/devices) only.
 427 config BUSYBOX_CONFIG_MDEV
 428         bool "mdev"
 429         default BUSYBOX_DEFAULT_MDEV
 430         select BUSYBOX_CONFIG_PLATFORM_LINUX
 431         help
 432           mdev is a mini-udev implementation for dynamically creating device
 433           nodes in the /dev directory.
 434
 435           For more information, please see docs/mdev.txt
 436
 437 config BUSYBOX_CONFIG_FEATURE_MDEV_CONF
 438         bool "Support /etc/mdev.conf"
 439         default BUSYBOX_DEFAULT_FEATURE_MDEV_CONF
 440         depends on BUSYBOX_CONFIG_MDEV
 441         help
 442           Add support for the mdev config file to control ownership and
 443           permissions of the device nodes.
 444
 445           For more information, please see docs/mdev.txt
 446
 447 config BUSYBOX_CONFIG_FEATURE_MDEV_RENAME
 448         bool "Support subdirs/symlinks"
 449         default BUSYBOX_DEFAULT_FEATURE_MDEV_RENAME
 450         depends on BUSYBOX_CONFIG_FEATURE_MDEV_CONF
 451         help
 452           Add support for renaming devices and creating symlinks.
 453
 454           For more information, please see docs/mdev.txt
 455
 456 config BUSYBOX_CONFIG_FEATURE_MDEV_RENAME_REGEXP
 457         bool "Support regular expressions substitutions when renaming device"
 458         default BUSYBOX_DEFAULT_FEATURE_MDEV_RENAME_REGEXP
 459         depends on BUSYBOX_CONFIG_FEATURE_MDEV_RENAME
 460         help
 461           Add support for regular expressions substitutions when renaming
 462           device.
 463
 464 config BUSYBOX_CONFIG_FEATURE_MDEV_EXEC
 465         bool "Support command execution at device addition/removal"
 466         default BUSYBOX_DEFAULT_FEATURE_MDEV_EXEC
 467         depends on BUSYBOX_CONFIG_FEATURE_MDEV_CONF
 468         help
 469           This adds support for an optional field to /etc/mdev.conf for
 470           executing commands when devices are created/removed.
 471
 472           For more information, please see docs/mdev.txt
 473
 474 config BUSYBOX_CONFIG_FEATURE_MDEV_LOAD_FIRMWARE
 475         bool "Support loading of firmwares"
 476         default BUSYBOX_DEFAULT_FEATURE_MDEV_LOAD_FIRMWARE
 477         depends on BUSYBOX_CONFIG_MDEV
 478         help
 479           Some devices need to load firmware before they can be usable.
 480
 481           These devices will request userspace look up the files in
 482           /lib/firmware/ and if it exists, send it to the kernel for
 483           loading into the hardware.
 484 config BUSYBOX_CONFIG_MESG
 485         bool "mesg"
 486         default BUSYBOX_DEFAULT_MESG
 487         help
 488           Mesg controls access to your terminal by others. It is typically
 489           used to allow or disallow other users to write to your terminal
 490
 491 config BUSYBOX_CONFIG_FEATURE_MESG_ENABLE_ONLY_GROUP
 492         bool "Enable writing to tty only by group, not by everybody"
 493         default BUSYBOX_DEFAULT_FEATURE_MESG_ENABLE_ONLY_GROUP
 494         depends on BUSYBOX_CONFIG_MESG
 495         help
 496           Usually, ttys are owned by group "tty", and "write" tool is
 497           setgid to this group. This way, "mesg y" only needs to enable
 498           "write by owning group" bit in tty mode.
 499
 500           If you set this option to N, "mesg y" will enable writing
 501           by anybody at all. This is not recommended.
 502 config BUSYBOX_CONFIG_MKE2FS
 503         bool "mke2fs"
 504         default BUSYBOX_DEFAULT_MKE2FS
 505         select BUSYBOX_CONFIG_PLATFORM_LINUX
 506         help
 507           Utility to create EXT2 filesystems.
 508
 509 config BUSYBOX_CONFIG_MKFS_EXT2
 510         bool "mkfs.ext2"
 511         default BUSYBOX_DEFAULT_MKFS_EXT2
 512         select BUSYBOX_CONFIG_PLATFORM_LINUX
 513         help
 514           Alias to "mke2fs".
 515 config BUSYBOX_CONFIG_MKFS_MINIX
 516         bool "mkfs_minix"
 517         default BUSYBOX_DEFAULT_MKFS_MINIX
 518         select BUSYBOX_CONFIG_PLATFORM_LINUX
 519         help
 520           The minix filesystem is a nice, small, compact, read-write filesystem
 521           with little overhead. If you wish to be able to create minix
 522           filesystems this utility will do the job for you.
 523
 524 config BUSYBOX_CONFIG_FEATURE_MINIX2
 525         bool "Support Minix fs v2 (fsck_minix/mkfs_minix)"
 526         default BUSYBOX_DEFAULT_FEATURE_MINIX2
 527         depends on BUSYBOX_CONFIG_FSCK_MINIX || BUSYBOX_CONFIG_MKFS_MINIX
 528         help
 529           If you wish to be able to create version 2 minix filesystems, enable
 530           this. If you enabled 'mkfs_minix' then you almost certainly want to
 531           be using the version 2 filesystem support.
 532 config BUSYBOX_CONFIG_MKFS_REISER
 533         bool "mkfs_reiser"
 534         default BUSYBOX_DEFAULT_MKFS_REISER
 535         select BUSYBOX_CONFIG_PLATFORM_LINUX
 536         help
 537           Utility to create ReiserFS filesystems.
 538           Note: this applet needs a lot of testing and polishing.
 539 config BUSYBOX_CONFIG_MKDOSFS
 540         bool "mkdosfs"
 541         default BUSYBOX_DEFAULT_MKDOSFS
 542         select BUSYBOX_CONFIG_PLATFORM_LINUX
 543         help
 544           Utility to create FAT32 filesystems.
 545
 546 config BUSYBOX_CONFIG_MKFS_VFAT
 547         bool "mkfs.vfat"
 548         default BUSYBOX_DEFAULT_MKFS_VFAT
 549         select BUSYBOX_CONFIG_PLATFORM_LINUX
 550         help
 551           Alias to "mkdosfs".
 552 config BUSYBOX_CONFIG_MKSWAP
 553         bool "mkswap"
 554         default BUSYBOX_DEFAULT_MKSWAP
 555         help
 556           The mkswap utility is used to configure a file or disk partition as
 557           Linux swap space. This allows Linux to use the entire file or
 558           partition as if it were additional RAM, which can greatly increase
 559           the capability of low-memory machines. This additional memory is
 560           much slower than real RAM, but can be very helpful at preventing your
 561           applications being killed by the Linux out of memory (OOM) killer.
 562           Once you have created swap space using 'mkswap' you need to enable
 563           the swap space using the 'swapon' utility.
 564
 565 config BUSYBOX_CONFIG_FEATURE_MKSWAP_UUID
 566         bool "UUID support"
 567         default BUSYBOX_DEFAULT_FEATURE_MKSWAP_UUID
 568         depends on BUSYBOX_CONFIG_MKSWAP
 569         help
 570           Generate swap spaces with universally unique identifiers.
 571 config BUSYBOX_CONFIG_MORE
 572         bool "more"
 573         default BUSYBOX_DEFAULT_MORE
 574         help
 575           more is a simple utility which allows you to read text one screen
 576           sized page at a time. If you want to read text that is larger than
 577           the screen, and you are using anything faster than a 300 baud modem,
 578           you will probably find this utility very helpful. If you don't have
 579           any need to reading text files, you can leave this disabled.
 580 config BUSYBOX_CONFIG_MOUNT
 581         bool "mount"
 582         default BUSYBOX_DEFAULT_MOUNT
 583         select BUSYBOX_CONFIG_PLATFORM_LINUX
 584         help
 585           All files and filesystems in Unix are arranged into one big directory
 586           tree. The 'mount' utility is used to graft a filesystem onto a
 587           particular part of the tree. A filesystem can either live on a block
 588           device, or it can be accessible over the network, as is the case with
 589           NFS filesystems. Most people using BusyBox will also want to enable
 590           the 'mount' utility.
 591
 592 config BUSYBOX_CONFIG_FEATURE_MOUNT_FAKE
 593         bool "Support option -f"
 594         default BUSYBOX_DEFAULT_FEATURE_MOUNT_FAKE
 595         depends on BUSYBOX_CONFIG_MOUNT
 596         help
 597           Enable support for faking a file system mount.
 598
 599 config BUSYBOX_CONFIG_FEATURE_MOUNT_VERBOSE
 600         bool "Support option -v"
 601         default BUSYBOX_DEFAULT_FEATURE_MOUNT_VERBOSE
 602         depends on BUSYBOX_CONFIG_MOUNT
 603         help
 604           Enable multi-level -v[vv...] verbose messages. Useful if you
 605           debug mount problems and want to see what is exactly passed
 606           to the kernel.
 607
 608 config BUSYBOX_CONFIG_FEATURE_MOUNT_HELPERS
 609         bool "Support mount helpers"
 610         default BUSYBOX_DEFAULT_FEATURE_MOUNT_HELPERS
 611         depends on BUSYBOX_CONFIG_MOUNT
 612         help
 613           Enable mounting of virtual file systems via external helpers.
 614           E.g. "mount obexfs#-b00.11.22.33.44.55 /mnt" will in effect call
 615           "obexfs -b00.11.22.33.44.55 /mnt"
 616           Also "mount -t sometype [-o opts] fs /mnt" will try
 617           "sometype [-o opts] fs /mnt" if simple mount syscall fails.
 618           The idea is to use such virtual filesystems in /etc/fstab.
 619
 620 config BUSYBOX_CONFIG_FEATURE_MOUNT_LABEL
 621         bool "Support specifying devices by label or UUID"
 622         default BUSYBOX_DEFAULT_FEATURE_MOUNT_LABEL
 623         depends on BUSYBOX_CONFIG_MOUNT
 624         select BUSYBOX_CONFIG_VOLUMEID
 625         help
 626           This allows for specifying a device by label or uuid, rather than by
 627           name. This feature utilizes the same functionality as blkid/findfs.
 628           This also enables label or uuid support for swapon.
 629
 630 config BUSYBOX_CONFIG_FEATURE_MOUNT_NFS
 631         bool "Support mounting NFS file systems on Linux < 2.6.23"
 632         default BUSYBOX_DEFAULT_FEATURE_MOUNT_NFS
 633         depends on BUSYBOX_CONFIG_MOUNT
 634         select BUSYBOX_CONFIG_FEATURE_HAVE_RPC
 635         select BUSYBOX_CONFIG_FEATURE_SYSLOG
 636         help
 637           Enable mounting of NFS file systems on Linux kernels prior
 638           to version 2.6.23. Note that in this case mounting of NFS
 639           over IPv6 will not be possible.
 640
 641           Note that this option links in RPC support from libc,
 642           which is rather large (~10 kbytes on uclibc).
 643
 644 config BUSYBOX_CONFIG_FEATURE_MOUNT_CIFS
 645         bool "Support mounting CIFS/SMB file systems"
 646         default BUSYBOX_DEFAULT_FEATURE_MOUNT_CIFS
 647         depends on BUSYBOX_CONFIG_MOUNT
 648         help
 649           Enable support for samba mounts.
 650
 651 config BUSYBOX_CONFIG_FEATURE_MOUNT_FLAGS
 652         depends on BUSYBOX_CONFIG_MOUNT
 653         bool "Support lots of -o flags"
 654         default BUSYBOX_DEFAULT_FEATURE_MOUNT_FLAGS
 655         help
 656           Without this, mount only supports ro/rw/remount. With this, it
 657           supports nosuid, suid, dev, nodev, exec, noexec, sync, async, atime,
 658           noatime, diratime, nodiratime, loud, bind, move, shared, slave,
 659           private, unbindable, rshared, rslave, rprivate, and runbindable.
 660
 661 config BUSYBOX_CONFIG_FEATURE_MOUNT_FSTAB
 662         depends on BUSYBOX_CONFIG_MOUNT
 663         bool "Support /etc/fstab and -a"
 664         default BUSYBOX_DEFAULT_FEATURE_MOUNT_FSTAB
 665         help
 666           Support mount all and looking for files in /etc/fstab.
 667
 668 config BUSYBOX_CONFIG_FEATURE_MOUNT_OTHERTAB
 669         depends on BUSYBOX_CONFIG_FEATURE_MOUNT_FSTAB
 670         bool "Support -T <alt_fstab>"
 671         default BUSYBOX_DEFAULT_FEATURE_MOUNT_OTHERTAB
 672         help
 673           Support mount -T (specifying an alternate fstab)
 674 config BUSYBOX_CONFIG_MOUNTPOINT
 675         bool "mountpoint"
 676         default BUSYBOX_DEFAULT_MOUNTPOINT
 677         help
 678           mountpoint checks if the directory is a mountpoint.
 679 config BUSYBOX_CONFIG_NSENTER
 680         bool "nsenter"
 681         default BUSYBOX_DEFAULT_NSENTER
 682         select BUSYBOX_CONFIG_PLATFORM_LINUX
 683         help
 684           Run program with namespaces of other processes.
 685
 686 config BUSYBOX_CONFIG_FEATURE_NSENTER_LONG_OPTS
 687         bool "Enable long options"
 688         default BUSYBOX_DEFAULT_FEATURE_NSENTER_LONG_OPTS
 689         depends on BUSYBOX_CONFIG_NSENTER && BUSYBOX_CONFIG_LONG_OPTS
 690         help
 691           Support long options for the nsenter applet. This makes
 692           the busybox implementation more compatible with upstream.
 693 config BUSYBOX_CONFIG_PIVOT_ROOT
 694         bool "pivot_root"
 695         default BUSYBOX_DEFAULT_PIVOT_ROOT
 696         select BUSYBOX_CONFIG_PLATFORM_LINUX
 697         help
 698           The pivot_root utility swaps the mount points for the root filesystem
 699           with some other mounted filesystem. This allows you to do all sorts
 700           of wild and crazy things with your Linux system and is far more
 701           powerful than 'chroot'.
 702
 703           Note: This is for initrd in linux 2.4. Under initramfs (introduced
 704           in linux 2.6) use switch_root instead.
 705 config BUSYBOX_CONFIG_RDATE
 706         bool "rdate"
 707         default BUSYBOX_DEFAULT_RDATE
 708         help
 709           The rdate utility allows you to synchronize the date and time of your
 710           system clock with the date and time of a remote networked system using
 711           the RFC868 protocol, which is built into the inetd daemon on most
 712           systems.
 713 config BUSYBOX_CONFIG_RDEV
 714         bool "rdev"
 715         default BUSYBOX_DEFAULT_RDEV
 716         help
 717           Print the device node associated with the filesystem mounted at '/'.
 718 config BUSYBOX_CONFIG_READPROFILE
 719         bool "readprofile"
 720         default BUSYBOX_DEFAULT_READPROFILE
 721         #select PLATFORM_LINUX
 722         help
 723           This allows you to parse /proc/profile for basic profiling.
 724 config BUSYBOX_CONFIG_RENICE
 725         bool "renice"
 726         default BUSYBOX_DEFAULT_RENICE
 727         help
 728           Renice alters the scheduling priority of one or more running
 729           processes.
 730 config BUSYBOX_CONFIG_REV
 731         bool "rev"
 732         default BUSYBOX_DEFAULT_REV
 733         help
 734           Reverse lines of a file or files.
 735 config BUSYBOX_CONFIG_RTCWAKE
 736         bool "rtcwake"
 737         default BUSYBOX_DEFAULT_RTCWAKE
 738         select BUSYBOX_CONFIG_PLATFORM_LINUX
 739         help
 740           Enter a system sleep state until specified wakeup time.
 741 config BUSYBOX_CONFIG_SCRIPT
 742         bool "script"
 743         default BUSYBOX_DEFAULT_SCRIPT
 744         help
 745           The script makes typescript of terminal session.
 746 config BUSYBOX_CONFIG_SCRIPTREPLAY
 747         bool "scriptreplay"
 748         default BUSYBOX_DEFAULT_SCRIPTREPLAY
 749         help
 750           This program replays a typescript, using timing information
 751           given by script -t.
 752 config BUSYBOX_CONFIG_SETARCH
 753         bool "setarch"
 754         default BUSYBOX_DEFAULT_SETARCH
 755         select BUSYBOX_CONFIG_PLATFORM_LINUX
 756         help
 757           The linux32 utility is used to create a 32bit environment for the
 758           specified program (usually a shell). It only makes sense to have
 759           this util on a system that supports both 64bit and 32bit userland
 760           (like amd64/x86, ppc64/ppc, sparc64/sparc, etc...).
 761
 762 config BUSYBOX_CONFIG_LINUX32
 763         bool "linux32"
 764         default BUSYBOX_DEFAULT_LINUX32
 765         select BUSYBOX_CONFIG_PLATFORM_LINUX
 766         help
 767           Alias to "setarch linux32".
 768
 769 config BUSYBOX_CONFIG_LINUX64
 770         bool "linux64"
 771         default BUSYBOX_DEFAULT_LINUX64
 772         select BUSYBOX_CONFIG_PLATFORM_LINUX
 773         help
 774           Alias to "setarch linux64".
 775 config BUSYBOX_CONFIG_SETPRIV
 776         bool "setpriv"
 777         default BUSYBOX_DEFAULT_SETPRIV
 778         select BUSYBOX_CONFIG_PLATFORM_LINUX
 779         select BUSYBOX_CONFIG_LONG_OPTS
 780         help
 781           Run a program with different Linux privilege settings.
 782           Requires kernel >= 3.5
 783 config BUSYBOX_CONFIG_SETSID
 784         bool "setsid"
 785         default BUSYBOX_DEFAULT_SETSID
 786         help
 787           setsid runs a program in a new session
 788 config BUSYBOX_CONFIG_SWAPON
 789         bool "swapon"
 790         default BUSYBOX_DEFAULT_SWAPON
 791         select BUSYBOX_CONFIG_PLATFORM_LINUX
 792         help
 793           This option enables the 'swapon' utility.
 794           Once you have created some swap space using 'mkswap', you also need
 795           to enable your swap space with the 'swapon' utility. The 'swapoff'
 796           utility is used, typically at system shutdown, to disable any swap
 797           space. If you are not using any swap space, you can leave this
 798           option disabled.
 799
 800 config BUSYBOX_CONFIG_FEATURE_SWAPON_DISCARD
 801         bool "Support discard option -d"
 802         default BUSYBOX_DEFAULT_FEATURE_SWAPON_DISCARD
 803         depends on BUSYBOX_CONFIG_SWAPON
 804         help
 805           Enable support for discarding swap area blocks at swapon and/or as
 806           the kernel frees them. This option enables both the -d option on
 807           'swapon' and the 'discard' option for swap entries in /etc/fstab.
 808
 809 config BUSYBOX_CONFIG_FEATURE_SWAPON_PRI
 810         bool "Support priority option -p"
 811         default BUSYBOX_DEFAULT_FEATURE_SWAPON_PRI
 812         depends on BUSYBOX_CONFIG_SWAPON
 813         help
 814           Enable support for setting swap device priority in swapon.
 815
 816 config BUSYBOX_CONFIG_SWAPOFF
 817         bool "swapoff"
 818         default BUSYBOX_DEFAULT_SWAPOFF
 819         select BUSYBOX_CONFIG_PLATFORM_LINUX
 820         help
 821           This option enables the 'swapoff' utility.
 822 config BUSYBOX_CONFIG_SWITCH_ROOT
 823         bool "switch_root"
 824         default BUSYBOX_DEFAULT_SWITCH_ROOT
 825         select BUSYBOX_CONFIG_PLATFORM_LINUX
 826         help
 827           The switch_root utility is used from initramfs to select a new
 828           root device. Under initramfs, you have to use this instead of
 829           pivot_root. (Stop reading here if you don't care why.)
 830
 831           Booting with initramfs extracts a gzipped cpio archive into rootfs
 832           (which is a variant of ramfs/tmpfs). Because rootfs can't be moved
 833           or unmounted*, pivot_root will not work from initramfs. Instead,
 834           switch_root deletes everything out of rootfs (including itself),
 835           does a mount --move that overmounts rootfs with the new root, and
 836           then execs the specified init program.
 837
 838           * Because the Linux kernel uses rootfs internally as the starting
 839           and ending point for searching through the kernel's doubly linked
 840           list of active mount points. That's why.
 841 config BUSYBOX_CONFIG_TASKSET
 842         bool "taskset"
 843         default BUSYBOX_DEFAULT_TASKSET
 844         help
 845           Retrieve or set a processes's CPU affinity.
 846           This requires sched_{g,s}etaffinity support in your libc.
 847
 848 config BUSYBOX_CONFIG_FEATURE_TASKSET_FANCY
 849         bool "Fancy output"
 850         default BUSYBOX_DEFAULT_FEATURE_TASKSET_FANCY
 851         depends on BUSYBOX_CONFIG_TASKSET
 852         help
 853           Needed for machines with more than 32-64 CPUs:
 854           affinity parameter 0xHHHHHHHHHHHHHHHHHHHH can be arbitrarily long
 855           in this case. Otherwise, it is limited to sizeof(long).
 856 config BUSYBOX_CONFIG_UEVENT
 857         bool "uevent"
 858         default BUSYBOX_DEFAULT_UEVENT
 859         select BUSYBOX_CONFIG_PLATFORM_LINUX
 860         help
 861           uevent is a netlink listener for kernel uevent notifications
 862           sent via netlink. It is usually used for dynamic device creation.
 863 config BUSYBOX_CONFIG_UMOUNT
 864         bool "umount"
 865         default BUSYBOX_DEFAULT_UMOUNT
 866         select BUSYBOX_CONFIG_PLATFORM_LINUX
 867         help
 868           When you want to remove a mounted filesystem from its current mount
 869           point, for example when you are shutting down the system, the
 870           'umount' utility is the tool to use. If you enabled the 'mount'
 871           utility, you almost certainly also want to enable 'umount'.
 872
 873 config BUSYBOX_CONFIG_FEATURE_UMOUNT_ALL
 874         bool "Support option -a"
 875         default BUSYBOX_DEFAULT_FEATURE_UMOUNT_ALL
 876         depends on BUSYBOX_CONFIG_UMOUNT
 877         help
 878           Support -a option to unmount all currently mounted filesystems.
 879 config BUSYBOX_CONFIG_UNSHARE
 880         bool "unshare"
 881         default BUSYBOX_DEFAULT_UNSHARE
 882         depends on !BUSYBOX_CONFIG_NOMMU
 883         select BUSYBOX_CONFIG_PLATFORM_LINUX
 884         select BUSYBOX_CONFIG_LONG_OPTS
 885         help
 886           Run program with some namespaces unshared from parent.
 887 config BUSYBOX_CONFIG_WALL
 888         bool "wall"
 889         default BUSYBOX_DEFAULT_WALL
 890         depends on BUSYBOX_CONFIG_FEATURE_UTMP
 891         help
 892           Write a message to all users that are logged in.
 893
 894 comment "Common options for mount/umount"
 895         depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT
 896
 897 config BUSYBOX_CONFIG_FEATURE_MOUNT_LOOP
 898         bool "Support loopback mounts"
 899         default BUSYBOX_DEFAULT_FEATURE_MOUNT_LOOP
 900         depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT
 901         help
 902           Enabling this feature allows automatic mounting of files (containing
 903           filesystem images) via the linux kernel's loopback devices.
 904           The mount command will detect you are trying to mount a file instead
 905           of a block device, and transparently associate the file with a
 906           loopback device. The umount command will also free that loopback
 907           device.
 908
 909           You can still use the 'losetup' utility (to manually associate files
 910           with loop devices) if you need to do something advanced, such as
 911           specify an offset or cryptographic options to the loopback device.
 912           (If you don't want umount to free the loop device, use "umount -D".)
 913
 914 config BUSYBOX_CONFIG_FEATURE_MOUNT_LOOP_CREATE
 915         bool "Create new loopback devices if needed"
 916         default BUSYBOX_DEFAULT_FEATURE_MOUNT_LOOP_CREATE
 917         depends on BUSYBOX_CONFIG_FEATURE_MOUNT_LOOP
 918         help
 919           Linux kernels >= 2.6.24 support unlimited loopback devices. They are
 920           allocated for use when trying to use a loop device. The loop device
 921           must however exist.
 922
 923           This feature lets mount to try to create next /dev/loopN device
 924           if it does not find a free one.
 925
 926 config BUSYBOX_CONFIG_FEATURE_MTAB_SUPPORT
 927         bool "Support old /etc/mtab file"
 928         default BUSYBOX_DEFAULT_FEATURE_MTAB_SUPPORT
 929         depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT
 930         select BUSYBOX_CONFIG_FEATURE_MOUNT_FAKE
 931         help
 932           Historically, Unix systems kept track of the currently mounted
 933           partitions in the file "/etc/mtab". These days, the kernel exports
 934           the list of currently mounted partitions in "/proc/mounts", rendering
 935           the old mtab file obsolete. (In modern systems, /etc/mtab should be
 936           a symlink to /proc/mounts.)
 937
 938           The only reason to have mount maintain an /etc/mtab file itself is if
 939           your stripped-down embedded system does not have a /proc directory.
 940           If you must use this, keep in mind it's inherently brittle (for
 941           example a mount under chroot won't update it), can't handle modern
 942           features like separate per-process filesystem namespaces, requires
 943           that your /etc directory be writable, tends to get easily confused
 944           by --bind or --move mounts, won't update if you rename a directory
 945           that contains a mount point, and so on. (In brief: avoid.)
 946
 947           About the only reason to use this is if you've removed /proc from
 948           your kernel.
 949
 950 source volume_id/Config.in
 951
 952 endmenu