1 // SPDX-License-Identifier: BSD-2-Clause
3 Copyright (c) 2014, Matthias Schiffer <mschiffer@universe-factory.net>
11 Image generation tool for the TP-LINK SafeLoader as seen on
12 TP-LINK Pharos devices (CPE210/220/510/520)
28 #include <arpa/inet.h>
30 #include <sys/types.h>
37 #define ALIGN(x,a) ({ typeof(a) __a = (a); (((x) + __a - 1) & ~(__a - 1)); })
40 #define MAX_PARTITIONS 32
42 /** An image partition table entry */
43 struct image_partition_entry
{
49 /** A flash partition table entry */
50 struct flash_partition_entry
{
56 /** Flash partition names table entry */
57 struct factory_partition_names
{
58 const char *partition_table
;
61 const char *support_list
;
62 const char *file_system
;
63 const char *extra_para
;
66 /** Partition trailing padding definitions
67 * Values 0x00 to 0xff are reserved to indicate the padding value
68 * Values from 0x100 are reserved to indicate other behaviour */
69 enum partition_trail_value
{
72 PART_TRAIL_MAX
= 0xff,
73 PART_TRAIL_NONE
= 0x100
76 /** soft-version value overwrite types
77 * The default (for an uninitialised soft_ver field) is to use the numerical
78 * version number "0.0.0"
81 SOFT_VER_TYPE_NUMERIC
= 0,
82 SOFT_VER_TYPE_TEXT
= 1,
85 /** Firmware layout description */
89 const char *support_list
;
90 enum partition_trail_value part_trail
;
92 enum soft_ver_type type
;
98 uint32_t soft_ver_compat_level
;
99 struct flash_partition_entry partitions
[MAX_PARTITIONS
+1];
100 const char *first_sysupgrade_partition
;
101 const char *last_sysupgrade_partition
;
102 struct factory_partition_names partition_names
;
105 #define SOFT_VER_TEXT(_t) {.type = SOFT_VER_TYPE_TEXT, .text = _t}
106 #define SOFT_VER_NUMERIC(_maj, _min, _patch) { \
107 .type = SOFT_VER_TYPE_NUMERIC, \
108 .num = {_maj, _min, _patch}}
109 #define SOFT_VER_DEFAULT SOFT_VER_NUMERIC(0, 0, 0)
111 struct __attribute__((__packed__
)) meta_header
{
116 /** The content of the soft-version structure */
117 struct __attribute__((__packed__
)) soft_version
{
119 uint8_t version_major
;
120 uint8_t version_minor
;
121 uint8_t version_patch
;
127 uint32_t compat_level
;
131 * Safeloader image type
132 * Safeloader images contain a 0x14 byte preamble with image size (big endian
133 * UINT32) and md5 checksum (16 bytes).
135 * SAFEFLOADER_TYPE_DEFAULT
136 * Standard preamble with size including preamble length, and checksum.
137 * Header of 0x1000 bytes, contents of which are not specified.
138 * Payload starts at offset 0x1014.
140 * SAFELOADER_TYPE_VENDOR
141 * Standard preamble with size including preamble length, and checksum.
142 * Header contains up to 0x1000 bytes of vendor data, starting with a big endian
143 * UINT32 size, followed by that number of bytes containing (text) data.
144 * Padded with 0xFF. Payload starts at offset 0x1014.
146 * SAFELOADER_TYPE_CLOUD
147 * Standard preamble with size including preamble length, and checksum.
148 * Followed by the 'fw-type:Cloud' string and some (unknown) data.
149 * Payload starts at offset 0x1014.
151 * SAFELOADER_TYPE_QNEW
152 * Reversed order preamble, with (apparent) md5 checksum before the image
153 * size. The size does not include the preamble length.
154 * Header starts with 0x3C bytes, starting with the string '?NEW' (format not
155 * understood). Then another 0x1000 bytes follow, with the data payload
156 * starting at 0x1050.
158 enum safeloader_image_type
{
159 SAFELOADER_TYPE_DEFAULT
,
160 SAFELOADER_TYPE_VENDOR
,
161 SAFELOADER_TYPE_CLOUD
,
162 SAFELOADER_TYPE_QNEW
,
165 /* Internal representation of safeloader image data */
166 struct safeloader_image_info
{
167 enum safeloader_image_type type
;
168 size_t payload_offset
;
169 struct flash_partition_entry entries
[MAX_PARTITIONS
];
172 #define SAFELOADER_PREAMBLE_SIZE 0x14
173 #define SAFELOADER_HEADER_SIZE 0x1000
174 #define SAFELOADER_PAYLOAD_OFFSET (SAFELOADER_PREAMBLE_SIZE + SAFELOADER_HEADER_SIZE)
176 #define SAFELOADER_QNEW_HEADER_SIZE 0x3C
177 #define SAFELOADER_QNEW_PAYLOAD_OFFSET \
178 (SAFELOADER_PREAMBLE_SIZE + SAFELOADER_QNEW_HEADER_SIZE + SAFELOADER_HEADER_SIZE)
180 #define SAFELOADER_PAYLOAD_TABLE_SIZE 0x800
182 static const uint8_t jffs2_eof_mark
[4] = {0xde, 0xad, 0xc0, 0xde};
186 Salt for the MD5 hash
188 Fortunately, TP-LINK seems to use the same salt for most devices which use
189 the new image format.
191 static const uint8_t md5_salt
[16] = {
192 0x7a, 0x2b, 0x15, 0xed,
193 0x9b, 0x98, 0x59, 0x6d,
194 0xe5, 0x04, 0xab, 0x44,
195 0xac, 0x2a, 0x9f, 0x4e,
199 /** Firmware layout table */
200 static struct device_info boards
[] = {
201 /** Firmware layout for the CPE210/220 V1 */
204 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
207 "CPE210(TP-LINK|UN|N300-2):1.0\r\n"
208 "CPE210(TP-LINK|UN|N300-2):1.1\r\n"
209 "CPE210(TP-LINK|US|N300-2):1.1\r\n"
210 "CPE210(TP-LINK|EU|N300-2):1.1\r\n"
211 "CPE220(TP-LINK|UN|N300-2):1.1\r\n"
212 "CPE220(TP-LINK|US|N300-2):1.1\r\n"
213 "CPE220(TP-LINK|EU|N300-2):1.1\r\n",
215 .soft_ver
= SOFT_VER_DEFAULT
,
218 {"fs-uboot", 0x00000, 0x20000},
219 {"partition-table", 0x20000, 0x02000},
220 {"default-mac", 0x30000, 0x00020},
221 {"product-info", 0x31100, 0x00100},
222 {"signature", 0x32000, 0x00400},
223 {"firmware", 0x40000, 0x770000},
224 {"soft-version", 0x7b0000, 0x00100},
225 {"support-list", 0x7b1000, 0x00400},
226 {"user-config", 0x7c0000, 0x10000},
227 {"default-config", 0x7d0000, 0x10000},
228 {"log", 0x7e0000, 0x10000},
229 {"radio", 0x7f0000, 0x10000},
233 .first_sysupgrade_partition
= "os-image",
234 .last_sysupgrade_partition
= "support-list",
237 /** Firmware layout for the CPE210 V2 */
240 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n",
243 "CPE210(TP-LINK|EU|N300-2|00000000):2.0\r\n"
244 "CPE210(TP-LINK|EU|N300-2|45550000):2.0\r\n"
245 "CPE210(TP-LINK|EU|N300-2|55530000):2.0\r\n"
246 "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
247 "CPE210(TP-LINK|UN|N300-2|45550000):2.0\r\n"
248 "CPE210(TP-LINK|UN|N300-2|55530000):2.0\r\n"
249 "CPE210(TP-LINK|US|N300-2|55530000):2.0\r\n"
250 "CPE210(TP-LINK|UN|N300-2):2.0\r\n"
251 "CPE210(TP-LINK|EU|N300-2):2.0\r\n"
252 "CPE210(TP-LINK|US|N300-2):2.0\r\n",
254 .soft_ver
= SOFT_VER_DEFAULT
,
257 {"fs-uboot", 0x00000, 0x20000},
258 {"partition-table", 0x20000, 0x02000},
259 {"default-mac", 0x30000, 0x00020},
260 {"product-info", 0x31100, 0x00100},
261 {"device-info", 0x31400, 0x00400},
262 {"signature", 0x32000, 0x00400},
263 {"device-id", 0x33000, 0x00100},
264 {"firmware", 0x40000, 0x770000},
265 {"soft-version", 0x7b0000, 0x00100},
266 {"support-list", 0x7b1000, 0x01000},
267 {"user-config", 0x7c0000, 0x10000},
268 {"default-config", 0x7d0000, 0x10000},
269 {"log", 0x7e0000, 0x10000},
270 {"radio", 0x7f0000, 0x10000},
274 .first_sysupgrade_partition
= "os-image",
275 .last_sysupgrade_partition
= "support-list",
278 /** Firmware layout for the CPE210 V3 */
281 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n",
284 "CPE210(TP-LINK|EU|N300-2|45550000):3.0\r\n"
285 "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n"
286 "CPE210(TP-LINK|US|N300-2|55530000):3.0\r\n"
287 "CPE210(TP-LINK|UN|N300-2):3.0\r\n"
288 "CPE210(TP-LINK|EU|N300-2):3.0\r\n"
289 "CPE210(TP-LINK|EU|N300-2|45550000):3.1\r\n"
290 "CPE210(TP-LINK|UN|N300-2|00000000):3.1\r\n"
291 "CPE210(TP-LINK|US|N300-2|55530000):3.1\r\n"
292 "CPE210(TP-LINK|EU|N300-2|45550000):3.20\r\n"
293 "CPE210(TP-LINK|UN|N300-2|00000000):3.20\r\n"
294 "CPE210(TP-LINK|US|N300-2|55530000):3.20\r\n",
296 .soft_ver
= SOFT_VER_DEFAULT
,
299 {"fs-uboot", 0x00000, 0x20000},
300 {"partition-table", 0x20000, 0x01000},
301 {"default-mac", 0x30000, 0x00020},
302 {"product-info", 0x31100, 0x00100},
303 {"device-info", 0x31400, 0x00400},
304 {"signature", 0x32000, 0x00400},
305 {"device-id", 0x33000, 0x00100},
306 {"firmware", 0x40000, 0x770000},
307 {"soft-version", 0x7b0000, 0x00100},
308 {"support-list", 0x7b1000, 0x01000},
309 {"user-config", 0x7c0000, 0x10000},
310 {"default-config", 0x7d0000, 0x10000},
311 {"log", 0x7e0000, 0x10000},
312 {"radio", 0x7f0000, 0x10000},
316 .first_sysupgrade_partition
= "os-image",
317 .last_sysupgrade_partition
= "support-list",
320 /** Firmware layout for the CPE220 V2 */
323 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
326 "CPE220(TP-LINK|EU|N300-2|00000000):2.0\r\n"
327 "CPE220(TP-LINK|EU|N300-2|45550000):2.0\r\n"
328 "CPE220(TP-LINK|EU|N300-2|55530000):2.0\r\n"
329 "CPE220(TP-LINK|UN|N300-2|00000000):2.0\r\n"
330 "CPE220(TP-LINK|UN|N300-2|45550000):2.0\r\n"
331 "CPE220(TP-LINK|UN|N300-2|55530000):2.0\r\n"
332 "CPE220(TP-LINK|US|N300-2|55530000):2.0\r\n"
333 "CPE220(TP-LINK|UN|N300-2):2.0\r\n"
334 "CPE220(TP-LINK|EU|N300-2):2.0\r\n"
335 "CPE220(TP-LINK|US|N300-2):2.0\r\n",
337 .soft_ver
= SOFT_VER_DEFAULT
,
340 {"fs-uboot", 0x00000, 0x20000},
341 {"partition-table", 0x20000, 0x02000},
342 {"default-mac", 0x30000, 0x00020},
343 {"product-info", 0x31100, 0x00100},
344 {"signature", 0x32000, 0x00400},
345 {"firmware", 0x40000, 0x770000},
346 {"soft-version", 0x7b0000, 0x00100},
347 {"support-list", 0x7b1000, 0x00400},
348 {"user-config", 0x7c0000, 0x10000},
349 {"default-config", 0x7d0000, 0x10000},
350 {"log", 0x7e0000, 0x10000},
351 {"radio", 0x7f0000, 0x10000},
355 .first_sysupgrade_partition
= "os-image",
356 .last_sysupgrade_partition
= "support-list",
359 /** Firmware layout for the CPE220 V3 */
362 .vendor
= "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n",
365 "CPE220(TP-LINK|EU|N300-2|00000000):3.0\r\n"
366 "CPE220(TP-LINK|EU|N300-2|45550000):3.0\r\n"
367 "CPE220(TP-LINK|EU|N300-2|55530000):3.0\r\n"
368 "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n"
369 "CPE220(TP-LINK|UN|N300-2|45550000):3.0\r\n"
370 "CPE220(TP-LINK|UN|N300-2|55530000):3.0\r\n"
371 "CPE220(TP-LINK|US|N300-2|55530000):3.0\r\n"
372 "CPE220(TP-LINK|UN|N300-2):3.0\r\n"
373 "CPE220(TP-LINK|EU|N300-2):3.0\r\n"
374 "CPE220(TP-LINK|US|N300-2):3.0\r\n",
376 .soft_ver
= SOFT_VER_DEFAULT
,
379 {"fs-uboot", 0x00000, 0x20000},
380 {"partition-table", 0x20000, 0x02000},
381 {"default-mac", 0x30000, 0x00020},
382 {"product-info", 0x31100, 0x00100},
383 {"device-info", 0x31400, 0x00400},
384 {"signature", 0x32000, 0x00400},
385 {"device-id", 0x33000, 0x00100},
386 {"firmware", 0x40000, 0x770000},
387 {"soft-version", 0x7b0000, 0x00100},
388 {"support-list", 0x7b1000, 0x01000},
389 {"user-config", 0x7c0000, 0x10000},
390 {"default-config", 0x7d0000, 0x10000},
391 {"log", 0x7e0000, 0x10000},
392 {"radio", 0x7f0000, 0x10000},
396 .first_sysupgrade_partition
= "os-image",
397 .last_sysupgrade_partition
= "support-list",
400 /** Firmware layout for the CPE510/520 V1 */
403 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
406 "CPE510(TP-LINK|UN|N300-5):1.0\r\n"
407 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
408 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
409 "CPE510(TP-LINK|US|N300-5):1.1\r\n"
410 "CPE510(TP-LINK|EU|N300-5):1.1\r\n"
411 "CPE520(TP-LINK|UN|N300-5):1.1\r\n"
412 "CPE520(TP-LINK|US|N300-5):1.1\r\n"
413 "CPE520(TP-LINK|EU|N300-5):1.1\r\n",
415 .soft_ver
= SOFT_VER_DEFAULT
,
418 {"fs-uboot", 0x00000, 0x20000},
419 {"partition-table", 0x20000, 0x02000},
420 {"default-mac", 0x30000, 0x00020},
421 {"product-info", 0x31100, 0x00100},
422 {"signature", 0x32000, 0x00400},
423 {"firmware", 0x40000, 0x770000},
424 {"soft-version", 0x7b0000, 0x00100},
425 {"support-list", 0x7b1000, 0x00400},
426 {"user-config", 0x7c0000, 0x10000},
427 {"default-config", 0x7d0000, 0x10000},
428 {"log", 0x7e0000, 0x10000},
429 {"radio", 0x7f0000, 0x10000},
433 .first_sysupgrade_partition
= "os-image",
434 .last_sysupgrade_partition
= "support-list",
437 /** Firmware layout for the CPE510 V2 */
440 .vendor
= "CPE510(TP-LINK|UN|N300-5):2.0\r\n",
443 "CPE510(TP-LINK|EU|N300-5|00000000):2.0\r\n"
444 "CPE510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
445 "CPE510(TP-LINK|EU|N300-5|55530000):2.0\r\n"
446 "CPE510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
447 "CPE510(TP-LINK|UN|N300-5|45550000):2.0\r\n"
448 "CPE510(TP-LINK|UN|N300-5|55530000):2.0\r\n"
449 "CPE510(TP-LINK|US|N300-5|00000000):2.0\r\n"
450 "CPE510(TP-LINK|US|N300-5|45550000):2.0\r\n"
451 "CPE510(TP-LINK|US|N300-5|55530000):2.0\r\n"
452 "CPE510(TP-LINK|UN|N300-5):2.0\r\n"
453 "CPE510(TP-LINK|EU|N300-5):2.0\r\n"
454 "CPE510(TP-LINK|US|N300-5):2.0\r\n",
456 .soft_ver
= SOFT_VER_DEFAULT
,
459 {"fs-uboot", 0x00000, 0x20000},
460 {"partition-table", 0x20000, 0x02000},
461 {"default-mac", 0x30000, 0x00020},
462 {"product-info", 0x31100, 0x00100},
463 {"signature", 0x32000, 0x00400},
464 {"firmware", 0x40000, 0x770000},
465 {"soft-version", 0x7b0000, 0x00100},
466 {"support-list", 0x7b1000, 0x00400},
467 {"user-config", 0x7c0000, 0x10000},
468 {"default-config", 0x7d0000, 0x10000},
469 {"log", 0x7e0000, 0x10000},
470 {"radio", 0x7f0000, 0x10000},
474 .first_sysupgrade_partition
= "os-image",
475 .last_sysupgrade_partition
= "support-list",
478 /** Firmware layout for the CPE510 V3 */
481 .vendor
= "CPE510(TP-LINK|UN|N300-5):3.0\r\n",
484 "CPE510(TP-LINK|EU|N300-5|00000000):3.0\r\n"
485 "CPE510(TP-LINK|EU|N300-5|45550000):3.0\r\n"
486 "CPE510(TP-LINK|EU|N300-5|55530000):3.0\r\n"
487 "CPE510(TP-LINK|UN|N300-5|00000000):3.0\r\n"
488 "CPE510(TP-LINK|UN|N300-5|45550000):3.0\r\n"
489 "CPE510(TP-LINK|UN|N300-5|55530000):3.0\r\n"
490 "CPE510(TP-LINK|US|N300-5|00000000):3.0\r\n"
491 "CPE510(TP-LINK|US|N300-5|45550000):3.0\r\n"
492 "CPE510(TP-LINK|US|N300-5|55530000):3.0\r\n"
493 "CPE510(TP-LINK|UN|N300-5):3.0\r\n"
494 "CPE510(TP-LINK|EU|N300-5):3.0\r\n"
495 "CPE510(TP-LINK|US|N300-5):3.0\r\n"
496 "CPE510(TP-LINK|UN|N300-5|00000000):3.20\r\n"
497 "CPE510(TP-LINK|US|N300-5|55530000):3.20\r\n"
498 "CPE510(TP-LINK|EU|N300-5|45550000):3.20\r\n",
500 .soft_ver
= SOFT_VER_DEFAULT
,
503 {"fs-uboot", 0x00000, 0x20000},
504 {"partition-table", 0x20000, 0x02000},
505 {"default-mac", 0x30000, 0x00020},
506 {"product-info", 0x31100, 0x00100},
507 {"signature", 0x32000, 0x00400},
508 {"firmware", 0x40000, 0x770000},
509 {"soft-version", 0x7b0000, 0x00100},
510 {"support-list", 0x7b1000, 0x00400},
511 {"user-config", 0x7c0000, 0x10000},
512 {"default-config", 0x7d0000, 0x10000},
513 {"log", 0x7e0000, 0x10000},
514 {"radio", 0x7f0000, 0x10000},
518 .first_sysupgrade_partition
= "os-image",
519 .last_sysupgrade_partition
= "support-list",
522 /** Firmware layout for the CPE605V1 */
525 .vendor
= "CPE605(TP-LINK|UN|N150-5):1.0\r\n",
528 "CPE605(TP-LINK|UN|N150-5|00000000):1.0\r\n"
529 "CPE605(TP-LINK|EU|N150-5|45550000):1.0\r\n"
530 "CPE605(TP-LINK|US|N150-5|55530000):1.0\r\n",
532 .soft_ver
= SOFT_VER_DEFAULT
,
535 {"fs-uboot", 0x00000, 0x20000},
536 {"partition-table", 0x20000, 0x02000},
537 {"default-mac", 0x30000, 0x00020},
538 {"serial-number", 0x30100, 0x00020},
539 {"product-info", 0x31100, 0x00100},
540 {"device-info", 0x31400, 0x00400},
541 {"signature", 0x32000, 0x00400},
542 {"device-id", 0x33000, 0x00100},
543 {"firmware", 0x40000, 0x770000},
544 {"soft-version", 0x7b0000, 0x00100},
545 {"support-list", 0x7b1000, 0x01000},
546 {"user-config", 0x7c0000, 0x10000},
547 {"default-config", 0x7d0000, 0x10000},
548 {"log", 0x7e0000, 0x10000},
549 {"radio", 0x7f0000, 0x10000},
553 .first_sysupgrade_partition
= "os-image",
554 .last_sysupgrade_partition
= "support-list",
557 /** Firmware layout for the CPE610V1 */
560 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n",
563 "CPE610(TP-LINK|EU|N300-5|00000000):1.0\r\n"
564 "CPE610(TP-LINK|EU|N300-5|45550000):1.0\r\n"
565 "CPE610(TP-LINK|EU|N300-5|55530000):1.0\r\n"
566 "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n"
567 "CPE610(TP-LINK|UN|N300-5|45550000):1.0\r\n"
568 "CPE610(TP-LINK|UN|N300-5|55530000):1.0\r\n"
569 "CPE610(TP-LINK|US|N300-5|55530000):1.0\r\n"
570 "CPE610(TP-LINK|UN|N300-5):1.0\r\n"
571 "CPE610(TP-LINK|EU|N300-5):1.0\r\n"
572 "CPE610(TP-LINK|US|N300-5):1.0\r\n",
574 .soft_ver
= SOFT_VER_DEFAULT
,
577 {"fs-uboot", 0x00000, 0x20000},
578 {"partition-table", 0x20000, 0x02000},
579 {"default-mac", 0x30000, 0x00020},
580 {"product-info", 0x31100, 0x00100},
581 {"signature", 0x32000, 0x00400},
582 {"firmware", 0x40000, 0x770000},
583 {"soft-version", 0x7b0000, 0x00100},
584 {"support-list", 0x7b1000, 0x00400},
585 {"user-config", 0x7c0000, 0x10000},
586 {"default-config", 0x7d0000, 0x10000},
587 {"log", 0x7e0000, 0x10000},
588 {"radio", 0x7f0000, 0x10000},
592 .first_sysupgrade_partition
= "os-image",
593 .last_sysupgrade_partition
= "support-list",
596 /** Firmware layout for the CPE610V2 */
599 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n",
602 "CPE610(TP-LINK|EU|N300-5|00000000):2.0\r\n"
603 "CPE610(TP-LINK|EU|N300-5|45550000):2.0\r\n"
604 "CPE610(TP-LINK|EU|N300-5|55530000):2.0\r\n"
605 "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n"
606 "CPE610(TP-LINK|UN|N300-5|45550000):2.0\r\n"
607 "CPE610(TP-LINK|UN|N300-5|55530000):2.0\r\n"
608 "CPE610(TP-LINK|US|N300-5|55530000):2.0\r\n"
609 "CPE610(TP-LINK|UN|N300-5):2.0\r\n"
610 "CPE610(TP-LINK|EU|N300-5):2.0\r\n"
611 "CPE610(TP-LINK|US|N300-5):2.0\r\n",
613 .soft_ver
= SOFT_VER_DEFAULT
,
616 {"fs-uboot", 0x00000, 0x20000},
617 {"partition-table", 0x20000, 0x02000},
618 {"default-mac", 0x30000, 0x00020},
619 {"product-info", 0x31100, 0x00100},
620 {"signature", 0x32000, 0x00400},
621 {"firmware", 0x40000, 0x770000},
622 {"soft-version", 0x7b0000, 0x00100},
623 {"support-list", 0x7b1000, 0x00400},
624 {"user-config", 0x7c0000, 0x10000},
625 {"default-config", 0x7d0000, 0x10000},
626 {"log", 0x7e0000, 0x10000},
627 {"radio", 0x7f0000, 0x10000},
631 .first_sysupgrade_partition
= "os-image",
632 .last_sysupgrade_partition
= "support-list",
634 /** Firmware layout for the CPE710 V1 */
637 .vendor
= "CPE710(TP-LINK|UN|AC866-5|00000000):1.0\r\n",
640 "CPE710(TP-LINK|UN|AC866-5|00000000):1.0\r\n"
641 "CPE710(TP-LINK|EU|AC866-5|45550000):1.0\r\n"
642 "CPE710(TP-LINK|US|AC866-5|55530000):1.0\r\n"
643 "CPE710(TP-LINK|UN|AC866-5):1.0\r\n"
644 "CPE710(TP-LINK|EU|AC866-5):1.0\r\n"
645 "CPE710(TP-LINK|US|AC866-5):1.0\r\n",
647 .soft_ver
= SOFT_VER_DEFAULT
,
650 {"fs-uboot", 0x00000, 0x50000},
651 {"partition-table", 0x50000, 0x02000},
652 {"default-mac", 0x60000, 0x00020},
653 {"serial-number", 0x60100, 0x00020},
654 {"product-info", 0x61100, 0x00100},
655 {"device-info", 0x61400, 0x00400},
656 {"signature", 0x62000, 0x00400},
657 {"device-id", 0x63000, 0x00100},
658 {"firmware", 0x70000, 0xf40000},
659 {"soft-version", 0xfb0000, 0x00100},
660 {"support-list", 0xfb1000, 0x01000},
661 {"user-config", 0xfc0000, 0x10000},
662 {"default-config", 0xfd0000, 0x10000},
663 {"log", 0xfe0000, 0x10000},
664 {"radio", 0xff0000, 0x10000},
668 .first_sysupgrade_partition
= "os-image",
669 .last_sysupgrade_partition
= "support-list",
674 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
677 "WBS210(TP-LINK|UN|N300-2):1.20\r\n"
678 "WBS210(TP-LINK|US|N300-2):1.20\r\n"
679 "WBS210(TP-LINK|EU|N300-2):1.20\r\n",
681 .soft_ver
= SOFT_VER_DEFAULT
,
684 {"fs-uboot", 0x00000, 0x20000},
685 {"partition-table", 0x20000, 0x02000},
686 {"default-mac", 0x30000, 0x00020},
687 {"product-info", 0x31100, 0x00100},
688 {"signature", 0x32000, 0x00400},
689 {"firmware", 0x40000, 0x770000},
690 {"soft-version", 0x7b0000, 0x00100},
691 {"support-list", 0x7b1000, 0x00400},
692 {"user-config", 0x7c0000, 0x10000},
693 {"default-config", 0x7d0000, 0x10000},
694 {"log", 0x7e0000, 0x10000},
695 {"radio", 0x7f0000, 0x10000},
699 .first_sysupgrade_partition
= "os-image",
700 .last_sysupgrade_partition
= "support-list",
705 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
708 "WBS210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
709 "WBS210(TP-LINK|US|N300-2|55530000):2.0\r\n"
710 "WBS210(TP-LINK|EU|N300-2|45550000):2.0\r\n",
712 .soft_ver
= SOFT_VER_DEFAULT
,
715 {"fs-uboot", 0x00000, 0x20000},
716 {"partition-table", 0x20000, 0x02000},
717 {"default-mac", 0x30000, 0x00020},
718 {"product-info", 0x31100, 0x00100},
719 {"signature", 0x32000, 0x00400},
720 {"firmware", 0x40000, 0x770000},
721 {"soft-version", 0x7b0000, 0x00100},
722 {"support-list", 0x7b1000, 0x00400},
723 {"user-config", 0x7c0000, 0x10000},
724 {"default-config", 0x7d0000, 0x10000},
725 {"log", 0x7e0000, 0x10000},
726 {"radio", 0x7f0000, 0x10000},
730 .first_sysupgrade_partition
= "os-image",
731 .last_sysupgrade_partition
= "support-list",
736 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
739 "WBS510(TP-LINK|UN|N300-5):1.20\r\n"
740 "WBS510(TP-LINK|US|N300-5):1.20\r\n"
741 "WBS510(TP-LINK|EU|N300-5):1.20\r\n"
742 "WBS510(TP-LINK|CA|N300-5):1.20\r\n",
744 .soft_ver
= SOFT_VER_DEFAULT
,
747 {"fs-uboot", 0x00000, 0x20000},
748 {"partition-table", 0x20000, 0x02000},
749 {"default-mac", 0x30000, 0x00020},
750 {"product-info", 0x31100, 0x00100},
751 {"signature", 0x32000, 0x00400},
752 {"firmware", 0x40000, 0x770000},
753 {"soft-version", 0x7b0000, 0x00100},
754 {"support-list", 0x7b1000, 0x00400},
755 {"user-config", 0x7c0000, 0x10000},
756 {"default-config", 0x7d0000, 0x10000},
757 {"log", 0x7e0000, 0x10000},
758 {"radio", 0x7f0000, 0x10000},
762 .first_sysupgrade_partition
= "os-image",
763 .last_sysupgrade_partition
= "support-list",
768 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
771 "WBS510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
772 "WBS510(TP-LINK|US|N300-5|55530000):2.0\r\n"
773 "WBS510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
774 "WBS510(TP-LINK|CA|N300-5|43410000):2.0\r\n",
776 .soft_ver
= SOFT_VER_DEFAULT
,
779 {"fs-uboot", 0x00000, 0x20000},
780 {"partition-table", 0x20000, 0x02000},
781 {"default-mac", 0x30000, 0x00020},
782 {"product-info", 0x31100, 0x00100},
783 {"signature", 0x32000, 0x00400},
784 {"firmware", 0x40000, 0x770000},
785 {"soft-version", 0x7b0000, 0x00100},
786 {"support-list", 0x7b1000, 0x00400},
787 {"user-config", 0x7c0000, 0x10000},
788 {"default-config", 0x7d0000, 0x10000},
789 {"log", 0x7e0000, 0x10000},
790 {"radio", 0x7f0000, 0x10000},
794 .first_sysupgrade_partition
= "os-image",
795 .last_sysupgrade_partition
= "support-list",
798 /** Firmware layout for the AD7200 */
804 "{product_name:AD7200,product_ver:1.0.0,special_id:00000000}\r\n",
806 .soft_ver
= SOFT_VER_DEFAULT
,
809 {"SBL1", 0x00000, 0x20000},
810 {"MIBIB", 0x20000, 0x20000},
811 {"SBL2", 0x40000, 0x20000},
812 {"SBL3", 0x60000, 0x30000},
813 {"DDRCONFIG", 0x90000, 0x10000},
814 {"SSD", 0xa0000, 0x10000},
815 {"TZ", 0xb0000, 0x30000},
816 {"RPM", 0xe0000, 0x20000},
817 {"fs-uboot", 0x100000, 0x70000},
818 {"uboot-env", 0x170000, 0x40000},
819 {"radio", 0x1b0000, 0x40000},
820 {"os-image", 0x1f0000, 0x400000},
821 {"file-system", 0x5f0000, 0x1900000},
822 {"default-mac", 0x1ef0000, 0x00200},
823 {"pin", 0x1ef0200, 0x00200},
824 {"device-id", 0x1ef0400, 0x00200},
825 {"product-info", 0x1ef0600, 0x0fa00},
826 {"partition-table", 0x1f00000, 0x10000},
827 {"soft-version", 0x1f10000, 0x10000},
828 {"support-list", 0x1f20000, 0x10000},
829 {"profile", 0x1f30000, 0x10000},
830 {"default-config", 0x1f40000, 0x10000},
831 {"user-config", 0x1f50000, 0x40000},
832 {"qos-db", 0x1f90000, 0x40000},
833 {"usb-config", 0x1fd0000, 0x10000},
834 {"log", 0x1fe0000, 0x20000},
838 .first_sysupgrade_partition
= "os-image",
839 .last_sysupgrade_partition
= "file-system"
842 /** Firmware layout for the C2600 */
848 "{product_name:Archer C2600,product_ver:1.0.0,special_id:00000000}\r\n",
850 .soft_ver
= SOFT_VER_DEFAULT
,
853 We use a bigger os-image partition than the stock images (and thus
854 smaller file-system), as our kernel doesn't fit in the stock firmware's
855 2 MB os-image since kernel 4.14.
858 {"SBL1", 0x00000, 0x20000},
859 {"MIBIB", 0x20000, 0x20000},
860 {"SBL2", 0x40000, 0x20000},
861 {"SBL3", 0x60000, 0x30000},
862 {"DDRCONFIG", 0x90000, 0x10000},
863 {"SSD", 0xa0000, 0x10000},
864 {"TZ", 0xb0000, 0x30000},
865 {"RPM", 0xe0000, 0x20000},
866 {"fs-uboot", 0x100000, 0x70000},
867 {"uboot-env", 0x170000, 0x40000},
868 {"radio", 0x1b0000, 0x40000},
869 {"os-image", 0x1f0000, 0x400000}, /* Stock: base 0x1f0000 size 0x200000 */
870 {"file-system", 0x5f0000, 0x1900000}, /* Stock: base 0x3f0000 size 0x1b00000 */
871 {"default-mac", 0x1ef0000, 0x00200},
872 {"pin", 0x1ef0200, 0x00200},
873 {"product-info", 0x1ef0400, 0x0fc00},
874 {"partition-table", 0x1f00000, 0x10000},
875 {"soft-version", 0x1f10000, 0x10000},
876 {"support-list", 0x1f20000, 0x10000},
877 {"profile", 0x1f30000, 0x10000},
878 {"default-config", 0x1f40000, 0x10000},
879 {"user-config", 0x1f50000, 0x40000},
880 {"qos-db", 0x1f90000, 0x40000},
881 {"usb-config", 0x1fd0000, 0x10000},
882 {"log", 0x1fe0000, 0x20000},
886 .first_sysupgrade_partition
= "os-image",
887 .last_sysupgrade_partition
= "file-system"
890 /** Firmware layout for the A7-V5 */
892 .id
= "ARCHER-A7-V5",
895 "{product_name:Archer A7,product_ver:5.0.0,special_id:45550000}\n"
896 "{product_name:Archer A7,product_ver:5.0.0,special_id:55530000}\n"
897 "{product_name:Archer A7,product_ver:5.0.0,special_id:43410000}\n"
898 "{product_name:Archer A7,product_ver:5.0.0,special_id:4A500000}\n"
899 "{product_name:Archer A7,product_ver:5.0.0,special_id:54570000}\n"
900 "{product_name:Archer A7,product_ver:5.0.0,special_id:52550000}\n",
902 .soft_ver
= SOFT_VER_TEXT("soft_ver:7.0.0\n"),
904 /* We're using a dynamic kernel/rootfs split here */
906 {"factory-boot", 0x00000, 0x20000},
907 {"fs-uboot", 0x20000, 0x20000},
908 {"firmware", 0x40000, 0xec0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
909 /* Stock: name file-system base 0x160000 size 0xda0000 */
910 {"default-mac", 0xf40000, 0x00200},
911 {"pin", 0xf40200, 0x00200},
912 {"device-id", 0xf40400, 0x00100},
913 {"product-info", 0xf40500, 0x0fb00},
914 {"soft-version", 0xf50000, 0x00100},
915 {"extra-para", 0xf51000, 0x01000},
916 {"support-list", 0xf52000, 0x0a000},
917 {"profile", 0xf5c000, 0x04000},
918 {"default-config", 0xf60000, 0x10000},
919 {"user-config", 0xf70000, 0x40000},
920 {"certificate", 0xfb0000, 0x10000},
921 {"partition-table", 0xfc0000, 0x10000},
922 {"log", 0xfd0000, 0x20000},
923 {"radio", 0xff0000, 0x10000},
927 .first_sysupgrade_partition
= "os-image",
928 .last_sysupgrade_partition
= "file-system",
931 /** Firmware layout for the Archer A9 v6 */
933 .id
= "ARCHER-A9-V6",
936 "{product_name:Archer A9,product_ver:6.0,special_id:55530000}\n"
937 "{product_name:Archer A9,product_ver:6.0,special_id:45550000}\n"
938 "{product_name:Archer A9,product_ver:6.0,special_id:52550000}\n"
939 "{product_name:Archer A9,product_ver:6.0,special_id:4A500000}\n"
940 "{product_name:Archer C90,product_ver:6.0,special_id:55530000}\n",
942 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.1.0\n"),
944 /* We're using a dynamic kernel/rootfs split here */
946 {"factory-boot", 0x00000, 0x20000},
947 {"fs-uboot", 0x20000, 0x20000},
948 {"partition-table", 0x40000, 0x10000},
949 {"radio", 0x50000, 0x10000},
950 {"default-mac", 0x60000, 0x00200},
951 {"pin", 0x60200, 0x00200},
952 {"device-id", 0x60400, 0x00100},
953 {"product-info", 0x60500, 0x0fb00},
954 {"soft-version", 0x70000, 0x01000},
955 {"extra-para", 0x71000, 0x01000},
956 {"support-list", 0x72000, 0x0a000},
957 {"profile", 0x7c000, 0x04000},
958 {"user-config", 0x80000, 0x10000},
959 {"ap-config", 0x90000, 0x10000},
960 {"apdef-config", 0xa0000, 0x10000},
961 {"router-config", 0xb0000, 0x10000},
962 {"firmware", 0xc0000, 0xf00000}, /* Stock: name os-image base 0xc0000 size 0x120000 */
963 /* Stock: name file-system base 0x1e0000 size 0xde0000 */
964 {"log", 0xfc0000, 0x20000},
965 {"certificate", 0xfe0000, 0x10000},
966 {"default-config", 0xff0000, 0x10000},
970 .first_sysupgrade_partition
= "os-image",
971 .last_sysupgrade_partition
= "file-system",
974 /** Firmware layout for the Archer AX23 v1 */
976 .id
= "ARCHER-AX23-V1",
980 "{product_name:Archer AX23,product_ver:1.0,special_id:45550000}\n"
981 "{product_name:Archer AX23,product_ver:1.0,special_id:4A500000}\n"
982 "{product_name:Archer AX23,product_ver:1.0,special_id:4B520000}\n"
983 "{product_name:Archer AX23,product_ver:1.0,special_id:52550000}\n"
984 "{product_name:Archer AX23,product_ver:1.0.0,special_id:43410000}\n"
985 "{product_name:Archer AX23,product_ver:1.0.0,special_id:54570000}\n"
986 "{product_name:Archer AX23,product_ver:1.0.0,special_id:55530000}\n"
987 "{product_name:Archer AX23,product_ver:1.20,special_id:45550000}\n"
988 "{product_name:Archer AX23,product_ver:1.20,special_id:4A500000}\n"
989 "{product_name:Archer AX23,product_ver:1.20,special_id:52550000}\n"
990 "{product_name:Archer AX23,product_ver:1.20,special_id:55530000}\n"
991 "{product_name:Archer AX1800,product_ver:1.20,special_id:45550000}\n"
992 "{product_name:Archer AX1800,product_ver:1.20,special_id:52550000}\n",
994 .soft_ver
= SOFT_VER_TEXT("soft_ver:3.0.3\n"),
997 {"fs-uboot", 0x00000, 0x40000},
998 {"firmware", 0x40000, 0xf60000},
999 {"default-mac", 0xfa0000, 0x00200},
1000 {"pin", 0xfa0200, 0x00100},
1001 {"device-id", 0xfa0300, 0x00100},
1002 {"product-info", 0xfa0400, 0x0fc00},
1003 {"default-config", 0xfb0000, 0x08000},
1004 {"ap-def-config", 0xfb8000, 0x08000},
1005 {"user-config", 0xfc0000, 0x0a000},
1006 {"ag-config", 0xfca000, 0x04000},
1007 {"certificate", 0xfce000, 0x02000},
1008 {"ap-config", 0xfd0000, 0x06000},
1009 {"router-config", 0xfd6000, 0x06000},
1010 {"favicon", 0xfdc000, 0x02000},
1011 {"logo", 0xfde000, 0x02000},
1012 {"partition-table", 0xfe0000, 0x00800},
1013 {"soft-version", 0xfe0800, 0x00100},
1014 {"support-list", 0xfe0900, 0x00400},
1015 {"profile", 0xfe0d00, 0x03000},
1016 {"extra-para", 0xfe3d00, 0x00100},
1017 {"radio", 0xff0000, 0x10000},
1020 .first_sysupgrade_partition
= "os-image",
1021 .last_sysupgrade_partition
= "file-system",
1023 /** Firmware layout for the C2v3 */
1025 .id
= "ARCHER-C2-V3",
1028 "{product_name:ArcherC2,product_ver:3.0.0,special_id:00000000}\n"
1029 "{product_name:ArcherC2,product_ver:3.0.0,special_id:55530000}\n"
1030 "{product_name:ArcherC2,product_ver:3.0.0,special_id:45550000}\n",
1032 .soft_ver
= SOFT_VER_TEXT("soft_ver:3.0.1\n"),
1034 /** We're using a dynamic kernel/rootfs split here */
1037 {"factory-boot", 0x00000, 0x20000},
1038 {"fs-uboot", 0x20000, 0x10000},
1039 {"firmware", 0x30000, 0x7a0000},
1040 {"user-config", 0x7d0000, 0x04000},
1041 {"default-mac", 0x7e0000, 0x00100},
1042 {"device-id", 0x7e0100, 0x00100},
1043 {"extra-para", 0x7e0200, 0x00100},
1044 {"pin", 0x7e0300, 0x00100},
1045 {"support-list", 0x7e0400, 0x00400},
1046 {"soft-version", 0x7e0800, 0x00400},
1047 {"product-info", 0x7e0c00, 0x01400},
1048 {"partition-table", 0x7e2000, 0x01000},
1049 {"profile", 0x7e3000, 0x01000},
1050 {"default-config", 0x7e4000, 0x04000},
1051 {"merge-config", 0x7ec000, 0x02000},
1052 {"qos-db", 0x7ee000, 0x02000},
1053 {"radio", 0x7f0000, 0x10000},
1057 .first_sysupgrade_partition
= "os-image",
1058 .last_sysupgrade_partition
= "file-system",
1061 /** Firmware layout for the C25v1 */
1063 .id
= "ARCHER-C25-V1",
1066 "{product_name:ArcherC25,product_ver:1.0.0,special_id:00000000}\n"
1067 "{product_name:ArcherC25,product_ver:1.0.0,special_id:55530000}\n"
1068 "{product_name:ArcherC25,product_ver:1.0.0,special_id:45550000}\n",
1070 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.0.0\n"),
1072 /* We're using a dynamic kernel/rootfs split here */
1074 {"factory-boot", 0x00000, 0x20000},
1075 {"fs-uboot", 0x20000, 0x10000},
1076 {"firmware", 0x30000, 0x7a0000}, /* Stock: name os-image base 0x30000 size 0x100000 */
1077 /* Stock: name file-system base 0x130000 size 0x6a0000 */
1078 {"user-config", 0x7d0000, 0x04000},
1079 {"default-mac", 0x7e0000, 0x00100},
1080 {"device-id", 0x7e0100, 0x00100},
1081 {"extra-para", 0x7e0200, 0x00100},
1082 {"pin", 0x7e0300, 0x00100},
1083 {"support-list", 0x7e0400, 0x00400},
1084 {"soft-version", 0x7e0800, 0x00400},
1085 {"product-info", 0x7e0c00, 0x01400},
1086 {"partition-table", 0x7e2000, 0x01000},
1087 {"profile", 0x7e3000, 0x01000},
1088 {"default-config", 0x7e4000, 0x04000},
1089 {"merge-config", 0x7ec000, 0x02000},
1090 {"qos-db", 0x7ee000, 0x02000},
1091 {"radio", 0x7f0000, 0x10000},
1095 .first_sysupgrade_partition
= "os-image",
1096 .last_sysupgrade_partition
= "file-system",
1099 /** Firmware layout for the C58v1 */
1101 .id
= "ARCHER-C58-V1",
1105 "{product_name:Archer C58,product_ver:1.0.0,special_id:00000000}\r\n"
1106 "{product_name:Archer C58,product_ver:1.0.0,special_id:45550000}\r\n"
1107 "{product_name:Archer C58,product_ver:1.0.0,special_id:55530000}\r\n",
1109 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.0.0\n"),
1112 {"fs-uboot", 0x00000, 0x10000},
1113 {"default-mac", 0x10000, 0x00200},
1114 {"pin", 0x10200, 0x00200},
1115 {"product-info", 0x10400, 0x00100},
1116 {"partition-table", 0x10500, 0x00800},
1117 {"soft-version", 0x11300, 0x00200},
1118 {"support-list", 0x11500, 0x00100},
1119 {"device-id", 0x11600, 0x00100},
1120 {"profile", 0x11700, 0x03900},
1121 {"default-config", 0x15000, 0x04000},
1122 {"user-config", 0x19000, 0x04000},
1123 {"firmware", 0x20000, 0x7c8000},
1124 {"certyficate", 0x7e8000, 0x08000},
1125 {"radio", 0x7f0000, 0x10000},
1129 .first_sysupgrade_partition
= "os-image",
1130 .last_sysupgrade_partition
= "file-system",
1133 /** Firmware layout for the C59v1 */
1135 .id
= "ARCHER-C59-V1",
1139 "{product_name:Archer C59,product_ver:1.0.0,special_id:00000000}\r\n"
1140 "{product_name:Archer C59,product_ver:1.0.0,special_id:43410000}\r\n"
1141 "{product_name:Archer C59,product_ver:1.0.0,special_id:45550000}\r\n"
1142 "{product_name:Archer C59,product_ver:1.0.0,special_id:52550000}\r\n"
1143 "{product_name:Archer C59,product_ver:1.0.0,special_id:55530000}\r\n",
1145 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.0.0\n"),
1147 /* We're using a dynamic kernel/rootfs split here */
1149 {"fs-uboot", 0x00000, 0x10000},
1150 {"default-mac", 0x10000, 0x00200},
1151 {"pin", 0x10200, 0x00200},
1152 {"device-id", 0x10400, 0x00100},
1153 {"product-info", 0x10500, 0x0fb00},
1154 {"firmware", 0x20000, 0xe30000},
1155 {"partition-table", 0xe50000, 0x10000},
1156 {"soft-version", 0xe60000, 0x10000},
1157 {"support-list", 0xe70000, 0x10000},
1158 {"profile", 0xe80000, 0x10000},
1159 {"default-config", 0xe90000, 0x10000},
1160 {"user-config", 0xea0000, 0x40000},
1161 {"usb-config", 0xee0000, 0x10000},
1162 {"certificate", 0xef0000, 0x10000},
1163 {"qos-db", 0xf00000, 0x40000},
1164 {"log", 0xfe0000, 0x10000},
1165 {"radio", 0xff0000, 0x10000},
1169 .first_sysupgrade_partition
= "os-image",
1170 .last_sysupgrade_partition
= "file-system",
1173 /** Firmware layout for the C59v2 */
1175 .id
= "ARCHER-C59-V2",
1179 "{product_name:Archer C59,product_ver:2.0.0,special_id:00000000}\r\n"
1180 "{product_name:Archer C59,product_ver:2.0.0,special_id:43410000}\r\n"
1181 "{product_name:Archer C59,product_ver:2.0.0,special_id:45550000}\r\n"
1182 "{product_name:Archer C59,product_ver:2.0.0,special_id:55530000}\r\n",
1184 .soft_ver
= SOFT_VER_TEXT("soft_ver:2.0.0 Build 20161206 rel.7303\n"),
1186 /** We're using a dynamic kernel/rootfs split here */
1188 {"factory-boot", 0x00000, 0x20000},
1189 {"fs-uboot", 0x20000, 0x10000},
1190 {"default-mac", 0x30000, 0x00200},
1191 {"pin", 0x30200, 0x00200},
1192 {"device-id", 0x30400, 0x00100},
1193 {"product-info", 0x30500, 0x0fb00},
1194 {"firmware", 0x40000, 0xe10000},
1195 {"partition-table", 0xe50000, 0x10000},
1196 {"soft-version", 0xe60000, 0x10000},
1197 {"support-list", 0xe70000, 0x10000},
1198 {"profile", 0xe80000, 0x10000},
1199 {"default-config", 0xe90000, 0x10000},
1200 {"user-config", 0xea0000, 0x40000},
1201 {"usb-config", 0xee0000, 0x10000},
1202 {"certificate", 0xef0000, 0x10000},
1203 {"extra-para", 0xf00000, 0x10000},
1204 {"qos-db", 0xf10000, 0x30000},
1205 {"log", 0xfe0000, 0x10000},
1206 {"radio", 0xff0000, 0x10000},
1210 .first_sysupgrade_partition
= "os-image",
1211 .last_sysupgrade_partition
= "file-system",
1214 /** Firmware layout for the Archer C6 v2 (EU/RU/JP) */
1216 .id
= "ARCHER-C6-V2",
1220 "{product_name:Archer A6,product_ver:2.0.0,special_id:45550000}\r\n"
1221 "{product_name:Archer C6,product_ver:2.0.0,special_id:45550000}\r\n"
1222 "{product_name:Archer C6,product_ver:2.0.0,special_id:52550000}\r\n"
1223 "{product_name:Archer C6,product_ver:2.0.0,special_id:4A500000}\r\n",
1225 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.9.1\n"),
1228 {"fs-uboot", 0x00000, 0x20000},
1229 {"default-mac", 0x20000, 0x00200},
1230 {"pin", 0x20200, 0x00100},
1231 {"product-info", 0x20300, 0x00200},
1232 {"device-id", 0x20500, 0x0fb00},
1233 {"firmware", 0x30000, 0x7a9400},
1234 {"soft-version", 0x7d9400, 0x00100},
1235 {"extra-para", 0x7d9500, 0x00100},
1236 {"support-list", 0x7d9600, 0x00200},
1237 {"profile", 0x7d9800, 0x03000},
1238 {"default-config", 0x7dc800, 0x03000},
1239 {"partition-table", 0x7df800, 0x00800},
1240 {"user-config", 0x7e0000, 0x0c000},
1241 {"certificate", 0x7ec000, 0x04000},
1242 {"radio", 0x7f0000, 0x10000},
1246 .first_sysupgrade_partition
= "os-image",
1247 .last_sysupgrade_partition
= "file-system",
1250 /** Firmware layout for the Archer C6 v2 (US) and A6 v2 (US/TW) */
1252 .id
= "ARCHER-C6-V2-US",
1256 "{product_name:Archer A6,product_ver:2.0.0,special_id:55530000}\n"
1257 "{product_name:Archer A6,product_ver:2.0.0,special_id:54570000}\n"
1258 "{product_name:Archer C6,product_ver:2.0.0,special_id:55530000}\n",
1260 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.9.1\n"),
1263 {"factory-boot", 0x00000, 0x20000},
1264 {"default-mac", 0x20000, 0x00200},
1265 {"pin", 0x20200, 0x00100},
1266 {"product-info", 0x20300, 0x00200},
1267 {"device-id", 0x20500, 0x0fb00},
1268 {"fs-uboot", 0x30000, 0x20000},
1269 {"firmware", 0x50000, 0xf89400},
1270 {"soft-version", 0xfd9400, 0x00100},
1271 {"extra-para", 0xfd9500, 0x00100},
1272 {"support-list", 0xfd9600, 0x00200},
1273 {"profile", 0xfd9800, 0x03000},
1274 {"default-config", 0xfdc800, 0x03000},
1275 {"partition-table", 0xfdf800, 0x00800},
1276 {"user-config", 0xfe0000, 0x0c000},
1277 {"certificate", 0xfec000, 0x04000},
1278 {"radio", 0xff0000, 0x10000},
1281 .first_sysupgrade_partition
= "os-image",
1282 .last_sysupgrade_partition
= "file-system",
1284 /** Firmware layout for the Archer C6 v3 */
1286 .id
= "ARCHER-C6-V3",
1290 "{product_name:Archer C6,product_ver:3.20,special_id:55530000}"
1291 "{product_name:Archer C6,product_ver:3.20,special_id:45550000}"
1292 "{product_name:Archer C6,product_ver:3.20,special_id:52550000}"
1293 "{product_name:Archer C6,product_ver:3.20,special_id:4A500000}"
1294 "{product_name:Archer C6,product_ver:3.20,special_id:4B520000}"
1295 "{product_name:Archer C6,product_ver:3.0.0,special_id:42520000}",
1297 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.0.9\n"),
1300 {"fs-uboot", 0x00000, 0x40000},
1301 {"firmware", 0x40000, 0xf60000},
1302 {"default-mac", 0xfa0000, 0x00200},
1303 {"pin", 0xfa0200, 0x00100},
1304 {"device-id", 0xfa0300, 0x00100},
1305 {"product-info", 0xfa0400, 0x0fc00},
1306 {"default-config", 0xfb0000, 0x08000},
1307 {"ap-def-config", 0xfb8000, 0x08000},
1308 {"user-config", 0xfc0000, 0x0a000},
1309 {"ag-config", 0xfca000, 0x04000},
1310 {"certificate", 0xfce000, 0x02000},
1311 {"ap-config", 0xfd0000, 0x06000},
1312 {"router-config", 0xfd6000, 0x06000},
1313 {"favicon", 0xfdc000, 0x02000},
1314 {"logo", 0xfde000, 0x02000},
1315 {"partition-table", 0xfe0000, 0x00800},
1316 {"soft-version", 0xfe0800, 0x00100},
1317 {"support-list", 0xfe0900, 0x00200},
1318 {"profile", 0xfe0b00, 0x03000},
1319 {"extra-para", 0xfe3b00, 0x00100},
1320 {"radio", 0xff0000, 0x10000},
1323 .first_sysupgrade_partition
= "os-image",
1324 .last_sysupgrade_partition
= "file-system",
1326 /** Firmware layout for the Archer A6 v3 */
1328 .id
= "ARCHER-A6-V3",
1332 "{product_name:Archer A6,product_ver:3.0.0,special_id:43410000}\n"
1333 "{product_name:Archer A6,product_ver:3.0.0,special_id:55530000}\n"
1334 "{product_name:Archer A6,product_ver:3.0.0,special_id:54570000}\n"
1335 "{product_name:Archer A6,product_ver:3.0.0,special_id:4A500000}\n"
1336 "{product_name:Archer A6,product_ver:3.20,special_id:45550000}\n"
1337 "{product_name:Archer A6,product_ver:3.20,special_id:52550000}\n",
1339 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.0.5\n"),
1342 {"fs-uboot", 0x00000, 0x40000},
1343 {"firmware", 0x40000, 0xf60000},
1344 {"default-mac", 0xfa0000, 0x00200},
1345 {"pin", 0xfa0200, 0x00100},
1346 {"device-id", 0xfa0300, 0x00100},
1347 {"product-info", 0xfa0400, 0x0fc00},
1348 {"default-config", 0xfb0000, 0x08000},
1349 {"ap-def-config", 0xfb8000, 0x08000},
1350 {"user-config", 0xfc0000, 0x0a000},
1351 {"ag-config", 0xfca000, 0x04000},
1352 {"certificate", 0xfce000, 0x02000},
1353 {"ap-config", 0xfd0000, 0x06000},
1354 {"router-config", 0xfd6000, 0x06000},
1355 {"favicon", 0xfdc000, 0x02000},
1356 {"logo", 0xfde000, 0x02000},
1357 {"partition-table", 0xfe0000, 0x00800},
1358 {"soft-version", 0xfe0800, 0x00100},
1359 {"support-list", 0xfe0900, 0x00200},
1360 {"profile", 0xfe0b00, 0x03000},
1361 {"extra-para", 0xfe3b00, 0x00100},
1362 {"radio", 0xff0000, 0x10000},
1365 .first_sysupgrade_partition
= "os-image",
1366 .last_sysupgrade_partition
= "file-system",
1368 /** Firmware layout for the Archer C6U v1 */
1370 .id
= "ARCHER-C6U-V1",
1374 "{product_name:Archer C6U,product_ver:1.0.0,special_id:45550000}\n"
1375 "{product_name:Archer C6U,product_ver:1.0.0,special_id:52550000}\n",
1377 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.0.2\n"),
1380 {"fs-uboot", 0x00000, 0x40000},
1381 {"firmware", 0x40000, 0xf60000},
1382 {"default-mac", 0xfa0000, 0x00200},
1383 {"pin", 0xfa0200, 0x00100},
1384 {"device-id", 0xfa0300, 0x00100},
1385 {"product-info", 0xfa0400, 0x0fc00},
1386 {"default-config", 0xfb0000, 0x08000},
1387 {"ap-def-config", 0xfb8000, 0x08000},
1388 {"user-config", 0xfc0000, 0x0c000},
1389 {"certificate", 0xfcc000, 0x04000},
1390 {"ap-config", 0xfd0000, 0x08000},
1391 {"router-config", 0xfd8000, 0x08000},
1392 {"partition-table", 0xfe0000, 0x00800},
1393 {"soft-version", 0xfe0800, 0x00100},
1394 {"support-list", 0xfe0900, 0x00200},
1395 {"profile", 0xfe0b00, 0x03000},
1396 {"extra-para", 0xfe3b00, 0x00100},
1397 {"radio", 0xff0000, 0x10000},
1400 .first_sysupgrade_partition
= "os-image",
1401 .last_sysupgrade_partition
= "file-system",
1403 /** Firmware layout for the C60v1 */
1405 .id
= "ARCHER-C60-V1",
1409 "{product_name:Archer C60,product_ver:1.0.0,special_id:00000000}\r\n"
1410 "{product_name:Archer C60,product_ver:1.0.0,special_id:43410000}\r\n"
1411 "{product_name:Archer C60,product_ver:1.0.0,special_id:45550000}\r\n"
1412 "{product_name:Archer C60,product_ver:1.0.0,special_id:55530000}\r\n",
1414 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.0.0\n"),
1417 {"fs-uboot", 0x00000, 0x10000},
1418 {"default-mac", 0x10000, 0x00200},
1419 {"pin", 0x10200, 0x00200},
1420 {"product-info", 0x10400, 0x00100},
1421 {"partition-table", 0x10500, 0x00800},
1422 {"soft-version", 0x11300, 0x00200},
1423 {"support-list", 0x11500, 0x00100},
1424 {"device-id", 0x11600, 0x00100},
1425 {"profile", 0x11700, 0x03900},
1426 {"default-config", 0x15000, 0x04000},
1427 {"user-config", 0x19000, 0x04000},
1428 {"firmware", 0x20000, 0x7c8000},
1429 {"certyficate", 0x7e8000, 0x08000},
1430 {"radio", 0x7f0000, 0x10000},
1434 .first_sysupgrade_partition
= "os-image",
1435 .last_sysupgrade_partition
= "file-system",
1438 /** Firmware layout for the C60v2 */
1440 .id
= "ARCHER-C60-V2",
1444 "{product_name:Archer C60,product_ver:2.0.0,special_id:42520000}\r\n"
1445 "{product_name:Archer C60,product_ver:2.0.0,special_id:43410000}\r\n"
1446 "{product_name:Archer C60,product_ver:2.0.0,special_id:45550000}\r\n"
1447 "{product_name:Archer C60,product_ver:2.0.0,special_id:55530000}\r\n",
1449 .soft_ver
= SOFT_VER_TEXT("soft_ver:2.0.0\n"),
1452 {"factory-boot", 0x00000, 0x1fb00},
1453 {"default-mac", 0x1fb00, 0x00200},
1454 {"pin", 0x1fd00, 0x00100},
1455 {"product-info", 0x1fe00, 0x00100},
1456 {"device-id", 0x1ff00, 0x00100},
1457 {"fs-uboot", 0x20000, 0x10000},
1458 {"firmware", 0x30000, 0x7a0000},
1459 {"soft-version", 0x7d9500, 0x00100},
1460 {"support-list", 0x7d9600, 0x00100},
1461 {"extra-para", 0x7d9700, 0x00100},
1462 {"profile", 0x7d9800, 0x03000},
1463 {"default-config", 0x7dc800, 0x03000},
1464 {"partition-table", 0x7df800, 0x00800},
1465 {"user-config", 0x7e0000, 0x0c000},
1466 {"certificate", 0x7ec000, 0x04000},
1467 {"radio", 0x7f0000, 0x10000},
1471 .first_sysupgrade_partition
= "os-image",
1472 .last_sysupgrade_partition
= "file-system",
1475 /** Firmware layout for the C60v3 */
1477 .id
= "ARCHER-C60-V3",
1481 "{product_name:Archer C60,product_ver:3.0.0,special_id:42520000}\r\n"
1482 "{product_name:Archer C60,product_ver:3.0.0,special_id:43410000}\r\n"
1483 "{product_name:Archer C60,product_ver:3.0.0,special_id:45550000}\r\n"
1484 "{product_name:Archer C60,product_ver:3.0.0,special_id:55530000}\r\n",
1486 .soft_ver
= SOFT_VER_TEXT("soft_ver:3.0.0\n"),
1489 {"factory-boot", 0x00000, 0x1fb00},
1490 {"default-mac", 0x1fb00, 0x00200},
1491 {"pin", 0x1fd00, 0x00100},
1492 {"product-info", 0x1fe00, 0x00100},
1493 {"device-id", 0x1ff00, 0x00100},
1494 {"fs-uboot", 0x20000, 0x10000},
1495 {"firmware", 0x30000, 0x7a0000},
1496 {"soft-version", 0x7d9500, 0x00100},
1497 {"support-list", 0x7d9600, 0x00100},
1498 {"extra-para", 0x7d9700, 0x00100},
1499 {"profile", 0x7d9800, 0x03000},
1500 {"default-config", 0x7dc800, 0x03000},
1501 {"partition-table", 0x7df800, 0x00800},
1502 {"user-config", 0x7e0000, 0x0c000},
1503 {"certificate", 0x7ec000, 0x04000},
1504 {"radio", 0x7f0000, 0x10000},
1508 .first_sysupgrade_partition
= "os-image",
1509 .last_sysupgrade_partition
= "file-system",
1512 /** Firmware layout for the C5 */
1514 .id
= "ARCHER-C5-V2",
1518 "{product_name:ArcherC5,product_ver:2.0.0,special_id:00000000}\r\n"
1519 "{product_name:ArcherC5,product_ver:2.0.0,special_id:55530000}\r\n"
1520 "{product_name:ArcherC5,product_ver:2.0.0,special_id:4A500000}\r\n", /* JP version */
1522 .soft_ver
= SOFT_VER_DEFAULT
,
1525 {"fs-uboot", 0x00000, 0x40000},
1526 {"os-image", 0x40000, 0x200000},
1527 {"file-system", 0x240000, 0xc00000},
1528 {"default-mac", 0xe40000, 0x00200},
1529 {"pin", 0xe40200, 0x00200},
1530 {"product-info", 0xe40400, 0x00200},
1531 {"partition-table", 0xe50000, 0x10000},
1532 {"soft-version", 0xe60000, 0x00200},
1533 {"support-list", 0xe61000, 0x0f000},
1534 {"profile", 0xe70000, 0x10000},
1535 {"default-config", 0xe80000, 0x10000},
1536 {"user-config", 0xe90000, 0x50000},
1537 {"log", 0xee0000, 0x100000},
1538 {"radio_bk", 0xfe0000, 0x10000},
1539 {"radio", 0xff0000, 0x10000},
1543 .first_sysupgrade_partition
= "os-image",
1544 .last_sysupgrade_partition
= "file-system"
1547 /** Firmware layout for the C7 */
1549 .id
= "ARCHER-C7-V4",
1552 "{product_name:Archer C7,product_ver:4.0.0,special_id:00000000}\n"
1553 "{product_name:Archer C7,product_ver:4.0.0,special_id:41550000}\n"
1554 "{product_name:Archer C7,product_ver:4.0.0,special_id:45550000}\n"
1555 "{product_name:Archer C7,product_ver:4.0.0,special_id:4B520000}\n"
1556 "{product_name:Archer C7,product_ver:4.0.0,special_id:42520000}\n"
1557 "{product_name:Archer C7,product_ver:4.0.0,special_id:4A500000}\n"
1558 "{product_name:Archer C7,product_ver:4.0.0,special_id:52550000}\n"
1559 "{product_name:Archer C7,product_ver:4.0.0,special_id:54570000}\n"
1560 "{product_name:Archer C7,product_ver:4.0.0,special_id:55530000}\n"
1561 "{product_name:Archer C7,product_ver:4.0.0,special_id:43410000}\n",
1563 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.0.0\n"),
1565 /* We're using a dynamic kernel/rootfs split here */
1567 {"factory-boot", 0x00000, 0x20000},
1568 {"fs-uboot", 0x20000, 0x20000},
1569 {"firmware", 0x40000, 0xEC0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
1570 /* Stock: name file-system base 0x160000 size 0xda0000 */
1571 {"default-mac", 0xf00000, 0x00200},
1572 {"pin", 0xf00200, 0x00200},
1573 {"device-id", 0xf00400, 0x00100},
1574 {"product-info", 0xf00500, 0x0fb00},
1575 {"soft-version", 0xf10000, 0x00100},
1576 {"extra-para", 0xf11000, 0x01000},
1577 {"support-list", 0xf12000, 0x0a000},
1578 {"profile", 0xf1c000, 0x04000},
1579 {"default-config", 0xf20000, 0x10000},
1580 {"user-config", 0xf30000, 0x40000},
1581 {"qos-db", 0xf70000, 0x40000},
1582 {"certificate", 0xfb0000, 0x10000},
1583 {"partition-table", 0xfc0000, 0x10000},
1584 {"log", 0xfd0000, 0x20000},
1585 {"radio", 0xff0000, 0x10000},
1589 .first_sysupgrade_partition
= "os-image",
1590 .last_sysupgrade_partition
= "file-system",
1593 /** Firmware layout for the C7 v5*/
1595 .id
= "ARCHER-C7-V5",
1598 "{product_name:Archer C7,product_ver:5.0.0,special_id:00000000}\n"
1599 "{product_name:Archer C7,product_ver:5.0.0,special_id:45550000}\n"
1600 "{product_name:Archer C7,product_ver:5.0.0,special_id:55530000}\n"
1601 "{product_name:Archer C7,product_ver:5.0.0,special_id:43410000}\n"
1602 "{product_name:Archer C7,product_ver:5.0.0,special_id:4A500000}\n"
1603 "{product_name:Archer C7,product_ver:5.0.0,special_id:54570000}\n"
1604 "{product_name:Archer C7,product_ver:5.0.0,special_id:52550000}\n"
1605 "{product_name:Archer C7,product_ver:5.0.0,special_id:4B520000}\n",
1608 .soft_ver
= SOFT_VER_TEXT("soft_ver:7.0.0\n"),
1610 /* We're using a dynamic kernel/rootfs split here */
1612 {"factory-boot", 0x00000, 0x20000},
1613 {"fs-uboot", 0x20000, 0x20000},
1614 {"partition-table", 0x40000, 0x10000},
1615 {"radio", 0x50000, 0x10000},
1616 {"default-mac", 0x60000, 0x00200},
1617 {"pin", 0x60200, 0x00200},
1618 {"device-id", 0x60400, 0x00100},
1619 {"product-info", 0x60500, 0x0fb00},
1620 {"soft-version", 0x70000, 0x01000},
1621 {"extra-para", 0x71000, 0x01000},
1622 {"support-list", 0x72000, 0x0a000},
1623 {"profile", 0x7c000, 0x04000},
1624 {"user-config", 0x80000, 0x40000},
1627 {"firmware", 0xc0000, 0xf00000}, /* Stock: name os-image base 0xc0000 size 0x120000 */
1628 /* Stock: name file-system base 0x1e0000 size 0xde0000 */
1630 {"log", 0xfc0000, 0x20000},
1631 {"certificate", 0xfe0000, 0x10000},
1632 {"default-config", 0xff0000, 0x10000},
1637 .first_sysupgrade_partition
= "os-image",
1638 .last_sysupgrade_partition
= "file-system",
1641 /** Firmware layout for the C9 */
1647 "{product_name:ArcherC9,"
1648 "product_ver:1.0.0,"
1649 "special_id:00000000}\n",
1651 .soft_ver
= SOFT_VER_DEFAULT
,
1654 {"fs-uboot", 0x00000, 0x40000},
1655 {"os-image", 0x40000, 0x200000},
1656 {"file-system", 0x240000, 0xc00000},
1657 {"default-mac", 0xe40000, 0x00200},
1658 {"pin", 0xe40200, 0x00200},
1659 {"product-info", 0xe40400, 0x00200},
1660 {"partition-table", 0xe50000, 0x10000},
1661 {"soft-version", 0xe60000, 0x00200},
1662 {"support-list", 0xe61000, 0x0f000},
1663 {"profile", 0xe70000, 0x10000},
1664 {"default-config", 0xe80000, 0x10000},
1665 {"user-config", 0xe90000, 0x50000},
1666 {"log", 0xee0000, 0x100000},
1667 {"radio_bk", 0xfe0000, 0x10000},
1668 {"radio", 0xff0000, 0x10000},
1672 .first_sysupgrade_partition
= "os-image",
1673 .last_sysupgrade_partition
= "file-system"
1676 /** Firmware layout for the Deco M4R v1 and v2 */
1678 .id
= "DECO-M4R-V1",
1682 "{product_name:M4R,product_ver:1.0.0,special_id:55530000}\n"
1683 "{product_name:M4R,product_ver:1.0.0,special_id:45550000}\n"
1684 "{product_name:M4R,product_ver:1.0.0,special_id:43410000}\n"
1685 "{product_name:M4R,product_ver:1.0.0,special_id:4A500000}\n"
1686 "{product_name:M4R,product_ver:1.0.0,special_id:41550000}\n"
1687 "{product_name:M4R,product_ver:1.0.0,special_id:4B520000}\n"
1688 "{product_name:M4R,product_ver:1.0.0,special_id:49440000}\n"
1689 "{product_name:M4R,product_ver:2.0.0,special_id:55530000}\n"
1690 "{product_name:M4R,product_ver:2.0.0,special_id:45550000}\n"
1691 "{product_name:M4R,product_ver:2.0.0,special_id:43410000}\n"
1692 "{product_name:M4R,product_ver:2.0.0,special_id:4A500000}\n"
1693 "{product_name:M4R,product_ver:2.0.0,special_id:41550000}\n"
1694 "{product_name:M4R,product_ver:2.0.0,special_id:4B520000}\n"
1695 "{product_name:M4R,product_ver:2.0.0,special_id:54570000}\n"
1696 "{product_name:M4R,product_ver:2.0.0,special_id:42340000}\n"
1697 "{product_name:M4R,product_ver:2.0.0,special_id:49440000}\n",
1699 .soft_ver
= SOFT_VER_DEFAULT
,
1702 {"fs-uboot", 0x00000, 0x80000},
1703 {"firmware", 0x80000, 0xe00000},
1704 {"product-info", 0xe80000, 0x05000},
1705 {"default-mac", 0xe85000, 0x01000},
1706 {"device-id", 0xe86000, 0x01000},
1707 {"support-list", 0xe87000, 0x10000},
1708 {"user-config", 0xea7000, 0x10000},
1709 {"device-config", 0xeb7000, 0x10000},
1710 {"group-info", 0xec7000, 0x10000},
1711 {"partition-table", 0xed7000, 0x02000},
1712 {"soft-version", 0xed9000, 0x10000},
1713 {"profile", 0xee9000, 0x10000},
1714 {"default-config", 0xef9000, 0x10000},
1715 {"url-sig", 0xfe0000, 0x10000},
1716 {"radio", 0xff0000, 0x10000},
1719 .first_sysupgrade_partition
= "os-image",
1720 .last_sysupgrade_partition
= "file-system",
1723 /** Firmware layout for the Deco M4R v4 */
1725 .id
= "DECO-M4R-V4",
1729 "{product_name:M4R,product_ver:4.0.0,special_id:55530000}\n"
1730 "{product_name:M4R,product_ver:4.0.0,special_id:45550000}\n"
1731 "{product_name:M4R,product_ver:4.0.0,special_id:4A500000}\n"
1732 "{product_name:M4R,product_ver:4.0.0,special_id:42340000}\n"
1733 "{product_name:M4R,product_ver:4.0.0,special_id:5A470000}\n",
1735 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.0.0\n"),
1738 {"fs-uboot", 0x00000, 0x40000},
1739 {"firmware", 0x40000, 0xf60000},
1740 {"default-mac", 0xfa0000, 0x00300},
1741 {"device-id", 0xfa0300, 0x00100},
1742 {"product-info", 0xfa0400, 0x0fc00},
1743 {"group-info", 0xfb0000, 0x04000},
1744 {"user-config", 0xfb4000, 0x0c000},
1745 {"device-config", 0xfc0000, 0x10000},
1746 {"default-config", 0xfd0000, 0x10000},
1747 {"partition-table", 0xfe0000, 0x00800},
1748 {"soft-version", 0xfe0800, 0x00100},
1749 {"support-list", 0xfe0900, 0x00200},
1750 {"profile", 0xfe0b00, 0x03000},
1751 {"extra-para", 0xfe3b00, 0x00100},
1752 {"radio", 0xff0000, 0x10000},
1755 .first_sysupgrade_partition
= "os-image",
1756 .last_sysupgrade_partition
= "file-system",
1759 /** Firmware layout for the Deco S4 v2 */
1765 "{product_name:S4,product_ver:1.0.0,special_id:55530000}\n"
1766 "{product_name:S4,product_ver:1.0.0,special_id:45550000}\n"
1767 "{product_name:S4,product_ver:1.0.0,special_id:43410000}\n"
1768 "{product_name:S4,product_ver:1.0.0,special_id:4A500000}\n"
1769 "{product_name:S4,product_ver:1.0.0,special_id:41550000}\n"
1770 "{product_name:S4,product_ver:1.0.0,special_id:4B520000}\n"
1771 "{product_name:S4,product_ver:2.0.0,special_id:55530000}\n"
1772 "{product_name:S4,product_ver:2.0.0,special_id:45550000}\n"
1773 "{product_name:S4,product_ver:2.0.0,special_id:43410000}\n"
1774 "{product_name:S4,product_ver:2.0.0,special_id:4A500000}\n"
1775 "{product_name:S4,product_ver:2.0.0,special_id:41550000}\n"
1776 "{product_name:S4,product_ver:2.0.0,special_id:4B520000}\n",
1778 .soft_ver
= SOFT_VER_DEFAULT
,
1781 {"fs-uboot", 0x00000, 0x80000},
1782 {"product-info", 0x80000, 0x05000},
1783 {"default-mac", 0x85000, 0x01000},
1784 {"device-id", 0x86000, 0x01000},
1785 {"support-list", 0x87000, 0x10000},
1786 {"user-config", 0xa7000, 0x10000},
1787 {"device-config", 0xb7000, 0x10000},
1788 {"group-info", 0xc7000, 0x10000},
1789 {"partition-table", 0xd7000, 0x02000},
1790 {"soft-version", 0xd9000, 0x10000},
1791 {"profile", 0xe9000, 0x10000},
1792 {"default-config", 0xf9000, 0x10000},
1793 {"url-sig", 0x1e0000, 0x10000},
1794 {"radio", 0x1f0000, 0x10000},
1795 {"firmware", 0x200000, 0xe00000},
1798 .first_sysupgrade_partition
= "os-image",
1799 .last_sysupgrade_partition
= "file-system",
1802 /** Firmware layout for the EAP120 */
1805 .vendor
= "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1808 "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1810 .soft_ver
= SOFT_VER_DEFAULT
,
1813 {"fs-uboot", 0x00000, 0x20000},
1814 {"partition-table", 0x20000, 0x02000},
1815 {"default-mac", 0x30000, 0x00020},
1816 {"support-list", 0x31000, 0x00100},
1817 {"product-info", 0x31100, 0x00100},
1818 {"soft-version", 0x32000, 0x00100},
1819 {"os-image", 0x40000, 0x180000},
1820 {"file-system", 0x1c0000, 0x600000},
1821 {"user-config", 0x7c0000, 0x10000},
1822 {"backup-config", 0x7d0000, 0x10000},
1823 {"log", 0x7e0000, 0x10000},
1824 {"radio", 0x7f0000, 0x10000},
1828 .first_sysupgrade_partition
= "os-image",
1829 .last_sysupgrade_partition
= "file-system"
1832 /** Firmware layout for the EAP225-Outdoor v1 */
1834 .id
= "EAP225-OUTDOOR-V1",
1837 "EAP225-Outdoor(TP-Link|UN|AC1200-D):1.0\r\n",
1838 .part_trail
= PART_TRAIL_NONE
,
1839 .soft_ver
= SOFT_VER_DEFAULT
,
1840 .soft_ver_compat_level
= 1,
1843 {"fs-uboot", 0x00000, 0x20000},
1844 {"partition-table", 0x20000, 0x02000},
1845 {"default-mac", 0x30000, 0x01000},
1846 {"support-list", 0x31000, 0x00100},
1847 {"product-info", 0x31100, 0x00400},
1848 {"soft-version", 0x32000, 0x00100},
1849 {"firmware", 0x40000, 0xd80000},
1850 {"user-config", 0xdc0000, 0x30000},
1851 {"mutil-log", 0xf30000, 0x80000},
1852 {"oops", 0xfb0000, 0x40000},
1853 {"radio", 0xff0000, 0x10000},
1857 .first_sysupgrade_partition
= "os-image",
1858 .last_sysupgrade_partition
= "file-system"
1861 /** Firmware layout for the EAP225 v1 */
1866 "EAP225(TP-LINK|UN|AC1200-D):1.0\r\n",
1867 .part_trail
= PART_TRAIL_NONE
,
1868 .soft_ver
= SOFT_VER_DEFAULT
,
1871 {"fs-uboot", 0x00000, 0x20000},
1872 {"partition-table", 0x20000, 0x02000},
1873 {"default-mac", 0x30000, 0x01000},
1874 {"support-list", 0x31000, 0x00100},
1875 {"product-info", 0x31100, 0x00400},
1876 {"soft-version", 0x32000, 0x00100},
1877 {"firmware", 0x40000, 0xd80000},
1878 {"user-config", 0xdc0000, 0x30000},
1879 {"radio", 0xff0000, 0x10000},
1883 .first_sysupgrade_partition
= "os-image",
1884 .last_sysupgrade_partition
= "file-system"
1887 /** Firmware layout for the EAP225 v3
1888 * Also compatible with:
1891 * - EAP225-Outdoor v1
1892 * - EAP225-Outdoor v3
1898 "EAP225(TP-Link|UN|AC1350-D):3.0\r\n"
1899 "EAP225(TP-Link|UN|AC1350-D):3.20\r\n"
1900 "EAP225(TP-Link|UN|AC1350-D):4.0 CA\r\n"
1901 "EAP225-Outdoor(TP-Link|UN|AC1200-D):1.0\r\n"
1902 "EAP225-Outdoor(TP-Link|UN|AC1200-D):3.0 CA,JP\r\n",
1903 .part_trail
= PART_TRAIL_NONE
,
1904 .soft_ver
= SOFT_VER_DEFAULT
,
1905 .soft_ver_compat_level
= 1,
1908 {"fs-uboot", 0x00000, 0x20000},
1909 {"partition-table", 0x20000, 0x02000},
1910 {"default-mac", 0x30000, 0x01000},
1911 {"support-list", 0x31000, 0x00100},
1912 {"product-info", 0x31100, 0x00400},
1913 {"soft-version", 0x32000, 0x00100},
1914 {"firmware", 0x40000, 0xd80000},
1915 {"user-config", 0xdc0000, 0x30000},
1916 {"mutil-log", 0xf30000, 0x80000},
1917 {"oops", 0xfb0000, 0x40000},
1918 {"radio", 0xff0000, 0x10000},
1922 .first_sysupgrade_partition
= "os-image",
1923 .last_sysupgrade_partition
= "file-system"
1926 /** Firmware layout for the EAP225-Wall v2 */
1928 .id
= "EAP225-WALL-V2",
1931 "EAP225-Wall(TP-Link|UN|AC1200-D):2.0\r\n",
1932 .part_trail
= PART_TRAIL_NONE
,
1933 .soft_ver
= SOFT_VER_DEFAULT
,
1934 .soft_ver_compat_level
= 1,
1937 {"fs-uboot", 0x00000, 0x20000},
1938 {"partition-table", 0x20000, 0x02000},
1939 {"default-mac", 0x30000, 0x01000},
1940 {"support-list", 0x31000, 0x00100},
1941 {"product-info", 0x31100, 0x00400},
1942 {"soft-version", 0x32000, 0x00100},
1943 {"firmware", 0x40000, 0xd80000},
1944 {"user-config", 0xdc0000, 0x30000},
1945 {"mutil-log", 0xf30000, 0x80000},
1946 {"oops", 0xfb0000, 0x40000},
1947 {"radio", 0xff0000, 0x10000},
1951 .first_sysupgrade_partition
= "os-image",
1952 .last_sysupgrade_partition
= "file-system"
1955 /** Firmware layout for the EAP235-Wall v1 */
1957 .id
= "EAP235-WALL-V1",
1960 "EAP235-Wall(TP-Link|UN|AC1200-D):1.0\r\n",
1961 .part_trail
= PART_TRAIL_NONE
,
1962 .soft_ver
= SOFT_VER_NUMERIC(3, 0, 0),
1963 .soft_ver_compat_level
= 1,
1966 {"fs-uboot", 0x00000, 0x80000},
1967 {"partition-table", 0x80000, 0x02000},
1968 {"default-mac", 0x90000, 0x01000},
1969 {"support-list", 0x91000, 0x00100},
1970 {"product-info", 0x91100, 0x00400},
1971 {"soft-version", 0x92000, 0x00100},
1972 {"firmware", 0xa0000, 0xd20000},
1973 {"user-config", 0xdc0000, 0x30000},
1974 {"mutil-log", 0xf30000, 0x80000},
1975 {"oops", 0xfb0000, 0x40000},
1976 {"radio", 0xff0000, 0x10000},
1980 .first_sysupgrade_partition
= "os-image",
1981 .last_sysupgrade_partition
= "file-system"
1984 /** Firmware layout for the EAP245 v1 */
1989 "EAP245(TP-LINK|UN|AC1750-D):1.0\r\n",
1990 .part_trail
= PART_TRAIL_NONE
,
1991 .soft_ver
= SOFT_VER_DEFAULT
,
1994 {"fs-uboot", 0x00000, 0x20000},
1995 {"partition-table", 0x20000, 0x02000},
1996 {"default-mac", 0x30000, 0x01000},
1997 {"support-list", 0x31000, 0x00100},
1998 {"product-info", 0x31100, 0x00400},
1999 {"soft-version", 0x32000, 0x00100},
2000 {"firmware", 0x40000, 0xd80000},
2001 {"user-config", 0xdc0000, 0x30000},
2002 {"radio", 0xff0000, 0x10000},
2006 .first_sysupgrade_partition
= "os-image",
2007 .last_sysupgrade_partition
= "file-system"
2010 /** Firmware layout for the EAP245 v3 */
2015 "EAP245(TP-Link|UN|AC1750-D):3.0\r\n"
2016 "EAP265 HD(TP-Link|UN|AC1750-D):1.0",
2017 .part_trail
= PART_TRAIL_NONE
,
2018 .soft_ver
= SOFT_VER_DEFAULT
,
2019 .soft_ver_compat_level
= 1,
2021 /** Firmware partition with dynamic kernel/rootfs split */
2023 {"factroy-boot", 0x00000, 0x40000},
2024 {"fs-uboot", 0x40000, 0x40000},
2025 {"partition-table", 0x80000, 0x10000},
2026 {"default-mac", 0x90000, 0x01000},
2027 {"support-list", 0x91000, 0x00100},
2028 {"product-info", 0x91100, 0x00400},
2029 {"soft-version", 0x92000, 0x00100},
2030 {"radio", 0xa0000, 0x10000},
2031 {"extra-para", 0xb0000, 0x10000},
2032 {"firmware", 0xc0000, 0xe40000},
2033 {"config", 0xf00000, 0x30000},
2034 {"mutil-log", 0xf30000, 0x80000},
2035 {"oops", 0xfb0000, 0x40000},
2039 .first_sysupgrade_partition
= "os-image",
2040 .last_sysupgrade_partition
= "file-system"
2043 /** Firmware layout for the EAP615-Wall v1 */
2045 .id
= "EAP615-WALL-V1",
2046 .soft_ver
= SOFT_VER_DEFAULT
,
2047 .soft_ver_compat_level
= 1,
2050 "EAP615-Wall(TP-Link|UN|AX1800-D):1.0\r\n"
2051 "EAP615-Wall(TP-Link|CA|AX1800-D):1.0\r\n"
2052 "EAP615-Wall(TP-Link|JP|AX1800-D):1.0\r\n",
2053 .part_trail
= PART_TRAIL_NONE
,
2056 {"fs-uboot", 0x00000, 0x80000},
2057 {"partition-table", 0x80000, 0x02000},
2058 {"default-mac", 0x90000, 0x01000},
2059 {"support-list", 0x91000, 0x00100},
2060 {"product-info", 0x91100, 0x00400},
2061 {"soft-version", 0x92000, 0x00100},
2062 {"firmware", 0xa0000, 0xcf0000},
2063 {"user-config", 0xd90000, 0x60000},
2064 {"mutil-log", 0xf30000, 0x80000},
2065 {"oops", 0xfb0000, 0x40000},
2066 {"radio", 0xff0000, 0x10000},
2070 .first_sysupgrade_partition
= "os-image",
2071 .last_sysupgrade_partition
= "file-system"
2074 /** Firmware layout for the TL-WA1201 v2 */
2076 .id
= "TL-WA1201-V2",
2080 "{product_name:TL-WA1201,product_ver:2.0.0,special_id:45550000}\n"
2081 "{product_name:TL-WA1201,product_ver:2.0.0,special_id:55530000}\n",
2083 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.0.1 Build 20200709 rel.66244\n"),
2086 {"fs-uboot", 0x00000, 0x20000},
2087 {"default-mac", 0x20000, 0x00200},
2088 {"pin", 0x20200, 0x00100},
2089 {"product-info", 0x20300, 0x00200},
2090 {"device-id", 0x20500, 0x0fb00},
2091 {"firmware", 0x30000, 0xce0000},
2092 {"portal-logo", 0xd10000, 0x20000},
2093 {"portal-back", 0xd30000, 0x200000},
2094 {"soft-version", 0xf30000, 0x00200},
2095 {"extra-para", 0xf30200, 0x00200},
2096 {"support-list", 0xf30400, 0x00200},
2097 {"profile", 0xf30600, 0x0fa00},
2098 {"apdef-config", 0xf40000, 0x10000},
2099 {"ap-config", 0xf50000, 0x10000},
2100 {"redef-config", 0xf60000, 0x10000},
2101 {"re-config", 0xf70000, 0x10000},
2102 {"multidef-config", 0xf80000, 0x10000},
2103 {"multi-config", 0xf90000, 0x10000},
2104 {"clientdef-config", 0xfa0000, 0x10000},
2105 {"client-config", 0xfb0000, 0x10000},
2106 {"partition-table", 0xfc0000, 0x10000},
2107 {"user-config", 0xfd0000, 0x10000},
2108 {"certificate", 0xfe0000, 0x10000},
2109 {"radio", 0xff0000, 0x10000},
2112 .first_sysupgrade_partition
= "os-image",
2113 .last_sysupgrade_partition
= "file-system",
2116 /** Firmware layout for the TL-WA850RE v2 */
2118 .id
= "TLWA850REV2",
2122 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55530000}\n"
2123 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:00000000}\n"
2124 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55534100}\n"
2125 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:45550000}\n"
2126 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4B520000}\n"
2127 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:42520000}\n"
2128 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4A500000}\n"
2129 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:43410000}\n"
2130 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:41550000}\n"
2131 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:52550000}\n",
2133 .soft_ver
= SOFT_VER_DEFAULT
,
2136 576KB were moved from file-system to os-image
2137 in comparison to the stock image
2140 {"fs-uboot", 0x00000, 0x20000},
2141 {"firmware", 0x20000, 0x390000},
2142 {"partition-table", 0x3b0000, 0x02000},
2143 {"default-mac", 0x3c0000, 0x00020},
2144 {"pin", 0x3c0100, 0x00020},
2145 {"product-info", 0x3c1000, 0x01000},
2146 {"soft-version", 0x3c2000, 0x00100},
2147 {"support-list", 0x3c3000, 0x01000},
2148 {"profile", 0x3c4000, 0x08000},
2149 {"user-config", 0x3d0000, 0x10000},
2150 {"default-config", 0x3e0000, 0x10000},
2151 {"radio", 0x3f0000, 0x10000},
2155 .first_sysupgrade_partition
= "os-image",
2156 .last_sysupgrade_partition
= "file-system"
2159 /** Firmware layout for the TL-WA855RE v1 */
2161 .id
= "TLWA855REV1",
2165 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:00000000}\n"
2166 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:55530000}\n"
2167 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:45550000}\n"
2168 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4B520000}\n"
2169 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:42520000}\n"
2170 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4A500000}\n"
2171 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:43410000}\n"
2172 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:41550000}\n"
2173 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:52550000}\n",
2175 .soft_ver
= SOFT_VER_DEFAULT
,
2178 {"fs-uboot", 0x00000, 0x20000},
2179 {"os-image", 0x20000, 0x150000},
2180 {"file-system", 0x170000, 0x240000},
2181 {"partition-table", 0x3b0000, 0x02000},
2182 {"default-mac", 0x3c0000, 0x00020},
2183 {"pin", 0x3c0100, 0x00020},
2184 {"product-info", 0x3c1000, 0x01000},
2185 {"soft-version", 0x3c2000, 0x00100},
2186 {"support-list", 0x3c3000, 0x01000},
2187 {"profile", 0x3c4000, 0x08000},
2188 {"user-config", 0x3d0000, 0x10000},
2189 {"default-config", 0x3e0000, 0x10000},
2190 {"radio", 0x3f0000, 0x10000},
2194 .first_sysupgrade_partition
= "os-image",
2195 .last_sysupgrade_partition
= "file-system"
2198 /** Firmware layout for the TL-WPA8630P v2 (EU)*/
2200 .id
= "TL-WPA8630P-V2.0-EU",
2204 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:45550000}\n",
2206 .soft_ver
= SOFT_VER_DEFAULT
,
2209 {"factory-uboot", 0x00000, 0x20000},
2210 {"fs-uboot", 0x20000, 0x20000},
2211 {"firmware", 0x40000, 0x5e0000},
2212 {"partition-table", 0x620000, 0x02000},
2213 {"default-mac", 0x630000, 0x00020},
2214 {"pin", 0x630100, 0x00020},
2215 {"device-id", 0x630200, 0x00030},
2216 {"product-info", 0x631100, 0x01000},
2217 {"extra-para", 0x632100, 0x01000},
2218 {"soft-version", 0x640000, 0x01000},
2219 {"support-list", 0x641000, 0x01000},
2220 {"profile", 0x642000, 0x08000},
2221 {"user-config", 0x650000, 0x10000},
2222 {"default-config", 0x660000, 0x10000},
2223 {"default-nvm", 0x670000, 0xc0000},
2224 {"default-pib", 0x730000, 0x40000},
2225 {"radio", 0x7f0000, 0x10000},
2229 .first_sysupgrade_partition
= "os-image",
2230 .last_sysupgrade_partition
= "file-system"
2233 /** Firmware layout for the TL-WPA8630P v2 (INT)*/
2235 .id
= "TL-WPA8630P-V2-INT",
2239 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:41550000}\n"
2240 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:44450000}\n"
2241 "{product_name:TL-WPA8630P,product_ver:2.1.0,special_id:41550000}\n",
2243 .soft_ver
= SOFT_VER_DEFAULT
,
2246 {"factory-uboot", 0x00000, 0x20000},
2247 {"fs-uboot", 0x20000, 0x20000},
2248 {"firmware", 0x40000, 0x5e0000},
2249 {"partition-table", 0x620000, 0x02000},
2250 {"extra-para", 0x632100, 0x01000},
2251 {"soft-version", 0x640000, 0x01000},
2252 {"support-list", 0x641000, 0x01000},
2253 {"profile", 0x642000, 0x08000},
2254 {"user-config", 0x650000, 0x10000},
2255 {"default-config", 0x660000, 0x10000},
2256 {"default-nvm", 0x670000, 0xc0000},
2257 {"default-pib", 0x730000, 0x40000},
2258 {"default-mac", 0x7e0000, 0x00020},
2259 {"pin", 0x7e0100, 0x00020},
2260 {"device-id", 0x7e0200, 0x00030},
2261 {"product-info", 0x7e1100, 0x01000},
2262 {"radio", 0x7f0000, 0x10000},
2266 .first_sysupgrade_partition
= "os-image",
2267 .last_sysupgrade_partition
= "file-system"
2270 /** Firmware layout for the TL-WPA8630P v2.1 (EU)*/
2272 .id
= "TL-WPA8630P-V2.1-EU",
2276 "{product_name:TL-WPA8630P,product_ver:2.1.0,special_id:45550000}\n",
2278 .soft_ver
= SOFT_VER_DEFAULT
,
2281 {"factory-uboot", 0x00000, 0x20000},
2282 {"fs-uboot", 0x20000, 0x20000},
2283 {"firmware", 0x40000, 0x5e0000},
2284 {"extra-para", 0x680000, 0x01000},
2285 {"product-info", 0x690000, 0x01000},
2286 {"partition-table", 0x6a0000, 0x02000},
2287 {"soft-version", 0x6b0000, 0x01000},
2288 {"support-list", 0x6b1000, 0x01000},
2289 {"profile", 0x6b2000, 0x08000},
2290 {"user-config", 0x6c0000, 0x10000},
2291 {"default-config", 0x6d0000, 0x10000},
2292 {"default-nvm", 0x6e0000, 0xc0000},
2293 {"default-pib", 0x7a0000, 0x40000},
2294 {"default-mac", 0x7e0000, 0x00020},
2295 {"pin", 0x7e0100, 0x00020},
2296 {"device-id", 0x7e0200, 0x00030},
2297 {"radio", 0x7f0000, 0x10000},
2301 .first_sysupgrade_partition
= "os-image",
2302 .last_sysupgrade_partition
= "file-system"
2305 /** Firmware layout for the TL-WPA8631P v3 */
2307 .id
= "TL-WPA8631P-V3",
2311 "{product_name:TL-WPA8631P,product_ver:3.0.0,special_id:41550000}\n"
2312 "{product_name:TL-WPA8631P,product_ver:3.0.0,special_id:45550000}\n"
2313 "{product_name:TL-WPA8631P,product_ver:3.0.0,special_id:55530000}\n"
2314 "{product_name:TL-WPA8631P,product_ver:4.0.0,special_id:45550000}\n"
2315 "{product_name:TL-WPA8635P,product_ver:3.0.0,special_id:46520000}\n",
2317 .soft_ver
= SOFT_VER_DEFAULT
,
2320 {"fs-uboot", 0x00000, 0x20000},
2321 {"firmware", 0x20000, 0x710000},
2322 {"partition-table", 0x730000, 0x02000},
2323 {"default-mac", 0x732000, 0x00020},
2324 {"pin", 0x732100, 0x00020},
2325 {"device-id", 0x732200, 0x00030},
2326 {"default-region", 0x732300, 0x00010},
2327 {"product-info", 0x732400, 0x00200},
2328 {"extra-para", 0x732600, 0x00200},
2329 {"soft-version", 0x732800, 0x00100},
2330 {"support-list", 0x732900, 0x00200},
2331 {"profile", 0x732b00, 0x00100},
2332 {"default-config", 0x732c00, 0x00800},
2333 {"plc-type", 0x733400, 0x00020},
2334 {"default-pib", 0x733500, 0x06000},
2335 {"user-config", 0x740000, 0x10000},
2336 {"plc-pib", 0x750000, 0x10000},
2337 {"plc-nvm", 0x760000, 0x90000},
2338 {"radio", 0x7f0000, 0x10000},
2342 .first_sysupgrade_partition
= "os-image",
2343 .last_sysupgrade_partition
= "file-system"
2346 /** Firmware layout for the TL-WR1043 v5 */
2348 .id
= "TLWR1043NV5",
2352 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:45550000}\n"
2353 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:55530000}\n",
2355 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.0.0\n"),
2357 {"factory-boot", 0x00000, 0x20000},
2358 {"fs-uboot", 0x20000, 0x20000},
2359 {"firmware", 0x40000, 0xec0000},
2360 {"default-mac", 0xf00000, 0x00200},
2361 {"pin", 0xf00200, 0x00200},
2362 {"device-id", 0xf00400, 0x00100},
2363 {"product-info", 0xf00500, 0x0fb00},
2364 {"soft-version", 0xf10000, 0x01000},
2365 {"extra-para", 0xf11000, 0x01000},
2366 {"support-list", 0xf12000, 0x0a000},
2367 {"profile", 0xf1c000, 0x04000},
2368 {"default-config", 0xf20000, 0x10000},
2369 {"user-config", 0xf30000, 0x40000},
2370 {"qos-db", 0xf70000, 0x40000},
2371 {"certificate", 0xfb0000, 0x10000},
2372 {"partition-table", 0xfc0000, 0x10000},
2373 {"log", 0xfd0000, 0x20000},
2374 {"radio", 0xff0000, 0x10000},
2377 .first_sysupgrade_partition
= "os-image",
2378 .last_sysupgrade_partition
= "file-system"
2381 /** Firmware layout for the TL-WR1043 v4 */
2383 .id
= "TLWR1043NDV4",
2387 "{product_name:TL-WR1043ND,product_ver:4.0.0,special_id:45550000}\n",
2389 .soft_ver
= SOFT_VER_DEFAULT
,
2391 /* We're using a dynamic kernel/rootfs split here */
2393 {"fs-uboot", 0x00000, 0x20000},
2394 {"firmware", 0x20000, 0xf30000},
2395 {"default-mac", 0xf50000, 0x00200},
2396 {"pin", 0xf50200, 0x00200},
2397 {"product-info", 0xf50400, 0x0fc00},
2398 {"soft-version", 0xf60000, 0x0b000},
2399 {"support-list", 0xf6b000, 0x04000},
2400 {"profile", 0xf70000, 0x04000},
2401 {"default-config", 0xf74000, 0x0b000},
2402 {"user-config", 0xf80000, 0x40000},
2403 {"partition-table", 0xfc0000, 0x10000},
2404 {"log", 0xfd0000, 0x20000},
2405 {"radio", 0xff0000, 0x10000},
2409 .first_sysupgrade_partition
= "os-image",
2410 .last_sysupgrade_partition
= "file-system"
2413 /** Firmware layout for the TL-WR902AC v1 */
2415 .id
= "TL-WR902AC-V1",
2419 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:45550000}\n"
2420 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:55530000}\n",
2422 .soft_ver
= SOFT_VER_DEFAULT
,
2425 384KB were moved from file-system to os-image
2426 in comparison to the stock image
2429 {"fs-uboot", 0x00000, 0x20000},
2430 {"firmware", 0x20000, 0x730000},
2431 {"default-mac", 0x750000, 0x00200},
2432 {"pin", 0x750200, 0x00200},
2433 {"product-info", 0x750400, 0x0fc00},
2434 {"soft-version", 0x760000, 0x0b000},
2435 {"support-list", 0x76b000, 0x04000},
2436 {"profile", 0x770000, 0x04000},
2437 {"default-config", 0x774000, 0x0b000},
2438 {"user-config", 0x780000, 0x40000},
2439 {"partition-table", 0x7c0000, 0x10000},
2440 {"log", 0x7d0000, 0x20000},
2441 {"radio", 0x7f0000, 0x10000},
2445 .first_sysupgrade_partition
= "os-image",
2446 .last_sysupgrade_partition
= "file-system",
2449 /** Firmware layout for the TL-WR941HP v1 */
2451 .id
= "TL-WR941HP-V1",
2455 "{product_name:TL-WR941HP,product_ver:1.0.0,special_id:00000000}\n",
2457 .soft_ver
= SOFT_VER_DEFAULT
,
2460 {"fs-uboot", 0x00000, 0x20000},
2461 {"firmware", 0x20000, 0x730000},
2462 {"default-mac", 0x750000, 0x00200},
2463 {"pin", 0x750200, 0x00200},
2464 {"product-info", 0x750400, 0x0fc00},
2465 {"soft-version", 0x760000, 0x0b000},
2466 {"support-list", 0x76b000, 0x04000},
2467 {"profile", 0x770000, 0x04000},
2468 {"default-config", 0x774000, 0x0b000},
2469 {"user-config", 0x780000, 0x40000},
2470 {"partition-table", 0x7c0000, 0x10000},
2471 {"log", 0x7d0000, 0x20000},
2472 {"radio", 0x7f0000, 0x10000},
2476 .first_sysupgrade_partition
= "os-image",
2477 .last_sysupgrade_partition
= "file-system",
2480 /** Firmware layout for the TL-WR942N V1 */
2486 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:00000000}\r\n"
2487 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:52550000}\r\n",
2489 .soft_ver
= SOFT_VER_DEFAULT
,
2492 {"fs-uboot", 0x00000, 0x20000},
2493 {"firmware", 0x20000, 0xe20000},
2494 {"default-mac", 0xe40000, 0x00200},
2495 {"pin", 0xe40200, 0x00200},
2496 {"product-info", 0xe40400, 0x0fc00},
2497 {"partition-table", 0xe50000, 0x10000},
2498 {"soft-version", 0xe60000, 0x10000},
2499 {"support-list", 0xe70000, 0x10000},
2500 {"profile", 0xe80000, 0x10000},
2501 {"default-config", 0xe90000, 0x10000},
2502 {"user-config", 0xea0000, 0x40000},
2503 {"qos-db", 0xee0000, 0x40000},
2504 {"certificate", 0xf20000, 0x10000},
2505 {"usb-config", 0xfb0000, 0x10000},
2506 {"log", 0xfc0000, 0x20000},
2507 {"radio-bk", 0xfe0000, 0x10000},
2508 {"radio", 0xff0000, 0x10000},
2512 .first_sysupgrade_partition
= "os-image",
2513 .last_sysupgrade_partition
= "file-system",
2516 /** Firmware layout for the RE200 v2 */
2522 "{product_name:RE200,product_ver:2.0.0,special_id:00000000}\n"
2523 "{product_name:RE200,product_ver:2.0.0,special_id:41520000}\n"
2524 "{product_name:RE200,product_ver:2.0.0,special_id:41550000}\n"
2525 "{product_name:RE200,product_ver:2.0.0,special_id:42520000}\n"
2526 "{product_name:RE200,product_ver:2.0.0,special_id:43410000}\n"
2527 "{product_name:RE200,product_ver:2.0.0,special_id:45530000}\n"
2528 "{product_name:RE200,product_ver:2.0.0,special_id:45550000}\n"
2529 "{product_name:RE200,product_ver:2.0.0,special_id:49440000}\n"
2530 "{product_name:RE200,product_ver:2.0.0,special_id:4a500000}\n"
2531 "{product_name:RE200,product_ver:2.0.0,special_id:4b520000}\n"
2532 "{product_name:RE200,product_ver:2.0.0,special_id:52550000}\n"
2533 "{product_name:RE200,product_ver:2.0.0,special_id:54570000}\n"
2534 "{product_name:RE200,product_ver:2.0.0,special_id:55530000}\n",
2536 .soft_ver
= SOFT_VER_DEFAULT
,
2539 {"fs-uboot", 0x00000, 0x20000},
2540 {"firmware", 0x20000, 0x7a0000},
2541 {"partition-table", 0x7c0000, 0x02000},
2542 {"default-mac", 0x7c2000, 0x00020},
2543 {"pin", 0x7c2100, 0x00020},
2544 {"product-info", 0x7c3100, 0x01000},
2545 {"soft-version", 0x7c4200, 0x01000},
2546 {"support-list", 0x7c5200, 0x01000},
2547 {"profile", 0x7c6200, 0x08000},
2548 {"config-info", 0x7ce200, 0x00400},
2549 {"user-config", 0x7d0000, 0x10000},
2550 {"default-config", 0x7e0000, 0x10000},
2551 {"radio", 0x7f0000, 0x10000},
2555 .first_sysupgrade_partition
= "os-image",
2556 .last_sysupgrade_partition
= "file-system"
2559 /** Firmware layout for the RE200 v3 */
2565 "{product_name:RE200,product_ver:3.0.0,special_id:00000000}\n"
2566 "{product_name:RE200,product_ver:3.0.0,special_id:41520000}\n"
2567 "{product_name:RE200,product_ver:3.0.0,special_id:41550000}\n"
2568 "{product_name:RE200,product_ver:3.0.0,special_id:42520000}\n"
2569 "{product_name:RE200,product_ver:3.0.0,special_id:43410000}\n"
2570 "{product_name:RE200,product_ver:3.0.0,special_id:45470000}\n"
2571 "{product_name:RE200,product_ver:3.0.0,special_id:45530000}\n"
2572 "{product_name:RE200,product_ver:3.0.0,special_id:45550000}\n"
2573 "{product_name:RE200,product_ver:3.0.0,special_id:49440000}\n"
2574 "{product_name:RE200,product_ver:3.0.0,special_id:4A500000}\n"
2575 "{product_name:RE200,product_ver:3.0.0,special_id:4B520000}\n"
2576 "{product_name:RE200,product_ver:3.0.0,special_id:52550000}\n"
2577 "{product_name:RE200,product_ver:3.0.0,special_id:54570000}\n"
2578 "{product_name:RE200,product_ver:3.0.0,special_id:55530000}\n",
2580 .soft_ver
= SOFT_VER_DEFAULT
,
2583 {"fs-uboot", 0x00000, 0x20000},
2584 {"firmware", 0x20000, 0x7a0000},
2585 {"partition-table", 0x7c0000, 0x02000},
2586 {"default-mac", 0x7c2000, 0x00020},
2587 {"pin", 0x7c2100, 0x00020},
2588 {"product-info", 0x7c3100, 0x01000},
2589 {"soft-version", 0x7c4200, 0x01000},
2590 {"support-list", 0x7c5200, 0x01000},
2591 {"profile", 0x7c6200, 0x08000},
2592 {"config-info", 0x7ce200, 0x00400},
2593 {"user-config", 0x7d0000, 0x10000},
2594 {"default-config", 0x7e0000, 0x10000},
2595 {"radio", 0x7f0000, 0x10000},
2599 .first_sysupgrade_partition
= "os-image",
2600 .last_sysupgrade_partition
= "file-system"
2603 /** Firmware layout for the RE200 v4 */
2609 "{product_name:RE200,product_ver:4.0.0,special_id:00000000}\n"
2610 "{product_name:RE200,product_ver:4.0.0,special_id:45550000}\n"
2611 "{product_name:RE200,product_ver:4.0.0,special_id:4A500000}\n"
2612 "{product_name:RE200,product_ver:4.0.0,special_id:4B520000}\n"
2613 "{product_name:RE200,product_ver:4.0.0,special_id:43410000}\n"
2614 "{product_name:RE200,product_ver:4.0.0,special_id:41550000}\n"
2615 "{product_name:RE200,product_ver:4.0.0,special_id:42520000}\n"
2616 "{product_name:RE200,product_ver:4.0.0,special_id:55530000}\n"
2617 "{product_name:RE200,product_ver:4.0.0,special_id:41520000}\n"
2618 "{product_name:RE200,product_ver:4.0.0,special_id:52550000}\n"
2619 "{product_name:RE200,product_ver:4.0.0,special_id:54570000}\n"
2620 "{product_name:RE200,product_ver:4.0.0,special_id:45530000}\n"
2621 "{product_name:RE200,product_ver:4.0.0,special_id:49440000}\n"
2622 "{product_name:RE200,product_ver:4.0.0,special_id:45470000}\n",
2624 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.1.0\n"),
2627 {"fs-uboot", 0x00000, 0x20000},
2628 {"firmware", 0x20000, 0x7a0000},
2629 {"partition-table", 0x7c0000, 0x02000},
2630 {"default-mac", 0x7c2000, 0x00020},
2631 {"pin", 0x7c2100, 0x00020},
2632 {"product-info", 0x7c3100, 0x01000},
2633 {"soft-version", 0x7c4200, 0x01000},
2634 {"support-list", 0x7c5200, 0x01000},
2635 {"profile", 0x7c6200, 0x08000},
2636 {"config-info", 0x7ce200, 0x00400},
2637 {"user-config", 0x7d0000, 0x10000},
2638 {"default-config", 0x7e0000, 0x10000},
2639 {"radio", 0x7f0000, 0x10000},
2643 .first_sysupgrade_partition
= "os-image",
2644 .last_sysupgrade_partition
= "file-system"
2647 /** Firmware layout for the RE220 v2 */
2653 "{product_name:RE220,product_ver:2.0.0,special_id:00000000}\n"
2654 "{product_name:RE220,product_ver:2.0.0,special_id:41520000}\n"
2655 "{product_name:RE220,product_ver:2.0.0,special_id:41550000}\n"
2656 "{product_name:RE220,product_ver:2.0.0,special_id:42520000}\n"
2657 "{product_name:RE220,product_ver:2.0.0,special_id:43410000}\n"
2658 "{product_name:RE220,product_ver:2.0.0,special_id:45530000}\n"
2659 "{product_name:RE220,product_ver:2.0.0,special_id:45550000}\n"
2660 "{product_name:RE220,product_ver:2.0.0,special_id:49440000}\n"
2661 "{product_name:RE220,product_ver:2.0.0,special_id:4a500000}\n"
2662 "{product_name:RE220,product_ver:2.0.0,special_id:4b520000}\n"
2663 "{product_name:RE220,product_ver:2.0.0,special_id:52550000}\n"
2664 "{product_name:RE220,product_ver:2.0.0,special_id:54570000}\n"
2665 "{product_name:RE220,product_ver:2.0.0,special_id:55530000}\n",
2667 .soft_ver
= SOFT_VER_DEFAULT
,
2670 {"fs-uboot", 0x00000, 0x20000},
2671 {"firmware", 0x20000, 0x7a0000},
2672 {"partition-table", 0x7c0000, 0x02000},
2673 {"default-mac", 0x7c2000, 0x00020},
2674 {"pin", 0x7c2100, 0x00020},
2675 {"product-info", 0x7c3100, 0x01000},
2676 {"soft-version", 0x7c4200, 0x01000},
2677 {"support-list", 0x7c5200, 0x01000},
2678 {"profile", 0x7c6200, 0x08000},
2679 {"config-info", 0x7ce200, 0x00400},
2680 {"user-config", 0x7d0000, 0x10000},
2681 {"default-config", 0x7e0000, 0x10000},
2682 {"radio", 0x7f0000, 0x10000},
2686 .first_sysupgrade_partition
= "os-image",
2687 .last_sysupgrade_partition
= "file-system"
2690 /** Firmware layout for the RE305 v1 */
2696 "{product_name:RE305,product_ver:1.0.0,special_id:45550000}\n"
2697 "{product_name:RE305,product_ver:1.0.0,special_id:55530000}\n"
2698 "{product_name:RE305,product_ver:1.0.0,special_id:4a500000}\n"
2699 "{product_name:RE305,product_ver:1.0.0,special_id:42520000}\n"
2700 "{product_name:RE305,product_ver:1.0.0,special_id:4b520000}\n"
2701 "{product_name:RE305,product_ver:1.0.0,special_id:41550000}\n"
2702 "{product_name:RE305,product_ver:1.0.0,special_id:43410000}\n",
2704 .soft_ver
= SOFT_VER_DEFAULT
,
2707 {"fs-uboot", 0x00000, 0x20000},
2708 {"firmware", 0x20000, 0x5e0000},
2709 {"partition-table", 0x600000, 0x02000},
2710 {"default-mac", 0x610000, 0x00020},
2711 {"pin", 0x610100, 0x00020},
2712 {"product-info", 0x611100, 0x01000},
2713 {"soft-version", 0x620000, 0x01000},
2714 {"support-list", 0x621000, 0x01000},
2715 {"profile", 0x622000, 0x08000},
2716 {"user-config", 0x630000, 0x10000},
2717 {"default-config", 0x640000, 0x10000},
2718 {"radio", 0x7f0000, 0x10000},
2722 .first_sysupgrade_partition
= "os-image",
2723 .last_sysupgrade_partition
= "file-system"
2726 /** Firmware layout for the RE305 v3 */
2732 "{product_name:RE305,product_ver:3.0.0,special_id:00000000}\n"
2733 "{product_name:RE305,product_ver:3.0.0,special_id:45550000}\n"
2734 "{product_name:RE305,product_ver:3.0.0,special_id:4A500000}\n"
2735 "{product_name:RE305,product_ver:3.0.0,special_id:4B520000}\n"
2736 "{product_name:RE305,product_ver:3.0.0,special_id:41550000}\n"
2737 "{product_name:RE305,product_ver:3.0.0,special_id:42520000}\n"
2738 "{product_name:RE305,product_ver:3.0.0,special_id:55530000}\n"
2739 "{product_name:RE305,product_ver:3.0.0,special_id:45530000}\n"
2740 "{product_name:RE305,product_ver:3.0.0,special_id:41530000}\n"
2741 "{product_name:RE305,product_ver:3.0.0,special_id:43410000}\n"
2742 "{product_name:RE305,product_ver:3.0.0,special_id:52550000}\n",
2744 .soft_ver
= SOFT_VER_TEXT("soft_ver:2.0.0\n"),
2747 {"fs-uboot", 0x00000, 0x20000},
2748 {"firmware", 0x20000, 0x7a0000},
2749 {"partition-table", 0x7c0000, 0x02000},
2750 {"default-mac", 0x7c2000, 0x00020},
2751 {"pin", 0x7c2100, 0x00020},
2752 {"product-info", 0x7c3100, 0x01000},
2753 {"soft-version", 0x7c4200, 0x01000},
2754 {"support-list", 0x7c5200, 0x01000},
2755 {"profile", 0x7c6200, 0x08000},
2756 {"config-info", 0x7ce200, 0x00400},
2757 {"user-config", 0x7d0000, 0x10000},
2758 {"default-config", 0x7e0000, 0x10000},
2759 {"radio", 0x7f0000, 0x10000},
2763 .first_sysupgrade_partition
= "os-image",
2764 .last_sysupgrade_partition
= "file-system"
2767 /** Firmware layout for the RE350 v1 */
2773 "{product_name:RE350,product_ver:1.0.0,special_id:45550000}\n"
2774 "{product_name:RE350,product_ver:1.0.0,special_id:00000000}\n"
2775 "{product_name:RE350,product_ver:1.0.0,special_id:41550000}\n"
2776 "{product_name:RE350,product_ver:1.0.0,special_id:55530000}\n"
2777 "{product_name:RE350,product_ver:1.0.0,special_id:43410000}\n"
2778 "{product_name:RE350,product_ver:1.0.0,special_id:4b520000}\n"
2779 "{product_name:RE350,product_ver:1.0.0,special_id:4a500000}\n",
2781 .soft_ver
= SOFT_VER_DEFAULT
,
2783 /** We're using a dynamic kernel/rootfs split here */
2785 {"fs-uboot", 0x00000, 0x20000},
2786 {"firmware", 0x20000, 0x5e0000},
2787 {"partition-table", 0x600000, 0x02000},
2788 {"default-mac", 0x610000, 0x00020},
2789 {"pin", 0x610100, 0x00020},
2790 {"product-info", 0x611100, 0x01000},
2791 {"soft-version", 0x620000, 0x01000},
2792 {"support-list", 0x621000, 0x01000},
2793 {"profile", 0x622000, 0x08000},
2794 {"user-config", 0x630000, 0x10000},
2795 {"default-config", 0x640000, 0x10000},
2796 {"radio", 0x7f0000, 0x10000},
2800 .first_sysupgrade_partition
= "os-image",
2801 .last_sysupgrade_partition
= "file-system"
2804 /** Firmware layout for the RE350K v1 */
2810 "{product_name:RE350K,product_ver:1.0.0,special_id:00000000,product_region:US}\n",
2812 .soft_ver
= SOFT_VER_DEFAULT
,
2814 /** We're using a dynamic kernel/rootfs split here */
2816 {"fs-uboot", 0x00000, 0x20000},
2817 {"firmware", 0x20000, 0xd70000},
2818 {"partition-table", 0xd90000, 0x02000},
2819 {"default-mac", 0xda0000, 0x00020},
2820 {"pin", 0xda0100, 0x00020},
2821 {"product-info", 0xda1100, 0x01000},
2822 {"soft-version", 0xdb0000, 0x01000},
2823 {"support-list", 0xdb1000, 0x01000},
2824 {"profile", 0xdb2000, 0x08000},
2825 {"user-config", 0xdc0000, 0x10000},
2826 {"default-config", 0xdd0000, 0x10000},
2827 {"device-id", 0xde0000, 0x00108},
2828 {"radio", 0xff0000, 0x10000},
2832 .first_sysupgrade_partition
= "os-image",
2833 .last_sysupgrade_partition
= "file-system"
2836 /** Firmware layout for the RE355 */
2842 "{product_name:RE355,product_ver:1.0.0,special_id:00000000}\r\n"
2843 "{product_name:RE355,product_ver:1.0.0,special_id:55530000}\r\n"
2844 "{product_name:RE355,product_ver:1.0.0,special_id:45550000}\r\n"
2845 "{product_name:RE355,product_ver:1.0.0,special_id:4A500000}\r\n"
2846 "{product_name:RE355,product_ver:1.0.0,special_id:43410000}\r\n"
2847 "{product_name:RE355,product_ver:1.0.0,special_id:41550000}\r\n"
2848 "{product_name:RE355,product_ver:1.0.0,special_id:4B520000}\r\n"
2849 "{product_name:RE355,product_ver:1.0.0,special_id:55534100}\r\n",
2851 .soft_ver
= SOFT_VER_DEFAULT
,
2853 /* We're using a dynamic kernel/rootfs split here */
2855 {"fs-uboot", 0x00000, 0x20000},
2856 {"firmware", 0x20000, 0x5e0000},
2857 {"partition-table", 0x600000, 0x02000},
2858 {"default-mac", 0x610000, 0x00020},
2859 {"pin", 0x610100, 0x00020},
2860 {"product-info", 0x611100, 0x01000},
2861 {"soft-version", 0x620000, 0x01000},
2862 {"support-list", 0x621000, 0x01000},
2863 {"profile", 0x622000, 0x08000},
2864 {"user-config", 0x630000, 0x10000},
2865 {"default-config", 0x640000, 0x10000},
2866 {"radio", 0x7f0000, 0x10000},
2870 .first_sysupgrade_partition
= "os-image",
2871 .last_sysupgrade_partition
= "file-system"
2874 /** Firmware layout for the RE450 */
2880 "{product_name:RE450,product_ver:1.0.0,special_id:00000000}\r\n"
2881 "{product_name:RE450,product_ver:1.0.0,special_id:55530000}\r\n"
2882 "{product_name:RE450,product_ver:1.0.0,special_id:45550000}\r\n"
2883 "{product_name:RE450,product_ver:1.0.0,special_id:4A500000}\r\n"
2884 "{product_name:RE450,product_ver:1.0.0,special_id:43410000}\r\n"
2885 "{product_name:RE450,product_ver:1.0.0,special_id:41550000}\r\n"
2886 "{product_name:RE450,product_ver:1.0.0,special_id:4B520000}\r\n"
2887 "{product_name:RE450,product_ver:1.0.0,special_id:55534100}\r\n",
2889 .soft_ver
= SOFT_VER_DEFAULT
,
2891 /** We're using a dynamic kernel/rootfs split here */
2893 {"fs-uboot", 0x00000, 0x20000},
2894 {"firmware", 0x20000, 0x5e0000},
2895 {"partition-table", 0x600000, 0x02000},
2896 {"default-mac", 0x610000, 0x00020},
2897 {"pin", 0x610100, 0x00020},
2898 {"product-info", 0x611100, 0x01000},
2899 {"soft-version", 0x620000, 0x01000},
2900 {"support-list", 0x621000, 0x01000},
2901 {"profile", 0x622000, 0x08000},
2902 {"user-config", 0x630000, 0x10000},
2903 {"default-config", 0x640000, 0x10000},
2904 {"radio", 0x7f0000, 0x10000},
2908 .first_sysupgrade_partition
= "os-image",
2909 .last_sysupgrade_partition
= "file-system"
2912 /** Firmware layout for the RE450 v2 */
2918 "{product_name:RE450,product_ver:2.0.0,special_id:00000000}\r\n"
2919 "{product_name:RE450,product_ver:2.0.0,special_id:55530000}\r\n"
2920 "{product_name:RE450,product_ver:2.0.0,special_id:45550000}\r\n"
2921 "{product_name:RE450,product_ver:2.0.0,special_id:4A500000}\r\n"
2922 "{product_name:RE450,product_ver:2.0.0,special_id:43410000}\r\n"
2923 "{product_name:RE450,product_ver:2.0.0,special_id:41550000}\r\n"
2924 "{product_name:RE450,product_ver:2.0.0,special_id:41530000}\r\n"
2925 "{product_name:RE450,product_ver:2.0.0,special_id:4B520000}\r\n"
2926 "{product_name:RE450,product_ver:2.0.0,special_id:42520000}\r\n",
2928 .soft_ver
= SOFT_VER_DEFAULT
,
2930 /* We're using a dynamic kernel/rootfs split here */
2932 {"fs-uboot", 0x00000, 0x20000},
2933 {"firmware", 0x20000, 0x5e0000},
2934 {"partition-table", 0x600000, 0x02000},
2935 {"default-mac", 0x610000, 0x00020},
2936 {"pin", 0x610100, 0x00020},
2937 {"product-info", 0x611100, 0x01000},
2938 {"soft-version", 0x620000, 0x01000},
2939 {"support-list", 0x621000, 0x01000},
2940 {"profile", 0x622000, 0x08000},
2941 {"user-config", 0x630000, 0x10000},
2942 {"default-config", 0x640000, 0x10000},
2943 {"radio", 0x7f0000, 0x10000},
2947 .first_sysupgrade_partition
= "os-image",
2948 .last_sysupgrade_partition
= "file-system"
2951 /** Firmware layout for the RE450 v3 */
2957 "{product_name:RE450,product_ver:3.0.0,special_id:00000000}\r\n"
2958 "{product_name:RE450,product_ver:3.0.0,special_id:55530000}\r\n"
2959 "{product_name:RE450,product_ver:3.0.0,special_id:45550000}\r\n"
2960 "{product_name:RE450,product_ver:3.0.0,special_id:4A500000}\r\n"
2961 "{product_name:RE450,product_ver:3.0.0,special_id:43410000}\r\n"
2962 "{product_name:RE450,product_ver:3.0.0,special_id:41550000}\r\n"
2963 "{product_name:RE450,product_ver:3.0.0,special_id:41530000}\r\n"
2964 "{product_name:RE450,product_ver:3.0.0,special_id:4B520000}\r\n"
2965 "{product_name:RE450,product_ver:3.0.0,special_id:42520000}\r\n",
2967 .soft_ver
= SOFT_VER_DEFAULT
,
2969 /* We're using a dynamic kernel/rootfs split here */
2971 {"fs-uboot", 0x00000, 0x20000},
2972 {"default-mac", 0x20000, 0x00020},
2973 {"pin", 0x20020, 0x00020},
2974 {"product-info", 0x21000, 0x01000},
2975 {"partition-table", 0x22000, 0x02000},
2976 {"soft-version", 0x24000, 0x01000},
2977 {"support-list", 0x25000, 0x01000},
2978 {"profile", 0x26000, 0x08000},
2979 {"user-config", 0x2e000, 0x10000},
2980 {"default-config", 0x3e000, 0x10000},
2981 {"config-info", 0x4e000, 0x00400},
2982 {"firmware", 0x50000, 0x7a0000},
2983 {"radio", 0x7f0000, 0x10000},
2987 .first_sysupgrade_partition
= "os-image",
2988 .last_sysupgrade_partition
= "file-system"
2991 /** Firmware layout for the RE455 v1 */
2997 "{product_name:RE455,product_ver:1.0.0,special_id:00000000}\r\n"
2998 "{product_name:RE455,product_ver:1.0.0,special_id:55530000}\r\n"
2999 "{product_name:RE455,product_ver:1.0.0,special_id:45550000}\r\n"
3000 "{product_name:RE455,product_ver:1.0.0,special_id:4A500000}\r\n"
3001 "{product_name:RE455,product_ver:1.0.0,special_id:43410000}\r\n"
3002 "{product_name:RE455,product_ver:1.0.0,special_id:41550000}\r\n"
3003 "{product_name:RE455,product_ver:1.0.0,special_id:41530000}\r\n"
3004 "{product_name:RE455,product_ver:1.0.0,special_id:4B520000}\r\n"
3005 "{product_name:RE455,product_ver:1.0.0,special_id:42520000}\r\n",
3007 .soft_ver
= SOFT_VER_DEFAULT
,
3009 /* We're using a dynamic kernel/rootfs split here */
3011 {"fs-uboot", 0x00000, 0x20000},
3012 {"default-mac", 0x20000, 0x00020},
3013 {"pin", 0x20020, 0x00020},
3014 {"product-info", 0x21000, 0x01000},
3015 {"partition-table", 0x22000, 0x02000},
3016 {"soft-version", 0x24000, 0x01000},
3017 {"support-list", 0x25000, 0x01000},
3018 {"profile", 0x26000, 0x08000},
3019 {"user-config", 0x2e000, 0x10000},
3020 {"default-config", 0x3e000, 0x10000},
3021 {"config-info", 0x4e000, 0x00400},
3022 {"firmware", 0x50000, 0x7a0000},
3023 {"radio", 0x7f0000, 0x10000},
3027 .first_sysupgrade_partition
= "os-image",
3028 .last_sysupgrade_partition
= "file-system"
3031 /** Firmware layout for the RE500 */
3037 "{product_name:RE500,product_ver:1.0.0,special_id:00000000}\r\n"
3038 "{product_name:RE500,product_ver:1.0.0,special_id:55530000}\r\n"
3039 "{product_name:RE500,product_ver:1.0.0,special_id:45550000}\r\n"
3040 "{product_name:RE500,product_ver:1.0.0,special_id:4A500000}\r\n"
3041 "{product_name:RE500,product_ver:1.0.0,special_id:43410000}\r\n"
3042 "{product_name:RE500,product_ver:1.0.0,special_id:41550000}\r\n"
3043 "{product_name:RE500,product_ver:1.0.0,special_id:41530000}\r\n",
3045 .soft_ver
= SOFT_VER_DEFAULT
,
3047 /* We're using a dynamic kernel/rootfs split here */
3049 {"fs-uboot", 0x00000, 0x20000},
3050 {"firmware", 0x20000, 0xde0000},
3051 {"partition-table", 0xe00000, 0x02000},
3052 {"default-mac", 0xe10000, 0x00020},
3053 {"pin", 0xe10100, 0x00020},
3054 {"product-info", 0xe11100, 0x01000},
3055 {"soft-version", 0xe20000, 0x01000},
3056 {"support-list", 0xe21000, 0x01000},
3057 {"profile", 0xe22000, 0x08000},
3058 {"user-config", 0xe30000, 0x10000},
3059 {"default-config", 0xe40000, 0x10000},
3060 {"radio", 0xff0000, 0x10000},
3064 .first_sysupgrade_partition
= "os-image",
3065 .last_sysupgrade_partition
= "file-system"
3068 /** Firmware layout for the RE650 */
3074 "{product_name:RE650,product_ver:1.0.0,special_id:00000000}\r\n"
3075 "{product_name:RE650,product_ver:1.0.0,special_id:55530000}\r\n"
3076 "{product_name:RE650,product_ver:1.0.0,special_id:45550000}\r\n"
3077 "{product_name:RE650,product_ver:1.0.0,special_id:4A500000}\r\n"
3078 "{product_name:RE650,product_ver:1.0.0,special_id:43410000}\r\n"
3079 "{product_name:RE650,product_ver:1.0.0,special_id:41550000}\r\n"
3080 "{product_name:RE650,product_ver:1.0.0,special_id:41530000}\r\n",
3082 .soft_ver
= SOFT_VER_DEFAULT
,
3084 /* We're using a dynamic kernel/rootfs split here */
3086 {"fs-uboot", 0x00000, 0x20000},
3087 {"firmware", 0x20000, 0xde0000},
3088 {"partition-table", 0xe00000, 0x02000},
3089 {"default-mac", 0xe10000, 0x00020},
3090 {"pin", 0xe10100, 0x00020},
3091 {"product-info", 0xe11100, 0x01000},
3092 {"soft-version", 0xe20000, 0x01000},
3093 {"support-list", 0xe21000, 0x01000},
3094 {"profile", 0xe22000, 0x08000},
3095 {"user-config", 0xe30000, 0x10000},
3096 {"default-config", 0xe40000, 0x10000},
3097 {"radio", 0xff0000, 0x10000},
3101 .first_sysupgrade_partition
= "os-image",
3102 .last_sysupgrade_partition
= "file-system"
3104 /** Firmware layout for the RE650 V2 (8MB Flash)*/
3110 "{product_name:RE650,product_ver:2.0.0,special_id:00000000}\n"
3111 "{product_name:RE650,product_ver:2.0.0,special_id:45550000}\n"
3112 "{product_name:RE650,product_ver:2.0.0,special_id:4A500000}\n"
3113 "{product_name:RE650,product_ver:2.0.0,special_id:41550000}\n"
3114 "{product_name:RE650,product_ver:2.0.0,special_id:43410000}\n"
3115 "{product_name:RE650,product_ver:2.0.0,special_id:41530000}\n"
3116 "{product_name:RE650,product_ver:2.0.0,special_id:55530000}\n",
3118 /* For RE650 v2, soft ver is required, otherwise OEM install doesn't work */
3119 .soft_ver
= SOFT_VER_TEXT("soft_ver:2.0.0\n"),
3121 /* We're using a dynamic kernel/rootfs split here */
3123 {"fs-uboot", 0x00000, 0x20000},
3124 {"firmware", 0x20000, 0x7a0000},
3125 {"partition-table", 0x7c0000, 0x02000},
3126 {"default-mac", 0x7c2000, 0x00020},
3127 {"pin", 0x7c2100, 0x00020},
3128 {"product-info", 0x7c3100, 0x01000},
3129 {"soft-version", 0x7c4200, 0x01000},
3130 {"support-list", 0x7c5200, 0x01000},
3131 {"profile", 0x7c6200, 0x08000},
3132 {"config-info", 0x7ce200, 0x00400},
3133 {"user-config", 0x7d0000, 0x10000},
3134 {"default-config", 0x7e0000, 0x10000},
3135 {"radio", 0x7f0000, 0x10000},
3139 .first_sysupgrade_partition
= "os-image",
3140 .last_sysupgrade_partition
= "file-system"
3143 /** Firmware layout for the Mercusys MR70X */
3149 "{product_name:MR70X,product_ver:1.0.0,special_id:45550000}\n"
3150 "{product_name:MR70X,product_ver:1.0.0,special_id:4A500000}\n"
3151 "{product_name:MR70X,product_ver:1.0.0,special_id:55530000}\n",
3153 .soft_ver
= SOFT_VER_DEFAULT
,
3156 {"fs-uboot", 0x00000, 0x40000},
3157 {"firmware", 0x40000, 0xf60000},
3158 {"default-mac", 0xfa0000, 0x00200},
3159 {"pin", 0xfa0200, 0x00100},
3160 {"device-id", 0xfa0300, 0x00100},
3161 {"product-info", 0xfa0400, 0x0fc00},
3162 {"default-config", 0xfb0000, 0x08000},
3163 {"ap-def-config", 0xfb8000, 0x08000},
3164 {"user-config", 0xfc0000, 0x0a000},
3165 {"ag-config", 0xfca000, 0x04000},
3166 {"certificate", 0xfce000, 0x02000},
3167 {"ap-config", 0xfd0000, 0x06000},
3168 {"router-config", 0xfd6000, 0x06000},
3169 {"favicon", 0xfdc000, 0x02000},
3170 {"logo", 0xfde000, 0x02000},
3171 {"partition-table", 0xfe0000, 0x00800},
3172 {"soft-version", 0xfe0800, 0x00100},
3173 {"support-list", 0xfe0900, 0x00200},
3174 {"profile", 0xfe0b00, 0x03000},
3175 {"extra-para", 0xfe3b00, 0x00100},
3176 {"radio", 0xff0000, 0x10000},
3180 .first_sysupgrade_partition
= "os-image",
3181 .last_sysupgrade_partition
= "file-system"
3187 #define error(_ret, _errno, _str, ...) \
3189 fprintf(stderr, _str ": %s\n", ## __VA_ARGS__, \
3190 strerror(_errno)); \
3196 /** Stores a uint32 as big endian */
3197 static inline void put32(uint8_t *buf
, uint32_t val
) {
3204 static inline bool meta_partition_should_pad(enum partition_trail_value pv
)
3206 return (pv
>= 0) && (pv
<= PART_TRAIL_MAX
);
3209 /** Allocate a padded meta partition with a correctly initialised header
3210 * If the `data` pointer is NULL, then the required space is only allocated,
3211 * otherwise `data_len` bytes will be copied from `data` into the partition
3213 static struct image_partition_entry
init_meta_partition_entry(
3214 const char *name
, const void *data
, uint32_t data_len
,
3215 enum partition_trail_value pad_value
)
3217 uint32_t total_len
= sizeof(struct meta_header
) + data_len
;
3218 if (meta_partition_should_pad(pad_value
))
3221 struct image_partition_entry entry
= {
3224 .data
= malloc(total_len
)
3227 error(1, errno
, "failed to allocate meta partition entry");
3229 struct meta_header
*header
= (struct meta_header
*)entry
.data
;
3230 header
->length
= htonl(data_len
);
3234 memcpy(entry
.data
+sizeof(*header
), data
, data_len
);
3236 if (meta_partition_should_pad(pad_value
))
3237 entry
.data
[total_len
- 1] = (uint8_t) pad_value
;
3242 /** Allocates a new image partition */
3243 static struct image_partition_entry
alloc_image_partition(const char *name
, size_t len
) {
3244 struct image_partition_entry entry
= {name
, len
, malloc(len
)};
3246 error(1, errno
, "malloc");
3251 /** Sets up default partition names whenever custom names aren't specified */
3252 static void set_partition_names(struct device_info
*info
)
3254 if (!info
->partition_names
.partition_table
)
3255 info
->partition_names
.partition_table
= "partition-table";
3256 if (!info
->partition_names
.soft_ver
)
3257 info
->partition_names
.soft_ver
= "soft-version";
3258 if (!info
->partition_names
.os_image
)
3259 info
->partition_names
.os_image
= "os-image";
3260 if (!info
->partition_names
.support_list
)
3261 info
->partition_names
.support_list
= "support-list";
3262 if (!info
->partition_names
.file_system
)
3263 info
->partition_names
.file_system
= "file-system";
3264 if (!info
->partition_names
.extra_para
)
3265 info
->partition_names
.extra_para
= "extra-para";
3268 /** Frees an image partition */
3269 static void free_image_partition(struct image_partition_entry
*entry
)
3271 void *data
= entry
->data
;
3280 static time_t source_date_epoch
= -1;
3281 static void set_source_date_epoch() {
3282 char *env
= getenv("SOURCE_DATE_EPOCH");
3286 source_date_epoch
= strtoull(env
, &endptr
, 10);
3287 if (errno
|| (endptr
&& *endptr
!= '\0')) {
3288 fprintf(stderr
, "Invalid SOURCE_DATE_EPOCH");
3294 /** Generates the partition-table partition */
3295 static struct image_partition_entry
make_partition_table(const struct device_info
*p
)
3297 struct image_partition_entry entry
= alloc_image_partition(p
->partition_names
.partition_table
, SAFELOADER_PAYLOAD_TABLE_SIZE
);
3299 char *s
= (char *)entry
.data
, *end
= (char *)(s
+entry
.size
);
3307 for (i
= 0; p
->partitions
[i
].name
; i
++) {
3309 size_t w
= snprintf(s
, len
, "partition %s base 0x%05x size 0x%05x\n",
3310 p
->partitions
[i
].name
, p
->partitions
[i
].base
, p
->partitions
[i
].size
);
3313 error(1, 0, "flash partition table overflow?");
3320 memset(s
, 0xff, end
-s
);
3326 /** Generates a binary-coded decimal representation of an integer in the range [0, 99] */
3327 static inline uint8_t bcd(uint8_t v
) {
3328 return 0x10 * (v
/10) + v
%10;
3332 /** Generates the soft-version partition */
3333 static struct image_partition_entry
make_soft_version(const struct device_info
*info
, uint32_t rev
)
3335 /** If an info string is provided, use this instead of
3336 * the structured data, and include the null-termination */
3337 if (info
->soft_ver
.type
== SOFT_VER_TYPE_TEXT
) {
3338 uint32_t len
= strlen(info
->soft_ver
.text
) + 1;
3339 return init_meta_partition_entry(info
->partition_names
.soft_ver
,
3340 info
->soft_ver
.text
, len
, info
->part_trail
);
3345 if (source_date_epoch
!= -1)
3346 t
= source_date_epoch
;
3347 else if (time(&t
) == (time_t)(-1))
3348 error(1, errno
, "time");
3350 struct tm
*tm
= gmtime(&t
);
3352 struct soft_version s
= {
3355 .version_major
= info
->soft_ver
.num
[0],
3356 .version_minor
= info
->soft_ver
.num
[1],
3357 .version_patch
= info
->soft_ver
.num
[2],
3359 .year_hi
= bcd((1900+tm
->tm_year
)/100),
3360 .year_lo
= bcd(tm
->tm_year
%100),
3361 .month
= bcd(tm
->tm_mon
+1),
3362 .day
= bcd(tm
->tm_mday
),
3365 .compat_level
= htonl(info
->soft_ver_compat_level
)
3368 if (info
->soft_ver_compat_level
== 0)
3369 return init_meta_partition_entry(info
->partition_names
.soft_ver
, &s
,
3370 (uint8_t *)(&s
.compat_level
) - (uint8_t *)(&s
),
3373 return init_meta_partition_entry(info
->partition_names
.soft_ver
, &s
,
3374 sizeof(s
), info
->part_trail
);
3377 /** Generates the support-list partition */
3378 static struct image_partition_entry
make_support_list(
3379 const struct device_info
*info
)
3381 uint32_t len
= strlen(info
->support_list
);
3382 return init_meta_partition_entry(info
->partition_names
.support_list
, info
->support_list
,
3383 len
, info
->part_trail
);
3386 /** Partition with extra-para data */
3387 static struct image_partition_entry
make_extra_para(
3388 const struct device_info
*info
, const uint8_t *extra_para
, size_t len
)
3390 return init_meta_partition_entry(info
->partition_names
.extra_para
, extra_para
, len
,
3394 /** Creates a new image partition with an arbitrary name from a file */
3395 static struct image_partition_entry
read_file(const char *part_name
, const char *filename
, bool add_jffs2_eof
, struct flash_partition_entry
*file_system_partition
) {
3396 struct stat statbuf
;
3398 if (stat(filename
, &statbuf
) < 0)
3399 error(1, errno
, "unable to stat file `%s'", filename
);
3401 size_t len
= statbuf
.st_size
;
3403 if (add_jffs2_eof
) {
3404 if (file_system_partition
)
3405 len
= ALIGN(len
+ file_system_partition
->base
, 0x10000) + sizeof(jffs2_eof_mark
) - file_system_partition
->base
;
3407 len
= ALIGN(len
, 0x10000) + sizeof(jffs2_eof_mark
);
3410 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
3412 FILE *file
= fopen(filename
, "rb");
3414 error(1, errno
, "unable to open file `%s'", filename
);
3416 if (fread(entry
.data
, statbuf
.st_size
, 1, file
) != 1)
3417 error(1, errno
, "unable to read file `%s'", filename
);
3419 if (add_jffs2_eof
) {
3420 uint8_t *eof
= entry
.data
+ statbuf
.st_size
, *end
= entry
.data
+entry
.size
;
3422 memset(eof
, 0xff, end
- eof
- sizeof(jffs2_eof_mark
));
3423 memcpy(end
- sizeof(jffs2_eof_mark
), jffs2_eof_mark
, sizeof(jffs2_eof_mark
));
3432 Copies a list of image partitions into an image buffer and generates the image partition table while doing so
3434 Example image partition table:
3436 fwup-ptn partition-table base 0x00800 size 0x00800
3437 fwup-ptn os-image base 0x01000 size 0x113b45
3438 fwup-ptn file-system base 0x114b45 size 0x1d0004
3439 fwup-ptn support-list base 0x2e4b49 size 0x000d1
3441 Each line of the partition table is terminated with the bytes 09 0d 0a ("\t\r\n"),
3442 the end of the partition table is marked with a zero byte.
3444 The firmware image must contain at least the partition-table and support-list partitions
3445 to be accepted. There aren't any alignment constraints for the image partitions.
3447 The partition-table partition contains the actual flash layout; partitions
3448 from the image partition table are mapped to the corresponding flash partitions during
3449 the firmware upgrade. The support-list partition contains a list of devices supported by
3452 The base offsets in the firmware partition table are relative to the end
3453 of the vendor information block, so the partition-table partition will
3454 actually start at offset 0x1814 of the image.
3456 I think partition-table must be the first partition in the firmware image.
3458 static void put_partitions(uint8_t *buffer
, const struct flash_partition_entry
*flash_parts
, const struct image_partition_entry
*parts
) {
3460 char *image_pt
= (char *)buffer
, *end
= image_pt
+ SAFELOADER_PAYLOAD_TABLE_SIZE
;
3462 size_t base
= SAFELOADER_PAYLOAD_TABLE_SIZE
;
3463 for (i
= 0; parts
[i
].name
; i
++) {
3464 for (j
= 0; flash_parts
[j
].name
; j
++) {
3465 if (!strcmp(flash_parts
[j
].name
, parts
[i
].name
)) {
3466 if (parts
[i
].size
> flash_parts
[j
].size
)
3467 error(1, 0, "%s partition too big (more than %u bytes)", flash_parts
[j
].name
, (unsigned)flash_parts
[j
].size
);
3472 assert(flash_parts
[j
].name
);
3474 memcpy(buffer
+ base
, parts
[i
].data
, parts
[i
].size
);
3476 size_t len
= end
-image_pt
;
3477 size_t w
= snprintf(image_pt
, len
, "fwup-ptn %s base 0x%05x size 0x%05x\t\r\n", parts
[i
].name
, (unsigned)base
, (unsigned)parts
[i
].size
);
3480 error(1, 0, "image partition table overflow?");
3484 base
+= parts
[i
].size
;
3488 /** Generates and writes the image MD5 checksum */
3489 static void put_md5(uint8_t *md5
, uint8_t *buffer
, unsigned int len
) {
3493 MD5_Update(&ctx
, md5_salt
, (unsigned int)sizeof(md5_salt
));
3494 MD5_Update(&ctx
, buffer
, len
);
3495 MD5_Final(md5
, &ctx
);
3500 Generates the firmware image in factory format
3506 0000-0003 Image size (4 bytes, big endian)
3507 0004-0013 MD5 hash (hash of a 16 byte salt and the image data starting with byte 0x14)
3508 0014-0017 Vendor information length (without padding) (4 bytes, big endian)
3509 0018-1013 Vendor information (4092 bytes, padded with 0xff; there seem to be older
3510 (VxWorks-based) TP-LINK devices which use a smaller vendor information block)
3511 1014-1813 Image partition table (2048 bytes, padded with 0xff)
3512 1814-xxxx Firmware partitions
3514 static void * generate_factory_image(struct device_info
*info
, const struct image_partition_entry
*parts
, size_t *len
) {
3515 *len
= SAFELOADER_PAYLOAD_OFFSET
+ SAFELOADER_PAYLOAD_TABLE_SIZE
;
3518 for (i
= 0; parts
[i
].name
; i
++)
3519 *len
+= parts
[i
].size
;
3521 uint8_t *image
= malloc(*len
);
3523 error(1, errno
, "malloc");
3525 memset(image
, 0xff, *len
);
3529 size_t vendor_len
= strlen(info
->vendor
);
3530 put32(image
+ SAFELOADER_PREAMBLE_SIZE
, vendor_len
);
3531 memcpy(image
+ SAFELOADER_PREAMBLE_SIZE
+ 0x4, info
->vendor
, vendor_len
);
3534 put_partitions(image
+ SAFELOADER_PAYLOAD_OFFSET
, info
->partitions
, parts
);
3535 put_md5(image
+ 0x04, image
+ SAFELOADER_PREAMBLE_SIZE
, *len
- SAFELOADER_PREAMBLE_SIZE
);
3541 Generates the firmware image in sysupgrade format
3543 This makes some assumptions about the provided flash and image partition tables and
3544 should be generalized when TP-LINK starts building its safeloader into hardware with
3545 different flash layouts.
3547 static void * generate_sysupgrade_image(struct device_info
*info
, const struct image_partition_entry
*image_parts
, size_t *len
) {
3549 size_t flash_first_partition_index
= 0;
3550 size_t flash_last_partition_index
= 0;
3551 const struct flash_partition_entry
*flash_first_partition
= NULL
;
3552 const struct flash_partition_entry
*flash_last_partition
= NULL
;
3553 const struct image_partition_entry
*image_last_partition
= NULL
;
3555 /** Find first and last partitions */
3556 for (i
= 0; info
->partitions
[i
].name
; i
++) {
3557 if (!strcmp(info
->partitions
[i
].name
, info
->first_sysupgrade_partition
)) {
3558 flash_first_partition
= &info
->partitions
[i
];
3559 flash_first_partition_index
= i
;
3560 } else if (!strcmp(info
->partitions
[i
].name
, info
->last_sysupgrade_partition
)) {
3561 flash_last_partition
= &info
->partitions
[i
];
3562 flash_last_partition_index
= i
;
3566 assert(flash_first_partition
&& flash_last_partition
);
3567 assert(flash_first_partition_index
< flash_last_partition_index
);
3569 /** Find last partition from image to calculate needed size */
3570 for (i
= 0; image_parts
[i
].name
; i
++) {
3571 if (!strcmp(image_parts
[i
].name
, info
->last_sysupgrade_partition
)) {
3572 image_last_partition
= &image_parts
[i
];
3577 assert(image_last_partition
);
3579 *len
= flash_last_partition
->base
- flash_first_partition
->base
+ image_last_partition
->size
;
3581 uint8_t *image
= malloc(*len
);
3583 error(1, errno
, "malloc");
3585 memset(image
, 0xff, *len
);
3587 for (i
= flash_first_partition_index
; i
<= flash_last_partition_index
; i
++) {
3588 for (j
= 0; image_parts
[j
].name
; j
++) {
3589 if (!strcmp(info
->partitions
[i
].name
, image_parts
[j
].name
)) {
3590 if (image_parts
[j
].size
> info
->partitions
[i
].size
)
3591 error(1, 0, "%s partition too big (more than %u bytes)", info
->partitions
[i
].name
, (unsigned)info
->partitions
[i
].size
);
3592 memcpy(image
+ info
->partitions
[i
].base
- flash_first_partition
->base
, image_parts
[j
].data
, image_parts
[j
].size
);
3596 assert(image_parts
[j
].name
);
3603 /** Generates an image according to a given layout and writes it to a file */
3604 static void build_image(const char *output
,
3605 const char *kernel_image
,
3606 const char *rootfs_image
,
3610 struct device_info
*info
) {
3614 struct image_partition_entry parts
[7] = {};
3616 struct flash_partition_entry
*firmware_partition
= NULL
;
3617 struct flash_partition_entry
*os_image_partition
= NULL
;
3618 struct flash_partition_entry
*file_system_partition
= NULL
;
3619 size_t firmware_partition_index
= 0;
3621 set_partition_names(info
);
3623 for (i
= 0; info
->partitions
[i
].name
; i
++) {
3624 if (!strcmp(info
->partitions
[i
].name
, "firmware"))
3626 firmware_partition
= &info
->partitions
[i
];
3627 firmware_partition_index
= i
;
3631 if (firmware_partition
)
3633 os_image_partition
= &info
->partitions
[firmware_partition_index
];
3634 file_system_partition
= &info
->partitions
[firmware_partition_index
+ 1];
3637 if (stat(kernel_image
, &kernel
) < 0)
3638 error(1, errno
, "unable to stat file `%s'", kernel_image
);
3640 if (kernel
.st_size
> firmware_partition
->size
)
3641 error(1, 0, "kernel overflowed firmware partition\n");
3643 for (i
= MAX_PARTITIONS
-1; i
>= firmware_partition_index
+ 1; i
--)
3644 info
->partitions
[i
+1] = info
->partitions
[i
];
3646 file_system_partition
->name
= info
->partition_names
.file_system
;
3648 file_system_partition
->base
= firmware_partition
->base
+ kernel
.st_size
;
3650 /* Align partition start to erase blocks for factory images only */
3652 file_system_partition
->base
= ALIGN(firmware_partition
->base
+ kernel
.st_size
, 0x10000);
3654 file_system_partition
->size
= firmware_partition
->size
- file_system_partition
->base
;
3656 os_image_partition
->name
= info
->partition_names
.os_image
;
3658 os_image_partition
->size
= kernel
.st_size
;
3661 parts
[0] = make_partition_table(info
);
3662 parts
[1] = make_soft_version(info
, rev
);
3663 parts
[2] = make_support_list(info
);
3664 parts
[3] = read_file(info
->partition_names
.os_image
, kernel_image
, false, NULL
);
3665 parts
[4] = read_file(info
->partition_names
.file_system
, rootfs_image
, add_jffs2_eof
, file_system_partition
);
3668 /* Some devices need the extra-para partition to accept the firmware */
3669 if (strcasecmp(info
->id
, "ARCHER-A6-V3") == 0 ||
3670 strcasecmp(info
->id
, "ARCHER-A7-V5") == 0 ||
3671 strcasecmp(info
->id
, "ARCHER-A9-V6") == 0 ||
3672 strcasecmp(info
->id
, "ARCHER-AX23-V1") == 0 ||
3673 strcasecmp(info
->id
, "ARCHER-C2-V3") == 0 ||
3674 strcasecmp(info
->id
, "ARCHER-C7-V4") == 0 ||
3675 strcasecmp(info
->id
, "ARCHER-C7-V5") == 0 ||
3676 strcasecmp(info
->id
, "ARCHER-C25-V1") == 0 ||
3677 strcasecmp(info
->id
, "ARCHER-C59-V2") == 0 ||
3678 strcasecmp(info
->id
, "ARCHER-C60-V2") == 0 ||
3679 strcasecmp(info
->id
, "ARCHER-C60-V3") == 0 ||
3680 strcasecmp(info
->id
, "ARCHER-C6U-V1") == 0 ||
3681 strcasecmp(info
->id
, "ARCHER-C6-V3") == 0 ||
3682 strcasecmp(info
->id
, "DECO-M4R-V4") == 0 ||
3683 strcasecmp(info
->id
, "MR70X") == 0 ||
3684 strcasecmp(info
->id
, "TLWR1043NV5") == 0) {
3685 const uint8_t extra_para
[2] = {0x01, 0x00};
3686 parts
[5] = make_extra_para(info
, extra_para
,
3687 sizeof(extra_para
));
3688 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2") == 0 ||
3689 strcasecmp(info
->id
, "TL-WA1201-V2") == 0) {
3690 const uint8_t extra_para
[2] = {0x00, 0x01};
3691 parts
[5] = make_extra_para(info
, extra_para
,
3692 sizeof(extra_para
));
3693 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2-US") == 0 ||
3694 strcasecmp(info
->id
, "EAP245-V3") == 0) {
3695 const uint8_t extra_para
[2] = {0x01, 0x01};
3696 parts
[5] = make_extra_para(info
, extra_para
,
3697 sizeof(extra_para
));
3703 image
= generate_sysupgrade_image(info
, parts
, &len
);
3705 image
= generate_factory_image(info
, parts
, &len
);
3707 FILE *file
= fopen(output
, "wb");
3709 error(1, errno
, "unable to open output file");
3711 if (fwrite(image
, len
, 1, file
) != 1)
3712 error(1, 0, "unable to write output file");
3718 for (i
= 0; parts
[i
].name
; i
++)
3719 free_image_partition(&parts
[i
]);
3723 static void usage(const char *argv0
) {
3725 "Usage: %s [OPTIONS...]\n"
3728 " -h show this help\n"
3730 "Info about an image:\n"
3731 " -i <file> input file to read from\n"
3732 "Create a new image:\n"
3733 " -B <board> create image for the board specified with <board>\n"
3734 " -k <file> read kernel image from the file <file>\n"
3735 " -r <file> read rootfs image from the file <file>\n"
3736 " -o <file> write output to the file <file>\n"
3737 " -V <rev> sets the revision number to <rev>\n"
3738 " -j add jffs2 end-of-filesystem markers\n"
3739 " -S create sysupgrade instead of factory image\n"
3740 "Extract an old image:\n"
3741 " -x <file> extract all oem firmware partition\n"
3742 " -d <dir> destination to extract the firmware partition\n"
3743 " -z <file> convert an oem firmware into a sysupgade file. Use -o for output file\n",
3749 static struct device_info
*find_board(const char *id
)
3751 struct device_info
*board
= NULL
;
3753 for (board
= boards
; board
->id
!= NULL
; board
++)
3754 if (strcasecmp(id
, board
->id
) == 0)
3760 static int add_flash_partition(
3761 struct flash_partition_entry
*part_list
,
3768 /* check if the list has a free entry */
3769 for (ptr
= 0; ptr
< max_entries
; ptr
++, part_list
++) {
3770 if (part_list
->name
== NULL
&&
3771 part_list
->base
== 0 &&
3772 part_list
->size
== 0)
3776 if (ptr
== max_entries
) {
3777 error(1, 0, "No free flash part entry available.");
3780 part_list
->name
= calloc(1, strlen(name
) + 1);
3781 if (!part_list
->name
) {
3782 error(1, 0, "Unable to allocate memory");
3785 memcpy((char *)part_list
->name
, name
, strlen(name
));
3786 part_list
->base
= base
;
3787 part_list
->size
= size
;
3792 /** read the partition table into struct flash_partition_entry */
3793 enum PARTITION_TABLE_TYPE
{
3794 PARTITION_TABLE_FWUP
,
3795 PARTITION_TABLE_FLASH
,
3798 static int read_partition_table(
3799 FILE *file
, long offset
,
3800 struct flash_partition_entry
*entries
, size_t max_entries
,
3803 char buf
[SAFELOADER_PAYLOAD_TABLE_SIZE
];
3805 const char *parthdr
= NULL
;
3806 const char *fwuphdr
= "fwup-ptn";
3807 const char *flashhdr
= "partition";
3809 /* TODO: search for the partition table */
3812 case PARTITION_TABLE_FWUP
:
3815 case PARTITION_TABLE_FLASH
:
3819 error(1, 0, "Invalid partition table");
3822 if (fseek(file
, offset
, SEEK_SET
) < 0)
3823 error(1, errno
, "Can not seek in the firmware");
3825 if (fread(buf
, sizeof(buf
), 1, file
) != 1)
3826 error(1, errno
, "Can not read fwup-ptn from the firmware");
3828 buf
[sizeof(buf
) - 1] = '\0';
3830 /* look for the partition header */
3831 if (memcmp(buf
, parthdr
, strlen(parthdr
)) != 0) {
3832 fprintf(stderr
, "DEBUG: can not find fwuphdr\n");
3837 end
= buf
+ sizeof(buf
);
3838 while ((ptr
+ strlen(parthdr
)) < end
&&
3839 memcmp(ptr
, parthdr
, strlen(parthdr
)) == 0) {
3843 char name
[32] = { 0 };
3845 unsigned long base
= 0;
3846 unsigned long size
= 0;
3848 end_part
= memchr(ptr
, '\n', (end
- ptr
));
3849 if (end_part
== NULL
) {
3850 /* in theory this should never happen, because a partition always ends with 0x09, 0x0D, 0x0A */
3854 for (int i
= 0; i
<= 4; i
++) {
3855 if (end_part
<= ptr
)
3858 end_element
= memchr(ptr
, 0x20, (end_part
- ptr
));
3859 if (end_element
== NULL
) {
3860 error(1, errno
, "Ignoring the rest of the partition entries.");
3865 /* partition header */
3867 ptr
= end_element
+ 1;
3871 name_len
= (end_element
- ptr
) > 31 ? 31 : (end_element
- ptr
);
3872 strncpy(name
, ptr
, name_len
);
3873 name
[name_len
] = '\0';
3874 ptr
= end_element
+ 1;
3879 ptr
= end_element
+ 1;
3884 base
= strtoul(ptr
, NULL
, 16);
3885 ptr
= end_element
+ 1;
3890 ptr
= end_element
+ 1;
3891 /* actual size. The last element doesn't have a sepeartor */
3892 size
= strtoul(ptr
, NULL
, 16);
3893 /* the part ends with 0x09, 0x0d, 0x0a */
3895 add_flash_partition(entries
, max_entries
, name
, base
, size
);
3904 static void safeloader_read_partition(FILE *input_file
, size_t payload_offset
,
3905 struct flash_partition_entry
*entry
,
3906 struct image_partition_entry
*part
)
3908 size_t part_size
= entry
->size
;
3909 void *part_data
= malloc(part_size
);
3911 if (fseek(input_file
, payload_offset
, SEEK_SET
))
3912 error(1, errno
, "Failed to seek to partition data");
3915 error(1, ENOMEM
, "Failed to allocate partition data");
3917 if (fread(part_data
, 1, part_size
, input_file
) < part_size
)
3918 error(1, errno
, "Failed to read partition data");
3920 part
->data
= part_data
;
3921 part
->size
= part_size
;
3922 part
->name
= entry
->name
;
3925 static void safeloader_parse_image(FILE *input_file
, struct safeloader_image_info
*image
)
3927 static const char *HEADER_ID_CLOUD
= "fw-type:Cloud";
3928 static const char *HEADER_ID_QNEW
= "?NEW";
3935 fseek(input_file
, SAFELOADER_PREAMBLE_SIZE
, SEEK_SET
);
3937 if (fread(buf
, sizeof(buf
), 1, input_file
) != 1)
3938 error(1, errno
, "Can not read image header");
3940 if (memcmp(HEADER_ID_QNEW
, &buf
[0], strlen(HEADER_ID_QNEW
)) == 0)
3941 image
->type
= SAFELOADER_TYPE_QNEW
;
3942 else if (memcmp(HEADER_ID_CLOUD
, &buf
[0], strlen(HEADER_ID_CLOUD
)) == 0)
3943 image
->type
= SAFELOADER_TYPE_CLOUD
;
3944 else if (ntohl(*((uint32_t *) &buf
[0])) <= SAFELOADER_HEADER_SIZE
)
3945 image
->type
= SAFELOADER_TYPE_VENDOR
;
3947 image
->type
= SAFELOADER_TYPE_DEFAULT
;
3949 switch (image
->type
) {
3950 case SAFELOADER_TYPE_DEFAULT
:
3951 case SAFELOADER_TYPE_VENDOR
:
3952 case SAFELOADER_TYPE_CLOUD
:
3953 image
->payload_offset
= SAFELOADER_PAYLOAD_OFFSET
;
3955 case SAFELOADER_TYPE_QNEW
:
3956 image
->payload_offset
= SAFELOADER_QNEW_PAYLOAD_OFFSET
;
3960 /* Parse image partition table */
3961 read_partition_table(input_file
, image
->payload_offset
, &image
->entries
[0],
3962 MAX_PARTITIONS
, PARTITION_TABLE_FWUP
);
3965 static void write_partition(
3967 size_t firmware_offset
,
3968 struct flash_partition_entry
*entry
,
3974 fseek(input_file
, entry
->base
+ firmware_offset
, SEEK_SET
);
3976 for (offset
= 0; sizeof(buf
) + offset
<= entry
->size
; offset
+= sizeof(buf
)) {
3977 if (fread(buf
, sizeof(buf
), 1, input_file
) != 1)
3978 error(1, errno
, "Can not read partition from input_file");
3980 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
3981 error(1, errno
, "Can not write partition to output_file");
3983 /* write last chunk smaller than buffer */
3984 if (offset
< entry
->size
) {
3985 offset
= entry
->size
- offset
;
3986 if (fread(buf
, offset
, 1, input_file
) != 1)
3987 error(1, errno
, "Can not read partition from input_file");
3988 if (fwrite(buf
, offset
, 1, output_file
) != 1)
3989 error(1, errno
, "Can not write partition to output_file");
3993 static int extract_firmware_partition(FILE *input_file
, size_t firmware_offset
, struct flash_partition_entry
*entry
, const char *output_directory
)
3996 char output
[PATH_MAX
];
3998 snprintf(output
, PATH_MAX
, "%s/%s", output_directory
, entry
->name
);
3999 output_file
= fopen(output
, "wb+");
4000 if (output_file
== NULL
) {
4001 error(1, errno
, "Can not open output file %s", output
);
4004 write_partition(input_file
, firmware_offset
, entry
, output_file
);
4006 fclose(output_file
);
4011 /** extract all partitions from the firmware file */
4012 static int extract_firmware(const char *input
, const char *output_directory
)
4014 struct safeloader_image_info info
= {};
4015 struct stat statbuf
;
4018 /* check input file */
4019 if (stat(input
, &statbuf
)) {
4020 error(1, errno
, "Can not read input firmware %s", input
);
4023 /* check if output directory exists */
4024 if (stat(output_directory
, &statbuf
)) {
4025 error(1, errno
, "Failed to stat output directory %s", output_directory
);
4028 if ((statbuf
.st_mode
& S_IFMT
) != S_IFDIR
) {
4029 error(1, errno
, "Given output directory is not a directory %s", output_directory
);
4032 input_file
= fopen(input
, "rb");
4033 safeloader_parse_image(input_file
, &info
);
4035 for (size_t i
= 0; i
< MAX_PARTITIONS
&& info
.entries
[i
].name
; i
++)
4036 extract_firmware_partition(input_file
, info
.payload_offset
, &info
.entries
[i
], output_directory
);
4041 static struct flash_partition_entry
*find_partition(
4042 struct flash_partition_entry
*entries
, size_t max_entries
,
4043 const char *name
, const char *error_msg
)
4045 for (size_t i
= 0; i
< max_entries
; i
++, entries
++) {
4046 if (strcmp(entries
->name
, name
) == 0)
4051 error(1, 0, "%s", error_msg
);
4057 static int firmware_info(const char *input
)
4059 struct safeloader_image_info info
= {};
4060 struct image_partition_entry part
= {};
4061 struct flash_partition_entry
*e
;
4064 input_file
= fopen(input
, "rb");
4066 safeloader_parse_image(input_file
, &info
);
4068 if (info
.type
== SAFELOADER_TYPE_VENDOR
) {
4069 char buf
[SAFELOADER_HEADER_SIZE
] = {};
4070 uint32_t vendor_size
;
4072 fseek(input_file
, SAFELOADER_PREAMBLE_SIZE
, SEEK_SET
);
4073 fread(&vendor_size
, sizeof(uint32_t), 1, input_file
);
4075 vendor_size
= ntohl(vendor_size
);
4076 fread(buf
, vendor_size
, 1, input_file
);
4078 printf("Firmware vendor string:\n");
4079 fwrite(buf
, strnlen(buf
, vendor_size
), 1, stdout
);
4083 printf("Firmware image partitions:\n");
4084 printf("%-8s %-8s %s\n", "base", "size", "name");
4086 e
= &info
.entries
[0];
4087 for (unsigned int i
= 0; i
< MAX_PARTITIONS
&& e
->name
; i
++, e
++)
4088 printf("%08x %08x %s\n", e
->base
, e
->size
, e
->name
);
4090 e
= find_partition(&info
.entries
[0], MAX_PARTITIONS
, "soft-version", NULL
);
4092 struct soft_version
*s
;
4093 unsigned int ascii_len
;
4098 safeloader_read_partition(input_file
, info
.payload_offset
+ e
->base
, e
, &part
);
4099 data_len
= ntohl(((struct meta_header
*) part
.data
)->length
);
4100 buf
= part
.data
+ sizeof(struct meta_header
);
4102 /* Check for (null-terminated) string */
4104 while (ascii_len
< data_len
&& isascii(buf
[ascii_len
]))
4107 isstr
= ascii_len
== data_len
;
4109 printf("\n[Software version]\n");
4111 fwrite(buf
, strnlen((const char *) buf
, data_len
), 1, stdout
);
4113 } else if (data_len
>= offsetof(struct soft_version
, rev
)) {
4114 s
= (struct soft_version
*) buf
;
4116 printf("Version: %d.%d.%d\n", s
->version_major
, s
->version_minor
, s
->version_patch
);
4117 printf("Date: %02x%02x-%02x-%02x\n", s
->year_hi
, s
->year_lo
, s
->month
, s
->day
);
4118 printf("Revision: %d\n", ntohl(s
->rev
));
4120 printf("Failed to parse data\n");
4123 free_image_partition(&part
);
4126 e
= find_partition(&info
.entries
[0], MAX_PARTITIONS
, "support-list", NULL
);
4130 safeloader_read_partition(input_file
, info
.payload_offset
+ e
->base
, e
, &part
);
4131 data_len
= ntohl(((struct meta_header
*) part
.data
)->length
);
4133 printf("\n[Support list]\n");
4134 fwrite(part
.data
+ sizeof(struct meta_header
), data_len
, 1, stdout
);
4137 free_image_partition(&part
);
4140 e
= find_partition(&info
.entries
[0], MAX_PARTITIONS
, "partition-table", NULL
);
4142 size_t flash_table_offset
= info
.payload_offset
+ e
->base
+ 4;
4143 struct flash_partition_entry parts
[MAX_PARTITIONS
] = {};
4145 if (read_partition_table(input_file
, flash_table_offset
, parts
, MAX_PARTITIONS
, PARTITION_TABLE_FLASH
))
4146 error(1, 0, "Error can not read the partition table (partition)");
4148 printf("\n[Partition table]\n");
4149 printf("%-8s %-8s %s\n", "base", "size", "name");
4152 for (unsigned int i
= 0; i
< MAX_PARTITIONS
&& e
->name
; i
++, e
++)
4153 printf("%08x %08x %s\n", e
->base
, e
->size
, e
->name
);
4161 static void write_ff(FILE *output_file
, size_t size
)
4166 memset(buf
, 0xff, sizeof(buf
));
4168 for (offset
= 0; offset
+ sizeof(buf
) < size
; offset
+= sizeof(buf
)) {
4169 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
4170 error(1, errno
, "Can not write 0xff to output_file");
4173 /* write last chunk smaller than buffer */
4174 if (offset
< size
) {
4175 offset
= size
- offset
;
4176 if (fwrite(buf
, offset
, 1, output_file
) != 1)
4177 error(1, errno
, "Can not write partition to output_file");
4181 static void convert_firmware(const char *input
, const char *output
)
4183 struct flash_partition_entry flash
[MAX_PARTITIONS
] = {};
4184 struct flash_partition_entry
*fwup_partition_table
;
4185 struct flash_partition_entry
*flash_file_system
;
4186 struct flash_partition_entry
*fwup_file_system
;
4187 struct flash_partition_entry
*flash_os_image
;
4188 struct flash_partition_entry
*fwup_os_image
;
4189 struct safeloader_image_info info
= {};
4190 size_t flash_table_offset
;
4191 struct stat statbuf
;
4195 /* check input file */
4196 if (stat(input
, &statbuf
)) {
4197 error(1, errno
, "Can not read input firmware %s", input
);
4200 input_file
= fopen(input
, "rb");
4202 error(1, 0, "Can not open input firmware %s", input
);
4204 output_file
= fopen(output
, "wb");
4206 error(1, 0, "Can not open output firmware %s", output
);
4208 input_file
= fopen(input
, "rb");
4209 safeloader_parse_image(input_file
, &info
);
4211 fwup_os_image
= find_partition(info
.entries
, MAX_PARTITIONS
,
4212 "os-image", "Error can not find os-image partition (fwup)");
4213 fwup_file_system
= find_partition(info
.entries
, MAX_PARTITIONS
,
4214 "file-system", "Error can not find file-system partition (fwup)");
4215 fwup_partition_table
= find_partition(info
.entries
, MAX_PARTITIONS
,
4216 "partition-table", "Error can not find partition-table partition");
4218 /* the flash partition table has a 0x00000004 magic haeder */
4219 flash_table_offset
= info
.payload_offset
+ fwup_partition_table
->base
+ 4;
4220 if (read_partition_table(input_file
, flash_table_offset
, flash
, MAX_PARTITIONS
, PARTITION_TABLE_FLASH
) != 0)
4221 error(1, 0, "Error can not read the partition table (flash)");
4223 flash_os_image
= find_partition(flash
, MAX_PARTITIONS
,
4224 "os-image", "Error can not find os-image partition (flash)");
4225 flash_file_system
= find_partition(flash
, MAX_PARTITIONS
,
4226 "file-system", "Error can not find file-system partition (flash)");
4228 /* write os_image to 0x0 */
4229 write_partition(input_file
, info
.payload_offset
, fwup_os_image
, output_file
);
4230 write_ff(output_file
, flash_os_image
->size
- fwup_os_image
->size
);
4232 /* write file-system behind os_image */
4233 fseek(output_file
, flash_file_system
->base
- flash_os_image
->base
, SEEK_SET
);
4234 write_partition(input_file
, info
.payload_offset
, fwup_file_system
, output_file
);
4236 fclose(output_file
);
4240 int main(int argc
, char *argv
[]) {
4241 const char *info_image
= NULL
, *board
= NULL
, *kernel_image
= NULL
, *rootfs_image
= NULL
, *output
= NULL
;
4242 const char *extract_image
= NULL
, *output_directory
= NULL
, *convert_image
= NULL
;
4243 bool add_jffs2_eof
= false, sysupgrade
= false;
4245 struct device_info
*info
;
4246 set_source_date_epoch();
4251 c
= getopt(argc
, argv
, "i:B:k:r:o:V:jSh:x:d:z:");
4257 info_image
= optarg
;
4265 kernel_image
= optarg
;
4269 rootfs_image
= optarg
;
4277 sscanf(optarg
, "r%u", &rev
);
4281 add_jffs2_eof
= true;
4293 output_directory
= optarg
;
4297 extract_image
= optarg
;
4301 convert_image
= optarg
;
4311 firmware_info(info_image
);
4312 } else if (extract_image
|| output_directory
) {
4314 error(1, 0, "No factory/oem image given via -x <file>. Output directory is only valid with -x");
4315 if (!output_directory
)
4316 error(1, 0, "Can not extract an image without output directory. Use -d <dir>");
4317 extract_firmware(extract_image
, output_directory
);
4318 } else if (convert_image
) {
4320 error(1, 0, "Can not convert a factory/oem image into sysupgrade image without output file. Use -o <file>");
4321 convert_firmware(convert_image
, output
);
4324 error(1, 0, "no board has been specified");
4326 error(1, 0, "no kernel image has been specified");
4328 error(1, 0, "no rootfs image has been specified");
4330 error(1, 0, "no output filename has been specified");
4332 info
= find_board(board
);
4335 error(1, 0, "unsupported board %s", board
);
4337 build_image(output
, kernel_image
, rootfs_image
, rev
, add_jffs2_eof
, sysupgrade
, info
);