1 // SPDX-License-Identifier: BSD-2-Clause
3 Copyright (c) 2014, Matthias Schiffer <mschiffer@universe-factory.net>
11 Image generation tool for the TP-LINK SafeLoader as seen on
12 TP-LINK Pharos devices (CPE210/220/510/520)
28 #include <arpa/inet.h>
30 #include <sys/types.h>
37 #define ALIGN(x,a) ({ typeof(a) __a = (a); (((x) + __a - 1) & ~(__a - 1)); })
40 #define MAX_PARTITIONS 32
42 /** An image partition table entry */
43 struct image_partition_entry
{
49 /** A flash partition table entry */
50 struct flash_partition_entry
{
56 /** Flash partition names table entry */
57 struct factory_partition_names
{
58 const char *partition_table
;
61 const char *support_list
;
62 const char *file_system
;
63 const char *extra_para
;
66 /** Partition trailing padding definitions
67 * Values 0x00 to 0xff are reserved to indicate the padding value
68 * Values from 0x100 are reserved to indicate other behaviour */
69 enum partition_trail_value
{
72 PART_TRAIL_MAX
= 0xff,
73 PART_TRAIL_NONE
= 0x100
76 /** soft-version value overwrite types
77 * The default (for an uninitialised soft_ver field) is to use the numerical
78 * version number "0.0.0"
81 SOFT_VER_TYPE_NUMERIC
= 0,
82 SOFT_VER_TYPE_TEXT
= 1,
85 /** Firmware layout description */
89 const char *support_list
;
90 enum partition_trail_value part_trail
;
92 enum soft_ver_type type
;
98 uint32_t soft_ver_compat_level
;
99 struct flash_partition_entry partitions
[MAX_PARTITIONS
+1];
100 const char *first_sysupgrade_partition
;
101 const char *last_sysupgrade_partition
;
102 struct factory_partition_names partition_names
;
105 #define SOFT_VER_TEXT(_t) {.type = SOFT_VER_TYPE_TEXT, .text = _t}
106 #define SOFT_VER_NUMERIC(_maj, _min, _patch) { \
107 .type = SOFT_VER_TYPE_NUMERIC, \
108 .num = {_maj, _min, _patch}}
109 #define SOFT_VER_DEFAULT SOFT_VER_NUMERIC(0, 0, 0)
111 struct __attribute__((__packed__
)) meta_header
{
116 /** The content of the soft-version structure */
117 struct __attribute__((__packed__
)) soft_version
{
119 uint8_t version_major
;
120 uint8_t version_minor
;
121 uint8_t version_patch
;
127 uint32_t compat_level
;
131 * Safeloader image type
132 * Safeloader images contain a 0x14 byte preamble with image size (big endian
133 * UINT32) and md5 checksum (16 bytes).
135 * SAFEFLOADER_TYPE_DEFAULT
136 * Standard preamble with size including preamble length, and checksum.
137 * Header of 0x1000 bytes, contents of which are not specified.
138 * Payload starts at offset 0x1014.
140 * SAFELOADER_TYPE_VENDOR
141 * Standard preamble with size including preamble length, and checksum.
142 * Header contains up to 0x1000 bytes of vendor data, starting with a big endian
143 * UINT32 size, followed by that number of bytes containing (text) data.
144 * Padded with 0xFF. Payload starts at offset 0x1014.
146 * SAFELOADER_TYPE_CLOUD
147 * Standard preamble with size including preamble length, and checksum.
148 * Followed by the 'fw-type:Cloud' string and some (unknown) data.
149 * Payload starts at offset 0x1014.
151 * SAFELOADER_TYPE_QNEW
152 * Reversed order preamble, with (apparent) md5 checksum before the image
153 * size. The size does not include the preamble length.
154 * Header starts with 0x3C bytes, starting with the string '?NEW' (format not
155 * understood). Then another 0x1000 bytes follow, with the data payload
156 * starting at 0x1050.
158 enum safeloader_image_type
{
159 SAFELOADER_TYPE_DEFAULT
,
160 SAFELOADER_TYPE_VENDOR
,
161 SAFELOADER_TYPE_CLOUD
,
162 SAFELOADER_TYPE_QNEW
,
165 /* Internal representation of safeloader image data */
166 struct safeloader_image_info
{
167 enum safeloader_image_type type
;
168 size_t payload_offset
;
169 struct flash_partition_entry entries
[MAX_PARTITIONS
];
172 #define SAFELOADER_PREAMBLE_SIZE 0x14
173 #define SAFELOADER_HEADER_SIZE 0x1000
174 #define SAFELOADER_PAYLOAD_OFFSET (SAFELOADER_PREAMBLE_SIZE + SAFELOADER_HEADER_SIZE)
176 #define SAFELOADER_QNEW_HEADER_SIZE 0x3C
177 #define SAFELOADER_QNEW_PAYLOAD_OFFSET \
178 (SAFELOADER_PREAMBLE_SIZE + SAFELOADER_QNEW_HEADER_SIZE + SAFELOADER_HEADER_SIZE)
180 #define SAFELOADER_PAYLOAD_TABLE_SIZE 0x800
182 static const uint8_t jffs2_eof_mark
[4] = {0xde, 0xad, 0xc0, 0xde};
186 Salt for the MD5 hash
188 Fortunately, TP-LINK seems to use the same salt for most devices which use
189 the new image format.
191 static const uint8_t md5_salt
[16] = {
192 0x7a, 0x2b, 0x15, 0xed,
193 0x9b, 0x98, 0x59, 0x6d,
194 0xe5, 0x04, 0xab, 0x44,
195 0xac, 0x2a, 0x9f, 0x4e,
199 /** Firmware layout table */
200 static struct device_info boards
[] = {
201 /** Firmware layout for the CPE210/220 V1 */
204 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
207 "CPE210(TP-LINK|UN|N300-2):1.0\r\n"
208 "CPE210(TP-LINK|UN|N300-2):1.1\r\n"
209 "CPE210(TP-LINK|US|N300-2):1.1\r\n"
210 "CPE210(TP-LINK|EU|N300-2):1.1\r\n"
211 "CPE220(TP-LINK|UN|N300-2):1.1\r\n"
212 "CPE220(TP-LINK|US|N300-2):1.1\r\n"
213 "CPE220(TP-LINK|EU|N300-2):1.1\r\n",
215 .soft_ver
= SOFT_VER_DEFAULT
,
218 {"fs-uboot", 0x00000, 0x20000},
219 {"partition-table", 0x20000, 0x02000},
220 {"default-mac", 0x30000, 0x00020},
221 {"product-info", 0x31100, 0x00100},
222 {"signature", 0x32000, 0x00400},
223 {"firmware", 0x40000, 0x770000},
224 {"soft-version", 0x7b0000, 0x00100},
225 {"support-list", 0x7b1000, 0x00400},
226 {"user-config", 0x7c0000, 0x10000},
227 {"default-config", 0x7d0000, 0x10000},
228 {"log", 0x7e0000, 0x10000},
229 {"radio", 0x7f0000, 0x10000},
233 .first_sysupgrade_partition
= "os-image",
234 .last_sysupgrade_partition
= "support-list",
237 /** Firmware layout for the CPE210 V2 */
240 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n",
243 "CPE210(TP-LINK|EU|N300-2|00000000):2.0\r\n"
244 "CPE210(TP-LINK|EU|N300-2|45550000):2.0\r\n"
245 "CPE210(TP-LINK|EU|N300-2|55530000):2.0\r\n"
246 "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
247 "CPE210(TP-LINK|UN|N300-2|45550000):2.0\r\n"
248 "CPE210(TP-LINK|UN|N300-2|55530000):2.0\r\n"
249 "CPE210(TP-LINK|US|N300-2|55530000):2.0\r\n"
250 "CPE210(TP-LINK|UN|N300-2):2.0\r\n"
251 "CPE210(TP-LINK|EU|N300-2):2.0\r\n"
252 "CPE210(TP-LINK|US|N300-2):2.0\r\n",
254 .soft_ver
= SOFT_VER_DEFAULT
,
257 {"fs-uboot", 0x00000, 0x20000},
258 {"partition-table", 0x20000, 0x02000},
259 {"default-mac", 0x30000, 0x00020},
260 {"product-info", 0x31100, 0x00100},
261 {"device-info", 0x31400, 0x00400},
262 {"signature", 0x32000, 0x00400},
263 {"device-id", 0x33000, 0x00100},
264 {"firmware", 0x40000, 0x770000},
265 {"soft-version", 0x7b0000, 0x00100},
266 {"support-list", 0x7b1000, 0x01000},
267 {"user-config", 0x7c0000, 0x10000},
268 {"default-config", 0x7d0000, 0x10000},
269 {"log", 0x7e0000, 0x10000},
270 {"radio", 0x7f0000, 0x10000},
274 .first_sysupgrade_partition
= "os-image",
275 .last_sysupgrade_partition
= "support-list",
278 /** Firmware layout for the CPE210 V3 */
281 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n",
284 "CPE210(TP-LINK|EU|N300-2|45550000):3.0\r\n"
285 "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n"
286 "CPE210(TP-LINK|US|N300-2|55530000):3.0\r\n"
287 "CPE210(TP-LINK|UN|N300-2):3.0\r\n"
288 "CPE210(TP-LINK|EU|N300-2):3.0\r\n"
289 "CPE210(TP-LINK|EU|N300-2|45550000):3.1\r\n"
290 "CPE210(TP-LINK|UN|N300-2|00000000):3.1\r\n"
291 "CPE210(TP-LINK|US|N300-2|55530000):3.1\r\n"
292 "CPE210(TP-LINK|EU|N300-2|45550000):3.20\r\n"
293 "CPE210(TP-LINK|UN|N300-2|00000000):3.20\r\n"
294 "CPE210(TP-LINK|US|N300-2|55530000):3.20\r\n",
296 .soft_ver
= SOFT_VER_DEFAULT
,
299 {"fs-uboot", 0x00000, 0x20000},
300 {"partition-table", 0x20000, 0x01000},
301 {"default-mac", 0x30000, 0x00020},
302 {"product-info", 0x31100, 0x00100},
303 {"device-info", 0x31400, 0x00400},
304 {"signature", 0x32000, 0x00400},
305 {"device-id", 0x33000, 0x00100},
306 {"firmware", 0x40000, 0x770000},
307 {"soft-version", 0x7b0000, 0x00100},
308 {"support-list", 0x7b1000, 0x01000},
309 {"user-config", 0x7c0000, 0x10000},
310 {"default-config", 0x7d0000, 0x10000},
311 {"log", 0x7e0000, 0x10000},
312 {"radio", 0x7f0000, 0x10000},
316 .first_sysupgrade_partition
= "os-image",
317 .last_sysupgrade_partition
= "support-list",
320 /** Firmware layout for the CPE220 V2 */
323 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
326 "CPE220(TP-LINK|EU|N300-2|00000000):2.0\r\n"
327 "CPE220(TP-LINK|EU|N300-2|45550000):2.0\r\n"
328 "CPE220(TP-LINK|EU|N300-2|55530000):2.0\r\n"
329 "CPE220(TP-LINK|UN|N300-2|00000000):2.0\r\n"
330 "CPE220(TP-LINK|UN|N300-2|45550000):2.0\r\n"
331 "CPE220(TP-LINK|UN|N300-2|55530000):2.0\r\n"
332 "CPE220(TP-LINK|US|N300-2|55530000):2.0\r\n"
333 "CPE220(TP-LINK|UN|N300-2):2.0\r\n"
334 "CPE220(TP-LINK|EU|N300-2):2.0\r\n"
335 "CPE220(TP-LINK|US|N300-2):2.0\r\n",
337 .soft_ver
= SOFT_VER_DEFAULT
,
340 {"fs-uboot", 0x00000, 0x20000},
341 {"partition-table", 0x20000, 0x02000},
342 {"default-mac", 0x30000, 0x00020},
343 {"product-info", 0x31100, 0x00100},
344 {"signature", 0x32000, 0x00400},
345 {"firmware", 0x40000, 0x770000},
346 {"soft-version", 0x7b0000, 0x00100},
347 {"support-list", 0x7b1000, 0x00400},
348 {"user-config", 0x7c0000, 0x10000},
349 {"default-config", 0x7d0000, 0x10000},
350 {"log", 0x7e0000, 0x10000},
351 {"radio", 0x7f0000, 0x10000},
355 .first_sysupgrade_partition
= "os-image",
356 .last_sysupgrade_partition
= "support-list",
359 /** Firmware layout for the CPE220 V3 */
362 .vendor
= "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n",
365 "CPE220(TP-LINK|EU|N300-2|00000000):3.0\r\n"
366 "CPE220(TP-LINK|EU|N300-2|45550000):3.0\r\n"
367 "CPE220(TP-LINK|EU|N300-2|55530000):3.0\r\n"
368 "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n"
369 "CPE220(TP-LINK|UN|N300-2|45550000):3.0\r\n"
370 "CPE220(TP-LINK|UN|N300-2|55530000):3.0\r\n"
371 "CPE220(TP-LINK|US|N300-2|55530000):3.0\r\n"
372 "CPE220(TP-LINK|UN|N300-2):3.0\r\n"
373 "CPE220(TP-LINK|EU|N300-2):3.0\r\n"
374 "CPE220(TP-LINK|US|N300-2):3.0\r\n",
376 .soft_ver
= SOFT_VER_DEFAULT
,
379 {"fs-uboot", 0x00000, 0x20000},
380 {"partition-table", 0x20000, 0x02000},
381 {"default-mac", 0x30000, 0x00020},
382 {"product-info", 0x31100, 0x00100},
383 {"device-info", 0x31400, 0x00400},
384 {"signature", 0x32000, 0x00400},
385 {"device-id", 0x33000, 0x00100},
386 {"firmware", 0x40000, 0x770000},
387 {"soft-version", 0x7b0000, 0x00100},
388 {"support-list", 0x7b1000, 0x01000},
389 {"user-config", 0x7c0000, 0x10000},
390 {"default-config", 0x7d0000, 0x10000},
391 {"log", 0x7e0000, 0x10000},
392 {"radio", 0x7f0000, 0x10000},
396 .first_sysupgrade_partition
= "os-image",
397 .last_sysupgrade_partition
= "support-list",
400 /** Firmware layout for the CPE510/520 V1 */
403 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
406 "CPE510(TP-LINK|UN|N300-5):1.0\r\n"
407 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
408 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
409 "CPE510(TP-LINK|US|N300-5):1.1\r\n"
410 "CPE510(TP-LINK|CA|N300-5):1.1\r\n"
411 "CPE510(TP-LINK|EU|N300-5):1.1\r\n"
412 "CPE520(TP-LINK|UN|N300-5):1.1\r\n"
413 "CPE520(TP-LINK|US|N300-5):1.1\r\n"
414 "CPE520(TP-LINK|EU|N300-5):1.1\r\n",
416 .soft_ver
= SOFT_VER_DEFAULT
,
419 {"fs-uboot", 0x00000, 0x20000},
420 {"partition-table", 0x20000, 0x02000},
421 {"default-mac", 0x30000, 0x00020},
422 {"product-info", 0x31100, 0x00100},
423 {"signature", 0x32000, 0x00400},
424 {"firmware", 0x40000, 0x770000},
425 {"soft-version", 0x7b0000, 0x00100},
426 {"support-list", 0x7b1000, 0x00400},
427 {"user-config", 0x7c0000, 0x10000},
428 {"default-config", 0x7d0000, 0x10000},
429 {"log", 0x7e0000, 0x10000},
430 {"radio", 0x7f0000, 0x10000},
434 .first_sysupgrade_partition
= "os-image",
435 .last_sysupgrade_partition
= "support-list",
438 /** Firmware layout for the CPE510 V2 */
441 .vendor
= "CPE510(TP-LINK|UN|N300-5):2.0\r\n",
444 "CPE510(TP-LINK|EU|N300-5|00000000):2.0\r\n"
445 "CPE510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
446 "CPE510(TP-LINK|EU|N300-5|55530000):2.0\r\n"
447 "CPE510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
448 "CPE510(TP-LINK|UN|N300-5|45550000):2.0\r\n"
449 "CPE510(TP-LINK|UN|N300-5|55530000):2.0\r\n"
450 "CPE510(TP-LINK|US|N300-5|00000000):2.0\r\n"
451 "CPE510(TP-LINK|US|N300-5|45550000):2.0\r\n"
452 "CPE510(TP-LINK|US|N300-5|55530000):2.0\r\n"
453 "CPE510(TP-LINK|UN|N300-5):2.0\r\n"
454 "CPE510(TP-LINK|EU|N300-5):2.0\r\n"
455 "CPE510(TP-LINK|US|N300-5):2.0\r\n",
457 .soft_ver
= SOFT_VER_DEFAULT
,
460 {"fs-uboot", 0x00000, 0x20000},
461 {"partition-table", 0x20000, 0x02000},
462 {"default-mac", 0x30000, 0x00020},
463 {"product-info", 0x31100, 0x00100},
464 {"signature", 0x32000, 0x00400},
465 {"firmware", 0x40000, 0x770000},
466 {"soft-version", 0x7b0000, 0x00100},
467 {"support-list", 0x7b1000, 0x00400},
468 {"user-config", 0x7c0000, 0x10000},
469 {"default-config", 0x7d0000, 0x10000},
470 {"log", 0x7e0000, 0x10000},
471 {"radio", 0x7f0000, 0x10000},
475 .first_sysupgrade_partition
= "os-image",
476 .last_sysupgrade_partition
= "support-list",
479 /** Firmware layout for the CPE510 V3 */
482 .vendor
= "CPE510(TP-LINK|UN|N300-5):3.0\r\n",
485 "CPE510(TP-LINK|EU|N300-5|00000000):3.0\r\n"
486 "CPE510(TP-LINK|EU|N300-5|45550000):3.0\r\n"
487 "CPE510(TP-LINK|EU|N300-5|55530000):3.0\r\n"
488 "CPE510(TP-LINK|UN|N300-5|00000000):3.0\r\n"
489 "CPE510(TP-LINK|UN|N300-5|45550000):3.0\r\n"
490 "CPE510(TP-LINK|UN|N300-5|55530000):3.0\r\n"
491 "CPE510(TP-LINK|US|N300-5|00000000):3.0\r\n"
492 "CPE510(TP-LINK|US|N300-5|45550000):3.0\r\n"
493 "CPE510(TP-LINK|US|N300-5|55530000):3.0\r\n"
494 "CPE510(TP-LINK|UN|N300-5):3.0\r\n"
495 "CPE510(TP-LINK|EU|N300-5):3.0\r\n"
496 "CPE510(TP-LINK|US|N300-5):3.0\r\n"
497 "CPE510(TP-LINK|UN|N300-5|00000000):3.20\r\n"
498 "CPE510(TP-LINK|US|N300-5|55530000):3.20\r\n"
499 "CPE510(TP-LINK|EU|N300-5|45550000):3.20\r\n",
501 .soft_ver
= SOFT_VER_DEFAULT
,
504 {"fs-uboot", 0x00000, 0x20000},
505 {"partition-table", 0x20000, 0x02000},
506 {"default-mac", 0x30000, 0x00020},
507 {"product-info", 0x31100, 0x00100},
508 {"signature", 0x32000, 0x00400},
509 {"firmware", 0x40000, 0x770000},
510 {"soft-version", 0x7b0000, 0x00100},
511 {"support-list", 0x7b1000, 0x00400},
512 {"user-config", 0x7c0000, 0x10000},
513 {"default-config", 0x7d0000, 0x10000},
514 {"log", 0x7e0000, 0x10000},
515 {"radio", 0x7f0000, 0x10000},
519 .first_sysupgrade_partition
= "os-image",
520 .last_sysupgrade_partition
= "support-list",
523 /** Firmware layout for the CPE605V1 */
526 .vendor
= "CPE605(TP-LINK|UN|N150-5):1.0\r\n",
529 "CPE605(TP-LINK|UN|N150-5|00000000):1.0\r\n"
530 "CPE605(TP-LINK|EU|N150-5|45550000):1.0\r\n"
531 "CPE605(TP-LINK|US|N150-5|55530000):1.0\r\n",
533 .soft_ver
= SOFT_VER_DEFAULT
,
536 {"fs-uboot", 0x00000, 0x20000},
537 {"partition-table", 0x20000, 0x02000},
538 {"default-mac", 0x30000, 0x00020},
539 {"serial-number", 0x30100, 0x00020},
540 {"product-info", 0x31100, 0x00100},
541 {"device-info", 0x31400, 0x00400},
542 {"signature", 0x32000, 0x00400},
543 {"device-id", 0x33000, 0x00100},
544 {"firmware", 0x40000, 0x770000},
545 {"soft-version", 0x7b0000, 0x00100},
546 {"support-list", 0x7b1000, 0x01000},
547 {"user-config", 0x7c0000, 0x10000},
548 {"default-config", 0x7d0000, 0x10000},
549 {"log", 0x7e0000, 0x10000},
550 {"radio", 0x7f0000, 0x10000},
554 .first_sysupgrade_partition
= "os-image",
555 .last_sysupgrade_partition
= "support-list",
558 /** Firmware layout for the CPE610V1 */
561 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n",
564 "CPE610(TP-LINK|EU|N300-5|00000000):1.0\r\n"
565 "CPE610(TP-LINK|EU|N300-5|45550000):1.0\r\n"
566 "CPE610(TP-LINK|EU|N300-5|55530000):1.0\r\n"
567 "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n"
568 "CPE610(TP-LINK|UN|N300-5|45550000):1.0\r\n"
569 "CPE610(TP-LINK|UN|N300-5|55530000):1.0\r\n"
570 "CPE610(TP-LINK|US|N300-5|55530000):1.0\r\n"
571 "CPE610(TP-LINK|UN|N300-5):1.0\r\n"
572 "CPE610(TP-LINK|EU|N300-5):1.0\r\n"
573 "CPE610(TP-LINK|US|N300-5):1.0\r\n",
575 .soft_ver
= SOFT_VER_DEFAULT
,
578 {"fs-uboot", 0x00000, 0x20000},
579 {"partition-table", 0x20000, 0x02000},
580 {"default-mac", 0x30000, 0x00020},
581 {"product-info", 0x31100, 0x00100},
582 {"signature", 0x32000, 0x00400},
583 {"firmware", 0x40000, 0x770000},
584 {"soft-version", 0x7b0000, 0x00100},
585 {"support-list", 0x7b1000, 0x00400},
586 {"user-config", 0x7c0000, 0x10000},
587 {"default-config", 0x7d0000, 0x10000},
588 {"log", 0x7e0000, 0x10000},
589 {"radio", 0x7f0000, 0x10000},
593 .first_sysupgrade_partition
= "os-image",
594 .last_sysupgrade_partition
= "support-list",
597 /** Firmware layout for the CPE610V2 */
600 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n",
603 "CPE610(TP-LINK|EU|N300-5|00000000):2.0\r\n"
604 "CPE610(TP-LINK|EU|N300-5|45550000):2.0\r\n"
605 "CPE610(TP-LINK|EU|N300-5|55530000):2.0\r\n"
606 "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n"
607 "CPE610(TP-LINK|UN|N300-5|45550000):2.0\r\n"
608 "CPE610(TP-LINK|UN|N300-5|55530000):2.0\r\n"
609 "CPE610(TP-LINK|US|N300-5|55530000):2.0\r\n"
610 "CPE610(TP-LINK|UN|N300-5):2.0\r\n"
611 "CPE610(TP-LINK|EU|N300-5):2.0\r\n"
612 "CPE610(TP-LINK|US|N300-5):2.0\r\n",
614 .soft_ver
= SOFT_VER_DEFAULT
,
617 {"fs-uboot", 0x00000, 0x20000},
618 {"partition-table", 0x20000, 0x02000},
619 {"default-mac", 0x30000, 0x00020},
620 {"product-info", 0x31100, 0x00100},
621 {"signature", 0x32000, 0x00400},
622 {"firmware", 0x40000, 0x770000},
623 {"soft-version", 0x7b0000, 0x00100},
624 {"support-list", 0x7b1000, 0x00400},
625 {"user-config", 0x7c0000, 0x10000},
626 {"default-config", 0x7d0000, 0x10000},
627 {"log", 0x7e0000, 0x10000},
628 {"radio", 0x7f0000, 0x10000},
632 .first_sysupgrade_partition
= "os-image",
633 .last_sysupgrade_partition
= "support-list",
635 /** Firmware layout for the CPE710 V1 */
638 .vendor
= "CPE710(TP-LINK|UN|AC866-5|00000000):1.0\r\n",
641 "CPE710(TP-LINK|UN|AC866-5|00000000):1.0\r\n"
642 "CPE710(TP-LINK|EU|AC866-5|45550000):1.0\r\n"
643 "CPE710(TP-LINK|US|AC866-5|55530000):1.0\r\n"
644 "CPE710(TP-LINK|UN|AC866-5):1.0\r\n"
645 "CPE710(TP-LINK|EU|AC866-5):1.0\r\n"
646 "CPE710(TP-LINK|US|AC866-5):1.0\r\n",
648 .soft_ver
= SOFT_VER_DEFAULT
,
651 {"fs-uboot", 0x00000, 0x50000},
652 {"partition-table", 0x50000, 0x02000},
653 {"default-mac", 0x60000, 0x00020},
654 {"serial-number", 0x60100, 0x00020},
655 {"product-info", 0x61100, 0x00100},
656 {"device-info", 0x61400, 0x00400},
657 {"signature", 0x62000, 0x00400},
658 {"device-id", 0x63000, 0x00100},
659 {"firmware", 0x70000, 0xf40000},
660 {"soft-version", 0xfb0000, 0x00100},
661 {"support-list", 0xfb1000, 0x01000},
662 {"user-config", 0xfc0000, 0x10000},
663 {"default-config", 0xfd0000, 0x10000},
664 {"log", 0xfe0000, 0x10000},
665 {"radio", 0xff0000, 0x10000},
669 .first_sysupgrade_partition
= "os-image",
670 .last_sysupgrade_partition
= "support-list",
675 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
678 "WBS210(TP-LINK|UN|N300-2):1.20\r\n"
679 "WBS210(TP-LINK|US|N300-2):1.20\r\n"
680 "WBS210(TP-LINK|EU|N300-2):1.20\r\n",
682 .soft_ver
= SOFT_VER_DEFAULT
,
685 {"fs-uboot", 0x00000, 0x20000},
686 {"partition-table", 0x20000, 0x02000},
687 {"default-mac", 0x30000, 0x00020},
688 {"product-info", 0x31100, 0x00100},
689 {"signature", 0x32000, 0x00400},
690 {"firmware", 0x40000, 0x770000},
691 {"soft-version", 0x7b0000, 0x00100},
692 {"support-list", 0x7b1000, 0x00400},
693 {"user-config", 0x7c0000, 0x10000},
694 {"default-config", 0x7d0000, 0x10000},
695 {"log", 0x7e0000, 0x10000},
696 {"radio", 0x7f0000, 0x10000},
700 .first_sysupgrade_partition
= "os-image",
701 .last_sysupgrade_partition
= "support-list",
706 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
709 "WBS210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
710 "WBS210(TP-LINK|US|N300-2|55530000):2.0\r\n"
711 "WBS210(TP-LINK|EU|N300-2|45550000):2.0\r\n",
713 .soft_ver
= SOFT_VER_DEFAULT
,
716 {"fs-uboot", 0x00000, 0x20000},
717 {"partition-table", 0x20000, 0x02000},
718 {"default-mac", 0x30000, 0x00020},
719 {"product-info", 0x31100, 0x00100},
720 {"signature", 0x32000, 0x00400},
721 {"firmware", 0x40000, 0x770000},
722 {"soft-version", 0x7b0000, 0x00100},
723 {"support-list", 0x7b1000, 0x00400},
724 {"user-config", 0x7c0000, 0x10000},
725 {"default-config", 0x7d0000, 0x10000},
726 {"log", 0x7e0000, 0x10000},
727 {"radio", 0x7f0000, 0x10000},
731 .first_sysupgrade_partition
= "os-image",
732 .last_sysupgrade_partition
= "support-list",
737 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
740 "WBS510(TP-LINK|UN|N300-5):1.20\r\n"
741 "WBS510(TP-LINK|US|N300-5):1.20\r\n"
742 "WBS510(TP-LINK|EU|N300-5):1.20\r\n"
743 "WBS510(TP-LINK|CA|N300-5):1.20\r\n",
745 .soft_ver
= SOFT_VER_DEFAULT
,
748 {"fs-uboot", 0x00000, 0x20000},
749 {"partition-table", 0x20000, 0x02000},
750 {"default-mac", 0x30000, 0x00020},
751 {"product-info", 0x31100, 0x00100},
752 {"signature", 0x32000, 0x00400},
753 {"firmware", 0x40000, 0x770000},
754 {"soft-version", 0x7b0000, 0x00100},
755 {"support-list", 0x7b1000, 0x00400},
756 {"user-config", 0x7c0000, 0x10000},
757 {"default-config", 0x7d0000, 0x10000},
758 {"log", 0x7e0000, 0x10000},
759 {"radio", 0x7f0000, 0x10000},
763 .first_sysupgrade_partition
= "os-image",
764 .last_sysupgrade_partition
= "support-list",
769 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
772 "WBS510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
773 "WBS510(TP-LINK|US|N300-5|55530000):2.0\r\n"
774 "WBS510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
775 "WBS510(TP-LINK|CA|N300-5|43410000):2.0\r\n",
777 .soft_ver
= SOFT_VER_DEFAULT
,
780 {"fs-uboot", 0x00000, 0x20000},
781 {"partition-table", 0x20000, 0x02000},
782 {"default-mac", 0x30000, 0x00020},
783 {"product-info", 0x31100, 0x00100},
784 {"signature", 0x32000, 0x00400},
785 {"firmware", 0x40000, 0x770000},
786 {"soft-version", 0x7b0000, 0x00100},
787 {"support-list", 0x7b1000, 0x00400},
788 {"user-config", 0x7c0000, 0x10000},
789 {"default-config", 0x7d0000, 0x10000},
790 {"log", 0x7e0000, 0x10000},
791 {"radio", 0x7f0000, 0x10000},
795 .first_sysupgrade_partition
= "os-image",
796 .last_sysupgrade_partition
= "support-list",
799 /** Firmware layout for the AD7200 */
805 "{product_name:AD7200,product_ver:1.0.0,special_id:00000000}\r\n",
807 .soft_ver
= SOFT_VER_DEFAULT
,
810 {"SBL1", 0x00000, 0x20000},
811 {"MIBIB", 0x20000, 0x20000},
812 {"SBL2", 0x40000, 0x20000},
813 {"SBL3", 0x60000, 0x30000},
814 {"DDRCONFIG", 0x90000, 0x10000},
815 {"SSD", 0xa0000, 0x10000},
816 {"TZ", 0xb0000, 0x30000},
817 {"RPM", 0xe0000, 0x20000},
818 {"fs-uboot", 0x100000, 0x70000},
819 {"uboot-env", 0x170000, 0x40000},
820 {"radio", 0x1b0000, 0x40000},
821 {"os-image", 0x1f0000, 0x400000},
822 {"file-system", 0x5f0000, 0x1900000},
823 {"default-mac", 0x1ef0000, 0x00200},
824 {"pin", 0x1ef0200, 0x00200},
825 {"device-id", 0x1ef0400, 0x00200},
826 {"product-info", 0x1ef0600, 0x0fa00},
827 {"partition-table", 0x1f00000, 0x10000},
828 {"soft-version", 0x1f10000, 0x10000},
829 {"support-list", 0x1f20000, 0x10000},
830 {"profile", 0x1f30000, 0x10000},
831 {"default-config", 0x1f40000, 0x10000},
832 {"user-config", 0x1f50000, 0x40000},
833 {"qos-db", 0x1f90000, 0x40000},
834 {"usb-config", 0x1fd0000, 0x10000},
835 {"log", 0x1fe0000, 0x20000},
839 .first_sysupgrade_partition
= "os-image",
840 .last_sysupgrade_partition
= "file-system"
843 /** Firmware layout for the C2600 */
849 "{product_name:Archer C2600,product_ver:1.0.0,special_id:00000000}\r\n",
851 .soft_ver
= SOFT_VER_DEFAULT
,
854 We use a bigger os-image partition than the stock images (and thus
855 smaller file-system), as our kernel doesn't fit in the stock firmware's
856 2 MB os-image since kernel 4.14.
859 {"SBL1", 0x00000, 0x20000},
860 {"MIBIB", 0x20000, 0x20000},
861 {"SBL2", 0x40000, 0x20000},
862 {"SBL3", 0x60000, 0x30000},
863 {"DDRCONFIG", 0x90000, 0x10000},
864 {"SSD", 0xa0000, 0x10000},
865 {"TZ", 0xb0000, 0x30000},
866 {"RPM", 0xe0000, 0x20000},
867 {"fs-uboot", 0x100000, 0x70000},
868 {"uboot-env", 0x170000, 0x40000},
869 {"radio", 0x1b0000, 0x40000},
870 {"os-image", 0x1f0000, 0x400000}, /* Stock: base 0x1f0000 size 0x200000 */
871 {"file-system", 0x5f0000, 0x1900000}, /* Stock: base 0x3f0000 size 0x1b00000 */
872 {"default-mac", 0x1ef0000, 0x00200},
873 {"pin", 0x1ef0200, 0x00200},
874 {"product-info", 0x1ef0400, 0x0fc00},
875 {"partition-table", 0x1f00000, 0x10000},
876 {"soft-version", 0x1f10000, 0x10000},
877 {"support-list", 0x1f20000, 0x10000},
878 {"profile", 0x1f30000, 0x10000},
879 {"default-config", 0x1f40000, 0x10000},
880 {"user-config", 0x1f50000, 0x40000},
881 {"qos-db", 0x1f90000, 0x40000},
882 {"usb-config", 0x1fd0000, 0x10000},
883 {"log", 0x1fe0000, 0x20000},
887 .first_sysupgrade_partition
= "os-image",
888 .last_sysupgrade_partition
= "file-system"
891 /** Firmware layout for the A7-V5 */
893 .id
= "ARCHER-A7-V5",
896 "{product_name:Archer A7,product_ver:5.0.0,special_id:45550000}\n"
897 "{product_name:Archer A7,product_ver:5.0.0,special_id:55530000}\n"
898 "{product_name:Archer A7,product_ver:5.0.0,special_id:43410000}\n"
899 "{product_name:Archer A7,product_ver:5.0.0,special_id:4A500000}\n"
900 "{product_name:Archer A7,product_ver:5.0.0,special_id:54570000}\n"
901 "{product_name:Archer A7,product_ver:5.0.0,special_id:52550000}\n",
903 .soft_ver
= SOFT_VER_TEXT("soft_ver:7.0.0\n"),
905 /* We're using a dynamic kernel/rootfs split here */
907 {"factory-boot", 0x00000, 0x20000},
908 {"fs-uboot", 0x20000, 0x20000},
909 {"firmware", 0x40000, 0xec0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
910 /* Stock: name file-system base 0x160000 size 0xda0000 */
911 {"default-mac", 0xf40000, 0x00200},
912 {"pin", 0xf40200, 0x00200},
913 {"device-id", 0xf40400, 0x00100},
914 {"product-info", 0xf40500, 0x0fb00},
915 {"soft-version", 0xf50000, 0x00100},
916 {"extra-para", 0xf51000, 0x01000},
917 {"support-list", 0xf52000, 0x0a000},
918 {"profile", 0xf5c000, 0x04000},
919 {"default-config", 0xf60000, 0x10000},
920 {"user-config", 0xf70000, 0x40000},
921 {"certificate", 0xfb0000, 0x10000},
922 {"partition-table", 0xfc0000, 0x10000},
923 {"log", 0xfd0000, 0x20000},
924 {"radio", 0xff0000, 0x10000},
928 .first_sysupgrade_partition
= "os-image",
929 .last_sysupgrade_partition
= "file-system",
932 /** Firmware layout for the Archer A9 v6 */
934 .id
= "ARCHER-A9-V6",
937 "{product_name:Archer A9,product_ver:6.0,special_id:55530000}\n"
938 "{product_name:Archer A9,product_ver:6.0,special_id:45550000}\n"
939 "{product_name:Archer A9,product_ver:6.0,special_id:52550000}\n"
940 "{product_name:Archer A9,product_ver:6.0,special_id:4A500000}\n"
941 "{product_name:Archer C90,product_ver:6.0,special_id:55530000}\n",
943 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.1.0\n"),
945 /* We're using a dynamic kernel/rootfs split here */
947 {"factory-boot", 0x00000, 0x20000},
948 {"fs-uboot", 0x20000, 0x20000},
949 {"partition-table", 0x40000, 0x10000},
950 {"radio", 0x50000, 0x10000},
951 {"default-mac", 0x60000, 0x00200},
952 {"pin", 0x60200, 0x00200},
953 {"device-id", 0x60400, 0x00100},
954 {"product-info", 0x60500, 0x0fb00},
955 {"soft-version", 0x70000, 0x01000},
956 {"extra-para", 0x71000, 0x01000},
957 {"support-list", 0x72000, 0x0a000},
958 {"profile", 0x7c000, 0x04000},
959 {"user-config", 0x80000, 0x10000},
960 {"ap-config", 0x90000, 0x10000},
961 {"apdef-config", 0xa0000, 0x10000},
962 {"router-config", 0xb0000, 0x10000},
963 {"firmware", 0xc0000, 0xf00000}, /* Stock: name os-image base 0xc0000 size 0x120000 */
964 /* Stock: name file-system base 0x1e0000 size 0xde0000 */
965 {"log", 0xfc0000, 0x20000},
966 {"certificate", 0xfe0000, 0x10000},
967 {"default-config", 0xff0000, 0x10000},
971 .first_sysupgrade_partition
= "os-image",
972 .last_sysupgrade_partition
= "file-system",
975 /** Firmware layout for the Archer AX23 v1 */
977 .id
= "ARCHER-AX23-V1",
981 "{product_name:Archer AX23,product_ver:1.0,special_id:45550000}\n"
982 "{product_name:Archer AX23,product_ver:1.0,special_id:4A500000}\n"
983 "{product_name:Archer AX23,product_ver:1.0,special_id:4B520000}\n"
984 "{product_name:Archer AX23,product_ver:1.0,special_id:52550000}\n"
985 "{product_name:Archer AX23,product_ver:1.0.0,special_id:43410000}\n"
986 "{product_name:Archer AX23,product_ver:1.0.0,special_id:54570000}\n"
987 "{product_name:Archer AX23,product_ver:1.0.0,special_id:55530000}\n"
988 "{product_name:Archer AX23,product_ver:1.20,special_id:45550000}\n"
989 "{product_name:Archer AX23,product_ver:1.20,special_id:4A500000}\n"
990 "{product_name:Archer AX23,product_ver:1.20,special_id:52550000}\n"
991 "{product_name:Archer AX23,product_ver:1.20,special_id:55530000}\n"
992 "{product_name:Archer AX1800,product_ver:1.20,special_id:45550000}\n"
993 "{product_name:Archer AX1800,product_ver:1.20,special_id:52550000}\n",
995 .soft_ver
= SOFT_VER_TEXT("soft_ver:3.0.3\n"),
998 {"fs-uboot", 0x00000, 0x40000},
999 {"firmware", 0x40000, 0xf60000},
1000 {"default-mac", 0xfa0000, 0x00200},
1001 {"pin", 0xfa0200, 0x00100},
1002 {"device-id", 0xfa0300, 0x00100},
1003 {"product-info", 0xfa0400, 0x0fc00},
1004 {"default-config", 0xfb0000, 0x08000},
1005 {"ap-def-config", 0xfb8000, 0x08000},
1006 {"user-config", 0xfc0000, 0x0a000},
1007 {"ag-config", 0xfca000, 0x04000},
1008 {"certificate", 0xfce000, 0x02000},
1009 {"ap-config", 0xfd0000, 0x06000},
1010 {"router-config", 0xfd6000, 0x06000},
1011 {"favicon", 0xfdc000, 0x02000},
1012 {"logo", 0xfde000, 0x02000},
1013 {"partition-table", 0xfe0000, 0x00800},
1014 {"soft-version", 0xfe0800, 0x00100},
1015 {"support-list", 0xfe0900, 0x00400},
1016 {"profile", 0xfe0d00, 0x03000},
1017 {"extra-para", 0xfe3d00, 0x00100},
1018 {"radio", 0xff0000, 0x10000},
1021 .first_sysupgrade_partition
= "os-image",
1022 .last_sysupgrade_partition
= "file-system",
1024 /** Firmware layout for the C2v3 */
1026 .id
= "ARCHER-C2-V3",
1029 "{product_name:ArcherC2,product_ver:3.0.0,special_id:00000000}\n"
1030 "{product_name:ArcherC2,product_ver:3.0.0,special_id:55530000}\n"
1031 "{product_name:ArcherC2,product_ver:3.0.0,special_id:45550000}\n",
1033 .soft_ver
= SOFT_VER_TEXT("soft_ver:3.0.1\n"),
1035 /** We're using a dynamic kernel/rootfs split here */
1038 {"factory-boot", 0x00000, 0x20000},
1039 {"fs-uboot", 0x20000, 0x10000},
1040 {"firmware", 0x30000, 0x7a0000},
1041 {"user-config", 0x7d0000, 0x04000},
1042 {"default-mac", 0x7e0000, 0x00100},
1043 {"device-id", 0x7e0100, 0x00100},
1044 {"extra-para", 0x7e0200, 0x00100},
1045 {"pin", 0x7e0300, 0x00100},
1046 {"support-list", 0x7e0400, 0x00400},
1047 {"soft-version", 0x7e0800, 0x00400},
1048 {"product-info", 0x7e0c00, 0x01400},
1049 {"partition-table", 0x7e2000, 0x01000},
1050 {"profile", 0x7e3000, 0x01000},
1051 {"default-config", 0x7e4000, 0x04000},
1052 {"merge-config", 0x7ec000, 0x02000},
1053 {"qos-db", 0x7ee000, 0x02000},
1054 {"radio", 0x7f0000, 0x10000},
1058 .first_sysupgrade_partition
= "os-image",
1059 .last_sysupgrade_partition
= "file-system",
1062 /** Firmware layout for the C25v1 */
1064 .id
= "ARCHER-C25-V1",
1067 "{product_name:ArcherC25,product_ver:1.0.0,special_id:00000000}\n"
1068 "{product_name:ArcherC25,product_ver:1.0.0,special_id:55530000}\n"
1069 "{product_name:ArcherC25,product_ver:1.0.0,special_id:45550000}\n",
1071 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.0.0\n"),
1073 /* We're using a dynamic kernel/rootfs split here */
1075 {"factory-boot", 0x00000, 0x20000},
1076 {"fs-uboot", 0x20000, 0x10000},
1077 {"firmware", 0x30000, 0x7a0000}, /* Stock: name os-image base 0x30000 size 0x100000 */
1078 /* Stock: name file-system base 0x130000 size 0x6a0000 */
1079 {"user-config", 0x7d0000, 0x04000},
1080 {"default-mac", 0x7e0000, 0x00100},
1081 {"device-id", 0x7e0100, 0x00100},
1082 {"extra-para", 0x7e0200, 0x00100},
1083 {"pin", 0x7e0300, 0x00100},
1084 {"support-list", 0x7e0400, 0x00400},
1085 {"soft-version", 0x7e0800, 0x00400},
1086 {"product-info", 0x7e0c00, 0x01400},
1087 {"partition-table", 0x7e2000, 0x01000},
1088 {"profile", 0x7e3000, 0x01000},
1089 {"default-config", 0x7e4000, 0x04000},
1090 {"merge-config", 0x7ec000, 0x02000},
1091 {"qos-db", 0x7ee000, 0x02000},
1092 {"radio", 0x7f0000, 0x10000},
1096 .first_sysupgrade_partition
= "os-image",
1097 .last_sysupgrade_partition
= "file-system",
1100 /** Firmware layout for the C58v1 */
1102 .id
= "ARCHER-C58-V1",
1106 "{product_name:Archer C58,product_ver:1.0.0,special_id:00000000}\r\n"
1107 "{product_name:Archer C58,product_ver:1.0.0,special_id:45550000}\r\n"
1108 "{product_name:Archer C58,product_ver:1.0.0,special_id:55530000}\r\n",
1110 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.0.0\n"),
1113 {"fs-uboot", 0x00000, 0x10000},
1114 {"default-mac", 0x10000, 0x00200},
1115 {"pin", 0x10200, 0x00200},
1116 {"product-info", 0x10400, 0x00100},
1117 {"partition-table", 0x10500, 0x00800},
1118 {"soft-version", 0x11300, 0x00200},
1119 {"support-list", 0x11500, 0x00100},
1120 {"device-id", 0x11600, 0x00100},
1121 {"profile", 0x11700, 0x03900},
1122 {"default-config", 0x15000, 0x04000},
1123 {"user-config", 0x19000, 0x04000},
1124 {"firmware", 0x20000, 0x7c8000},
1125 {"certyficate", 0x7e8000, 0x08000},
1126 {"radio", 0x7f0000, 0x10000},
1130 .first_sysupgrade_partition
= "os-image",
1131 .last_sysupgrade_partition
= "file-system",
1134 /** Firmware layout for the C59v1 */
1136 .id
= "ARCHER-C59-V1",
1140 "{product_name:Archer C59,product_ver:1.0.0,special_id:00000000}\r\n"
1141 "{product_name:Archer C59,product_ver:1.0.0,special_id:43410000}\r\n"
1142 "{product_name:Archer C59,product_ver:1.0.0,special_id:45550000}\r\n"
1143 "{product_name:Archer C59,product_ver:1.0.0,special_id:52550000}\r\n"
1144 "{product_name:Archer C59,product_ver:1.0.0,special_id:55530000}\r\n",
1146 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.0.0\n"),
1148 /* We're using a dynamic kernel/rootfs split here */
1150 {"fs-uboot", 0x00000, 0x10000},
1151 {"default-mac", 0x10000, 0x00200},
1152 {"pin", 0x10200, 0x00200},
1153 {"device-id", 0x10400, 0x00100},
1154 {"product-info", 0x10500, 0x0fb00},
1155 {"firmware", 0x20000, 0xe30000},
1156 {"partition-table", 0xe50000, 0x10000},
1157 {"soft-version", 0xe60000, 0x10000},
1158 {"support-list", 0xe70000, 0x10000},
1159 {"profile", 0xe80000, 0x10000},
1160 {"default-config", 0xe90000, 0x10000},
1161 {"user-config", 0xea0000, 0x40000},
1162 {"usb-config", 0xee0000, 0x10000},
1163 {"certificate", 0xef0000, 0x10000},
1164 {"qos-db", 0xf00000, 0x40000},
1165 {"log", 0xfe0000, 0x10000},
1166 {"radio", 0xff0000, 0x10000},
1170 .first_sysupgrade_partition
= "os-image",
1171 .last_sysupgrade_partition
= "file-system",
1174 /** Firmware layout for the C59v2 */
1176 .id
= "ARCHER-C59-V2",
1180 "{product_name:Archer C59,product_ver:2.0.0,special_id:00000000}\r\n"
1181 "{product_name:Archer C59,product_ver:2.0.0,special_id:43410000}\r\n"
1182 "{product_name:Archer C59,product_ver:2.0.0,special_id:45550000}\r\n"
1183 "{product_name:Archer C59,product_ver:2.0.0,special_id:55530000}\r\n",
1185 .soft_ver
= SOFT_VER_TEXT("soft_ver:2.0.0 Build 20161206 rel.7303\n"),
1187 /** We're using a dynamic kernel/rootfs split here */
1189 {"factory-boot", 0x00000, 0x20000},
1190 {"fs-uboot", 0x20000, 0x10000},
1191 {"default-mac", 0x30000, 0x00200},
1192 {"pin", 0x30200, 0x00200},
1193 {"device-id", 0x30400, 0x00100},
1194 {"product-info", 0x30500, 0x0fb00},
1195 {"firmware", 0x40000, 0xe10000},
1196 {"partition-table", 0xe50000, 0x10000},
1197 {"soft-version", 0xe60000, 0x10000},
1198 {"support-list", 0xe70000, 0x10000},
1199 {"profile", 0xe80000, 0x10000},
1200 {"default-config", 0xe90000, 0x10000},
1201 {"user-config", 0xea0000, 0x40000},
1202 {"usb-config", 0xee0000, 0x10000},
1203 {"certificate", 0xef0000, 0x10000},
1204 {"extra-para", 0xf00000, 0x10000},
1205 {"qos-db", 0xf10000, 0x30000},
1206 {"log", 0xfe0000, 0x10000},
1207 {"radio", 0xff0000, 0x10000},
1211 .first_sysupgrade_partition
= "os-image",
1212 .last_sysupgrade_partition
= "file-system",
1215 /** Firmware layout for the Archer C6 v2 (EU/RU/JP) */
1217 .id
= "ARCHER-C6-V2",
1221 "{product_name:Archer A6,product_ver:2.0.0,special_id:45550000}\r\n"
1222 "{product_name:Archer A6,product_ver:2.0.0,special_id:52550000}\r\n"
1223 "{product_name:Archer C6,product_ver:2.0.0,special_id:45550000}\r\n"
1224 "{product_name:Archer C6,product_ver:2.0.0,special_id:52550000}\r\n"
1225 "{product_name:Archer C6,product_ver:2.0.0,special_id:4A500000}\r\n",
1227 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.9.1\n"),
1230 {"fs-uboot", 0x00000, 0x20000},
1231 {"default-mac", 0x20000, 0x00200},
1232 {"pin", 0x20200, 0x00100},
1233 {"product-info", 0x20300, 0x00200},
1234 {"device-id", 0x20500, 0x0fb00},
1235 {"firmware", 0x30000, 0x7a9400},
1236 {"soft-version", 0x7d9400, 0x00100},
1237 {"extra-para", 0x7d9500, 0x00100},
1238 {"support-list", 0x7d9600, 0x00200},
1239 {"profile", 0x7d9800, 0x03000},
1240 {"default-config", 0x7dc800, 0x03000},
1241 {"partition-table", 0x7df800, 0x00800},
1242 {"user-config", 0x7e0000, 0x0c000},
1243 {"certificate", 0x7ec000, 0x04000},
1244 {"radio", 0x7f0000, 0x10000},
1248 .first_sysupgrade_partition
= "os-image",
1249 .last_sysupgrade_partition
= "file-system",
1252 /** Firmware layout for the Archer C6 v2 (US) and A6 v2 (US/TW) */
1254 .id
= "ARCHER-C6-V2-US",
1258 "{product_name:Archer A6,product_ver:2.0.0,special_id:55530000}\n"
1259 "{product_name:Archer A6,product_ver:2.0.0,special_id:54570000}\n"
1260 "{product_name:Archer C6,product_ver:2.0.0,special_id:55530000}\n",
1262 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.9.1\n"),
1265 {"factory-boot", 0x00000, 0x20000},
1266 {"default-mac", 0x20000, 0x00200},
1267 {"pin", 0x20200, 0x00100},
1268 {"product-info", 0x20300, 0x00200},
1269 {"device-id", 0x20500, 0x0fb00},
1270 {"fs-uboot", 0x30000, 0x20000},
1271 {"firmware", 0x50000, 0xf89400},
1272 {"soft-version", 0xfd9400, 0x00100},
1273 {"extra-para", 0xfd9500, 0x00100},
1274 {"support-list", 0xfd9600, 0x00200},
1275 {"profile", 0xfd9800, 0x03000},
1276 {"default-config", 0xfdc800, 0x03000},
1277 {"partition-table", 0xfdf800, 0x00800},
1278 {"user-config", 0xfe0000, 0x0c000},
1279 {"certificate", 0xfec000, 0x04000},
1280 {"radio", 0xff0000, 0x10000},
1283 .first_sysupgrade_partition
= "os-image",
1284 .last_sysupgrade_partition
= "file-system",
1286 /** Firmware layout for the Archer C6 v3 */
1288 .id
= "ARCHER-C6-V3",
1292 "{product_name:Archer C6,product_ver:3.20,special_id:55530000}"
1293 "{product_name:Archer C6,product_ver:3.20,special_id:45550000}"
1294 "{product_name:Archer C6,product_ver:3.20,special_id:52550000}"
1295 "{product_name:Archer C6,product_ver:3.20,special_id:4A500000}"
1296 "{product_name:Archer C6,product_ver:3.20,special_id:4B520000}"
1297 "{product_name:Archer C6,product_ver:3.0.0,special_id:42520000}",
1299 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.0.9\n"),
1302 {"fs-uboot", 0x00000, 0x40000},
1303 {"firmware", 0x40000, 0xf60000},
1304 {"default-mac", 0xfa0000, 0x00200},
1305 {"pin", 0xfa0200, 0x00100},
1306 {"device-id", 0xfa0300, 0x00100},
1307 {"product-info", 0xfa0400, 0x0fc00},
1308 {"default-config", 0xfb0000, 0x08000},
1309 {"ap-def-config", 0xfb8000, 0x08000},
1310 {"user-config", 0xfc0000, 0x0a000},
1311 {"ag-config", 0xfca000, 0x04000},
1312 {"certificate", 0xfce000, 0x02000},
1313 {"ap-config", 0xfd0000, 0x06000},
1314 {"router-config", 0xfd6000, 0x06000},
1315 {"favicon", 0xfdc000, 0x02000},
1316 {"logo", 0xfde000, 0x02000},
1317 {"partition-table", 0xfe0000, 0x00800},
1318 {"soft-version", 0xfe0800, 0x00100},
1319 {"support-list", 0xfe0900, 0x00200},
1320 {"profile", 0xfe0b00, 0x03000},
1321 {"extra-para", 0xfe3b00, 0x00100},
1322 {"radio", 0xff0000, 0x10000},
1325 .first_sysupgrade_partition
= "os-image",
1326 .last_sysupgrade_partition
= "file-system",
1328 /** Firmware layout for the Archer A6 v3 */
1330 .id
= "ARCHER-A6-V3",
1334 "{product_name:Archer A6,product_ver:3.0.0,special_id:43410000}\n"
1335 "{product_name:Archer A6,product_ver:3.0.0,special_id:55530000}\n"
1336 "{product_name:Archer A6,product_ver:3.0.0,special_id:54570000}\n"
1337 "{product_name:Archer A6,product_ver:3.0.0,special_id:4A500000}\n"
1338 "{product_name:Archer A6,product_ver:3.20,special_id:45550000}\n"
1339 "{product_name:Archer A6,product_ver:3.20,special_id:52550000}\n",
1341 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.0.5\n"),
1344 {"fs-uboot", 0x00000, 0x40000},
1345 {"firmware", 0x40000, 0xf60000},
1346 {"default-mac", 0xfa0000, 0x00200},
1347 {"pin", 0xfa0200, 0x00100},
1348 {"device-id", 0xfa0300, 0x00100},
1349 {"product-info", 0xfa0400, 0x0fc00},
1350 {"default-config", 0xfb0000, 0x08000},
1351 {"ap-def-config", 0xfb8000, 0x08000},
1352 {"user-config", 0xfc0000, 0x0a000},
1353 {"ag-config", 0xfca000, 0x04000},
1354 {"certificate", 0xfce000, 0x02000},
1355 {"ap-config", 0xfd0000, 0x06000},
1356 {"router-config", 0xfd6000, 0x06000},
1357 {"favicon", 0xfdc000, 0x02000},
1358 {"logo", 0xfde000, 0x02000},
1359 {"partition-table", 0xfe0000, 0x00800},
1360 {"soft-version", 0xfe0800, 0x00100},
1361 {"support-list", 0xfe0900, 0x00200},
1362 {"profile", 0xfe0b00, 0x03000},
1363 {"extra-para", 0xfe3b00, 0x00100},
1364 {"radio", 0xff0000, 0x10000},
1367 .first_sysupgrade_partition
= "os-image",
1368 .last_sysupgrade_partition
= "file-system",
1370 /** Firmware layout for the Archer C6U v1 */
1372 .id
= "ARCHER-C6U-V1",
1376 "{product_name:Archer C6U,product_ver:1.0.0,special_id:45550000}\n"
1377 "{product_name:Archer C6U,product_ver:1.0.0,special_id:52550000}\n",
1379 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.0.2\n"),
1382 {"fs-uboot", 0x00000, 0x40000},
1383 {"firmware", 0x40000, 0xf60000},
1384 {"default-mac", 0xfa0000, 0x00200},
1385 {"pin", 0xfa0200, 0x00100},
1386 {"device-id", 0xfa0300, 0x00100},
1387 {"product-info", 0xfa0400, 0x0fc00},
1388 {"default-config", 0xfb0000, 0x08000},
1389 {"ap-def-config", 0xfb8000, 0x08000},
1390 {"user-config", 0xfc0000, 0x0c000},
1391 {"certificate", 0xfcc000, 0x04000},
1392 {"ap-config", 0xfd0000, 0x08000},
1393 {"router-config", 0xfd8000, 0x08000},
1394 {"partition-table", 0xfe0000, 0x00800},
1395 {"soft-version", 0xfe0800, 0x00100},
1396 {"support-list", 0xfe0900, 0x00200},
1397 {"profile", 0xfe0b00, 0x03000},
1398 {"extra-para", 0xfe3b00, 0x00100},
1399 {"radio", 0xff0000, 0x10000},
1402 .first_sysupgrade_partition
= "os-image",
1403 .last_sysupgrade_partition
= "file-system",
1405 /** Firmware layout for the C60v1 */
1407 .id
= "ARCHER-C60-V1",
1411 "{product_name:Archer C60,product_ver:1.0.0,special_id:00000000}\r\n"
1412 "{product_name:Archer C60,product_ver:1.0.0,special_id:43410000}\r\n"
1413 "{product_name:Archer C60,product_ver:1.0.0,special_id:45550000}\r\n"
1414 "{product_name:Archer C60,product_ver:1.0.0,special_id:55530000}\r\n",
1416 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.0.0\n"),
1419 {"fs-uboot", 0x00000, 0x10000},
1420 {"default-mac", 0x10000, 0x00200},
1421 {"pin", 0x10200, 0x00200},
1422 {"product-info", 0x10400, 0x00100},
1423 {"partition-table", 0x10500, 0x00800},
1424 {"soft-version", 0x11300, 0x00200},
1425 {"support-list", 0x11500, 0x00100},
1426 {"device-id", 0x11600, 0x00100},
1427 {"profile", 0x11700, 0x03900},
1428 {"default-config", 0x15000, 0x04000},
1429 {"user-config", 0x19000, 0x04000},
1430 {"firmware", 0x20000, 0x7c8000},
1431 {"certyficate", 0x7e8000, 0x08000},
1432 {"radio", 0x7f0000, 0x10000},
1436 .first_sysupgrade_partition
= "os-image",
1437 .last_sysupgrade_partition
= "file-system",
1440 /** Firmware layout for the C60v2 */
1442 .id
= "ARCHER-C60-V2",
1446 "{product_name:Archer C60,product_ver:2.0.0,special_id:42520000}\r\n"
1447 "{product_name:Archer C60,product_ver:2.0.0,special_id:43410000}\r\n"
1448 "{product_name:Archer C60,product_ver:2.0.0,special_id:45550000}\r\n"
1449 "{product_name:Archer C60,product_ver:2.0.0,special_id:55530000}\r\n",
1451 .soft_ver
= SOFT_VER_TEXT("soft_ver:2.0.0\n"),
1454 {"factory-boot", 0x00000, 0x1fb00},
1455 {"default-mac", 0x1fb00, 0x00200},
1456 {"pin", 0x1fd00, 0x00100},
1457 {"product-info", 0x1fe00, 0x00100},
1458 {"device-id", 0x1ff00, 0x00100},
1459 {"fs-uboot", 0x20000, 0x10000},
1460 {"firmware", 0x30000, 0x7a0000},
1461 {"soft-version", 0x7d9500, 0x00100},
1462 {"support-list", 0x7d9600, 0x00100},
1463 {"extra-para", 0x7d9700, 0x00100},
1464 {"profile", 0x7d9800, 0x03000},
1465 {"default-config", 0x7dc800, 0x03000},
1466 {"partition-table", 0x7df800, 0x00800},
1467 {"user-config", 0x7e0000, 0x0c000},
1468 {"certificate", 0x7ec000, 0x04000},
1469 {"radio", 0x7f0000, 0x10000},
1473 .first_sysupgrade_partition
= "os-image",
1474 .last_sysupgrade_partition
= "file-system",
1477 /** Firmware layout for the C60v3 */
1479 .id
= "ARCHER-C60-V3",
1483 "{product_name:Archer C60,product_ver:3.0.0,special_id:42520000}\r\n"
1484 "{product_name:Archer C60,product_ver:3.0.0,special_id:43410000}\r\n"
1485 "{product_name:Archer C60,product_ver:3.0.0,special_id:45550000}\r\n"
1486 "{product_name:Archer C60,product_ver:3.0.0,special_id:55530000}\r\n",
1488 .soft_ver
= SOFT_VER_TEXT("soft_ver:3.0.0\n"),
1491 {"factory-boot", 0x00000, 0x1fb00},
1492 {"default-mac", 0x1fb00, 0x00200},
1493 {"pin", 0x1fd00, 0x00100},
1494 {"product-info", 0x1fe00, 0x00100},
1495 {"device-id", 0x1ff00, 0x00100},
1496 {"fs-uboot", 0x20000, 0x10000},
1497 {"firmware", 0x30000, 0x7a0000},
1498 {"soft-version", 0x7d9500, 0x00100},
1499 {"support-list", 0x7d9600, 0x00100},
1500 {"extra-para", 0x7d9700, 0x00100},
1501 {"profile", 0x7d9800, 0x03000},
1502 {"default-config", 0x7dc800, 0x03000},
1503 {"partition-table", 0x7df800, 0x00800},
1504 {"user-config", 0x7e0000, 0x0c000},
1505 {"certificate", 0x7ec000, 0x04000},
1506 {"radio", 0x7f0000, 0x10000},
1510 .first_sysupgrade_partition
= "os-image",
1511 .last_sysupgrade_partition
= "file-system",
1514 /** Firmware layout for the C5 */
1516 .id
= "ARCHER-C5-V2",
1520 "{product_name:ArcherC5,product_ver:2.0.0,special_id:00000000}\r\n"
1521 "{product_name:ArcherC5,product_ver:2.0.0,special_id:55530000}\r\n"
1522 "{product_name:ArcherC5,product_ver:2.0.0,special_id:4A500000}\r\n", /* JP version */
1524 .soft_ver
= SOFT_VER_DEFAULT
,
1527 {"fs-uboot", 0x00000, 0x40000},
1528 {"os-image", 0x40000, 0x200000},
1529 {"file-system", 0x240000, 0xc00000},
1530 {"default-mac", 0xe40000, 0x00200},
1531 {"pin", 0xe40200, 0x00200},
1532 {"product-info", 0xe40400, 0x00200},
1533 {"partition-table", 0xe50000, 0x10000},
1534 {"soft-version", 0xe60000, 0x00200},
1535 {"support-list", 0xe61000, 0x0f000},
1536 {"profile", 0xe70000, 0x10000},
1537 {"default-config", 0xe80000, 0x10000},
1538 {"user-config", 0xe90000, 0x50000},
1539 {"log", 0xee0000, 0x100000},
1540 {"radio_bk", 0xfe0000, 0x10000},
1541 {"radio", 0xff0000, 0x10000},
1545 .first_sysupgrade_partition
= "os-image",
1546 .last_sysupgrade_partition
= "file-system"
1549 /** Firmware layout for the C7 */
1551 .id
= "ARCHER-C7-V4",
1554 "{product_name:Archer C7,product_ver:4.0.0,special_id:00000000}\n"
1555 "{product_name:Archer C7,product_ver:4.0.0,special_id:41550000}\n"
1556 "{product_name:Archer C7,product_ver:4.0.0,special_id:45550000}\n"
1557 "{product_name:Archer C7,product_ver:4.0.0,special_id:4B520000}\n"
1558 "{product_name:Archer C7,product_ver:4.0.0,special_id:42520000}\n"
1559 "{product_name:Archer C7,product_ver:4.0.0,special_id:4A500000}\n"
1560 "{product_name:Archer C7,product_ver:4.0.0,special_id:52550000}\n"
1561 "{product_name:Archer C7,product_ver:4.0.0,special_id:54570000}\n"
1562 "{product_name:Archer C7,product_ver:4.0.0,special_id:55530000}\n"
1563 "{product_name:Archer C7,product_ver:4.0.0,special_id:43410000}\n",
1565 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.0.0\n"),
1567 /* We're using a dynamic kernel/rootfs split here */
1569 {"factory-boot", 0x00000, 0x20000},
1570 {"fs-uboot", 0x20000, 0x20000},
1571 {"firmware", 0x40000, 0xEC0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
1572 /* Stock: name file-system base 0x160000 size 0xda0000 */
1573 {"default-mac", 0xf00000, 0x00200},
1574 {"pin", 0xf00200, 0x00200},
1575 {"device-id", 0xf00400, 0x00100},
1576 {"product-info", 0xf00500, 0x0fb00},
1577 {"soft-version", 0xf10000, 0x00100},
1578 {"extra-para", 0xf11000, 0x01000},
1579 {"support-list", 0xf12000, 0x0a000},
1580 {"profile", 0xf1c000, 0x04000},
1581 {"default-config", 0xf20000, 0x10000},
1582 {"user-config", 0xf30000, 0x40000},
1583 {"qos-db", 0xf70000, 0x40000},
1584 {"certificate", 0xfb0000, 0x10000},
1585 {"partition-table", 0xfc0000, 0x10000},
1586 {"log", 0xfd0000, 0x20000},
1587 {"radio", 0xff0000, 0x10000},
1591 .first_sysupgrade_partition
= "os-image",
1592 .last_sysupgrade_partition
= "file-system",
1595 /** Firmware layout for the C7 v5*/
1597 .id
= "ARCHER-C7-V5",
1600 "{product_name:Archer C7,product_ver:5.0.0,special_id:00000000}\n"
1601 "{product_name:Archer C7,product_ver:5.0.0,special_id:45550000}\n"
1602 "{product_name:Archer C7,product_ver:5.0.0,special_id:55530000}\n"
1603 "{product_name:Archer C7,product_ver:5.0.0,special_id:43410000}\n"
1604 "{product_name:Archer C7,product_ver:5.0.0,special_id:4A500000}\n"
1605 "{product_name:Archer C7,product_ver:5.0.0,special_id:54570000}\n"
1606 "{product_name:Archer C7,product_ver:5.0.0,special_id:52550000}\n"
1607 "{product_name:Archer C7,product_ver:5.0.0,special_id:4B520000}\n",
1610 .soft_ver
= SOFT_VER_TEXT("soft_ver:7.0.0\n"),
1612 /* We're using a dynamic kernel/rootfs split here */
1614 {"factory-boot", 0x00000, 0x20000},
1615 {"fs-uboot", 0x20000, 0x20000},
1616 {"partition-table", 0x40000, 0x10000},
1617 {"radio", 0x50000, 0x10000},
1618 {"default-mac", 0x60000, 0x00200},
1619 {"pin", 0x60200, 0x00200},
1620 {"device-id", 0x60400, 0x00100},
1621 {"product-info", 0x60500, 0x0fb00},
1622 {"soft-version", 0x70000, 0x01000},
1623 {"extra-para", 0x71000, 0x01000},
1624 {"support-list", 0x72000, 0x0a000},
1625 {"profile", 0x7c000, 0x04000},
1626 {"user-config", 0x80000, 0x40000},
1629 {"firmware", 0xc0000, 0xf00000}, /* Stock: name os-image base 0xc0000 size 0x120000 */
1630 /* Stock: name file-system base 0x1e0000 size 0xde0000 */
1632 {"log", 0xfc0000, 0x20000},
1633 {"certificate", 0xfe0000, 0x10000},
1634 {"default-config", 0xff0000, 0x10000},
1639 .first_sysupgrade_partition
= "os-image",
1640 .last_sysupgrade_partition
= "file-system",
1643 /** Firmware layout for the C9 */
1649 "{product_name:ArcherC9,"
1650 "product_ver:1.0.0,"
1651 "special_id:00000000}\n",
1653 .soft_ver
= SOFT_VER_DEFAULT
,
1656 {"fs-uboot", 0x00000, 0x40000},
1657 {"os-image", 0x40000, 0x200000},
1658 {"file-system", 0x240000, 0xc00000},
1659 {"default-mac", 0xe40000, 0x00200},
1660 {"pin", 0xe40200, 0x00200},
1661 {"product-info", 0xe40400, 0x00200},
1662 {"partition-table", 0xe50000, 0x10000},
1663 {"soft-version", 0xe60000, 0x00200},
1664 {"support-list", 0xe61000, 0x0f000},
1665 {"profile", 0xe70000, 0x10000},
1666 {"default-config", 0xe80000, 0x10000},
1667 {"user-config", 0xe90000, 0x50000},
1668 {"log", 0xee0000, 0x100000},
1669 {"radio_bk", 0xfe0000, 0x10000},
1670 {"radio", 0xff0000, 0x10000},
1674 .first_sysupgrade_partition
= "os-image",
1675 .last_sysupgrade_partition
= "file-system"
1678 /** Firmware layout for the Deco M4R v1 and v2 */
1680 .id
= "DECO-M4R-V1",
1684 "{product_name:M4R,product_ver:1.0.0,special_id:55530000}\n"
1685 "{product_name:M4R,product_ver:1.0.0,special_id:45550000}\n"
1686 "{product_name:M4R,product_ver:1.0.0,special_id:43410000}\n"
1687 "{product_name:M4R,product_ver:1.0.0,special_id:4A500000}\n"
1688 "{product_name:M4R,product_ver:1.0.0,special_id:41550000}\n"
1689 "{product_name:M4R,product_ver:1.0.0,special_id:4B520000}\n"
1690 "{product_name:M4R,product_ver:1.0.0,special_id:49440000}\n"
1691 "{product_name:M4R,product_ver:2.0.0,special_id:55530000}\n"
1692 "{product_name:M4R,product_ver:2.0.0,special_id:45550000}\n"
1693 "{product_name:M4R,product_ver:2.0.0,special_id:43410000}\n"
1694 "{product_name:M4R,product_ver:2.0.0,special_id:4A500000}\n"
1695 "{product_name:M4R,product_ver:2.0.0,special_id:41550000}\n"
1696 "{product_name:M4R,product_ver:2.0.0,special_id:4B520000}\n"
1697 "{product_name:M4R,product_ver:2.0.0,special_id:54570000}\n"
1698 "{product_name:M4R,product_ver:2.0.0,special_id:42340000}\n"
1699 "{product_name:M4R,product_ver:2.0.0,special_id:49440000}\n",
1701 .soft_ver
= SOFT_VER_DEFAULT
,
1704 {"fs-uboot", 0x00000, 0x80000},
1705 {"firmware", 0x80000, 0xe00000},
1706 {"product-info", 0xe80000, 0x05000},
1707 {"default-mac", 0xe85000, 0x01000},
1708 {"device-id", 0xe86000, 0x01000},
1709 {"support-list", 0xe87000, 0x10000},
1710 {"user-config", 0xea7000, 0x10000},
1711 {"device-config", 0xeb7000, 0x10000},
1712 {"group-info", 0xec7000, 0x10000},
1713 {"partition-table", 0xed7000, 0x02000},
1714 {"soft-version", 0xed9000, 0x10000},
1715 {"profile", 0xee9000, 0x10000},
1716 {"default-config", 0xef9000, 0x10000},
1717 {"url-sig", 0xfe0000, 0x10000},
1718 {"radio", 0xff0000, 0x10000},
1721 .first_sysupgrade_partition
= "os-image",
1722 .last_sysupgrade_partition
= "file-system",
1725 /** Firmware layout for the Deco M4R v4 */
1727 .id
= "DECO-M4R-V4",
1731 "{product_name:M4R,product_ver:4.0.0,special_id:55530000}\n"
1732 "{product_name:M4R,product_ver:4.0.0,special_id:45550000}\n"
1733 "{product_name:M4R,product_ver:4.0.0,special_id:4A500000}\n"
1734 "{product_name:M4R,product_ver:4.0.0,special_id:42340000}\n"
1735 "{product_name:M4R,product_ver:4.0.0,special_id:5A470000}\n",
1737 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.0.0\n"),
1740 {"fs-uboot", 0x00000, 0x40000},
1741 {"firmware", 0x40000, 0xf60000},
1742 {"default-mac", 0xfa0000, 0x00300},
1743 {"device-id", 0xfa0300, 0x00100},
1744 {"product-info", 0xfa0400, 0x0fc00},
1745 {"group-info", 0xfb0000, 0x04000},
1746 {"user-config", 0xfb4000, 0x0c000},
1747 {"device-config", 0xfc0000, 0x10000},
1748 {"default-config", 0xfd0000, 0x10000},
1749 {"partition-table", 0xfe0000, 0x00800},
1750 {"soft-version", 0xfe0800, 0x00100},
1751 {"support-list", 0xfe0900, 0x00200},
1752 {"profile", 0xfe0b00, 0x03000},
1753 {"extra-para", 0xfe3b00, 0x00100},
1754 {"radio", 0xff0000, 0x10000},
1757 .first_sysupgrade_partition
= "os-image",
1758 .last_sysupgrade_partition
= "file-system",
1761 /** Firmware layout for the Deco M5 */
1767 "{product_name:M5,product_ver:1.0.0,special_id:55530000}\n"
1768 "{product_name:M5,product_ver:1.0.0,special_id:45550000}\n"
1769 "{product_name:M5,product_ver:1.0.0,special_id:43410000}\n"
1770 "{product_name:M5,product_ver:1.0.0,special_id:4A500000}\n"
1771 "{product_name:M5,product_ver:1.0.0,special_id:41550000}\n"
1772 "{product_name:M5,product_ver:1.0.0,special_id:4B520000}\n"
1773 "{product_name:M5,product_ver:1.0.0,special_id:49440000}\n"
1774 "{product_name:M5,product_ver:3.0.0,special_id:55530000}\n"
1775 "{product_name:M5,product_ver:3.0.0,special_id:45550000}\n"
1776 "{product_name:M5,product_ver:3.0.0,special_id:43410000}\n"
1777 "{product_name:M5,product_ver:3.0.0,special_id:4A500000}\n"
1778 "{product_name:M5,product_ver:3.0.0,special_id:41550000}\n"
1779 "{product_name:M5,product_ver:3.0.0,special_id:4B520000}\n"
1780 "{product_name:M5,product_ver:3.0.0,special_id:49440000}\n"
1781 "{product_name:M5,product_ver:3.0.0,special_id:53570000}\n"
1782 "{product_name:M5,product_ver:3.0.0,special_id:42340000}\n"
1783 "{product_name:M5,product_ver:3.0.0,special_id:54570000}\n"
1784 "{product_name:M5,product_ver:3.2.0,special_id:55530000}\n"
1785 "{product_name:M5,product_ver:3.2.0,special_id:45550000}\n"
1786 "{product_name:M5,product_ver:3.2.0,special_id:43410000}\n"
1787 "{product_name:M5,product_ver:3.2.0,special_id:4A500000}\n"
1788 "{product_name:M5,product_ver:3.2.0,special_id:41550000}\n"
1789 "{product_name:M5,product_ver:3.2.0,special_id:4B520000}\n"
1790 "{product_name:M5,product_ver:3.2.0,special_id:49440000}\n"
1791 "{product_name:M5,product_ver:3.2.0,special_id:53570000}\n"
1792 "{product_name:M5,product_ver:3.2.0,special_id:42340000}\n"
1793 "{product_name:M5,product_ver:3.2.0,special_id:54570000}\n",
1795 .soft_ver
= SOFT_VER_DEFAULT
,
1798 {"SBL1", 0x00000, 0x30000},
1799 {"boot-config_0", 0x30000, 0x10000},
1800 {"MIBIB", 0x40000, 0x10000},
1801 {"boot-config_1", 0x50000, 0x10000},
1802 {"QSEE", 0x60000, 0x60000},
1803 {"CDT", 0xc0000, 0x10000},
1804 {"DDRPARAMS", 0xd0000, 0x10000},
1805 {"uboot-env", 0xe0000, 0x10000},
1806 {"fs-uboot@0", 0xf0000, 0x80000},
1807 {"radio", 0x170000, 0x0fff0},
1808 {"bluetooth-XTAL", 0x17fff0, 0x00010},
1809 {"default-mac", 0x180000, 0x01000},
1810 {"device-id", 0x182000, 0x01000},
1811 {"product-info", 0x183000, 0x05000},
1812 {"support-list", 0x190000, 0x10000},
1813 {"user-config", 0x200000, 0x10000},
1814 {"device-config", 0x210000, 0x10000},
1815 {"group-info", 0x220000, 0x10000},
1816 {"partition-table@0", 0x230000, 0x02000},
1817 {"os-image@0", 0x240000, 0x300000},
1818 {"file-system@0", 0x540000, 0x790000},
1819 {"soft-version@0", 0xcd0000, 0x10000},
1820 {"profile@0", 0xce0000, 0x10000},
1821 {"default-config@0", 0xcf0000, 0x10000},
1822 {"partition-table@1", 0xd00000, 0x02000},
1823 {"fs-uboot@1", 0xd10000, 0x80000},
1824 {"os-image@1", 0xd90000, 0x400000},
1825 {"file-system@1", 0x1190000, 0xc40000},
1826 {"soft-version@1", 0x1dd0000, 0x10000},
1827 {"profile@1", 0x1de0000, 0x10000},
1828 {"default-config@1", 0x1df0000, 0x10000},
1829 {"tm-sig", 0x1e00000, 0x200000},
1833 .partition_names
.partition_table
= "partition-table@1",
1834 .partition_names
.soft_ver
= "soft-version@1",
1835 .partition_names
.os_image
= "os-image@1",
1836 .partition_names
.file_system
= "file-system@1",
1838 .first_sysupgrade_partition
= "os-image@1",
1839 .last_sysupgrade_partition
= "file-system@1"
1842 /** Firmware layout for the Deco S4 v2 */
1848 "{product_name:S4,product_ver:1.0.0,special_id:55530000}\n"
1849 "{product_name:S4,product_ver:1.0.0,special_id:45550000}\n"
1850 "{product_name:S4,product_ver:1.0.0,special_id:43410000}\n"
1851 "{product_name:S4,product_ver:1.0.0,special_id:4A500000}\n"
1852 "{product_name:S4,product_ver:1.0.0,special_id:41550000}\n"
1853 "{product_name:S4,product_ver:1.0.0,special_id:4B520000}\n"
1854 "{product_name:S4,product_ver:2.0.0,special_id:55530000}\n"
1855 "{product_name:S4,product_ver:2.0.0,special_id:45550000}\n"
1856 "{product_name:S4,product_ver:2.0.0,special_id:43410000}\n"
1857 "{product_name:S4,product_ver:2.0.0,special_id:4A500000}\n"
1858 "{product_name:S4,product_ver:2.0.0,special_id:41550000}\n"
1859 "{product_name:S4,product_ver:2.0.0,special_id:4B520000}\n",
1861 .soft_ver
= SOFT_VER_DEFAULT
,
1864 {"fs-uboot", 0x00000, 0x80000},
1865 {"product-info", 0x80000, 0x05000},
1866 {"default-mac", 0x85000, 0x01000},
1867 {"device-id", 0x86000, 0x01000},
1868 {"support-list", 0x87000, 0x10000},
1869 {"user-config", 0xa7000, 0x10000},
1870 {"device-config", 0xb7000, 0x10000},
1871 {"group-info", 0xc7000, 0x10000},
1872 {"partition-table", 0xd7000, 0x02000},
1873 {"soft-version", 0xd9000, 0x10000},
1874 {"profile", 0xe9000, 0x10000},
1875 {"default-config", 0xf9000, 0x10000},
1876 {"url-sig", 0x1e0000, 0x10000},
1877 {"radio", 0x1f0000, 0x10000},
1878 {"firmware", 0x200000, 0xe00000},
1881 .first_sysupgrade_partition
= "os-image",
1882 .last_sysupgrade_partition
= "file-system",
1885 /** Firmware layout for the EAP120 */
1888 .vendor
= "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1891 "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1893 .soft_ver
= SOFT_VER_DEFAULT
,
1896 {"fs-uboot", 0x00000, 0x20000},
1897 {"partition-table", 0x20000, 0x02000},
1898 {"default-mac", 0x30000, 0x00020},
1899 {"support-list", 0x31000, 0x00100},
1900 {"product-info", 0x31100, 0x00100},
1901 {"soft-version", 0x32000, 0x00100},
1902 {"os-image", 0x40000, 0x180000},
1903 {"file-system", 0x1c0000, 0x600000},
1904 {"user-config", 0x7c0000, 0x10000},
1905 {"backup-config", 0x7d0000, 0x10000},
1906 {"log", 0x7e0000, 0x10000},
1907 {"radio", 0x7f0000, 0x10000},
1911 .first_sysupgrade_partition
= "os-image",
1912 .last_sysupgrade_partition
= "file-system"
1915 /** Firmware layout for the EAP225-Outdoor v1 */
1917 .id
= "EAP225-OUTDOOR-V1",
1920 "EAP225-Outdoor(TP-Link|UN|AC1200-D):1.0\r\n",
1921 .part_trail
= PART_TRAIL_NONE
,
1922 .soft_ver
= SOFT_VER_DEFAULT
,
1923 .soft_ver_compat_level
= 2,
1926 {"fs-uboot", 0x00000, 0x20000},
1927 {"partition-table", 0x20000, 0x02000},
1928 {"default-mac", 0x30000, 0x01000},
1929 {"support-list", 0x31000, 0x00100},
1930 {"product-info", 0x31100, 0x00400},
1931 {"soft-version", 0x32000, 0x00100},
1932 {"firmware", 0x40000, 0xd80000},
1933 {"user-config", 0xdc0000, 0x30000},
1934 {"mutil-log", 0xf30000, 0x80000},
1935 {"oops", 0xfb0000, 0x40000},
1936 {"radio", 0xff0000, 0x10000},
1940 .first_sysupgrade_partition
= "os-image",
1941 .last_sysupgrade_partition
= "file-system"
1944 /** Firmware layout for the EAP225 v1 */
1949 "EAP225(TP-LINK|UN|AC1200-D):1.0\r\n",
1950 .part_trail
= PART_TRAIL_NONE
,
1951 .soft_ver
= SOFT_VER_DEFAULT
,
1954 {"fs-uboot", 0x00000, 0x20000},
1955 {"partition-table", 0x20000, 0x02000},
1956 {"default-mac", 0x30000, 0x01000},
1957 {"support-list", 0x31000, 0x00100},
1958 {"product-info", 0x31100, 0x00400},
1959 {"soft-version", 0x32000, 0x00100},
1960 {"firmware", 0x40000, 0xd80000},
1961 {"user-config", 0xdc0000, 0x30000},
1962 {"radio", 0xff0000, 0x10000},
1966 .first_sysupgrade_partition
= "os-image",
1967 .last_sysupgrade_partition
= "file-system"
1970 /** Firmware layout for the EAP225 v3
1971 * Also compatible with:
1974 * - EAP225-Outdoor v1
1975 * - EAP225-Outdoor v3
1981 "EAP225(TP-Link|UN|AC1350-D):3.0\r\n"
1982 "EAP225(TP-Link|UN|AC1350-D):3.20\r\n"
1983 "EAP225(TP-Link|UN|AC1350-D):4.0 CA\r\n"
1984 "EAP225-Outdoor(TP-Link|UN|AC1200-D):1.0\r\n"
1985 "EAP225-Outdoor(TP-Link|UN|AC1200-D):3.0 CA,JP\r\n",
1986 .part_trail
= PART_TRAIL_NONE
,
1987 .soft_ver
= SOFT_VER_DEFAULT
,
1988 .soft_ver_compat_level
= 2,
1991 {"fs-uboot", 0x00000, 0x20000},
1992 {"partition-table", 0x20000, 0x02000},
1993 {"default-mac", 0x30000, 0x01000},
1994 {"support-list", 0x31000, 0x00100},
1995 {"product-info", 0x31100, 0x00400},
1996 {"soft-version", 0x32000, 0x00100},
1997 {"firmware", 0x40000, 0xd80000},
1998 {"user-config", 0xdc0000, 0x30000},
1999 {"mutil-log", 0xf30000, 0x80000},
2000 {"oops", 0xfb0000, 0x40000},
2001 {"radio", 0xff0000, 0x10000},
2005 .first_sysupgrade_partition
= "os-image",
2006 .last_sysupgrade_partition
= "file-system"
2009 /** Firmware layout for the EAP225-Wall v2 */
2011 .id
= "EAP225-WALL-V2",
2014 "EAP225-Wall(TP-Link|UN|AC1200-D):2.0\r\n",
2015 .part_trail
= PART_TRAIL_NONE
,
2016 .soft_ver
= SOFT_VER_DEFAULT
,
2017 .soft_ver_compat_level
= 1,
2020 {"fs-uboot", 0x00000, 0x20000},
2021 {"partition-table", 0x20000, 0x02000},
2022 {"default-mac", 0x30000, 0x01000},
2023 {"support-list", 0x31000, 0x00100},
2024 {"product-info", 0x31100, 0x00400},
2025 {"soft-version", 0x32000, 0x00100},
2026 {"firmware", 0x40000, 0xd80000},
2027 {"user-config", 0xdc0000, 0x30000},
2028 {"mutil-log", 0xf30000, 0x80000},
2029 {"oops", 0xfb0000, 0x40000},
2030 {"radio", 0xff0000, 0x10000},
2034 .first_sysupgrade_partition
= "os-image",
2035 .last_sysupgrade_partition
= "file-system"
2038 /** Firmware layout for the EAP235-Wall v1 */
2040 .id
= "EAP235-WALL-V1",
2043 "EAP235-Wall(TP-Link|UN|AC1200-D):1.0\r\n",
2044 .part_trail
= PART_TRAIL_NONE
,
2045 .soft_ver
= SOFT_VER_NUMERIC(3, 0, 0),
2046 .soft_ver_compat_level
= 1,
2049 {"fs-uboot", 0x00000, 0x80000},
2050 {"partition-table", 0x80000, 0x02000},
2051 {"default-mac", 0x90000, 0x01000},
2052 {"support-list", 0x91000, 0x00100},
2053 {"product-info", 0x91100, 0x00400},
2054 {"soft-version", 0x92000, 0x00100},
2055 {"firmware", 0xa0000, 0xd20000},
2056 {"user-config", 0xdc0000, 0x30000},
2057 {"mutil-log", 0xf30000, 0x80000},
2058 {"oops", 0xfb0000, 0x40000},
2059 {"radio", 0xff0000, 0x10000},
2063 .first_sysupgrade_partition
= "os-image",
2064 .last_sysupgrade_partition
= "file-system"
2067 /** Firmware layout for the EAP245 v1 */
2072 "EAP245(TP-LINK|UN|AC1750-D):1.0\r\n",
2073 .part_trail
= PART_TRAIL_NONE
,
2074 .soft_ver
= SOFT_VER_DEFAULT
,
2077 {"fs-uboot", 0x00000, 0x20000},
2078 {"partition-table", 0x20000, 0x02000},
2079 {"default-mac", 0x30000, 0x01000},
2080 {"support-list", 0x31000, 0x00100},
2081 {"product-info", 0x31100, 0x00400},
2082 {"soft-version", 0x32000, 0x00100},
2083 {"firmware", 0x40000, 0xd80000},
2084 {"user-config", 0xdc0000, 0x30000},
2085 {"radio", 0xff0000, 0x10000},
2089 .first_sysupgrade_partition
= "os-image",
2090 .last_sysupgrade_partition
= "file-system"
2093 /** Firmware layout for the EAP245 v3 */
2098 "EAP245(TP-Link|UN|AC1750-D):3.0\r\n"
2099 "EAP265 HD(TP-Link|UN|AC1750-D):1.0",
2100 .part_trail
= PART_TRAIL_NONE
,
2101 .soft_ver
= SOFT_VER_DEFAULT
,
2102 .soft_ver_compat_level
= 1,
2104 /** Firmware partition with dynamic kernel/rootfs split */
2106 {"factroy-boot", 0x00000, 0x40000},
2107 {"fs-uboot", 0x40000, 0x40000},
2108 {"partition-table", 0x80000, 0x10000},
2109 {"default-mac", 0x90000, 0x01000},
2110 {"support-list", 0x91000, 0x00100},
2111 {"product-info", 0x91100, 0x00400},
2112 {"soft-version", 0x92000, 0x00100},
2113 {"radio", 0xa0000, 0x10000},
2114 {"extra-para", 0xb0000, 0x10000},
2115 {"firmware", 0xc0000, 0xe40000},
2116 {"config", 0xf00000, 0x30000},
2117 {"mutil-log", 0xf30000, 0x80000},
2118 {"oops", 0xfb0000, 0x40000},
2122 .first_sysupgrade_partition
= "os-image",
2123 .last_sysupgrade_partition
= "file-system"
2126 /** Firmware layout for the EAP610 v3/EAP613 v1 */
2129 .soft_ver
= SOFT_VER_DEFAULT
,
2130 .soft_ver_compat_level
= 1,
2133 "EAP610(TP-Link|UN|AX1800-D):3.0\r\n"
2134 "EAP610(TP-Link|JP|AX1800-D):3.0\r\n"
2135 "EAP610(TP-Link|EG|AX1800-D):3.0\r\n"
2136 "EAP610(TP-Link|CA|AX1800-D):3.0\r\n"
2137 "EAP613(TP-Link|UN|AX1800-D):1.0 JP\r\n",
2138 .part_trail
= PART_TRAIL_NONE
,
2141 {"fs-uboot", 0x00000, 0x80000},
2142 {"partition-table", 0x80000, 0x02000},
2143 {"default-mac", 0x90000, 0x01000},
2144 {"support-list", 0x91000, 0x00100},
2145 {"product-info", 0x91100, 0x00400},
2146 {"soft-version", 0x92000, 0x00100},
2147 {"firmware", 0xa0000, 0xcf0000},
2148 {"user-config", 0xd90000, 0x60000},
2149 {"mutil-log", 0xf30000, 0x80000},
2150 {"oops", 0xfb0000, 0x40000},
2151 {"radio", 0xff0000, 0x10000},
2155 .first_sysupgrade_partition
= "os-image",
2156 .last_sysupgrade_partition
= "file-system"
2159 /** Firmware layout for the EAP615-Wall v1 */
2161 .id
= "EAP615-WALL-V1",
2162 .soft_ver
= SOFT_VER_DEFAULT
,
2163 .soft_ver_compat_level
= 2,
2166 "EAP615-Wall(TP-Link|UN|AX1800-D):1.0\r\n"
2167 "EAP615-Wall(TP-Link|CA|AX1800-D):1.0\r\n"
2168 "EAP615-Wall(TP-Link|JP|AX1800-D):1.0\r\n",
2169 .part_trail
= PART_TRAIL_NONE
,
2172 {"fs-uboot", 0x00000, 0x80000},
2173 {"partition-table", 0x80000, 0x02000},
2174 {"default-mac", 0x90000, 0x01000},
2175 {"support-list", 0x91000, 0x00100},
2176 {"product-info", 0x91100, 0x00400},
2177 {"soft-version", 0x92000, 0x00100},
2178 {"firmware", 0xa0000, 0xcf0000},
2179 {"user-config", 0xd90000, 0x60000},
2180 {"mutil-log", 0xf30000, 0x80000},
2181 {"oops", 0xfb0000, 0x40000},
2182 {"radio", 0xff0000, 0x10000},
2186 .first_sysupgrade_partition
= "os-image",
2187 .last_sysupgrade_partition
= "file-system"
2190 /** Firmware layout for the TL-WA1201 v2 */
2192 .id
= "TL-WA1201-V2",
2196 "{product_name:TL-WA1201,product_ver:2.0.0,special_id:45550000}\n"
2197 "{product_name:TL-WA1201,product_ver:2.0.0,special_id:55530000}\n",
2199 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.0.1 Build 20200709 rel.66244\n"),
2202 {"fs-uboot", 0x00000, 0x20000},
2203 {"default-mac", 0x20000, 0x00200},
2204 {"pin", 0x20200, 0x00100},
2205 {"product-info", 0x20300, 0x00200},
2206 {"device-id", 0x20500, 0x0fb00},
2207 {"firmware", 0x30000, 0xce0000},
2208 {"portal-logo", 0xd10000, 0x20000},
2209 {"portal-back", 0xd30000, 0x200000},
2210 {"soft-version", 0xf30000, 0x00200},
2211 {"extra-para", 0xf30200, 0x00200},
2212 {"support-list", 0xf30400, 0x00200},
2213 {"profile", 0xf30600, 0x0fa00},
2214 {"apdef-config", 0xf40000, 0x10000},
2215 {"ap-config", 0xf50000, 0x10000},
2216 {"redef-config", 0xf60000, 0x10000},
2217 {"re-config", 0xf70000, 0x10000},
2218 {"multidef-config", 0xf80000, 0x10000},
2219 {"multi-config", 0xf90000, 0x10000},
2220 {"clientdef-config", 0xfa0000, 0x10000},
2221 {"client-config", 0xfb0000, 0x10000},
2222 {"partition-table", 0xfc0000, 0x10000},
2223 {"user-config", 0xfd0000, 0x10000},
2224 {"certificate", 0xfe0000, 0x10000},
2225 {"radio", 0xff0000, 0x10000},
2228 .first_sysupgrade_partition
= "os-image",
2229 .last_sysupgrade_partition
= "file-system",
2232 /** Firmware layout for the TL-WA850RE v2 */
2234 .id
= "TLWA850REV2",
2238 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55530000}\n"
2239 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:00000000}\n"
2240 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55534100}\n"
2241 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:45550000}\n"
2242 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4B520000}\n"
2243 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:42520000}\n"
2244 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4A500000}\n"
2245 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:43410000}\n"
2246 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:41550000}\n"
2247 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:52550000}\n",
2249 .soft_ver
= SOFT_VER_DEFAULT
,
2252 576KB were moved from file-system to os-image
2253 in comparison to the stock image
2256 {"fs-uboot", 0x00000, 0x20000},
2257 {"firmware", 0x20000, 0x390000},
2258 {"partition-table", 0x3b0000, 0x02000},
2259 {"default-mac", 0x3c0000, 0x00020},
2260 {"pin", 0x3c0100, 0x00020},
2261 {"product-info", 0x3c1000, 0x01000},
2262 {"soft-version", 0x3c2000, 0x00100},
2263 {"support-list", 0x3c3000, 0x01000},
2264 {"profile", 0x3c4000, 0x08000},
2265 {"user-config", 0x3d0000, 0x10000},
2266 {"default-config", 0x3e0000, 0x10000},
2267 {"radio", 0x3f0000, 0x10000},
2271 .first_sysupgrade_partition
= "os-image",
2272 .last_sysupgrade_partition
= "file-system"
2275 /** Firmware layout for the TL-WA855RE v1 */
2277 .id
= "TLWA855REV1",
2281 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:00000000}\n"
2282 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:55530000}\n"
2283 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:45550000}\n"
2284 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4B520000}\n"
2285 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:42520000}\n"
2286 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4A500000}\n"
2287 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:43410000}\n"
2288 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:41550000}\n"
2289 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:52550000}\n",
2291 .soft_ver
= SOFT_VER_DEFAULT
,
2294 {"fs-uboot", 0x00000, 0x20000},
2295 {"os-image", 0x20000, 0x150000},
2296 {"file-system", 0x170000, 0x240000},
2297 {"partition-table", 0x3b0000, 0x02000},
2298 {"default-mac", 0x3c0000, 0x00020},
2299 {"pin", 0x3c0100, 0x00020},
2300 {"product-info", 0x3c1000, 0x01000},
2301 {"soft-version", 0x3c2000, 0x00100},
2302 {"support-list", 0x3c3000, 0x01000},
2303 {"profile", 0x3c4000, 0x08000},
2304 {"user-config", 0x3d0000, 0x10000},
2305 {"default-config", 0x3e0000, 0x10000},
2306 {"radio", 0x3f0000, 0x10000},
2310 .first_sysupgrade_partition
= "os-image",
2311 .last_sysupgrade_partition
= "file-system"
2314 /** Firmware layout for the TL-WPA8630P v2 (EU)*/
2316 .id
= "TL-WPA8630P-V2.0-EU",
2320 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:45550000}\n",
2322 .soft_ver
= SOFT_VER_DEFAULT
,
2325 {"factory-uboot", 0x00000, 0x20000},
2326 {"fs-uboot", 0x20000, 0x20000},
2327 {"firmware", 0x40000, 0x5e0000},
2328 {"partition-table", 0x620000, 0x02000},
2329 {"default-mac", 0x630000, 0x00020},
2330 {"pin", 0x630100, 0x00020},
2331 {"device-id", 0x630200, 0x00030},
2332 {"product-info", 0x631100, 0x01000},
2333 {"extra-para", 0x632100, 0x01000},
2334 {"soft-version", 0x640000, 0x01000},
2335 {"support-list", 0x641000, 0x01000},
2336 {"profile", 0x642000, 0x08000},
2337 {"user-config", 0x650000, 0x10000},
2338 {"default-config", 0x660000, 0x10000},
2339 {"default-nvm", 0x670000, 0xc0000},
2340 {"default-pib", 0x730000, 0x40000},
2341 {"radio", 0x7f0000, 0x10000},
2345 .first_sysupgrade_partition
= "os-image",
2346 .last_sysupgrade_partition
= "file-system"
2349 /** Firmware layout for the TL-WPA8630P v2 (INT)*/
2351 .id
= "TL-WPA8630P-V2-INT",
2355 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:41550000}\n"
2356 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:44450000}\n"
2357 "{product_name:TL-WPA8630P,product_ver:2.1.0,special_id:41550000}\n",
2359 .soft_ver
= SOFT_VER_DEFAULT
,
2362 {"factory-uboot", 0x00000, 0x20000},
2363 {"fs-uboot", 0x20000, 0x20000},
2364 {"firmware", 0x40000, 0x5e0000},
2365 {"partition-table", 0x620000, 0x02000},
2366 {"extra-para", 0x632100, 0x01000},
2367 {"soft-version", 0x640000, 0x01000},
2368 {"support-list", 0x641000, 0x01000},
2369 {"profile", 0x642000, 0x08000},
2370 {"user-config", 0x650000, 0x10000},
2371 {"default-config", 0x660000, 0x10000},
2372 {"default-nvm", 0x670000, 0xc0000},
2373 {"default-pib", 0x730000, 0x40000},
2374 {"default-mac", 0x7e0000, 0x00020},
2375 {"pin", 0x7e0100, 0x00020},
2376 {"device-id", 0x7e0200, 0x00030},
2377 {"product-info", 0x7e1100, 0x01000},
2378 {"radio", 0x7f0000, 0x10000},
2382 .first_sysupgrade_partition
= "os-image",
2383 .last_sysupgrade_partition
= "file-system"
2386 /** Firmware layout for the TL-WPA8630P v2.1 (EU)*/
2388 .id
= "TL-WPA8630P-V2.1-EU",
2392 "{product_name:TL-WPA8630P,product_ver:2.1.0,special_id:45550000}\n",
2394 .soft_ver
= SOFT_VER_DEFAULT
,
2397 {"factory-uboot", 0x00000, 0x20000},
2398 {"fs-uboot", 0x20000, 0x20000},
2399 {"firmware", 0x40000, 0x5e0000},
2400 {"extra-para", 0x680000, 0x01000},
2401 {"product-info", 0x690000, 0x01000},
2402 {"partition-table", 0x6a0000, 0x02000},
2403 {"soft-version", 0x6b0000, 0x01000},
2404 {"support-list", 0x6b1000, 0x01000},
2405 {"profile", 0x6b2000, 0x08000},
2406 {"user-config", 0x6c0000, 0x10000},
2407 {"default-config", 0x6d0000, 0x10000},
2408 {"default-nvm", 0x6e0000, 0xc0000},
2409 {"default-pib", 0x7a0000, 0x40000},
2410 {"default-mac", 0x7e0000, 0x00020},
2411 {"pin", 0x7e0100, 0x00020},
2412 {"device-id", 0x7e0200, 0x00030},
2413 {"radio", 0x7f0000, 0x10000},
2417 .first_sysupgrade_partition
= "os-image",
2418 .last_sysupgrade_partition
= "file-system"
2421 /** Firmware layout for the TL-WPA8631P v3 */
2423 .id
= "TL-WPA8631P-V3",
2427 "{product_name:TL-WPA8631P,product_ver:3.0.0,special_id:41550000}\n"
2428 "{product_name:TL-WPA8631P,product_ver:3.0.0,special_id:45550000}\n"
2429 "{product_name:TL-WPA8631P,product_ver:3.0.0,special_id:55530000}\n"
2430 "{product_name:TL-WPA8631P,product_ver:4.0.0,special_id:41550000}\n"
2431 "{product_name:TL-WPA8631P,product_ver:4.0.0,special_id:45550000}\n"
2432 "{product_name:TL-WPA8631P,product_ver:4.0.0,special_id:55530000}\n"
2433 "{product_name:TL-WPA8635P,product_ver:3.0.0,special_id:46520000}\n",
2435 .soft_ver
= SOFT_VER_DEFAULT
,
2438 {"fs-uboot", 0x00000, 0x20000},
2439 {"firmware", 0x20000, 0x710000},
2440 {"partition-table", 0x730000, 0x02000},
2441 {"default-mac", 0x732000, 0x00020},
2442 {"pin", 0x732100, 0x00020},
2443 {"device-id", 0x732200, 0x00030},
2444 {"default-region", 0x732300, 0x00010},
2445 {"product-info", 0x732400, 0x00200},
2446 {"extra-para", 0x732600, 0x00200},
2447 {"soft-version", 0x732800, 0x00100},
2448 {"support-list", 0x732900, 0x00200},
2449 {"profile", 0x732b00, 0x00100},
2450 {"default-config", 0x732c00, 0x00800},
2451 {"plc-type", 0x733400, 0x00020},
2452 {"default-pib", 0x733500, 0x06000},
2453 {"user-config", 0x740000, 0x10000},
2454 {"plc-pib", 0x750000, 0x10000},
2455 {"plc-nvm", 0x760000, 0x90000},
2456 {"radio", 0x7f0000, 0x10000},
2460 .first_sysupgrade_partition
= "os-image",
2461 .last_sysupgrade_partition
= "file-system"
2464 /** Firmware layout for the TL-WR1043 v5 */
2466 .id
= "TLWR1043NV5",
2470 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:45550000}\n"
2471 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:55530000}\n",
2473 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.0.0\n"),
2475 {"factory-boot", 0x00000, 0x20000},
2476 {"fs-uboot", 0x20000, 0x20000},
2477 {"firmware", 0x40000, 0xec0000},
2478 {"default-mac", 0xf00000, 0x00200},
2479 {"pin", 0xf00200, 0x00200},
2480 {"device-id", 0xf00400, 0x00100},
2481 {"product-info", 0xf00500, 0x0fb00},
2482 {"soft-version", 0xf10000, 0x01000},
2483 {"extra-para", 0xf11000, 0x01000},
2484 {"support-list", 0xf12000, 0x0a000},
2485 {"profile", 0xf1c000, 0x04000},
2486 {"default-config", 0xf20000, 0x10000},
2487 {"user-config", 0xf30000, 0x40000},
2488 {"qos-db", 0xf70000, 0x40000},
2489 {"certificate", 0xfb0000, 0x10000},
2490 {"partition-table", 0xfc0000, 0x10000},
2491 {"log", 0xfd0000, 0x20000},
2492 {"radio", 0xff0000, 0x10000},
2495 .first_sysupgrade_partition
= "os-image",
2496 .last_sysupgrade_partition
= "file-system"
2499 /** Firmware layout for the TL-WR1043 v4 */
2501 .id
= "TLWR1043NDV4",
2505 "{product_name:TL-WR1043ND,product_ver:4.0.0,special_id:45550000}\n",
2507 .soft_ver
= SOFT_VER_DEFAULT
,
2509 /* We're using a dynamic kernel/rootfs split here */
2511 {"fs-uboot", 0x00000, 0x20000},
2512 {"firmware", 0x20000, 0xf30000},
2513 {"default-mac", 0xf50000, 0x00200},
2514 {"pin", 0xf50200, 0x00200},
2515 {"product-info", 0xf50400, 0x0fc00},
2516 {"soft-version", 0xf60000, 0x0b000},
2517 {"support-list", 0xf6b000, 0x04000},
2518 {"profile", 0xf70000, 0x04000},
2519 {"default-config", 0xf74000, 0x0b000},
2520 {"user-config", 0xf80000, 0x40000},
2521 {"partition-table", 0xfc0000, 0x10000},
2522 {"log", 0xfd0000, 0x20000},
2523 {"radio", 0xff0000, 0x10000},
2527 .first_sysupgrade_partition
= "os-image",
2528 .last_sysupgrade_partition
= "file-system"
2531 /** Firmware layout for the TL-WR902AC v1 */
2533 .id
= "TL-WR902AC-V1",
2537 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:45550000}\n"
2538 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:55530000}\n",
2540 .soft_ver
= SOFT_VER_DEFAULT
,
2543 384KB were moved from file-system to os-image
2544 in comparison to the stock image
2547 {"fs-uboot", 0x00000, 0x20000},
2548 {"firmware", 0x20000, 0x730000},
2549 {"default-mac", 0x750000, 0x00200},
2550 {"pin", 0x750200, 0x00200},
2551 {"product-info", 0x750400, 0x0fc00},
2552 {"soft-version", 0x760000, 0x0b000},
2553 {"support-list", 0x76b000, 0x04000},
2554 {"profile", 0x770000, 0x04000},
2555 {"default-config", 0x774000, 0x0b000},
2556 {"user-config", 0x780000, 0x40000},
2557 {"partition-table", 0x7c0000, 0x10000},
2558 {"log", 0x7d0000, 0x20000},
2559 {"radio", 0x7f0000, 0x10000},
2563 .first_sysupgrade_partition
= "os-image",
2564 .last_sysupgrade_partition
= "file-system",
2567 /** Firmware layout for the TL-WR941HP v1 */
2569 .id
= "TL-WR941HP-V1",
2573 "{product_name:TL-WR941HP,product_ver:1.0.0,special_id:00000000}\n",
2575 .soft_ver
= SOFT_VER_DEFAULT
,
2578 {"fs-uboot", 0x00000, 0x20000},
2579 {"firmware", 0x20000, 0x730000},
2580 {"default-mac", 0x750000, 0x00200},
2581 {"pin", 0x750200, 0x00200},
2582 {"product-info", 0x750400, 0x0fc00},
2583 {"soft-version", 0x760000, 0x0b000},
2584 {"support-list", 0x76b000, 0x04000},
2585 {"profile", 0x770000, 0x04000},
2586 {"default-config", 0x774000, 0x0b000},
2587 {"user-config", 0x780000, 0x40000},
2588 {"partition-table", 0x7c0000, 0x10000},
2589 {"log", 0x7d0000, 0x20000},
2590 {"radio", 0x7f0000, 0x10000},
2594 .first_sysupgrade_partition
= "os-image",
2595 .last_sysupgrade_partition
= "file-system",
2598 /** Firmware layout for the TL-WR942N V1 */
2604 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:00000000}\r\n"
2605 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:52550000}\r\n",
2607 .soft_ver
= SOFT_VER_DEFAULT
,
2610 {"fs-uboot", 0x00000, 0x20000},
2611 {"firmware", 0x20000, 0xe20000},
2612 {"default-mac", 0xe40000, 0x00200},
2613 {"pin", 0xe40200, 0x00200},
2614 {"product-info", 0xe40400, 0x0fc00},
2615 {"partition-table", 0xe50000, 0x10000},
2616 {"soft-version", 0xe60000, 0x10000},
2617 {"support-list", 0xe70000, 0x10000},
2618 {"profile", 0xe80000, 0x10000},
2619 {"default-config", 0xe90000, 0x10000},
2620 {"user-config", 0xea0000, 0x40000},
2621 {"qos-db", 0xee0000, 0x40000},
2622 {"certificate", 0xf20000, 0x10000},
2623 {"usb-config", 0xfb0000, 0x10000},
2624 {"log", 0xfc0000, 0x20000},
2625 {"radio-bk", 0xfe0000, 0x10000},
2626 {"radio", 0xff0000, 0x10000},
2630 .first_sysupgrade_partition
= "os-image",
2631 .last_sysupgrade_partition
= "file-system",
2634 /** Firmware layout for the RE200 v2 */
2640 "{product_name:RE200,product_ver:2.0.0,special_id:00000000}\n"
2641 "{product_name:RE200,product_ver:2.0.0,special_id:41520000}\n"
2642 "{product_name:RE200,product_ver:2.0.0,special_id:41550000}\n"
2643 "{product_name:RE200,product_ver:2.0.0,special_id:42520000}\n"
2644 "{product_name:RE200,product_ver:2.0.0,special_id:43410000}\n"
2645 "{product_name:RE200,product_ver:2.0.0,special_id:45530000}\n"
2646 "{product_name:RE200,product_ver:2.0.0,special_id:45550000}\n"
2647 "{product_name:RE200,product_ver:2.0.0,special_id:49440000}\n"
2648 "{product_name:RE200,product_ver:2.0.0,special_id:4a500000}\n"
2649 "{product_name:RE200,product_ver:2.0.0,special_id:4b520000}\n"
2650 "{product_name:RE200,product_ver:2.0.0,special_id:52550000}\n"
2651 "{product_name:RE200,product_ver:2.0.0,special_id:54570000}\n"
2652 "{product_name:RE200,product_ver:2.0.0,special_id:55530000}\n",
2654 .soft_ver
= SOFT_VER_DEFAULT
,
2657 {"fs-uboot", 0x00000, 0x20000},
2658 {"firmware", 0x20000, 0x7a0000},
2659 {"partition-table", 0x7c0000, 0x02000},
2660 {"default-mac", 0x7c2000, 0x00020},
2661 {"pin", 0x7c2100, 0x00020},
2662 {"product-info", 0x7c3100, 0x01000},
2663 {"soft-version", 0x7c4200, 0x01000},
2664 {"support-list", 0x7c5200, 0x01000},
2665 {"profile", 0x7c6200, 0x08000},
2666 {"config-info", 0x7ce200, 0x00400},
2667 {"user-config", 0x7d0000, 0x10000},
2668 {"default-config", 0x7e0000, 0x10000},
2669 {"radio", 0x7f0000, 0x10000},
2673 .first_sysupgrade_partition
= "os-image",
2674 .last_sysupgrade_partition
= "file-system"
2677 /** Firmware layout for the RE200 v3 */
2683 "{product_name:RE200,product_ver:3.0.0,special_id:00000000}\n"
2684 "{product_name:RE200,product_ver:3.0.0,special_id:41520000}\n"
2685 "{product_name:RE200,product_ver:3.0.0,special_id:41550000}\n"
2686 "{product_name:RE200,product_ver:3.0.0,special_id:42520000}\n"
2687 "{product_name:RE200,product_ver:3.0.0,special_id:43410000}\n"
2688 "{product_name:RE200,product_ver:3.0.0,special_id:45470000}\n"
2689 "{product_name:RE200,product_ver:3.0.0,special_id:45530000}\n"
2690 "{product_name:RE200,product_ver:3.0.0,special_id:45550000}\n"
2691 "{product_name:RE200,product_ver:3.0.0,special_id:49440000}\n"
2692 "{product_name:RE200,product_ver:3.0.0,special_id:4A500000}\n"
2693 "{product_name:RE200,product_ver:3.0.0,special_id:4B520000}\n"
2694 "{product_name:RE200,product_ver:3.0.0,special_id:52550000}\n"
2695 "{product_name:RE200,product_ver:3.0.0,special_id:54570000}\n"
2696 "{product_name:RE200,product_ver:3.0.0,special_id:55530000}\n",
2698 .soft_ver
= SOFT_VER_DEFAULT
,
2701 {"fs-uboot", 0x00000, 0x20000},
2702 {"firmware", 0x20000, 0x7a0000},
2703 {"partition-table", 0x7c0000, 0x02000},
2704 {"default-mac", 0x7c2000, 0x00020},
2705 {"pin", 0x7c2100, 0x00020},
2706 {"product-info", 0x7c3100, 0x01000},
2707 {"soft-version", 0x7c4200, 0x01000},
2708 {"support-list", 0x7c5200, 0x01000},
2709 {"profile", 0x7c6200, 0x08000},
2710 {"config-info", 0x7ce200, 0x00400},
2711 {"user-config", 0x7d0000, 0x10000},
2712 {"default-config", 0x7e0000, 0x10000},
2713 {"radio", 0x7f0000, 0x10000},
2717 .first_sysupgrade_partition
= "os-image",
2718 .last_sysupgrade_partition
= "file-system"
2721 /** Firmware layout for the RE200 v4 */
2727 "{product_name:RE200,product_ver:4.0.0,special_id:00000000}\n"
2728 "{product_name:RE200,product_ver:4.0.0,special_id:45550000}\n"
2729 "{product_name:RE200,product_ver:4.0.0,special_id:4A500000}\n"
2730 "{product_name:RE200,product_ver:4.0.0,special_id:4B520000}\n"
2731 "{product_name:RE200,product_ver:4.0.0,special_id:43410000}\n"
2732 "{product_name:RE200,product_ver:4.0.0,special_id:41550000}\n"
2733 "{product_name:RE200,product_ver:4.0.0,special_id:42520000}\n"
2734 "{product_name:RE200,product_ver:4.0.0,special_id:55530000}\n"
2735 "{product_name:RE200,product_ver:4.0.0,special_id:41520000}\n"
2736 "{product_name:RE200,product_ver:4.0.0,special_id:52550000}\n"
2737 "{product_name:RE200,product_ver:4.0.0,special_id:54570000}\n"
2738 "{product_name:RE200,product_ver:4.0.0,special_id:45530000}\n"
2739 "{product_name:RE200,product_ver:4.0.0,special_id:49440000}\n"
2740 "{product_name:RE200,product_ver:4.0.0,special_id:45470000}\n",
2742 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.1.0\n"),
2745 {"fs-uboot", 0x00000, 0x20000},
2746 {"firmware", 0x20000, 0x7a0000},
2747 {"partition-table", 0x7c0000, 0x02000},
2748 {"default-mac", 0x7c2000, 0x00020},
2749 {"pin", 0x7c2100, 0x00020},
2750 {"product-info", 0x7c3100, 0x01000},
2751 {"soft-version", 0x7c4200, 0x01000},
2752 {"support-list", 0x7c5200, 0x01000},
2753 {"profile", 0x7c6200, 0x08000},
2754 {"config-info", 0x7ce200, 0x00400},
2755 {"user-config", 0x7d0000, 0x10000},
2756 {"default-config", 0x7e0000, 0x10000},
2757 {"radio", 0x7f0000, 0x10000},
2761 .first_sysupgrade_partition
= "os-image",
2762 .last_sysupgrade_partition
= "file-system"
2765 /** Firmware layout for the RE205 v3 */
2771 "{product_name:RE205,product_ver:3.0.0,special_id:00000000}\n"
2772 "{product_name:RE205,product_ver:3.0.0,special_id:45550000}\n"
2773 "{product_name:RE205,product_ver:3.0.0,special_id:4A500000}\n"
2774 "{product_name:RE205,product_ver:3.0.0,special_id:4B520000}\n"
2775 "{product_name:RE205,product_ver:3.0.0,special_id:43410000}\n"
2776 "{product_name:RE205,product_ver:3.0.0,special_id:41550000}\n"
2777 "{product_name:RE205,product_ver:3.0.0,special_id:42520000}\n"
2778 "{product_name:RE205,product_ver:3.0.0,special_id:55530000}\n"
2779 "{product_name:RE205,product_ver:3.0.0,special_id:41520000}\n"
2780 "{product_name:RE205,product_ver:3.0.0,special_id:52550000}\n"
2781 "{product_name:RE205,product_ver:3.0.0,special_id:54570000}\n"
2782 "{product_name:RE205,product_ver:3.0.0,special_id:45530000}\n"
2783 "{product_name:RE205,product_ver:3.0.0,special_id:45470000}\n",
2785 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.1.0\n"),
2788 {"fs-uboot", 0x00000, 0x20000},
2789 {"firmware", 0x20000, 0x7a0000},
2790 {"partition-table", 0x7c0000, 0x02000},
2791 {"default-mac", 0x7c2000, 0x00020},
2792 {"pin", 0x7c2100, 0x00020},
2793 {"product-info", 0x7c3100, 0x01000},
2794 {"soft-version", 0x7c4200, 0x01000},
2795 {"support-list", 0x7c5200, 0x01000},
2796 {"profile", 0x7c6200, 0x08000},
2797 {"config-info", 0x7ce200, 0x00400},
2798 {"user-config", 0x7d0000, 0x10000},
2799 {"default-config", 0x7e0000, 0x10000},
2800 {"radio", 0x7f0000, 0x10000},
2804 .first_sysupgrade_partition
= "os-image",
2805 .last_sysupgrade_partition
= "file-system"
2808 /** Firmware layout for the RE220 v2 */
2814 "{product_name:RE220,product_ver:2.0.0,special_id:00000000}\n"
2815 "{product_name:RE220,product_ver:2.0.0,special_id:41520000}\n"
2816 "{product_name:RE220,product_ver:2.0.0,special_id:41550000}\n"
2817 "{product_name:RE220,product_ver:2.0.0,special_id:42520000}\n"
2818 "{product_name:RE220,product_ver:2.0.0,special_id:43410000}\n"
2819 "{product_name:RE220,product_ver:2.0.0,special_id:45530000}\n"
2820 "{product_name:RE220,product_ver:2.0.0,special_id:45550000}\n"
2821 "{product_name:RE220,product_ver:2.0.0,special_id:49440000}\n"
2822 "{product_name:RE220,product_ver:2.0.0,special_id:4a500000}\n"
2823 "{product_name:RE220,product_ver:2.0.0,special_id:4b520000}\n"
2824 "{product_name:RE220,product_ver:2.0.0,special_id:52550000}\n"
2825 "{product_name:RE220,product_ver:2.0.0,special_id:54570000}\n"
2826 "{product_name:RE220,product_ver:2.0.0,special_id:55530000}\n",
2828 .soft_ver
= SOFT_VER_DEFAULT
,
2831 {"fs-uboot", 0x00000, 0x20000},
2832 {"firmware", 0x20000, 0x7a0000},
2833 {"partition-table", 0x7c0000, 0x02000},
2834 {"default-mac", 0x7c2000, 0x00020},
2835 {"pin", 0x7c2100, 0x00020},
2836 {"product-info", 0x7c3100, 0x01000},
2837 {"soft-version", 0x7c4200, 0x01000},
2838 {"support-list", 0x7c5200, 0x01000},
2839 {"profile", 0x7c6200, 0x08000},
2840 {"config-info", 0x7ce200, 0x00400},
2841 {"user-config", 0x7d0000, 0x10000},
2842 {"default-config", 0x7e0000, 0x10000},
2843 {"radio", 0x7f0000, 0x10000},
2847 .first_sysupgrade_partition
= "os-image",
2848 .last_sysupgrade_partition
= "file-system"
2851 /** Firmware layout for the RE305 v1 */
2857 "{product_name:RE305,product_ver:1.0.0,special_id:45550000}\n"
2858 "{product_name:RE305,product_ver:1.0.0,special_id:55530000}\n"
2859 "{product_name:RE305,product_ver:1.0.0,special_id:4a500000}\n"
2860 "{product_name:RE305,product_ver:1.0.0,special_id:42520000}\n"
2861 "{product_name:RE305,product_ver:1.0.0,special_id:4b520000}\n"
2862 "{product_name:RE305,product_ver:1.0.0,special_id:41550000}\n"
2863 "{product_name:RE305,product_ver:1.0.0,special_id:43410000}\n",
2865 .soft_ver
= SOFT_VER_DEFAULT
,
2868 {"fs-uboot", 0x00000, 0x20000},
2869 {"firmware", 0x20000, 0x5e0000},
2870 {"partition-table", 0x600000, 0x02000},
2871 {"default-mac", 0x610000, 0x00020},
2872 {"pin", 0x610100, 0x00020},
2873 {"product-info", 0x611100, 0x01000},
2874 {"soft-version", 0x620000, 0x01000},
2875 {"support-list", 0x621000, 0x01000},
2876 {"profile", 0x622000, 0x08000},
2877 {"user-config", 0x630000, 0x10000},
2878 {"default-config", 0x640000, 0x10000},
2879 {"radio", 0x7f0000, 0x10000},
2883 .first_sysupgrade_partition
= "os-image",
2884 .last_sysupgrade_partition
= "file-system"
2887 /** Firmware layout for the RE305 v3 */
2893 "{product_name:RE305,product_ver:3.0.0,special_id:00000000}\n"
2894 "{product_name:RE305,product_ver:3.0.0,special_id:45550000}\n"
2895 "{product_name:RE305,product_ver:3.0.0,special_id:4A500000}\n"
2896 "{product_name:RE305,product_ver:3.0.0,special_id:4B520000}\n"
2897 "{product_name:RE305,product_ver:3.0.0,special_id:41550000}\n"
2898 "{product_name:RE305,product_ver:3.0.0,special_id:42520000}\n"
2899 "{product_name:RE305,product_ver:3.0.0,special_id:55530000}\n"
2900 "{product_name:RE305,product_ver:3.0.0,special_id:45530000}\n"
2901 "{product_name:RE305,product_ver:3.0.0,special_id:41530000}\n"
2902 "{product_name:RE305,product_ver:3.0.0,special_id:43410000}\n"
2903 "{product_name:RE305,product_ver:3.0.0,special_id:52550000}\n",
2905 .soft_ver
= SOFT_VER_TEXT("soft_ver:2.0.0\n"),
2908 {"fs-uboot", 0x00000, 0x20000},
2909 {"firmware", 0x20000, 0x7a0000},
2910 {"partition-table", 0x7c0000, 0x02000},
2911 {"default-mac", 0x7c2000, 0x00020},
2912 {"pin", 0x7c2100, 0x00020},
2913 {"product-info", 0x7c3100, 0x01000},
2914 {"soft-version", 0x7c4200, 0x01000},
2915 {"support-list", 0x7c5200, 0x01000},
2916 {"profile", 0x7c6200, 0x08000},
2917 {"config-info", 0x7ce200, 0x00400},
2918 {"user-config", 0x7d0000, 0x10000},
2919 {"default-config", 0x7e0000, 0x10000},
2920 {"radio", 0x7f0000, 0x10000},
2924 .first_sysupgrade_partition
= "os-image",
2925 .last_sysupgrade_partition
= "file-system"
2928 /** Firmware layout for the RE350 v1 */
2934 "{product_name:RE350,product_ver:1.0.0,special_id:45550000}\n"
2935 "{product_name:RE350,product_ver:1.0.0,special_id:00000000}\n"
2936 "{product_name:RE350,product_ver:1.0.0,special_id:41550000}\n"
2937 "{product_name:RE350,product_ver:1.0.0,special_id:55530000}\n"
2938 "{product_name:RE350,product_ver:1.0.0,special_id:43410000}\n"
2939 "{product_name:RE350,product_ver:1.0.0,special_id:4b520000}\n"
2940 "{product_name:RE350,product_ver:1.0.0,special_id:4a500000}\n",
2942 .soft_ver
= SOFT_VER_DEFAULT
,
2944 /** We're using a dynamic kernel/rootfs split here */
2946 {"fs-uboot", 0x00000, 0x20000},
2947 {"firmware", 0x20000, 0x5e0000},
2948 {"partition-table", 0x600000, 0x02000},
2949 {"default-mac", 0x610000, 0x00020},
2950 {"pin", 0x610100, 0x00020},
2951 {"product-info", 0x611100, 0x01000},
2952 {"soft-version", 0x620000, 0x01000},
2953 {"support-list", 0x621000, 0x01000},
2954 {"profile", 0x622000, 0x08000},
2955 {"user-config", 0x630000, 0x10000},
2956 {"default-config", 0x640000, 0x10000},
2957 {"radio", 0x7f0000, 0x10000},
2961 .first_sysupgrade_partition
= "os-image",
2962 .last_sysupgrade_partition
= "file-system"
2965 /** Firmware layout for the RE350K v1 */
2971 "{product_name:RE350K,product_ver:1.0.0,special_id:00000000,product_region:US}\n",
2973 .soft_ver
= SOFT_VER_DEFAULT
,
2975 /** We're using a dynamic kernel/rootfs split here */
2977 {"fs-uboot", 0x00000, 0x20000},
2978 {"firmware", 0x20000, 0xd70000},
2979 {"partition-table", 0xd90000, 0x02000},
2980 {"default-mac", 0xda0000, 0x00020},
2981 {"pin", 0xda0100, 0x00020},
2982 {"product-info", 0xda1100, 0x01000},
2983 {"soft-version", 0xdb0000, 0x01000},
2984 {"support-list", 0xdb1000, 0x01000},
2985 {"profile", 0xdb2000, 0x08000},
2986 {"user-config", 0xdc0000, 0x10000},
2987 {"default-config", 0xdd0000, 0x10000},
2988 {"device-id", 0xde0000, 0x00108},
2989 {"radio", 0xff0000, 0x10000},
2993 .first_sysupgrade_partition
= "os-image",
2994 .last_sysupgrade_partition
= "file-system"
2997 /** Firmware layout for the RE355 */
3003 "{product_name:RE355,product_ver:1.0.0,special_id:00000000}\r\n"
3004 "{product_name:RE355,product_ver:1.0.0,special_id:55530000}\r\n"
3005 "{product_name:RE355,product_ver:1.0.0,special_id:45550000}\r\n"
3006 "{product_name:RE355,product_ver:1.0.0,special_id:4A500000}\r\n"
3007 "{product_name:RE355,product_ver:1.0.0,special_id:43410000}\r\n"
3008 "{product_name:RE355,product_ver:1.0.0,special_id:41550000}\r\n"
3009 "{product_name:RE355,product_ver:1.0.0,special_id:4B520000}\r\n"
3010 "{product_name:RE355,product_ver:1.0.0,special_id:55534100}\r\n",
3012 .soft_ver
= SOFT_VER_DEFAULT
,
3014 /* We're using a dynamic kernel/rootfs split here */
3016 {"fs-uboot", 0x00000, 0x20000},
3017 {"firmware", 0x20000, 0x5e0000},
3018 {"partition-table", 0x600000, 0x02000},
3019 {"default-mac", 0x610000, 0x00020},
3020 {"pin", 0x610100, 0x00020},
3021 {"product-info", 0x611100, 0x01000},
3022 {"soft-version", 0x620000, 0x01000},
3023 {"support-list", 0x621000, 0x01000},
3024 {"profile", 0x622000, 0x08000},
3025 {"user-config", 0x630000, 0x10000},
3026 {"default-config", 0x640000, 0x10000},
3027 {"radio", 0x7f0000, 0x10000},
3031 .first_sysupgrade_partition
= "os-image",
3032 .last_sysupgrade_partition
= "file-system"
3035 /** Firmware layout for the RE365 v1 */
3041 "{product_name:RE365,product_ver:1.0.0,special_id:45550000}\r\n"
3042 "{product_name:RE365,product_ver:1.0.0,special_id:55530000}\r\n"
3043 "{product_name:RE365,product_ver:1.0.0,special_id:4a500000}\r\n"
3044 "{product_name:RE365,product_ver:1.0.0,special_id:42520000}\r\n"
3045 "{product_name:RE365,product_ver:1.0.0,special_id:4b520000}\r\n"
3046 "{product_name:RE365,product_ver:1.0.0,special_id:41550000}\r\n"
3047 "{product_name:RE365,product_ver:1.0.0,special_id:43410000}\r\n"
3048 "{product_name:RE365,product_ver:1.0.0,special_id:54570000}\r\n"
3049 "{product_name:RE365,product_ver:1.0.0,special_id:41530000}\r\n",
3051 .soft_ver
= SOFT_VER_DEFAULT
,
3054 {"fs-uboot", 0x00000, 0x20000},
3055 {"firmware", 0x20000, 0x5e0000},
3056 {"partition-table", 0x600000, 0x02000},
3057 {"default-mac", 0x610000, 0x00020},
3058 {"pin", 0x610100, 0x00020},
3059 {"product-info", 0x611100, 0x01000},
3060 {"soft-version", 0x620000, 0x01000},
3061 {"support-list", 0x621000, 0x01000},
3062 {"profile", 0x622000, 0x08000},
3063 {"user-config", 0x630000, 0x10000},
3064 {"default-config", 0x640000, 0x10000},
3065 {"radio", 0x7f0000, 0x10000},
3069 .first_sysupgrade_partition
= "os-image",
3070 .last_sysupgrade_partition
= "file-system"
3073 /** Firmware layout for the RE450 */
3079 "{product_name:RE450,product_ver:1.0.0,special_id:00000000}\r\n"
3080 "{product_name:RE450,product_ver:1.0.0,special_id:55530000}\r\n"
3081 "{product_name:RE450,product_ver:1.0.0,special_id:45550000}\r\n"
3082 "{product_name:RE450,product_ver:1.0.0,special_id:4A500000}\r\n"
3083 "{product_name:RE450,product_ver:1.0.0,special_id:43410000}\r\n"
3084 "{product_name:RE450,product_ver:1.0.0,special_id:41550000}\r\n"
3085 "{product_name:RE450,product_ver:1.0.0,special_id:4B520000}\r\n"
3086 "{product_name:RE450,product_ver:1.0.0,special_id:55534100}\r\n",
3088 .soft_ver
= SOFT_VER_DEFAULT
,
3090 /** We're using a dynamic kernel/rootfs split here */
3092 {"fs-uboot", 0x00000, 0x20000},
3093 {"firmware", 0x20000, 0x5e0000},
3094 {"partition-table", 0x600000, 0x02000},
3095 {"default-mac", 0x610000, 0x00020},
3096 {"pin", 0x610100, 0x00020},
3097 {"product-info", 0x611100, 0x01000},
3098 {"soft-version", 0x620000, 0x01000},
3099 {"support-list", 0x621000, 0x01000},
3100 {"profile", 0x622000, 0x08000},
3101 {"user-config", 0x630000, 0x10000},
3102 {"default-config", 0x640000, 0x10000},
3103 {"radio", 0x7f0000, 0x10000},
3107 .first_sysupgrade_partition
= "os-image",
3108 .last_sysupgrade_partition
= "file-system"
3111 /** Firmware layout for the RE450 v2 */
3117 "{product_name:RE450,product_ver:2.0.0,special_id:00000000}\r\n"
3118 "{product_name:RE450,product_ver:2.0.0,special_id:55530000}\r\n"
3119 "{product_name:RE450,product_ver:2.0.0,special_id:45550000}\r\n"
3120 "{product_name:RE450,product_ver:2.0.0,special_id:4A500000}\r\n"
3121 "{product_name:RE450,product_ver:2.0.0,special_id:43410000}\r\n"
3122 "{product_name:RE450,product_ver:2.0.0,special_id:41550000}\r\n"
3123 "{product_name:RE450,product_ver:2.0.0,special_id:41530000}\r\n"
3124 "{product_name:RE450,product_ver:2.0.0,special_id:4B520000}\r\n"
3125 "{product_name:RE450,product_ver:2.0.0,special_id:42520000}\r\n",
3127 .soft_ver
= SOFT_VER_DEFAULT
,
3129 /* We're using a dynamic kernel/rootfs split here */
3131 {"fs-uboot", 0x00000, 0x20000},
3132 {"firmware", 0x20000, 0x5e0000},
3133 {"partition-table", 0x600000, 0x02000},
3134 {"default-mac", 0x610000, 0x00020},
3135 {"pin", 0x610100, 0x00020},
3136 {"product-info", 0x611100, 0x01000},
3137 {"soft-version", 0x620000, 0x01000},
3138 {"support-list", 0x621000, 0x01000},
3139 {"profile", 0x622000, 0x08000},
3140 {"user-config", 0x630000, 0x10000},
3141 {"default-config", 0x640000, 0x10000},
3142 {"radio", 0x7f0000, 0x10000},
3146 .first_sysupgrade_partition
= "os-image",
3147 .last_sysupgrade_partition
= "file-system"
3150 /** Firmware layout for the RE450 v3 */
3156 "{product_name:RE450,product_ver:3.0.0,special_id:00000000}\r\n"
3157 "{product_name:RE450,product_ver:3.0.0,special_id:55530000}\r\n"
3158 "{product_name:RE450,product_ver:3.0.0,special_id:45550000}\r\n"
3159 "{product_name:RE450,product_ver:3.0.0,special_id:4A500000}\r\n"
3160 "{product_name:RE450,product_ver:3.0.0,special_id:43410000}\r\n"
3161 "{product_name:RE450,product_ver:3.0.0,special_id:41550000}\r\n"
3162 "{product_name:RE450,product_ver:3.0.0,special_id:41530000}\r\n"
3163 "{product_name:RE450,product_ver:3.0.0,special_id:4B520000}\r\n"
3164 "{product_name:RE450,product_ver:3.0.0,special_id:42520000}\r\n",
3166 .soft_ver
= SOFT_VER_DEFAULT
,
3168 /* We're using a dynamic kernel/rootfs split here */
3170 {"fs-uboot", 0x00000, 0x20000},
3171 {"default-mac", 0x20000, 0x00020},
3172 {"pin", 0x20020, 0x00020},
3173 {"product-info", 0x21000, 0x01000},
3174 {"partition-table", 0x22000, 0x02000},
3175 {"soft-version", 0x24000, 0x01000},
3176 {"support-list", 0x25000, 0x01000},
3177 {"profile", 0x26000, 0x08000},
3178 {"user-config", 0x2e000, 0x10000},
3179 {"default-config", 0x3e000, 0x10000},
3180 {"config-info", 0x4e000, 0x00400},
3181 {"firmware", 0x50000, 0x7a0000},
3182 {"radio", 0x7f0000, 0x10000},
3186 .first_sysupgrade_partition
= "os-image",
3187 .last_sysupgrade_partition
= "file-system"
3190 /** Firmware layout for the RE455 v1 */
3196 "{product_name:RE455,product_ver:1.0.0,special_id:00000000}\r\n"
3197 "{product_name:RE455,product_ver:1.0.0,special_id:55530000}\r\n"
3198 "{product_name:RE455,product_ver:1.0.0,special_id:45550000}\r\n"
3199 "{product_name:RE455,product_ver:1.0.0,special_id:4A500000}\r\n"
3200 "{product_name:RE455,product_ver:1.0.0,special_id:43410000}\r\n"
3201 "{product_name:RE455,product_ver:1.0.0,special_id:41550000}\r\n"
3202 "{product_name:RE455,product_ver:1.0.0,special_id:41530000}\r\n"
3203 "{product_name:RE455,product_ver:1.0.0,special_id:4B520000}\r\n"
3204 "{product_name:RE455,product_ver:1.0.0,special_id:42520000}\r\n",
3206 .soft_ver
= SOFT_VER_DEFAULT
,
3208 /* We're using a dynamic kernel/rootfs split here */
3210 {"fs-uboot", 0x00000, 0x20000},
3211 {"default-mac", 0x20000, 0x00020},
3212 {"pin", 0x20020, 0x00020},
3213 {"product-info", 0x21000, 0x01000},
3214 {"partition-table", 0x22000, 0x02000},
3215 {"soft-version", 0x24000, 0x01000},
3216 {"support-list", 0x25000, 0x01000},
3217 {"profile", 0x26000, 0x08000},
3218 {"user-config", 0x2e000, 0x10000},
3219 {"default-config", 0x3e000, 0x10000},
3220 {"config-info", 0x4e000, 0x00400},
3221 {"firmware", 0x50000, 0x7a0000},
3222 {"radio", 0x7f0000, 0x10000},
3226 .first_sysupgrade_partition
= "os-image",
3227 .last_sysupgrade_partition
= "file-system"
3230 /** Firmware layout for the RE500 */
3236 "{product_name:RE500,product_ver:1.0.0,special_id:00000000}\r\n"
3237 "{product_name:RE500,product_ver:1.0.0,special_id:55530000}\r\n"
3238 "{product_name:RE500,product_ver:1.0.0,special_id:45550000}\r\n"
3239 "{product_name:RE500,product_ver:1.0.0,special_id:4A500000}\r\n"
3240 "{product_name:RE500,product_ver:1.0.0,special_id:43410000}\r\n"
3241 "{product_name:RE500,product_ver:1.0.0,special_id:41550000}\r\n"
3242 "{product_name:RE500,product_ver:1.0.0,special_id:41530000}\r\n",
3244 .soft_ver
= SOFT_VER_DEFAULT
,
3246 /* We're using a dynamic kernel/rootfs split here */
3248 {"fs-uboot", 0x00000, 0x20000},
3249 {"firmware", 0x20000, 0xde0000},
3250 {"partition-table", 0xe00000, 0x02000},
3251 {"default-mac", 0xe10000, 0x00020},
3252 {"pin", 0xe10100, 0x00020},
3253 {"product-info", 0xe11100, 0x01000},
3254 {"soft-version", 0xe20000, 0x01000},
3255 {"support-list", 0xe21000, 0x01000},
3256 {"profile", 0xe22000, 0x08000},
3257 {"user-config", 0xe30000, 0x10000},
3258 {"default-config", 0xe40000, 0x10000},
3259 {"radio", 0xff0000, 0x10000},
3263 .first_sysupgrade_partition
= "os-image",
3264 .last_sysupgrade_partition
= "file-system"
3267 /** Firmware layout for the RE650 */
3273 "{product_name:RE650,product_ver:1.0.0,special_id:00000000}\r\n"
3274 "{product_name:RE650,product_ver:1.0.0,special_id:55530000}\r\n"
3275 "{product_name:RE650,product_ver:1.0.0,special_id:45550000}\r\n"
3276 "{product_name:RE650,product_ver:1.0.0,special_id:4A500000}\r\n"
3277 "{product_name:RE650,product_ver:1.0.0,special_id:43410000}\r\n"
3278 "{product_name:RE650,product_ver:1.0.0,special_id:41550000}\r\n"
3279 "{product_name:RE650,product_ver:1.0.0,special_id:41530000}\r\n",
3281 .soft_ver
= SOFT_VER_DEFAULT
,
3283 /* We're using a dynamic kernel/rootfs split here */
3285 {"fs-uboot", 0x00000, 0x20000},
3286 {"firmware", 0x20000, 0xde0000},
3287 {"partition-table", 0xe00000, 0x02000},
3288 {"default-mac", 0xe10000, 0x00020},
3289 {"pin", 0xe10100, 0x00020},
3290 {"product-info", 0xe11100, 0x01000},
3291 {"soft-version", 0xe20000, 0x01000},
3292 {"support-list", 0xe21000, 0x01000},
3293 {"profile", 0xe22000, 0x08000},
3294 {"user-config", 0xe30000, 0x10000},
3295 {"default-config", 0xe40000, 0x10000},
3296 {"radio", 0xff0000, 0x10000},
3300 .first_sysupgrade_partition
= "os-image",
3301 .last_sysupgrade_partition
= "file-system"
3303 /** Firmware layout for the RE650 V2 (8MB Flash)*/
3309 "{product_name:RE650,product_ver:2.0.0,special_id:00000000}\n"
3310 "{product_name:RE650,product_ver:2.0.0,special_id:45550000}\n"
3311 "{product_name:RE650,product_ver:2.0.0,special_id:4A500000}\n"
3312 "{product_name:RE650,product_ver:2.0.0,special_id:41550000}\n"
3313 "{product_name:RE650,product_ver:2.0.0,special_id:43410000}\n"
3314 "{product_name:RE650,product_ver:2.0.0,special_id:41530000}\n"
3315 "{product_name:RE650,product_ver:2.0.0,special_id:55530000}\n",
3317 /* For RE650 v2, soft ver is required, otherwise OEM install doesn't work */
3318 .soft_ver
= SOFT_VER_TEXT("soft_ver:2.0.0\n"),
3320 /* We're using a dynamic kernel/rootfs split here */
3322 {"fs-uboot", 0x00000, 0x20000},
3323 {"firmware", 0x20000, 0x7a0000},
3324 {"partition-table", 0x7c0000, 0x02000},
3325 {"default-mac", 0x7c2000, 0x00020},
3326 {"pin", 0x7c2100, 0x00020},
3327 {"product-info", 0x7c3100, 0x01000},
3328 {"soft-version", 0x7c4200, 0x01000},
3329 {"support-list", 0x7c5200, 0x01000},
3330 {"profile", 0x7c6200, 0x08000},
3331 {"config-info", 0x7ce200, 0x00400},
3332 {"user-config", 0x7d0000, 0x10000},
3333 {"default-config", 0x7e0000, 0x10000},
3334 {"radio", 0x7f0000, 0x10000},
3338 .first_sysupgrade_partition
= "os-image",
3339 .last_sysupgrade_partition
= "file-system"
3342 /** Firmware layout for the Mercusys MR70X */
3348 "{product_name:MR70X,product_ver:1.0.0,special_id:45550000}\n"
3349 "{product_name:MR70X,product_ver:1.0.0,special_id:4A500000}\n"
3350 "{product_name:MR70X,product_ver:1.0.0,special_id:55530000}\n",
3352 .soft_ver
= SOFT_VER_DEFAULT
,
3355 {"fs-uboot", 0x00000, 0x40000},
3356 {"firmware", 0x40000, 0xf60000},
3357 {"default-mac", 0xfa0000, 0x00200},
3358 {"pin", 0xfa0200, 0x00100},
3359 {"device-id", 0xfa0300, 0x00100},
3360 {"product-info", 0xfa0400, 0x0fc00},
3361 {"default-config", 0xfb0000, 0x08000},
3362 {"ap-def-config", 0xfb8000, 0x08000},
3363 {"user-config", 0xfc0000, 0x0a000},
3364 {"ag-config", 0xfca000, 0x04000},
3365 {"certificate", 0xfce000, 0x02000},
3366 {"ap-config", 0xfd0000, 0x06000},
3367 {"router-config", 0xfd6000, 0x06000},
3368 {"favicon", 0xfdc000, 0x02000},
3369 {"logo", 0xfde000, 0x02000},
3370 {"partition-table", 0xfe0000, 0x00800},
3371 {"soft-version", 0xfe0800, 0x00100},
3372 {"support-list", 0xfe0900, 0x00200},
3373 {"profile", 0xfe0b00, 0x03000},
3374 {"extra-para", 0xfe3b00, 0x00100},
3375 {"radio", 0xff0000, 0x10000},
3379 .first_sysupgrade_partition
= "os-image",
3380 .last_sysupgrade_partition
= "file-system"
3386 #define error(_ret, _errno, _str, ...) \
3388 fprintf(stderr, _str ": %s\n", ## __VA_ARGS__, \
3389 strerror(_errno)); \
3395 /** Stores a uint32 as big endian */
3396 static inline void put32(uint8_t *buf
, uint32_t val
) {
3403 static inline bool meta_partition_should_pad(enum partition_trail_value pv
)
3405 return (pv
>= 0) && (pv
<= PART_TRAIL_MAX
);
3408 /** Allocate a padded meta partition with a correctly initialised header
3409 * If the `data` pointer is NULL, then the required space is only allocated,
3410 * otherwise `data_len` bytes will be copied from `data` into the partition
3412 static struct image_partition_entry
init_meta_partition_entry(
3413 const char *name
, const void *data
, uint32_t data_len
,
3414 enum partition_trail_value pad_value
)
3416 uint32_t total_len
= sizeof(struct meta_header
) + data_len
;
3417 if (meta_partition_should_pad(pad_value
))
3420 struct image_partition_entry entry
= {
3423 .data
= malloc(total_len
)
3426 error(1, errno
, "failed to allocate meta partition entry");
3428 struct meta_header
*header
= (struct meta_header
*)entry
.data
;
3429 header
->length
= htonl(data_len
);
3433 memcpy(entry
.data
+sizeof(*header
), data
, data_len
);
3435 if (meta_partition_should_pad(pad_value
))
3436 entry
.data
[total_len
- 1] = (uint8_t) pad_value
;
3441 /** Allocates a new image partition */
3442 static struct image_partition_entry
alloc_image_partition(const char *name
, size_t len
) {
3443 struct image_partition_entry entry
= {name
, len
, malloc(len
)};
3445 error(1, errno
, "malloc");
3450 /** Sets up default partition names whenever custom names aren't specified */
3451 static void set_partition_names(struct device_info
*info
)
3453 if (!info
->partition_names
.partition_table
)
3454 info
->partition_names
.partition_table
= "partition-table";
3455 if (!info
->partition_names
.soft_ver
)
3456 info
->partition_names
.soft_ver
= "soft-version";
3457 if (!info
->partition_names
.os_image
)
3458 info
->partition_names
.os_image
= "os-image";
3459 if (!info
->partition_names
.support_list
)
3460 info
->partition_names
.support_list
= "support-list";
3461 if (!info
->partition_names
.file_system
)
3462 info
->partition_names
.file_system
= "file-system";
3463 if (!info
->partition_names
.extra_para
)
3464 info
->partition_names
.extra_para
= "extra-para";
3467 /** Frees an image partition */
3468 static void free_image_partition(struct image_partition_entry
*entry
)
3470 void *data
= entry
->data
;
3479 static time_t source_date_epoch
= -1;
3480 static void set_source_date_epoch() {
3481 char *env
= getenv("SOURCE_DATE_EPOCH");
3485 source_date_epoch
= strtoull(env
, &endptr
, 10);
3486 if (errno
|| (endptr
&& *endptr
!= '\0')) {
3487 fprintf(stderr
, "Invalid SOURCE_DATE_EPOCH");
3493 /** Generates the partition-table partition */
3494 static struct image_partition_entry
make_partition_table(const struct device_info
*p
)
3496 struct image_partition_entry entry
= alloc_image_partition(p
->partition_names
.partition_table
, SAFELOADER_PAYLOAD_TABLE_SIZE
);
3498 char *s
= (char *)entry
.data
, *end
= (char *)(s
+entry
.size
);
3506 for (i
= 0; p
->partitions
[i
].name
; i
++) {
3508 size_t w
= snprintf(s
, len
, "partition %s base 0x%05x size 0x%05x\n",
3509 p
->partitions
[i
].name
, p
->partitions
[i
].base
, p
->partitions
[i
].size
);
3512 error(1, 0, "flash partition table overflow?");
3519 memset(s
, 0xff, end
-s
);
3525 /** Generates a binary-coded decimal representation of an integer in the range [0, 99] */
3526 static inline uint8_t bcd(uint8_t v
) {
3527 return 0x10 * (v
/10) + v
%10;
3531 /** Generates the soft-version partition */
3532 static struct image_partition_entry
make_soft_version(const struct device_info
*info
, uint32_t rev
)
3534 /** If an info string is provided, use this instead of
3535 * the structured data, and include the null-termination */
3536 if (info
->soft_ver
.type
== SOFT_VER_TYPE_TEXT
) {
3537 uint32_t len
= strlen(info
->soft_ver
.text
) + 1;
3538 return init_meta_partition_entry(info
->partition_names
.soft_ver
,
3539 info
->soft_ver
.text
, len
, info
->part_trail
);
3544 if (source_date_epoch
!= -1)
3545 t
= source_date_epoch
;
3546 else if (time(&t
) == (time_t)(-1))
3547 error(1, errno
, "time");
3549 struct tm
*tm
= gmtime(&t
);
3551 struct soft_version s
= {
3554 .version_major
= info
->soft_ver
.num
[0],
3555 .version_minor
= info
->soft_ver
.num
[1],
3556 .version_patch
= info
->soft_ver
.num
[2],
3558 .year_hi
= bcd((1900+tm
->tm_year
)/100),
3559 .year_lo
= bcd(tm
->tm_year
%100),
3560 .month
= bcd(tm
->tm_mon
+1),
3561 .day
= bcd(tm
->tm_mday
),
3564 .compat_level
= htonl(info
->soft_ver_compat_level
)
3567 if (info
->soft_ver_compat_level
== 0)
3568 return init_meta_partition_entry(info
->partition_names
.soft_ver
, &s
,
3569 (uint8_t *)(&s
.compat_level
) - (uint8_t *)(&s
),
3572 return init_meta_partition_entry(info
->partition_names
.soft_ver
, &s
,
3573 sizeof(s
), info
->part_trail
);
3576 /** Generates the support-list partition */
3577 static struct image_partition_entry
make_support_list(
3578 const struct device_info
*info
)
3580 uint32_t len
= strlen(info
->support_list
);
3581 return init_meta_partition_entry(info
->partition_names
.support_list
, info
->support_list
,
3582 len
, info
->part_trail
);
3585 /** Partition with extra-para data */
3586 static struct image_partition_entry
make_extra_para(
3587 const struct device_info
*info
, const uint8_t *extra_para
, size_t len
)
3589 return init_meta_partition_entry(info
->partition_names
.extra_para
, extra_para
, len
,
3593 /** Creates a new image partition with an arbitrary name from a file */
3594 static struct image_partition_entry
read_file(const char *part_name
, const char *filename
, bool add_jffs2_eof
, struct flash_partition_entry
*file_system_partition
) {
3595 struct stat statbuf
;
3597 if (stat(filename
, &statbuf
) < 0)
3598 error(1, errno
, "unable to stat file `%s'", filename
);
3600 size_t len
= statbuf
.st_size
;
3602 if (add_jffs2_eof
) {
3603 if (file_system_partition
)
3604 len
= ALIGN(len
+ file_system_partition
->base
, 0x10000) + sizeof(jffs2_eof_mark
) - file_system_partition
->base
;
3606 len
= ALIGN(len
, 0x10000) + sizeof(jffs2_eof_mark
);
3609 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
3611 FILE *file
= fopen(filename
, "rb");
3613 error(1, errno
, "unable to open file `%s'", filename
);
3615 if (fread(entry
.data
, statbuf
.st_size
, 1, file
) != 1)
3616 error(1, errno
, "unable to read file `%s'", filename
);
3618 if (add_jffs2_eof
) {
3619 uint8_t *eof
= entry
.data
+ statbuf
.st_size
, *end
= entry
.data
+entry
.size
;
3621 memset(eof
, 0xff, end
- eof
- sizeof(jffs2_eof_mark
));
3622 memcpy(end
- sizeof(jffs2_eof_mark
), jffs2_eof_mark
, sizeof(jffs2_eof_mark
));
3631 Copies a list of image partitions into an image buffer and generates the image partition table while doing so
3633 Example image partition table:
3635 fwup-ptn partition-table base 0x00800 size 0x00800
3636 fwup-ptn os-image base 0x01000 size 0x113b45
3637 fwup-ptn file-system base 0x114b45 size 0x1d0004
3638 fwup-ptn support-list base 0x2e4b49 size 0x000d1
3640 Each line of the partition table is terminated with the bytes 09 0d 0a ("\t\r\n"),
3641 the end of the partition table is marked with a zero byte.
3643 The firmware image must contain at least the partition-table and support-list partitions
3644 to be accepted. There aren't any alignment constraints for the image partitions.
3646 The partition-table partition contains the actual flash layout; partitions
3647 from the image partition table are mapped to the corresponding flash partitions during
3648 the firmware upgrade. The support-list partition contains a list of devices supported by
3651 The base offsets in the firmware partition table are relative to the end
3652 of the vendor information block, so the partition-table partition will
3653 actually start at offset 0x1814 of the image.
3655 I think partition-table must be the first partition in the firmware image.
3657 static void put_partitions(uint8_t *buffer
, const struct flash_partition_entry
*flash_parts
, const struct image_partition_entry
*parts
) {
3659 char *image_pt
= (char *)buffer
, *end
= image_pt
+ SAFELOADER_PAYLOAD_TABLE_SIZE
;
3661 size_t base
= SAFELOADER_PAYLOAD_TABLE_SIZE
;
3662 for (i
= 0; parts
[i
].name
; i
++) {
3663 for (j
= 0; flash_parts
[j
].name
; j
++) {
3664 if (!strcmp(flash_parts
[j
].name
, parts
[i
].name
)) {
3665 if (parts
[i
].size
> flash_parts
[j
].size
)
3666 error(1, 0, "%s partition too big (more than %u bytes)", flash_parts
[j
].name
, (unsigned)flash_parts
[j
].size
);
3671 assert(flash_parts
[j
].name
);
3673 memcpy(buffer
+ base
, parts
[i
].data
, parts
[i
].size
);
3675 size_t len
= end
-image_pt
;
3676 size_t w
= snprintf(image_pt
, len
, "fwup-ptn %s base 0x%05x size 0x%05x\t\r\n", parts
[i
].name
, (unsigned)base
, (unsigned)parts
[i
].size
);
3679 error(1, 0, "image partition table overflow?");
3683 base
+= parts
[i
].size
;
3687 /** Generates and writes the image MD5 checksum */
3688 static void put_md5(uint8_t *md5
, uint8_t *buffer
, unsigned int len
) {
3692 MD5_Update(&ctx
, md5_salt
, (unsigned int)sizeof(md5_salt
));
3693 MD5_Update(&ctx
, buffer
, len
);
3694 MD5_Final(md5
, &ctx
);
3699 Generates the firmware image in factory format
3705 0000-0003 Image size (4 bytes, big endian)
3706 0004-0013 MD5 hash (hash of a 16 byte salt and the image data starting with byte 0x14)
3707 0014-0017 Vendor information length (without padding) (4 bytes, big endian)
3708 0018-1013 Vendor information (4092 bytes, padded with 0xff; there seem to be older
3709 (VxWorks-based) TP-LINK devices which use a smaller vendor information block)
3710 1014-1813 Image partition table (2048 bytes, padded with 0xff)
3711 1814-xxxx Firmware partitions
3713 static void * generate_factory_image(struct device_info
*info
, const struct image_partition_entry
*parts
, size_t *len
) {
3714 *len
= SAFELOADER_PAYLOAD_OFFSET
+ SAFELOADER_PAYLOAD_TABLE_SIZE
;
3717 for (i
= 0; parts
[i
].name
; i
++)
3718 *len
+= parts
[i
].size
;
3720 uint8_t *image
= malloc(*len
);
3722 error(1, errno
, "malloc");
3724 memset(image
, 0xff, *len
);
3728 size_t vendor_len
= strlen(info
->vendor
);
3729 put32(image
+ SAFELOADER_PREAMBLE_SIZE
, vendor_len
);
3730 memcpy(image
+ SAFELOADER_PREAMBLE_SIZE
+ 0x4, info
->vendor
, vendor_len
);
3733 put_partitions(image
+ SAFELOADER_PAYLOAD_OFFSET
, info
->partitions
, parts
);
3734 put_md5(image
+ 0x04, image
+ SAFELOADER_PREAMBLE_SIZE
, *len
- SAFELOADER_PREAMBLE_SIZE
);
3740 Generates the firmware image in sysupgrade format
3742 This makes some assumptions about the provided flash and image partition tables and
3743 should be generalized when TP-LINK starts building its safeloader into hardware with
3744 different flash layouts.
3746 static void * generate_sysupgrade_image(struct device_info
*info
, const struct image_partition_entry
*image_parts
, size_t *len
) {
3748 size_t flash_first_partition_index
= 0;
3749 size_t flash_last_partition_index
= 0;
3750 const struct flash_partition_entry
*flash_first_partition
= NULL
;
3751 const struct flash_partition_entry
*flash_last_partition
= NULL
;
3752 const struct image_partition_entry
*image_last_partition
= NULL
;
3754 /** Find first and last partitions */
3755 for (i
= 0; info
->partitions
[i
].name
; i
++) {
3756 if (!strcmp(info
->partitions
[i
].name
, info
->first_sysupgrade_partition
)) {
3757 flash_first_partition
= &info
->partitions
[i
];
3758 flash_first_partition_index
= i
;
3759 } else if (!strcmp(info
->partitions
[i
].name
, info
->last_sysupgrade_partition
)) {
3760 flash_last_partition
= &info
->partitions
[i
];
3761 flash_last_partition_index
= i
;
3765 assert(flash_first_partition
&& flash_last_partition
);
3766 assert(flash_first_partition_index
< flash_last_partition_index
);
3768 /** Find last partition from image to calculate needed size */
3769 for (i
= 0; image_parts
[i
].name
; i
++) {
3770 if (!strcmp(image_parts
[i
].name
, info
->last_sysupgrade_partition
)) {
3771 image_last_partition
= &image_parts
[i
];
3776 assert(image_last_partition
);
3778 *len
= flash_last_partition
->base
- flash_first_partition
->base
+ image_last_partition
->size
;
3780 uint8_t *image
= malloc(*len
);
3782 error(1, errno
, "malloc");
3784 memset(image
, 0xff, *len
);
3786 for (i
= flash_first_partition_index
; i
<= flash_last_partition_index
; i
++) {
3787 for (j
= 0; image_parts
[j
].name
; j
++) {
3788 if (!strcmp(info
->partitions
[i
].name
, image_parts
[j
].name
)) {
3789 if (image_parts
[j
].size
> info
->partitions
[i
].size
)
3790 error(1, 0, "%s partition too big (more than %u bytes)", info
->partitions
[i
].name
, (unsigned)info
->partitions
[i
].size
);
3791 memcpy(image
+ info
->partitions
[i
].base
- flash_first_partition
->base
, image_parts
[j
].data
, image_parts
[j
].size
);
3795 assert(image_parts
[j
].name
);
3802 /** Generates an image according to a given layout and writes it to a file */
3803 static void build_image(const char *output
,
3804 const char *kernel_image
,
3805 const char *rootfs_image
,
3809 struct device_info
*info
) {
3813 struct image_partition_entry parts
[7] = {};
3815 struct flash_partition_entry
*firmware_partition
= NULL
;
3816 struct flash_partition_entry
*os_image_partition
= NULL
;
3817 struct flash_partition_entry
*file_system_partition
= NULL
;
3818 size_t firmware_partition_index
= 0;
3820 set_partition_names(info
);
3822 for (i
= 0; info
->partitions
[i
].name
; i
++) {
3823 if (!strcmp(info
->partitions
[i
].name
, "firmware"))
3825 firmware_partition
= &info
->partitions
[i
];
3826 firmware_partition_index
= i
;
3830 if (firmware_partition
)
3832 os_image_partition
= &info
->partitions
[firmware_partition_index
];
3833 file_system_partition
= &info
->partitions
[firmware_partition_index
+ 1];
3836 if (stat(kernel_image
, &kernel
) < 0)
3837 error(1, errno
, "unable to stat file `%s'", kernel_image
);
3839 if (kernel
.st_size
> firmware_partition
->size
)
3840 error(1, 0, "kernel overflowed firmware partition\n");
3842 for (i
= MAX_PARTITIONS
-1; i
>= firmware_partition_index
+ 1; i
--)
3843 info
->partitions
[i
+1] = info
->partitions
[i
];
3845 file_system_partition
->name
= info
->partition_names
.file_system
;
3847 file_system_partition
->base
= firmware_partition
->base
+ kernel
.st_size
;
3849 /* Align partition start to erase blocks for factory images only */
3851 file_system_partition
->base
= ALIGN(firmware_partition
->base
+ kernel
.st_size
, 0x10000);
3853 file_system_partition
->size
= firmware_partition
->size
- file_system_partition
->base
;
3855 os_image_partition
->name
= info
->partition_names
.os_image
;
3857 os_image_partition
->size
= kernel
.st_size
;
3860 parts
[0] = make_partition_table(info
);
3861 parts
[1] = make_soft_version(info
, rev
);
3862 parts
[2] = make_support_list(info
);
3863 parts
[3] = read_file(info
->partition_names
.os_image
, kernel_image
, false, NULL
);
3864 parts
[4] = read_file(info
->partition_names
.file_system
, rootfs_image
, add_jffs2_eof
, file_system_partition
);
3867 /* Some devices need the extra-para partition to accept the firmware */
3868 if (strcasecmp(info
->id
, "ARCHER-A6-V3") == 0 ||
3869 strcasecmp(info
->id
, "ARCHER-A7-V5") == 0 ||
3870 strcasecmp(info
->id
, "ARCHER-A9-V6") == 0 ||
3871 strcasecmp(info
->id
, "ARCHER-AX23-V1") == 0 ||
3872 strcasecmp(info
->id
, "ARCHER-C2-V3") == 0 ||
3873 strcasecmp(info
->id
, "ARCHER-C7-V4") == 0 ||
3874 strcasecmp(info
->id
, "ARCHER-C7-V5") == 0 ||
3875 strcasecmp(info
->id
, "ARCHER-C25-V1") == 0 ||
3876 strcasecmp(info
->id
, "ARCHER-C59-V2") == 0 ||
3877 strcasecmp(info
->id
, "ARCHER-C60-V2") == 0 ||
3878 strcasecmp(info
->id
, "ARCHER-C60-V3") == 0 ||
3879 strcasecmp(info
->id
, "ARCHER-C6U-V1") == 0 ||
3880 strcasecmp(info
->id
, "ARCHER-C6-V3") == 0 ||
3881 strcasecmp(info
->id
, "DECO-M4R-V4") == 0 ||
3882 strcasecmp(info
->id
, "MR70X") == 0 ||
3883 strcasecmp(info
->id
, "TLWR1043NV5") == 0) {
3884 const uint8_t extra_para
[2] = {0x01, 0x00};
3885 parts
[5] = make_extra_para(info
, extra_para
,
3886 sizeof(extra_para
));
3887 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2") == 0 ||
3888 strcasecmp(info
->id
, "TL-WA1201-V2") == 0) {
3889 const uint8_t extra_para
[2] = {0x00, 0x01};
3890 parts
[5] = make_extra_para(info
, extra_para
,
3891 sizeof(extra_para
));
3892 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2-US") == 0 ||
3893 strcasecmp(info
->id
, "EAP245-V3") == 0) {
3894 const uint8_t extra_para
[2] = {0x01, 0x01};
3895 parts
[5] = make_extra_para(info
, extra_para
,
3896 sizeof(extra_para
));
3902 image
= generate_sysupgrade_image(info
, parts
, &len
);
3904 image
= generate_factory_image(info
, parts
, &len
);
3906 FILE *file
= fopen(output
, "wb");
3908 error(1, errno
, "unable to open output file");
3910 if (fwrite(image
, len
, 1, file
) != 1)
3911 error(1, 0, "unable to write output file");
3917 for (i
= 0; parts
[i
].name
; i
++)
3918 free_image_partition(&parts
[i
]);
3922 static void usage(const char *argv0
) {
3924 "Usage: %s [OPTIONS...]\n"
3927 " -h show this help\n"
3929 "Info about an image:\n"
3930 " -i <file> input file to read from\n"
3931 "Create a new image:\n"
3932 " -B <board> create image for the board specified with <board>\n"
3933 " -k <file> read kernel image from the file <file>\n"
3934 " -r <file> read rootfs image from the file <file>\n"
3935 " -o <file> write output to the file <file>\n"
3936 " -V <rev> sets the revision number to <rev>\n"
3937 " -j add jffs2 end-of-filesystem markers\n"
3938 " -S create sysupgrade instead of factory image\n"
3939 "Extract an old image:\n"
3940 " -x <file> extract all oem firmware partition\n"
3941 " -d <dir> destination to extract the firmware partition\n"
3942 " -z <file> convert an oem firmware into a sysupgade file. Use -o for output file\n",
3948 static struct device_info
*find_board(const char *id
)
3950 struct device_info
*board
= NULL
;
3952 for (board
= boards
; board
->id
!= NULL
; board
++)
3953 if (strcasecmp(id
, board
->id
) == 0)
3959 static int add_flash_partition(
3960 struct flash_partition_entry
*part_list
,
3967 /* check if the list has a free entry */
3968 for (ptr
= 0; ptr
< max_entries
; ptr
++, part_list
++) {
3969 if (part_list
->name
== NULL
&&
3970 part_list
->base
== 0 &&
3971 part_list
->size
== 0)
3975 if (ptr
== max_entries
) {
3976 error(1, 0, "No free flash part entry available.");
3979 part_list
->name
= calloc(1, strlen(name
) + 1);
3980 if (!part_list
->name
) {
3981 error(1, 0, "Unable to allocate memory");
3984 memcpy((char *)part_list
->name
, name
, strlen(name
));
3985 part_list
->base
= base
;
3986 part_list
->size
= size
;
3991 /** read the partition table into struct flash_partition_entry */
3992 enum PARTITION_TABLE_TYPE
{
3993 PARTITION_TABLE_FWUP
,
3994 PARTITION_TABLE_FLASH
,
3997 static int read_partition_table(
3998 FILE *file
, long offset
,
3999 struct flash_partition_entry
*entries
, size_t max_entries
,
4002 char buf
[SAFELOADER_PAYLOAD_TABLE_SIZE
];
4004 const char *parthdr
= NULL
;
4005 const char *fwuphdr
= "fwup-ptn";
4006 const char *flashhdr
= "partition";
4008 /* TODO: search for the partition table */
4011 case PARTITION_TABLE_FWUP
:
4014 case PARTITION_TABLE_FLASH
:
4018 error(1, 0, "Invalid partition table");
4021 if (fseek(file
, offset
, SEEK_SET
) < 0)
4022 error(1, errno
, "Can not seek in the firmware");
4024 if (fread(buf
, sizeof(buf
), 1, file
) != 1)
4025 error(1, errno
, "Can not read fwup-ptn from the firmware");
4027 buf
[sizeof(buf
) - 1] = '\0';
4029 /* look for the partition header */
4030 if (memcmp(buf
, parthdr
, strlen(parthdr
)) != 0) {
4031 fprintf(stderr
, "DEBUG: can not find fwuphdr\n");
4036 end
= buf
+ sizeof(buf
);
4037 while ((ptr
+ strlen(parthdr
)) < end
&&
4038 memcmp(ptr
, parthdr
, strlen(parthdr
)) == 0) {
4042 char name
[32] = { 0 };
4044 unsigned long base
= 0;
4045 unsigned long size
= 0;
4047 end_part
= memchr(ptr
, '\n', (end
- ptr
));
4048 if (end_part
== NULL
) {
4049 /* in theory this should never happen, because a partition always ends with 0x09, 0x0D, 0x0A */
4053 for (int i
= 0; i
<= 4; i
++) {
4054 if (end_part
<= ptr
)
4057 end_element
= memchr(ptr
, 0x20, (end_part
- ptr
));
4058 if (end_element
== NULL
) {
4059 error(1, errno
, "Ignoring the rest of the partition entries.");
4064 /* partition header */
4066 ptr
= end_element
+ 1;
4070 name_len
= (end_element
- ptr
) > 31 ? 31 : (end_element
- ptr
);
4071 strncpy(name
, ptr
, name_len
);
4072 name
[name_len
] = '\0';
4073 ptr
= end_element
+ 1;
4078 ptr
= end_element
+ 1;
4083 base
= strtoul(ptr
, NULL
, 16);
4084 ptr
= end_element
+ 1;
4089 ptr
= end_element
+ 1;
4090 /* actual size. The last element doesn't have a sepeartor */
4091 size
= strtoul(ptr
, NULL
, 16);
4092 /* the part ends with 0x09, 0x0d, 0x0a */
4094 add_flash_partition(entries
, max_entries
, name
, base
, size
);
4103 static void safeloader_read_partition(FILE *input_file
, size_t payload_offset
,
4104 struct flash_partition_entry
*entry
,
4105 struct image_partition_entry
*part
)
4107 size_t part_size
= entry
->size
;
4108 void *part_data
= malloc(part_size
);
4110 if (fseek(input_file
, payload_offset
, SEEK_SET
))
4111 error(1, errno
, "Failed to seek to partition data");
4114 error(1, ENOMEM
, "Failed to allocate partition data");
4116 if (fread(part_data
, 1, part_size
, input_file
) < part_size
)
4117 error(1, errno
, "Failed to read partition data");
4119 part
->data
= part_data
;
4120 part
->size
= part_size
;
4121 part
->name
= entry
->name
;
4124 static void safeloader_parse_image(FILE *input_file
, struct safeloader_image_info
*image
)
4126 static const char *HEADER_ID_CLOUD
= "fw-type:Cloud";
4127 static const char *HEADER_ID_QNEW
= "?NEW";
4134 fseek(input_file
, SAFELOADER_PREAMBLE_SIZE
, SEEK_SET
);
4136 if (fread(buf
, sizeof(buf
), 1, input_file
) != 1)
4137 error(1, errno
, "Can not read image header");
4139 if (memcmp(HEADER_ID_QNEW
, &buf
[0], strlen(HEADER_ID_QNEW
)) == 0)
4140 image
->type
= SAFELOADER_TYPE_QNEW
;
4141 else if (memcmp(HEADER_ID_CLOUD
, &buf
[0], strlen(HEADER_ID_CLOUD
)) == 0)
4142 image
->type
= SAFELOADER_TYPE_CLOUD
;
4143 else if (ntohl(*((uint32_t *) &buf
[0])) <= SAFELOADER_HEADER_SIZE
)
4144 image
->type
= SAFELOADER_TYPE_VENDOR
;
4146 image
->type
= SAFELOADER_TYPE_DEFAULT
;
4148 switch (image
->type
) {
4149 case SAFELOADER_TYPE_DEFAULT
:
4150 case SAFELOADER_TYPE_VENDOR
:
4151 case SAFELOADER_TYPE_CLOUD
:
4152 image
->payload_offset
= SAFELOADER_PAYLOAD_OFFSET
;
4154 case SAFELOADER_TYPE_QNEW
:
4155 image
->payload_offset
= SAFELOADER_QNEW_PAYLOAD_OFFSET
;
4159 /* Parse image partition table */
4160 read_partition_table(input_file
, image
->payload_offset
, &image
->entries
[0],
4161 MAX_PARTITIONS
, PARTITION_TABLE_FWUP
);
4164 static void write_partition(
4166 size_t firmware_offset
,
4167 struct flash_partition_entry
*entry
,
4173 fseek(input_file
, entry
->base
+ firmware_offset
, SEEK_SET
);
4175 for (offset
= 0; sizeof(buf
) + offset
<= entry
->size
; offset
+= sizeof(buf
)) {
4176 if (fread(buf
, sizeof(buf
), 1, input_file
) != 1)
4177 error(1, errno
, "Can not read partition from input_file");
4179 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
4180 error(1, errno
, "Can not write partition to output_file");
4182 /* write last chunk smaller than buffer */
4183 if (offset
< entry
->size
) {
4184 offset
= entry
->size
- offset
;
4185 if (fread(buf
, offset
, 1, input_file
) != 1)
4186 error(1, errno
, "Can not read partition from input_file");
4187 if (fwrite(buf
, offset
, 1, output_file
) != 1)
4188 error(1, errno
, "Can not write partition to output_file");
4192 static int extract_firmware_partition(FILE *input_file
, size_t firmware_offset
, struct flash_partition_entry
*entry
, const char *output_directory
)
4195 char output
[PATH_MAX
];
4197 snprintf(output
, PATH_MAX
, "%s/%s", output_directory
, entry
->name
);
4198 output_file
= fopen(output
, "wb+");
4199 if (output_file
== NULL
) {
4200 error(1, errno
, "Can not open output file %s", output
);
4203 write_partition(input_file
, firmware_offset
, entry
, output_file
);
4205 fclose(output_file
);
4210 /** extract all partitions from the firmware file */
4211 static int extract_firmware(const char *input
, const char *output_directory
)
4213 struct safeloader_image_info info
= {};
4214 struct stat statbuf
;
4217 /* check input file */
4218 if (stat(input
, &statbuf
)) {
4219 error(1, errno
, "Can not read input firmware %s", input
);
4222 /* check if output directory exists */
4223 if (stat(output_directory
, &statbuf
)) {
4224 error(1, errno
, "Failed to stat output directory %s", output_directory
);
4227 if ((statbuf
.st_mode
& S_IFMT
) != S_IFDIR
) {
4228 error(1, errno
, "Given output directory is not a directory %s", output_directory
);
4231 input_file
= fopen(input
, "rb");
4232 safeloader_parse_image(input_file
, &info
);
4234 for (size_t i
= 0; i
< MAX_PARTITIONS
&& info
.entries
[i
].name
; i
++)
4235 extract_firmware_partition(input_file
, info
.payload_offset
, &info
.entries
[i
], output_directory
);
4240 static struct flash_partition_entry
*find_partition(
4241 struct flash_partition_entry
*entries
, size_t max_entries
,
4242 const char *name
, const char *error_msg
)
4244 for (size_t i
= 0; i
< max_entries
; i
++, entries
++) {
4245 if (strcmp(entries
->name
, name
) == 0)
4250 error(1, 0, "%s", error_msg
);
4256 static int firmware_info(const char *input
)
4258 struct safeloader_image_info info
= {};
4259 struct image_partition_entry part
= {};
4260 struct flash_partition_entry
*e
;
4263 input_file
= fopen(input
, "rb");
4265 safeloader_parse_image(input_file
, &info
);
4267 if (info
.type
== SAFELOADER_TYPE_VENDOR
) {
4268 char buf
[SAFELOADER_HEADER_SIZE
] = {};
4269 uint32_t vendor_size
;
4271 fseek(input_file
, SAFELOADER_PREAMBLE_SIZE
, SEEK_SET
);
4272 fread(&vendor_size
, sizeof(uint32_t), 1, input_file
);
4274 vendor_size
= ntohl(vendor_size
);
4275 fread(buf
, vendor_size
, 1, input_file
);
4277 printf("Firmware vendor string:\n");
4278 fwrite(buf
, strnlen(buf
, vendor_size
), 1, stdout
);
4282 printf("Firmware image partitions:\n");
4283 printf("%-8s %-8s %s\n", "base", "size", "name");
4285 e
= &info
.entries
[0];
4286 for (unsigned int i
= 0; i
< MAX_PARTITIONS
&& e
->name
; i
++, e
++)
4287 printf("%08x %08x %s\n", e
->base
, e
->size
, e
->name
);
4289 e
= find_partition(&info
.entries
[0], MAX_PARTITIONS
, "soft-version", NULL
);
4291 struct soft_version
*s
;
4292 unsigned int ascii_len
;
4297 safeloader_read_partition(input_file
, info
.payload_offset
+ e
->base
, e
, &part
);
4298 data_len
= ntohl(((struct meta_header
*) part
.data
)->length
);
4299 buf
= part
.data
+ sizeof(struct meta_header
);
4301 /* Check for (null-terminated) string */
4303 while (ascii_len
< data_len
&& isascii(buf
[ascii_len
]))
4306 isstr
= ascii_len
== data_len
;
4308 printf("\n[Software version]\n");
4310 fwrite(buf
, strnlen((const char *) buf
, data_len
), 1, stdout
);
4312 } else if (data_len
>= offsetof(struct soft_version
, rev
)) {
4313 s
= (struct soft_version
*) buf
;
4315 printf("Version: %d.%d.%d\n", s
->version_major
, s
->version_minor
, s
->version_patch
);
4316 printf("Date: %02x%02x-%02x-%02x\n", s
->year_hi
, s
->year_lo
, s
->month
, s
->day
);
4317 printf("Revision: %d\n", ntohl(s
->rev
));
4319 if (data_len
>= offsetof(struct soft_version
, compat_level
)) {
4320 printf("Compatibility level: %d\n", ntohl(s
->compat_level
));
4323 printf("Failed to parse data\n");
4326 free_image_partition(&part
);
4329 e
= find_partition(&info
.entries
[0], MAX_PARTITIONS
, "support-list", NULL
);
4333 safeloader_read_partition(input_file
, info
.payload_offset
+ e
->base
, e
, &part
);
4334 data_len
= ntohl(((struct meta_header
*) part
.data
)->length
);
4336 printf("\n[Support list]\n");
4337 fwrite(part
.data
+ sizeof(struct meta_header
), data_len
, 1, stdout
);
4340 free_image_partition(&part
);
4343 e
= find_partition(&info
.entries
[0], MAX_PARTITIONS
, "partition-table", NULL
);
4345 size_t flash_table_offset
= info
.payload_offset
+ e
->base
+ 4;
4346 struct flash_partition_entry parts
[MAX_PARTITIONS
] = {};
4348 if (read_partition_table(input_file
, flash_table_offset
, parts
, MAX_PARTITIONS
, PARTITION_TABLE_FLASH
))
4349 error(1, 0, "Error can not read the partition table (partition)");
4351 printf("\n[Partition table]\n");
4352 printf("%-8s %-8s %s\n", "base", "size", "name");
4355 for (unsigned int i
= 0; i
< MAX_PARTITIONS
&& e
->name
; i
++, e
++)
4356 printf("%08x %08x %s\n", e
->base
, e
->size
, e
->name
);
4364 static void write_ff(FILE *output_file
, size_t size
)
4369 memset(buf
, 0xff, sizeof(buf
));
4371 for (offset
= 0; offset
+ sizeof(buf
) < size
; offset
+= sizeof(buf
)) {
4372 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
4373 error(1, errno
, "Can not write 0xff to output_file");
4376 /* write last chunk smaller than buffer */
4377 if (offset
< size
) {
4378 offset
= size
- offset
;
4379 if (fwrite(buf
, offset
, 1, output_file
) != 1)
4380 error(1, errno
, "Can not write partition to output_file");
4384 static void convert_firmware(const char *input
, const char *output
)
4386 struct flash_partition_entry flash
[MAX_PARTITIONS
] = {};
4387 struct flash_partition_entry
*fwup_partition_table
;
4388 struct flash_partition_entry
*flash_file_system
;
4389 struct flash_partition_entry
*fwup_file_system
;
4390 struct flash_partition_entry
*flash_os_image
;
4391 struct flash_partition_entry
*fwup_os_image
;
4392 struct safeloader_image_info info
= {};
4393 size_t flash_table_offset
;
4394 struct stat statbuf
;
4398 /* check input file */
4399 if (stat(input
, &statbuf
)) {
4400 error(1, errno
, "Can not read input firmware %s", input
);
4403 input_file
= fopen(input
, "rb");
4405 error(1, 0, "Can not open input firmware %s", input
);
4407 output_file
= fopen(output
, "wb");
4409 error(1, 0, "Can not open output firmware %s", output
);
4411 input_file
= fopen(input
, "rb");
4412 safeloader_parse_image(input_file
, &info
);
4414 fwup_os_image
= find_partition(info
.entries
, MAX_PARTITIONS
,
4415 "os-image", "Error can not find os-image partition (fwup)");
4416 fwup_file_system
= find_partition(info
.entries
, MAX_PARTITIONS
,
4417 "file-system", "Error can not find file-system partition (fwup)");
4418 fwup_partition_table
= find_partition(info
.entries
, MAX_PARTITIONS
,
4419 "partition-table", "Error can not find partition-table partition");
4421 /* the flash partition table has a 0x00000004 magic haeder */
4422 flash_table_offset
= info
.payload_offset
+ fwup_partition_table
->base
+ 4;
4423 if (read_partition_table(input_file
, flash_table_offset
, flash
, MAX_PARTITIONS
, PARTITION_TABLE_FLASH
) != 0)
4424 error(1, 0, "Error can not read the partition table (flash)");
4426 flash_os_image
= find_partition(flash
, MAX_PARTITIONS
,
4427 "os-image", "Error can not find os-image partition (flash)");
4428 flash_file_system
= find_partition(flash
, MAX_PARTITIONS
,
4429 "file-system", "Error can not find file-system partition (flash)");
4431 /* write os_image to 0x0 */
4432 write_partition(input_file
, info
.payload_offset
, fwup_os_image
, output_file
);
4433 write_ff(output_file
, flash_os_image
->size
- fwup_os_image
->size
);
4435 /* write file-system behind os_image */
4436 fseek(output_file
, flash_file_system
->base
- flash_os_image
->base
, SEEK_SET
);
4437 write_partition(input_file
, info
.payload_offset
, fwup_file_system
, output_file
);
4439 fclose(output_file
);
4443 int main(int argc
, char *argv
[]) {
4444 const char *info_image
= NULL
, *board
= NULL
, *kernel_image
= NULL
, *rootfs_image
= NULL
, *output
= NULL
;
4445 const char *extract_image
= NULL
, *output_directory
= NULL
, *convert_image
= NULL
;
4446 bool add_jffs2_eof
= false, sysupgrade
= false;
4448 struct device_info
*info
;
4449 set_source_date_epoch();
4454 c
= getopt(argc
, argv
, "i:B:k:r:o:V:jSh:x:d:z:");
4460 info_image
= optarg
;
4468 kernel_image
= optarg
;
4472 rootfs_image
= optarg
;
4480 sscanf(optarg
, "r%u", &rev
);
4484 add_jffs2_eof
= true;
4496 output_directory
= optarg
;
4500 extract_image
= optarg
;
4504 convert_image
= optarg
;
4514 firmware_info(info_image
);
4515 } else if (extract_image
|| output_directory
) {
4517 error(1, 0, "No factory/oem image given via -x <file>. Output directory is only valid with -x");
4518 if (!output_directory
)
4519 error(1, 0, "Can not extract an image without output directory. Use -d <dir>");
4520 extract_firmware(extract_image
, output_directory
);
4521 } else if (convert_image
) {
4523 error(1, 0, "Can not convert a factory/oem image into sysupgrade image without output file. Use -o <file>");
4524 convert_firmware(convert_image
, output
);
4527 error(1, 0, "no board has been specified");
4529 error(1, 0, "no kernel image has been specified");
4531 error(1, 0, "no rootfs image has been specified");
4533 error(1, 0, "no output filename has been specified");
4535 info
= find_board(board
);
4538 error(1, 0, "unsupported board %s", board
);
4540 build_image(output
, kernel_image
, rootfs_image
, rev
, add_jffs2_eof
, sysupgrade
, info
);