1 // SPDX-License-Identifier: BSD-2-Clause
3 Copyright (c) 2014, Matthias Schiffer <mschiffer@universe-factory.net>
11 Image generation tool for the TP-LINK SafeLoader as seen on
12 TP-LINK Pharos devices (CPE210/220/510/520)
28 #include <arpa/inet.h>
30 #include <sys/types.h>
37 #define ALIGN(x,a) ({ typeof(a) __a = (a); (((x) + __a - 1) & ~(__a - 1)); })
40 #define MAX_PARTITIONS 32
42 /** An image partition table entry */
43 struct image_partition_entry
{
49 /** A flash partition table entry */
50 struct flash_partition_entry
{
56 /** Flash partition names table entry */
57 struct factory_partition_names
{
58 const char *partition_table
;
61 const char *support_list
;
62 const char *file_system
;
63 const char *extra_para
;
66 /** Partition trailing padding definitions
67 * Values 0x00 to 0xff are reserved to indicate the padding value
68 * Values from 0x100 are reserved to indicate other behaviour */
69 enum partition_trail_value
{
72 PART_TRAIL_MAX
= 0xff,
73 PART_TRAIL_NONE
= 0x100
76 /** soft-version value overwrite types
77 * The default (for an uninitialised soft_ver field) is to use the numerical
78 * version number "0.0.0"
81 SOFT_VER_TYPE_NUMERIC
= 0,
82 SOFT_VER_TYPE_TEXT
= 1,
85 /** Firmware layout description */
89 const char *support_list
;
90 enum partition_trail_value part_trail
;
92 enum soft_ver_type type
;
98 uint32_t soft_ver_compat_level
;
99 struct flash_partition_entry partitions
[MAX_PARTITIONS
+1];
100 const char *first_sysupgrade_partition
;
101 const char *last_sysupgrade_partition
;
102 struct factory_partition_names partition_names
;
105 #define SOFT_VER_TEXT(_t) {.type = SOFT_VER_TYPE_TEXT, .text = _t}
106 #define SOFT_VER_NUMERIC(_maj, _min, _patch) { \
107 .type = SOFT_VER_TYPE_NUMERIC, \
108 .num = {_maj, _min, _patch}}
109 #define SOFT_VER_DEFAULT SOFT_VER_NUMERIC(0, 0, 0)
111 struct __attribute__((__packed__
)) meta_header
{
116 /** The content of the soft-version structure */
117 struct __attribute__((__packed__
)) soft_version
{
119 uint8_t version_major
;
120 uint8_t version_minor
;
121 uint8_t version_patch
;
127 uint32_t compat_level
;
131 * Safeloader image type
132 * Safeloader images contain a 0x14 byte preamble with image size (big endian
133 * UINT32) and md5 checksum (16 bytes).
135 * SAFEFLOADER_TYPE_DEFAULT
136 * Standard preamble with size including preamble length, and checksum.
137 * Header of 0x1000 bytes, contents of which are not specified.
138 * Payload starts at offset 0x1014.
140 * SAFELOADER_TYPE_VENDOR
141 * Standard preamble with size including preamble length, and checksum.
142 * Header contains up to 0x1000 bytes of vendor data, starting with a big endian
143 * UINT32 size, followed by that number of bytes containing (text) data.
144 * Padded with 0xFF. Payload starts at offset 0x1014.
146 * SAFELOADER_TYPE_CLOUD
147 * Standard preamble with size including preamble length, and checksum.
148 * Followed by the 'fw-type:Cloud' string and some (unknown) data.
149 * Payload starts at offset 0x1014.
151 * SAFELOADER_TYPE_QNEW
152 * Reversed order preamble, with (apparent) md5 checksum before the image
153 * size. The size does not include the preamble length.
154 * Header starts with 0x3C bytes, starting with the string '?NEW' (format not
155 * understood). Then another 0x1000 bytes follow, with the data payload
156 * starting at 0x1050.
158 enum safeloader_image_type
{
159 SAFELOADER_TYPE_DEFAULT
,
160 SAFELOADER_TYPE_VENDOR
,
161 SAFELOADER_TYPE_CLOUD
,
162 SAFELOADER_TYPE_QNEW
,
165 /* Internal representation of safeloader image data */
166 struct safeloader_image_info
{
167 enum safeloader_image_type type
;
168 size_t payload_offset
;
169 struct flash_partition_entry entries
[MAX_PARTITIONS
];
172 #define SAFELOADER_PREAMBLE_SIZE 0x14
173 #define SAFELOADER_HEADER_SIZE 0x1000
174 #define SAFELOADER_PAYLOAD_OFFSET (SAFELOADER_PREAMBLE_SIZE + SAFELOADER_HEADER_SIZE)
176 #define SAFELOADER_QNEW_HEADER_SIZE 0x3C
177 #define SAFELOADER_QNEW_PAYLOAD_OFFSET \
178 (SAFELOADER_PREAMBLE_SIZE + SAFELOADER_QNEW_HEADER_SIZE + SAFELOADER_HEADER_SIZE)
180 #define SAFELOADER_PAYLOAD_TABLE_SIZE 0x800
182 static const uint8_t jffs2_eof_mark
[4] = {0xde, 0xad, 0xc0, 0xde};
186 Salt for the MD5 hash
188 Fortunately, TP-LINK seems to use the same salt for most devices which use
189 the new image format.
191 static const uint8_t md5_salt
[16] = {
192 0x7a, 0x2b, 0x15, 0xed,
193 0x9b, 0x98, 0x59, 0x6d,
194 0xe5, 0x04, 0xab, 0x44,
195 0xac, 0x2a, 0x9f, 0x4e,
199 /** Firmware layout table */
200 static struct device_info boards
[] = {
201 /** Firmware layout for the CPE210/220 V1 */
204 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
207 "CPE210(TP-LINK|UN|N300-2):1.0\r\n"
208 "CPE210(TP-LINK|UN|N300-2):1.1\r\n"
209 "CPE210(TP-LINK|US|N300-2):1.1\r\n"
210 "CPE210(TP-LINK|EU|N300-2):1.1\r\n"
211 "CPE220(TP-LINK|UN|N300-2):1.1\r\n"
212 "CPE220(TP-LINK|US|N300-2):1.1\r\n"
213 "CPE220(TP-LINK|EU|N300-2):1.1\r\n",
215 .soft_ver
= SOFT_VER_DEFAULT
,
218 {"fs-uboot", 0x00000, 0x20000},
219 {"partition-table", 0x20000, 0x02000},
220 {"default-mac", 0x30000, 0x00020},
221 {"product-info", 0x31100, 0x00100},
222 {"signature", 0x32000, 0x00400},
223 {"firmware", 0x40000, 0x770000},
224 {"soft-version", 0x7b0000, 0x00100},
225 {"support-list", 0x7b1000, 0x00400},
226 {"user-config", 0x7c0000, 0x10000},
227 {"default-config", 0x7d0000, 0x10000},
228 {"log", 0x7e0000, 0x10000},
229 {"radio", 0x7f0000, 0x10000},
233 .first_sysupgrade_partition
= "os-image",
234 .last_sysupgrade_partition
= "support-list",
237 /** Firmware layout for the CPE210 V2 */
240 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n",
243 "CPE210(TP-LINK|EU|N300-2|00000000):2.0\r\n"
244 "CPE210(TP-LINK|EU|N300-2|45550000):2.0\r\n"
245 "CPE210(TP-LINK|EU|N300-2|55530000):2.0\r\n"
246 "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
247 "CPE210(TP-LINK|UN|N300-2|45550000):2.0\r\n"
248 "CPE210(TP-LINK|UN|N300-2|55530000):2.0\r\n"
249 "CPE210(TP-LINK|US|N300-2|55530000):2.0\r\n"
250 "CPE210(TP-LINK|UN|N300-2):2.0\r\n"
251 "CPE210(TP-LINK|EU|N300-2):2.0\r\n"
252 "CPE210(TP-LINK|US|N300-2):2.0\r\n",
254 .soft_ver
= SOFT_VER_DEFAULT
,
257 {"fs-uboot", 0x00000, 0x20000},
258 {"partition-table", 0x20000, 0x02000},
259 {"default-mac", 0x30000, 0x00020},
260 {"product-info", 0x31100, 0x00100},
261 {"device-info", 0x31400, 0x00400},
262 {"signature", 0x32000, 0x00400},
263 {"device-id", 0x33000, 0x00100},
264 {"firmware", 0x40000, 0x770000},
265 {"soft-version", 0x7b0000, 0x00100},
266 {"support-list", 0x7b1000, 0x01000},
267 {"user-config", 0x7c0000, 0x10000},
268 {"default-config", 0x7d0000, 0x10000},
269 {"log", 0x7e0000, 0x10000},
270 {"radio", 0x7f0000, 0x10000},
274 .first_sysupgrade_partition
= "os-image",
275 .last_sysupgrade_partition
= "support-list",
278 /** Firmware layout for the CPE210 V3 */
281 .vendor
= "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n",
284 "CPE210(TP-LINK|EU|N300-2|45550000):3.0\r\n"
285 "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n"
286 "CPE210(TP-LINK|US|N300-2|55530000):3.0\r\n"
287 "CPE210(TP-LINK|UN|N300-2):3.0\r\n"
288 "CPE210(TP-LINK|EU|N300-2):3.0\r\n"
289 "CPE210(TP-LINK|EU|N300-2|45550000):3.1\r\n"
290 "CPE210(TP-LINK|UN|N300-2|00000000):3.1\r\n"
291 "CPE210(TP-LINK|US|N300-2|55530000):3.1\r\n"
292 "CPE210(TP-LINK|EU|N300-2|45550000):3.20\r\n"
293 "CPE210(TP-LINK|UN|N300-2|00000000):3.20\r\n"
294 "CPE210(TP-LINK|US|N300-2|55530000):3.20\r\n",
296 .soft_ver
= SOFT_VER_DEFAULT
,
299 {"fs-uboot", 0x00000, 0x20000},
300 {"partition-table", 0x20000, 0x01000},
301 {"default-mac", 0x30000, 0x00020},
302 {"product-info", 0x31100, 0x00100},
303 {"device-info", 0x31400, 0x00400},
304 {"signature", 0x32000, 0x00400},
305 {"device-id", 0x33000, 0x00100},
306 {"firmware", 0x40000, 0x770000},
307 {"soft-version", 0x7b0000, 0x00100},
308 {"support-list", 0x7b1000, 0x01000},
309 {"user-config", 0x7c0000, 0x10000},
310 {"default-config", 0x7d0000, 0x10000},
311 {"log", 0x7e0000, 0x10000},
312 {"radio", 0x7f0000, 0x10000},
316 .first_sysupgrade_partition
= "os-image",
317 .last_sysupgrade_partition
= "support-list",
320 /** Firmware layout for the CPE220 V2 */
323 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
326 "CPE220(TP-LINK|EU|N300-2|00000000):2.0\r\n"
327 "CPE220(TP-LINK|EU|N300-2|45550000):2.0\r\n"
328 "CPE220(TP-LINK|EU|N300-2|55530000):2.0\r\n"
329 "CPE220(TP-LINK|UN|N300-2|00000000):2.0\r\n"
330 "CPE220(TP-LINK|UN|N300-2|45550000):2.0\r\n"
331 "CPE220(TP-LINK|UN|N300-2|55530000):2.0\r\n"
332 "CPE220(TP-LINK|US|N300-2|55530000):2.0\r\n"
333 "CPE220(TP-LINK|UN|N300-2):2.0\r\n"
334 "CPE220(TP-LINK|EU|N300-2):2.0\r\n"
335 "CPE220(TP-LINK|US|N300-2):2.0\r\n",
337 .soft_ver
= SOFT_VER_DEFAULT
,
340 {"fs-uboot", 0x00000, 0x20000},
341 {"partition-table", 0x20000, 0x02000},
342 {"default-mac", 0x30000, 0x00020},
343 {"product-info", 0x31100, 0x00100},
344 {"signature", 0x32000, 0x00400},
345 {"firmware", 0x40000, 0x770000},
346 {"soft-version", 0x7b0000, 0x00100},
347 {"support-list", 0x7b1000, 0x00400},
348 {"user-config", 0x7c0000, 0x10000},
349 {"default-config", 0x7d0000, 0x10000},
350 {"log", 0x7e0000, 0x10000},
351 {"radio", 0x7f0000, 0x10000},
355 .first_sysupgrade_partition
= "os-image",
356 .last_sysupgrade_partition
= "support-list",
359 /** Firmware layout for the CPE220 V3 */
362 .vendor
= "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n",
365 "CPE220(TP-LINK|EU|N300-2|00000000):3.0\r\n"
366 "CPE220(TP-LINK|EU|N300-2|45550000):3.0\r\n"
367 "CPE220(TP-LINK|EU|N300-2|55530000):3.0\r\n"
368 "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n"
369 "CPE220(TP-LINK|UN|N300-2|45550000):3.0\r\n"
370 "CPE220(TP-LINK|UN|N300-2|55530000):3.0\r\n"
371 "CPE220(TP-LINK|US|N300-2|55530000):3.0\r\n"
372 "CPE220(TP-LINK|UN|N300-2):3.0\r\n"
373 "CPE220(TP-LINK|EU|N300-2):3.0\r\n"
374 "CPE220(TP-LINK|US|N300-2):3.0\r\n",
376 .soft_ver
= SOFT_VER_DEFAULT
,
379 {"fs-uboot", 0x00000, 0x20000},
380 {"partition-table", 0x20000, 0x02000},
381 {"default-mac", 0x30000, 0x00020},
382 {"product-info", 0x31100, 0x00100},
383 {"device-info", 0x31400, 0x00400},
384 {"signature", 0x32000, 0x00400},
385 {"device-id", 0x33000, 0x00100},
386 {"firmware", 0x40000, 0x770000},
387 {"soft-version", 0x7b0000, 0x00100},
388 {"support-list", 0x7b1000, 0x01000},
389 {"user-config", 0x7c0000, 0x10000},
390 {"default-config", 0x7d0000, 0x10000},
391 {"log", 0x7e0000, 0x10000},
392 {"radio", 0x7f0000, 0x10000},
396 .first_sysupgrade_partition
= "os-image",
397 .last_sysupgrade_partition
= "support-list",
400 /** Firmware layout for the CPE510/520 V1 */
403 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
406 "CPE510(TP-LINK|UN|N300-5):1.0\r\n"
407 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
408 "CPE510(TP-LINK|UN|N300-5):1.1\r\n"
409 "CPE510(TP-LINK|US|N300-5):1.1\r\n"
410 "CPE510(TP-LINK|CA|N300-5):1.1\r\n"
411 "CPE510(TP-LINK|EU|N300-5):1.1\r\n"
412 "CPE520(TP-LINK|UN|N300-5):1.1\r\n"
413 "CPE520(TP-LINK|US|N300-5):1.1\r\n"
414 "CPE520(TP-LINK|EU|N300-5):1.1\r\n",
416 .soft_ver
= SOFT_VER_DEFAULT
,
419 {"fs-uboot", 0x00000, 0x20000},
420 {"partition-table", 0x20000, 0x02000},
421 {"default-mac", 0x30000, 0x00020},
422 {"product-info", 0x31100, 0x00100},
423 {"signature", 0x32000, 0x00400},
424 {"firmware", 0x40000, 0x770000},
425 {"soft-version", 0x7b0000, 0x00100},
426 {"support-list", 0x7b1000, 0x00400},
427 {"user-config", 0x7c0000, 0x10000},
428 {"default-config", 0x7d0000, 0x10000},
429 {"log", 0x7e0000, 0x10000},
430 {"radio", 0x7f0000, 0x10000},
434 .first_sysupgrade_partition
= "os-image",
435 .last_sysupgrade_partition
= "support-list",
438 /** Firmware layout for the CPE510 V2 */
441 .vendor
= "CPE510(TP-LINK|UN|N300-5):2.0\r\n",
444 "CPE510(TP-LINK|EU|N300-5|00000000):2.0\r\n"
445 "CPE510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
446 "CPE510(TP-LINK|EU|N300-5|55530000):2.0\r\n"
447 "CPE510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
448 "CPE510(TP-LINK|UN|N300-5|45550000):2.0\r\n"
449 "CPE510(TP-LINK|UN|N300-5|55530000):2.0\r\n"
450 "CPE510(TP-LINK|US|N300-5|00000000):2.0\r\n"
451 "CPE510(TP-LINK|US|N300-5|45550000):2.0\r\n"
452 "CPE510(TP-LINK|US|N300-5|55530000):2.0\r\n"
453 "CPE510(TP-LINK|UN|N300-5):2.0\r\n"
454 "CPE510(TP-LINK|EU|N300-5):2.0\r\n"
455 "CPE510(TP-LINK|US|N300-5):2.0\r\n",
457 .soft_ver
= SOFT_VER_DEFAULT
,
460 {"fs-uboot", 0x00000, 0x20000},
461 {"partition-table", 0x20000, 0x02000},
462 {"default-mac", 0x30000, 0x00020},
463 {"product-info", 0x31100, 0x00100},
464 {"signature", 0x32000, 0x00400},
465 {"firmware", 0x40000, 0x770000},
466 {"soft-version", 0x7b0000, 0x00100},
467 {"support-list", 0x7b1000, 0x00400},
468 {"user-config", 0x7c0000, 0x10000},
469 {"default-config", 0x7d0000, 0x10000},
470 {"log", 0x7e0000, 0x10000},
471 {"radio", 0x7f0000, 0x10000},
475 .first_sysupgrade_partition
= "os-image",
476 .last_sysupgrade_partition
= "support-list",
479 /** Firmware layout for the CPE510 V3 */
482 .vendor
= "CPE510(TP-LINK|UN|N300-5):3.0\r\n",
485 "CPE510(TP-LINK|EU|N300-5|00000000):3.0\r\n"
486 "CPE510(TP-LINK|EU|N300-5|45550000):3.0\r\n"
487 "CPE510(TP-LINK|EU|N300-5|55530000):3.0\r\n"
488 "CPE510(TP-LINK|UN|N300-5|00000000):3.0\r\n"
489 "CPE510(TP-LINK|UN|N300-5|45550000):3.0\r\n"
490 "CPE510(TP-LINK|UN|N300-5|55530000):3.0\r\n"
491 "CPE510(TP-LINK|US|N300-5|00000000):3.0\r\n"
492 "CPE510(TP-LINK|US|N300-5|45550000):3.0\r\n"
493 "CPE510(TP-LINK|US|N300-5|55530000):3.0\r\n"
494 "CPE510(TP-LINK|UN|N300-5):3.0\r\n"
495 "CPE510(TP-LINK|EU|N300-5):3.0\r\n"
496 "CPE510(TP-LINK|US|N300-5):3.0\r\n"
497 "CPE510(TP-LINK|UN|N300-5|00000000):3.20\r\n"
498 "CPE510(TP-LINK|US|N300-5|55530000):3.20\r\n"
499 "CPE510(TP-LINK|EU|N300-5|45550000):3.20\r\n",
501 .soft_ver
= SOFT_VER_DEFAULT
,
504 {"fs-uboot", 0x00000, 0x20000},
505 {"partition-table", 0x20000, 0x02000},
506 {"default-mac", 0x30000, 0x00020},
507 {"product-info", 0x31100, 0x00100},
508 {"signature", 0x32000, 0x00400},
509 {"firmware", 0x40000, 0x770000},
510 {"soft-version", 0x7b0000, 0x00100},
511 {"support-list", 0x7b1000, 0x00400},
512 {"user-config", 0x7c0000, 0x10000},
513 {"default-config", 0x7d0000, 0x10000},
514 {"log", 0x7e0000, 0x10000},
515 {"radio", 0x7f0000, 0x10000},
519 .first_sysupgrade_partition
= "os-image",
520 .last_sysupgrade_partition
= "support-list",
523 /** Firmware layout for the CPE605V1 */
526 .vendor
= "CPE605(TP-LINK|UN|N150-5):1.0\r\n",
529 "CPE605(TP-LINK|UN|N150-5|00000000):1.0\r\n"
530 "CPE605(TP-LINK|EU|N150-5|45550000):1.0\r\n"
531 "CPE605(TP-LINK|US|N150-5|55530000):1.0\r\n",
533 .soft_ver
= SOFT_VER_DEFAULT
,
536 {"fs-uboot", 0x00000, 0x20000},
537 {"partition-table", 0x20000, 0x02000},
538 {"default-mac", 0x30000, 0x00020},
539 {"serial-number", 0x30100, 0x00020},
540 {"product-info", 0x31100, 0x00100},
541 {"device-info", 0x31400, 0x00400},
542 {"signature", 0x32000, 0x00400},
543 {"device-id", 0x33000, 0x00100},
544 {"firmware", 0x40000, 0x770000},
545 {"soft-version", 0x7b0000, 0x00100},
546 {"support-list", 0x7b1000, 0x01000},
547 {"user-config", 0x7c0000, 0x10000},
548 {"default-config", 0x7d0000, 0x10000},
549 {"log", 0x7e0000, 0x10000},
550 {"radio", 0x7f0000, 0x10000},
554 .first_sysupgrade_partition
= "os-image",
555 .last_sysupgrade_partition
= "support-list",
558 /** Firmware layout for the CPE610V1 */
561 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n",
564 "CPE610(TP-LINK|EU|N300-5|00000000):1.0\r\n"
565 "CPE610(TP-LINK|EU|N300-5|45550000):1.0\r\n"
566 "CPE610(TP-LINK|EU|N300-5|55530000):1.0\r\n"
567 "CPE610(TP-LINK|UN|N300-5|00000000):1.0\r\n"
568 "CPE610(TP-LINK|UN|N300-5|45550000):1.0\r\n"
569 "CPE610(TP-LINK|UN|N300-5|55530000):1.0\r\n"
570 "CPE610(TP-LINK|US|N300-5|55530000):1.0\r\n"
571 "CPE610(TP-LINK|UN|N300-5):1.0\r\n"
572 "CPE610(TP-LINK|EU|N300-5):1.0\r\n"
573 "CPE610(TP-LINK|US|N300-5):1.0\r\n",
575 .soft_ver
= SOFT_VER_DEFAULT
,
578 {"fs-uboot", 0x00000, 0x20000},
579 {"partition-table", 0x20000, 0x02000},
580 {"default-mac", 0x30000, 0x00020},
581 {"product-info", 0x31100, 0x00100},
582 {"signature", 0x32000, 0x00400},
583 {"firmware", 0x40000, 0x770000},
584 {"soft-version", 0x7b0000, 0x00100},
585 {"support-list", 0x7b1000, 0x00400},
586 {"user-config", 0x7c0000, 0x10000},
587 {"default-config", 0x7d0000, 0x10000},
588 {"log", 0x7e0000, 0x10000},
589 {"radio", 0x7f0000, 0x10000},
593 .first_sysupgrade_partition
= "os-image",
594 .last_sysupgrade_partition
= "support-list",
597 /** Firmware layout for the CPE610V2 */
600 .vendor
= "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n",
603 "CPE610(TP-LINK|EU|N300-5|00000000):2.0\r\n"
604 "CPE610(TP-LINK|EU|N300-5|45550000):2.0\r\n"
605 "CPE610(TP-LINK|EU|N300-5|55530000):2.0\r\n"
606 "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n"
607 "CPE610(TP-LINK|UN|N300-5|45550000):2.0\r\n"
608 "CPE610(TP-LINK|UN|N300-5|55530000):2.0\r\n"
609 "CPE610(TP-LINK|US|N300-5|55530000):2.0\r\n"
610 "CPE610(TP-LINK|UN|N300-5):2.0\r\n"
611 "CPE610(TP-LINK|EU|N300-5):2.0\r\n"
612 "CPE610(TP-LINK|US|N300-5):2.0\r\n",
614 .soft_ver
= SOFT_VER_DEFAULT
,
617 {"fs-uboot", 0x00000, 0x20000},
618 {"partition-table", 0x20000, 0x02000},
619 {"default-mac", 0x30000, 0x00020},
620 {"product-info", 0x31100, 0x00100},
621 {"signature", 0x32000, 0x00400},
622 {"firmware", 0x40000, 0x770000},
623 {"soft-version", 0x7b0000, 0x00100},
624 {"support-list", 0x7b1000, 0x00400},
625 {"user-config", 0x7c0000, 0x10000},
626 {"default-config", 0x7d0000, 0x10000},
627 {"log", 0x7e0000, 0x10000},
628 {"radio", 0x7f0000, 0x10000},
632 .first_sysupgrade_partition
= "os-image",
633 .last_sysupgrade_partition
= "support-list",
635 /** Firmware layout for the CPE710 V1 */
638 .vendor
= "CPE710(TP-LINK|UN|AC866-5|00000000):1.0\r\n",
641 "CPE710(TP-LINK|UN|AC866-5|00000000):1.0\r\n"
642 "CPE710(TP-LINK|EU|AC866-5|45550000):1.0\r\n"
643 "CPE710(TP-LINK|US|AC866-5|55530000):1.0\r\n"
644 "CPE710(TP-LINK|UN|AC866-5):1.0\r\n"
645 "CPE710(TP-LINK|EU|AC866-5):1.0\r\n"
646 "CPE710(TP-LINK|US|AC866-5):1.0\r\n",
648 .soft_ver
= SOFT_VER_DEFAULT
,
651 {"fs-uboot", 0x00000, 0x50000},
652 {"partition-table", 0x50000, 0x02000},
653 {"default-mac", 0x60000, 0x00020},
654 {"serial-number", 0x60100, 0x00020},
655 {"product-info", 0x61100, 0x00100},
656 {"device-info", 0x61400, 0x00400},
657 {"signature", 0x62000, 0x00400},
658 {"device-id", 0x63000, 0x00100},
659 {"firmware", 0x70000, 0xf40000},
660 {"soft-version", 0xfb0000, 0x00100},
661 {"support-list", 0xfb1000, 0x01000},
662 {"user-config", 0xfc0000, 0x10000},
663 {"default-config", 0xfd0000, 0x10000},
664 {"log", 0xfe0000, 0x10000},
665 {"radio", 0xff0000, 0x10000},
669 .first_sysupgrade_partition
= "os-image",
670 .last_sysupgrade_partition
= "support-list",
675 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
678 "WBS210(TP-LINK|UN|N300-2):1.20\r\n"
679 "WBS210(TP-LINK|US|N300-2):1.20\r\n"
680 "WBS210(TP-LINK|EU|N300-2):1.20\r\n",
682 .soft_ver
= SOFT_VER_DEFAULT
,
685 {"fs-uboot", 0x00000, 0x20000},
686 {"partition-table", 0x20000, 0x02000},
687 {"default-mac", 0x30000, 0x00020},
688 {"product-info", 0x31100, 0x00100},
689 {"signature", 0x32000, 0x00400},
690 {"firmware", 0x40000, 0x770000},
691 {"soft-version", 0x7b0000, 0x00100},
692 {"support-list", 0x7b1000, 0x00400},
693 {"user-config", 0x7c0000, 0x10000},
694 {"default-config", 0x7d0000, 0x10000},
695 {"log", 0x7e0000, 0x10000},
696 {"radio", 0x7f0000, 0x10000},
700 .first_sysupgrade_partition
= "os-image",
701 .last_sysupgrade_partition
= "support-list",
706 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
709 "WBS210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
710 "WBS210(TP-LINK|US|N300-2|55530000):2.0\r\n"
711 "WBS210(TP-LINK|EU|N300-2|45550000):2.0\r\n",
713 .soft_ver
= SOFT_VER_DEFAULT
,
716 {"fs-uboot", 0x00000, 0x20000},
717 {"partition-table", 0x20000, 0x02000},
718 {"default-mac", 0x30000, 0x00020},
719 {"product-info", 0x31100, 0x00100},
720 {"signature", 0x32000, 0x00400},
721 {"firmware", 0x40000, 0x770000},
722 {"soft-version", 0x7b0000, 0x00100},
723 {"support-list", 0x7b1000, 0x00400},
724 {"user-config", 0x7c0000, 0x10000},
725 {"default-config", 0x7d0000, 0x10000},
726 {"log", 0x7e0000, 0x10000},
727 {"radio", 0x7f0000, 0x10000},
731 .first_sysupgrade_partition
= "os-image",
732 .last_sysupgrade_partition
= "support-list",
737 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
740 "WBS510(TP-LINK|UN|N300-5):1.20\r\n"
741 "WBS510(TP-LINK|US|N300-5):1.20\r\n"
742 "WBS510(TP-LINK|EU|N300-5):1.20\r\n"
743 "WBS510(TP-LINK|CA|N300-5):1.20\r\n",
745 .soft_ver
= SOFT_VER_DEFAULT
,
748 {"fs-uboot", 0x00000, 0x20000},
749 {"partition-table", 0x20000, 0x02000},
750 {"default-mac", 0x30000, 0x00020},
751 {"product-info", 0x31100, 0x00100},
752 {"signature", 0x32000, 0x00400},
753 {"firmware", 0x40000, 0x770000},
754 {"soft-version", 0x7b0000, 0x00100},
755 {"support-list", 0x7b1000, 0x00400},
756 {"user-config", 0x7c0000, 0x10000},
757 {"default-config", 0x7d0000, 0x10000},
758 {"log", 0x7e0000, 0x10000},
759 {"radio", 0x7f0000, 0x10000},
763 .first_sysupgrade_partition
= "os-image",
764 .last_sysupgrade_partition
= "support-list",
769 .vendor
= "CPE510(TP-LINK|UN|N300-5):1.0\r\n",
772 "WBS510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
773 "WBS510(TP-LINK|US|N300-5|55530000):2.0\r\n"
774 "WBS510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
775 "WBS510(TP-LINK|CA|N300-5|43410000):2.0\r\n",
777 .soft_ver
= SOFT_VER_DEFAULT
,
780 {"fs-uboot", 0x00000, 0x20000},
781 {"partition-table", 0x20000, 0x02000},
782 {"default-mac", 0x30000, 0x00020},
783 {"product-info", 0x31100, 0x00100},
784 {"signature", 0x32000, 0x00400},
785 {"firmware", 0x40000, 0x770000},
786 {"soft-version", 0x7b0000, 0x00100},
787 {"support-list", 0x7b1000, 0x00400},
788 {"user-config", 0x7c0000, 0x10000},
789 {"default-config", 0x7d0000, 0x10000},
790 {"log", 0x7e0000, 0x10000},
791 {"radio", 0x7f0000, 0x10000},
795 .first_sysupgrade_partition
= "os-image",
796 .last_sysupgrade_partition
= "support-list",
799 /** Firmware layout for the AD7200 */
805 "{product_name:AD7200,product_ver:1.0.0,special_id:00000000}\r\n",
807 .soft_ver
= SOFT_VER_DEFAULT
,
810 {"SBL1", 0x00000, 0x20000},
811 {"MIBIB", 0x20000, 0x20000},
812 {"SBL2", 0x40000, 0x20000},
813 {"SBL3", 0x60000, 0x30000},
814 {"DDRCONFIG", 0x90000, 0x10000},
815 {"SSD", 0xa0000, 0x10000},
816 {"TZ", 0xb0000, 0x30000},
817 {"RPM", 0xe0000, 0x20000},
818 {"fs-uboot", 0x100000, 0x70000},
819 {"uboot-env", 0x170000, 0x40000},
820 {"radio", 0x1b0000, 0x40000},
821 {"os-image", 0x1f0000, 0x400000},
822 {"file-system", 0x5f0000, 0x1900000},
823 {"default-mac", 0x1ef0000, 0x00200},
824 {"pin", 0x1ef0200, 0x00200},
825 {"device-id", 0x1ef0400, 0x00200},
826 {"product-info", 0x1ef0600, 0x0fa00},
827 {"partition-table", 0x1f00000, 0x10000},
828 {"soft-version", 0x1f10000, 0x10000},
829 {"support-list", 0x1f20000, 0x10000},
830 {"profile", 0x1f30000, 0x10000},
831 {"default-config", 0x1f40000, 0x10000},
832 {"user-config", 0x1f50000, 0x40000},
833 {"qos-db", 0x1f90000, 0x40000},
834 {"usb-config", 0x1fd0000, 0x10000},
835 {"log", 0x1fe0000, 0x20000},
839 .first_sysupgrade_partition
= "os-image",
840 .last_sysupgrade_partition
= "file-system"
843 /** Firmware layout for the C2600 */
849 "{product_name:Archer C2600,product_ver:1.0.0,special_id:00000000}\r\n",
851 .soft_ver
= SOFT_VER_DEFAULT
,
854 We use a bigger os-image partition than the stock images (and thus
855 smaller file-system), as our kernel doesn't fit in the stock firmware's
856 2 MB os-image since kernel 4.14.
859 {"SBL1", 0x00000, 0x20000},
860 {"MIBIB", 0x20000, 0x20000},
861 {"SBL2", 0x40000, 0x20000},
862 {"SBL3", 0x60000, 0x30000},
863 {"DDRCONFIG", 0x90000, 0x10000},
864 {"SSD", 0xa0000, 0x10000},
865 {"TZ", 0xb0000, 0x30000},
866 {"RPM", 0xe0000, 0x20000},
867 {"fs-uboot", 0x100000, 0x70000},
868 {"uboot-env", 0x170000, 0x40000},
869 {"radio", 0x1b0000, 0x40000},
870 {"os-image", 0x1f0000, 0x400000}, /* Stock: base 0x1f0000 size 0x200000 */
871 {"file-system", 0x5f0000, 0x1900000}, /* Stock: base 0x3f0000 size 0x1b00000 */
872 {"default-mac", 0x1ef0000, 0x00200},
873 {"pin", 0x1ef0200, 0x00200},
874 {"product-info", 0x1ef0400, 0x0fc00},
875 {"partition-table", 0x1f00000, 0x10000},
876 {"soft-version", 0x1f10000, 0x10000},
877 {"support-list", 0x1f20000, 0x10000},
878 {"profile", 0x1f30000, 0x10000},
879 {"default-config", 0x1f40000, 0x10000},
880 {"user-config", 0x1f50000, 0x40000},
881 {"qos-db", 0x1f90000, 0x40000},
882 {"usb-config", 0x1fd0000, 0x10000},
883 {"log", 0x1fe0000, 0x20000},
887 .first_sysupgrade_partition
= "os-image",
888 .last_sysupgrade_partition
= "file-system"
891 /** Firmware layout for the A7-V5 */
893 .id
= "ARCHER-A7-V5",
896 "{product_name:Archer A7,product_ver:5.0.0,special_id:45550000}\n"
897 "{product_name:Archer A7,product_ver:5.0.0,special_id:55530000}\n"
898 "{product_name:Archer A7,product_ver:5.0.0,special_id:43410000}\n"
899 "{product_name:Archer A7,product_ver:5.0.0,special_id:4A500000}\n"
900 "{product_name:Archer A7,product_ver:5.0.0,special_id:54570000}\n"
901 "{product_name:Archer A7,product_ver:5.0.0,special_id:52550000}\n",
903 .soft_ver
= SOFT_VER_TEXT("soft_ver:7.0.0\n"),
905 /* We're using a dynamic kernel/rootfs split here */
907 {"factory-boot", 0x00000, 0x20000},
908 {"fs-uboot", 0x20000, 0x20000},
909 {"firmware", 0x40000, 0xec0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
910 /* Stock: name file-system base 0x160000 size 0xda0000 */
911 {"default-mac", 0xf40000, 0x00200},
912 {"pin", 0xf40200, 0x00200},
913 {"device-id", 0xf40400, 0x00100},
914 {"product-info", 0xf40500, 0x0fb00},
915 {"soft-version", 0xf50000, 0x00100},
916 {"extra-para", 0xf51000, 0x01000},
917 {"support-list", 0xf52000, 0x0a000},
918 {"profile", 0xf5c000, 0x04000},
919 {"default-config", 0xf60000, 0x10000},
920 {"user-config", 0xf70000, 0x40000},
921 {"certificate", 0xfb0000, 0x10000},
922 {"partition-table", 0xfc0000, 0x10000},
923 {"log", 0xfd0000, 0x20000},
924 {"radio", 0xff0000, 0x10000},
928 .first_sysupgrade_partition
= "os-image",
929 .last_sysupgrade_partition
= "file-system",
932 /** Firmware layout for the Archer A9 v6 */
934 .id
= "ARCHER-A9-V6",
937 "{product_name:Archer A9,product_ver:6.0,special_id:55530000}\n"
938 "{product_name:Archer A9,product_ver:6.0,special_id:45550000}\n"
939 "{product_name:Archer A9,product_ver:6.0,special_id:52550000}\n"
940 "{product_name:Archer A9,product_ver:6.0,special_id:4A500000}\n"
941 "{product_name:Archer C90,product_ver:6.0,special_id:55530000}\n",
943 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.1.0\n"),
945 /* We're using a dynamic kernel/rootfs split here */
947 {"factory-boot", 0x00000, 0x20000},
948 {"fs-uboot", 0x20000, 0x20000},
949 {"partition-table", 0x40000, 0x10000},
950 {"radio", 0x50000, 0x10000},
951 {"default-mac", 0x60000, 0x00200},
952 {"pin", 0x60200, 0x00200},
953 {"device-id", 0x60400, 0x00100},
954 {"product-info", 0x60500, 0x0fb00},
955 {"soft-version", 0x70000, 0x01000},
956 {"extra-para", 0x71000, 0x01000},
957 {"support-list", 0x72000, 0x0a000},
958 {"profile", 0x7c000, 0x04000},
959 {"user-config", 0x80000, 0x10000},
960 {"ap-config", 0x90000, 0x10000},
961 {"apdef-config", 0xa0000, 0x10000},
962 {"router-config", 0xb0000, 0x10000},
963 {"firmware", 0xc0000, 0xf00000}, /* Stock: name os-image base 0xc0000 size 0x120000 */
964 /* Stock: name file-system base 0x1e0000 size 0xde0000 */
965 {"log", 0xfc0000, 0x20000},
966 {"certificate", 0xfe0000, 0x10000},
967 {"default-config", 0xff0000, 0x10000},
971 .first_sysupgrade_partition
= "os-image",
972 .last_sysupgrade_partition
= "file-system",
975 /** Firmware layout for the Archer AX23 v1 */
977 .id
= "ARCHER-AX23-V1",
981 "{product_name:Archer AX23,product_ver:1.0,special_id:45550000}\n"
982 "{product_name:Archer AX23,product_ver:1.0,special_id:4A500000}\n"
983 "{product_name:Archer AX23,product_ver:1.0,special_id:4B520000}\n"
984 "{product_name:Archer AX23,product_ver:1.0,special_id:52550000}\n"
985 "{product_name:Archer AX23,product_ver:1.0.0,special_id:43410000}\n"
986 "{product_name:Archer AX23,product_ver:1.0.0,special_id:54570000}\n"
987 "{product_name:Archer AX23,product_ver:1.0.0,special_id:55530000}\n"
988 "{product_name:Archer AX23,product_ver:1.20,special_id:45550000}\n"
989 "{product_name:Archer AX23,product_ver:1.20,special_id:4A500000}\n"
990 "{product_name:Archer AX23,product_ver:1.20,special_id:52550000}\n"
991 "{product_name:Archer AX23,product_ver:1.20,special_id:55530000}\n"
992 "{product_name:Archer AX1800,product_ver:1.20,special_id:45550000}\n"
993 "{product_name:Archer AX1800,product_ver:1.20,special_id:52550000}\n",
995 .soft_ver
= SOFT_VER_TEXT("soft_ver:3.0.3\n"),
998 {"fs-uboot", 0x00000, 0x40000},
999 {"firmware", 0x40000, 0xf60000},
1000 {"default-mac", 0xfa0000, 0x00200},
1001 {"pin", 0xfa0200, 0x00100},
1002 {"device-id", 0xfa0300, 0x00100},
1003 {"product-info", 0xfa0400, 0x0fc00},
1004 {"default-config", 0xfb0000, 0x08000},
1005 {"ap-def-config", 0xfb8000, 0x08000},
1006 {"user-config", 0xfc0000, 0x0a000},
1007 {"ag-config", 0xfca000, 0x04000},
1008 {"certificate", 0xfce000, 0x02000},
1009 {"ap-config", 0xfd0000, 0x06000},
1010 {"router-config", 0xfd6000, 0x06000},
1011 {"favicon", 0xfdc000, 0x02000},
1012 {"logo", 0xfde000, 0x02000},
1013 {"partition-table", 0xfe0000, 0x00800},
1014 {"soft-version", 0xfe0800, 0x00100},
1015 {"support-list", 0xfe0900, 0x00400},
1016 {"profile", 0xfe0d00, 0x03000},
1017 {"extra-para", 0xfe3d00, 0x00100},
1018 {"radio", 0xff0000, 0x10000},
1021 .first_sysupgrade_partition
= "os-image",
1022 .last_sysupgrade_partition
= "file-system",
1024 /** Firmware layout for the C2v3 */
1026 .id
= "ARCHER-C2-V3",
1029 "{product_name:ArcherC2,product_ver:3.0.0,special_id:00000000}\n"
1030 "{product_name:ArcherC2,product_ver:3.0.0,special_id:55530000}\n"
1031 "{product_name:ArcherC2,product_ver:3.0.0,special_id:45550000}\n",
1033 .soft_ver
= SOFT_VER_TEXT("soft_ver:3.0.1\n"),
1035 /** We're using a dynamic kernel/rootfs split here */
1038 {"factory-boot", 0x00000, 0x20000},
1039 {"fs-uboot", 0x20000, 0x10000},
1040 {"firmware", 0x30000, 0x7a0000},
1041 {"user-config", 0x7d0000, 0x04000},
1042 {"default-mac", 0x7e0000, 0x00100},
1043 {"device-id", 0x7e0100, 0x00100},
1044 {"extra-para", 0x7e0200, 0x00100},
1045 {"pin", 0x7e0300, 0x00100},
1046 {"support-list", 0x7e0400, 0x00400},
1047 {"soft-version", 0x7e0800, 0x00400},
1048 {"product-info", 0x7e0c00, 0x01400},
1049 {"partition-table", 0x7e2000, 0x01000},
1050 {"profile", 0x7e3000, 0x01000},
1051 {"default-config", 0x7e4000, 0x04000},
1052 {"merge-config", 0x7ec000, 0x02000},
1053 {"qos-db", 0x7ee000, 0x02000},
1054 {"radio", 0x7f0000, 0x10000},
1058 .first_sysupgrade_partition
= "os-image",
1059 .last_sysupgrade_partition
= "file-system",
1062 /** Firmware layout for the C25v1 */
1064 .id
= "ARCHER-C25-V1",
1067 "{product_name:ArcherC25,product_ver:1.0.0,special_id:00000000}\n"
1068 "{product_name:ArcherC25,product_ver:1.0.0,special_id:55530000}\n"
1069 "{product_name:ArcherC25,product_ver:1.0.0,special_id:45550000}\n",
1071 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.0.0\n"),
1073 /* We're using a dynamic kernel/rootfs split here */
1075 {"factory-boot", 0x00000, 0x20000},
1076 {"fs-uboot", 0x20000, 0x10000},
1077 {"firmware", 0x30000, 0x7a0000}, /* Stock: name os-image base 0x30000 size 0x100000 */
1078 /* Stock: name file-system base 0x130000 size 0x6a0000 */
1079 {"user-config", 0x7d0000, 0x04000},
1080 {"default-mac", 0x7e0000, 0x00100},
1081 {"device-id", 0x7e0100, 0x00100},
1082 {"extra-para", 0x7e0200, 0x00100},
1083 {"pin", 0x7e0300, 0x00100},
1084 {"support-list", 0x7e0400, 0x00400},
1085 {"soft-version", 0x7e0800, 0x00400},
1086 {"product-info", 0x7e0c00, 0x01400},
1087 {"partition-table", 0x7e2000, 0x01000},
1088 {"profile", 0x7e3000, 0x01000},
1089 {"default-config", 0x7e4000, 0x04000},
1090 {"merge-config", 0x7ec000, 0x02000},
1091 {"qos-db", 0x7ee000, 0x02000},
1092 {"radio", 0x7f0000, 0x10000},
1096 .first_sysupgrade_partition
= "os-image",
1097 .last_sysupgrade_partition
= "file-system",
1100 /** Firmware layout for the C58v1 */
1102 .id
= "ARCHER-C58-V1",
1106 "{product_name:Archer C58,product_ver:1.0.0,special_id:00000000}\r\n"
1107 "{product_name:Archer C58,product_ver:1.0.0,special_id:45550000}\r\n"
1108 "{product_name:Archer C58,product_ver:1.0.0,special_id:55530000}\r\n",
1110 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.0.0\n"),
1113 {"fs-uboot", 0x00000, 0x10000},
1114 {"default-mac", 0x10000, 0x00200},
1115 {"pin", 0x10200, 0x00200},
1116 {"product-info", 0x10400, 0x00100},
1117 {"partition-table", 0x10500, 0x00800},
1118 {"soft-version", 0x11300, 0x00200},
1119 {"support-list", 0x11500, 0x00100},
1120 {"device-id", 0x11600, 0x00100},
1121 {"profile", 0x11700, 0x03900},
1122 {"default-config", 0x15000, 0x04000},
1123 {"user-config", 0x19000, 0x04000},
1124 {"firmware", 0x20000, 0x7c8000},
1125 {"certyficate", 0x7e8000, 0x08000},
1126 {"radio", 0x7f0000, 0x10000},
1130 .first_sysupgrade_partition
= "os-image",
1131 .last_sysupgrade_partition
= "file-system",
1134 /** Firmware layout for the C59v1 */
1136 .id
= "ARCHER-C59-V1",
1140 "{product_name:Archer C59,product_ver:1.0.0,special_id:00000000}\r\n"
1141 "{product_name:Archer C59,product_ver:1.0.0,special_id:43410000}\r\n"
1142 "{product_name:Archer C59,product_ver:1.0.0,special_id:45550000}\r\n"
1143 "{product_name:Archer C59,product_ver:1.0.0,special_id:52550000}\r\n"
1144 "{product_name:Archer C59,product_ver:1.0.0,special_id:55530000}\r\n",
1146 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.0.0\n"),
1148 /* We're using a dynamic kernel/rootfs split here */
1150 {"fs-uboot", 0x00000, 0x10000},
1151 {"default-mac", 0x10000, 0x00200},
1152 {"pin", 0x10200, 0x00200},
1153 {"device-id", 0x10400, 0x00100},
1154 {"product-info", 0x10500, 0x0fb00},
1155 {"firmware", 0x20000, 0xe30000},
1156 {"partition-table", 0xe50000, 0x10000},
1157 {"soft-version", 0xe60000, 0x10000},
1158 {"support-list", 0xe70000, 0x10000},
1159 {"profile", 0xe80000, 0x10000},
1160 {"default-config", 0xe90000, 0x10000},
1161 {"user-config", 0xea0000, 0x40000},
1162 {"usb-config", 0xee0000, 0x10000},
1163 {"certificate", 0xef0000, 0x10000},
1164 {"qos-db", 0xf00000, 0x40000},
1165 {"log", 0xfe0000, 0x10000},
1166 {"radio", 0xff0000, 0x10000},
1170 .first_sysupgrade_partition
= "os-image",
1171 .last_sysupgrade_partition
= "file-system",
1174 /** Firmware layout for the C59v2 */
1176 .id
= "ARCHER-C59-V2",
1180 "{product_name:Archer C59,product_ver:2.0.0,special_id:00000000}\r\n"
1181 "{product_name:Archer C59,product_ver:2.0.0,special_id:43410000}\r\n"
1182 "{product_name:Archer C59,product_ver:2.0.0,special_id:45550000}\r\n"
1183 "{product_name:Archer C59,product_ver:2.0.0,special_id:55530000}\r\n",
1185 .soft_ver
= SOFT_VER_TEXT("soft_ver:2.0.0 Build 20161206 rel.7303\n"),
1187 /** We're using a dynamic kernel/rootfs split here */
1189 {"factory-boot", 0x00000, 0x20000},
1190 {"fs-uboot", 0x20000, 0x10000},
1191 {"default-mac", 0x30000, 0x00200},
1192 {"pin", 0x30200, 0x00200},
1193 {"device-id", 0x30400, 0x00100},
1194 {"product-info", 0x30500, 0x0fb00},
1195 {"firmware", 0x40000, 0xe10000},
1196 {"partition-table", 0xe50000, 0x10000},
1197 {"soft-version", 0xe60000, 0x10000},
1198 {"support-list", 0xe70000, 0x10000},
1199 {"profile", 0xe80000, 0x10000},
1200 {"default-config", 0xe90000, 0x10000},
1201 {"user-config", 0xea0000, 0x40000},
1202 {"usb-config", 0xee0000, 0x10000},
1203 {"certificate", 0xef0000, 0x10000},
1204 {"extra-para", 0xf00000, 0x10000},
1205 {"qos-db", 0xf10000, 0x30000},
1206 {"log", 0xfe0000, 0x10000},
1207 {"radio", 0xff0000, 0x10000},
1211 .first_sysupgrade_partition
= "os-image",
1212 .last_sysupgrade_partition
= "file-system",
1215 /** Firmware layout for the Archer C6 v2 (EU/RU/JP) */
1217 .id
= "ARCHER-C6-V2",
1221 "{product_name:Archer A6,product_ver:2.0.0,special_id:45550000}\r\n"
1222 "{product_name:Archer A6,product_ver:2.0.0,special_id:52550000}\r\n"
1223 "{product_name:Archer C6,product_ver:2.0.0,special_id:45550000}\r\n"
1224 "{product_name:Archer C6,product_ver:2.0.0,special_id:52550000}\r\n"
1225 "{product_name:Archer C6,product_ver:2.0.0,special_id:4A500000}\r\n",
1227 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.9.1\n"),
1230 {"fs-uboot", 0x00000, 0x20000},
1231 {"default-mac", 0x20000, 0x00200},
1232 {"pin", 0x20200, 0x00100},
1233 {"product-info", 0x20300, 0x00200},
1234 {"device-id", 0x20500, 0x0fb00},
1235 {"firmware", 0x30000, 0x7a9400},
1236 {"soft-version", 0x7d9400, 0x00100},
1237 {"extra-para", 0x7d9500, 0x00100},
1238 {"support-list", 0x7d9600, 0x00200},
1239 {"profile", 0x7d9800, 0x03000},
1240 {"default-config", 0x7dc800, 0x03000},
1241 {"partition-table", 0x7df800, 0x00800},
1242 {"user-config", 0x7e0000, 0x0c000},
1243 {"certificate", 0x7ec000, 0x04000},
1244 {"radio", 0x7f0000, 0x10000},
1248 .first_sysupgrade_partition
= "os-image",
1249 .last_sysupgrade_partition
= "file-system",
1252 /** Firmware layout for the Archer C6 v2 (US) and A6 v2 (US/TW) */
1254 .id
= "ARCHER-C6-V2-US",
1258 "{product_name:Archer A6,product_ver:2.0.0,special_id:55530000}\n"
1259 "{product_name:Archer A6,product_ver:2.0.0,special_id:54570000}\n"
1260 "{product_name:Archer C6,product_ver:2.0.0,special_id:55530000}\n",
1262 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.9.1\n"),
1265 {"factory-boot", 0x00000, 0x20000},
1266 {"default-mac", 0x20000, 0x00200},
1267 {"pin", 0x20200, 0x00100},
1268 {"product-info", 0x20300, 0x00200},
1269 {"device-id", 0x20500, 0x0fb00},
1270 {"fs-uboot", 0x30000, 0x20000},
1271 {"firmware", 0x50000, 0xf89400},
1272 {"soft-version", 0xfd9400, 0x00100},
1273 {"extra-para", 0xfd9500, 0x00100},
1274 {"support-list", 0xfd9600, 0x00200},
1275 {"profile", 0xfd9800, 0x03000},
1276 {"default-config", 0xfdc800, 0x03000},
1277 {"partition-table", 0xfdf800, 0x00800},
1278 {"user-config", 0xfe0000, 0x0c000},
1279 {"certificate", 0xfec000, 0x04000},
1280 {"radio", 0xff0000, 0x10000},
1283 .first_sysupgrade_partition
= "os-image",
1284 .last_sysupgrade_partition
= "file-system",
1286 /** Firmware layout for the Archer C6 v3 */
1288 .id
= "ARCHER-C6-V3",
1292 "{product_name:Archer C6,product_ver:3.20,special_id:55530000}"
1293 "{product_name:Archer C6,product_ver:3.20,special_id:45550000}"
1294 "{product_name:Archer C6,product_ver:3.20,special_id:52550000}"
1295 "{product_name:Archer C6,product_ver:3.20,special_id:4A500000}"
1296 "{product_name:Archer C6,product_ver:3.20,special_id:4B520000}"
1297 "{product_name:Archer C6,product_ver:3.0.0,special_id:42520000}",
1299 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.0.9\n"),
1302 {"fs-uboot", 0x00000, 0x40000},
1303 {"firmware", 0x40000, 0xf60000},
1304 {"default-mac", 0xfa0000, 0x00200},
1305 {"pin", 0xfa0200, 0x00100},
1306 {"device-id", 0xfa0300, 0x00100},
1307 {"product-info", 0xfa0400, 0x0fc00},
1308 {"default-config", 0xfb0000, 0x08000},
1309 {"ap-def-config", 0xfb8000, 0x08000},
1310 {"user-config", 0xfc0000, 0x0a000},
1311 {"ag-config", 0xfca000, 0x04000},
1312 {"certificate", 0xfce000, 0x02000},
1313 {"ap-config", 0xfd0000, 0x06000},
1314 {"router-config", 0xfd6000, 0x06000},
1315 {"favicon", 0xfdc000, 0x02000},
1316 {"logo", 0xfde000, 0x02000},
1317 {"partition-table", 0xfe0000, 0x00800},
1318 {"soft-version", 0xfe0800, 0x00100},
1319 {"support-list", 0xfe0900, 0x00200},
1320 {"profile", 0xfe0b00, 0x03000},
1321 {"extra-para", 0xfe3b00, 0x00100},
1322 {"radio", 0xff0000, 0x10000},
1325 .first_sysupgrade_partition
= "os-image",
1326 .last_sysupgrade_partition
= "file-system",
1328 /** Firmware layout for the Archer A6 v3 */
1330 .id
= "ARCHER-A6-V3",
1334 "{product_name:Archer A6,product_ver:3.0.0,special_id:43410000}\n"
1335 "{product_name:Archer A6,product_ver:3.0.0,special_id:55530000}\n"
1336 "{product_name:Archer A6,product_ver:3.0.0,special_id:54570000}\n"
1337 "{product_name:Archer A6,product_ver:3.0.0,special_id:4A500000}\n"
1338 "{product_name:Archer A6,product_ver:3.20,special_id:45550000}\n"
1339 "{product_name:Archer A6,product_ver:3.20,special_id:52550000}\n",
1341 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.0.5\n"),
1344 {"fs-uboot", 0x00000, 0x40000},
1345 {"firmware", 0x40000, 0xf60000},
1346 {"default-mac", 0xfa0000, 0x00200},
1347 {"pin", 0xfa0200, 0x00100},
1348 {"device-id", 0xfa0300, 0x00100},
1349 {"product-info", 0xfa0400, 0x0fc00},
1350 {"default-config", 0xfb0000, 0x08000},
1351 {"ap-def-config", 0xfb8000, 0x08000},
1352 {"user-config", 0xfc0000, 0x0a000},
1353 {"ag-config", 0xfca000, 0x04000},
1354 {"certificate", 0xfce000, 0x02000},
1355 {"ap-config", 0xfd0000, 0x06000},
1356 {"router-config", 0xfd6000, 0x06000},
1357 {"favicon", 0xfdc000, 0x02000},
1358 {"logo", 0xfde000, 0x02000},
1359 {"partition-table", 0xfe0000, 0x00800},
1360 {"soft-version", 0xfe0800, 0x00100},
1361 {"support-list", 0xfe0900, 0x00200},
1362 {"profile", 0xfe0b00, 0x03000},
1363 {"extra-para", 0xfe3b00, 0x00100},
1364 {"radio", 0xff0000, 0x10000},
1367 .first_sysupgrade_partition
= "os-image",
1368 .last_sysupgrade_partition
= "file-system",
1370 /** Firmware layout for the Archer C6U v1 */
1372 .id
= "ARCHER-C6U-V1",
1376 "{product_name:Archer C6U,product_ver:1.0.0,special_id:45550000}\n"
1377 "{product_name:Archer C6U,product_ver:1.0.0,special_id:52550000}\n",
1379 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.0.2\n"),
1382 {"fs-uboot", 0x00000, 0x40000},
1383 {"firmware", 0x40000, 0xf60000},
1384 {"default-mac", 0xfa0000, 0x00200},
1385 {"pin", 0xfa0200, 0x00100},
1386 {"device-id", 0xfa0300, 0x00100},
1387 {"product-info", 0xfa0400, 0x0fc00},
1388 {"default-config", 0xfb0000, 0x08000},
1389 {"ap-def-config", 0xfb8000, 0x08000},
1390 {"user-config", 0xfc0000, 0x0c000},
1391 {"certificate", 0xfcc000, 0x04000},
1392 {"ap-config", 0xfd0000, 0x08000},
1393 {"router-config", 0xfd8000, 0x08000},
1394 {"partition-table", 0xfe0000, 0x00800},
1395 {"soft-version", 0xfe0800, 0x00100},
1396 {"support-list", 0xfe0900, 0x00200},
1397 {"profile", 0xfe0b00, 0x03000},
1398 {"extra-para", 0xfe3b00, 0x00100},
1399 {"radio", 0xff0000, 0x10000},
1402 .first_sysupgrade_partition
= "os-image",
1403 .last_sysupgrade_partition
= "file-system",
1405 /** Firmware layout for the C60v1 */
1407 .id
= "ARCHER-C60-V1",
1411 "{product_name:Archer C60,product_ver:1.0.0,special_id:00000000}\r\n"
1412 "{product_name:Archer C60,product_ver:1.0.0,special_id:43410000}\r\n"
1413 "{product_name:Archer C60,product_ver:1.0.0,special_id:45550000}\r\n"
1414 "{product_name:Archer C60,product_ver:1.0.0,special_id:55530000}\r\n",
1416 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.0.0\n"),
1419 {"fs-uboot", 0x00000, 0x10000},
1420 {"default-mac", 0x10000, 0x00200},
1421 {"pin", 0x10200, 0x00200},
1422 {"product-info", 0x10400, 0x00100},
1423 {"partition-table", 0x10500, 0x00800},
1424 {"soft-version", 0x11300, 0x00200},
1425 {"support-list", 0x11500, 0x00100},
1426 {"device-id", 0x11600, 0x00100},
1427 {"profile", 0x11700, 0x03900},
1428 {"default-config", 0x15000, 0x04000},
1429 {"user-config", 0x19000, 0x04000},
1430 {"firmware", 0x20000, 0x7c8000},
1431 {"certyficate", 0x7e8000, 0x08000},
1432 {"radio", 0x7f0000, 0x10000},
1436 .first_sysupgrade_partition
= "os-image",
1437 .last_sysupgrade_partition
= "file-system",
1440 /** Firmware layout for the C60v2 */
1442 .id
= "ARCHER-C60-V2",
1446 "{product_name:Archer C60,product_ver:2.0.0,special_id:42520000}\r\n"
1447 "{product_name:Archer C60,product_ver:2.0.0,special_id:43410000}\r\n"
1448 "{product_name:Archer C60,product_ver:2.0.0,special_id:45550000}\r\n"
1449 "{product_name:Archer C60,product_ver:2.0.0,special_id:55530000}\r\n",
1451 .soft_ver
= SOFT_VER_TEXT("soft_ver:2.0.0\n"),
1454 {"factory-boot", 0x00000, 0x1fb00},
1455 {"default-mac", 0x1fb00, 0x00200},
1456 {"pin", 0x1fd00, 0x00100},
1457 {"product-info", 0x1fe00, 0x00100},
1458 {"device-id", 0x1ff00, 0x00100},
1459 {"fs-uboot", 0x20000, 0x10000},
1460 {"firmware", 0x30000, 0x7a0000},
1461 {"soft-version", 0x7d9500, 0x00100},
1462 {"support-list", 0x7d9600, 0x00100},
1463 {"extra-para", 0x7d9700, 0x00100},
1464 {"profile", 0x7d9800, 0x03000},
1465 {"default-config", 0x7dc800, 0x03000},
1466 {"partition-table", 0x7df800, 0x00800},
1467 {"user-config", 0x7e0000, 0x0c000},
1468 {"certificate", 0x7ec000, 0x04000},
1469 {"radio", 0x7f0000, 0x10000},
1473 .first_sysupgrade_partition
= "os-image",
1474 .last_sysupgrade_partition
= "file-system",
1477 /** Firmware layout for the C60v3 */
1479 .id
= "ARCHER-C60-V3",
1483 "{product_name:Archer C60,product_ver:3.0.0,special_id:42520000}\r\n"
1484 "{product_name:Archer C60,product_ver:3.0.0,special_id:43410000}\r\n"
1485 "{product_name:Archer C60,product_ver:3.0.0,special_id:45550000}\r\n"
1486 "{product_name:Archer C60,product_ver:3.0.0,special_id:55530000}\r\n",
1488 .soft_ver
= SOFT_VER_TEXT("soft_ver:3.0.0\n"),
1491 {"factory-boot", 0x00000, 0x1fb00},
1492 {"default-mac", 0x1fb00, 0x00200},
1493 {"pin", 0x1fd00, 0x00100},
1494 {"product-info", 0x1fe00, 0x00100},
1495 {"device-id", 0x1ff00, 0x00100},
1496 {"fs-uboot", 0x20000, 0x10000},
1497 {"firmware", 0x30000, 0x7a0000},
1498 {"soft-version", 0x7d9500, 0x00100},
1499 {"support-list", 0x7d9600, 0x00100},
1500 {"extra-para", 0x7d9700, 0x00100},
1501 {"profile", 0x7d9800, 0x03000},
1502 {"default-config", 0x7dc800, 0x03000},
1503 {"partition-table", 0x7df800, 0x00800},
1504 {"user-config", 0x7e0000, 0x0c000},
1505 {"certificate", 0x7ec000, 0x04000},
1506 {"radio", 0x7f0000, 0x10000},
1510 .first_sysupgrade_partition
= "os-image",
1511 .last_sysupgrade_partition
= "file-system",
1514 /** Firmware layout for the C5 */
1516 .id
= "ARCHER-C5-V2",
1520 "{product_name:ArcherC5,product_ver:2.0.0,special_id:00000000}\r\n"
1521 "{product_name:ArcherC5,product_ver:2.0.0,special_id:55530000}\r\n"
1522 "{product_name:ArcherC5,product_ver:2.0.0,special_id:4A500000}\r\n", /* JP version */
1524 .soft_ver
= SOFT_VER_DEFAULT
,
1527 {"fs-uboot", 0x00000, 0x40000},
1528 {"os-image", 0x40000, 0x200000},
1529 {"file-system", 0x240000, 0xc00000},
1530 {"default-mac", 0xe40000, 0x00200},
1531 {"pin", 0xe40200, 0x00200},
1532 {"product-info", 0xe40400, 0x00200},
1533 {"partition-table", 0xe50000, 0x10000},
1534 {"soft-version", 0xe60000, 0x00200},
1535 {"support-list", 0xe61000, 0x0f000},
1536 {"profile", 0xe70000, 0x10000},
1537 {"default-config", 0xe80000, 0x10000},
1538 {"user-config", 0xe90000, 0x50000},
1539 {"log", 0xee0000, 0x100000},
1540 {"radio_bk", 0xfe0000, 0x10000},
1541 {"radio", 0xff0000, 0x10000},
1545 .first_sysupgrade_partition
= "os-image",
1546 .last_sysupgrade_partition
= "file-system"
1549 /** Firmware layout for the C7 */
1551 .id
= "ARCHER-C7-V4",
1554 "{product_name:Archer C7,product_ver:4.0.0,special_id:00000000}\n"
1555 "{product_name:Archer C7,product_ver:4.0.0,special_id:41550000}\n"
1556 "{product_name:Archer C7,product_ver:4.0.0,special_id:45550000}\n"
1557 "{product_name:Archer C7,product_ver:4.0.0,special_id:4B520000}\n"
1558 "{product_name:Archer C7,product_ver:4.0.0,special_id:42520000}\n"
1559 "{product_name:Archer C7,product_ver:4.0.0,special_id:4A500000}\n"
1560 "{product_name:Archer C7,product_ver:4.0.0,special_id:52550000}\n"
1561 "{product_name:Archer C7,product_ver:4.0.0,special_id:54570000}\n"
1562 "{product_name:Archer C7,product_ver:4.0.0,special_id:55530000}\n"
1563 "{product_name:Archer C7,product_ver:4.0.0,special_id:43410000}\n",
1565 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.0.0\n"),
1567 /* We're using a dynamic kernel/rootfs split here */
1569 {"factory-boot", 0x00000, 0x20000},
1570 {"fs-uboot", 0x20000, 0x20000},
1571 {"firmware", 0x40000, 0xEC0000}, /* Stock: name os-image base 0x40000 size 0x120000 */
1572 /* Stock: name file-system base 0x160000 size 0xda0000 */
1573 {"default-mac", 0xf00000, 0x00200},
1574 {"pin", 0xf00200, 0x00200},
1575 {"device-id", 0xf00400, 0x00100},
1576 {"product-info", 0xf00500, 0x0fb00},
1577 {"soft-version", 0xf10000, 0x00100},
1578 {"extra-para", 0xf11000, 0x01000},
1579 {"support-list", 0xf12000, 0x0a000},
1580 {"profile", 0xf1c000, 0x04000},
1581 {"default-config", 0xf20000, 0x10000},
1582 {"user-config", 0xf30000, 0x40000},
1583 {"qos-db", 0xf70000, 0x40000},
1584 {"certificate", 0xfb0000, 0x10000},
1585 {"partition-table", 0xfc0000, 0x10000},
1586 {"log", 0xfd0000, 0x20000},
1587 {"radio", 0xff0000, 0x10000},
1591 .first_sysupgrade_partition
= "os-image",
1592 .last_sysupgrade_partition
= "file-system",
1595 /** Firmware layout for the C7 v5*/
1597 .id
= "ARCHER-C7-V5",
1600 "{product_name:Archer C7,product_ver:5.0.0,special_id:00000000}\n"
1601 "{product_name:Archer C7,product_ver:5.0.0,special_id:45550000}\n"
1602 "{product_name:Archer C7,product_ver:5.0.0,special_id:55530000}\n"
1603 "{product_name:Archer C7,product_ver:5.0.0,special_id:43410000}\n"
1604 "{product_name:Archer C7,product_ver:5.0.0,special_id:4A500000}\n"
1605 "{product_name:Archer C7,product_ver:5.0.0,special_id:54570000}\n"
1606 "{product_name:Archer C7,product_ver:5.0.0,special_id:52550000}\n"
1607 "{product_name:Archer C7,product_ver:5.0.0,special_id:4B520000}\n",
1610 .soft_ver
= SOFT_VER_TEXT("soft_ver:7.0.0\n"),
1612 /* We're using a dynamic kernel/rootfs split here */
1614 {"factory-boot", 0x00000, 0x20000},
1615 {"fs-uboot", 0x20000, 0x20000},
1616 {"partition-table", 0x40000, 0x10000},
1617 {"radio", 0x50000, 0x10000},
1618 {"default-mac", 0x60000, 0x00200},
1619 {"pin", 0x60200, 0x00200},
1620 {"device-id", 0x60400, 0x00100},
1621 {"product-info", 0x60500, 0x0fb00},
1622 {"soft-version", 0x70000, 0x01000},
1623 {"extra-para", 0x71000, 0x01000},
1624 {"support-list", 0x72000, 0x0a000},
1625 {"profile", 0x7c000, 0x04000},
1626 {"user-config", 0x80000, 0x40000},
1629 {"firmware", 0xc0000, 0xf00000}, /* Stock: name os-image base 0xc0000 size 0x120000 */
1630 /* Stock: name file-system base 0x1e0000 size 0xde0000 */
1632 {"log", 0xfc0000, 0x20000},
1633 {"certificate", 0xfe0000, 0x10000},
1634 {"default-config", 0xff0000, 0x10000},
1639 .first_sysupgrade_partition
= "os-image",
1640 .last_sysupgrade_partition
= "file-system",
1643 /** Firmware layout for the C9 */
1649 "{product_name:ArcherC9,"
1650 "product_ver:1.0.0,"
1651 "special_id:00000000}\n",
1653 .soft_ver
= SOFT_VER_DEFAULT
,
1656 {"fs-uboot", 0x00000, 0x40000},
1657 {"os-image", 0x40000, 0x200000},
1658 {"file-system", 0x240000, 0xc00000},
1659 {"default-mac", 0xe40000, 0x00200},
1660 {"pin", 0xe40200, 0x00200},
1661 {"product-info", 0xe40400, 0x00200},
1662 {"partition-table", 0xe50000, 0x10000},
1663 {"soft-version", 0xe60000, 0x00200},
1664 {"support-list", 0xe61000, 0x0f000},
1665 {"profile", 0xe70000, 0x10000},
1666 {"default-config", 0xe80000, 0x10000},
1667 {"user-config", 0xe90000, 0x50000},
1668 {"log", 0xee0000, 0x100000},
1669 {"radio_bk", 0xfe0000, 0x10000},
1670 {"radio", 0xff0000, 0x10000},
1674 .first_sysupgrade_partition
= "os-image",
1675 .last_sysupgrade_partition
= "file-system"
1678 /** Firmware layout for the Deco M4R v1 and v2 */
1680 .id
= "DECO-M4R-V1",
1684 "{product_name:M4R,product_ver:1.0.0,special_id:55530000}\n"
1685 "{product_name:M4R,product_ver:1.0.0,special_id:45550000}\n"
1686 "{product_name:M4R,product_ver:1.0.0,special_id:43410000}\n"
1687 "{product_name:M4R,product_ver:1.0.0,special_id:4A500000}\n"
1688 "{product_name:M4R,product_ver:1.0.0,special_id:41550000}\n"
1689 "{product_name:M4R,product_ver:1.0.0,special_id:4B520000}\n"
1690 "{product_name:M4R,product_ver:1.0.0,special_id:49440000}\n"
1691 "{product_name:M4R,product_ver:2.0.0,special_id:55530000}\n"
1692 "{product_name:M4R,product_ver:2.0.0,special_id:45550000}\n"
1693 "{product_name:M4R,product_ver:2.0.0,special_id:43410000}\n"
1694 "{product_name:M4R,product_ver:2.0.0,special_id:4A500000}\n"
1695 "{product_name:M4R,product_ver:2.0.0,special_id:41550000}\n"
1696 "{product_name:M4R,product_ver:2.0.0,special_id:4B520000}\n"
1697 "{product_name:M4R,product_ver:2.0.0,special_id:54570000}\n"
1698 "{product_name:M4R,product_ver:2.0.0,special_id:42340000}\n"
1699 "{product_name:M4R,product_ver:2.0.0,special_id:49440000}\n",
1701 .soft_ver
= SOFT_VER_DEFAULT
,
1704 {"fs-uboot", 0x00000, 0x80000},
1705 {"firmware", 0x80000, 0xe00000},
1706 {"product-info", 0xe80000, 0x05000},
1707 {"default-mac", 0xe85000, 0x01000},
1708 {"device-id", 0xe86000, 0x01000},
1709 {"support-list", 0xe87000, 0x10000},
1710 {"user-config", 0xea7000, 0x10000},
1711 {"device-config", 0xeb7000, 0x10000},
1712 {"group-info", 0xec7000, 0x10000},
1713 {"partition-table", 0xed7000, 0x02000},
1714 {"soft-version", 0xed9000, 0x10000},
1715 {"profile", 0xee9000, 0x10000},
1716 {"default-config", 0xef9000, 0x10000},
1717 {"url-sig", 0xfe0000, 0x10000},
1718 {"radio", 0xff0000, 0x10000},
1721 .first_sysupgrade_partition
= "os-image",
1722 .last_sysupgrade_partition
= "file-system",
1725 /** Firmware layout for the Deco M4R v4 */
1727 .id
= "DECO-M4R-V4",
1731 "{product_name:M4R,product_ver:4.0.0,special_id:55530000}\n"
1732 "{product_name:M4R,product_ver:4.0.0,special_id:45550000}\n"
1733 "{product_name:M4R,product_ver:4.0.0,special_id:4A500000}\n"
1734 "{product_name:M4R,product_ver:4.0.0,special_id:42340000}\n"
1735 "{product_name:M4R,product_ver:4.0.0,special_id:5A470000}\n",
1737 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.0.0\n"),
1740 {"fs-uboot", 0x00000, 0x40000},
1741 {"firmware", 0x40000, 0xf60000},
1742 {"default-mac", 0xfa0000, 0x00300},
1743 {"device-id", 0xfa0300, 0x00100},
1744 {"product-info", 0xfa0400, 0x0fc00},
1745 {"group-info", 0xfb0000, 0x04000},
1746 {"user-config", 0xfb4000, 0x0c000},
1747 {"device-config", 0xfc0000, 0x10000},
1748 {"default-config", 0xfd0000, 0x10000},
1749 {"partition-table", 0xfe0000, 0x00800},
1750 {"soft-version", 0xfe0800, 0x00100},
1751 {"support-list", 0xfe0900, 0x00200},
1752 {"profile", 0xfe0b00, 0x03000},
1753 {"extra-para", 0xfe3b00, 0x00100},
1754 {"radio", 0xff0000, 0x10000},
1757 .first_sysupgrade_partition
= "os-image",
1758 .last_sysupgrade_partition
= "file-system",
1761 /** Firmware layout for the Deco M5 */
1767 "{product_name:M5,product_ver:1.0.0,special_id:55530000}\n"
1768 "{product_name:M5,product_ver:1.0.0,special_id:45550000}\n"
1769 "{product_name:M5,product_ver:1.0.0,special_id:43410000}\n"
1770 "{product_name:M5,product_ver:1.0.0,special_id:4A500000}\n"
1771 "{product_name:M5,product_ver:1.0.0,special_id:41550000}\n"
1772 "{product_name:M5,product_ver:1.0.0,special_id:4B520000}\n"
1773 "{product_name:M5,product_ver:1.0.0,special_id:49440000}\n"
1774 "{product_name:M5,product_ver:3.0.0,special_id:55530000}\n"
1775 "{product_name:M5,product_ver:3.0.0,special_id:45550000}\n"
1776 "{product_name:M5,product_ver:3.0.0,special_id:43410000}\n"
1777 "{product_name:M5,product_ver:3.0.0,special_id:4A500000}\n"
1778 "{product_name:M5,product_ver:3.0.0,special_id:41550000}\n"
1779 "{product_name:M5,product_ver:3.0.0,special_id:4B520000}\n"
1780 "{product_name:M5,product_ver:3.0.0,special_id:49440000}\n"
1781 "{product_name:M5,product_ver:3.0.0,special_id:53570000}\n"
1782 "{product_name:M5,product_ver:3.0.0,special_id:42340000}\n"
1783 "{product_name:M5,product_ver:3.0.0,special_id:54570000}\n"
1784 "{product_name:M5,product_ver:3.2.0,special_id:55530000}\n"
1785 "{product_name:M5,product_ver:3.2.0,special_id:45550000}\n"
1786 "{product_name:M5,product_ver:3.2.0,special_id:43410000}\n"
1787 "{product_name:M5,product_ver:3.2.0,special_id:4A500000}\n"
1788 "{product_name:M5,product_ver:3.2.0,special_id:41550000}\n"
1789 "{product_name:M5,product_ver:3.2.0,special_id:4B520000}\n"
1790 "{product_name:M5,product_ver:3.2.0,special_id:49440000}\n"
1791 "{product_name:M5,product_ver:3.2.0,special_id:53570000}\n"
1792 "{product_name:M5,product_ver:3.2.0,special_id:42340000}\n"
1793 "{product_name:M5,product_ver:3.2.0,special_id:54570000}\n",
1795 .soft_ver
= SOFT_VER_DEFAULT
,
1798 {"SBL1", 0x00000, 0x30000},
1799 {"boot-config_0", 0x30000, 0x10000},
1800 {"MIBIB", 0x40000, 0x10000},
1801 {"boot-config_1", 0x50000, 0x10000},
1802 {"QSEE", 0x60000, 0x60000},
1803 {"CDT", 0xc0000, 0x10000},
1804 {"DDRPARAMS", 0xd0000, 0x10000},
1805 {"uboot-env", 0xe0000, 0x10000},
1806 {"fs-uboot@0", 0xf0000, 0x80000},
1807 {"radio", 0x170000, 0x0fff0},
1808 {"bluetooth-XTAL", 0x17fff0, 0x00010},
1809 {"default-mac", 0x180000, 0x01000},
1810 {"device-id", 0x182000, 0x01000},
1811 {"product-info", 0x183000, 0x05000},
1812 {"support-list", 0x190000, 0x10000},
1813 {"user-config", 0x200000, 0x10000},
1814 {"device-config", 0x210000, 0x10000},
1815 {"group-info", 0x220000, 0x10000},
1816 {"partition-table@0", 0x230000, 0x02000},
1817 {"os-image@0", 0x240000, 0x300000},
1818 {"file-system@0", 0x540000, 0x790000},
1819 {"soft-version@0", 0xcd0000, 0x10000},
1820 {"profile@0", 0xce0000, 0x10000},
1821 {"default-config@0", 0xcf0000, 0x10000},
1822 {"partition-table@1", 0xd00000, 0x02000},
1823 {"fs-uboot@1", 0xd10000, 0x80000},
1824 {"os-image@1", 0xd90000, 0x400000},
1825 {"file-system@1", 0x1190000, 0xc40000},
1826 {"soft-version@1", 0x1dd0000, 0x10000},
1827 {"profile@1", 0x1de0000, 0x10000},
1828 {"default-config@1", 0x1df0000, 0x10000},
1829 {"tm-sig", 0x1e00000, 0x200000},
1833 .partition_names
.partition_table
= "partition-table@1",
1834 .partition_names
.soft_ver
= "soft-version@1",
1835 .partition_names
.os_image
= "os-image@1",
1836 .partition_names
.file_system
= "file-system@1",
1838 .first_sysupgrade_partition
= "os-image@1",
1839 .last_sysupgrade_partition
= "file-system@1"
1842 /** Firmware layout for the Deco S4 v2 */
1848 "{product_name:S4,product_ver:1.0.0,special_id:55530000}\n"
1849 "{product_name:S4,product_ver:1.0.0,special_id:45550000}\n"
1850 "{product_name:S4,product_ver:1.0.0,special_id:43410000}\n"
1851 "{product_name:S4,product_ver:1.0.0,special_id:4A500000}\n"
1852 "{product_name:S4,product_ver:1.0.0,special_id:41550000}\n"
1853 "{product_name:S4,product_ver:1.0.0,special_id:4B520000}\n"
1854 "{product_name:S4,product_ver:2.0.0,special_id:55530000}\n"
1855 "{product_name:S4,product_ver:2.0.0,special_id:45550000}\n"
1856 "{product_name:S4,product_ver:2.0.0,special_id:43410000}\n"
1857 "{product_name:S4,product_ver:2.0.0,special_id:4A500000}\n"
1858 "{product_name:S4,product_ver:2.0.0,special_id:41550000}\n"
1859 "{product_name:S4,product_ver:2.0.0,special_id:4B520000}\n",
1861 .soft_ver
= SOFT_VER_DEFAULT
,
1864 {"fs-uboot", 0x00000, 0x80000},
1865 {"product-info", 0x80000, 0x05000},
1866 {"default-mac", 0x85000, 0x01000},
1867 {"device-id", 0x86000, 0x01000},
1868 {"support-list", 0x87000, 0x10000},
1869 {"user-config", 0xa7000, 0x10000},
1870 {"device-config", 0xb7000, 0x10000},
1871 {"group-info", 0xc7000, 0x10000},
1872 {"partition-table", 0xd7000, 0x02000},
1873 {"soft-version", 0xd9000, 0x10000},
1874 {"profile", 0xe9000, 0x10000},
1875 {"default-config", 0xf9000, 0x10000},
1876 {"url-sig", 0x1e0000, 0x10000},
1877 {"radio", 0x1f0000, 0x10000},
1878 {"firmware", 0x200000, 0xe00000},
1881 .first_sysupgrade_partition
= "os-image",
1882 .last_sysupgrade_partition
= "file-system",
1885 /** Firmware layout for the EAP120 */
1888 .vendor
= "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1891 "EAP120(TP-LINK|UN|N300-2):1.0\r\n",
1893 .soft_ver
= SOFT_VER_DEFAULT
,
1896 {"fs-uboot", 0x00000, 0x20000},
1897 {"partition-table", 0x20000, 0x02000},
1898 {"default-mac", 0x30000, 0x00020},
1899 {"support-list", 0x31000, 0x00100},
1900 {"product-info", 0x31100, 0x00100},
1901 {"soft-version", 0x32000, 0x00100},
1902 {"os-image", 0x40000, 0x180000},
1903 {"file-system", 0x1c0000, 0x600000},
1904 {"user-config", 0x7c0000, 0x10000},
1905 {"backup-config", 0x7d0000, 0x10000},
1906 {"log", 0x7e0000, 0x10000},
1907 {"radio", 0x7f0000, 0x10000},
1911 .first_sysupgrade_partition
= "os-image",
1912 .last_sysupgrade_partition
= "file-system"
1915 /** Firmware layout for the EAP225-Outdoor v1 */
1917 .id
= "EAP225-OUTDOOR-V1",
1920 "EAP225-Outdoor(TP-Link|UN|AC1200-D):1.0\r\n",
1921 .part_trail
= PART_TRAIL_NONE
,
1922 .soft_ver
= SOFT_VER_DEFAULT
,
1923 .soft_ver_compat_level
= 1,
1926 {"fs-uboot", 0x00000, 0x20000},
1927 {"partition-table", 0x20000, 0x02000},
1928 {"default-mac", 0x30000, 0x01000},
1929 {"support-list", 0x31000, 0x00100},
1930 {"product-info", 0x31100, 0x00400},
1931 {"soft-version", 0x32000, 0x00100},
1932 {"firmware", 0x40000, 0xd80000},
1933 {"user-config", 0xdc0000, 0x30000},
1934 {"mutil-log", 0xf30000, 0x80000},
1935 {"oops", 0xfb0000, 0x40000},
1936 {"radio", 0xff0000, 0x10000},
1940 .first_sysupgrade_partition
= "os-image",
1941 .last_sysupgrade_partition
= "file-system"
1944 /** Firmware layout for the EAP225 v1 */
1949 "EAP225(TP-LINK|UN|AC1200-D):1.0\r\n",
1950 .part_trail
= PART_TRAIL_NONE
,
1951 .soft_ver
= SOFT_VER_DEFAULT
,
1954 {"fs-uboot", 0x00000, 0x20000},
1955 {"partition-table", 0x20000, 0x02000},
1956 {"default-mac", 0x30000, 0x01000},
1957 {"support-list", 0x31000, 0x00100},
1958 {"product-info", 0x31100, 0x00400},
1959 {"soft-version", 0x32000, 0x00100},
1960 {"firmware", 0x40000, 0xd80000},
1961 {"user-config", 0xdc0000, 0x30000},
1962 {"radio", 0xff0000, 0x10000},
1966 .first_sysupgrade_partition
= "os-image",
1967 .last_sysupgrade_partition
= "file-system"
1970 /** Firmware layout for the EAP225 v3
1971 * Also compatible with:
1974 * - EAP225-Outdoor v1
1975 * - EAP225-Outdoor v3
1981 "EAP225(TP-Link|UN|AC1350-D):3.0\r\n"
1982 "EAP225(TP-Link|UN|AC1350-D):3.20\r\n"
1983 "EAP225(TP-Link|UN|AC1350-D):4.0 CA\r\n"
1984 "EAP225-Outdoor(TP-Link|UN|AC1200-D):1.0\r\n"
1985 "EAP225-Outdoor(TP-Link|UN|AC1200-D):3.0 CA,JP\r\n",
1986 .part_trail
= PART_TRAIL_NONE
,
1987 .soft_ver
= SOFT_VER_DEFAULT
,
1988 .soft_ver_compat_level
= 1,
1991 {"fs-uboot", 0x00000, 0x20000},
1992 {"partition-table", 0x20000, 0x02000},
1993 {"default-mac", 0x30000, 0x01000},
1994 {"support-list", 0x31000, 0x00100},
1995 {"product-info", 0x31100, 0x00400},
1996 {"soft-version", 0x32000, 0x00100},
1997 {"firmware", 0x40000, 0xd80000},
1998 {"user-config", 0xdc0000, 0x30000},
1999 {"mutil-log", 0xf30000, 0x80000},
2000 {"oops", 0xfb0000, 0x40000},
2001 {"radio", 0xff0000, 0x10000},
2005 .first_sysupgrade_partition
= "os-image",
2006 .last_sysupgrade_partition
= "file-system"
2009 /** Firmware layout for the EAP225-Wall v2 */
2011 .id
= "EAP225-WALL-V2",
2014 "EAP225-Wall(TP-Link|UN|AC1200-D):2.0\r\n",
2015 .part_trail
= PART_TRAIL_NONE
,
2016 .soft_ver
= SOFT_VER_DEFAULT
,
2017 .soft_ver_compat_level
= 1,
2020 {"fs-uboot", 0x00000, 0x20000},
2021 {"partition-table", 0x20000, 0x02000},
2022 {"default-mac", 0x30000, 0x01000},
2023 {"support-list", 0x31000, 0x00100},
2024 {"product-info", 0x31100, 0x00400},
2025 {"soft-version", 0x32000, 0x00100},
2026 {"firmware", 0x40000, 0xd80000},
2027 {"user-config", 0xdc0000, 0x30000},
2028 {"mutil-log", 0xf30000, 0x80000},
2029 {"oops", 0xfb0000, 0x40000},
2030 {"radio", 0xff0000, 0x10000},
2034 .first_sysupgrade_partition
= "os-image",
2035 .last_sysupgrade_partition
= "file-system"
2038 /** Firmware layout for the EAP235-Wall v1 */
2040 .id
= "EAP235-WALL-V1",
2043 "EAP235-Wall(TP-Link|UN|AC1200-D):1.0\r\n",
2044 .part_trail
= PART_TRAIL_NONE
,
2045 .soft_ver
= SOFT_VER_NUMERIC(3, 0, 0),
2046 .soft_ver_compat_level
= 1,
2049 {"fs-uboot", 0x00000, 0x80000},
2050 {"partition-table", 0x80000, 0x02000},
2051 {"default-mac", 0x90000, 0x01000},
2052 {"support-list", 0x91000, 0x00100},
2053 {"product-info", 0x91100, 0x00400},
2054 {"soft-version", 0x92000, 0x00100},
2055 {"firmware", 0xa0000, 0xd20000},
2056 {"user-config", 0xdc0000, 0x30000},
2057 {"mutil-log", 0xf30000, 0x80000},
2058 {"oops", 0xfb0000, 0x40000},
2059 {"radio", 0xff0000, 0x10000},
2063 .first_sysupgrade_partition
= "os-image",
2064 .last_sysupgrade_partition
= "file-system"
2067 /** Firmware layout for the EAP245 v1 */
2072 "EAP245(TP-LINK|UN|AC1750-D):1.0\r\n",
2073 .part_trail
= PART_TRAIL_NONE
,
2074 .soft_ver
= SOFT_VER_DEFAULT
,
2077 {"fs-uboot", 0x00000, 0x20000},
2078 {"partition-table", 0x20000, 0x02000},
2079 {"default-mac", 0x30000, 0x01000},
2080 {"support-list", 0x31000, 0x00100},
2081 {"product-info", 0x31100, 0x00400},
2082 {"soft-version", 0x32000, 0x00100},
2083 {"firmware", 0x40000, 0xd80000},
2084 {"user-config", 0xdc0000, 0x30000},
2085 {"radio", 0xff0000, 0x10000},
2089 .first_sysupgrade_partition
= "os-image",
2090 .last_sysupgrade_partition
= "file-system"
2093 /** Firmware layout for the EAP245 v3 */
2098 "EAP245(TP-Link|UN|AC1750-D):3.0\r\n"
2099 "EAP265 HD(TP-Link|UN|AC1750-D):1.0",
2100 .part_trail
= PART_TRAIL_NONE
,
2101 .soft_ver
= SOFT_VER_DEFAULT
,
2102 .soft_ver_compat_level
= 1,
2104 /** Firmware partition with dynamic kernel/rootfs split */
2106 {"factroy-boot", 0x00000, 0x40000},
2107 {"fs-uboot", 0x40000, 0x40000},
2108 {"partition-table", 0x80000, 0x10000},
2109 {"default-mac", 0x90000, 0x01000},
2110 {"support-list", 0x91000, 0x00100},
2111 {"product-info", 0x91100, 0x00400},
2112 {"soft-version", 0x92000, 0x00100},
2113 {"radio", 0xa0000, 0x10000},
2114 {"extra-para", 0xb0000, 0x10000},
2115 {"firmware", 0xc0000, 0xe40000},
2116 {"config", 0xf00000, 0x30000},
2117 {"mutil-log", 0xf30000, 0x80000},
2118 {"oops", 0xfb0000, 0x40000},
2122 .first_sysupgrade_partition
= "os-image",
2123 .last_sysupgrade_partition
= "file-system"
2126 /** Firmware layout for the EAP610 v3/EAP613 v1 */
2129 .soft_ver
= SOFT_VER_DEFAULT
,
2130 .soft_ver_compat_level
= 1,
2133 "EAP610(TP-Link|UN|AX1800-D):3.0\r\n"
2134 "EAP610(TP-Link|JP|AX1800-D):3.0\r\n"
2135 "EAP610(TP-Link|EG|AX1800-D):3.0\r\n"
2136 "EAP610(TP-Link|CA|AX1800-D):3.0\r\n"
2137 "EAP613(TP-Link|UN|AX1800-D):1.0 JP\r\n",
2138 .part_trail
= PART_TRAIL_NONE
,
2141 {"fs-uboot", 0x00000, 0x80000},
2142 {"partition-table", 0x80000, 0x02000},
2143 {"default-mac", 0x90000, 0x01000},
2144 {"support-list", 0x91000, 0x00100},
2145 {"product-info", 0x91100, 0x00400},
2146 {"soft-version", 0x92000, 0x00100},
2147 {"firmware", 0xa0000, 0xcf0000},
2148 {"user-config", 0xd90000, 0x60000},
2149 {"mutil-log", 0xf30000, 0x80000},
2150 {"oops", 0xfb0000, 0x40000},
2151 {"radio", 0xff0000, 0x10000},
2155 .first_sysupgrade_partition
= "os-image",
2156 .last_sysupgrade_partition
= "file-system"
2159 /** Firmware layout for the EAP615-Wall v1 */
2161 .id
= "EAP615-WALL-V1",
2162 .soft_ver
= SOFT_VER_DEFAULT
,
2163 .soft_ver_compat_level
= 2,
2166 "EAP615-Wall(TP-Link|UN|AX1800-D):1.0\r\n"
2167 "EAP615-Wall(TP-Link|CA|AX1800-D):1.0\r\n"
2168 "EAP615-Wall(TP-Link|JP|AX1800-D):1.0\r\n",
2169 .part_trail
= PART_TRAIL_NONE
,
2172 {"fs-uboot", 0x00000, 0x80000},
2173 {"partition-table", 0x80000, 0x02000},
2174 {"default-mac", 0x90000, 0x01000},
2175 {"support-list", 0x91000, 0x00100},
2176 {"product-info", 0x91100, 0x00400},
2177 {"soft-version", 0x92000, 0x00100},
2178 {"firmware", 0xa0000, 0xcf0000},
2179 {"user-config", 0xd90000, 0x60000},
2180 {"mutil-log", 0xf30000, 0x80000},
2181 {"oops", 0xfb0000, 0x40000},
2182 {"radio", 0xff0000, 0x10000},
2186 .first_sysupgrade_partition
= "os-image",
2187 .last_sysupgrade_partition
= "file-system"
2190 /** Firmware layout for the TL-WA1201 v2 */
2192 .id
= "TL-WA1201-V2",
2196 "{product_name:TL-WA1201,product_ver:2.0.0,special_id:45550000}\n"
2197 "{product_name:TL-WA1201,product_ver:2.0.0,special_id:55530000}\n",
2199 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.0.1 Build 20200709 rel.66244\n"),
2202 {"fs-uboot", 0x00000, 0x20000},
2203 {"default-mac", 0x20000, 0x00200},
2204 {"pin", 0x20200, 0x00100},
2205 {"product-info", 0x20300, 0x00200},
2206 {"device-id", 0x20500, 0x0fb00},
2207 {"firmware", 0x30000, 0xce0000},
2208 {"portal-logo", 0xd10000, 0x20000},
2209 {"portal-back", 0xd30000, 0x200000},
2210 {"soft-version", 0xf30000, 0x00200},
2211 {"extra-para", 0xf30200, 0x00200},
2212 {"support-list", 0xf30400, 0x00200},
2213 {"profile", 0xf30600, 0x0fa00},
2214 {"apdef-config", 0xf40000, 0x10000},
2215 {"ap-config", 0xf50000, 0x10000},
2216 {"redef-config", 0xf60000, 0x10000},
2217 {"re-config", 0xf70000, 0x10000},
2218 {"multidef-config", 0xf80000, 0x10000},
2219 {"multi-config", 0xf90000, 0x10000},
2220 {"clientdef-config", 0xfa0000, 0x10000},
2221 {"client-config", 0xfb0000, 0x10000},
2222 {"partition-table", 0xfc0000, 0x10000},
2223 {"user-config", 0xfd0000, 0x10000},
2224 {"certificate", 0xfe0000, 0x10000},
2225 {"radio", 0xff0000, 0x10000},
2228 .first_sysupgrade_partition
= "os-image",
2229 .last_sysupgrade_partition
= "file-system",
2232 /** Firmware layout for the TL-WA850RE v2 */
2234 .id
= "TLWA850REV2",
2238 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55530000}\n"
2239 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:00000000}\n"
2240 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55534100}\n"
2241 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:45550000}\n"
2242 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4B520000}\n"
2243 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:42520000}\n"
2244 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4A500000}\n"
2245 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:43410000}\n"
2246 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:41550000}\n"
2247 "{product_name:TL-WA850RE,product_ver:2.0.0,special_id:52550000}\n",
2249 .soft_ver
= SOFT_VER_DEFAULT
,
2252 576KB were moved from file-system to os-image
2253 in comparison to the stock image
2256 {"fs-uboot", 0x00000, 0x20000},
2257 {"firmware", 0x20000, 0x390000},
2258 {"partition-table", 0x3b0000, 0x02000},
2259 {"default-mac", 0x3c0000, 0x00020},
2260 {"pin", 0x3c0100, 0x00020},
2261 {"product-info", 0x3c1000, 0x01000},
2262 {"soft-version", 0x3c2000, 0x00100},
2263 {"support-list", 0x3c3000, 0x01000},
2264 {"profile", 0x3c4000, 0x08000},
2265 {"user-config", 0x3d0000, 0x10000},
2266 {"default-config", 0x3e0000, 0x10000},
2267 {"radio", 0x3f0000, 0x10000},
2271 .first_sysupgrade_partition
= "os-image",
2272 .last_sysupgrade_partition
= "file-system"
2275 /** Firmware layout for the TL-WA855RE v1 */
2277 .id
= "TLWA855REV1",
2281 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:00000000}\n"
2282 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:55530000}\n"
2283 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:45550000}\n"
2284 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4B520000}\n"
2285 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:42520000}\n"
2286 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:4A500000}\n"
2287 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:43410000}\n"
2288 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:41550000}\n"
2289 "{product_name:TL-WA855RE,product_ver:1.0.0,special_id:52550000}\n",
2291 .soft_ver
= SOFT_VER_DEFAULT
,
2294 {"fs-uboot", 0x00000, 0x20000},
2295 {"os-image", 0x20000, 0x150000},
2296 {"file-system", 0x170000, 0x240000},
2297 {"partition-table", 0x3b0000, 0x02000},
2298 {"default-mac", 0x3c0000, 0x00020},
2299 {"pin", 0x3c0100, 0x00020},
2300 {"product-info", 0x3c1000, 0x01000},
2301 {"soft-version", 0x3c2000, 0x00100},
2302 {"support-list", 0x3c3000, 0x01000},
2303 {"profile", 0x3c4000, 0x08000},
2304 {"user-config", 0x3d0000, 0x10000},
2305 {"default-config", 0x3e0000, 0x10000},
2306 {"radio", 0x3f0000, 0x10000},
2310 .first_sysupgrade_partition
= "os-image",
2311 .last_sysupgrade_partition
= "file-system"
2314 /** Firmware layout for the TL-WPA8630P v2 (EU)*/
2316 .id
= "TL-WPA8630P-V2.0-EU",
2320 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:45550000}\n",
2322 .soft_ver
= SOFT_VER_DEFAULT
,
2325 {"factory-uboot", 0x00000, 0x20000},
2326 {"fs-uboot", 0x20000, 0x20000},
2327 {"firmware", 0x40000, 0x5e0000},
2328 {"partition-table", 0x620000, 0x02000},
2329 {"default-mac", 0x630000, 0x00020},
2330 {"pin", 0x630100, 0x00020},
2331 {"device-id", 0x630200, 0x00030},
2332 {"product-info", 0x631100, 0x01000},
2333 {"extra-para", 0x632100, 0x01000},
2334 {"soft-version", 0x640000, 0x01000},
2335 {"support-list", 0x641000, 0x01000},
2336 {"profile", 0x642000, 0x08000},
2337 {"user-config", 0x650000, 0x10000},
2338 {"default-config", 0x660000, 0x10000},
2339 {"default-nvm", 0x670000, 0xc0000},
2340 {"default-pib", 0x730000, 0x40000},
2341 {"radio", 0x7f0000, 0x10000},
2345 .first_sysupgrade_partition
= "os-image",
2346 .last_sysupgrade_partition
= "file-system"
2349 /** Firmware layout for the TL-WPA8630P v2 (INT)*/
2351 .id
= "TL-WPA8630P-V2-INT",
2355 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:41550000}\n"
2356 "{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:44450000}\n"
2357 "{product_name:TL-WPA8630P,product_ver:2.1.0,special_id:41550000}\n",
2359 .soft_ver
= SOFT_VER_DEFAULT
,
2362 {"factory-uboot", 0x00000, 0x20000},
2363 {"fs-uboot", 0x20000, 0x20000},
2364 {"firmware", 0x40000, 0x5e0000},
2365 {"partition-table", 0x620000, 0x02000},
2366 {"extra-para", 0x632100, 0x01000},
2367 {"soft-version", 0x640000, 0x01000},
2368 {"support-list", 0x641000, 0x01000},
2369 {"profile", 0x642000, 0x08000},
2370 {"user-config", 0x650000, 0x10000},
2371 {"default-config", 0x660000, 0x10000},
2372 {"default-nvm", 0x670000, 0xc0000},
2373 {"default-pib", 0x730000, 0x40000},
2374 {"default-mac", 0x7e0000, 0x00020},
2375 {"pin", 0x7e0100, 0x00020},
2376 {"device-id", 0x7e0200, 0x00030},
2377 {"product-info", 0x7e1100, 0x01000},
2378 {"radio", 0x7f0000, 0x10000},
2382 .first_sysupgrade_partition
= "os-image",
2383 .last_sysupgrade_partition
= "file-system"
2386 /** Firmware layout for the TL-WPA8630P v2.1 (EU)*/
2388 .id
= "TL-WPA8630P-V2.1-EU",
2392 "{product_name:TL-WPA8630P,product_ver:2.1.0,special_id:45550000}\n",
2394 .soft_ver
= SOFT_VER_DEFAULT
,
2397 {"factory-uboot", 0x00000, 0x20000},
2398 {"fs-uboot", 0x20000, 0x20000},
2399 {"firmware", 0x40000, 0x5e0000},
2400 {"extra-para", 0x680000, 0x01000},
2401 {"product-info", 0x690000, 0x01000},
2402 {"partition-table", 0x6a0000, 0x02000},
2403 {"soft-version", 0x6b0000, 0x01000},
2404 {"support-list", 0x6b1000, 0x01000},
2405 {"profile", 0x6b2000, 0x08000},
2406 {"user-config", 0x6c0000, 0x10000},
2407 {"default-config", 0x6d0000, 0x10000},
2408 {"default-nvm", 0x6e0000, 0xc0000},
2409 {"default-pib", 0x7a0000, 0x40000},
2410 {"default-mac", 0x7e0000, 0x00020},
2411 {"pin", 0x7e0100, 0x00020},
2412 {"device-id", 0x7e0200, 0x00030},
2413 {"radio", 0x7f0000, 0x10000},
2417 .first_sysupgrade_partition
= "os-image",
2418 .last_sysupgrade_partition
= "file-system"
2421 /** Firmware layout for the TL-WPA8631P v3 */
2423 .id
= "TL-WPA8631P-V3",
2427 "{product_name:TL-WPA8631P,product_ver:3.0.0,special_id:41550000}\n"
2428 "{product_name:TL-WPA8631P,product_ver:3.0.0,special_id:45550000}\n"
2429 "{product_name:TL-WPA8631P,product_ver:3.0.0,special_id:55530000}\n"
2430 "{product_name:TL-WPA8631P,product_ver:4.0.0,special_id:41550000}\n"
2431 "{product_name:TL-WPA8631P,product_ver:4.0.0,special_id:45550000}\n"
2432 "{product_name:TL-WPA8631P,product_ver:4.0.0,special_id:55530000}\n"
2433 "{product_name:TL-WPA8635P,product_ver:3.0.0,special_id:46520000}\n",
2435 .soft_ver
= SOFT_VER_DEFAULT
,
2438 {"fs-uboot", 0x00000, 0x20000},
2439 {"firmware", 0x20000, 0x710000},
2440 {"partition-table", 0x730000, 0x02000},
2441 {"default-mac", 0x732000, 0x00020},
2442 {"pin", 0x732100, 0x00020},
2443 {"device-id", 0x732200, 0x00030},
2444 {"default-region", 0x732300, 0x00010},
2445 {"product-info", 0x732400, 0x00200},
2446 {"extra-para", 0x732600, 0x00200},
2447 {"soft-version", 0x732800, 0x00100},
2448 {"support-list", 0x732900, 0x00200},
2449 {"profile", 0x732b00, 0x00100},
2450 {"default-config", 0x732c00, 0x00800},
2451 {"plc-type", 0x733400, 0x00020},
2452 {"default-pib", 0x733500, 0x06000},
2453 {"user-config", 0x740000, 0x10000},
2454 {"plc-pib", 0x750000, 0x10000},
2455 {"plc-nvm", 0x760000, 0x90000},
2456 {"radio", 0x7f0000, 0x10000},
2460 .first_sysupgrade_partition
= "os-image",
2461 .last_sysupgrade_partition
= "file-system"
2464 /** Firmware layout for the TL-WR1043 v5 */
2466 .id
= "TLWR1043NV5",
2470 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:45550000}\n"
2471 "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:55530000}\n",
2473 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.0.0\n"),
2475 {"factory-boot", 0x00000, 0x20000},
2476 {"fs-uboot", 0x20000, 0x20000},
2477 {"firmware", 0x40000, 0xec0000},
2478 {"default-mac", 0xf00000, 0x00200},
2479 {"pin", 0xf00200, 0x00200},
2480 {"device-id", 0xf00400, 0x00100},
2481 {"product-info", 0xf00500, 0x0fb00},
2482 {"soft-version", 0xf10000, 0x01000},
2483 {"extra-para", 0xf11000, 0x01000},
2484 {"support-list", 0xf12000, 0x0a000},
2485 {"profile", 0xf1c000, 0x04000},
2486 {"default-config", 0xf20000, 0x10000},
2487 {"user-config", 0xf30000, 0x40000},
2488 {"qos-db", 0xf70000, 0x40000},
2489 {"certificate", 0xfb0000, 0x10000},
2490 {"partition-table", 0xfc0000, 0x10000},
2491 {"log", 0xfd0000, 0x20000},
2492 {"radio", 0xff0000, 0x10000},
2495 .first_sysupgrade_partition
= "os-image",
2496 .last_sysupgrade_partition
= "file-system"
2499 /** Firmware layout for the TL-WR1043 v4 */
2501 .id
= "TLWR1043NDV4",
2505 "{product_name:TL-WR1043ND,product_ver:4.0.0,special_id:45550000}\n",
2507 .soft_ver
= SOFT_VER_DEFAULT
,
2509 /* We're using a dynamic kernel/rootfs split here */
2511 {"fs-uboot", 0x00000, 0x20000},
2512 {"firmware", 0x20000, 0xf30000},
2513 {"default-mac", 0xf50000, 0x00200},
2514 {"pin", 0xf50200, 0x00200},
2515 {"product-info", 0xf50400, 0x0fc00},
2516 {"soft-version", 0xf60000, 0x0b000},
2517 {"support-list", 0xf6b000, 0x04000},
2518 {"profile", 0xf70000, 0x04000},
2519 {"default-config", 0xf74000, 0x0b000},
2520 {"user-config", 0xf80000, 0x40000},
2521 {"partition-table", 0xfc0000, 0x10000},
2522 {"log", 0xfd0000, 0x20000},
2523 {"radio", 0xff0000, 0x10000},
2527 .first_sysupgrade_partition
= "os-image",
2528 .last_sysupgrade_partition
= "file-system"
2531 /** Firmware layout for the TL-WR902AC v1 */
2533 .id
= "TL-WR902AC-V1",
2537 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:45550000}\n"
2538 "{product_name:TL-WR902AC,product_ver:1.0.0,special_id:55530000}\n",
2540 .soft_ver
= SOFT_VER_DEFAULT
,
2543 384KB were moved from file-system to os-image
2544 in comparison to the stock image
2547 {"fs-uboot", 0x00000, 0x20000},
2548 {"firmware", 0x20000, 0x730000},
2549 {"default-mac", 0x750000, 0x00200},
2550 {"pin", 0x750200, 0x00200},
2551 {"product-info", 0x750400, 0x0fc00},
2552 {"soft-version", 0x760000, 0x0b000},
2553 {"support-list", 0x76b000, 0x04000},
2554 {"profile", 0x770000, 0x04000},
2555 {"default-config", 0x774000, 0x0b000},
2556 {"user-config", 0x780000, 0x40000},
2557 {"partition-table", 0x7c0000, 0x10000},
2558 {"log", 0x7d0000, 0x20000},
2559 {"radio", 0x7f0000, 0x10000},
2563 .first_sysupgrade_partition
= "os-image",
2564 .last_sysupgrade_partition
= "file-system",
2567 /** Firmware layout for the TL-WR941HP v1 */
2569 .id
= "TL-WR941HP-V1",
2573 "{product_name:TL-WR941HP,product_ver:1.0.0,special_id:00000000}\n",
2575 .soft_ver
= SOFT_VER_DEFAULT
,
2578 {"fs-uboot", 0x00000, 0x20000},
2579 {"firmware", 0x20000, 0x730000},
2580 {"default-mac", 0x750000, 0x00200},
2581 {"pin", 0x750200, 0x00200},
2582 {"product-info", 0x750400, 0x0fc00},
2583 {"soft-version", 0x760000, 0x0b000},
2584 {"support-list", 0x76b000, 0x04000},
2585 {"profile", 0x770000, 0x04000},
2586 {"default-config", 0x774000, 0x0b000},
2587 {"user-config", 0x780000, 0x40000},
2588 {"partition-table", 0x7c0000, 0x10000},
2589 {"log", 0x7d0000, 0x20000},
2590 {"radio", 0x7f0000, 0x10000},
2594 .first_sysupgrade_partition
= "os-image",
2595 .last_sysupgrade_partition
= "file-system",
2598 /** Firmware layout for the TL-WR942N V1 */
2604 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:00000000}\r\n"
2605 "{product_name:TL-WR942N,product_ver:1.0.0,special_id:52550000}\r\n",
2607 .soft_ver
= SOFT_VER_DEFAULT
,
2610 {"fs-uboot", 0x00000, 0x20000},
2611 {"firmware", 0x20000, 0xe20000},
2612 {"default-mac", 0xe40000, 0x00200},
2613 {"pin", 0xe40200, 0x00200},
2614 {"product-info", 0xe40400, 0x0fc00},
2615 {"partition-table", 0xe50000, 0x10000},
2616 {"soft-version", 0xe60000, 0x10000},
2617 {"support-list", 0xe70000, 0x10000},
2618 {"profile", 0xe80000, 0x10000},
2619 {"default-config", 0xe90000, 0x10000},
2620 {"user-config", 0xea0000, 0x40000},
2621 {"qos-db", 0xee0000, 0x40000},
2622 {"certificate", 0xf20000, 0x10000},
2623 {"usb-config", 0xfb0000, 0x10000},
2624 {"log", 0xfc0000, 0x20000},
2625 {"radio-bk", 0xfe0000, 0x10000},
2626 {"radio", 0xff0000, 0x10000},
2630 .first_sysupgrade_partition
= "os-image",
2631 .last_sysupgrade_partition
= "file-system",
2634 /** Firmware layout for the RE200 v2 */
2640 "{product_name:RE200,product_ver:2.0.0,special_id:00000000}\n"
2641 "{product_name:RE200,product_ver:2.0.0,special_id:41520000}\n"
2642 "{product_name:RE200,product_ver:2.0.0,special_id:41550000}\n"
2643 "{product_name:RE200,product_ver:2.0.0,special_id:42520000}\n"
2644 "{product_name:RE200,product_ver:2.0.0,special_id:43410000}\n"
2645 "{product_name:RE200,product_ver:2.0.0,special_id:45530000}\n"
2646 "{product_name:RE200,product_ver:2.0.0,special_id:45550000}\n"
2647 "{product_name:RE200,product_ver:2.0.0,special_id:49440000}\n"
2648 "{product_name:RE200,product_ver:2.0.0,special_id:4a500000}\n"
2649 "{product_name:RE200,product_ver:2.0.0,special_id:4b520000}\n"
2650 "{product_name:RE200,product_ver:2.0.0,special_id:52550000}\n"
2651 "{product_name:RE200,product_ver:2.0.0,special_id:54570000}\n"
2652 "{product_name:RE200,product_ver:2.0.0,special_id:55530000}\n",
2654 .soft_ver
= SOFT_VER_DEFAULT
,
2657 {"fs-uboot", 0x00000, 0x20000},
2658 {"firmware", 0x20000, 0x7a0000},
2659 {"partition-table", 0x7c0000, 0x02000},
2660 {"default-mac", 0x7c2000, 0x00020},
2661 {"pin", 0x7c2100, 0x00020},
2662 {"product-info", 0x7c3100, 0x01000},
2663 {"soft-version", 0x7c4200, 0x01000},
2664 {"support-list", 0x7c5200, 0x01000},
2665 {"profile", 0x7c6200, 0x08000},
2666 {"config-info", 0x7ce200, 0x00400},
2667 {"user-config", 0x7d0000, 0x10000},
2668 {"default-config", 0x7e0000, 0x10000},
2669 {"radio", 0x7f0000, 0x10000},
2673 .first_sysupgrade_partition
= "os-image",
2674 .last_sysupgrade_partition
= "file-system"
2677 /** Firmware layout for the RE200 v3 */
2683 "{product_name:RE200,product_ver:3.0.0,special_id:00000000}\n"
2684 "{product_name:RE200,product_ver:3.0.0,special_id:41520000}\n"
2685 "{product_name:RE200,product_ver:3.0.0,special_id:41550000}\n"
2686 "{product_name:RE200,product_ver:3.0.0,special_id:42520000}\n"
2687 "{product_name:RE200,product_ver:3.0.0,special_id:43410000}\n"
2688 "{product_name:RE200,product_ver:3.0.0,special_id:45470000}\n"
2689 "{product_name:RE200,product_ver:3.0.0,special_id:45530000}\n"
2690 "{product_name:RE200,product_ver:3.0.0,special_id:45550000}\n"
2691 "{product_name:RE200,product_ver:3.0.0,special_id:49440000}\n"
2692 "{product_name:RE200,product_ver:3.0.0,special_id:4A500000}\n"
2693 "{product_name:RE200,product_ver:3.0.0,special_id:4B520000}\n"
2694 "{product_name:RE200,product_ver:3.0.0,special_id:52550000}\n"
2695 "{product_name:RE200,product_ver:3.0.0,special_id:54570000}\n"
2696 "{product_name:RE200,product_ver:3.0.0,special_id:55530000}\n",
2698 .soft_ver
= SOFT_VER_DEFAULT
,
2701 {"fs-uboot", 0x00000, 0x20000},
2702 {"firmware", 0x20000, 0x7a0000},
2703 {"partition-table", 0x7c0000, 0x02000},
2704 {"default-mac", 0x7c2000, 0x00020},
2705 {"pin", 0x7c2100, 0x00020},
2706 {"product-info", 0x7c3100, 0x01000},
2707 {"soft-version", 0x7c4200, 0x01000},
2708 {"support-list", 0x7c5200, 0x01000},
2709 {"profile", 0x7c6200, 0x08000},
2710 {"config-info", 0x7ce200, 0x00400},
2711 {"user-config", 0x7d0000, 0x10000},
2712 {"default-config", 0x7e0000, 0x10000},
2713 {"radio", 0x7f0000, 0x10000},
2717 .first_sysupgrade_partition
= "os-image",
2718 .last_sysupgrade_partition
= "file-system"
2721 /** Firmware layout for the RE200 v4 */
2727 "{product_name:RE200,product_ver:4.0.0,special_id:00000000}\n"
2728 "{product_name:RE200,product_ver:4.0.0,special_id:45550000}\n"
2729 "{product_name:RE200,product_ver:4.0.0,special_id:4A500000}\n"
2730 "{product_name:RE200,product_ver:4.0.0,special_id:4B520000}\n"
2731 "{product_name:RE200,product_ver:4.0.0,special_id:43410000}\n"
2732 "{product_name:RE200,product_ver:4.0.0,special_id:41550000}\n"
2733 "{product_name:RE200,product_ver:4.0.0,special_id:42520000}\n"
2734 "{product_name:RE200,product_ver:4.0.0,special_id:55530000}\n"
2735 "{product_name:RE200,product_ver:4.0.0,special_id:41520000}\n"
2736 "{product_name:RE200,product_ver:4.0.0,special_id:52550000}\n"
2737 "{product_name:RE200,product_ver:4.0.0,special_id:54570000}\n"
2738 "{product_name:RE200,product_ver:4.0.0,special_id:45530000}\n"
2739 "{product_name:RE200,product_ver:4.0.0,special_id:49440000}\n"
2740 "{product_name:RE200,product_ver:4.0.0,special_id:45470000}\n",
2742 .soft_ver
= SOFT_VER_TEXT("soft_ver:1.1.0\n"),
2745 {"fs-uboot", 0x00000, 0x20000},
2746 {"firmware", 0x20000, 0x7a0000},
2747 {"partition-table", 0x7c0000, 0x02000},
2748 {"default-mac", 0x7c2000, 0x00020},
2749 {"pin", 0x7c2100, 0x00020},
2750 {"product-info", 0x7c3100, 0x01000},
2751 {"soft-version", 0x7c4200, 0x01000},
2752 {"support-list", 0x7c5200, 0x01000},
2753 {"profile", 0x7c6200, 0x08000},
2754 {"config-info", 0x7ce200, 0x00400},
2755 {"user-config", 0x7d0000, 0x10000},
2756 {"default-config", 0x7e0000, 0x10000},
2757 {"radio", 0x7f0000, 0x10000},
2761 .first_sysupgrade_partition
= "os-image",
2762 .last_sysupgrade_partition
= "file-system"
2765 /** Firmware layout for the RE220 v2 */
2771 "{product_name:RE220,product_ver:2.0.0,special_id:00000000}\n"
2772 "{product_name:RE220,product_ver:2.0.0,special_id:41520000}\n"
2773 "{product_name:RE220,product_ver:2.0.0,special_id:41550000}\n"
2774 "{product_name:RE220,product_ver:2.0.0,special_id:42520000}\n"
2775 "{product_name:RE220,product_ver:2.0.0,special_id:43410000}\n"
2776 "{product_name:RE220,product_ver:2.0.0,special_id:45530000}\n"
2777 "{product_name:RE220,product_ver:2.0.0,special_id:45550000}\n"
2778 "{product_name:RE220,product_ver:2.0.0,special_id:49440000}\n"
2779 "{product_name:RE220,product_ver:2.0.0,special_id:4a500000}\n"
2780 "{product_name:RE220,product_ver:2.0.0,special_id:4b520000}\n"
2781 "{product_name:RE220,product_ver:2.0.0,special_id:52550000}\n"
2782 "{product_name:RE220,product_ver:2.0.0,special_id:54570000}\n"
2783 "{product_name:RE220,product_ver:2.0.0,special_id:55530000}\n",
2785 .soft_ver
= SOFT_VER_DEFAULT
,
2788 {"fs-uboot", 0x00000, 0x20000},
2789 {"firmware", 0x20000, 0x7a0000},
2790 {"partition-table", 0x7c0000, 0x02000},
2791 {"default-mac", 0x7c2000, 0x00020},
2792 {"pin", 0x7c2100, 0x00020},
2793 {"product-info", 0x7c3100, 0x01000},
2794 {"soft-version", 0x7c4200, 0x01000},
2795 {"support-list", 0x7c5200, 0x01000},
2796 {"profile", 0x7c6200, 0x08000},
2797 {"config-info", 0x7ce200, 0x00400},
2798 {"user-config", 0x7d0000, 0x10000},
2799 {"default-config", 0x7e0000, 0x10000},
2800 {"radio", 0x7f0000, 0x10000},
2804 .first_sysupgrade_partition
= "os-image",
2805 .last_sysupgrade_partition
= "file-system"
2808 /** Firmware layout for the RE305 v1 */
2814 "{product_name:RE305,product_ver:1.0.0,special_id:45550000}\n"
2815 "{product_name:RE305,product_ver:1.0.0,special_id:55530000}\n"
2816 "{product_name:RE305,product_ver:1.0.0,special_id:4a500000}\n"
2817 "{product_name:RE305,product_ver:1.0.0,special_id:42520000}\n"
2818 "{product_name:RE305,product_ver:1.0.0,special_id:4b520000}\n"
2819 "{product_name:RE305,product_ver:1.0.0,special_id:41550000}\n"
2820 "{product_name:RE305,product_ver:1.0.0,special_id:43410000}\n",
2822 .soft_ver
= SOFT_VER_DEFAULT
,
2825 {"fs-uboot", 0x00000, 0x20000},
2826 {"firmware", 0x20000, 0x5e0000},
2827 {"partition-table", 0x600000, 0x02000},
2828 {"default-mac", 0x610000, 0x00020},
2829 {"pin", 0x610100, 0x00020},
2830 {"product-info", 0x611100, 0x01000},
2831 {"soft-version", 0x620000, 0x01000},
2832 {"support-list", 0x621000, 0x01000},
2833 {"profile", 0x622000, 0x08000},
2834 {"user-config", 0x630000, 0x10000},
2835 {"default-config", 0x640000, 0x10000},
2836 {"radio", 0x7f0000, 0x10000},
2840 .first_sysupgrade_partition
= "os-image",
2841 .last_sysupgrade_partition
= "file-system"
2844 /** Firmware layout for the RE305 v3 */
2850 "{product_name:RE305,product_ver:3.0.0,special_id:00000000}\n"
2851 "{product_name:RE305,product_ver:3.0.0,special_id:45550000}\n"
2852 "{product_name:RE305,product_ver:3.0.0,special_id:4A500000}\n"
2853 "{product_name:RE305,product_ver:3.0.0,special_id:4B520000}\n"
2854 "{product_name:RE305,product_ver:3.0.0,special_id:41550000}\n"
2855 "{product_name:RE305,product_ver:3.0.0,special_id:42520000}\n"
2856 "{product_name:RE305,product_ver:3.0.0,special_id:55530000}\n"
2857 "{product_name:RE305,product_ver:3.0.0,special_id:45530000}\n"
2858 "{product_name:RE305,product_ver:3.0.0,special_id:41530000}\n"
2859 "{product_name:RE305,product_ver:3.0.0,special_id:43410000}\n"
2860 "{product_name:RE305,product_ver:3.0.0,special_id:52550000}\n",
2862 .soft_ver
= SOFT_VER_TEXT("soft_ver:2.0.0\n"),
2865 {"fs-uboot", 0x00000, 0x20000},
2866 {"firmware", 0x20000, 0x7a0000},
2867 {"partition-table", 0x7c0000, 0x02000},
2868 {"default-mac", 0x7c2000, 0x00020},
2869 {"pin", 0x7c2100, 0x00020},
2870 {"product-info", 0x7c3100, 0x01000},
2871 {"soft-version", 0x7c4200, 0x01000},
2872 {"support-list", 0x7c5200, 0x01000},
2873 {"profile", 0x7c6200, 0x08000},
2874 {"config-info", 0x7ce200, 0x00400},
2875 {"user-config", 0x7d0000, 0x10000},
2876 {"default-config", 0x7e0000, 0x10000},
2877 {"radio", 0x7f0000, 0x10000},
2881 .first_sysupgrade_partition
= "os-image",
2882 .last_sysupgrade_partition
= "file-system"
2885 /** Firmware layout for the RE350 v1 */
2891 "{product_name:RE350,product_ver:1.0.0,special_id:45550000}\n"
2892 "{product_name:RE350,product_ver:1.0.0,special_id:00000000}\n"
2893 "{product_name:RE350,product_ver:1.0.0,special_id:41550000}\n"
2894 "{product_name:RE350,product_ver:1.0.0,special_id:55530000}\n"
2895 "{product_name:RE350,product_ver:1.0.0,special_id:43410000}\n"
2896 "{product_name:RE350,product_ver:1.0.0,special_id:4b520000}\n"
2897 "{product_name:RE350,product_ver:1.0.0,special_id:4a500000}\n",
2899 .soft_ver
= SOFT_VER_DEFAULT
,
2901 /** We're using a dynamic kernel/rootfs split here */
2903 {"fs-uboot", 0x00000, 0x20000},
2904 {"firmware", 0x20000, 0x5e0000},
2905 {"partition-table", 0x600000, 0x02000},
2906 {"default-mac", 0x610000, 0x00020},
2907 {"pin", 0x610100, 0x00020},
2908 {"product-info", 0x611100, 0x01000},
2909 {"soft-version", 0x620000, 0x01000},
2910 {"support-list", 0x621000, 0x01000},
2911 {"profile", 0x622000, 0x08000},
2912 {"user-config", 0x630000, 0x10000},
2913 {"default-config", 0x640000, 0x10000},
2914 {"radio", 0x7f0000, 0x10000},
2918 .first_sysupgrade_partition
= "os-image",
2919 .last_sysupgrade_partition
= "file-system"
2922 /** Firmware layout for the RE350K v1 */
2928 "{product_name:RE350K,product_ver:1.0.0,special_id:00000000,product_region:US}\n",
2930 .soft_ver
= SOFT_VER_DEFAULT
,
2932 /** We're using a dynamic kernel/rootfs split here */
2934 {"fs-uboot", 0x00000, 0x20000},
2935 {"firmware", 0x20000, 0xd70000},
2936 {"partition-table", 0xd90000, 0x02000},
2937 {"default-mac", 0xda0000, 0x00020},
2938 {"pin", 0xda0100, 0x00020},
2939 {"product-info", 0xda1100, 0x01000},
2940 {"soft-version", 0xdb0000, 0x01000},
2941 {"support-list", 0xdb1000, 0x01000},
2942 {"profile", 0xdb2000, 0x08000},
2943 {"user-config", 0xdc0000, 0x10000},
2944 {"default-config", 0xdd0000, 0x10000},
2945 {"device-id", 0xde0000, 0x00108},
2946 {"radio", 0xff0000, 0x10000},
2950 .first_sysupgrade_partition
= "os-image",
2951 .last_sysupgrade_partition
= "file-system"
2954 /** Firmware layout for the RE355 */
2960 "{product_name:RE355,product_ver:1.0.0,special_id:00000000}\r\n"
2961 "{product_name:RE355,product_ver:1.0.0,special_id:55530000}\r\n"
2962 "{product_name:RE355,product_ver:1.0.0,special_id:45550000}\r\n"
2963 "{product_name:RE355,product_ver:1.0.0,special_id:4A500000}\r\n"
2964 "{product_name:RE355,product_ver:1.0.0,special_id:43410000}\r\n"
2965 "{product_name:RE355,product_ver:1.0.0,special_id:41550000}\r\n"
2966 "{product_name:RE355,product_ver:1.0.0,special_id:4B520000}\r\n"
2967 "{product_name:RE355,product_ver:1.0.0,special_id:55534100}\r\n",
2969 .soft_ver
= SOFT_VER_DEFAULT
,
2971 /* We're using a dynamic kernel/rootfs split here */
2973 {"fs-uboot", 0x00000, 0x20000},
2974 {"firmware", 0x20000, 0x5e0000},
2975 {"partition-table", 0x600000, 0x02000},
2976 {"default-mac", 0x610000, 0x00020},
2977 {"pin", 0x610100, 0x00020},
2978 {"product-info", 0x611100, 0x01000},
2979 {"soft-version", 0x620000, 0x01000},
2980 {"support-list", 0x621000, 0x01000},
2981 {"profile", 0x622000, 0x08000},
2982 {"user-config", 0x630000, 0x10000},
2983 {"default-config", 0x640000, 0x10000},
2984 {"radio", 0x7f0000, 0x10000},
2988 .first_sysupgrade_partition
= "os-image",
2989 .last_sysupgrade_partition
= "file-system"
2992 /** Firmware layout for the RE365 v1 */
2998 "{product_name:RE365,product_ver:1.0.0,special_id:45550000}\r\n"
2999 "{product_name:RE365,product_ver:1.0.0,special_id:55530000}\r\n"
3000 "{product_name:RE365,product_ver:1.0.0,special_id:4a500000}\r\n"
3001 "{product_name:RE365,product_ver:1.0.0,special_id:42520000}\r\n"
3002 "{product_name:RE365,product_ver:1.0.0,special_id:4b520000}\r\n"
3003 "{product_name:RE365,product_ver:1.0.0,special_id:41550000}\r\n"
3004 "{product_name:RE365,product_ver:1.0.0,special_id:43410000}\r\n"
3005 "{product_name:RE365,product_ver:1.0.0,special_id:54570000}\r\n"
3006 "{product_name:RE365,product_ver:1.0.0,special_id:41530000}\r\n",
3008 .soft_ver
= SOFT_VER_DEFAULT
,
3011 {"fs-uboot", 0x00000, 0x20000},
3012 {"firmware", 0x20000, 0x5e0000},
3013 {"partition-table", 0x600000, 0x02000},
3014 {"default-mac", 0x610000, 0x00020},
3015 {"pin", 0x610100, 0x00020},
3016 {"product-info", 0x611100, 0x01000},
3017 {"soft-version", 0x620000, 0x01000},
3018 {"support-list", 0x621000, 0x01000},
3019 {"profile", 0x622000, 0x08000},
3020 {"user-config", 0x630000, 0x10000},
3021 {"default-config", 0x640000, 0x10000},
3022 {"radio", 0x7f0000, 0x10000},
3026 .first_sysupgrade_partition
= "os-image",
3027 .last_sysupgrade_partition
= "file-system"
3030 /** Firmware layout for the RE450 */
3036 "{product_name:RE450,product_ver:1.0.0,special_id:00000000}\r\n"
3037 "{product_name:RE450,product_ver:1.0.0,special_id:55530000}\r\n"
3038 "{product_name:RE450,product_ver:1.0.0,special_id:45550000}\r\n"
3039 "{product_name:RE450,product_ver:1.0.0,special_id:4A500000}\r\n"
3040 "{product_name:RE450,product_ver:1.0.0,special_id:43410000}\r\n"
3041 "{product_name:RE450,product_ver:1.0.0,special_id:41550000}\r\n"
3042 "{product_name:RE450,product_ver:1.0.0,special_id:4B520000}\r\n"
3043 "{product_name:RE450,product_ver:1.0.0,special_id:55534100}\r\n",
3045 .soft_ver
= SOFT_VER_DEFAULT
,
3047 /** We're using a dynamic kernel/rootfs split here */
3049 {"fs-uboot", 0x00000, 0x20000},
3050 {"firmware", 0x20000, 0x5e0000},
3051 {"partition-table", 0x600000, 0x02000},
3052 {"default-mac", 0x610000, 0x00020},
3053 {"pin", 0x610100, 0x00020},
3054 {"product-info", 0x611100, 0x01000},
3055 {"soft-version", 0x620000, 0x01000},
3056 {"support-list", 0x621000, 0x01000},
3057 {"profile", 0x622000, 0x08000},
3058 {"user-config", 0x630000, 0x10000},
3059 {"default-config", 0x640000, 0x10000},
3060 {"radio", 0x7f0000, 0x10000},
3064 .first_sysupgrade_partition
= "os-image",
3065 .last_sysupgrade_partition
= "file-system"
3068 /** Firmware layout for the RE450 v2 */
3074 "{product_name:RE450,product_ver:2.0.0,special_id:00000000}\r\n"
3075 "{product_name:RE450,product_ver:2.0.0,special_id:55530000}\r\n"
3076 "{product_name:RE450,product_ver:2.0.0,special_id:45550000}\r\n"
3077 "{product_name:RE450,product_ver:2.0.0,special_id:4A500000}\r\n"
3078 "{product_name:RE450,product_ver:2.0.0,special_id:43410000}\r\n"
3079 "{product_name:RE450,product_ver:2.0.0,special_id:41550000}\r\n"
3080 "{product_name:RE450,product_ver:2.0.0,special_id:41530000}\r\n"
3081 "{product_name:RE450,product_ver:2.0.0,special_id:4B520000}\r\n"
3082 "{product_name:RE450,product_ver:2.0.0,special_id:42520000}\r\n",
3084 .soft_ver
= SOFT_VER_DEFAULT
,
3086 /* We're using a dynamic kernel/rootfs split here */
3088 {"fs-uboot", 0x00000, 0x20000},
3089 {"firmware", 0x20000, 0x5e0000},
3090 {"partition-table", 0x600000, 0x02000},
3091 {"default-mac", 0x610000, 0x00020},
3092 {"pin", 0x610100, 0x00020},
3093 {"product-info", 0x611100, 0x01000},
3094 {"soft-version", 0x620000, 0x01000},
3095 {"support-list", 0x621000, 0x01000},
3096 {"profile", 0x622000, 0x08000},
3097 {"user-config", 0x630000, 0x10000},
3098 {"default-config", 0x640000, 0x10000},
3099 {"radio", 0x7f0000, 0x10000},
3103 .first_sysupgrade_partition
= "os-image",
3104 .last_sysupgrade_partition
= "file-system"
3107 /** Firmware layout for the RE450 v3 */
3113 "{product_name:RE450,product_ver:3.0.0,special_id:00000000}\r\n"
3114 "{product_name:RE450,product_ver:3.0.0,special_id:55530000}\r\n"
3115 "{product_name:RE450,product_ver:3.0.0,special_id:45550000}\r\n"
3116 "{product_name:RE450,product_ver:3.0.0,special_id:4A500000}\r\n"
3117 "{product_name:RE450,product_ver:3.0.0,special_id:43410000}\r\n"
3118 "{product_name:RE450,product_ver:3.0.0,special_id:41550000}\r\n"
3119 "{product_name:RE450,product_ver:3.0.0,special_id:41530000}\r\n"
3120 "{product_name:RE450,product_ver:3.0.0,special_id:4B520000}\r\n"
3121 "{product_name:RE450,product_ver:3.0.0,special_id:42520000}\r\n",
3123 .soft_ver
= SOFT_VER_DEFAULT
,
3125 /* We're using a dynamic kernel/rootfs split here */
3127 {"fs-uboot", 0x00000, 0x20000},
3128 {"default-mac", 0x20000, 0x00020},
3129 {"pin", 0x20020, 0x00020},
3130 {"product-info", 0x21000, 0x01000},
3131 {"partition-table", 0x22000, 0x02000},
3132 {"soft-version", 0x24000, 0x01000},
3133 {"support-list", 0x25000, 0x01000},
3134 {"profile", 0x26000, 0x08000},
3135 {"user-config", 0x2e000, 0x10000},
3136 {"default-config", 0x3e000, 0x10000},
3137 {"config-info", 0x4e000, 0x00400},
3138 {"firmware", 0x50000, 0x7a0000},
3139 {"radio", 0x7f0000, 0x10000},
3143 .first_sysupgrade_partition
= "os-image",
3144 .last_sysupgrade_partition
= "file-system"
3147 /** Firmware layout for the RE455 v1 */
3153 "{product_name:RE455,product_ver:1.0.0,special_id:00000000}\r\n"
3154 "{product_name:RE455,product_ver:1.0.0,special_id:55530000}\r\n"
3155 "{product_name:RE455,product_ver:1.0.0,special_id:45550000}\r\n"
3156 "{product_name:RE455,product_ver:1.0.0,special_id:4A500000}\r\n"
3157 "{product_name:RE455,product_ver:1.0.0,special_id:43410000}\r\n"
3158 "{product_name:RE455,product_ver:1.0.0,special_id:41550000}\r\n"
3159 "{product_name:RE455,product_ver:1.0.0,special_id:41530000}\r\n"
3160 "{product_name:RE455,product_ver:1.0.0,special_id:4B520000}\r\n"
3161 "{product_name:RE455,product_ver:1.0.0,special_id:42520000}\r\n",
3163 .soft_ver
= SOFT_VER_DEFAULT
,
3165 /* We're using a dynamic kernel/rootfs split here */
3167 {"fs-uboot", 0x00000, 0x20000},
3168 {"default-mac", 0x20000, 0x00020},
3169 {"pin", 0x20020, 0x00020},
3170 {"product-info", 0x21000, 0x01000},
3171 {"partition-table", 0x22000, 0x02000},
3172 {"soft-version", 0x24000, 0x01000},
3173 {"support-list", 0x25000, 0x01000},
3174 {"profile", 0x26000, 0x08000},
3175 {"user-config", 0x2e000, 0x10000},
3176 {"default-config", 0x3e000, 0x10000},
3177 {"config-info", 0x4e000, 0x00400},
3178 {"firmware", 0x50000, 0x7a0000},
3179 {"radio", 0x7f0000, 0x10000},
3183 .first_sysupgrade_partition
= "os-image",
3184 .last_sysupgrade_partition
= "file-system"
3187 /** Firmware layout for the RE500 */
3193 "{product_name:RE500,product_ver:1.0.0,special_id:00000000}\r\n"
3194 "{product_name:RE500,product_ver:1.0.0,special_id:55530000}\r\n"
3195 "{product_name:RE500,product_ver:1.0.0,special_id:45550000}\r\n"
3196 "{product_name:RE500,product_ver:1.0.0,special_id:4A500000}\r\n"
3197 "{product_name:RE500,product_ver:1.0.0,special_id:43410000}\r\n"
3198 "{product_name:RE500,product_ver:1.0.0,special_id:41550000}\r\n"
3199 "{product_name:RE500,product_ver:1.0.0,special_id:41530000}\r\n",
3201 .soft_ver
= SOFT_VER_DEFAULT
,
3203 /* We're using a dynamic kernel/rootfs split here */
3205 {"fs-uboot", 0x00000, 0x20000},
3206 {"firmware", 0x20000, 0xde0000},
3207 {"partition-table", 0xe00000, 0x02000},
3208 {"default-mac", 0xe10000, 0x00020},
3209 {"pin", 0xe10100, 0x00020},
3210 {"product-info", 0xe11100, 0x01000},
3211 {"soft-version", 0xe20000, 0x01000},
3212 {"support-list", 0xe21000, 0x01000},
3213 {"profile", 0xe22000, 0x08000},
3214 {"user-config", 0xe30000, 0x10000},
3215 {"default-config", 0xe40000, 0x10000},
3216 {"radio", 0xff0000, 0x10000},
3220 .first_sysupgrade_partition
= "os-image",
3221 .last_sysupgrade_partition
= "file-system"
3224 /** Firmware layout for the RE650 */
3230 "{product_name:RE650,product_ver:1.0.0,special_id:00000000}\r\n"
3231 "{product_name:RE650,product_ver:1.0.0,special_id:55530000}\r\n"
3232 "{product_name:RE650,product_ver:1.0.0,special_id:45550000}\r\n"
3233 "{product_name:RE650,product_ver:1.0.0,special_id:4A500000}\r\n"
3234 "{product_name:RE650,product_ver:1.0.0,special_id:43410000}\r\n"
3235 "{product_name:RE650,product_ver:1.0.0,special_id:41550000}\r\n"
3236 "{product_name:RE650,product_ver:1.0.0,special_id:41530000}\r\n",
3238 .soft_ver
= SOFT_VER_DEFAULT
,
3240 /* We're using a dynamic kernel/rootfs split here */
3242 {"fs-uboot", 0x00000, 0x20000},
3243 {"firmware", 0x20000, 0xde0000},
3244 {"partition-table", 0xe00000, 0x02000},
3245 {"default-mac", 0xe10000, 0x00020},
3246 {"pin", 0xe10100, 0x00020},
3247 {"product-info", 0xe11100, 0x01000},
3248 {"soft-version", 0xe20000, 0x01000},
3249 {"support-list", 0xe21000, 0x01000},
3250 {"profile", 0xe22000, 0x08000},
3251 {"user-config", 0xe30000, 0x10000},
3252 {"default-config", 0xe40000, 0x10000},
3253 {"radio", 0xff0000, 0x10000},
3257 .first_sysupgrade_partition
= "os-image",
3258 .last_sysupgrade_partition
= "file-system"
3260 /** Firmware layout for the RE650 V2 (8MB Flash)*/
3266 "{product_name:RE650,product_ver:2.0.0,special_id:00000000}\n"
3267 "{product_name:RE650,product_ver:2.0.0,special_id:45550000}\n"
3268 "{product_name:RE650,product_ver:2.0.0,special_id:4A500000}\n"
3269 "{product_name:RE650,product_ver:2.0.0,special_id:41550000}\n"
3270 "{product_name:RE650,product_ver:2.0.0,special_id:43410000}\n"
3271 "{product_name:RE650,product_ver:2.0.0,special_id:41530000}\n"
3272 "{product_name:RE650,product_ver:2.0.0,special_id:55530000}\n",
3274 /* For RE650 v2, soft ver is required, otherwise OEM install doesn't work */
3275 .soft_ver
= SOFT_VER_TEXT("soft_ver:2.0.0\n"),
3277 /* We're using a dynamic kernel/rootfs split here */
3279 {"fs-uboot", 0x00000, 0x20000},
3280 {"firmware", 0x20000, 0x7a0000},
3281 {"partition-table", 0x7c0000, 0x02000},
3282 {"default-mac", 0x7c2000, 0x00020},
3283 {"pin", 0x7c2100, 0x00020},
3284 {"product-info", 0x7c3100, 0x01000},
3285 {"soft-version", 0x7c4200, 0x01000},
3286 {"support-list", 0x7c5200, 0x01000},
3287 {"profile", 0x7c6200, 0x08000},
3288 {"config-info", 0x7ce200, 0x00400},
3289 {"user-config", 0x7d0000, 0x10000},
3290 {"default-config", 0x7e0000, 0x10000},
3291 {"radio", 0x7f0000, 0x10000},
3295 .first_sysupgrade_partition
= "os-image",
3296 .last_sysupgrade_partition
= "file-system"
3299 /** Firmware layout for the Mercusys MR70X */
3305 "{product_name:MR70X,product_ver:1.0.0,special_id:45550000}\n"
3306 "{product_name:MR70X,product_ver:1.0.0,special_id:4A500000}\n"
3307 "{product_name:MR70X,product_ver:1.0.0,special_id:55530000}\n",
3309 .soft_ver
= SOFT_VER_DEFAULT
,
3312 {"fs-uboot", 0x00000, 0x40000},
3313 {"firmware", 0x40000, 0xf60000},
3314 {"default-mac", 0xfa0000, 0x00200},
3315 {"pin", 0xfa0200, 0x00100},
3316 {"device-id", 0xfa0300, 0x00100},
3317 {"product-info", 0xfa0400, 0x0fc00},
3318 {"default-config", 0xfb0000, 0x08000},
3319 {"ap-def-config", 0xfb8000, 0x08000},
3320 {"user-config", 0xfc0000, 0x0a000},
3321 {"ag-config", 0xfca000, 0x04000},
3322 {"certificate", 0xfce000, 0x02000},
3323 {"ap-config", 0xfd0000, 0x06000},
3324 {"router-config", 0xfd6000, 0x06000},
3325 {"favicon", 0xfdc000, 0x02000},
3326 {"logo", 0xfde000, 0x02000},
3327 {"partition-table", 0xfe0000, 0x00800},
3328 {"soft-version", 0xfe0800, 0x00100},
3329 {"support-list", 0xfe0900, 0x00200},
3330 {"profile", 0xfe0b00, 0x03000},
3331 {"extra-para", 0xfe3b00, 0x00100},
3332 {"radio", 0xff0000, 0x10000},
3336 .first_sysupgrade_partition
= "os-image",
3337 .last_sysupgrade_partition
= "file-system"
3343 #define error(_ret, _errno, _str, ...) \
3345 fprintf(stderr, _str ": %s\n", ## __VA_ARGS__, \
3346 strerror(_errno)); \
3352 /** Stores a uint32 as big endian */
3353 static inline void put32(uint8_t *buf
, uint32_t val
) {
3360 static inline bool meta_partition_should_pad(enum partition_trail_value pv
)
3362 return (pv
>= 0) && (pv
<= PART_TRAIL_MAX
);
3365 /** Allocate a padded meta partition with a correctly initialised header
3366 * If the `data` pointer is NULL, then the required space is only allocated,
3367 * otherwise `data_len` bytes will be copied from `data` into the partition
3369 static struct image_partition_entry
init_meta_partition_entry(
3370 const char *name
, const void *data
, uint32_t data_len
,
3371 enum partition_trail_value pad_value
)
3373 uint32_t total_len
= sizeof(struct meta_header
) + data_len
;
3374 if (meta_partition_should_pad(pad_value
))
3377 struct image_partition_entry entry
= {
3380 .data
= malloc(total_len
)
3383 error(1, errno
, "failed to allocate meta partition entry");
3385 struct meta_header
*header
= (struct meta_header
*)entry
.data
;
3386 header
->length
= htonl(data_len
);
3390 memcpy(entry
.data
+sizeof(*header
), data
, data_len
);
3392 if (meta_partition_should_pad(pad_value
))
3393 entry
.data
[total_len
- 1] = (uint8_t) pad_value
;
3398 /** Allocates a new image partition */
3399 static struct image_partition_entry
alloc_image_partition(const char *name
, size_t len
) {
3400 struct image_partition_entry entry
= {name
, len
, malloc(len
)};
3402 error(1, errno
, "malloc");
3407 /** Sets up default partition names whenever custom names aren't specified */
3408 static void set_partition_names(struct device_info
*info
)
3410 if (!info
->partition_names
.partition_table
)
3411 info
->partition_names
.partition_table
= "partition-table";
3412 if (!info
->partition_names
.soft_ver
)
3413 info
->partition_names
.soft_ver
= "soft-version";
3414 if (!info
->partition_names
.os_image
)
3415 info
->partition_names
.os_image
= "os-image";
3416 if (!info
->partition_names
.support_list
)
3417 info
->partition_names
.support_list
= "support-list";
3418 if (!info
->partition_names
.file_system
)
3419 info
->partition_names
.file_system
= "file-system";
3420 if (!info
->partition_names
.extra_para
)
3421 info
->partition_names
.extra_para
= "extra-para";
3424 /** Frees an image partition */
3425 static void free_image_partition(struct image_partition_entry
*entry
)
3427 void *data
= entry
->data
;
3436 static time_t source_date_epoch
= -1;
3437 static void set_source_date_epoch() {
3438 char *env
= getenv("SOURCE_DATE_EPOCH");
3442 source_date_epoch
= strtoull(env
, &endptr
, 10);
3443 if (errno
|| (endptr
&& *endptr
!= '\0')) {
3444 fprintf(stderr
, "Invalid SOURCE_DATE_EPOCH");
3450 /** Generates the partition-table partition */
3451 static struct image_partition_entry
make_partition_table(const struct device_info
*p
)
3453 struct image_partition_entry entry
= alloc_image_partition(p
->partition_names
.partition_table
, SAFELOADER_PAYLOAD_TABLE_SIZE
);
3455 char *s
= (char *)entry
.data
, *end
= (char *)(s
+entry
.size
);
3463 for (i
= 0; p
->partitions
[i
].name
; i
++) {
3465 size_t w
= snprintf(s
, len
, "partition %s base 0x%05x size 0x%05x\n",
3466 p
->partitions
[i
].name
, p
->partitions
[i
].base
, p
->partitions
[i
].size
);
3469 error(1, 0, "flash partition table overflow?");
3476 memset(s
, 0xff, end
-s
);
3482 /** Generates a binary-coded decimal representation of an integer in the range [0, 99] */
3483 static inline uint8_t bcd(uint8_t v
) {
3484 return 0x10 * (v
/10) + v
%10;
3488 /** Generates the soft-version partition */
3489 static struct image_partition_entry
make_soft_version(const struct device_info
*info
, uint32_t rev
)
3491 /** If an info string is provided, use this instead of
3492 * the structured data, and include the null-termination */
3493 if (info
->soft_ver
.type
== SOFT_VER_TYPE_TEXT
) {
3494 uint32_t len
= strlen(info
->soft_ver
.text
) + 1;
3495 return init_meta_partition_entry(info
->partition_names
.soft_ver
,
3496 info
->soft_ver
.text
, len
, info
->part_trail
);
3501 if (source_date_epoch
!= -1)
3502 t
= source_date_epoch
;
3503 else if (time(&t
) == (time_t)(-1))
3504 error(1, errno
, "time");
3506 struct tm
*tm
= gmtime(&t
);
3508 struct soft_version s
= {
3511 .version_major
= info
->soft_ver
.num
[0],
3512 .version_minor
= info
->soft_ver
.num
[1],
3513 .version_patch
= info
->soft_ver
.num
[2],
3515 .year_hi
= bcd((1900+tm
->tm_year
)/100),
3516 .year_lo
= bcd(tm
->tm_year
%100),
3517 .month
= bcd(tm
->tm_mon
+1),
3518 .day
= bcd(tm
->tm_mday
),
3521 .compat_level
= htonl(info
->soft_ver_compat_level
)
3524 if (info
->soft_ver_compat_level
== 0)
3525 return init_meta_partition_entry(info
->partition_names
.soft_ver
, &s
,
3526 (uint8_t *)(&s
.compat_level
) - (uint8_t *)(&s
),
3529 return init_meta_partition_entry(info
->partition_names
.soft_ver
, &s
,
3530 sizeof(s
), info
->part_trail
);
3533 /** Generates the support-list partition */
3534 static struct image_partition_entry
make_support_list(
3535 const struct device_info
*info
)
3537 uint32_t len
= strlen(info
->support_list
);
3538 return init_meta_partition_entry(info
->partition_names
.support_list
, info
->support_list
,
3539 len
, info
->part_trail
);
3542 /** Partition with extra-para data */
3543 static struct image_partition_entry
make_extra_para(
3544 const struct device_info
*info
, const uint8_t *extra_para
, size_t len
)
3546 return init_meta_partition_entry(info
->partition_names
.extra_para
, extra_para
, len
,
3550 /** Creates a new image partition with an arbitrary name from a file */
3551 static struct image_partition_entry
read_file(const char *part_name
, const char *filename
, bool add_jffs2_eof
, struct flash_partition_entry
*file_system_partition
) {
3552 struct stat statbuf
;
3554 if (stat(filename
, &statbuf
) < 0)
3555 error(1, errno
, "unable to stat file `%s'", filename
);
3557 size_t len
= statbuf
.st_size
;
3559 if (add_jffs2_eof
) {
3560 if (file_system_partition
)
3561 len
= ALIGN(len
+ file_system_partition
->base
, 0x10000) + sizeof(jffs2_eof_mark
) - file_system_partition
->base
;
3563 len
= ALIGN(len
, 0x10000) + sizeof(jffs2_eof_mark
);
3566 struct image_partition_entry entry
= alloc_image_partition(part_name
, len
);
3568 FILE *file
= fopen(filename
, "rb");
3570 error(1, errno
, "unable to open file `%s'", filename
);
3572 if (fread(entry
.data
, statbuf
.st_size
, 1, file
) != 1)
3573 error(1, errno
, "unable to read file `%s'", filename
);
3575 if (add_jffs2_eof
) {
3576 uint8_t *eof
= entry
.data
+ statbuf
.st_size
, *end
= entry
.data
+entry
.size
;
3578 memset(eof
, 0xff, end
- eof
- sizeof(jffs2_eof_mark
));
3579 memcpy(end
- sizeof(jffs2_eof_mark
), jffs2_eof_mark
, sizeof(jffs2_eof_mark
));
3588 Copies a list of image partitions into an image buffer and generates the image partition table while doing so
3590 Example image partition table:
3592 fwup-ptn partition-table base 0x00800 size 0x00800
3593 fwup-ptn os-image base 0x01000 size 0x113b45
3594 fwup-ptn file-system base 0x114b45 size 0x1d0004
3595 fwup-ptn support-list base 0x2e4b49 size 0x000d1
3597 Each line of the partition table is terminated with the bytes 09 0d 0a ("\t\r\n"),
3598 the end of the partition table is marked with a zero byte.
3600 The firmware image must contain at least the partition-table and support-list partitions
3601 to be accepted. There aren't any alignment constraints for the image partitions.
3603 The partition-table partition contains the actual flash layout; partitions
3604 from the image partition table are mapped to the corresponding flash partitions during
3605 the firmware upgrade. The support-list partition contains a list of devices supported by
3608 The base offsets in the firmware partition table are relative to the end
3609 of the vendor information block, so the partition-table partition will
3610 actually start at offset 0x1814 of the image.
3612 I think partition-table must be the first partition in the firmware image.
3614 static void put_partitions(uint8_t *buffer
, const struct flash_partition_entry
*flash_parts
, const struct image_partition_entry
*parts
) {
3616 char *image_pt
= (char *)buffer
, *end
= image_pt
+ SAFELOADER_PAYLOAD_TABLE_SIZE
;
3618 size_t base
= SAFELOADER_PAYLOAD_TABLE_SIZE
;
3619 for (i
= 0; parts
[i
].name
; i
++) {
3620 for (j
= 0; flash_parts
[j
].name
; j
++) {
3621 if (!strcmp(flash_parts
[j
].name
, parts
[i
].name
)) {
3622 if (parts
[i
].size
> flash_parts
[j
].size
)
3623 error(1, 0, "%s partition too big (more than %u bytes)", flash_parts
[j
].name
, (unsigned)flash_parts
[j
].size
);
3628 assert(flash_parts
[j
].name
);
3630 memcpy(buffer
+ base
, parts
[i
].data
, parts
[i
].size
);
3632 size_t len
= end
-image_pt
;
3633 size_t w
= snprintf(image_pt
, len
, "fwup-ptn %s base 0x%05x size 0x%05x\t\r\n", parts
[i
].name
, (unsigned)base
, (unsigned)parts
[i
].size
);
3636 error(1, 0, "image partition table overflow?");
3640 base
+= parts
[i
].size
;
3644 /** Generates and writes the image MD5 checksum */
3645 static void put_md5(uint8_t *md5
, uint8_t *buffer
, unsigned int len
) {
3649 MD5_Update(&ctx
, md5_salt
, (unsigned int)sizeof(md5_salt
));
3650 MD5_Update(&ctx
, buffer
, len
);
3651 MD5_Final(md5
, &ctx
);
3656 Generates the firmware image in factory format
3662 0000-0003 Image size (4 bytes, big endian)
3663 0004-0013 MD5 hash (hash of a 16 byte salt and the image data starting with byte 0x14)
3664 0014-0017 Vendor information length (without padding) (4 bytes, big endian)
3665 0018-1013 Vendor information (4092 bytes, padded with 0xff; there seem to be older
3666 (VxWorks-based) TP-LINK devices which use a smaller vendor information block)
3667 1014-1813 Image partition table (2048 bytes, padded with 0xff)
3668 1814-xxxx Firmware partitions
3670 static void * generate_factory_image(struct device_info
*info
, const struct image_partition_entry
*parts
, size_t *len
) {
3671 *len
= SAFELOADER_PAYLOAD_OFFSET
+ SAFELOADER_PAYLOAD_TABLE_SIZE
;
3674 for (i
= 0; parts
[i
].name
; i
++)
3675 *len
+= parts
[i
].size
;
3677 uint8_t *image
= malloc(*len
);
3679 error(1, errno
, "malloc");
3681 memset(image
, 0xff, *len
);
3685 size_t vendor_len
= strlen(info
->vendor
);
3686 put32(image
+ SAFELOADER_PREAMBLE_SIZE
, vendor_len
);
3687 memcpy(image
+ SAFELOADER_PREAMBLE_SIZE
+ 0x4, info
->vendor
, vendor_len
);
3690 put_partitions(image
+ SAFELOADER_PAYLOAD_OFFSET
, info
->partitions
, parts
);
3691 put_md5(image
+ 0x04, image
+ SAFELOADER_PREAMBLE_SIZE
, *len
- SAFELOADER_PREAMBLE_SIZE
);
3697 Generates the firmware image in sysupgrade format
3699 This makes some assumptions about the provided flash and image partition tables and
3700 should be generalized when TP-LINK starts building its safeloader into hardware with
3701 different flash layouts.
3703 static void * generate_sysupgrade_image(struct device_info
*info
, const struct image_partition_entry
*image_parts
, size_t *len
) {
3705 size_t flash_first_partition_index
= 0;
3706 size_t flash_last_partition_index
= 0;
3707 const struct flash_partition_entry
*flash_first_partition
= NULL
;
3708 const struct flash_partition_entry
*flash_last_partition
= NULL
;
3709 const struct image_partition_entry
*image_last_partition
= NULL
;
3711 /** Find first and last partitions */
3712 for (i
= 0; info
->partitions
[i
].name
; i
++) {
3713 if (!strcmp(info
->partitions
[i
].name
, info
->first_sysupgrade_partition
)) {
3714 flash_first_partition
= &info
->partitions
[i
];
3715 flash_first_partition_index
= i
;
3716 } else if (!strcmp(info
->partitions
[i
].name
, info
->last_sysupgrade_partition
)) {
3717 flash_last_partition
= &info
->partitions
[i
];
3718 flash_last_partition_index
= i
;
3722 assert(flash_first_partition
&& flash_last_partition
);
3723 assert(flash_first_partition_index
< flash_last_partition_index
);
3725 /** Find last partition from image to calculate needed size */
3726 for (i
= 0; image_parts
[i
].name
; i
++) {
3727 if (!strcmp(image_parts
[i
].name
, info
->last_sysupgrade_partition
)) {
3728 image_last_partition
= &image_parts
[i
];
3733 assert(image_last_partition
);
3735 *len
= flash_last_partition
->base
- flash_first_partition
->base
+ image_last_partition
->size
;
3737 uint8_t *image
= malloc(*len
);
3739 error(1, errno
, "malloc");
3741 memset(image
, 0xff, *len
);
3743 for (i
= flash_first_partition_index
; i
<= flash_last_partition_index
; i
++) {
3744 for (j
= 0; image_parts
[j
].name
; j
++) {
3745 if (!strcmp(info
->partitions
[i
].name
, image_parts
[j
].name
)) {
3746 if (image_parts
[j
].size
> info
->partitions
[i
].size
)
3747 error(1, 0, "%s partition too big (more than %u bytes)", info
->partitions
[i
].name
, (unsigned)info
->partitions
[i
].size
);
3748 memcpy(image
+ info
->partitions
[i
].base
- flash_first_partition
->base
, image_parts
[j
].data
, image_parts
[j
].size
);
3752 assert(image_parts
[j
].name
);
3759 /** Generates an image according to a given layout and writes it to a file */
3760 static void build_image(const char *output
,
3761 const char *kernel_image
,
3762 const char *rootfs_image
,
3766 struct device_info
*info
) {
3770 struct image_partition_entry parts
[7] = {};
3772 struct flash_partition_entry
*firmware_partition
= NULL
;
3773 struct flash_partition_entry
*os_image_partition
= NULL
;
3774 struct flash_partition_entry
*file_system_partition
= NULL
;
3775 size_t firmware_partition_index
= 0;
3777 set_partition_names(info
);
3779 for (i
= 0; info
->partitions
[i
].name
; i
++) {
3780 if (!strcmp(info
->partitions
[i
].name
, "firmware"))
3782 firmware_partition
= &info
->partitions
[i
];
3783 firmware_partition_index
= i
;
3787 if (firmware_partition
)
3789 os_image_partition
= &info
->partitions
[firmware_partition_index
];
3790 file_system_partition
= &info
->partitions
[firmware_partition_index
+ 1];
3793 if (stat(kernel_image
, &kernel
) < 0)
3794 error(1, errno
, "unable to stat file `%s'", kernel_image
);
3796 if (kernel
.st_size
> firmware_partition
->size
)
3797 error(1, 0, "kernel overflowed firmware partition\n");
3799 for (i
= MAX_PARTITIONS
-1; i
>= firmware_partition_index
+ 1; i
--)
3800 info
->partitions
[i
+1] = info
->partitions
[i
];
3802 file_system_partition
->name
= info
->partition_names
.file_system
;
3804 file_system_partition
->base
= firmware_partition
->base
+ kernel
.st_size
;
3806 /* Align partition start to erase blocks for factory images only */
3808 file_system_partition
->base
= ALIGN(firmware_partition
->base
+ kernel
.st_size
, 0x10000);
3810 file_system_partition
->size
= firmware_partition
->size
- file_system_partition
->base
;
3812 os_image_partition
->name
= info
->partition_names
.os_image
;
3814 os_image_partition
->size
= kernel
.st_size
;
3817 parts
[0] = make_partition_table(info
);
3818 parts
[1] = make_soft_version(info
, rev
);
3819 parts
[2] = make_support_list(info
);
3820 parts
[3] = read_file(info
->partition_names
.os_image
, kernel_image
, false, NULL
);
3821 parts
[4] = read_file(info
->partition_names
.file_system
, rootfs_image
, add_jffs2_eof
, file_system_partition
);
3824 /* Some devices need the extra-para partition to accept the firmware */
3825 if (strcasecmp(info
->id
, "ARCHER-A6-V3") == 0 ||
3826 strcasecmp(info
->id
, "ARCHER-A7-V5") == 0 ||
3827 strcasecmp(info
->id
, "ARCHER-A9-V6") == 0 ||
3828 strcasecmp(info
->id
, "ARCHER-AX23-V1") == 0 ||
3829 strcasecmp(info
->id
, "ARCHER-C2-V3") == 0 ||
3830 strcasecmp(info
->id
, "ARCHER-C7-V4") == 0 ||
3831 strcasecmp(info
->id
, "ARCHER-C7-V5") == 0 ||
3832 strcasecmp(info
->id
, "ARCHER-C25-V1") == 0 ||
3833 strcasecmp(info
->id
, "ARCHER-C59-V2") == 0 ||
3834 strcasecmp(info
->id
, "ARCHER-C60-V2") == 0 ||
3835 strcasecmp(info
->id
, "ARCHER-C60-V3") == 0 ||
3836 strcasecmp(info
->id
, "ARCHER-C6U-V1") == 0 ||
3837 strcasecmp(info
->id
, "ARCHER-C6-V3") == 0 ||
3838 strcasecmp(info
->id
, "DECO-M4R-V4") == 0 ||
3839 strcasecmp(info
->id
, "MR70X") == 0 ||
3840 strcasecmp(info
->id
, "TLWR1043NV5") == 0) {
3841 const uint8_t extra_para
[2] = {0x01, 0x00};
3842 parts
[5] = make_extra_para(info
, extra_para
,
3843 sizeof(extra_para
));
3844 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2") == 0 ||
3845 strcasecmp(info
->id
, "TL-WA1201-V2") == 0) {
3846 const uint8_t extra_para
[2] = {0x00, 0x01};
3847 parts
[5] = make_extra_para(info
, extra_para
,
3848 sizeof(extra_para
));
3849 } else if (strcasecmp(info
->id
, "ARCHER-C6-V2-US") == 0 ||
3850 strcasecmp(info
->id
, "EAP245-V3") == 0) {
3851 const uint8_t extra_para
[2] = {0x01, 0x01};
3852 parts
[5] = make_extra_para(info
, extra_para
,
3853 sizeof(extra_para
));
3859 image
= generate_sysupgrade_image(info
, parts
, &len
);
3861 image
= generate_factory_image(info
, parts
, &len
);
3863 FILE *file
= fopen(output
, "wb");
3865 error(1, errno
, "unable to open output file");
3867 if (fwrite(image
, len
, 1, file
) != 1)
3868 error(1, 0, "unable to write output file");
3874 for (i
= 0; parts
[i
].name
; i
++)
3875 free_image_partition(&parts
[i
]);
3879 static void usage(const char *argv0
) {
3881 "Usage: %s [OPTIONS...]\n"
3884 " -h show this help\n"
3886 "Info about an image:\n"
3887 " -i <file> input file to read from\n"
3888 "Create a new image:\n"
3889 " -B <board> create image for the board specified with <board>\n"
3890 " -k <file> read kernel image from the file <file>\n"
3891 " -r <file> read rootfs image from the file <file>\n"
3892 " -o <file> write output to the file <file>\n"
3893 " -V <rev> sets the revision number to <rev>\n"
3894 " -j add jffs2 end-of-filesystem markers\n"
3895 " -S create sysupgrade instead of factory image\n"
3896 "Extract an old image:\n"
3897 " -x <file> extract all oem firmware partition\n"
3898 " -d <dir> destination to extract the firmware partition\n"
3899 " -z <file> convert an oem firmware into a sysupgade file. Use -o for output file\n",
3905 static struct device_info
*find_board(const char *id
)
3907 struct device_info
*board
= NULL
;
3909 for (board
= boards
; board
->id
!= NULL
; board
++)
3910 if (strcasecmp(id
, board
->id
) == 0)
3916 static int add_flash_partition(
3917 struct flash_partition_entry
*part_list
,
3924 /* check if the list has a free entry */
3925 for (ptr
= 0; ptr
< max_entries
; ptr
++, part_list
++) {
3926 if (part_list
->name
== NULL
&&
3927 part_list
->base
== 0 &&
3928 part_list
->size
== 0)
3932 if (ptr
== max_entries
) {
3933 error(1, 0, "No free flash part entry available.");
3936 part_list
->name
= calloc(1, strlen(name
) + 1);
3937 if (!part_list
->name
) {
3938 error(1, 0, "Unable to allocate memory");
3941 memcpy((char *)part_list
->name
, name
, strlen(name
));
3942 part_list
->base
= base
;
3943 part_list
->size
= size
;
3948 /** read the partition table into struct flash_partition_entry */
3949 enum PARTITION_TABLE_TYPE
{
3950 PARTITION_TABLE_FWUP
,
3951 PARTITION_TABLE_FLASH
,
3954 static int read_partition_table(
3955 FILE *file
, long offset
,
3956 struct flash_partition_entry
*entries
, size_t max_entries
,
3959 char buf
[SAFELOADER_PAYLOAD_TABLE_SIZE
];
3961 const char *parthdr
= NULL
;
3962 const char *fwuphdr
= "fwup-ptn";
3963 const char *flashhdr
= "partition";
3965 /* TODO: search for the partition table */
3968 case PARTITION_TABLE_FWUP
:
3971 case PARTITION_TABLE_FLASH
:
3975 error(1, 0, "Invalid partition table");
3978 if (fseek(file
, offset
, SEEK_SET
) < 0)
3979 error(1, errno
, "Can not seek in the firmware");
3981 if (fread(buf
, sizeof(buf
), 1, file
) != 1)
3982 error(1, errno
, "Can not read fwup-ptn from the firmware");
3984 buf
[sizeof(buf
) - 1] = '\0';
3986 /* look for the partition header */
3987 if (memcmp(buf
, parthdr
, strlen(parthdr
)) != 0) {
3988 fprintf(stderr
, "DEBUG: can not find fwuphdr\n");
3993 end
= buf
+ sizeof(buf
);
3994 while ((ptr
+ strlen(parthdr
)) < end
&&
3995 memcmp(ptr
, parthdr
, strlen(parthdr
)) == 0) {
3999 char name
[32] = { 0 };
4001 unsigned long base
= 0;
4002 unsigned long size
= 0;
4004 end_part
= memchr(ptr
, '\n', (end
- ptr
));
4005 if (end_part
== NULL
) {
4006 /* in theory this should never happen, because a partition always ends with 0x09, 0x0D, 0x0A */
4010 for (int i
= 0; i
<= 4; i
++) {
4011 if (end_part
<= ptr
)
4014 end_element
= memchr(ptr
, 0x20, (end_part
- ptr
));
4015 if (end_element
== NULL
) {
4016 error(1, errno
, "Ignoring the rest of the partition entries.");
4021 /* partition header */
4023 ptr
= end_element
+ 1;
4027 name_len
= (end_element
- ptr
) > 31 ? 31 : (end_element
- ptr
);
4028 strncpy(name
, ptr
, name_len
);
4029 name
[name_len
] = '\0';
4030 ptr
= end_element
+ 1;
4035 ptr
= end_element
+ 1;
4040 base
= strtoul(ptr
, NULL
, 16);
4041 ptr
= end_element
+ 1;
4046 ptr
= end_element
+ 1;
4047 /* actual size. The last element doesn't have a sepeartor */
4048 size
= strtoul(ptr
, NULL
, 16);
4049 /* the part ends with 0x09, 0x0d, 0x0a */
4051 add_flash_partition(entries
, max_entries
, name
, base
, size
);
4060 static void safeloader_read_partition(FILE *input_file
, size_t payload_offset
,
4061 struct flash_partition_entry
*entry
,
4062 struct image_partition_entry
*part
)
4064 size_t part_size
= entry
->size
;
4065 void *part_data
= malloc(part_size
);
4067 if (fseek(input_file
, payload_offset
, SEEK_SET
))
4068 error(1, errno
, "Failed to seek to partition data");
4071 error(1, ENOMEM
, "Failed to allocate partition data");
4073 if (fread(part_data
, 1, part_size
, input_file
) < part_size
)
4074 error(1, errno
, "Failed to read partition data");
4076 part
->data
= part_data
;
4077 part
->size
= part_size
;
4078 part
->name
= entry
->name
;
4081 static void safeloader_parse_image(FILE *input_file
, struct safeloader_image_info
*image
)
4083 static const char *HEADER_ID_CLOUD
= "fw-type:Cloud";
4084 static const char *HEADER_ID_QNEW
= "?NEW";
4091 fseek(input_file
, SAFELOADER_PREAMBLE_SIZE
, SEEK_SET
);
4093 if (fread(buf
, sizeof(buf
), 1, input_file
) != 1)
4094 error(1, errno
, "Can not read image header");
4096 if (memcmp(HEADER_ID_QNEW
, &buf
[0], strlen(HEADER_ID_QNEW
)) == 0)
4097 image
->type
= SAFELOADER_TYPE_QNEW
;
4098 else if (memcmp(HEADER_ID_CLOUD
, &buf
[0], strlen(HEADER_ID_CLOUD
)) == 0)
4099 image
->type
= SAFELOADER_TYPE_CLOUD
;
4100 else if (ntohl(*((uint32_t *) &buf
[0])) <= SAFELOADER_HEADER_SIZE
)
4101 image
->type
= SAFELOADER_TYPE_VENDOR
;
4103 image
->type
= SAFELOADER_TYPE_DEFAULT
;
4105 switch (image
->type
) {
4106 case SAFELOADER_TYPE_DEFAULT
:
4107 case SAFELOADER_TYPE_VENDOR
:
4108 case SAFELOADER_TYPE_CLOUD
:
4109 image
->payload_offset
= SAFELOADER_PAYLOAD_OFFSET
;
4111 case SAFELOADER_TYPE_QNEW
:
4112 image
->payload_offset
= SAFELOADER_QNEW_PAYLOAD_OFFSET
;
4116 /* Parse image partition table */
4117 read_partition_table(input_file
, image
->payload_offset
, &image
->entries
[0],
4118 MAX_PARTITIONS
, PARTITION_TABLE_FWUP
);
4121 static void write_partition(
4123 size_t firmware_offset
,
4124 struct flash_partition_entry
*entry
,
4130 fseek(input_file
, entry
->base
+ firmware_offset
, SEEK_SET
);
4132 for (offset
= 0; sizeof(buf
) + offset
<= entry
->size
; offset
+= sizeof(buf
)) {
4133 if (fread(buf
, sizeof(buf
), 1, input_file
) != 1)
4134 error(1, errno
, "Can not read partition from input_file");
4136 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
4137 error(1, errno
, "Can not write partition to output_file");
4139 /* write last chunk smaller than buffer */
4140 if (offset
< entry
->size
) {
4141 offset
= entry
->size
- offset
;
4142 if (fread(buf
, offset
, 1, input_file
) != 1)
4143 error(1, errno
, "Can not read partition from input_file");
4144 if (fwrite(buf
, offset
, 1, output_file
) != 1)
4145 error(1, errno
, "Can not write partition to output_file");
4149 static int extract_firmware_partition(FILE *input_file
, size_t firmware_offset
, struct flash_partition_entry
*entry
, const char *output_directory
)
4152 char output
[PATH_MAX
];
4154 snprintf(output
, PATH_MAX
, "%s/%s", output_directory
, entry
->name
);
4155 output_file
= fopen(output
, "wb+");
4156 if (output_file
== NULL
) {
4157 error(1, errno
, "Can not open output file %s", output
);
4160 write_partition(input_file
, firmware_offset
, entry
, output_file
);
4162 fclose(output_file
);
4167 /** extract all partitions from the firmware file */
4168 static int extract_firmware(const char *input
, const char *output_directory
)
4170 struct safeloader_image_info info
= {};
4171 struct stat statbuf
;
4174 /* check input file */
4175 if (stat(input
, &statbuf
)) {
4176 error(1, errno
, "Can not read input firmware %s", input
);
4179 /* check if output directory exists */
4180 if (stat(output_directory
, &statbuf
)) {
4181 error(1, errno
, "Failed to stat output directory %s", output_directory
);
4184 if ((statbuf
.st_mode
& S_IFMT
) != S_IFDIR
) {
4185 error(1, errno
, "Given output directory is not a directory %s", output_directory
);
4188 input_file
= fopen(input
, "rb");
4189 safeloader_parse_image(input_file
, &info
);
4191 for (size_t i
= 0; i
< MAX_PARTITIONS
&& info
.entries
[i
].name
; i
++)
4192 extract_firmware_partition(input_file
, info
.payload_offset
, &info
.entries
[i
], output_directory
);
4197 static struct flash_partition_entry
*find_partition(
4198 struct flash_partition_entry
*entries
, size_t max_entries
,
4199 const char *name
, const char *error_msg
)
4201 for (size_t i
= 0; i
< max_entries
; i
++, entries
++) {
4202 if (strcmp(entries
->name
, name
) == 0)
4207 error(1, 0, "%s", error_msg
);
4213 static int firmware_info(const char *input
)
4215 struct safeloader_image_info info
= {};
4216 struct image_partition_entry part
= {};
4217 struct flash_partition_entry
*e
;
4220 input_file
= fopen(input
, "rb");
4222 safeloader_parse_image(input_file
, &info
);
4224 if (info
.type
== SAFELOADER_TYPE_VENDOR
) {
4225 char buf
[SAFELOADER_HEADER_SIZE
] = {};
4226 uint32_t vendor_size
;
4228 fseek(input_file
, SAFELOADER_PREAMBLE_SIZE
, SEEK_SET
);
4229 fread(&vendor_size
, sizeof(uint32_t), 1, input_file
);
4231 vendor_size
= ntohl(vendor_size
);
4232 fread(buf
, vendor_size
, 1, input_file
);
4234 printf("Firmware vendor string:\n");
4235 fwrite(buf
, strnlen(buf
, vendor_size
), 1, stdout
);
4239 printf("Firmware image partitions:\n");
4240 printf("%-8s %-8s %s\n", "base", "size", "name");
4242 e
= &info
.entries
[0];
4243 for (unsigned int i
= 0; i
< MAX_PARTITIONS
&& e
->name
; i
++, e
++)
4244 printf("%08x %08x %s\n", e
->base
, e
->size
, e
->name
);
4246 e
= find_partition(&info
.entries
[0], MAX_PARTITIONS
, "soft-version", NULL
);
4248 struct soft_version
*s
;
4249 unsigned int ascii_len
;
4254 safeloader_read_partition(input_file
, info
.payload_offset
+ e
->base
, e
, &part
);
4255 data_len
= ntohl(((struct meta_header
*) part
.data
)->length
);
4256 buf
= part
.data
+ sizeof(struct meta_header
);
4258 /* Check for (null-terminated) string */
4260 while (ascii_len
< data_len
&& isascii(buf
[ascii_len
]))
4263 isstr
= ascii_len
== data_len
;
4265 printf("\n[Software version]\n");
4267 fwrite(buf
, strnlen((const char *) buf
, data_len
), 1, stdout
);
4269 } else if (data_len
>= offsetof(struct soft_version
, rev
)) {
4270 s
= (struct soft_version
*) buf
;
4272 printf("Version: %d.%d.%d\n", s
->version_major
, s
->version_minor
, s
->version_patch
);
4273 printf("Date: %02x%02x-%02x-%02x\n", s
->year_hi
, s
->year_lo
, s
->month
, s
->day
);
4274 printf("Revision: %d\n", ntohl(s
->rev
));
4276 if (data_len
>= offsetof(struct soft_version
, compat_level
)) {
4277 printf("Compatibility level: %d\n", ntohl(s
->compat_level
));
4280 printf("Failed to parse data\n");
4283 free_image_partition(&part
);
4286 e
= find_partition(&info
.entries
[0], MAX_PARTITIONS
, "support-list", NULL
);
4290 safeloader_read_partition(input_file
, info
.payload_offset
+ e
->base
, e
, &part
);
4291 data_len
= ntohl(((struct meta_header
*) part
.data
)->length
);
4293 printf("\n[Support list]\n");
4294 fwrite(part
.data
+ sizeof(struct meta_header
), data_len
, 1, stdout
);
4297 free_image_partition(&part
);
4300 e
= find_partition(&info
.entries
[0], MAX_PARTITIONS
, "partition-table", NULL
);
4302 size_t flash_table_offset
= info
.payload_offset
+ e
->base
+ 4;
4303 struct flash_partition_entry parts
[MAX_PARTITIONS
] = {};
4305 if (read_partition_table(input_file
, flash_table_offset
, parts
, MAX_PARTITIONS
, PARTITION_TABLE_FLASH
))
4306 error(1, 0, "Error can not read the partition table (partition)");
4308 printf("\n[Partition table]\n");
4309 printf("%-8s %-8s %s\n", "base", "size", "name");
4312 for (unsigned int i
= 0; i
< MAX_PARTITIONS
&& e
->name
; i
++, e
++)
4313 printf("%08x %08x %s\n", e
->base
, e
->size
, e
->name
);
4321 static void write_ff(FILE *output_file
, size_t size
)
4326 memset(buf
, 0xff, sizeof(buf
));
4328 for (offset
= 0; offset
+ sizeof(buf
) < size
; offset
+= sizeof(buf
)) {
4329 if (fwrite(buf
, sizeof(buf
), 1, output_file
) != 1)
4330 error(1, errno
, "Can not write 0xff to output_file");
4333 /* write last chunk smaller than buffer */
4334 if (offset
< size
) {
4335 offset
= size
- offset
;
4336 if (fwrite(buf
, offset
, 1, output_file
) != 1)
4337 error(1, errno
, "Can not write partition to output_file");
4341 static void convert_firmware(const char *input
, const char *output
)
4343 struct flash_partition_entry flash
[MAX_PARTITIONS
] = {};
4344 struct flash_partition_entry
*fwup_partition_table
;
4345 struct flash_partition_entry
*flash_file_system
;
4346 struct flash_partition_entry
*fwup_file_system
;
4347 struct flash_partition_entry
*flash_os_image
;
4348 struct flash_partition_entry
*fwup_os_image
;
4349 struct safeloader_image_info info
= {};
4350 size_t flash_table_offset
;
4351 struct stat statbuf
;
4355 /* check input file */
4356 if (stat(input
, &statbuf
)) {
4357 error(1, errno
, "Can not read input firmware %s", input
);
4360 input_file
= fopen(input
, "rb");
4362 error(1, 0, "Can not open input firmware %s", input
);
4364 output_file
= fopen(output
, "wb");
4366 error(1, 0, "Can not open output firmware %s", output
);
4368 input_file
= fopen(input
, "rb");
4369 safeloader_parse_image(input_file
, &info
);
4371 fwup_os_image
= find_partition(info
.entries
, MAX_PARTITIONS
,
4372 "os-image", "Error can not find os-image partition (fwup)");
4373 fwup_file_system
= find_partition(info
.entries
, MAX_PARTITIONS
,
4374 "file-system", "Error can not find file-system partition (fwup)");
4375 fwup_partition_table
= find_partition(info
.entries
, MAX_PARTITIONS
,
4376 "partition-table", "Error can not find partition-table partition");
4378 /* the flash partition table has a 0x00000004 magic haeder */
4379 flash_table_offset
= info
.payload_offset
+ fwup_partition_table
->base
+ 4;
4380 if (read_partition_table(input_file
, flash_table_offset
, flash
, MAX_PARTITIONS
, PARTITION_TABLE_FLASH
) != 0)
4381 error(1, 0, "Error can not read the partition table (flash)");
4383 flash_os_image
= find_partition(flash
, MAX_PARTITIONS
,
4384 "os-image", "Error can not find os-image partition (flash)");
4385 flash_file_system
= find_partition(flash
, MAX_PARTITIONS
,
4386 "file-system", "Error can not find file-system partition (flash)");
4388 /* write os_image to 0x0 */
4389 write_partition(input_file
, info
.payload_offset
, fwup_os_image
, output_file
);
4390 write_ff(output_file
, flash_os_image
->size
- fwup_os_image
->size
);
4392 /* write file-system behind os_image */
4393 fseek(output_file
, flash_file_system
->base
- flash_os_image
->base
, SEEK_SET
);
4394 write_partition(input_file
, info
.payload_offset
, fwup_file_system
, output_file
);
4396 fclose(output_file
);
4400 int main(int argc
, char *argv
[]) {
4401 const char *info_image
= NULL
, *board
= NULL
, *kernel_image
= NULL
, *rootfs_image
= NULL
, *output
= NULL
;
4402 const char *extract_image
= NULL
, *output_directory
= NULL
, *convert_image
= NULL
;
4403 bool add_jffs2_eof
= false, sysupgrade
= false;
4405 struct device_info
*info
;
4406 set_source_date_epoch();
4411 c
= getopt(argc
, argv
, "i:B:k:r:o:V:jSh:x:d:z:");
4417 info_image
= optarg
;
4425 kernel_image
= optarg
;
4429 rootfs_image
= optarg
;
4437 sscanf(optarg
, "r%u", &rev
);
4441 add_jffs2_eof
= true;
4453 output_directory
= optarg
;
4457 extract_image
= optarg
;
4461 convert_image
= optarg
;
4471 firmware_info(info_image
);
4472 } else if (extract_image
|| output_directory
) {
4474 error(1, 0, "No factory/oem image given via -x <file>. Output directory is only valid with -x");
4475 if (!output_directory
)
4476 error(1, 0, "Can not extract an image without output directory. Use -d <dir>");
4477 extract_firmware(extract_image
, output_directory
);
4478 } else if (convert_image
) {
4480 error(1, 0, "Can not convert a factory/oem image into sysupgrade image without output file. Use -o <file>");
4481 convert_firmware(convert_image
, output
);
4484 error(1, 0, "no board has been specified");
4486 error(1, 0, "no kernel image has been specified");
4488 error(1, 0, "no rootfs image has been specified");
4490 error(1, 0, "no output filename has been specified");
4492 info
= find_board(board
);
4495 error(1, 0, "unsupported board %s", board
);
4497 build_image(output
, kernel_image
, rootfs_image
, rev
, add_jffs2_eof
, sysupgrade
, info
);