1 // SPDX-License-Identifier: GPL-2.0-only
3 * Device Tree Source for Meraki MX60/MX60W (Buckminster)
5 * Copyright (C) 2016 Chris Blake <chrisrblake93@gmail.com>
7 * Based on Cisco Meraki DTS extracted from release wired-12-217818
12 #include <dt-bindings/leds/common.h>
13 #include "apm82181.dtsi"
16 model = "Meraki MX60/MX60W Security Appliance";
17 compatible = "meraki,mx60", "meraki,buckminster", "apm,bluestone";
24 stdout-path = "/plb/opb/serial@ef600400";
46 /* Buckminster has 1GiB of NAND */
51 compatible = "fixed-partitions";
57 reg = <0x00000000 0x00100000>;
63 reg = <0x00100000 0x00100000>;
69 reg = <0x00200000 0x00040000>;
74 reg = <0x00240000 0x3fdc0000>;
99 phy0: ethernet-phy@0 {
100 compatible = "ethernet-phy-id004d.d034";
102 qca,mib-poll-interval = <500>;
104 qca,ar8327-initvals = <
107 0x0004 0x07a00000 /* PAD0_MODE */
108 0x000c 0x01000000 /* PAD6_MODE */
109 0x007c 0x0000007e /* PORT0_STATUS */
117 compatible = "gpio-leds";
120 color = <LED_COLOR_ID_GREEN>;
121 function = LED_FUNCTION_POWER;
122 gpios = <&GPIO0 18 GPIO_ACTIVE_LOW>;
126 color = <LED_COLOR_ID_AMBER>;
127 function = LED_FUNCTION_FAULT;
128 gpios = <&GPIO0 19 GPIO_ACTIVE_LOW>;
133 color = <LED_COLOR_ID_GREEN>;
134 function = LED_FUNCTION_WAN;
135 gpios = <&GPIO0 17 GPIO_ACTIVE_LOW>;
139 color = <LED_COLOR_ID_AMBER>;
140 function = LED_FUNCTION_WAN;
141 gpios = <&GPIO0 15 GPIO_ACTIVE_LOW>;
145 color = <LED_COLOR_ID_GREEN>;
146 function = LED_FUNCTION_LAN;
147 function-enumerator = <0>;
148 gpios = <&GPIO0 20 GPIO_ACTIVE_LOW>;
152 color = <LED_COLOR_ID_GREEN>;
153 function = LED_FUNCTION_LAN;
154 function-enumerator = <1>;
155 gpios = <&GPIO0 21 GPIO_ACTIVE_LOW>;
159 color = <LED_COLOR_ID_GREEN>;
160 function = LED_FUNCTION_LAN;
161 function-enumerator = <2>;
162 gpios = <&GPIO0 22 GPIO_ACTIVE_LOW>;
166 color = <LED_COLOR_ID_GREEN>;
167 function = LED_FUNCTION_LAN;
168 function-enumerator = <3>;
169 gpios = <&GPIO0 23 GPIO_ACTIVE_LOW>;
174 compatible = "gpio-keys";
177 label = "Reset button";
178 linux,code = <KEY_RESTART>;
179 gpios = <&GPIO0 16 GPIO_ACTIVE_LOW>;
180 interrupt-parent = <&UIC1>;
181 interrupts = <0x15 IRQ_TYPE_EDGE_FALLING>;
182 debounce-interval = <60>;
188 /* Leave this enabled as u-boot on the MX60 will disable it for us */
192 * relevant lspci topology:
194 * -+-[0000:40]---00.0-[41-7f]----00.0
198 reg = <0x00400000 0 0 0 0>;
199 #address-cells = <3>;
204 /* Atheros AR9380 2.4/5GHz */
205 compatible = "pci168c,0030";
206 reg = <0x00410000 0 0 0 0>;
207 interrupts = <1>; /* INTA */