1 // SPDX-License-Identifier: GPL-2.0-only
3 * Device Tree Source for Meraki MX60/MX60W (Buckminster)
5 * Copyright (C) 2016 Chris Blake <chrisrblake93@gmail.com>
7 * Based on Cisco Meraki DTS extracted from release wired-12-217818
12 #include <dt-bindings/leds/common.h>
13 #include "apm82181.dtsi"
16 model = "Meraki MX60/MX60W Security Appliance";
17 compatible = "meraki,mx60", "meraki,buckminster", "apm,bluestone";
24 stdout-path = "/plb/opb/serial@ef600400";
46 /* Buckminster has 1GiB of NAND */
53 compatible = "fixed-partitions";
59 reg = <0x00000000 0x00100000>;
65 reg = <0x00100000 0x00100000>;
71 reg = <0x00200000 0x00040000>;
76 reg = <0x00240000 0x3fdc0000>;
101 phy0: ethernet-phy@0 {
102 compatible = "ethernet-phy-id004d.d034";
104 qca,mib-poll-interval = <500>;
106 qca,ar8327-initvals = <
109 0x0004 0x07a00000 /* PAD0_MODE */
110 0x000c 0x01000000 /* PAD6_MODE */
111 0x007c 0x0000007e /* PORT0_STATUS */
119 compatible = "gpio-leds";
122 color = <LED_COLOR_ID_GREEN>;
123 function = LED_FUNCTION_POWER;
124 gpios = <&GPIO0 18 GPIO_ACTIVE_LOW>;
128 color = <LED_COLOR_ID_AMBER>;
129 function = LED_FUNCTION_FAULT;
130 gpios = <&GPIO0 19 GPIO_ACTIVE_LOW>;
135 color = <LED_COLOR_ID_GREEN>;
136 function = LED_FUNCTION_WAN;
137 gpios = <&GPIO0 17 GPIO_ACTIVE_LOW>;
141 color = <LED_COLOR_ID_AMBER>;
142 function = LED_FUNCTION_WAN;
143 gpios = <&GPIO0 15 GPIO_ACTIVE_LOW>;
147 color = <LED_COLOR_ID_GREEN>;
148 function = LED_FUNCTION_LAN;
149 function-enumerator = <0>;
150 gpios = <&GPIO0 20 GPIO_ACTIVE_LOW>;
154 color = <LED_COLOR_ID_GREEN>;
155 function = LED_FUNCTION_LAN;
156 function-enumerator = <1>;
157 gpios = <&GPIO0 21 GPIO_ACTIVE_LOW>;
161 color = <LED_COLOR_ID_GREEN>;
162 function = LED_FUNCTION_LAN;
163 function-enumerator = <2>;
164 gpios = <&GPIO0 22 GPIO_ACTIVE_LOW>;
168 color = <LED_COLOR_ID_GREEN>;
169 function = LED_FUNCTION_LAN;
170 function-enumerator = <3>;
171 gpios = <&GPIO0 23 GPIO_ACTIVE_LOW>;
176 compatible = "gpio-keys";
179 label = "Reset button";
180 linux,code = <KEY_RESTART>;
181 gpios = <&GPIO0 16 GPIO_ACTIVE_LOW>;
182 interrupt-parent = <&UIC1>;
183 interrupts = <0x15 IRQ_TYPE_EDGE_FALLING>;
184 debounce-interval = <60>;
190 /* Leave this enabled as u-boot on the MX60 will disable it for us */
194 * relevant lspci topology:
196 * -+-[0000:40]---00.0-[41-7f]----00.0
200 reg = <0x00400000 0 0 0 0>;
201 #address-cells = <3>;
206 /* Atheros AR9380 2.4/5GHz */
207 compatible = "pci168c,0030";
208 reg = <0x00410000 0 0 0 0>;
209 interrupts = <1>; /* INTA */