2 * Copyright (C) 2006, 2007 OpenWrt.org
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License as published by
6 * the Free Software Foundation; either version 2 of the License, or
7 * (at your option) any later version.
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software
16 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
19 #include <linux/autoconf.h>
20 #include <linux/init.h>
21 #include <linux/types.h>
22 #include <linux/module.h>
23 #include <linux/delay.h>
24 #include <linux/platform_device.h>
25 #include <linux/mtd/physmap.h>
26 #include <linux/serial.h>
27 #include <linux/serial_8250.h>
28 #include <linux/ioport.h>
31 #include <asm/addrspace.h>
32 #include <asm/ar7/ar7.h>
33 #include <asm/ar7/gpio.h>
34 #include <asm/ar7/prom.h>
35 #include <asm/ar7/vlynq.h>
37 struct plat_vlynq_data
{
38 struct plat_vlynq_ops ops
;
44 static int vlynq_on(struct vlynq_device
*dev
)
47 struct plat_vlynq_data
*pdata
= dev
->dev
.platform_data
;
49 if ((result
= gpio_request(pdata
->gpio_bit
, "vlynq")))
52 ar7_device_reset(pdata
->reset_bit
);
54 if ((result
= ar7_gpio_disable(pdata
->gpio_bit
)))
57 if ((result
= ar7_gpio_enable(pdata
->gpio_bit
)))
60 if ((result
= gpio_direction_output(pdata
->gpio_bit
)))
61 goto out_gpio_enabled
;
63 gpio_set_value(pdata
->gpio_bit
, 0);
66 gpio_set_value(pdata
->gpio_bit
, 1);
72 ar7_gpio_disable(pdata
->gpio_bit
);
74 ar7_device_disable(pdata
->reset_bit
);
75 gpio_free(pdata
->gpio_bit
);
80 static void vlynq_off(struct vlynq_device
*dev
)
82 struct plat_vlynq_data
*pdata
= dev
->dev
.platform_data
;
83 ar7_gpio_disable(pdata
->gpio_bit
);
84 gpio_free(pdata
->gpio_bit
);
85 ar7_device_disable(pdata
->reset_bit
);
88 static struct resource physmap_flash_resource
= {
90 .flags
= IORESOURCE_MEM
,
95 static struct resource cpmac_low_res
[] = {
98 .flags
= IORESOURCE_MEM
,
99 .start
= AR7_REGS_MAC0
,
100 .end
= AR7_REGS_MAC0
+ 0x7ff,
104 .flags
= IORESOURCE_IRQ
,
110 static struct resource cpmac_high_res
[] = {
113 .flags
= IORESOURCE_MEM
,
114 .start
= AR7_REGS_MAC1
,
115 .end
= AR7_REGS_MAC1
+ 0x7ff,
119 .flags
= IORESOURCE_IRQ
,
125 static struct resource vlynq_low_res
[] = {
128 .flags
= IORESOURCE_MEM
,
129 .start
= AR7_REGS_VLYNQ0
,
130 .end
= AR7_REGS_VLYNQ0
+ 0xff,
134 .flags
= IORESOURCE_IRQ
,
140 .flags
= IORESOURCE_MEM
,
146 .flags
= IORESOURCE_IRQ
,
152 static struct resource vlynq_high_res
[] = {
155 .flags
= IORESOURCE_MEM
,
156 .start
= AR7_REGS_VLYNQ1
,
157 .end
= AR7_REGS_VLYNQ1
+ 0xff,
161 .flags
= IORESOURCE_IRQ
,
167 .flags
= IORESOURCE_MEM
,
173 .flags
= IORESOURCE_IRQ
,
179 static struct physmap_flash_data physmap_flash_data
= {
183 static struct plat_cpmac_data cpmac_low_data
= {
186 .phy_mask
= 0x80000000,
189 static struct plat_cpmac_data cpmac_high_data
= {
192 .phy_mask
= 0x7fffffff,
195 static struct plat_vlynq_data vlynq_low_data
= {
197 .ops
.off
= vlynq_off
,
202 static struct plat_vlynq_data vlynq_high_data
= {
204 .ops
.off
= vlynq_off
,
209 static struct platform_device physmap_flash
= {
211 .name
= "physmap-flash",
212 .dev
.platform_data
= &physmap_flash_data
,
213 .resource
= &physmap_flash_resource
,
217 static struct platform_device cpmac_low
= {
220 .dev
.platform_data
= &cpmac_low_data
,
221 .resource
= cpmac_low_res
,
222 .num_resources
= ARRAY_SIZE(cpmac_low_res
),
225 static struct platform_device cpmac_high
= {
228 .dev
.platform_data
= &cpmac_high_data
,
229 .resource
= cpmac_high_res
,
230 .num_resources
= ARRAY_SIZE(cpmac_high_res
),
233 static struct platform_device vlynq_low
= {
236 .dev
.platform_data
= &vlynq_low_data
,
237 .resource
= vlynq_low_res
,
238 .num_resources
= ARRAY_SIZE(vlynq_low_res
),
241 static struct platform_device vlynq_high
= {
244 .dev
.platform_data
= &vlynq_high_data
,
245 .resource
= vlynq_high_res
,
246 .num_resources
= ARRAY_SIZE(vlynq_high_res
),
250 /* This is proper way to define uart ports, but they are then detected
251 * as xscale and, obviously, don't work...
253 #if !defined(CONFIG_SERIAL_8250)
255 static struct plat_serial8250_port uart0_data
= {
256 .mapbase
= AR7_REGS_UART0
,
257 .irq
= AR7_IRQ_UART0
,
260 .flags
= UPF_BOOT_AUTOCONF
| UPF_IOREMAP
,
263 static struct plat_serial8250_port uart1_data
= {
264 .mapbase
= UR8_REGS_UART1
,
265 .irq
= AR7_IRQ_UART1
,
268 .flags
= UPF_BOOT_AUTOCONF
| UPF_IOREMAP
,
271 static struct plat_serial8250_port uart_data
[] = {
277 static struct plat_serial8250_port uart_data_single
[] = {
282 static struct platform_device uart
= {
284 .name
= "serial8250",
285 .dev
.platform_data
= uart_data_single
289 static inline unsigned char char2hex(char h
)
292 case '0': case '1': case '2': case '3': case '4':
293 case '5': case '6': case '7': case '8': case '9':
295 case 'A': case 'B': case 'C': case 'D': case 'E': case 'F':
297 case 'a': case 'b': case 'c': case 'd': case 'e': case 'f':
304 static void cpmac_get_mac(int instance
, unsigned char *dev_addr
)
307 char name
[5], default_mac
[] = "00:00:00:12:34:56", *mac
;
310 sprintf(name
, "mac%c", 'a' + instance
);
311 mac
= prom_getenv(name
);
313 sprintf(name
, "mac%c", 'a');
314 mac
= prom_getenv(name
);
318 for (i
= 0; i
< 6; i
++)
319 dev_addr
[i
] = (char2hex(mac
[i
* 3]) << 4) +
320 char2hex(mac
[i
* 3 + 1]);
323 static int __init
ar7_register_devices(void)
327 #ifdef CONFIG_SERIAL_8250
329 static struct uart_port uart_port
[2];
331 memset(uart_port
, 0, sizeof(struct uart_port
) * 2);
333 uart_port
[0].type
= PORT_AR7
;
334 uart_port
[0].line
= 0;
335 uart_port
[0].irq
= AR7_IRQ_UART0
;
336 uart_port
[0].uartclk
= ar7_bus_freq() / 2;
337 uart_port
[0].iotype
= UPIO_MEM
;
338 uart_port
[0].mapbase
= AR7_REGS_UART0
;
339 uart_port
[0].membase
= ioremap(uart_port
[0].mapbase
, 256);
340 uart_port
[0].regshift
= 2;
341 res
= early_serial_setup(&uart_port
[0]);
346 /* Only TNETD73xx have a second serial port */
347 if (ar7_has_second_uart()) {
348 uart_port
[1].type
= PORT_AR7
;
349 uart_port
[1].line
= 1;
350 uart_port
[1].irq
= AR7_IRQ_UART1
;
351 uart_port
[1].uartclk
= ar7_bus_freq() / 2;
352 uart_port
[1].iotype
= UPIO_MEM
;
353 uart_port
[1].mapbase
= UR8_REGS_UART1
;
354 uart_port
[1].membase
= ioremap(uart_port
[1].mapbase
, 256);
355 uart_port
[1].regshift
= 2;
356 res
= early_serial_setup(&uart_port
[1]);
361 #else /* !CONFIG_SERIAL_8250 */
363 uart_data
[0].uartclk
= ar7_bus_freq() / 2;
364 uart_data
[1].uartclk
= uart_data
[0].uartclk
;
366 /* Only TNETD73xx have a second serial port */
367 if (ar7_has_second_uart())
368 uart
.dev
.platform_data
= uart_data
;
370 res
= platform_device_register(&uart
);
374 #endif /* CONFIG_SERIAL_8250 */
376 res
= platform_device_register(&physmap_flash
);
380 res
= platform_device_register(&vlynq_low
);
384 ar7_device_disable(vlynq_low_data
.reset_bit
);
385 if (ar7_has_high_vlynq()) {
386 ar7_device_disable(vlynq_high_data
.reset_bit
);
387 res
= platform_device_register(&vlynq_high
);
392 if (ar7_has_high_cpmac()) {
393 cpmac_get_mac(1, cpmac_high_data
.dev_addr
);
394 res
= platform_device_register(&cpmac_high
);
398 cpmac_low_data
.phy_mask
= 0xffffffff;
401 cpmac_get_mac(0, cpmac_low_data
.dev_addr
);
402 res
= platform_device_register(&cpmac_low
);
408 arch_initcall(ar7_register_devices
);