2 * jjPlus JWAP003 board support
6 #include <asm/mach-ar71xx/ar71xx.h>
8 #include <linux/i2c-gpio.h>
9 #include <linux/platform_device.h>
13 #include "dev-m25p80.h"
14 #include "dev-gpio-buttons.h"
15 #include "dev-pb42-pci.h"
18 #define JWAP003_BUTTONS_POLL_INTERVAL 20
19 #define JWAP003_GPIO_WPS 11
20 #define JWAP003_GPIO_I2C_SCL 0
21 #define JWAP003_GPIO_I2C_SDA 1
23 static struct gpio_button jwap003_gpio_buttons
[] __initdata
= {
27 .code
= KEY_WPS_BUTTON
,
29 .gpio
= JWAP003_GPIO_WPS
,
34 static struct i2c_gpio_platform_data jwap003_i2c_gpio_data
= {
35 .sda_pin
= JWAP003_GPIO_I2C_SDA
,
36 .scl_pin
= JWAP003_GPIO_I2C_SCL
,
39 static struct platform_device jwap003_i2c_gpio_device
= {
43 .platform_data
= &jwap003_i2c_gpio_data
,
47 #define JWAP003_WAN_PHYMASK BIT(0)
48 #define JWAP003_LAN_PHYMASK BIT(4)
50 static void __init
jwap003_init(void)
52 ar71xx_add_device_m25p80(NULL
);
54 ar71xx_add_device_mdio(0x0);
56 ar71xx_eth0_data
.phy_if_mode
= PHY_INTERFACE_MODE_RMII
;
57 ar71xx_eth0_data
.phy_mask
= JWAP003_WAN_PHYMASK
;
58 ar71xx_eth0_data
.speed
= SPEED_100
;
59 ar71xx_eth0_data
.duplex
= DUPLEX_FULL
;
60 ar71xx_eth0_data
.has_ar8216
= 1;
62 ar71xx_eth1_data
.phy_if_mode
= PHY_INTERFACE_MODE_RMII
;
63 ar71xx_eth1_data
.phy_mask
= JWAP003_LAN_PHYMASK
;
64 ar71xx_eth1_data
.speed
= SPEED_100
;
65 ar71xx_eth1_data
.duplex
= DUPLEX_FULL
;
67 ar71xx_add_device_eth(0);
68 ar71xx_add_device_eth(1);
70 platform_device_register(&jwap003_i2c_gpio_device
);
72 ar71xx_add_device_usb();
74 ar71xx_add_device_gpio_buttons(-1, JWAP003_BUTTONS_POLL_INTERVAL
,
75 ARRAY_SIZE(jwap003_gpio_buttons
),
76 jwap003_gpio_buttons
);
81 MIPS_MACHINE(AR71XX_MACH_JWAP003
, "JWAP003", "jjPlus JWAP003", jwap003_init
);