2 * Planex MZK-W300NH board support
4 * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
5 * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License version 2 as published
9 * by the Free Software Foundation.
12 #include <linux/mtd/mtd.h>
13 #include <linux/mtd/partitions.h>
15 #include <asm/mach-ar71xx/ar71xx.h>
19 #include "dev-m25p80.h"
20 #include "dev-ar9xxx-wmac.h"
21 #include "dev-gpio-buttons.h"
22 #include "dev-leds-gpio.h"
24 #define MZK_W300NH_GPIO_LED_STATUS 1
25 #define MZK_W300NH_GPIO_LED_WPS 3
26 #define MZK_W300NH_GPIO_LED_WLAN 6
27 #define MZK_W300NH_GPIO_LED_AP 15
28 #define MZK_W300NH_GPIO_LED_ROUTER 16
30 #define MZK_W300NH_GPIO_BTN_APROUTER 5
31 #define MZK_W300NH_GPIO_BTN_WPS 12
32 #define MZK_W300NH_GPIO_BTN_RESET 21
34 #define MZK_W04NU_BUTTONS_POLL_INTERVAL 20
36 #ifdef CONFIG_MTD_PARTITIONS
37 static struct mtd_partition mzk_w300nh_partitions
[] = {
42 .mask_flags
= MTD_WRITEABLE
,
59 .mask_flags
= MTD_WRITEABLE
,
66 #endif /* CONFIG_MTD_PARTITIONS */
68 static struct flash_platform_data mzk_w300nh_flash_data
= {
69 #ifdef CONFIG_MTD_PARTITIONS
70 .parts
= mzk_w300nh_partitions
,
71 .nr_parts
= ARRAY_SIZE(mzk_w300nh_partitions
),
75 static struct gpio_led mzk_w300nh_leds_gpio
[] __initdata
= {
77 .name
= "mzk-w300nh:green:status",
78 .gpio
= MZK_W300NH_GPIO_LED_STATUS
,
81 .name
= "mzk-w300nh:blue:wps",
82 .gpio
= MZK_W300NH_GPIO_LED_WPS
,
85 .name
= "mzk-w300nh:green:wlan",
86 .gpio
= MZK_W300NH_GPIO_LED_WLAN
,
89 .name
= "mzk-w300nh:green:ap",
90 .gpio
= MZK_W300NH_GPIO_LED_AP
,
93 .name
= "mzk-w300nh:green:router",
94 .gpio
= MZK_W300NH_GPIO_LED_ROUTER
,
99 static struct gpio_button mzk_w300nh_gpio_buttons
[] __initdata
= {
105 .gpio
= MZK_W300NH_GPIO_BTN_RESET
,
110 .code
= KEY_WPS_BUTTON
,
112 .gpio
= MZK_W300NH_GPIO_BTN_WPS
,
119 .gpio
= MZK_W300NH_GPIO_BTN_APROUTER
,
124 #define MZK_W300NH_WAN_PHYMASK BIT(4)
125 #define MZK_W300NH_MDIO_MASK (~MZK_W300NH_WAN_PHYMASK)
127 static void __init
mzk_w300nh_setup(void)
129 u8
*eeprom
= (u8
*) KSEG1ADDR(0x1fff1000);
131 ar71xx_add_device_mdio(MZK_W300NH_MDIO_MASK
);
133 ar71xx_init_mac(ar71xx_eth0_data
.mac_addr
, eeprom
, 0);
134 ar71xx_eth0_data
.phy_if_mode
= PHY_INTERFACE_MODE_RMII
;
135 ar71xx_eth0_data
.speed
= SPEED_100
;
136 ar71xx_eth0_data
.duplex
= DUPLEX_FULL
;
137 ar71xx_eth0_data
.has_ar8216
= 1;
139 ar71xx_init_mac(ar71xx_eth1_data
.mac_addr
, eeprom
, 1);
140 ar71xx_eth1_data
.phy_if_mode
= PHY_INTERFACE_MODE_RMII
;
141 ar71xx_eth1_data
.phy_mask
= MZK_W300NH_WAN_PHYMASK
;
143 ar71xx_add_device_eth(0);
144 ar71xx_add_device_eth(1);
146 ar71xx_add_device_m25p80(&mzk_w300nh_flash_data
);
148 ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(mzk_w300nh_leds_gpio
),
149 mzk_w300nh_leds_gpio
);
151 ar71xx_add_device_gpio_buttons(-1, MZK_W04NU_BUTTONS_POLL_INTERVAL
,
152 ARRAY_SIZE(mzk_w300nh_gpio_buttons
),
153 mzk_w300nh_gpio_buttons
);
154 ar9xxx_add_device_wmac(eeprom
, NULL
);
157 MIPS_MACHINE(AR71XX_MACH_MZK_W300NH
, "MZK-W300NH", "Planex MZK-W300NH",