2 * MikroTik SPI-NOR RouterBOARDs support
4 * - MikroTik RouterBOARD mAP L-2nD
5 * - MikroTik RouterBOARD 941L-2nD
6 * - MikroTik RouterBOARD 951Ui-2nD
7 * - MikroTik RouterBOARD 750UP r2
8 * - MikroTik RouterBOARD 750 r2
9 * - MikroTik RouterBOARD LHG 5nD
11 * Preliminary support for the following hardware
12 * - MikroTik RouterBOARD wAP2nD
13 * - MikroTik RouterBOARD cAP2nD
14 * - MikroTik RouterBOARD mAP2nD
15 * Furthermore, the cAP lite (cAPL2nD) appears to feature the exact same
16 * hardware as the mAP L-2nD. It is unknown if they share the same board
19 * Copyright (C) 2017 Thibaut VARENE <varenet@parisc-linux.org>
21 * This program is free software; you can redistribute it and/or modify it
22 * under the terms of the GNU General Public License version 2 as published
23 * by the Free Software Foundation.
26 #include <linux/platform_device.h>
27 #include <linux/phy.h>
28 #include <linux/routerboot.h>
29 #include <linux/gpio.h>
31 #include <linux/spi/spi.h>
32 #include <linux/spi/74x164.h>
34 #include <linux/mtd/mtd.h>
35 #include <linux/mtd/partitions.h>
38 #include <asm/mach-ath79/ar71xx_regs.h>
39 #include <asm/mach-ath79/ath79.h>
44 #include "dev-gpio-buttons.h"
45 #include "dev-leds-gpio.h"
46 #include "dev-m25p80.h"
49 #include "machtypes.h"
50 #include "routerboot.h"
52 #define RBSPI_KEYS_POLL_INTERVAL 20 /* msecs */
53 #define RBSPI_KEYS_DEBOUNCE_INTERVAL (3 * RBSPI_KEYS_POLL_INTERVAL)
55 #define RBSPI_HAS_USB BIT(0)
56 #define RBSPI_HAS_WLAN0 BIT(1)
57 #define RBSPI_HAS_WLAN1 BIT(2)
58 #define RBSPI_HAS_WAN4 BIT(3) /* has WAN port on PHY4 */
59 #define RBSPI_HAS_SSR BIT(4) /* has an SSR on SPI bus 0 */
60 #define RBSPI_HAS_POE BIT(5)
61 #define RBSPI_HAS_MDIO1 BIT(6)
63 #define RB_ROUTERBOOT_OFFSET 0x0000
64 #define RB_BIOS_SIZE 0x1000
65 #define RB_SOFT_CFG_SIZE 0x1000
67 /* Flash partitions indexes */
78 static struct mtd_partition rbspi_spi_partitions
[RBSPI_PARTS
];
81 * Setup the SPI flash partition table based on initial parsing.
82 * The kernel can be at any aligned position and have any size.
84 static void __init
rbspi_init_partitions(const struct rb_info
*info
)
86 struct mtd_partition
*parts
= rbspi_spi_partitions
;
87 memset(parts
, 0x0, sizeof(*parts
));
89 parts
[RBSPI_PART_RBOOT
].name
= "routerboot";
90 parts
[RBSPI_PART_RBOOT
].offset
= RB_ROUTERBOOT_OFFSET
;
91 parts
[RBSPI_PART_RBOOT
].size
= info
->hard_cfg_offs
;
92 parts
[RBSPI_PART_RBOOT
].mask_flags
= MTD_WRITEABLE
;
94 parts
[RBSPI_PART_HCONF
].name
= "hard_config";
95 parts
[RBSPI_PART_HCONF
].offset
= info
->hard_cfg_offs
;
96 parts
[RBSPI_PART_HCONF
].size
= info
->hard_cfg_size
;
97 parts
[RBSPI_PART_HCONF
].mask_flags
= MTD_WRITEABLE
;
99 parts
[RBSPI_PART_BIOS
].name
= "bios";
100 parts
[RBSPI_PART_BIOS
].offset
= info
->hard_cfg_offs
101 + info
->hard_cfg_size
;
102 parts
[RBSPI_PART_BIOS
].size
= RB_BIOS_SIZE
;
103 parts
[RBSPI_PART_BIOS
].mask_flags
= MTD_WRITEABLE
;
105 parts
[RBSPI_PART_RBOOT2
].name
= "routerboot2";
106 parts
[RBSPI_PART_RBOOT2
].offset
= parts
[RBSPI_PART_BIOS
].offset
108 parts
[RBSPI_PART_RBOOT2
].size
= info
->soft_cfg_offs
109 - parts
[RBSPI_PART_RBOOT2
].offset
;
110 parts
[RBSPI_PART_RBOOT2
].mask_flags
= MTD_WRITEABLE
;
112 parts
[RBSPI_PART_SCONF
].name
= "soft_config";
113 parts
[RBSPI_PART_SCONF
].offset
= info
->soft_cfg_offs
;
114 parts
[RBSPI_PART_SCONF
].size
= RB_SOFT_CFG_SIZE
;
116 parts
[RBSPI_PART_FIRMW
].name
= "firmware";
117 parts
[RBSPI_PART_FIRMW
].offset
= parts
[RBSPI_PART_SCONF
].offset
118 + parts
[RBSPI_PART_SCONF
].size
;
119 parts
[RBSPI_PART_FIRMW
].size
= MTDPART_SIZ_FULL
;
122 static struct flash_platform_data rbspi_spi_flash_data
= {
123 .parts
= rbspi_spi_partitions
,
124 .nr_parts
= ARRAY_SIZE(rbspi_spi_partitions
),
127 /* Several boards only have a single reset button wired to GPIO 16 */
128 #define RBSPI_GPIO_BTN_RESET16 16
130 static struct gpio_keys_button rbspi_gpio_keys_reset16
[] __initdata
= {
132 .desc
= "Reset button",
135 .debounce_interval
= RBSPI_KEYS_DEBOUNCE_INTERVAL
,
136 .gpio
= RBSPI_GPIO_BTN_RESET16
,
141 /* RB mAP L-2nD gpios */
142 #define RBMAPL_GPIO_LED_POWER 17
143 #define RBMAPL_GPIO_LED_USER 14
144 #define RBMAPL_GPIO_LED_ETH 4
145 #define RBMAPL_GPIO_LED_WLAN 11
147 static struct gpio_led rbmapl_leds
[] __initdata
= {
149 .name
= "rb:green:power",
150 .gpio
= RBMAPL_GPIO_LED_POWER
,
152 .default_state
= LEDS_GPIO_DEFSTATE_ON
,
154 .name
= "rb:green:user",
155 .gpio
= RBMAPL_GPIO_LED_USER
,
158 .name
= "rb:green:eth",
159 .gpio
= RBMAPL_GPIO_LED_ETH
,
162 .name
= "rb:green:wlan",
163 .gpio
= RBMAPL_GPIO_LED_WLAN
,
168 /* RB 941L-2nD gpios */
169 #define RBHAPL_GPIO_LED_USER 14
170 static struct gpio_led rbhapl_leds
[] __initdata
= {
172 .name
= "rb:green:user",
173 .gpio
= RBHAPL_GPIO_LED_USER
,
179 #define RBSPI_SSR_GPIO_BASE 40
180 #define RBSPI_SSR_GPIO(bit) (RBSPI_SSR_GPIO_BASE + (bit))
182 /* RB 951Ui-2nD gpios */
183 #define RB952_SSR_BIT_LED_LAN1 0
184 #define RB952_SSR_BIT_LED_LAN2 1
185 #define RB952_SSR_BIT_LED_LAN3 2
186 #define RB952_SSR_BIT_LED_LAN4 3
187 #define RB952_SSR_BIT_LED_LAN5 4
188 #define RB952_SSR_BIT_USB_POWER 5
189 #define RB952_SSR_BIT_LED_WLAN 6
190 #define RB952_GPIO_SSR_CS 11
191 #define RB952_GPIO_LED_USER 4
192 #define RB952_GPIO_POE_POWER 14
193 #define RB952_GPIO_POE_STATUS 12
194 #define RB952_GPIO_USB_POWER RBSPI_SSR_GPIO(RB952_SSR_BIT_USB_POWER)
195 #define RB952_GPIO_LED_LAN1 RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_LAN1)
196 #define RB952_GPIO_LED_LAN2 RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_LAN2)
197 #define RB952_GPIO_LED_LAN3 RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_LAN3)
198 #define RB952_GPIO_LED_LAN4 RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_LAN4)
199 #define RB952_GPIO_LED_LAN5 RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_LAN5)
200 #define RB952_GPIO_LED_WLAN RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_WLAN)
202 static struct gpio_led rb952_leds
[] __initdata
= {
204 .name
= "rb:green:user",
205 .gpio
= RB952_GPIO_LED_USER
,
208 .name
= "rb:blue:wlan",
209 .gpio
= RB952_GPIO_LED_WLAN
,
212 .name
= "rb:green:port1",
213 .gpio
= RB952_GPIO_LED_LAN1
,
216 .name
= "rb:green:port2",
217 .gpio
= RB952_GPIO_LED_LAN2
,
220 .name
= "rb:green:port3",
221 .gpio
= RB952_GPIO_LED_LAN3
,
224 .name
= "rb:green:port4",
225 .gpio
= RB952_GPIO_LED_LAN4
,
228 .name
= "rb:green:port5",
229 .gpio
= RB952_GPIO_LED_LAN5
,
234 /* RB wAP-2nD gpios */
235 #define RBWAP_GPIO_LED_USER 14
236 #define RBWAP_GPIO_LED_WLAN 11
238 static struct gpio_led rbwap_leds
[] __initdata
= {
240 .name
= "rb:green:user",
241 .gpio
= RBWAP_GPIO_LED_USER
,
244 .name
= "rb:green:wlan",
245 .gpio
= RBWAP_GPIO_LED_WLAN
,
250 /* RB cAP-2nD gpios */
251 #define RBCAP_GPIO_LED_1 14
252 #define RBCAP_GPIO_LED_2 12
253 #define RBCAP_GPIO_LED_3 11
254 #define RBCAP_GPIO_LED_4 4
255 #define RBCAP_GPIO_LED_ALL 13
257 static struct gpio_led rbcap_leds
[] __initdata
= {
259 .name
= "rb:green:rssi1",
260 .gpio
= RBCAP_GPIO_LED_1
,
263 .name
= "rb:green:rssi2",
264 .gpio
= RBCAP_GPIO_LED_2
,
267 .name
= "rb:green:rssi3",
268 .gpio
= RBCAP_GPIO_LED_3
,
271 .name
= "rb:green:rssi4",
272 .gpio
= RBCAP_GPIO_LED_4
,
277 /* RB mAP-2nD gpios */
278 #define RBMAP_SSR_BIT_LED_LAN1 0
279 #define RBMAP_SSR_BIT_LED_LAN2 1
280 #define RBMAP_SSR_BIT_LED_POEO 2
281 #define RBMAP_SSR_BIT_LED_USER 3
282 #define RBMAP_SSR_BIT_LED_WLAN 4
283 #define RBMAP_SSR_BIT_USB_POWER 5
284 #define RBMAP_SSR_BIT_LED_APCAP 6
285 #define RBMAP_GPIO_SSR_CS 11
286 #define RBMAP_GPIO_LED_POWER 4
287 #define RBMAP_GPIO_POE_POWER 14
288 #define RBMAP_GPIO_POE_STATUS 12
289 #define RBMAP_GPIO_USB_POWER RBSPI_SSR_GPIO(RBMAP_SSR_BIT_USB_POWER)
290 #define RBMAP_GPIO_LED_LAN1 RBSPI_SSR_GPIO(RBMAP_SSR_BIT_LED_LAN1)
291 #define RBMAP_GPIO_LED_LAN2 RBSPI_SSR_GPIO(RBMAP_SSR_BIT_LED_LAN2)
292 #define RBMAP_GPIO_LED_POEO RBSPI_SSR_GPIO(RBMAP_SSR_BIT_LED_POEO)
293 #define RBMAP_GPIO_LED_USER RBSPI_SSR_GPIO(RBMAP_SSR_BIT_LED_USER)
294 #define RBMAP_GPIO_LED_WLAN RBSPI_SSR_GPIO(RBMAP_SSR_BIT_LED_WLAN)
295 #define RBMAP_GPIO_LED_APCAP RBSPI_SSR_GPIO(RBMAP_SSR_BIT_LED_APCAP)
297 static struct gpio_led rbmap_leds
[] __initdata
= {
299 .name
= "rb:green:power",
300 .gpio
= RBMAP_GPIO_LED_POWER
,
302 .default_state
= LEDS_GPIO_DEFSTATE_ON
,
304 .name
= "rb:green:eth1",
305 .gpio
= RBMAP_GPIO_LED_LAN1
,
308 .name
= "rb:green:eth2",
309 .gpio
= RBMAP_GPIO_LED_WLAN
,
312 .name
= "rb:red:poe_out",
313 .gpio
= RBMAP_GPIO_LED_POEO
,
316 .name
= "rb:green:user",
317 .gpio
= RBMAP_GPIO_LED_USER
,
320 .name
= "rb:green:wlan",
321 .gpio
= RBMAP_GPIO_LED_WLAN
,
324 .name
= "rb:green:ap_cap",
325 .gpio
= RBMAP_GPIO_LED_APCAP
,
330 /* RB LHG 5nD gpios */
331 #define RBLHG_GPIO_LED_0 13
332 #define RBLHG_GPIO_LED_1 12
333 #define RBLHG_GPIO_LED_2 4
334 #define RBLHG_GPIO_LED_3 21
335 #define RBLHG_GPIO_LED_4 18
336 #define RBLHG_GPIO_LED_ETH 14
337 #define RBLHG_GPIO_LED_POWER 11
338 #define RBLHG_GPIO_LED_USER 20
339 #define RBLHG_GPIO_BTN_RESET 15
341 static struct gpio_led rblhg_leds
[] __initdata
= {
343 .name
= "rb:green:rssi0",
344 .gpio
= RBLHG_GPIO_LED_0
,
347 .name
= "rb:green:rssi1",
348 .gpio
= RBLHG_GPIO_LED_1
,
351 .name
= "rb:green:rssi2",
352 .gpio
= RBLHG_GPIO_LED_2
,
355 .name
= "rb:green:rssi3",
356 .gpio
= RBLHG_GPIO_LED_3
,
359 .name
= "rb:green:rssi4",
360 .gpio
= RBLHG_GPIO_LED_4
,
363 .name
= "rb:green:eth",
364 .gpio
= RBLHG_GPIO_LED_ETH
,
367 .name
= "rb:green:user",
368 .gpio
= RBLHG_GPIO_LED_USER
,
371 .name
= "rb:blue:power",
372 .gpio
= RBLHG_GPIO_LED_POWER
,
374 .default_state
= LEDS_GPIO_DEFSTATE_ON
,
378 static struct gpio_keys_button rblhg_gpio_keys
[] __initdata
= {
380 .desc
= "Reset button",
383 .debounce_interval
= RBSPI_KEYS_DEBOUNCE_INTERVAL
,
384 .gpio
= RBLHG_GPIO_BTN_RESET
,
390 static struct gen_74x164_chip_platform_data rbspi_ssr_data
= {
391 .base
= RBSPI_SSR_GPIO_BASE
,
394 /* the spi-ath79 driver can only natively handle CS0. Other CS are bit-banged */
395 static int rbspi_spi_cs_gpios
[] = {
396 -ENOENT
, /* CS0 is always -ENOENT: natively handled */
397 -ENOENT
, /* CS1 can be updated by the code as necessary */
400 static struct ath79_spi_platform_data rbspi_ath79_spi_data
= {
402 .cs_gpios
= rbspi_spi_cs_gpios
,
406 * Global spi_board_info: devices that don't have an SSR only have the SPI NOR
407 * flash on bus0 CS0, while devices that have an SSR add it on the same bus CS1
409 static struct spi_board_info rbspi_spi_info
[] = {
413 .max_speed_hz
= 25000000,
414 .modalias
= "m25p80",
415 .platform_data
= &rbspi_spi_flash_data
,
419 .max_speed_hz
= 25000000,
420 .modalias
= "74x164",
421 .platform_data
= &rbspi_ssr_data
,
425 void __init
rbspi_wlan_init(u16 id
, int wmac_offset
)
428 u8 wlan_mac
[ETH_ALEN
];
430 art_buf
= rb_get_ext_wlan_data(id
);
434 ath79_init_mac(wlan_mac
, ath79_mac_base
, wmac_offset
);
435 ath79_register_wmac(art_buf
+ 0x1000, wlan_mac
);
441 * Common platform init routine for all SPI NOR devices.
443 static int __init
rbspi_platform_setup(void)
445 const struct rb_info
*info
;
448 info
= rb_init_info((void *)(KSEG1ADDR(AR71XX_SPI_BASE
)), 0x20000);
452 scnprintf(buf
, sizeof(buf
), "MikroTik %s",
453 (info
->board_name
) ? info
->board_name
: "");
454 mips_set_machine_name(buf
);
456 /* fix partitions based on flash parsing */
457 rbspi_init_partitions(info
);
463 * Common peripherals init routine for all SPI NOR devices.
466 static void __init
rbspi_peripherals_setup(u32 flags
)
470 if (flags
& RBSPI_HAS_SSR
)
471 spi_n
= ARRAY_SIZE(rbspi_spi_info
);
473 spi_n
= 1; /* only one device on bus0 */
475 rbspi_ath79_spi_data
.num_chipselect
= spi_n
;
476 rbspi_ath79_spi_data
.cs_gpios
= rbspi_spi_cs_gpios
;
477 ath79_register_spi(&rbspi_ath79_spi_data
, rbspi_spi_info
, spi_n
);
479 if (flags
& RBSPI_HAS_USB
)
480 ath79_register_usb();
484 * Common network init routine for all SPI NOR devices.
487 static void __init
rbspi_network_setup(u32 flags
, int gmac1_offset
,
488 int wmac0_offset
, int wmac1_offset
)
490 /* for QCA953x that will init mdio1_device/data */
491 ath79_register_mdio(0, 0x0);
492 if (flags
& RBSPI_HAS_MDIO1
)
493 ath79_register_mdio(1, 0x0);
495 if (flags
& RBSPI_HAS_WAN4
) {
496 ath79_setup_ar934x_eth_cfg(0);
498 /* set switch to oper mode 1, PHY4 connected to CPU */
499 ath79_switch_data
.phy4_mii_en
= 1;
500 ath79_switch_data
.phy_poll_mask
|= BIT(4);
502 /* init GMAC0 connected to PHY4 at 100M */
503 ath79_eth0_data
.phy_if_mode
= PHY_INTERFACE_MODE_MII
;
504 ath79_eth0_data
.phy_mask
= BIT(4);
505 ath79_init_mac(ath79_eth0_data
.mac_addr
, ath79_mac_base
, 0);
506 ath79_register_eth(0);
508 /* set the SoC to SW_ONLY_MODE, which connects all PHYs
509 * to the internal switch.
510 * We hijack ath79_setup_ar934x_eth_cfg() to set the switch in
511 * the QCA953x, this works because this configuration bit is
512 * the same as the AR934x. There's no equivalent function for
513 * QCA953x for now. */
514 ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE
);
518 ath79_init_mac(ath79_eth1_data
.mac_addr
, ath79_mac_base
, gmac1_offset
);
519 ath79_eth1_data
.phy_if_mode
= PHY_INTERFACE_MODE_GMII
;
520 ath79_register_eth(1);
522 if (flags
& RBSPI_HAS_WLAN0
)
523 rbspi_wlan_init(0, wmac0_offset
);
525 if (flags
& RBSPI_HAS_WLAN1
)
526 rbspi_wlan_init(1, wmac1_offset
);
530 * Init the mAP lite hardware (QCA953x).
531 * The mAP L-2nD (mAP lite) has a single ethernet port, connected to PHY0.
532 * Trying to use GMAC0 in direct mode was unsucessful, so we're
533 * using SW_ONLY_MODE, which connects PHY0 to MAC1 on the internal
534 * switch, which is connected to GMAC1 on the SoC. GMAC0 is unused.
536 static void __init
rbmapl_setup(void)
538 u32 flags
= RBSPI_HAS_WLAN0
;
540 if (rbspi_platform_setup())
543 rbspi_peripherals_setup(flags
);
545 /* GMAC1 is HW MAC, WLAN0 MAC is HW MAC + 1 */
546 rbspi_network_setup(flags
, 0, 1, 0);
548 ath79_register_leds_gpio(-1, ARRAY_SIZE(rbmapl_leds
), rbmapl_leds
);
550 /* mAP lite has a single reset button as gpio 16 */
551 ath79_register_gpio_keys_polled(-1, RBSPI_KEYS_POLL_INTERVAL
,
552 ARRAY_SIZE(rbspi_gpio_keys_reset16
),
553 rbspi_gpio_keys_reset16
);
555 /* clear internal multiplexing */
556 ath79_gpio_output_select(RBMAPL_GPIO_LED_ETH
, AR934X_GPIO_OUT_GPIO
);
557 ath79_gpio_output_select(RBMAPL_GPIO_LED_POWER
, AR934X_GPIO_OUT_GPIO
);
561 * Init the hAP lite hardware (QCA953x).
562 * The 941-2nD (hAP lite) has 4 ethernet ports, with port 2-4
563 * being assigned to LAN on the casing, and port 1 being assigned
564 * to "internet" (WAN) on the casing. Port 1 is connected to PHY3.
565 * Since WAN is neither PHY0 nor PHY4, we cannot use GMAC0 with this device.
567 static void __init
rbhapl_setup(void)
569 u32 flags
= RBSPI_HAS_WLAN0
;
571 if (rbspi_platform_setup())
574 rbspi_peripherals_setup(flags
);
576 /* GMAC1 is HW MAC, WLAN0 MAC is HW MAC + 4 */
577 rbspi_network_setup(flags
, 0, 4, 0);
579 ath79_register_leds_gpio(-1, ARRAY_SIZE(rbhapl_leds
), rbhapl_leds
);
581 /* hAP lite has a single reset button as gpio 16 */
582 ath79_register_gpio_keys_polled(-1, RBSPI_KEYS_POLL_INTERVAL
,
583 ARRAY_SIZE(rbspi_gpio_keys_reset16
),
584 rbspi_gpio_keys_reset16
);
588 * The hAP, hEX lite and hEX PoE lite share the same platform
590 static void __init
rbspi_952_750r2_setup(u32 flags
)
592 if (flags
& RBSPI_HAS_SSR
)
593 rbspi_spi_cs_gpios
[1] = RB952_GPIO_SSR_CS
;
595 rbspi_peripherals_setup(flags
);
597 /* GMAC1 is HW MAC + 1, WLAN0 MAC IS HW MAC + 5 */
598 rbspi_network_setup(flags
, 1, 5, 0);
600 if (flags
& RBSPI_HAS_USB
)
601 gpio_request_one(RB952_GPIO_USB_POWER
,
602 GPIOF_OUT_INIT_HIGH
| GPIOF_EXPORT_DIR_FIXED
,
605 if (flags
& RBSPI_HAS_POE
)
606 gpio_request_one(RB952_GPIO_POE_POWER
,
607 GPIOF_OUT_INIT_HIGH
| GPIOF_EXPORT_DIR_FIXED
,
610 ath79_register_leds_gpio(-1, ARRAY_SIZE(rb952_leds
), rb952_leds
);
612 /* These devices have a single reset button as gpio 16 */
613 ath79_register_gpio_keys_polled(-1, RBSPI_KEYS_POLL_INTERVAL
,
614 ARRAY_SIZE(rbspi_gpio_keys_reset16
),
615 rbspi_gpio_keys_reset16
);
619 * Init the hAP hardware (QCA953x).
620 * The 951Ui-2nD (hAP) has 5 ethernet ports, with ports 2-5 being assigned
621 * to LAN on the casing, and port 1 being assigned to "internet" (WAN).
622 * Port 1 is connected to PHY4 (the ports are labelled in reverse physical
623 * number), so the SoC can be set to connect GMAC0 to PHY4 and GMAC1 to the
624 * internal switch for the LAN ports.
625 * The device also has USB, PoE output and an SSR used for LED multiplexing.
627 static void __init
rb952_setup(void)
629 u32 flags
= RBSPI_HAS_WLAN0
| RBSPI_HAS_WAN4
| RBSPI_HAS_USB
|
630 RBSPI_HAS_SSR
| RBSPI_HAS_POE
;
632 if (rbspi_platform_setup())
635 rbspi_952_750r2_setup(flags
);
639 * Init the hEX (PoE) lite hardware (QCA953x).
640 * The 750UP r2 (hEX PoE lite) is nearly identical to the hAP, only without
641 * WLAN. The 750 r2 (hEX lite) is nearly identical to the 750UP r2, only
642 * without USB and POE. It shares the same bootloader board identifier.
644 static void __init
rb750upr2_setup(void)
646 u32 flags
= RBSPI_HAS_WAN4
| RBSPI_HAS_SSR
;
648 if (rbspi_platform_setup())
651 /* differentiate the hEX lite from the hEX PoE lite */
652 if (strstr(mips_get_machine_name(), "750UP r2"))
653 flags
|= RBSPI_HAS_USB
| RBSPI_HAS_POE
;
655 rbspi_952_750r2_setup(flags
);
659 * Init the LHG hardware (AR9344).
660 * The LHG 5nD has a single ethernet port connected to PHY0.
661 * Wireless is provided via 5GHz WLAN1.
663 static void __init
rblhg_setup(void)
665 u32 flags
= RBSPI_HAS_WLAN1
| RBSPI_HAS_MDIO1
;
667 if (rbspi_platform_setup())
670 rbspi_peripherals_setup(flags
);
672 /* GMAC1 is HW MAC, WLAN1 MAC is HW MAC + 1 */
673 rbspi_network_setup(flags
, 0, 0, 1);
675 ath79_register_leds_gpio(-1, ARRAY_SIZE(rblhg_leds
), rblhg_leds
);
677 ath79_register_gpio_keys_polled(-1, RBSPI_KEYS_POLL_INTERVAL
,
678 ARRAY_SIZE(rblhg_gpio_keys
),
683 * Init the wAP hardware (EXPERIMENTAL).
684 * The wAP 2nD has a single ethernet port.
686 static void __init
rbwap_setup(void)
688 u32 flags
= RBSPI_HAS_WLAN0
;
690 if (rbspi_platform_setup())
693 rbspi_peripherals_setup(flags
);
695 /* GMAC1 is HW MAC, WLAN0 MAC is HW MAC + 1 */
696 rbspi_network_setup(flags
, 0, 1, 0);
698 ath79_register_leds_gpio(-1, ARRAY_SIZE(rbwap_leds
), rbwap_leds
);
702 * Init the cAP hardware (EXPERIMENTAL).
703 * The cAP 2nD has a single ethernet port, and a global LED switch.
705 static void __init
rbcap_setup(void)
707 u32 flags
= RBSPI_HAS_WLAN0
;
709 if (rbspi_platform_setup())
712 rbspi_peripherals_setup(flags
);
714 /* GMAC1 is HW MAC, WLAN0 MAC is HW MAC + 1 */
715 rbspi_network_setup(flags
, 0, 1, 0);
717 gpio_request_one(RBCAP_GPIO_LED_ALL
,
718 GPIOF_OUT_INIT_HIGH
| GPIOF_EXPORT_DIR_FIXED
,
721 ath79_register_leds_gpio(-1, ARRAY_SIZE(rbcap_leds
), rbcap_leds
);
725 * Init the mAP hardware (EXPERIMENTAL).
726 * The mAP 2nD has two ethernet ports, PoE output and an SSR for LED
729 static void __init
rbmap_setup(void)
731 u32 flags
= RBSPI_HAS_WLAN0
| RBSPI_HAS_SSR
| RBSPI_HAS_POE
;
733 if (rbspi_platform_setup())
736 rbspi_spi_cs_gpios
[1] = RBMAP_GPIO_SSR_CS
;
737 rbspi_peripherals_setup(flags
);
739 /* GMAC1 is HW MAC, WLAN0 MAC is HW MAC + 2 */
740 rbspi_network_setup(flags
, 0, 2, 0);
742 if (flags
& RBSPI_HAS_POE
)
743 gpio_request_one(RBMAP_GPIO_POE_POWER
,
744 GPIOF_OUT_INIT_HIGH
| GPIOF_EXPORT_DIR_FIXED
,
747 ath79_register_leds_gpio(-1, ARRAY_SIZE(rbmap_leds
), rbmap_leds
);
751 MIPS_MACHINE_NONAME(ATH79_MACH_RB_MAPL
, "map-hb", rbmapl_setup
);
752 MIPS_MACHINE_NONAME(ATH79_MACH_RB_941
, "H951L", rbhapl_setup
);
753 MIPS_MACHINE_NONAME(ATH79_MACH_RB_952
, "952-hb", rb952_setup
);
754 MIPS_MACHINE_NONAME(ATH79_MACH_RB_750UPR2
, "750-hb", rb750upr2_setup
);
755 MIPS_MACHINE_NONAME(ATH79_MACH_RB_LHG5
, "lhg", rblhg_setup
);
756 MIPS_MACHINE_NONAME(ATH79_MACH_RB_WAP
, "wap-hb", rbwap_setup
);
757 MIPS_MACHINE_NONAME(ATH79_MACH_RB_CAP
, "cap-hb", rbcap_setup
);
758 MIPS_MACHINE_NONAME(ATH79_MACH_RB_MAP
, "map2-hb", rbmap_setup
);