1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 model = "Sitecom WLR-7100 (X7 AC1200)";
10 compatible = "sitecom,wlr-7100", "qca,ar9344";
13 led-boot = &led_power;
14 led-failsafe = &led_power;
15 led-running = &led_power;
16 led-upgrade = &led_power;
20 compatible = "gpio-keys";
24 gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
25 linux,code = <KEY_RESTART>;
30 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
31 linux,code = <KEY_WPS_BUTTON>;
36 compatible = "gpio-leds";
40 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
44 label = "amber:power";
45 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
50 label = "blue:wlan2g";
51 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
52 linux,default-trigger = "phy1tpt";
60 pll-data = <0x06000000 0x00000101 0x00001616>;
76 phy0: ethernet-phy@0 {
80 qca,ar8327-initvals = <
81 0x04 0x87a00000 /* PORT0 PAD Mode */
82 0x0c 0x01000000 /* PORT6 PAD Mode */
83 0x10 0x80000000 /* PWS_REG_VALUE */
84 0x7c 0x000000fe /* PORT0_STATUS */
85 0x94 0x000000fe /* PORT6_STATUS */
94 compatible = "qcom,ath10k";
95 reg = <0x0000 0 0 0 0>;
96 nvmem-cells = <&cal_art_5000>;
97 nvmem-cell-names = "calibration";
102 clock-frequency = <25000000>;
109 compatible = "jedec,spi-nor";
111 spi-max-frequency = <25000000>;
114 compatible = "fixed-partitions";
115 #address-cells = <1>;
120 reg = <0x000000 0x030000>;
124 uenv: partition@30000 {
125 label = "u-boot-env";
126 reg = <0x030000 0x010000>;
131 compatible = "denx,uimage";
133 reg = <0x040000 0x750000>;
138 reg = <0x790000 0x010000>;
144 reg = <0x7a0000 0x050000>;
148 art: partition@7f0000 {
150 reg = <0x7f0000 0x010000>;
154 compatible = "fixed-layout";
155 #address-cells = <1>;
158 cal_art_5000: calibration@5000 {
159 reg = <0x5000 0x844>;