1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7 #include <dt-bindings/leds/common.h>
10 model = "Sitecom WLR-7100 (X7 AC1200)";
11 compatible = "sitecom,wlr-7100", "qca,ar9344";
14 led-boot = &led_power;
15 led-failsafe = &led_power;
16 led-running = &led_power;
17 led-upgrade = &led_power;
21 compatible = "gpio-keys";
25 gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
26 linux,code = <KEY_RESTART>;
31 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
32 linux,code = <KEY_WPS_BUTTON>;
37 compatible = "gpio-leds";
41 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
45 function = LED_FUNCTION_POWER;
46 color = <LED_COLOR_ID_AMBER>;
47 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
52 label = "blue:wlan2g";
53 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
54 linux,default-trigger = "phy1tpt";
62 pll-data = <0x06000000 0x00000101 0x00001616>;
78 phy0: ethernet-phy@0 {
82 qca,ar8327-initvals = <
83 0x04 0x87a00000 /* PORT0 PAD Mode */
84 0x0c 0x01000000 /* PORT6 PAD Mode */
85 0x10 0x80000000 /* PWS_REG_VALUE */
86 0x7c 0x000000fe /* PORT0_STATUS */
87 0x94 0x000000fe /* PORT6_STATUS */
96 compatible = "qcom,ath10k";
97 reg = <0x0000 0 0 0 0>;
98 nvmem-cells = <&cal_art_5000>;
99 nvmem-cell-names = "calibration";
104 clock-frequency = <25000000>;
111 compatible = "jedec,spi-nor";
113 spi-max-frequency = <25000000>;
116 compatible = "fixed-partitions";
117 #address-cells = <1>;
122 reg = <0x000000 0x030000>;
126 uenv: partition@30000 {
127 label = "u-boot-env";
128 reg = <0x030000 0x010000>;
133 compatible = "denx,uimage";
135 reg = <0x040000 0x750000>;
140 reg = <0x790000 0x010000>;
146 reg = <0x7a0000 0x050000>;
150 art: partition@7f0000 {
152 reg = <0x7f0000 0x010000>;
156 compatible = "fixed-layout";
157 #address-cells = <1>;
160 cal_art_5000: calibration@5000 {
161 reg = <0x5000 0x844>;