target/linux/ath79/dts/ar7161_dlink_dir-825-b1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "ar7100.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "dlink,dir-825-b1", "qca,ar7161";
  10         model = "D-Link DIR825B1";
  11
  12         aliases {
  13                 led-boot = &led_power_orange;
  14                 led-failsafe = &led_power_orange;
  15                 led-running = &led_power_blue;
  16                 led-upgrade = &led_power_orange;
  17         };
  18
  19         leds {
  20                 compatible = "gpio-leds";
  21
  22                 usb {
  23                         label = "blue:usb";
  24                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  25                         trigger-sources = <&usb_ohci_port>, <&usb_ehci_port>;
  26                         linux,default-trigger = "usbport";
  27                 };
  28
  29                 led_power_orange: power_orange {
  30                         label = "orange:power";
  31                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  32                         default-state = "on";
  33                 };
  34
  35                 led_power_blue: power_blue {
  36                         label = "blue:power";
  37                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  38                 };
  39
  40                 wps {
  41                         label = "blue:wps";
  42                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  43                 };
  44
  45                 planet_orange {
  46                         label = "orange:planet";
  47                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  48                 };
  49
  50                 planet_blue {
  51                         label = "blue:planet";
  52                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  53                 };
  54         };
  55
  56         ath9k-leds {
  57                 compatible = "gpio-leds";
  58
  59                 wlan2g {
  60                         label = "blue:wlan2g";
  61                         gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
  62                         linux,default-trigger = "phy0tpt";
  63                 };
  64
  65                 wlan5g {
  66                         label = "blue:wlan5g";
  67                         gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
  68                         linux,default-trigger = "phy1tpt";
  69                 };
  70         };
  71
  72         keys {
  73                 compatible = "gpio-keys";
  74
  75                 reset {
  76                         label = "reset";
  77                         linux,code = <KEY_RESTART>;
  78                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  79                 };
  80
  81                 wps {
  82                         label = "wps";
  83                         linux,code = <KEY_WPS_BUTTON>;
  84                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  85                 };
  86         };
  87
  88         rtl8366s {
  89                 compatible = "realtek,rtl8366s";
  90                 gpio-sda = <&gpio 5 GPIO_ACTIVE_HIGH>;
  91                 gpio-sck = <&gpio 7 GPIO_ACTIVE_HIGH>;
  92                 realtek,initvals = <0x06 0x0108>;
  93
  94                 mdio-bus {
  95                         #address-cells = <1>;
  96                         #size-cells = <0>;
  97                         status = "okay";
  98
  99                         phy4: ethernet-phy@4 {
 100                                 reg = <4>;
 101                                 phy-mode = "rgmii";
 102                         };
 103                 };
 104         };
 105
 106         virtual_flash {
 107                 compatible = "mtd-concat";
 108                 devices = <&fwconcat0 &fwconcat1>;
 109
 110                 partitions {
 111                         compatible = "fixed-partitions";
 112                         #address-cells = <1>;
 113                         #size-cells = <1>;
 114
 115                         partition@0 {
 116                                 compatible = "denx,uimage";
 117                                 label = "firmware";
 118                                 reg = <0x0 0x0>;
 119                         };
 120                 };
 121         };
 122 };
 123
 124 &usb1 {
 125         status = "okay";
 126 };
 127
 128 &usb2 {
 129         status = "okay";
 130 };
 131
 132 &usb_phy {
 133         status = "okay";
 134 };
 135
 136 &pcie0 {
 137         status = "okay";
 138
 139         ath9k0: wifi@0,11 {
 140                 compatible = "pci168c,0029";
 141                 reg = <0x8800 0 0 0 0>;
 142                 nvmem-cells = <&macaddr_lan 0>, <&cal_art_1000>;
 143                 nvmem-cell-names = "mac-address", "calibration";
 144                 #gpio-cells = <2>;
 145                 gpio-controller;
 146         };
 147
 148         ath9k1: wifi@0,12 {
 149                 compatible = "pci168c,0029";
 150                 reg = <0x9000 0 0 0 0>;
 151                 nvmem-cells = <&macaddr_wan 1>, <&cal_art_5000>;
 152                 nvmem-cell-names = "mac-address", "calibration";
 153                 #gpio-cells = <2>;
 154                 gpio-controller;
 155         };
 156 };
 157
 158 &spi {
 159         status = "okay";
 160
 161         flash@0 {
 162                 compatible = "jedec,spi-nor";
 163                 reg = <0>;
 164                 spi-max-frequency = <25000000>;
 165
 166                 partitions {
 167                         compatible = "fixed-partitions";
 168                         #address-cells = <1>;
 169                         #size-cells = <1>;
 170
 171                         partition@0 {
 172                                 label = "u-boot";
 173                                 reg = <0x000000 0x040000>;
 174                                 read-only;
 175                         };
 176
 177                         partition@40000 {
 178                                 label = "config";
 179                                 reg = <0x040000 0x010000>;
 180                                 read-only;
 181                         };
 182
 183                         fwconcat0: partition@50000 {
 184                                 label = "fwconcat0";
 185                                 reg = <0x050000 0x610000>;
 186                         };
 187
 188                         partition@660000 {
 189                                 label = "caldata";
 190                                 reg = <0x660000 0x010000>;
 191                                 read-only;
 192
 193                                 nvmem-layout {
 194                                         compatible = "fixed-layout";
 195                                         #address-cells = <1>;
 196                                         #size-cells = <1>;
 197
 198                                         cal_art_1000: cal@1000 {
 199                                                 reg = <0x1000 0xeb8>;
 200                                         };
 201
 202                                         cal_art_5000: cal@5000 {
 203                                                 reg = <0x5000 0xeb8>;
 204                                         };
 205
 206                                         macaddr_lan: macaddr@ffa0 {
 207                                                 compatible = "mac-base";
 208                                                 reg = <0xffa0 0x11>;
 209                                                 #nvmem-cell-cells = <1>;
 210                                         };
 211
 212                                         macaddr_wan: macaddr@ffb4 {
 213                                                 compatible = "mac-base";
 214                                                 reg = <0xffb4 0x11>;
 215                                                 #nvmem-cell-cells = <1>;
 216                                         };
 217                                 };
 218                         };
 219
 220                         fwconcat1: partition@670000 {
 221                                 label = "fwconcat1";
 222                                 reg = <0x670000 0x190000>;
 223                         };
 224                 };
 225         };
 226 };
 227
 228 &eth0 {
 229         status = "okay";
 230
 231         pll-data = <0x11110000 0x00001099 0x00991099>;
 232
 233         nvmem-cells = <&macaddr_lan 0>;
 234         nvmem-cell-names = "mac-address";
 235
 236         fixed-link {
 237                 speed = <1000>;
 238                 full-duplex;
 239         };
 240 };
 241
 242 &eth1 {
 243         status = "okay";
 244
 245         pll-data = <0x11110000 0x00001099 0x00991099>;
 246
 247         nvmem-cells = <&macaddr_wan 0>;
 248         nvmem-cell-names = "mac-address";
 249
 250         phy-handle = <&phy4>;
 251 };
 252