1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7 #include <dt-bindings/leds/common.h>
10 compatible = "siemens,ws-ap3610", "qca,ar7161";
11 model = "Siemens WS-AP3610";
14 led-boot = &led_power_green;
15 led-failsafe = &led_power_red;
16 led-running = &led_power_green;
17 led-upgrade = &led_power_red;
18 label-mac-device = ð0;
22 compatible = "gpio-leds";
24 led_power_green: led_power_green {
25 function = LED_FUNCTION_POWER;
26 color = <LED_COLOR_ID_GREEN>;
27 gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
30 led_power_red: led_power_red {
31 function = LED_FUNCTION_POWER;
32 color = <LED_COLOR_ID_RED>;
33 gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
38 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
39 linux,default-trigger = "phy0tpt";
43 label = "green:wlan5";
44 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
49 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
50 linux,default-trigger = "phy1tpt";
54 label = "green:wlan2";
55 gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
60 compatible = "gpio-keys";
64 linux,code = <KEY_RESTART>;
65 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
77 phy0: ethernet-phy@0 {
79 * When the compatible-is missing, PHY autodetection
80 * is performed, but the PHY-ID reads all 0xff.
82 * Linux does not create the device in this case,
83 * and the reset is never even de-asserted.
85 compatible = "ethernet-phy-id0143.bca2",
86 "ethernet-phy-ieee802.3-c22";
91 reset-assert-us = <10000>;
92 reset-deassert-us = <10000>;
99 phy-mode = "rgmii-id";
100 phy-handle = <&phy0>;
107 compatible = "jedec,spi-nor";
109 spi-max-frequency = <50000000>;
112 compatible = "fixed-partitions";
113 #address-cells = <1>;
123 label = "u-boot-bak";
124 reg = <0x40000 0x40000>;
129 compatible = "denx,uimage";
131 reg = <0x80000 0xe00000>;
136 reg = <0xe80000 0x40000>;
142 reg = <0xec0000 0x40000>;
148 reg = <0xf00000 0x40000>;
154 reg = <0xf40000 0x40000>;
160 reg = <0xf80000 0x40000>;
166 reg = <0xfc0000 0x40000>;