target/linux/ath79/dts/ar7240_tl-wr740n-v2.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar7240.dtsi"
   8
   9 / {
  10         compatible = "tplink,tl-wr740n-v2", "qca,ar7240";
  11         model = "TP-Link TL-WR740N v2";
  12
  13         aliases {
  14                 led-status = &led_system;
  15         };
  16
  17         memory@0 {
  18                 device_type = "memory";
  19                 reg = <0x0 0x2000000>;
  20         };
  21
  22         gpio-keys-polled {
  23                 compatible = "gpio-keys-polled";
  24                 #address-cells = <1>;
  25                 #size-cells = <0>;
  26                 poll-interval = <20>;
  27
  28                 reset {
  29                         label = "reset";
  30                         linux,code = <KEY_RESTART>;
  31                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  32                         debounce-interval = <60>;
  33                 };
  34
  35                 wps {
  36                         label = "wps";
  37                         linux,code = <KEY_WPS_BUTTON>;
  38                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  39                         debounce-interval = <60>;
  40                 };
  41         };
  42
  43         gpio-leds {
  44                 compatible = "gpio-leds";
  45                 pinctrl-names = "default";
  46                 pinctrl-0 = <&switch_led_pins>;
  47
  48                 led_system: system {
  49                         label = "tl-wr740n-v2:green:system";
  50                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  51                 };
  52
  53                 lan1 {
  54                         label = "tl-wr740n-v2:green:lan1";
  55                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  56                 };
  57
  58                 lan2 {
  59                         label = "tl-wr740n-v2:green:lan2";
  60                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  61                 };
  62
  63                 lan3 {
  64                         label = "tl-wr740n-v2:green:lan3";
  65                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  66                 };
  67
  68                 lan4 {
  69                         label = "tl-wr740n-v2:green:lan4";
  70                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  71                 };
  72
  73                 wan {
  74                         label = "tl-wr740n-v2:green:wan";
  75                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  76                 };
  77
  78                 wlan {
  79                         label = "tl-wr740n-v2:green:wlan";
  80                         gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
  81                         default-state = "off";
  82                         linux,default-trigger = "phy0tpt";
  83                 };
  84
  85                 wps {
  86                         label = "tl-wr740n-v2:green:wps";
  87                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  88                 };
  89         };
  90 };
  91
  92 &spi {
  93         status = "okay";
  94         num-cs = <1>;
  95
  96         flash@0 {
  97                 #address-cells = <1>;
  98                 #size-cells = <1>;
  99                 compatible = "jedec,spi-nor";
 100                 reg = <0>;
 101                 spi-max-frequency = <25000000>;
 102
 103                 partitions {
 104                         compatible = "fixed-partitions";
 105                         #address-cells = <1>;
 106                         #size-cells = <1>;
 107
 108                         uboot: partition@0 {
 109                                 reg = <0x0 0x20000>;
 110                                 label = "u-boot";
 111                                 read-only;
 112                         };
 113
 114                         firmware: partition@20000 {
 115                                 reg = <0x20000 0x3d0000>;
 116                                 label = "firmware";
 117                         };
 118
 119                         art: partition@3f0000 {
 120                                 reg = <0x3f0000 0x10000>;
 121                                 label = "art";
 122                                 read-only;
 123                         };
 124                 };
 125         };
 126 };
 127
 128 &eth0 {
 129         status = "okay";
 130
 131         phy-handle = <&phy4>;
 132
 133         mtd-mac-address = <&uboot 0x1fc00>;
 134         mtd-mac-address-increment = <(-1)>;
 135 };
 136
 137 &eth1 {
 138         status = "okay";
 139
 140         mtd-mac-address = <&uboot 0x1fc00>;
 141         mtd-mac-address-increment = <1>;
 142 };
 143
 144 &mdio0 {
 145         status = "okay";
 146
 147         phy4: ethernet-phy@4 {
 148                 reg = <4>;
 149                 phy-mode = "mii";
 150         };
 151 };
 152
 153 &pcie {
 154         status = "okay";
 155
 156         ath9k: wifi@168c,002b {
 157                 compatible = "pci168c,002b";
 158                 reg = <0x0000 0 0 0 0>;
 159                 qca,no-eeprom;
 160                 mtd-mac-address = <&uboot 0x1fc00>;
 161                 #gpio-cells = <2>;
 162                 gpio-controller;
 163         };
 164 };
 165
 166 &pinmux {
 167         switch_led_pins: pinmux_switch_led_pins {
 168                 pinctrl-single,bits = <0x0 0x0 0xf8>;
 169         };
 170 };
 171
 172 &uart {
 173         status = "okay";
 174 };