target/linux/ath79/dts/ar7241_tplink_tl-wr842n-v1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "ar7241.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "tplink,tl-wr842n-v1", "qca,ar7241";
  10         model = "TP-Link TL-WR842N/ND v1";
  11
  12         aliases {
  13                 led-boot = &led_system;
  14                 led-failsafe = &led_system;
  15                 led-running = &led_system;
  16                 led-upgrade = &led_system;
  17                 label-mac-device = &ath9k;
  18         };
  19
  20         keys {
  21                 compatible = "gpio-keys";
  22
  23                 rfkill {
  24                         label = "rfkill";
  25                         linux,code = <KEY_RFKILL>;
  26                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  27                         debounce-interval = <60>;
  28                 };
  29
  30                 reset {
  31                         label = "reset";
  32                         linux,code = <KEY_RESTART>;
  33                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  34                         debounce-interval = <60>;
  35                 };
  36         };
  37
  38         leds {
  39                 compatible = "gpio-leds";
  40
  41                 led_system: system {
  42                         label = "green:system";
  43                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  44                 };
  45
  46                 qss {
  47                         label = "green:qss";
  48                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  49                 };
  50
  51                 led3g {
  52                         label = "green:3g";
  53                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  54                         trigger-sources = <&hub_port>;
  55                         linux,default-trigger = "usbport";
  56                 };
  57         };
  58
  59         ath9k-leds {
  60                 compatible = "gpio-leds";
  61
  62                 wlan {
  63                         label = "green:wlan";
  64                         gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
  65                         linux,default-trigger = "phy0tpt";
  66                 };
  67         };
  68
  69         gpio-export {
  70                 compatible = "gpio-export";
  71
  72                 gpio_usb_power {
  73                         gpio-export,name = "tp-link:power:usb";
  74                         gpio-export,output = <1>;
  75                         gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
  76                 };
  77         };
  78 };
  79
  80 &usb {
  81         #address-cells = <1>;
  82         #size-cells = <0>;
  83         status = "okay";
  84
  85         hub_port: port@1 {
  86                 reg = <1>;
  87                 #trigger-source-cells = <0>;
  88         };
  89 };
  90
  91 &usb_phy {
  92         status = "okay";
  93 };
  94
  95 &spi {
  96         status = "okay";
  97
  98         num-cs = <1>;
  99
 100         flash@0 {
 101                 compatible = "jedec,spi-nor";
 102                 reg = <0>;
 103                 spi-max-frequency = <25000000>;
 104
 105                 partitions {
 106                         compatible = "fixed-partitions";
 107                         #address-cells = <1>;
 108                         #size-cells = <1>;
 109
 110                         uboot: partition@0 {
 111                                 reg = <0x0 0x20000>;
 112                                 label = "u-boot";
 113                                 read-only;
 114                         };
 115
 116                         partition@20000 {
 117                                 compatible = "tplink,firmware";
 118                                 reg = <0x20000 0x7d0000>;
 119                                 label = "firmware";
 120                         };
 121
 122                         partition@7f0000 {
 123                                 reg = <0x7f0000 0x10000>;
 124                                 label = "art";
 125                                 read-only;
 126                         };
 127                 };
 128         };
 129 };
 130
 131 &pcie {
 132         status = "okay";
 133
 134         ath9k: wifi@0,0 {
 135                 compatible = "pci168c,002e";
 136                 reg = <0x0000 0 0 0 0>;
 137                 #gpio-cells = <2>;
 138                 gpio-controller;
 139                 qca,no-eeprom;
 140                 mtd-mac-address = <&uboot 0x1fc00>;
 141         };
 142 };
 143
 144 &eth0 {
 145         status = "okay";
 146
 147         mtd-mac-address = <&uboot 0x1fc00>;
 148         mtd-mac-address-increment = <(-1)>;
 149 };
 150
 151 &eth1 {
 152         mtd-mac-address = <&uboot 0x1fc00>;
 153         mtd-mac-address-increment = <1>;
 154 };
 155
 156 &uart {
 157         status = "okay";
 158 };